Download PTU B-Tech ME 2020 Dec 4th Sem 59132 Applied Thermodynamics Ii Question Paper

Roll No. Total No. of Pages : 02

Total No. of Questions: 18

B.Tech. (ME) (2012 Onwards) (Sem.-4)

--- Content provided by⁠ FirstRanker.com ---

APPLIED THERMODYNAMICS-II

Subject Code: BTME-404

M.Code : 59132

Time : 3 Hrs. Max. Marks : 60

INSTRUCTIONS TO CANDIDATES :

--- Content provided by FirstRanker.com ---

1. SECTION-A is COMPULSORY consisting of TEN questions carrying TWO marks each.
2. SECTION-B contains FIVE questions carrying FIVE marks each and students have to attempt any FOUR questions.
3. SECTION-C contains THREE questions carrying TEN marks each and students have to attempt any TWO questions.

SECTION-A

Answer briefly :

--- Content provided by FirstRanker.com ---

1. Draw Brayton cycle.
2. What is effect of clearance in working of reciprocating air compressor?
3. What is surging and choking?
4. What do you mean by degree of reaction?
5. List merits of gas turbines over IC engines.

--- Content provided by​ FirstRanker.com ---

6. Name the different components of axial flow compressors.
7. State the assumptions made in an ideal cycle's analysis of gas turbine.
8. Define Work Ratio and Temperature Ratio.
9. What is the principle of jet propulsion?
10. What is Turbojet?

--- Content provided by​ FirstRanker.com ---

SECTION-B

11. A simple closed cycle gas turbine plant receives air at 1 bar and 15°C and compressor it to 5 bar and then heats it to 800°C in the heating chamber. The hot air expands in a turbine back to 1 bar. Calculate the power developed per kg of air supplied per second. Take Cp for air as 1 kJ/kgK.

SECTION-C

16. A centrifugal compressor delivers 580 m³ of free air when running at 800 rpm. Using the following data: inlet pressure and temperature of air = 1.013 bar and 20°C, compressor ratio = 3.5, isentropic efficiency = 83%, flow velocity throughout the compressor = 62 m/s, the blades are radial at the outlet of the impeller tip diameter = 2 times eye diameter, blade area coefficient = 10.94. Find:
    1. The input power required to run the compressor.
    2. Impeller diameters at inlet and outlet.

    --- Content provided by⁠ FirstRanker.com ---

    3. Breadth of impeller at inlet.
    4. Impeller blade angle at inlet.
17. Draw T-S diagram for a single stage reciprocating air compressor and explain it.
18. Explain :
    1. Difference between adiabatic and isentropic process.

    --- Content provided by⁠ FirstRanker.com ---

    2. Function of impeller and diffusion in centrifugal compressor.

NOTE: Disclosure of Identity by writing Mobile No. or Making of passing request on any page of Answer Sheet will lead to UMC against the Student.

FirstRanker.com

--- Content provided by⁠ FirstRanker.com ---