Download JNTU Kakinada (Jawaharlal Nehru Technological University, Kakinada) M.Tech (Master of Technology) R19 Civil M.Tech Structural Engineering And Srtrul Design Course Structure and Syllabus
KAKINADA ? 533 003, Andhra Pradesh, India
DEPARTMENT OF CIVIL ENGINEERING
M.TECH COURSE STRUCTURE & SYLLABUS
(Common to Structural Engineering and Structural Design)
(Applicable for batches admitted from 2019-2020)
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY KAKINADA
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
I - Semester
S.No
Course Name
Category L
T
P
C
Marks
1
Theory of Elasticity
Core
3
0
--
3
100
2
Structural Dynamics
Core
3
0
--
3
100
3
Elective I
Elective
3
0
--
3
100
a) Matrix Analysis of Structures
b) Analytical & Numerical Methods for
Structural Engineering
c) Design of RCC Foundations
4
Program Elective II
Elective
3
0
--
3
100
a) Bridge Engineering
b) Repair
and
Rehabilitation
of
Structures
c) Advanced
Reinforced
Concrete
Design
5
Advanced Concrete Technology
2
0
0
2
100
6
Advanced
Concrete
Technology
Lab
-
--
4
2
100
Laboratory
7
Advanced
Structural
Engineering
Lab
-
--
4
2
100
Laboratory
8
Audit Course ?1
Audit
2
0
0
0
100
Total Credits /Marks
18
800
II ? Semester
S.No.
Course Name
Category
L
T
P
C
Marks
1
Finite Element Methods in Structural
Core
3
0
--
3
100
Engineering
2
Theory of Plates and Shells
Core
3
0
--
3
100
3
Elective III
Elective
3
0
--
3
100
a) Stability of Structures
b) Advanced Steel Design
c) Analysis of Offshore Structures
4
Elective IV
Elective
3
0
--
3
100
a) Earthquake Resistant Design of
Buildings
b) Precast and Prefabricated Structures
c) Earth Retaining Structures
5
Computer Aided Design Laboratory
--
--
4
2
100
6
Structural Design laboratory
Lab
--
--
4
2
100
7
Mini Project With Seminar
0
0
4
2
100
8
Audit Course -2
Audit
2
0
0
0
100
Total Credits / Marks
18
800
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
III ? Semester
S.No.
Course Name
Category
L T
P
C
Marks
1
Elective 5: Program Elective
Elective
3
0
--
3
100
/MOOCS**
a) Design
of
Pre-stressed
Concrete structures
b) Structural Health Monitoring
c) Industrial Structures
2
Open Elective / MOOCS**
Elective
3
0
--
3
100
a) Operations Research
b) Construction Management
c) Green Technology
3
Dissertation Phase-I / Industrial
-- -- 20 10
Project (To be continued and
Evaluated next Semester)*
Total Credits / Marks
16
200
* Evaluated and displayed in 4th Semester marks list
** Students Going for Industrial Project / Thesis will complete these courses through
MOOCS. Students can also choose SWAYAM or NPTEL with a 12 weeks course
duration in PG level with 3 credits, but the chosen subject should not be covered in their
M. Tech Course.
IV - Semester
Sl No.
Course Name
Category
L T
P
C
Marks
1
Project / Dissertation Phase II
0
0 32 16
100
(Continued from III Semester)
Total Credits / Marks
16
100
Audit course 1 & 2
1. English for Research PaperWriting
2. DisasterManagement
3. Sanskrit for TechnicalKnowledge
4. ValueEducation
5. Constitution of India
6. PedagogyStudies
7. Stress Management byYoga
8. Personality Development through Life Enlightenment Skills.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - I Semester
3
0
0
3
THEORY OF ELASTICITY (Program Core1)
Program Educational Objectives
PEO1
Impart advanced technical knowledge and skills for specialized careers in structural
Engineering and related fields that caters to the Global needs.
PEO2
Provide expertise in carrying out project works in advanced structural engineering by
using state -of -art computing, numerical and experimental techniques and to develop
interdisciplinary research.
PEO3
Train the students to possess good communication and presentation skills with ability to
work in teams and contributing significantly to the technological development of the
Nation
Course Outcomes: At the end of the course, the student will be able to
CO1
Know the definition of stress and deformation and how to determine the components of the
stress and strain tensors.
CO2
Apply the conditions of compatibility and equations of equilibrium.
CO3
Understand how to express the mechanical characteristics of materials, constitutive
equations and generalized Hook law.
CO4
Use the equilibrium equations stated by the displacements and compatibility conditions
stated by stresses
CO5
Understand index notation of equations, tensor and matrix notation and define state of
plane stress, state of plane strain
CO6
Be able to analyze real problem and to formulate the conditions of theory of elasticity
Applications
CO7
Determine the boundary restrictions in calculations. Solve the basic problems of the theory
of elasticity by using Airy function expressed as bi harmonic function
Detailed Syllabus:
UNIT: 1
Elasticity ? Notation for forces and stresses ? components of stresses and strains ? Hooke's Law
Plane Stress ? Plane strain ? Differential Equations of equilibrium ? Boundary conditions ?
Compatibility equations Stress function ? Boundary Conditions.
UNIT: 2
Two dimensional problems in rectangular coordinates ? Solution by polynomials ? Saint
Venant's principle ? Determination of displacements ? Bending of simple beams ? Application
of Fourier series for two dimensional problems for gravity loading
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
UNIT: 3
Two dimensional problems in polar coordinates General equations in polar coordinates ?
Stress distribution for problems having symmetrical about an axis Strain components in polar
coordinates? Displacements for symmetrical stress distributions Stresses for plates with
circular holes subjected to far field tension ? stress concentration factor.
UNIT: 4
Analysis of stress and strain in three dimension Principal stresses ? Stress ellipsoid and stress
director surface ? Determination of principal stresses Maximum shear stress ? Homogeneous
Deformation ? General Theorems Differential equations of equilibrium ? Conditions of
compatibility? Equations of equilibrium in terms of displacements ? Principle of superposition ?
Uniqueness of solution ?Reciprocal theorem..
UNIT: 5
Torsion of Prismatic bars ? Bars with elliptical cross section ? Other elementary solution ?
Membrane analogy ? Torsion of rectangular bars ? Solution of Torsional problems by energy
method.
TEXT BOOKS
1. Theory of Elasticity Stephen Timoshenko & J. N. Goodier, Mc.Grawhill Publishers
2. Advanced Mechanics of Solids L.S. Srinath, McGraw Hill Publishers
REFERENCES
1. Elasticity: Theory, Applications and Numeric Martin H. Sadd, Wiley Publishers
3. Theory of Elasticity -Sadhu Singh 3rd Edition, Khanna Publishers
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - I Semester
3
0
0
3
STRUCTURAL DYNAMICS (Program Core 2)
Course Outcomes: At the end of the course, the student will be able to
CO1
Understand the response of structural systems to dynamic loads
CO2
Realize the behavior and response of linear and nonlinear SDOF and MDOF structures
with various dynamic loading
CO3
Understand the behavior and response of MDOF structures with various dynamic
loading.
CO4
Possess the ability to find out suitable solution for continuous system
CO5
Understand the behavior of structures subjected to dynamic loads under free vibration
CO6
Understand the behavior of structures subjected to dynamic loads Harmonic excitation
and earthquake load
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
3
1
1
1
CO2
3
1
1
1
CO3
3
1
1
1
CO4
3
1
1
1
C05
1
3
1
1
1
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
UNIT I:
Theory of vibrations: Introduction - Elements of vibratory system - Degrees of Freedom -
Continuous System - Lumped mass idealization - Oscillatory motion - Simple Harmonic motion -
Victorian representation of S.H.M. - Free vibrations of single degree of freedom system -
undamped and damped vibrations - critical damping - Logarithmic decrement - Forced vibration
of SDOF systems - Harmonic excitation - Vibration Isolation -Dynamic magnification factor ?
Phase angle.
UNIT II
Introduction to Structural Dynamics : Fundamental objectives of dynamic analysis -Types of
prescribed loading - Methods of discretization - Formulation of equations of motion by different
methods ? Direct equilibration using Newton's law of motion / D'Alembert's Principle, Principle
of virtual work and Hamilton principle.
Single Degree of Freedom Systems : Formulation and solution of the equation of motion - Free
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
vibration response - Response to Harmonic, Periodic, Impulsive and general dynamic loadings -
Duhamel integral.
UNIT III
Multi Degree of Freedom Systems : Selection of the degrees of Freedom - Evaluation of
structural property matrices - Formulation of the MDOF equations of motion -Undamped free
vibrations - Solutions of Eigen value problem for natural frequencies and mode shapes - Analysis
of Dynamic response ? Normal co-ordinates - Uncoupled equations of motion - Orthogonal
properties of normal modes - Mode superposition procedure.
UNIT IV
Practical Vibration Analysis: Introduction - Stodola method - Fundamental mode analysis -
Analysis of second and higher modes - Holzer method - Basic procedure.
Continuous Systems: Introduction - Flexural vibrations of beams - Elementary case ? Derivation
of governing differential equation of motion - Analysis of undamped free vibrations of beams in
flexure - Natural frequencies and mode-shapes of simple beams with different end conditions -
Principles of application to continuous beams.
UNIT V
Introduction to Earthquake Analysis: Deterministic Earthquake Response: Systems on Rigid
Foundations -Types of Earthquake Excitations ? Lumped SDOF Elastic Systems, Translational
Excitations -Generalized coordinate -SDOF Elastic Systems, Translational Excitations, Linear
Static Method ? Analysis for obtaining response of multi storied RC Building.
TEXT BOOKS
1. Structural Dynamics Anil K Chopra, 4edition, Prentice Hall Publishers
2. Structural Dynamics Theory & Computation ? Mario Paz, CBS Publishes and Distributors
3. Elementary Structural Dynamics- V.K. Manika Selvam, Dhanpat Rai Publishers
REFERENCE:
1. Dynamics of Structures by Clough & Penzien 3e, Computers & Structures Inc.
2. Theory of Vibration -William T Thomson, Springer Science.
3. Mechanical Vibrations- S. S. Rao, 5e, Pearson Publications.
4. Structural Dynamics of Earthquake Engineering - Theory and Application using Mathematica
and Matlab- S. Rajasekharan
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - I Semester
3
0
0
3
MATRIX ANALYSIS OF STRUCTURES ( Elective-I )
Course Outcomes: At the end of the course, the student will be able to
CO1
Perform the structural analysis of determinate and indeterminate structures using classical
compatibility methods, such as method of consistent displacements, force and equilibrium
Methods
CO2
Perform structural analysis using the stiffness method.
