Download JNTUA B.Tech 1-1 R13 2014 June Regular 13A51101 Engineering Chemistry Question Paper

FirstRanker.com

Code: 13A51101

B.Tech I Year (R13) Regular Examinations June/July 2014

--- Content provided by FirstRanker.com ---

ENGINEERING CHEMISTRY

(Common to all branches)

Time: 3 hours

Max. Marks: 70

Part - A

--- Content provided by‌ FirstRanker.com ---

(Compulsory Question)

Answer the following: (10 X 02 = 20 M)

1. Why is calgon conditioning better than phosphate conditioning?
2. Write short note on chlorination.
3. Give brief note on electroplating.

--- Content provided by​ FirstRanker.com ---

4. What is anodic protection? Give suitable examples.
5. What is addition polymerization?
6. How nature rubber is processed?
7. Define cetane number. What is its significance?
8. Explain manufacture of coke.

--- Content provided by​ FirstRanker.com ---

9. Define aniline point and pour point.
10. Write brief note on rocket propellants.

Part - B

(Answer all five units, 05 X 10 = 50 M)

Unit - I

--- Content provided by​ FirstRanker.com ---

1. What is the principle of EDTA method? Describe the estimation of hardness of water by EDTA method.

OR

3. (a) Explain scale and sludge formation.
4. (b) What is priming and foaming?

Unit - II

--- Content provided by FirstRanker.com ---

4. Describe the method employed for the refining of crude oil with diagram.

OR

5. The percentage composition of a sample of coal by weight was found to be C=75%: H=6.2%, O=12.8%: N=2.5% S=1.4%, the remaining being ash. Calculate the minimum (a) weight and (b) volume at NTP of air necessary for complete combustion of 1 kg of coal and percentage composition by weight of dry products; if 50% excess air is supplied.

Unit - III

6. (a) Distinguish the thermoplastics and thermosettings.

--- Content provided by​ FirstRanker.com ---

7. (b) Discuss the preparation of PVC and nylons.

OR

7. (a) Explain conducting polymers, with examples.
8. (b) Write note on compounding of rubber.

Unit - IV

--- Content provided by‍ FirstRanker.com ---

8. Explain factors effecting the corrosion.

OR

9. Explain dry and wet corrosion with example.

Unit - V

10. What are the constituents of cement? Discuss the mechanism of setting and hardening of cement.

--- Content provided by FirstRanker.com ---

OR

11. How will you manufacture portland cement by wet process?

FirstRanker.com