ENGINEERING DRAWING
(Common to ME and IT)
Time: 3 hours Max. Marks: 70
--- Content provided by FirstRanker.com ---
(Answer all five units, 05 X 14 = 70 Marks)
*****
UNIT ? I
--- Content provided by FirstRanker.com ---
1 A parallelogram has sides 130 mm and 80 mm at an included angle of 60
0
. Inscribe an ellipse in the
parallelogram. Find the major and minor axes of the ellipse.
--- Content provided by FirstRanker.com ---
OR2 A circle of 50 mm diameter rolls along a line. A point in the circumference of the circle is in contact with
the line in the beginning and after one complete revolution. Draw the cycloidal path of the point. Draw
an tangent and normal at any point on the curve.
--- Content provided by FirstRanker.com ---
UNIT ? II3 Construct a diagonal scale of R.F. 1:20 showing divisions of 0.01 m and capable of measuring 3 meter.
Mark a distance of 2.37 m on it.
OR
--- Content provided by FirstRanker.com ---
4 A point is 30mm in front of VP, 20 mm above HP and 25 mm in front of the left PP. Draw its projections.UNIT ? III
5 A line AB 60 mm long has one of its extremities 20 mm in front of VP and 15 mm above HP. The line is
--- Content provided by FirstRanker.com ---
inclined at 250
to HP and 40
0
to VP. Draw its top and front views.
--- Content provided by FirstRanker.com ---
OR6 A hexagonal lamina of 30 mm sides on HP on one of its sides. The side which is on HP is perpendicular
to the VP and the surface of the lamina is inclined to the HP at 45
0
. The lamina is then rotated through
--- Content provided by FirstRanker.com ---
900
such that the side on HP is parallel to the VP, while the surface is still inclined to the HP at 45
0
.
--- Content provided by FirstRanker.com ---
Draw the front view and top view of the lamina in its final position.UNIT ? IV
7 An equilateral triangular prism 20 mm side of base and 50 mm long rests with one of its shorter edges
--- Content provided by FirstRanker.com ---
on HP such that the rectangular face containing the edge on which the prism rests is inclined at 300
to
HP. The edge on which the prism rests is inclined at 60
0
--- Content provided by FirstRanker.com ---
to the VP. Draw its projections.OR
8 A square prism of base side 30 mm and axis length 60 mm is resting on HP on its base with a side of
base inclined at 30
0
--- Content provided by FirstRanker.com ---
to VP. It is cut by a plane inclined at 400
to HP and perpendicular to VP and is
bisecting the axis. Draw the development of the remaining part of the prism.
--- Content provided by FirstRanker.com ---
Contd. in page 2--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
Page 1 of 2
--- Content provided by FirstRanker.com ---
R15FirstRanker.com - FirstRanker's Choice
Code: 15A03101b
--- Content provided by FirstRanker.com ---
B.Tech I Year II Semester (R15) Supplementary Examinations November 2017
ENGINEERING DRAWING
(Common to ME and IT)
--- Content provided by FirstRanker.com ---
Time: 3 hours Max. Marks: 70
(Answer all five units, 05 X 14 = 70 Marks)
*****
--- Content provided by FirstRanker.com ---
UNIT ? I
1 A parallelogram has sides 130 mm and 80 mm at an included angle of 60
0
--- Content provided by FirstRanker.com ---
. Inscribe an ellipse in theparallelogram. Find the major and minor axes of the ellipse.
OR
2 A circle of 50 mm diameter rolls along a line. A point in the circumference of the circle is in contact with
the line in the beginning and after one complete revolution. Draw the cycloidal path of the point. Draw
--- Content provided by FirstRanker.com ---
an tangent and normal at any point on the curve.UNIT ? II
3 Construct a diagonal scale of R.F. 1:20 showing divisions of 0.01 m and capable of measuring 3 meter.
--- Content provided by FirstRanker.com ---
Mark a distance of 2.37 m on it.OR
4 A point is 30mm in front of VP, 20 mm above HP and 25 mm in front of the left PP. Draw its projections.
UNIT ? III
--- Content provided by FirstRanker.com ---
5 A line AB 60 mm long has one of its extremities 20 mm in front of VP and 15 mm above HP. The line is
inclined at 25
0
to HP and 40
--- Content provided by FirstRanker.com ---
0to VP. Draw its top and front views.
OR
6 A hexagonal lamina of 30 mm sides on HP on one of its sides. The side which is on HP is perpendicular
to the VP and the surface of the lamina is inclined to the HP at 45
--- Content provided by FirstRanker.com ---
0. The lamina is then rotated through
90
0
such that the side on HP is parallel to the VP, while the surface is still inclined to the HP at 45
--- Content provided by FirstRanker.com ---
0.
Draw the front view and top view of the lamina in its final position.
UNIT ? IV
--- Content provided by FirstRanker.com ---
7 An equilateral triangular prism 20 mm side of base and 50 mm long rests with one of its shorter edges
on HP such that the rectangular face containing the edge on which the prism rests is inclined at 30
0
to
--- Content provided by FirstRanker.com ---
HP. The edge on which the prism rests is inclined at 600
to the VP. Draw its projections.
OR
8 A square prism of base side 30 mm and axis length 60 mm is resting on HP on its base with a side of
--- Content provided by FirstRanker.com ---
base inclined at 300
to VP. It is cut by a plane inclined at 40
0
to HP and perpendicular to VP and is
--- Content provided by FirstRanker.com ---
bisecting the axis. Draw the development of the remaining part of the prism.Contd. in page 2
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
Page 1 of 2
--- Content provided by FirstRanker.com ---
R15
Code: 15A03101b
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
UNIT ? V
9 Draw the isometric view of a hexagonal prism of base side 30 mm and axis length 60 mm rests on HP
on one of its rectangular faces with its axis perpendicular to VP.
--- Content provided by FirstRanker.com ---
OR10 Draw the front view, top view and right side view of the object shown below.
--- Content provided by FirstRanker.com ---
*****--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
Page 2 of 2
R15
--- Content provided by FirstRanker.com ---
FirstRanker.com - FirstRanker's Choice