Solve multiple degree of freedom two and three dimensional problems involving trusses,
CO3
beams, frames and plane stress
CO4
Understand basic finite element analysis
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
3
2
1
1
1
CO2
3
2
1
1
1
CO3
1
3
2
1
1
1
CO4
3
2
1
1
1
1. Slightly 2. Moderately 3. Substantially Detailed
Syllabus:
UNIT: 1
Introduction of matrix methods of analysis ? Static and kinematic indeterminacy ? Degree of
freedom? Structure idealizationstiffness and flexibility methods ? Suitability: Element stiffness
matrix for truss element, beam element and Torsional element Element force displacement
equations.
UNIT: 2
Stiffness method ? Element and global stiffness equation ? coordinate transformation and global
assembly ? structure stiffness matrix equation ? analysis of simple pin jointed trusses ?
continuous beams ? rigid jointed plane frames
UNIT: 3
Stiffness method for Grid elements ? development of stiffness matrix ? coordinate
transformation. Examples of grid problems ? tapered and curved beams
UNIT: 4
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
Additional topics in stiffness methods ? discussion of band width ? semi band width ? static
condensation ? sub structuring ?Loads between jointsSupport displacements inertial and
thermal stressesBeams on elastic foundation by stiffness method.
UNIT: 5
Analysis of plane truss - continuous beams with and without settlement - plane frame including
side sway single storey, single ? bay and gable frame by flexibility method using system
approach
TEXT BOOKS
1. Matrix analysis of structures, Robert E Sennet Prentice HallEnglewood cliffsNew Jercy
2. Advanced structural analysis, P. Dayaratnam Tata McGraw hill publishing company limited.
3. Structural Analysis Matrix Approach - Pandit and Gupta, Mc Graw Hil Education
REFERENCES
1. Indeterminate Structural analysis, C K Wang, Amazon Publications
2. Analysis of Tall buildings by force ? displacement ? Method M. Smolira Mc. Graw Hill.
3. Foundation Analysis and design, J.E. Bowls, 5e, Amazon Publications.
4. Matrix Analysis of Framed Structures 3e-William Weaver, Jr, James M. Gere, Van Nostrand
Reinhold, Newyork
5. Matrix Methods of Structural Analysis Madhu B. Kanchi, Wiley Publications.
6. Indeterminate Structural Analysis by K. U. Muthu, IK International Publishing house
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - I Semester
3
0
0
3
ANALYTICAL & NUMERICAL METHODS FOR
STRUCTURAL ENGINEERING ( Elective-I )
Course Outcomes: At the end of the course, the student will be able to
CO1
Understand the fundamentals of the theory of elasticity
CO2
Implement the principles and techniques of photo elastic measurement
CO3
Obtain the principles and techniques of strain gage measurement
CO4
Adopt the principles and techniques of moir? analysis
CO5
Apply the principles and techniques of holographic interferometer
Apply the principles and techniques of brittle coating analysis Understand the
CO6
fundamentals of the theory of elasticity
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
1
1
1
2
1
1
CO2
1
2
CO3
1
3
CO4
1
3
CO5
3
CO6
1
1
3
1
1
1. Slightly 2. Moderately 3. Substantially Detailed
UNIT-I
Transform Methods- Laplace transform methods for one-dimensional wave equation -
Displacements in a long string - Longitudinal vibration of an elastic bar - Fourier transforms
methods for one-dimensional heat conduction problems in infinite and semi-infinite rod
UNIT-II
Elliptic Equations-Laplace equation - Properties of harmonic functions - Fourier transform
methods for Laplace equation
Calculus Of Variations- Variation and its properties - Euler's equation - Functionals dependent
on first and higher order derivatives - Functionals dependent on functions of several independent
variables - Some applications - Direct methods - Ritz and Kantorovich methods
UNIT-III
Integral Equations- Fredholm and Volterra integral equations - Relation between differential
and integral equations - Green's function -Fredholm equation with separable kernel - Iterative
method for solving equations of second kind
UNIT-IV
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
Finite Difference and their Applications: Introduction- Differentiation formulas by Interpolating
parabolas ? Backward and forward and central differences- Derivation of Differentiation formulas
using Taylor series- Boundary conditions- Beam deflection ? Solution of characteristic value
problems - Richardson's extrapolation - Use of unevenly spaced pivotal points- Integration
formulae by interpolating parabolas- Numerical solution to spatial differential equations ?
Application to Simply Supported Beams, Columns & rectangular Plates.
UNIT-V
Numerical Differentiation: Difference methods based on undetermined coefficients- optimum
choice of step length? Partial differentiation. Numerical Integration: Method based on
interpolation-method based on undetermined coefficient ? Gauss ? Lagrange interpolation
method- Radaua integration method- composite integration method ? Double integration using
Trapezoidal and Simpson's method ? New Marks Method and Application to Beams ?
Calculations of Slopes & Deflections.
TEXT BOOKS
1. Introduction to Partial Differential Equations, Sankara Rao. K, , PHI, New Delhi, 1995
2. Numerical Methods For Scientific and Engineering Computations. M. K. Jain- S. R. K.
Iyengar ? R. K. Jain, New Age International (p) Ltd., Publishers
REFERENCE
1. Differential Equations and Calculus of Variations Elsgolts. L, Mir Publishers, Moscow, 1966
2. Fundamentals of Mathematical Statistics Gupta. S.C, & Kapoor. V.K, Sultan Chand & Sons,
Reprint 1999.
3. Higher Engineering Maths for Engg. And Sciences Venkataraman. M. K, National Publishing
Company, Chennai
4. Numerical Methods for Engineering Problems N. Krishna Raju, K.U. Muthu Macmillan
Publishers
5. Elements of Partial Differential Equations, Sneddon. I.N, Mc Graw Hill, 1986
6. Computer based numerical analysis by Dr. M. Shanta Kumar, Khanna Book publishers New
Delhi
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - I Semester
3
0
0
3
DESIGN OF REINFORCED CONCRETE FOUNDATIONS (Elective-I)
Course Outcomes: At the end of the course, the student will be able to
CO1
Attain the perception of site investigation to select suitable type of foundation based on
soil category
CO2
Capable of ensuring design concepts of shallow foundation
CO3
Can be efficient in selecting suitable type of pile for different soil stratum and in
evaluation of group capacity by formulation
CO4
Design different types of well foundation
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
1
1
CO2
3
1
1
CO3
2
1
1
CO4
2
1
1
1.
Slightly 2. Moderately 3. Substantially
UNIT ? I
Foundation Structures & Design of Centrally Loaded Isolated Footings and Column
Pedestals ? Introduction, Rigid and Flexible Foundations, Loads and their Effects, Design
Requirements, Geotechnical Design, Empirical and Exact Methods of Analysis of foundations,
Design Loads for Foundations, Recommended Approach to Structural Design of Foundations.
Introduction, General Procedure for Design, Design of Square Footing of Uniform Depth (Pad
Footing), Design of sloped Rectangular Footings, Design Procedure, Detailing of Steel, Design of
Rectangular Pad Footings, Design of Plain Concrete Footings, Design of Pedestals, Design
Calculation for Pedestals.
UNIT - II
Wall Footings ? Introduction Simple Plain Concrete Wall Footings, Reinforced Concrete
Continuous Strip Wall Footings, Design of continuous Strip Wall Footings, Design for
Longitudinal Steel, R.C. T Beam Footings in Shrinkable Soils, Foundations of Partition Wall in
Ground Floors, Summary.
Strip Footings Under Several Columns ? Introduction, Design Procedure for Equally loaded
and Equally Spaced Columns, Analysis of Continuous Strip Footing for Unsymmetric Loading,
Analysis of Strip Footing with Unsymmetrical Loads, Detailing of Members.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
UNIT ? III
Raft Foundations ? Introduction, Rigid and Flexible Foundations, common Types of Rafts,
Deflection Requirements of Beams and Slabs in Rafts, General considerations in Design of Rigid
Rafts, Types of Loadings and Choice of Rafts, Record of Contact Pressures Measured Under
Rafts, Modern Theoretical Analysis.
Design of Flat Slab Rafts-Mat Foundations ? Introduction, Components of Flat Slabs,
Preliminary Planning of Flat Slab Rafts, Analysis of Flat Slab by Direct Design Method, Method
of Analysis, Values for Longitudinal Distribution and Transverse, Redistribution, Shear in Flat
Slabs, Bending of Columns in flat Slabs, Limitations of Direct Design Method for Mats, Detailing
of Steel, Design of Edge Beam in Flat Slabs.
Beam and Slab Rafts ? Introduction, Planning of the Raft, Action of the Raft, Approximate
Dimensioning of the Raft, Design of the Beam and Slab Raft under Uniform Pressure, Structural
Analysis for the Main Slab, Design of Secondary and Main Beams, Analysis by Winkler Model,
Detailing of Steel.
UNIT - IV
Combined Piled Raft Foundations (CPRF) ? Introduction, Types and uses of Piled Rafts, ,
Interaction of Pile and Raft, Ultimate Capacity and Settlement of Piles, Estimation of Settlement
of Raft in Soils, Allowable Maximum and Differential Settlement in Buildings, Design of CPRF
System, conceptual Method of Design, Conceptual Method of Analysis, Distribution of Piles in
the Rafts, Theoretical Methods of Analysis.
Circular and Annular Rafts ? Introduction, Positioning of chimney Load on Annular Raft,
Forces Acting on Annular Rafts, Pressures Under Dead Load and Moment, Methods of Analysis,
Conventional Analysis of Annular Rafts, Analysis of Ring Beams Under circular Layout of
Columns, Analysis of Ring Beam Transmitting Column Load to Annular Rafts, Detailing of
Annular Raft Under Columns of a Circular Water Tank.
UNIT ? V
Under-reamed Pile Foundations ? Introduction, Safe Loads on Under-reamed Piles, Design of
Under-reamed Pile Foundation for Load Bearing Walls of Buildings, Design of Grade Beams,
Design of Under-reamed Piles Under Columns of Buildings, Use of Under-reamed Piles for
Expansive Soils.
Design of cantilever and Basement Retaining Walls ? Introduction, Earth Pressure and Rigid
Walls, Calculation of Earth Pressure on Retaining Walls, Design of Rigid Walls, Design of
Ordinary R.C. cantilever Walls, Design of cantilever Walls without Toe, Design of Basement
Walls, Calculation of Earth Pressures in Clays, Design of Free Standing Basement Walls.
TEXT BOOKS
1. Design of Reinforced Concrete Foundations by P. C Varghese, PHI Learning Private
Limited., New Delhi.
2. Swamy saran
REFERENCE
1. Design of Reinforced Concrete Structures by N. Subramaniam- Oxford University.
2. Reinforced Concrete Design by Unnikrishna Pillai and Devdas Menon, Tata Mc Graw Hill
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year- I Semester
3
0
0
3
BRIDGE ENGINEERING
Course Outcomes: At the end of the course, the student will be able to
CO1
Design theories for super structure and substructure of bridges
CO2
Design Culvert, R.C.C T Beam Bridge.
CO3
Understand the behavior of continuous bridges, box girder bridges.
C04
Possess the knowledge to design prestressed concrete bridges.
