Download VTU BE 2020 Jan ME Question Paper 17 Scheme 4th Sem 17MEA405 Metal Casting and Welding

--- Content provided by⁠ FirstRanker.com ---

Metal Casting and Welding
Time: 3 hrs. Max. Marks: 100
Note: Answer any FIVE full questions, choosing ONE full question from each module.
Module-1
1 a. Define pattern. What are the materials used for making pattern? Explain briefly. (10 Marks)

--- Content provided by‌ FirstRanker.com ---

b. Sketch and explain Sand Slinger Moulding Machine. (10 Marks)
OR
2 a. Explain investment moulding process with necessary sketches. List its advantages and
disadvantages. (10 Marks)
b. What are the functions of gating system? (04 Marks)

--- Content provided by‍ FirstRanker.com ---

c. Explain with neat diagram blind riser. (06 Marks)
Module-2
3 a. Sketch and explain Squeeze Casting process.
b. Explain with a neat diagram coreless induction furnace.
OR

--- Content provided by​ FirstRanker.com ---

4 a. Explain with a neat sketch cold chamber pressure die casting process.
b. Sketch and explain continuous casting process.
c. What are the advantages of semi centrifugal casting process?
Module-3
5 a. What are the solidification variables? Explain briefly.

--- Content provided by⁠ FirstRanker.com ---

b. Explain briefly the methods of removing gases in liquid metal with neat sketch.
OR
6 a. Sketch and explain the Stir casting process.
b. List the advantages and disadvantages of aluminum castings process.
c. Explain briefly Shrinkage defect.

--- Content provided by⁠ FirstRanker.com ---

Module-4
7 a. Explain with a neat sketch Tungsten Inert Gas (TIG) welding process.
b. Explain with neat diagram resistance welding process.
OR
8 a. Sketch and explain the laser welding process. (08 Marks)

--- Content provided by⁠ FirstRanker.com ---

b. What are the advantages, disadvantages and applications of electron beam welding process?
(08 Marks)
c. Explain briefly the principle of welding process. (04 Marks)
Module-5
9 a. What are the important effects of residual stress on welding process? (04 Marks)

--- Content provided by FirstRanker.com ---

b. Explain with a neat diagram oxy-acetylene welding process. (08 Marks)
c. Compare soldering, brazing and welding process. (08 Marks)
OR
10 a. Sketch and explain ultrasonic inspection method. Mention advantaes,anct_disadvantages of
ultrasonic C inspection method. ,Z) " - " : ? (10 Marks)

--- Content provided by‌ FirstRanker.com ---

b. With a neat sketch, explain radiography inspection method.
//
''; "----" ''?.:- , ' (10 Marks)
,,-","
-

--- Content provided by⁠ FirstRanker.com ---

? nIM
USN
(10 Marks)
(10 Marks)
(08 Marks)

--- Content provided by‍ FirstRanker.com ---

(08 Marks)
(04 Marks)
(10 Marks)
(10 Marks)
(08 Marks)

--- Content provided by‍ FirstRanker.com ---

(08 Marks)
(04 Marks)
(10 Marks)
(10 Marks)
FirstRanker.com - FirstRanker's Choice

--- Content provided by​ FirstRanker.com ---

c-.
\
1?
f/17MEA405
Fourth Semester B.E. Degree Examination, Dec 19. )fan.2020

--- Content provided by⁠ FirstRanker.com ---

Metal Casting and Welding
Time: 3 hrs. Max. Marks: 100
Note: Answer any FIVE full questions, choosing ONE full question from each module.
Module-1
1 a. Define pattern. What are the materials used for making pattern? Explain briefly. (10 Marks)

--- Content provided by‌ FirstRanker.com ---

b. Sketch and explain Sand Slinger Moulding Machine. (10 Marks)
OR
2 a. Explain investment moulding process with necessary sketches. List its advantages and
disadvantages. (10 Marks)
b. What are the functions of gating system? (04 Marks)

--- Content provided by‍ FirstRanker.com ---

c. Explain with neat diagram blind riser. (06 Marks)
Module-2
3 a. Sketch and explain Squeeze Casting process.
b. Explain with a neat diagram coreless induction furnace.
OR

--- Content provided by​ FirstRanker.com ---

4 a. Explain with a neat sketch cold chamber pressure die casting process.
b. Sketch and explain continuous casting process.
c. What are the advantages of semi centrifugal casting process?
Module-3
5 a. What are the solidification variables? Explain briefly.

