--- Content provided by FirstRanker.com ---B.Tech I Year II Semester (R15) Supplementary Examinations December 2019
ENGINEERING DRAWING
(Common to ECE, FT & EIE)
Time: 3 hours Max. Marks: 70
(Answer all five units, 05 X 14 = 70 Marks)
*****
1 Draw an epicycloid, the directing circle of which is 160 mm in diameter and the generating circle is
40 mm in diameter. Draw a tangent and normal to the curve at any point on it.
OR
UNIT ? II
3 (a) A point P is 20 mm from both the reference planes. Draw its projections in all possible positions.
behind VP. The distance between their projectors is 75 mm. The line joining the top views of points
P and Q makes an angle of 45
0
with XY. Determine the distance of point Q from VP.
4 (a) Draw the projections of point A in the following positions:
(i) 20 mm below HP and 30 mm behind VP.
(ii) 15 mm above HP and 50 mm behind VP.
(iii) 40 mm below HP and 25 mm in front of VP.
(b) Find the shortest distance of point A from the reference line XY which is 20 mm from the HP and
40 mm from the VP.
UNIT ? III
5 A line AB 75 mm long has its end point A 15 mm above HP and 10 mm in front of VP and end point
B 45 mm above HP and 50 mm in front of VP. Determine true inclination of line AB with HP and
VP.
OR
an angle of 45
0
to HP. And the straight edge makes an angle of 30
0
UNIT ? IV
7 A hexagonal pyramid, side of base 35 mm and axis 50 mm long, rests with its base on HP and an
OR
8 A square pyramid of base edge 25 mm and height of its axis 50 mm in resting in HP in such a
manner that its base edge makes an angle of 45
0
UNIT ? V
9 Draw the isometric view of a cylinder of 40 mm diameter and 50 mm height resting on HP.
10 Draw the isometric projection of a square prism of side 35 mm and height 50 mm.
*****
R15
FirstRanker.com - FirstRanker's Choice
ENGINEERING DRAWING
(Common to ECE, FT & EIE)
Time: 3 hours Max. Marks: 70
--- Content provided by FirstRanker.com ---
(Answer all five units, 05 X 14 = 70 Marks)
*****
--- Content provided by FirstRanker.com ---
UNIT ? I1 Draw an epicycloid, the directing circle of which is 160 mm in diameter and the generating circle is
40 mm in diameter. Draw a tangent and normal to the curve at any point on it.
OR
--- Content provided by FirstRanker.com ---
2 Draw a parabola when the distance of focus from the directrix is equal to 40 mm.UNIT ? II
3 (a) A point P is 20 mm from both the reference planes. Draw its projections in all possible positions.
--- Content provided by FirstRanker.com ---
(b) Two points P and Q are located in HP. The point P is 30 mm in front of VP and point Q is locatedbehind VP. The distance between their projectors is 75 mm. The line joining the top views of points
P and Q makes an angle of 45
0
with XY. Determine the distance of point Q from VP.
--- Content provided by FirstRanker.com ---
OR4 (a) Draw the projections of point A in the following positions:
(i) 20 mm below HP and 30 mm behind VP.
(ii) 15 mm above HP and 50 mm behind VP.
(iii) 40 mm below HP and 25 mm in front of VP.
--- Content provided by FirstRanker.com ---
(iv) 50 mm above HP and 30 mm in front of VP.(b) Find the shortest distance of point A from the reference line XY which is 20 mm from the HP and
40 mm from the VP.
UNIT ? III
--- Content provided by FirstRanker.com ---
5 A line AB 75 mm long has its end point A 15 mm above HP and 10 mm in front of VP and end point
B 45 mm above HP and 50 mm in front of VP. Determine true inclination of line AB with HP and
VP.
OR
--- Content provided by FirstRanker.com ---
6 A semi-circular lamina of 64 mm diameter has its straight edge in VP and the surface is inclined atan angle of 45
0
to HP. And the straight edge makes an angle of 30
0
--- Content provided by FirstRanker.com ---
to VP. Draw its projections.UNIT ? IV
7 A hexagonal pyramid, side of base 35 mm and axis 50 mm long, rests with its base on HP and an
--- Content provided by FirstRanker.com ---
edge of its base is perpendicular to VP. Draw the orthographic projection of the hexagonal pyramid.OR
8 A square pyramid of base edge 25 mm and height of its axis 50 mm in resting in HP in such a
manner that its base edge makes an angle of 45
0
--- Content provided by FirstRanker.com ---
with VP. Develop the surface of the pyramid.UNIT ? V
9 Draw the isometric view of a cylinder of 40 mm diameter and 50 mm height resting on HP.
--- Content provided by FirstRanker.com ---
OR10 Draw the isometric projection of a square prism of side 35 mm and height 50 mm.
*****
--- Content provided by FirstRanker.com ---
R15
FirstRanker.com - FirstRanker's Choice