Design Railway bridges, Plate girder bridges, different types of bearings, abutments,
C05
piers and various types of foundations for Bridges
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
1
2
1
1
CO2
1
2
3
2
2
CO3
1
2
3
2
1
CO4
1
2
2
2
1
CO5
1
2
3
2
2
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
UNIT: I
Concrete Bridges: Introduction-Types of Bridges-Economic span length-Types of loading-Dead
load-live load-Impact Effect-Centrifugal force-wind loads-Lateral loads-Longitudinal forces-
Seismic loads- Frictional resistance of expansion bearings-Secondary Stresses-Temperature
Effect-Erection Forces and effects-Width of roadway and footway-General Design
Requirements.
UNIT: II
Pigeaud's methoddesign of longitudinal girders GuyonMessonet method Hendry Jaegar
method Courbon's theory. (Ref: IRC21), voided slabs,
Super Structure: Slab bridge Wheel load on slab effective width method slabs supported on
two edges cantilever slabs dispersion length Design of interior panel of slab TBeam bridges.
UNIT: III
Box Culverts- Single Cell Box Culvert ? Design Loads, Design Moments, Shears and Thrusts.
Design of Critical sections.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
UNIT-IV
Plate girder bridges Elements of plate girder and their designwebflange intermediate stiffener
vertical stiffeners bearing stiffenerdesign problem
UNIT: 5
Sub structure Abutments Stability analysis of abutments piers loads on piers ? Analysis of
piers Design problem(Ref: IRC13, IRC21, IRC78) Pipe culvert Flow pattern in pipe
culvers culvert alignmentculvert entrance structure Hydraulic design and structural design of
pipe culverts reinforcements in pipes .(Ref: IRC: SP13)
TEXT BOOKS
1. Design of Bridges by N. Krishna Raju CBS Publishers and Distributors
2. Design of Concrete Bridges M.G. Aswini, V.N. Vazirani, M.M Ratwani, Khanna Publishers
3. Essentials of Bridge Engineering Jhonson Victor D, 7e, Oxford IBH Publications
REFERENCES:
1. Bridge Deck Behavior- E.C. Hambly 2e- CRC Press
2. Concrete Bridge Design and Practice- V.K. Raina, Tata McGraw- Hill Publishing Company
Limited
3. Bridge Engineering by S. Ponnuswamy, Mc Grawhill Publications
4. IRC 6- 2016 Standard Specifications and Code of Practice for Road bridges
5. IRC 112-2011 Code of Practice for Concrete Road Bridges
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - I Semester
3
0
0
3
REPAIR AND REHABILITATION OF STRUCTURES
Course Outcomes: At the end of the course, the student will be able to
CO1
Recognize the mechanisms of degradation of concrete structures and to design durable
concrete structures.
CO2
Conduct field monitoring and nondestructive evaluation of concrete structures.
CO3
Design and suggest repair strategies for deteriorated concrete structures including repairing
with composites.
CO4
Understand the methods of strengthening methods for concrete structures
CO5
Assessment of the serviceability and residual life span of concrete structures by Visual
inspection and in situ tests
CO6
Evaluation of causes and mechanism of damage
C07
Evaluation of actual capacity of the concrete structure Maintenance strategies
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
1
1
1
CO2
1
1
1
1
1
CO3
1
1
1
1
1
CO4
1
1
1
1
CO5
1
1
1
1
CO6
1
1
1
1
C07
2
1
1
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
UNIT: 1
Materials for repair and rehabilitation Admixtures types of admixturespurposes of using
admixtures chemical composition Natural admixtures Fibres wraps Glass and Carbon fibre
wraps Steel PlatesNon destructive evaluation: Importance Concrete behavior under corrosion,
disintegrated mechanisms moisture effects and thermal effects ? Visual investigation
Acoustical emission methods Corrosion activity measurement chloride content ? Depth of
carbonation Impact echo methods Ultrasound pulse velocity methods Pull out tests.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
UNIT: 2
Strengthening and stabilization Techniques design considerationsBeam shear capacity
strengthening Shear Transfer strengtheningstress reduction techniques Column strengthening
flexural strengthening Connection stabilization and strengthening, Crack stabilization.
UNIT: 3
Bonded installation techniques Externally bonded FRP Wet layup sheet, bolted plate, near
surface mounted FRP, fundamental debonding mechanismsintermediate crack debonding CDC
debonding plate end debonding strengthening of floor of structures
UNIT: 4
Fibre reinforced concrete Properties of constituent materials Mix proportions, mixing and
casting methodsMechanical properties of fiber reinforced concrete applications of fibre
reinforced concretesLight weight concrete properties of light weight concrete No fines
concrete design of light weight concrete Flyash concreteIntroduction classification of flyash
properties and reaction mechanism of flyash Properties of flyash concrete in fresh state and
hardened state Durability of flyash concretes
UNIT: 5
High performance concretes Introduction Development of high performance concretes
Materials of high performance concretes Properties of high performance concretes Self
Consolidating concrete properties qualifications.
TEXT BOOKS
1. Maintenance Repair Rehabilitation & Minor works of Buildings- P.C. Varghese, PHI
Publications
2. Repair and Rehabilitation of Concrete Structures ? P.I. Modi, C.N. Patel, PHI Publications
3. Rehabilitation of Concrete Structures- B. Vidivelli, Standard Publishers Distributors
4. Concrete Bridge Practice Construction Maintenance & Rehabilitation- V.K. Raina, Shroff
Publishers and Distributors.
REFERENCE:
1. Concrete Technology Theory and Practice- M.S. Shetty, S Chand and Company
2. Concrete Repair and Maintenance illustrated Peter H Emmons
3. Concrete Chemical Theory and Applications- Santa Kumar A.R. , Indian Society for
Construction Engineering and Technology, Madras
4. Handbook on Repair and Rehabilitation of RC Buildings published by CPWD, Delhi
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - I Semester
3
0
0
3
ADVANCED REINFORCED CONCRETE DESIGN (Elective-II)
Course Outcomes: At the end of the course, the student will be able to
CO1
Estimate the deflection of Concrete beams and slabs
CO2
Estimate crack width and its affects
CO3
Design flat slabs, bunkers, silos and chimneys
CO4
Understand the thermal effect on concrete members
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
2
1
2
2
1
CO2
1
3
2
1
CO3
1
3
2
1
CO4
1
2
2
1
1.
Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
UNIT I
Limit Analysis of R C Structures: Rotation of a plastic hinge, Redistribution of moments,
moment rotation characteristics of RC member, I.S. code provisions, loading pattern, Bending
Moment Envelop, Application for Fixed Beams and Continuous Beams. Inelastic Analysis of
Slabs, Moment Redistribution.
UNIT II
Yield line analysis for slabs: Yield line criterion ? Virtual work and equilibrium methods of
analysis ? For square circular, Rectangular, Triangular and Hexagonal with simple and
continuous end conditions.
UNIT III
Ribbed slabs : Analysis of the Slabs for Moment and Shears, Ultimate Moment of Resistance,
Design for shear, Deflection, Arrangement of Reinforcements.
Flat slabs: Direct design method ? Distribution of moments in column strips and middle strip-
moment and shear transfer from slabs to columns ? Shear in Flat slabs-Check for one way and
two way shears-Introduction to Equivalent frame method. Limitations of Direct design method,
Distribution of moments in column strips and middle strip sketch showing reinforcement details.
UNIT IV
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
Design of Reinforced Concrete Deep Beams & Corbels: Steps of Designing Deep Beams,
Design by IS 456. Checking for Local Failures, Detailing of Deep Beams, Analysis of Forces in
a Corbels, Design of Procedure of Corbels, Design of Nibs. Detailing of reinforcement.
UNIT V
Design of Slender Columns ? Slenderness limits, Methods of Design of Slender Columns,
Additional Moment Method, Procedure for Design of Slender Columns. Detailing of
reinforcement.
Eccentrically Loaded columns- development of interaction Diagrams
TEXT BOOKS
1. Advanced Reinforced Concrete Design, by P.C. Varghese Prentice Hall India Limited
2. Design of Reinforced Concrete Structures by N.Subramanian, Oxford University Press.
3. Reinforced Concrete Design, by S. Unnikrishna Pillai & Devdas Menon Tata Mc. Graw-Hill
Publishing Company Ltd. New Delhi 2010.
REFERENCE
1. Limit State Theory and Design of Reinforced Concrete S. R. Karve and V.L Shah. Standard
Publishers
2. Reinforced concrete structural elements ? behavior, Analysis and design by P. Purushotham,
Tata Mc.Graw-Hill, 1994.
3. Design of concrete structures ? Arthus H. Nilson, David Darwin, and Chorles W. Dolar, Tata
Mc. Graw-Hill, 3rd Edition, 2005.
4. Reinforced Concrete design by Kennath Leet, Tata Mc. Graw-Hill International, editions, 2nd
edition, 1991.
5. Design Reinforced Concrete Foundations P.C. Varghese Prentice Hall of INDIA Private Ltd.
6. IS 456-2000 Plain and Reinforced concrete book of Practice.
7. SP 16- Design Aids for Reinforced Concrete to IS 456
8. SP 34 - Hand Book as Concrete Reinforcement and retaining
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - I Semester
2
0
0
3
ADVANCED CONCRETE TECHNOLOGY
Objectives:
To impart knowledge on concrete making materials, concrete mix design for proportioning and
their testing.
Outcomes:
The learner will be able to design concrete mixes of different grades and also use the special
concretes.
UNIT ? I
Concrete Making Materials : Cement ? Bogus Compounds ? Hydration Process ? Types of
Cement ? Aggregates ? Gradation Charts ? Combined Aggregate ? Alakali Silica Reaction ?
Admixtures ? Chemical and Mineral Admixtures. Bureau of Indian Standards (BIS) Provisions.
UNIT ? II
Fresh And Hardened Concrete: Fresh Concrete ? workability tests on Concrete ? Setting Times
of Fresh Concrete ? Segregation and bleeding.
Hardened Concrete : Abrams Law, Gel space ratios, Maturity concept ? Stress strain Behaviour
? Creep and Shrinkage ? Durability Tests on Concrete ? Non Destructive Testing of Concrete.
BIS Provisions.
UNIT ? III
High Strength Concrete ? Microstructure ? Manufacturing and Properties ? Design of HSC Using
Erintroy Shaklok method ? Ultra High Strength Concrete.
High Performance Concrete ? Requirements and Properties of High Performance Concrete ?
Design Considerations. BIS Provisions.
UNIT ? IV
Special Concretes: Self Compacting concrete, Polymer Concrete, Fibre Reinforced Concrete ?
Reactive Powder Concrete ? Requirements and Guidelines ? Advantages and Applications.
Concrete Mix Design: Quality Control ? Quality Assurance ? Quality Audit - Mix Design
Method ? BIS Method ? IS.10262 ? 2019 Concrete Mix proportion guidelines. DOE Method?