--- Content provided by​ FirstRanker.com ---

b. Explain briefly the methods of removing gases in liquid metal with neat sketch.
OR
6 a. Sketch and explain the Stir casting process.
b. List the advantages and disadvantages of aluminum castings process.
c. Explain briefly Shrinkage defect.

--- Content provided by⁠ FirstRanker.com ---

Module-4
7 a. Explain with a neat sketch Tungsten Inert Gas (TIG) welding process.
b. Explain with neat diagram resistance welding process.
OR
8 a. Sketch and explain the laser welding process. (08 Marks)

--- Content provided by‌ FirstRanker.com ---

b. What are the advantages, disadvantages and applications of electron beam welding process?
(08 Marks)
c. Explain briefly the principle of welding process. (04 Marks)
Module-5
9 a. What are the important effects of residual stress on welding process? (04 Marks)

--- Content provided by FirstRanker.com ---

b. Explain with a neat diagram oxy-acetylene welding process. (08 Marks)
c. Compare soldering, brazing and welding process. (08 Marks)
OR
10 a. Sketch and explain ultrasonic inspection method. Mention advantaes,anct_disadvantages of
ultrasonic C inspection method. ,Z) " - " : ? (10 Marks)

--- Content provided by‍ FirstRanker.com ---

b. With a neat sketch, explain radiography inspection method.
//
''; "----" ''?.:- , ' (10 Marks)
,,-","
-

--- Content provided by​ FirstRanker.com ---

? nIM
USN
(10 Marks)
(10 Marks)
(08 Marks)

--- Content provided by FirstRanker.com ---

(08 Marks)
(04 Marks)
(10 Marks)
(10 Marks)
(08 Marks)

--- Content provided by‌ FirstRanker.com ---

(08 Marks)
(04 Marks)
(10 Marks)
(10 Marks)
17N1E45B/17MEB405

--- Content provided by​ FirstRanker.com ---

OR
4 a. With a neat sketch, explain principle of broaching process.
b. Explain with example working motion for following machining processes:
(i) Shaping (ii) Planning (iii) Slotting
(iv) Drilling (v) Lathe

--- Content provided by FirstRanker.com ---

Module-3
5 a. Explain the salient features of the following cutting tool materials:
(i) CBN (ii) Ceramics (iii) Cemented Carbides
b. What are the properties of a good cutting fluid?
. ?

--- Content provided by FirstRanker.com ---

Module-1
I a. Define machine tool. Give the classification of machine tool.
6 b. Explain with neat sketch working principle of horizontal milling machine.
A
..0

--- Content provided by​ FirstRanker.com ---

c00
? C
4-

. ?

--- Content provided by⁠ FirstRanker.com ---

cct
C
4)

C r.

--- Content provided by‍ FirstRanker.com ---

o
OR
2 a. With neat sketch explain the working principle of center type cylindrical grinding machine.
(12 Marks)
b.

--- Content provided by FirstRanker.com ---

Explain with neat sketch, quick return mechanism of shaper. (08 Marks)
Module-2
3 a. Explain the various machining parameters involved during turning operation on lathe
machine. (08 Marks)
b. Explain the following milling operations:

--- Content provided by​ FirstRanker.com ---

(i) Face milling (ii) Slab milling
(iii) Slotting (iv) Straddle milling
(08 Marks)
(12 Marks)
(12 Marks)

--- Content provided by‌ FirstRanker.com ---

(05 Marks)
(15 Marks)
(12 Marks)
(08 Marks)
0

--- Content provided by​ FirstRanker.com ---

z
ct
ct
Module-4
7 a. Derive an expression for shear angle in terms of chip thickness ratio and rake angle for

--- Content provided by FirstRanker.com ---

orthogonal cutting. (12 Marks)
b. What are the conditions favorable for built-up-edge formation'? (08 Marks)
OR
6 a. What is meant by tool signature'? Explain each term of a tool designated as:
8 ?12-10? 7-5-15-1.5 (10 Marks)

--- Content provided by FirstRanker.com ---

b.
Find the machining time required for machining a surface 600 x 800 mm on a shaping
machine. Assume cutting speed as 8m/min. The ratio of return to cutting stroke is 1:4 and
the feed is 2 mm/double stroke. The clearance at each end is 70 mm. (10 Marks)
, C O

