Download PTU B-Tech EEE 2020 Dec 6th Sem 72843 Microwave And Radar Engineering Question Paper

Download PTU (I.K.Gujral Punjab Technical University (IKGPTU)) B-Tech (Bachelor of Technology) (EEE)- Electrical And Electronics Engineering 2020 December 6th Sem 72843 Microwave And Radar Engineering Previous Question Paper

Roll No.
Total No. of Pages : 02
Total No. of Questions : 18
B.Tech. (Electronics Engineering) (2012 to 2017) / (EE) (Sem.?6)
MICROWAVE AND RADAR ENGINEERING
Subject Code : BTEEE-603B
M.Code : 72843
Time : 3 Hrs. Max. Marks : 60
INST RUCT IONS T O CANDIDAT ES :
1 .
SECT ION-A is COMPULSORY cons is ting of TEN questions carrying TWO marks
each.
2 .
SECT ION-B c ontains F IVE questions c arrying FIVE marks eac h and s tud ents
have to atte mpt any FOUR q ues tions.
3 .
SECT ION-C contains THREE questions carrying T EN marks e ach and s tudents
have to atte mpt any T WO questio ns.
SECTION-A
Answer briefly :
1.
Write down the properties of scattering matrix.
2.
What are the advantages of cross field amplifiers?
3.
Write down the characterises of PIN diode.
4.
What do you understand with skin effect?
5.
Define modes of microwave bipolar transistors.
6.
Compare horizontal and vertical scanning techniques.
7.
What do you understand with range ambiguities?
8.
Draw block diagram of MTI radar with proper notations.
9.
What are the applications of ferrite devices?
10. Define SWR and matched termination.
1 | M-72843
(S2)-1060

---

SECTION-B
11. Explain the principle of operation, characteristics and applications of Klystron. Also
discuss velocity modulation in detail.
12. What is the role of S parameters in microwave devices? How tunnelling effect take place in
tunnel diode?
13. With the help of suitable diagram discuss the working of magnetron. Also explain the role
of slow wave structure in TWT.
14. Discuss different methods of power measurement. Also discuss the working of IMPATT.
15. Explain bunching process. Discuss working of circulator also obtained its S matrix.
SECTION-C
16. What do you understand by lobe switching? Calculate the maximum range of Radar for the
specifications:
Peak power transmitted by the radar = 250KW;
Gain of transmitting antenna = 4000;
Effective aperture of the receiving Antenna = 4m2 ;
Radar cross section of the target = 25m2;
Power of minimum detectable signal = 10?12W.
17. Derive RADAR range equation and explain the factors that affect maximum range of
RADAR.
18. Write short notes on :
a. Cavity resonator
b. Microwave bridge
NOTE : Disclosure of Identity by writing Mobile No. or Making of passing request on any
page of Answer Sheet will lead to UMC against the Student.
2 | M-72843
(S2)-1060

---