Light Weight Concrete, Self Compacting Concrete.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
UNIT ? V
Form work ? materials ? structural requests ? form work systems ? connections ? specifications ?
design of form work ? shores ? removal for forms - shores ? reshoring ? failure of form work.
TEXT BOOKS
1. Properties of Concrete by A. M. Neville, ELBS publications Oct 1996.
2. Concrete Technology by A. R. Santhakumar, 2nd Edition, Oxford University Press.
3. Concrete Technology by M.S. Shetty, S.Chand & Co 2009.
REFERENCES
1. Concrete: Micro Structure, Properties and Materials by P. K. Mehta and P. J. Monteiro,. Mc.
Graw-Hill Publishing Company Ltd. New Delhi
2. Design of Concrete Mixes by N. Krishna Raju, CBS Publications, 2000.
3. Special Structural concretes by Rafat Siddique, Galgotia Publications 2000.
4. IS 10262-2009
5. Relevant BIS Codes
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - I Semester
0
0
4
2
ADVANCED CONCRETE TECHNOLOGY LABORATORY
Course Outcomes: At the end of the course, the student will be able to able to
CO1 Conduct various laboratory tests on Cement, Aggregates
C02 Know strain measurement
C03 Nondestructive testing
C04 Chemical analysis on concrete and Aggregate and Sand
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
3
1
1
3
1
1
3
1
1
3
1
1
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
List of Experiments:
1. Study on Water / Cement Ratios Vs Workability of different concretes
2. Study on Water / Cement Ratios Vs Strength of different concretes
3. Study of variation of Coarse Aggregate to Fine Aggregates on Workability
4. Study of variation of Coarse Aggregate to Fine Aggregates on Strength
5. Strain measurement Electrical resistance strain gauges
6. Non destructive testing Impact Hammer test, UPV test
7. Qualifications tests on Self compaction concrete L Box , J Box , U box and Slump tests
NOTE: A minimum of five experiments from the above set have to be conducted
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - I Semester
0
0
4
2
ADVANCED STRUCTURAL ENGINEERING LABORATORY
Course Outcomes: At the end of the course, the student will be able to
CO1 conduct various laboratory tests on Cement, Aggregates
C02 Know strain measurement
C03 Nondestructive testing
C04 Chemical analysis on concrete and Aggregate and Sand
A
Mapping of Course Outcomes with Program Outcomes:
PO
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
7
CO1
3
1
1
3
1
1
3
1
1
3
1
1
2. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
List of Experiments:
1. Study on Deflection and Cracks on a Under Reinforced Over Reinforced and Balanced
Sections
2. Study on Performance of RCC Beams designed for Bending and failing in Shear
3. Study on Performance of RCC Beams designed for Shear and failing in Bending
4. Study on Performance of RCC One way slabs
5. Study on Performance of RCC Two way slabs with simply supported edge conditions
6. Study on Performance of RCC Two way slabs with fixed edge conditions
7. Calculation of Young's Modulus of Elasticity of Concrete
8. Extraction and Study of Concrete Core samples from pavements
NOTE: A minimum of five experiments from the above set have to be conducted as
demonstration to entire class.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - II Semester
3
0
0
3
FINITE ELEMENT METHODS IN STRUCTURAL ENGINEERING
Course Outcomes: At the end of the course, the student will be able to
CO1
Develop finite element formulations of 1 degree of freedom problems and solve them
CO2
Understand any Finite Element software to perform stress, thermal and modal analysis
CO3
Compute the stiffness matrices of different elements and system
CO4
Interpret displacements, strains and stress resultants
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
1
2
3
2
1
CO2
1
2
3
2
1
CO3
1
2
3
2
1
CO4
1
2
3
2
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
UNIT: 1
Introduction: Review of stiffness method Principle of Stationary potential energyPotential
energy of an elastic body RayleighRitz method of functional approximation variational
approaches weighted residual methods
UNIT: 2
Finite Element formulation of truss element: Stiffness matrix properties of stiffness matrix ?
Selection of approximate displacement functions solution of a plane truss transformation matrix
and stiffness matrix for a 3D truss Inclined and skewed supports Galerkin's method for 1D
truss ? Computation of stress in a truss element.
UNIT: 3
Finite element formulation of Beam elements: Beam stiffness assemblage of beam stiffness
matrix Examples of beam analysis for concentrated and distributed loading Galerkin's method
2D Arbitrarily oriented beam element ? inclined and skewed supports ?rigid plane frame
examples
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
UNIT: 4
Finite element formulation for plane stress, plane strain and axisymmetric problems Derivation
of CST and LST stiffness matrix and equationstreatment of body and surface forcesFinite
Element solution for plane stress and axisymmetric problems comparison of CST and LST
elements ?convergence of solution interpretation of stresses.
UNIT: 5
Isoparametric Formulation: Isoparametric bar element plane bilinear Isoparametric element ?
quadratic plane element shape functions, evaluation of stiffness matrix, consistent nodal load
vector Gauss quadrature appropriate order of quadrature ? element and mesh instabilities ?
spurious zero energy modes, stress computation patch test.
TEXT BOOKS
1. A first course in the Finite Element Method ? Daryl L. Logan, Thomson Publications.
2. Concepts and applications of Finite Element Analysis ? Robert D. Cook, Michael E Plesha,
John Wiley & Sons Publications
3. Fundamental Finite Element Analysis and Applications: with Mathematica and Matlab
Computations, Bhatti, M.A. Wiley Publications
REFERENCES:
1. Introduction to Finite Elements in Engineering Tirupati R. Chandrupatla, Ashok D.
Belgunda, PHI publications.
2. Finite Element Methods (For Structural Engineers) Wail N Rifaie, Ashok K Govil, New Age
International (P) Limited
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - II Semester
3
0
0
3
THEORY OF PLATES AND SHELLS
Course Outcomes: At the end of the course, the student will be able to
CO1
Have a knowledge about various plate theories due to bending
CO2
Gain the knowledge of Navier's solution, Levy's solution and solve for the rectangular and square
plates
CO3
Analyze circular plates with various boundary conditions.
CO4
Focus on the finite difference method of solving plate problems.
CO5
Ability to realize the potential energy principle and find the solution of rectangular plates for
various loadings
CO6
Understand the behaviour of folded plates and shells.
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
CO1
2
1
1
CO2
2
2
CO3
3
CO4
3
1
CO5
1
1
3
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
UNIT: 1
Derivation of governing differential equation for plate? in plane bending and transverse bending
effects Rectangular plates: Plates under various loading conditions like concentrated, uniformly
distributed load and hydrostatic pressure. Navier and Levy's type of solutions for various
boundary condition.
UNIT: 2
Circular plates: Symmetrically loaded, circular plates under various loading conditions, Annular
plates.
UNIT: 3
Introduction to Shells Single and double curvature Equations of Equilibrium of Shells:
Derivation of stress resultants, Principles of membrane theory and bending theory
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
UNIT: 4
Cylindrical Shells: Derivation of the governing DKJ equation for bending theory, details of
Schorer's theory. Application to the analysis and design of short and long shells. Use of ASCE
Manual coefficients for the design.
UNIT: 5
Beam theory of cylindrical shells: Beam and arch action. Design of diaphragms Geometry
analysis and design of elliptic Paraboloid, Conoidal and Hyperbolic Paraboloid shapes by
membrane theory.
TEXT BOOKS
1. Theory of Plates and Shells 2e ?S. Timoshenko and S. Woinowsky Krieger, McGrawHill
book company, INC, New York.
2. Reinforced Concrete Shells and Folded Plates by P.C. Varghese, Prentice Hall India
Publications
3. Analysis of Thin Concrete Shells by K. Chandrasekhara, New Age International (P) Ltd
REFERENCES:
1. Theory and Analysis of Elastic Plates and Shells by J. N. Reddy, CRS Press
2. A Text Book of Shell Analysis ? Bairagi, K, Khanna Publisher, New Delhi.
3. Design and Construction of Concrete Shell Roofs ? Ramaswamy, G.S, Mc Graw Hill,
New York
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - II Semester
3
0
0
3
Elective III STABILITY OF STRUCTURES
Course Outcomes: At the end of the course, the student will be able to
CO1
Analyze different types of structural instabilities
CO2
Execute and work out the inelastic buckling using various methodologies.
CO3
Examine the behaviour of beam columns and frames with and without side sway using
classical and stiffness methods
CO4
To be well versed in the lateral buckling, torsional buckling, Flexural torsional buckling
of various beams and noncircular sections.
Mapping of Course Outcomes with Program Outcomes:
PO
Course Out Comes
1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
3
2
1
2
CO2
3
2
1
2
CO3
3
2
1
2
CO4
3
2
1
2
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
UNIT: 1
Beam columns: Differential equation for beam columns ? Beams column with concentrated loads
? continuous lateral load ? couples ? Beam column with built in ends ? continuous beams with
axial load ? application of Trigonometric series ? Determination of allowable stresses
UNIT: 2
Elastic buckling of bars : Elastic buckling of straight columns ? Effect of shear stress on buckling
? Eccentrically and laterally loaded columns ?Sway & Non Sway mode Energy methods ?
Buckling of a bar on elastic foundation ? Buckling of bar with intermediate compressive forces
and distributed axial loads ? Buckling of bars with change in cross section ? Effect of shear force
on critical load ? Built up columns ? Effect of Initial curvature on bars ? Buckling of frames ?
Sway & Non Sway mode
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
UNIT: 3
Inelastic buckling: Buckling of straight bars ? Double modulus theory Tangent modulus theory.
Experiments and design formulae: Experiments on columns ? Critical stress diagram ? Empirical
formulae of design ? various end conditions ? Design of columns based on buckling.
Mathematical Treatment of stability problems: Buckling problem orthogonality relation ? Ritz
method ?Stiffness method and formulation of Geometric stiffness matrix Applications to simple
frames
UNIT: 4
Torsional Buckling: Pure torsion of thin walled bars of open cross section ? Non uniform torsion
of thin walled bars of open cross section Torsional buckling ? Buckling of Torsion and Flexure
UNIT: 5
Lateral Buckling of simply supported Beams: Beams of rectangular cross section subjected for
pure bending, Buckling of I Section subjected to pure bending
TEXT BOOKS
1. Theory of Stability of Structures by Alexander ChaJes.
2. Theory of Elastic Stability by S. P. Timshenko & J.M. GereMc Graw Hill Publications
3. Theory of Elastic Stability by Manikaselvam
REFERENCES:
1. Fundamentals of Structural Stability by George J Smith & Dewey H. Hodges, Elsevier
Publications
2. Elastic Stability of Structural Elements, N.G.R. Iyengar Macmillan Publications
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - II Semester
3
0
0
3
Elective III ?ADVANCED STEEL DESIGN
Objectives:
To impart knowledge on behavior and design of various connections, industrial and steel girders.
Outcomes: The learner will be able to design different steel structures.