--- Content provided by​ FirstRanker.com ---

-0
to c
C C0
't:/
"0 H

--- Content provided by‍ FirstRanker.com ---

'7-
L. 0

53
5

--- Content provided by​ FirstRanker.com ---

c"
.

eTS '42
S

--- Content provided by‍ FirstRanker.com ---

an 0
c rn
Q6-
E
e

--- Content provided by‍ FirstRanker.com ---

>
0
rsi
rA?
USN

--- Content provided by FirstRanker.com ---

Fourth Semester B.E. Degree Examination;ifec.2 9/Jan.2020
Machine Tools and Operations
Time: 3 hrs. Max. Marks: 100
Note: Answer any FIVE full questions, choosing ONE full question from each module.
I of 2

--- Content provided by‌ FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice
c-.
\
1?
f/17MEA405

--- Content provided by‌ FirstRanker.com ---

Fourth Semester B.E. Degree Examination, Dec 19. )fan.2020
Metal Casting and Welding
Time: 3 hrs. Max. Marks: 100
Note: Answer any FIVE full questions, choosing ONE full question from each module.
Module-1

--- Content provided by⁠ FirstRanker.com ---

1 a. Define pattern. What are the materials used for making pattern? Explain briefly. (10 Marks)
b. Sketch and explain Sand Slinger Moulding Machine. (10 Marks)
OR
2 a. Explain investment moulding process with necessary sketches. List its advantages and
disadvantages. (10 Marks)

--- Content provided by‍ FirstRanker.com ---

b. What are the functions of gating system? (04 Marks)
c. Explain with neat diagram blind riser. (06 Marks)
Module-2
3 a. Sketch and explain Squeeze Casting process.
b. Explain with a neat diagram coreless induction furnace.

--- Content provided by​ FirstRanker.com ---

OR
4 a. Explain with a neat sketch cold chamber pressure die casting process.
b. Sketch and explain continuous casting process.
c. What are the advantages of semi centrifugal casting process?
Module-3

--- Content provided by‌ FirstRanker.com ---

5 a. What are the solidification variables? Explain briefly.
b. Explain briefly the methods of removing gases in liquid metal with neat sketch.
OR
6 a. Sketch and explain the Stir casting process.
b. List the advantages and disadvantages of aluminum castings process.

--- Content provided by​ FirstRanker.com ---

c. Explain briefly Shrinkage defect.
Module-4
7 a. Explain with a neat sketch Tungsten Inert Gas (TIG) welding process.
b. Explain with neat diagram resistance welding process.
OR

--- Content provided by FirstRanker.com ---

8 a. Sketch and explain the laser welding process. (08 Marks)
b. What are the advantages, disadvantages and applications of electron beam welding process?
(08 Marks)
c. Explain briefly the principle of welding process. (04 Marks)
Module-5

--- Content provided by‌ FirstRanker.com ---

9 a. What are the important effects of residual stress on welding process? (04 Marks)
b. Explain with a neat diagram oxy-acetylene welding process. (08 Marks)
c. Compare soldering, brazing and welding process. (08 Marks)
OR
10 a. Sketch and explain ultrasonic inspection method. Mention advantaes,anct_disadvantages of

--- Content provided by FirstRanker.com ---

ultrasonic C inspection method. ,Z) " - " : ? (10 Marks)
b. With a neat sketch, explain radiography inspection method.
//
''; "----" ''?.:- , ' (10 Marks)
,,-","

--- Content provided by FirstRanker.com ---

-
? nIM
USN
(10 Marks)
(10 Marks)

--- Content provided by‌ FirstRanker.com ---

(08 Marks)
(08 Marks)
(04 Marks)
(10 Marks)
(10 Marks)

--- Content provided by FirstRanker.com ---

(08 Marks)
(08 Marks)
(04 Marks)
(10 Marks)
(10 Marks)

--- Content provided by⁠ FirstRanker.com ---

17N1E45B/17MEB405
OR
4 a. With a neat sketch, explain principle of broaching process.
b. Explain with example working motion for following machining processes:
(i) Shaping (ii) Planning (iii) Slotting

--- Content provided by‍ FirstRanker.com ---

(iv) Drilling (v) Lathe
Module-3
5 a. Explain the salient features of the following cutting tool materials:
(i) CBN (ii) Ceramics (iii) Cemented Carbides
b. What are the properties of a good cutting fluid?