UNIT-I
Simple Connections ? Riveted, Bolted Pinned And Welded Connections: Riveted
Connections ? Bolted Connections ?Load Transfer Mechanism ? Failure of Bolted Joints ?
Specifications for Bolted Joints ? Bearing ? Type Connections ? Tensile Strength of Plate ?
Strength and Efficiency of the Joint ? Combined Shear and Tension ? Slip-Critical connections ?
Prying Action ? Combined Shear and Tension for Slip-Critical Connections. Design of Groove
Welds - Design of Fillet Welds ? Design of Intermittent Fillet Welds ? Failure of Welds.
UNIT-II
Plastic Analysis: Introduction ? Plastic Theory ? Plastic neutral Axis plastic moment, Elastic &
Plastic Section moduli - shape factors plastic Hinge ? Fundamental condition conditions in plastic
analysis, methods of plastic analysis ? collapse load ? simply supported, propped cantilever beam,
fixed beams continuous beams, portal frame single bay single storey portal frame at different
level subjected to vertical and horizontal loads.
UNIT-III
Eccentric And Moment Connections: Introduction ? Beams ? Column Connections ?
Connections Subjected to Eccentric Shear ? Bolted Framed Connections ?Bolted Seat
Connections ? Bolted Bracket Connections. Bolted Moment Connections ? Welded Framed
Connections- Welded Bracket Connections ? Moment Resistant Connections.
UNIT-IV
Analysis And Design Of Industrial Buildings: Dead loads, live loads and wind loads on roofs.
Design wind speed and pressure, wind pressure on roofs; wind effect on cladding and louvers;
Design of angular roof truss, tubular truss, truss for a railway platform. Design of purlins for
roofs, design of built up purlins, design of knee braced trusses and stanchions. Design of bracings.
UNIT-V
Design Of Steel Truss Girder Bridges: Types of truss bridges, component parts of a truss
bridge, economic Proportions of trusses, self weight of truss girders, design of bridge
Compression members, tension members; wind load on truss girder Bridges; wind effect on top
lateral bracing; bottom lateral bracing; portal Bracing; sway bracing Design of Lacing.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
TEXT BOOKS
1. Limit State Design of Steel Structures S.K. Duggal Mc Graw Hill Education Private Ltd. New
Delhi.
2. Design of steel structures by N. Subramanian, Oxford University Press
3. Design Steel Structures Volume-II, Ramachandra & Vivendra Gehlot, Scientific Publishes
Journals Department..
REFERENCE
1. Design of Steel Structures. P. Dayaratnam, S. Chand, Edition 2011-12.
2. Design of Steel Structures Galyord & Gaylord, Tata Mc Graw Hill, Education, Edition 2012.
3. Indian Standard Code ? IS ? 800-2007.
4. Indian Standard Code ? IS ? 875 ? Part III - 2015
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - II Semester
3
0
0
3
Elective III ? ANALYSIS OF OFFSHORE STRUCTURES
Course Outcomes: At the end of the course, the student will be able to
CO1
Perform concept development of offshore structure
CO2
Find the wave force on vertical cylinder
CO3
Perform static and dynamic analysis of fixed offshore structure
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
1
1
1
CO2
2
1
2
1
CO3
3
3
2
1
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
UNIT: 1
Introduction to different types of offshore structures, Concept of fixed, compliant and floating
structures, Law of floatation, fluid pressure and centre of pressure, estimation of centre of
gravity, hydrostatic particulars, stability criteria of floating bodies, and motions of a floating
body.
UNIT: 2
Conservation mass and momentum, Euler equation, Bernoullis Equation, Potential flow,
Classification of waves, small amplitude or Linear Airy's theory, dispersion relationship, water
particle kinematics, wave energy.
UNIT: 3
Wave force estimation Wave force on small bodiesMorison equation, Estimation of wave force
on a vertical cylinder, Force due to current, Effect of marine growth on vertical cylinders.
UNIT: 4
Wave force on large bodiesFroudekrylov theory, Diffraction theory.
UNIT: 5
Static and dynamic analysis of fixed offshore structures.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
TEXT BOOKS
1. Graff, W. J., Introduction to Offshore Structures, Gulf Publ. Co.1981.
2. Dawson, T. H., Offshore Structural Engineering, Prentice Hall, 1983.
REFERENCES
1. Hand book of offshore Engineering, Vol I, Subrata Chakrabarti, Offshore Structure Analysis,
Inc., Plainfield, Illinois, USA.
2. API RP 2A., Planning, Designing and Constructing Fixed Offshore Platforms, API.
3. McClelland, B & Reifel, M. D., Planning & Design of fixed Offshore Platforms, Van
Nostrand, 1986.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - II Semester
3
0
0
3
Elective 4 EARTHQUAKE RESISTANT DESIGN OF BUILDINGS
Course Outcomes: At the end of the course, the student will be able to
CO1
To learn the fundamentals of seismology and basic earthquake mechanisms, tectonics types of
ground motion, and propagation of ground motion.
CO2
Understand qualitative and quantitative representations of earthquake magnitude
CO3
Determine the natural frequency of a single degree of freedom dynamic system for given mass,
stiffness and damping properties.
CO4
Determine the maximum dynamic response of an elastic vibrating structure to a given forcing
function
CO5
Learn the fundamentals of building code based structural design
CO6
Determine the static design base shear based on the type of structural system, irregularity,
location and occupancy.
CO7
Distribute the static base shear to the structure based on vertical distribution of mass horizontal
distribution of mass, and centers of rigidity.
CO8
Recognize special conditions such as irregular buildings, building separation, Pdelta
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
2
2
1
CO2
2
2
1
CO3
2
2
1
CO4
2
2
1
CO5
1
2
3
2
1
CO6
1
2
3
2
1
C07
1
2
3
2
1
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
UNIT: I
Engineering seismology ? rebound theory ? plate tectonics ? seismic waves earthquake size and
various scales ? local site effects ? Indian seismicity ? seismic zones of India ? theory of
vibrations ? near ground and far ground rotation and their effects
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
UNIT: II
Seismic design concepts ? EQ load on simple building ? load path ? floor and roof diaphragms ?
seismic resistant building architecture ? plan configuration ? vertical configuration ? pounding
effects ? mass and stiffness irregularities ? torsion in structural system Provision of seismic code
(IS 1893 & 13920) ? Building system ? frames ? shear wall ? braced frames ? layout design of
Moment Resisting Frames(MRF) ? ductility of MRF ? Infill wall ? Non structural elements
UNIT: III
Calculation of EQ load ? 3D modeling of building systems and analysis (theory only) Design and
ductile detailing of Beams and columns of frames Concept of strong column weak beams, Design
and ductile detailing of shear walls
UNIT: IV
Cyclic loading behavior of RC, steel and pre stressed concrete elements modern concepts
Base isolation ? Adaptive systems ? case studies
UNIT: V
Retrofitting and restoration of buildings subjected to damage due to earthquakes effects of
earthquakes ? factors related to building damages due to earthquake methods of seismic
retrofitting restoration of buildings
TEXT BOOKS
1. Earthquake Resistant Design of Structures Pankaj Agarwal and Manish ShriKhande, Prentice
? Hall of India, 2007, New Delhi.
2. Earthquake Resistant Design of Structures- S.K. Duggal, Oxford Publications
REFERENCE
1. Seismic design of reinforced concrete and masonry buildings by Paulay and Priestley
2. Earthquake Resistant Design and Risk Reduction- David Dowrick
3. IS 4326 -1998: Earthquake Resistant Design and Construction of Buildings
4. IS 1893 (Part 1 to 5)- 2016: General Provisions and Building
5. IS 4928?1993: Code of practice for Earthquake Resistant Design and Construction of
Buildings
6. IS 13920-2016: Code of Practice for Ductile Detailing of Reinforced Concrete Structures
subjected to Seismic Forces
7. IS 13935-1993: Guidelines for Repair and Seismic Strengthening of Building
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - II Semester
3
0
0
3
Elective IV: PRECAST AND PREFABRICATED STRUCTURES
Course Outcomes: At the end of the course, the student will be able to:
CO1 Analyze the prefabricated load carrying members
CO2 Analyze the production technology of prefabrication
CO3 Design and detailing of precast UNIT for factories
CO4 Design single storied simple frames
Mapping of course outcomes with program outcomes:
Course Outcomes
PO1
PO2
PO3
PO4
PO5
PO6
CO1
2
1
2
3
2
1
CO2
2
1
1
3
2
1
CO3
2
1
2
3
3
1
CO4
2
1
1
3
3
1
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
UNIT -I
Need for prefabrication ? General Principles of Prefabrication - Comparison with monolithic
construction, types of prefabrication, site and plant prefabrication, economy of prefabrication,
modular coordination, standardization ? Materials ? Modular coordination ? Systems ?
Production ? Transportation ? Erection.
UNIT -II
Prefabricated Load Carrying Members-Planning for components of prefabricated structures,
disuniting of structures, design of simple rectangular beams and I-beams, handling and erection
stresses, elimination of erection stresses, beams, columns, symmetric frames. Behaviour of
structural components ? Large panel constructions ? Construction of roof and floor slabs ? Wall
panels ? Columns ? Shear walls.
UNIT -III
Joints - Joints for different structural connections, effective sealing of joints for water proofing,
provisions for non-structural fastenings, expansion joints in precast construction.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
UNIT -IV
Production Technology - Choice of production setup, manufacturing methods, stationary and
mobile production, planning of production setup, storage of precast elements, dimensional
tolerances, acceleration of concrete hardening. Hoisting Technology - Equipment for hoisting and
erection, techniques for erection of different types of members like beams, slabs, wall panels and
columns, vacuum lifting pads.
UNIT -V
Applications - Designing and detailing of precast UNIT for factory structures, purlins, principal
rafters, roof trusses, lattice girders, gable frames, singe span single storied simple frames, single
storied buildings, slabs, beams and columns. Progressive collapse ? Code provisions ? Equivalent
design loads for considering abnormal effects such as earthquakes, cyclones, etc., - Importance of
avoidance of progressive collapse.
TEXT BOOKS
1. Precast Concrete Structures- Kim S Elliott, CRC Press
2. CBRI, Building materials and components, India, 1990
3. Gerostiza C.Z., Hendrikson C. and Rehat D.R., Knowledge based process planning for
construction and manufacturing, Academic Press Inc., 1994
4. Koncz T., Manual of precast concrete construction, Vols. I, II and III, Bauverlag, GMBH,
1971.
REFERENCES
1. Structural design manual, Precast concrete connection details, Society for the studies in the
use of precast concrete, Netherland Betor Verlag, 1978.
2. Mokk. L, (1964), Prefabricated Concrete for Industrial and Public Structures, Publishing
House of the Hungarian Academy of Sciences, Budapest.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - II Semester
3
0
0
3
Elective IV EARTH RETAINING STRUCTURES
Course Outcomes: At the end of the course, the student will be able to
CO1
Quantify the lateral earth pressures associated with different earth systems
CO2
Evaluate the mechanical properties of geosynthetics used for soil reinforcement
CO3
Identify the merits and demerits of different earth retaining systems.
Select the most technically appropriate type of retaining wall for the application from a thorough
CO4
knowledge of available systems
CO5
Design of retaining structures using appropriate design methods, factors of safety, earth
pressure diagrams and field verification methods
CO6
Aware of current guidelines regarding the design of earth retaining structures.
CO7
Design retaining structures considering both external and internal stability aspects
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
1
1
1
1
CO2
1
1
1
1
CO3
1
1
1
CO4
1
1
1
1
CO5
2
3
2
2
CO6
2
2
2
2
C07
1
3
2
2
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
UNIT: I
Earth pressures ? Different types and their coefficients Classical Theories of Earth pressure ?
Rankine's and Coulomb's Theories for Active and Passive earth pressure Computation of
Lateral Earth Pressure in Homogeneous and Layered soils Graphical solutions for Coulomb's
Theory in active and passive conditions.
UNIT: II
Retaining walls ? different types Type of Failures of Retaining Walls ? Stability requirements
? Drainage behind Retaining walls ? Provision of Joints ? Relief Shells.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
UNIT: III
Sheet Pile Structures ? Types of Sheet piles ? Cantilever sheet piles in sands and clays ?
Anchored sheet piles ? Free earth and Fixed earth support methods ? Rowe's moment reduction
method ? Location of anchors and Design of Anchorage system.
UNIT: IV
Soil reinforcement ? Reinforced earth Different components ? their functions ? Design
principles of reinforced earth retaining walls.
UNIT: V
Braced cuts and Cofferdams: Lateral Pressure in Braced cuts ? Design of Various Components
of a Braced cut ? Stability of Braced cuts ? Bottom Heave in cuts. ? types of cofferdam,
suitability, merits and demerits ? Design of single ? wall cofferdams and their stability aspects ?
TVA method and Cummins' methods.
TEXT BOOKS
1. Principles of Foundation Engineering 7e by Braja Das, Cengage Learning
2. Foundation analysis and design by Bowles, J.E. ? McGraw Hill
REFERENCES
1. Soil Mechanics in Engineering Practice ? Terzaghi, K and Ralph, B. Peck 2e. ? John Wiley &
Sons.,
2. Analysis and Design of Foundations and Retaining Structures, Samsher Prakash, Gopal
Ranjan and Swami Saran, Saritha Prakashan, New Delhi
3. NPTEL course materials on Geo-synthetics and Earth Retaining Structures
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - II Semester
0
0
4
2
Laboratory 3 ? COMPUTER AIDED DESIGN LABORATORY
Course Outcomes: At the end of the course, the student will be able to
CO1 Develop Computer Programs for Analysis and Design of various Structural Elements
CO2 Use different Structural Engineering software's to solve various civil Engineering programs
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
1
3
3
3
1
3
3
CO2
1
3
2
3
1
3
3
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
Analysis and Design using STADD, STADD FOUNDATION, ETABS, ANSYS
1. Programming for beams subject to different loading
2. Analysis and Design of reinforced concrete multistoried building
3. Analysis of plane and space truss
4. Analysis of plane and space frame
5. Determination of mode shapes and frequencies of tall buildings using lumped mass (stick
model) approximation
NOTE: A minimum of Four from the above set have to be conducted.
REFERENCE:
Computer aided design laboratory (Civil Engineering) by Shesha Prakash and Suresh.S
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - II Semester
0
0
4
2
Laboratory 4 ? STRUCTURAL DESIGN LABORATORY
Course Outcomes: At the end of the course, the student will be able to
CO1
Develop Computer Programs for Analysis and Design of various Structural Elements
CO2
Use different Structural Engineering software's to solve various civil Engineering programs
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
1
3
3
3
1
3
3
CO2
1
3
2
3
1
3
3
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
Analysis and Design using STADD, STADD FOUNDATION, ETABS, ANSYS
1. Wind analysis on tall structure
2. Analysis of pre stressed concrete bridge girder
3. Analysis of Cylindrical shell
4. Analysis of Bridge Pier and Abutment
5. Dynamic Analysis of Multistory structure
NOTE: A minimum of Four from the above set have to be conducted.
REFERENCE:
Computer aided design laboratory (Civil Engineering) by Shesha Prakash and Suresh.S
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
I Year - II Semester
0
0
4
2
SEMINAR
Course Outcomes: At the end of the course, the student will be able to
CO1
Collect research material on some topic and to summaries it report and give to present the same
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
--
--
1
1
2
2
2
1. Slightly 2. Moderately 3. Substantially
DESIGN PROJECT
Course Outcomes: At the end of the course, the student will be able to
CO1
Analyse, design and prepare a report on Special Design topic related to Structural
Engineering
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
1
1
2
3
1
3
1. Slightly 2. Moderately 3. Substantially
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
DISSERTATION / THESIS
Course Outcomes: At the end of the course, the student will be able to
CO1 Identifying the topic after thorough review of literature on chosen topic and Can
able to do the Project either Experimental Work or analytical Work
Mapping of Course Outcomes with Program Outcomes:
PO
Course Out Comes PO1
PO2
PO3
PO4
PO5
PO6
7
CO1
1
2
2
3
3
3
1. Slightly 2. Moderately 3. Substantially
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
II Year - I Semester
3
0
0
3
Program Elective 5 DESIGN OF PRESTRESSED CONCRETE STRUCTURES
Course Outcomes: At the end of the course, the student will be able to
CO1
Explain the principle, types and systems of prestressing and analyze the deflections.
CO2
Determine the flexural strength and design the flexural members, end blocks.
CO3
Analyze the statically indeterminate structures and design the continuous beam.
C04
Design the tension and compression members and apply it for design of piles.
C05
Analyze the stress, deflections, flexural and shear strength and apply it for the design of bridges.
C06
Analyze the Composite construction of Prestressed and insitu concrete.
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
1
1
2
1
2
1
CO2
1
1
2
2
2
1
CO3
1
2
2
2
2
1
CO4
1
2
3
2
1
CO5
1
2
2
3
2
1
CO6
1
2
2
2
2
1
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus
UNIT I:
Introduction ? Prestressing Systems ? Pretensioning Systems ? Postensioning Systems ? High
Strength Steel and Concrete - Analysis of Prestress - Resultant Stresses at a Section ? Pressure
Line or Thrust Line ? Concept of Load Balancing - Losses of Prestress ? Loss Due to Elastic
Deformation of Concrete ? Shrinkage of Concrete ? Creep ? Relaxation of Stress in Steel ?
Friction ? Anchorage Slip.
UNIT II:
DEFLECTIONS OF PRESTRESSED CONCRETE MEMBERS : Importance of Control of
Deflections ? Factors Influencing Deflection ? Short-term Deflections of Uncracked Members ?
Prediction of Long-time Deflections ? Deflections of Cracked Members ? Requirements of
IS 1343-2012.
Ultimate Flexural Strength of Beams: Introduction, Flexural theory using first principles ?
Simplified Methods ? Ultimate Moment of Resistance of untensioned Steel.
UNIT III:
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
COMPOSITE CONSTRUCTIONS: Introduction, Advantages, Types of Composite
Construction, Analysis of Composite beams- Differential shrinkage- Ultimate Flexural and shear
strength of composite sections- Deflection of Composite Beams. Design of Composite sections.
UNIT IV:
PRESTRESSED CONCRETE SLABS: Types Of Prestressed Concrete Floor Slabs- Design of
Prestressed Concrete One Way and Two Way Slabs.
Prestressed Concrete Pipes and Poles : Circular prestressing- Types of Prestressed Concrete
Pipes- Design of Prestressed Concrete Pipes - Prestressed Concrete Poles.
UNIT V:
CONTINUOUS BEAMS: Advantage of Continuous Members ? Effect of Prestressing
Inderterminate Structures ? Methods of Achieving Continuity ? Methods of Analysis of
Secondary Moments ? Concordant Cable Profile ? Guyon's Theorem. Redistribution of moments
in a continuous beam.
Anchorage Zone Stresses in Beams : Introduction, Stress distribution in End Block ?
Anchorage zone stresses ?Magnel's method- Guyon's Method - Anchorage zone Reinforcement.
TEXT BOOKS
1. Prestressed Concrete, 6e by N. Krishna Raju, Mc Graw Hill Publishers
2. Prestressed Concrete by K. U.Muthu, PHI Learning Pvt Limited
REFERENCES:
1. Prestressed Concrete Analysis and Design, Antone E. Naaman 2e, Techno Press 3000
2. Design of Prestressed Concrete T. Y. Lin, Ned H. Burns 3e, Wiley Publications
3. Design of prestressed Concrete by E.G. Nawy
4. Prestressed Concrete by N. Rajagopalan, Narosa Publishing
5. IS1343 2012 Prestressed concrete Code of Practice
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
II Year - I Semester
3
0
0
3
Program Elective 5 STRUCTURAL HEALTH MONITORING
Course Outcomes: At the end of the course, the student will be able to
Diagnose the distress in the structure by understanding the causes and
CO1
factors
CO2
Assess the health of structure using static field methods.
CO3
Assess the health of structure using dynamic field tests
C04
Carryout repairs and rehabilitation measures of the structure
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
1
1
2
1
2
1
CO2
1
1
2
2
2
1
CO3
1
2
2
2
2
1
CO4
1
2
3
2
1
1. Slightly 2. Moderately 3. Substantially
UNIT-I
Structural Health: Factors affecting Health of Structures, Causes of Distress, Regular
Maintenance
UNIT-II
Structural Health Monitoring: Concept, Various Measures, Structural Safety in Alteration.
Structural Audit: Assessment of Health of Structure, Collapse and Investigation, Investigation
Management, SHM Procedures
UNIT ? III
Static Field Testing: Types of Static Tests, Simulation and Loading Methods, sensor systems
and hardware requirements, Static Response Measurement.
UNIT-IV
Dynamic Field Testing: Types of Dynamic Field Test, Stress History Data, Dynamic Response
Methods, Hardware for Remote Data Acquisition Systems, Remote Structural Health Monitoring.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
UNIT-V
Introduction to Repairs and Rehabilitations of Structures: Case Studies (Site Visits), Piezo?
electric materials and other smart materials, electro?mechanical impedance (EMI) technique,
adaptations of EMI technique.
TEXT BOOKS
1. Structural Health Monitoring, Daniel Balageas, Claus Peter Fritzen, Alfredo
G?emes, John Wiley and Sons, 2006.
2.
He
alth Monitoring of Structural Materials and Components Methods withApplications,
Douglas E Adams, John Wiley and Sons, 2007.
REFERENCES
1. Structural Health Monitoring and Intelligent Infrastructure, Vol1, J. P. Ou, H. Li and Z.
D. Duan, Taylor and Francis Group, London, UK, 2006.
2. Structural Health Monitoring with Wafer Active Sensors, Victor Giurglutiu, Academic
Press Inc, 2007.