--- Content provided by⁠ FirstRanker.com ---

. ?
Module-1
I a. Define machine tool. Give the classification of machine tool.
6 b. Explain with neat sketch working principle of horizontal milling machine.
A

--- Content provided by⁠ FirstRanker.com ---

..0
c00
? C
4-

--- Content provided by‍ FirstRanker.com ---

. ?
cct
C
4)

--- Content provided by​ FirstRanker.com ---

C r.
o
OR
2 a. With neat sketch explain the working principle of center type cylindrical grinding machine.
(12 Marks)

--- Content provided by‌ FirstRanker.com ---

b.
Explain with neat sketch, quick return mechanism of shaper. (08 Marks)
Module-2
3 a. Explain the various machining parameters involved during turning operation on lathe
machine. (08 Marks)

--- Content provided by​ FirstRanker.com ---

b. Explain the following milling operations:
(i) Face milling (ii) Slab milling
(iii) Slotting (iv) Straddle milling
(08 Marks)
(12 Marks)

--- Content provided by‌ FirstRanker.com ---

(12 Marks)
(05 Marks)
(15 Marks)
(12 Marks)
(08 Marks)

--- Content provided by‌ FirstRanker.com ---

0
z
ct
ct
Module-4

--- Content provided by‍ FirstRanker.com ---

7 a. Derive an expression for shear angle in terms of chip thickness ratio and rake angle for
orthogonal cutting. (12 Marks)
b. What are the conditions favorable for built-up-edge formation'? (08 Marks)
OR
6 a. What is meant by tool signature'? Explain each term of a tool designated as:

--- Content provided by‌ FirstRanker.com ---

8 ?12-10? 7-5-15-1.5 (10 Marks)
b.
Find the machining time required for machining a surface 600 x 800 mm on a shaping
machine. Assume cutting speed as 8m/min. The ratio of return to cutting stroke is 1:4 and
the feed is 2 mm/double stroke. The clearance at each end is 70 mm. (10 Marks)

--- Content provided by​ FirstRanker.com ---

, C O
-0
to c
C C0
't:/

--- Content provided by FirstRanker.com ---

"0 H
'7-
L. 0

53

--- Content provided by​ FirstRanker.com ---

5
c"
.

eTS '42

--- Content provided by‌ FirstRanker.com ---

S
an 0
c rn
Q6-
E

--- Content provided by‍ FirstRanker.com ---

e
>
0
rsi
rA?

--- Content provided by​ FirstRanker.com ---

USN
Fourth Semester B.E. Degree Examination;ifec.2 9/Jan.2020
Machine Tools and Operations
Time: 3 hrs. Max. Marks: 100
Note: Answer any FIVE full questions, choosing ONE full question from each module.

--- Content provided by FirstRanker.com ---

I of 2
17ME45B/17MEB41,
OR
8 a. A 12 mm hole is to be drilled through a 20 mm thick plate. The cutting speed is 12 in/min
and the feed rate is 0.12 mm/rev. Estimate the machining time. Take the over travel plus

--- Content provided by‍ FirstRanker.com ---

clearance of the tool as 5 mm. (10 Marks)
b. The following details relates to an orthogonal cutting operation. Feed = 1.25 mm/rev, chip
thickness = 2 mm, rake angle of tool = 10?. Calculate :
(i) Chip thickness ratio and shear angle
(ii) If the shear strength is 6000 kg/cm`, width of cut = 10 mm, cutting speed = 30 mpm and

--- Content provided by⁠ FirstRanker.com ---

coefficient of friction = 0.9, determine the following:
(1) shearing force (2) friction angle (3) cutting force (10 Marks)
Module-5
9 a. What is tool wear? Why does the tool fail during cutting? Explain giving reasons. (10 Marks)
b. Write short notes on Taylor's tool life equation. (10 Marks)

--- Content provided by⁠ FirstRanker.com ---

OR
10 a. List the cutting conditions which have an important influence upon metal cutting in
machining. (12 Marks)
b. A 50 mm bar of steel was turned at 284 rpm and tool failure occurred after 10 min. The
speed was changed to 232 rpm and the tool failed in 60 min of cutting time. What cutting

--- Content provided by FirstRanker.com ---

speed should be used to obtain 30 mins of tool life? (08 Marks)
"
2 of 2
FirstRanker.com - FirstRanker's Choice