.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
II Year - I Semester
3
0
0
3
Program Elective 5 ? INDUSTRIAL STRUCTURES
Course Outcomes: At the end of the course, the student will be able to
CO1
Plan the functional requirements of structural systems for various industries.
CO2
Get an idea about the materials used and design of industrial structural elements.
CO3
Realize the basic concepts and design of power plant structures.
CO4
Design power transmission structures.
C05
Possess the ability to understand the design concepts of Chimneys, bunkers and silos
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
1
1
CO2
1
1
CO3
1
1
CO4
3
3
CO5
2
3
3
2
1. Slightly 2. Moderately 3. Substantially
Detailed Syllabus:
UNIT: I
Planning and functional requirements classification of industries and industrial structures
planning for layout requirements regarding lighting ventilation and fire safety protection
against noise and vibrations
UNIT: II
Industrial buildings roofs for industrial buildings (Steel) design of gantry girder design of
corbels and nibs machine foundations
UNIT: III
Design of Pre Engineered Buildings
UNIT: IV
Power plant structures Bunkers and silos chimney and cooling towersNuclear containment
structures
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
UNIT: V
Power transmission structures transmission line towers tower foundations testing towers
TEXT BOOKS
1. Handbook on Machine Foundations by P. Srinivasulu and C. V. Vaidyanathan, Structural
Engineering Research Center
2. Tall Chimneys Design and Construction by S. N. Manohar Tata Mc Grawhill Publishing
Company
REFERENCES:
1. Transmission Line Structures by S. S. Murthy and A. R. Santakumar McGraw Hill
2. SP 32: 1986, Handbook on functional requirements of Industrial buildings
3. Design of steel structures by N. Subramanian
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
II Year - I Semester
3
0
0
3
Open Elective: a). OPERATIONS RESEARCH
(Common to M. Tech - Structural Engineering & Structural Design, Soil Mechanics & Foundation Engineering,
Highway Engineering, and Transportation Engineering)
OUTCOMES:
At the end of the course, the student will be able to
Formulate a linear programming problem for given problem and solve this problem by
using Simplex techniques
apply the dynamic programming to solve problems of discreet and continuous variables
apply the concept of non-linear programming for solving the problems involving non-
linear constraints
carry out sensitivity analysis
model the real world problem and simulate it
UNIT-I
Optimization Techniques, Model Formulation, models, General L.R Formulation, Simplex
Techniques, Sensitivity Analysis, Inventory Control Models.
UNIT-II
Formulation of a LPP - Graphical solution revised simplex method - duality theory - dual simplex
method - sensitivity analysis - parametric programming.
UNIT-III
Nonlinear programming problem - Kuhn-Tucker conditions min cost flow problem - max flow
problem - CPM/PERT.
UNIT-IV
Scheduling and sequencing - single server and multiple server models - deterministic inventory
models - Probabilistic inventory control models - Geometric Programming.
UNIT-V
Competitive Models, Single and Multi-Channel Problems, Sequencing Models, Dynamic
Programming, Flow in Networks, Elementary Graph Theory, Game Theory Simulation.
REFERENCE:
1. Kanthi Swarup, P.K. Gupta and Man Mohan, Operations Research, 14 th Edition, Sultan
Chand and Sons, New Delhi, 2008.
2. S. D. Sharma, Operations Research, Kedar Nath and Ram Nath, Meerut,2008.
3. H.A. Taha, Operations Research, An Introduction, PHI, 2008
4. H.M. Wagner, Principles of Operations Research, PHI, Delhi, 1982.
5. J.C. Pant, Introduction to Optimisation: Operations Research, Jain Brothers, Delhi, 2008
6. Hitler Libermann Operations Research: McGraw Hill Pub. 2009
7. Pannerselvam, Operations Research: Prentice Hall of India 2010
8. Harvey M Wagner, Principles of Operations Research: Prentice Hall of India 2010
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
II Year - I Semester
3
0
0
3
Open Elective: b). CONSTRUCTION MANAGEMENT
(Common to M. Tech - Structural Engineering, Structural Engineering & Structural Design, Computer
Aided Structural Analysis & Design, and Soil Mechanics & Foundation Engineering)
COURSE OUTCOME:
Able to plan, coordination, and control of a project from beginning to completion.
Adopting the most effect method for meeting the requirement in order to produce a
functionally and financially viable project.
UNIT -I
Management process- Roles. Management theories. Social responsibilities. Planning and strategic
management. Strategy implementation. Decision making: tools and techniques ? Organizational
structure. Human resource management- motivation performance- leadership.
UNIT-II
Classification of Construction projects, Construction stages, Resources- Functions of
Construction Management and its Applications. Preliminary Planning- Collection of Data-
Contract Planning ? Scientific Methods of Management: Network Techniques in construction
management - Bar chart, Gant chart, CPM, PERT- Cost & Time optimization.
UNIT-III
Resource planning - planning for manpower, materials, costs, equipment. Labour -Scheduling -
Forms of scheduling - Resource allocation. budget and budgetary control methods
UNIT-IV
Contract - types of contract, contract document, and specification, important conditions of
contract ? tender and tender document - Deposits by the contractor - Arbitration. negotiation -
M.Book - Muster roll -stores.
UNIT-V
Management Information System - Labour Regulations: Social Security - welfare Legislation -
Laws relating to Wages, Bonus and Industrial disputes, Labour Administration - Insurance and
Safety Regulations - Workmen's Compensation Act -other labour Laws - Safety in construction:
legal and financial aspects of accidents in construction. occupational and safety hazard
assessment. Human factors in safety. Legal and financial aspects of accidents in construction.
Occupational and safety hazard assessment.
REFERENCE:
1. Ghalot, P.S., Dhir, D.M., Construction Planning and Management, Wiley Eastern
Limited,1992.
2. Chitkara,K.K., Construction Project Management? Tata McGraw Hill Publishing Co, Ltd.,
New Delhi,998.
3. Punmia,B,C., Project Planning and Control with PERT and CPM, Laxmi Publications, New
Delhi,1987.
4. Sengupta, B. &Guha, H, Construction Management and Planning by: Tata McGraw-hill
publications.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
II Year - I Semester
3
0
0
3
Open Elective: c). GREEN TESCHNOLOGY
(Common to M. Tech - Structural Engineering, Structural Engineering & Structural Design,
and Computer Aided Structural Analysis & Design)
COURSE OUTCOMES:
Upon successful completion of this course, the students will be able to:
Enlist different concepts of green technologies in a project
Understand the principles of Energy efficient technologies
Estimate the carbon credits of various activities
Recognize the benefits of green fuels with respect to sustainable development.
UNIT- I
Introduction: Green Technology ? definition- Importance ? Historical evolution ? advantages and
disadvantages of green technologies-factors affecting green technologies- Role of Industry,
Government and Institutions ? Industrial Ecology ? role of industrial ecology in green
technology.
Cleaner Production (CP): Definition ? Importance ? Historical evolution - Principles of Cleaner
Production?Benefits?Promotion ? Barriers ? Role of Industry.
UNIT- II
Cleaner Production Project Development and Implementation:
Government and Institutions ? clean development mechanism, reuse, recovery, recycle, raw
material substitution-Wealth from waste, case studies.
Overview of CP Assessment Steps and Skills, Process Flow Diagram, Material Balance, CP
Option Generation ? Technical and Environmental Feasibility analysis ? Economic valuation of
alternatives - Total Cost Analysis ? CP Financing ? Preparing a Program Plan ? Measuring
Progress- ISO 14000.
UNIT- III
Pollution Prevention and Cleaner Production Awareness Plan ? Waste audit ? Environmental
Statement, carbon credit, carbon sequestration, carbon trading, Life Cycle Assessment - Elements
of LCA ? Life Cycle Costing ? Eco Labelling.
UNIT ?IV
Availability and need of conventional energy resources, major environmental problems related to
the conventional energy resources, future possibilities of energy need and availability. Non-
conventional energy sources: Solar Energy-solar energy conversion technologies and devices,
their principles, working and application.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
UNIT- V
Green Fuels ? Definition-benefits and challenges ? comparison of green fuels with conventional
fossil fuels with reference to environmental, economical and social impacts- public policies and
market-driven initiatives.
Biomass energy: Concept of biomass energy utilization, types of biomass energy, conversion
processes, Wind Energy, energy conversion technologies, their principles, equipment and
suitability in Indian context; tidal and geothermal energy.
REFERENCES:
1. `Pollution Prevention: Fundamentals and Practice' by Paul L Bishop (2000), McGraw Hill
International.
2. `Cleaner Production Audit' by Prasad Modak, C.Visvanathan and MandarParasnis (1995),
Environmental System Reviews, No.38, Asian Institute of Technology, Bangkok
3. `Non-conventional Energy Sources' by Rai G.D.
4. `Energy, The Solar Hydrogen Alternative' by Bokris J.O.
5. Waste Energy Utilization Technology' by Kiang Y. H.
6. `Solar Energy' by Sukhatme S.P.
7. `Pollution Prevention and Abatement Handbook ? Towards Cleaner Production' by World
Bank Group (1998), World Bank and UNEP, Washington D.C.
8. `Handbook of Organic Waste Conversion' by Bewik M.W.M.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
SEMINAR
Course Outcomes: At the end of the course, the student will be able to
CO1 Collect research material on some topic and to summaries it report and give to
present the same
Mapping of Course Outcomes with Program Outcomes:
PO
Course Out Comes PO1
PO2
PO3
PO4
PO5
PO6
7
CO1
--
--
1
1
2
2
2
1. Slightly 2. Moderately 3. Substantially
DESIGN PROJECT
Course Outcomes: At the end of the course, the student will be able to
CO1 Analyse, design and prepare a report on Special Design topic related to Structural
Engineering
Mapping of Course Outcomes with Program Outcomes:
PO
Course Out Comes PO1
PO2
PO3
PO4
PO5
PO6
7
CO1
1
1
2
3
1
3
1. Slightly 2. Moderately 3. Substantially
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
L
T
P
C
II Year - I Semester
0
0
32
16
DISSERTATION / THESIS
Course Outcomes: At the end of the course, the student will be able to
CO1
Identifying the topic after thorough review of literature on chosen topic and Can able to do the
Project either Experimental Work or analytical Work
Mapping of Course Outcomes with Program Outcomes:
Course Out Comes
PO1
PO2
PO3
PO4
PO5
PO6
PO7
CO1
1
2
2
3
3
3
1. Slightly 2. Moderately 3. Substantially
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
AUDIT 1 and 2: ENGLISH FOR RESEARCH PAPER WRITING
Course objectives:
Students will be able to:
1. Understand that how to improve your writing skills and level of readability
2. Learn about what to write in each section
3. Understand the skills needed when writing a Title Ensure the good quality of paper at very first-time
submission
Syllabus
Units
CONTENTS
Hours
1
Planning and Preparation, Word Order, Breaking up long sentences, 4
Structuring Paragraphs and Sentences, Being Concise
and Removing Redundancy, Avoiding Ambiguity and Vagueness
2
Clarifying Who Did What, Highlighting Your Findings, Hedging and 4
Criticising, Paraphrasing and Plagiarism, Sections of a Paper,
Abstracts. Introduction
3
Review of the Literature, Methods, Results, Discussion,
4
Conclusions, The Final Check.
4
key skills are needed when writing a Title, key skills are needed when 4
writing an Abstract, key skills are needed when writing an
Introduction, skills needed when writing a Review of the Literature,
5
skills are needed when writing the Methods, skills needed when writing the 4
Results, skills are needed when writing the Discussion,
skills are needed when writing the Conclusions
6
useful phrases, how to ensure paper is as good as it could possibly
4
be the first- time submission
Suggested Studies:
1. Goldbort R (2006) Writing for Science, Yale University Press (available on Google Books)
2. Day R (2006) How to Write and Publish a Scientific Paper, Cambridge University Press
3. Highman N (1998), Handbook of Writing for the Mathematical Sciences, SIAM.
Highman'sbook .
4. Adrian Wallwork , English for Writing Research Papers, Springer New York Dordrecht
Heidelberg London, 2011
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
AUDIT 1 and 2: DISASTER MANAGEMENT
Course Objectives: -Students will be able to:
1.learn to demonstrate a critical understanding of key concepts in disaster risk reduction and
humanitarian response.
2.critically evaluate disaster risk reduction and humanitarian response policy and practice from
multiple perspectives.
3.develop an understanding of standards of humanitarian response and practical relevance in specific
types of disasters and conflict situations.
4.critically understand the strengths and weaknesses of disaster management approaches, planning and
programming in different countries, particularly their home country or the countries
they work in
Syllabus
Units CONTENTS
Hours
1
Introduction
4
Disaster: Definition, Factors And Significance; Difference Between Hazard
And Disaster; Natural And Manmade Disasters: Difference,
Nature, Types And Magnitude.
2
Repercussions Of Disasters And Hazards: Economic Damage, Loss Of
4
Human And Animal Life, Destruction Of Ecosystem.
Natural Disasters: Earthquakes, Volcanisms, Cyclones, Tsunamis, Floods,
Droughts And Famines, Landslides And Avalanches, Man- made disaster:
Nuclear Reactor Meltdown, Industrial Accidents, Oil Slicks And Spills,
Outbreaks Of Disease And Epidemics, War And
Conflicts.
3
Disaster Prone Areas In India
4
Study Of Seismic Zones; Areas Prone To Floods And Droughts, Landslides
And Avalanches; Areas Prone To Cyclonic And Coastal Hazards With Special
Reference To Tsunami; Post-Disaster Diseases
And Epidemics
4
Disaster Preparedness And Management
4
Preparedness: Monitoring Of Phenomena Triggering A Disaster Or Hazard;
Evaluation Of Risk: Application Of Remote Sensing, Data From
Meteorological And Other Agencies, Media Reports:
Governmental And Community Preparedness.
5
Risk Assessment
4
Disaster Risk: Concept And Elements, Disaster Risk Reduction, Global And
National Disaster Risk Situation. Techniques Of Risk Assessment, Global Co-
Operation In Risk Assessment And Warning, People's
Participation In Risk Assessment. Strategies for Survival.
6
Disaster Mitigation
4
Meaning, Concept And Strategies Of Disaster Mitigation, Emerging
Trends In Mitigation. Structural Mitigation And Non-Structural Mitigation,
Programs Of Disaster Mitigation In India.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
Suggested Readings:
1. R. Nishith, Singh AK, "Disaster Management in India: Perspectives, issues and strategies "'New Royal
book Company.
2. Sahni, PardeepEt.Al. (Eds.)," Disaster Mitigation Experiences And Reflections", Prentice Hall Of
India, New Delhi.
3. Goel S. L. , Disaster Administration And Management Text And Case Studies" ,Deep &Deep
Publication Pvt. Ltd., New Delhi.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
AUDIT 1 and 2: SANSKRIT FOR TECHNICAL KNOWLEDGE
Course Objectives
1. To get a working knowledge in illustrious Sanskrit, the scientific language in the world
2. Learning of Sanskrit to improve brain functioning
3. Learning of Sanskrit to develop the logic in mathematics, science & other subjects enhancing
the memory power
4. The engineering scholars equipped with Sanskrit will be able to explore the huge knowledge
from ancient literature
Syllabus
Unit Content
Hours
1
Alphabets in Sanskrit,
4
Past/Present/Future Tense,
Simple Sentences
2
Order
4
Introduction of roots
Technical information about Sanskrit Literature
3
Technical concepts of Engineering-Electrical,
4
4
Technical concepts of Engineering - Mechanical.
4
5
Technical concepts of Engineering - Architecture.
4
6
Technical concepts of Engineering ? Mathematics.
4
Suggested reading
1. "Abhyaspustakam" ? Dr.Vishwas, Samskrita-Bharti Publication, New Delhi
2. "Teach Yourself Sanskrit" Prathama Deeksha-Vempati Kutumbshastri, Rashtriya Sanskrit Sansthanam,
New Delhi Publication
3. "India's Glorious Scientific Tradition" Suresh Soni, Ocean books (P) Ltd., New Delhi.
Course Output
Students will be able to
1. Understanding basic Sanskrit language
2. Ancient Sanskrit literature about science & technology can be understood
3. Being a logical language will help to develop logic in students
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
AUDIT 1 and 2: VALUE EDUCATION
Course Objectives
Students will be able to
1. Understand value of education and self- development
2. Imbibe good values in students
3. Let the should know about the importance of character
Syllabus
Unit Content
Hours
1
Values and self-development ?Social values and individual attitudes. Work ethics, 4
Indian vision of humanism.
Moral and non- moral valuation. Standards and principles.
Value judgements
2
Importance of cultivation of values.
4
Sense of duty. Devotion, Self-reliance. Confidence, Concentration. Truthfulness,
Cleanliness.
Honesty, Humanity. Power of faith, National Unity.
Patriotism.Love for nature ,Discipline
3
Personality and Behavior Development - Soul and Scientific attitude. Positive 4
Thinking. Integrity and discipline.
Punctuality, Love and Kindness.
Avoid fault Thinking.
4
Free from anger, Dignity of labour.
4
Universal brotherhood and religious tolerance.
True friendship.
Happiness Vs suffering, love for truth.
Aware of self-destructive habits.
Association and Cooperation.
Doing best for saving nature
5
Character and Competence ?Holy books vs Blind faith.
4
Self-management and Good health.
Science of reincarnation.
Equality, Nonviolence ,Humility, Role of Women.
6
All religions and same message.
4
Mind your Mind, Self-control.
Honesty, Studying effectively
Suggested reading
1 Chakroborty, S.K. "Values and Ethics for organizations Theory and practice", Oxford University
Press, New Delhi
Course outcomes
Students will be able to 1.Knowledge of self-development
2.Learn the importance of Human values 3.Developing the overall personality
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
AUDIT 1 and 2: CONSTITUTION OF INDIA
Course Objectives:
Students will be able to:
1. Understand the premises informing the twin themes of liberty and freedom from a civil rights
perspective.
2. To address the growth of Indian opinion regarding modern Indian intellectuals' constitutional
role and entitlement to civil and economic rights as well as the emergence of nationhood in the
early years of Indian nationalism.
3. To address the role of socialism in India after the commencement of the Bolshevik Revolution
in 1917 and its impact on the initial drafting of the Indian Constitution.
Syllabus
Units
Content
Hours
History of Making of the Indian Constitution:
1
History
4
Drafting Committee, ( Composition & Working)
Philosophy of the Indian Constitution:
2
Preamble Salient Features
4
Contours of Constitutional Rights & Duties:
Fundamental Rights
Right to Equality
Right to Freedom
3
Right against Exploitation
4
Right to Freedom of Religion
Cultural and Educational Rights
Right to Constitutional Remedies
Directive Principles of State Policy
Fundamental Duties.
Organs of Governance:
Parliament
Composition
Qualifications and Disqualifications
Powers and Functions
4
Executive
4
President
Governor
Council of Ministers
Judiciary, Appointment and Transfer of Judges, Qualifications
Powers and Functions
Local Administration:
District's Administration head: Role and Importance,
5
Municipalities: Introduction, Mayor and role of Elected Representative, CE of
Municipal Corporation.
4
Pachayati raj: Introduction, PRI: ZilaPachayat.
Elected officials and their roles, CEO ZilaPachayat: Position and role.
Block level: Organizational Hierarchy (Different departments),
Village level: Role of Elected and Appointed officials,
Importance of grass root democracy
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
Election Commission:
Election Commission: Role and Functioning.
6
Chief Election Commissioner and Election Commissioners.
4
State Election Commission: Role and Functioning.
Institute and Bodies for the welfare of SC/ST/OBC and women.
Suggested reading
1. The Constitution of India, 1950 (Bare Act), Government Publication.
2. Dr. S. N. Busi, Dr. B. R. Ambedkar framing of Indian Constitution, 1st Edition, 2015.
3. M. P. Jain, Indian Constitution Law, 7th Edn., Lexis Nexis, 2014.
4. D.D. Basu, Introduction to the Constitution of India, Lexis Nexis, 2015.
Course Outcomes:
Students will be able to:
1. Discuss the growth of the demand for civil rights in India for the bulk of Indians before the arrival
of Gandhi in Indian politics.
2. Discuss the
intellectual
origins of
the
framework
of
argument
that
informed
the conceptualization of social reforms leading to revolution in India.
3. Discuss the circumstances surrounding the foundation of the Congress Socialist Party [CSP] under
the leadership of Jawaharlal Nehru and the eventual failure of the proposal of direct elections
through adult suffrage in the Indian Constitution.
4. Discuss the passage of the Hindu Code Bill of 1956.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
AUDIT 1 and 2: PEDAGOGY STUDIES
Course Objectives:
Students will be able to:
4. Review existing evidence on the review topic to inform programme design and policy
making undertaken by the DfID, other agencies and researchers.
5. Identify critical evidence gaps to guide the development.
Syllabus
Units Content
Hours
Introduction and Methodology:
Aims and rationale, Policy background, Conceptual framework and terminology
1
Theories of learning, Curriculum, Teacher education.
4
Conceptual framework, Research questions.
Overview of methodology and Searching.
Thematic overview: Pedagogical practices are being used by teachers in formal
2
and informal classrooms in developing countries.
4
Curriculum, Teacher education.
3
Evidence on the effectiveness of pedagogical practices
Methodology for the in depth stage: quality assessment of included studies.
How can teacher education (curriculum and practicum) and the school curriculum
and guidance materials best support effective pedagogy?
4
Theory of change.
Strength and nature of the body of evidence for effective pedagogical practices.
4
Pedagogic theory and pedagogical approaches.
4
Teachers' attitudes and beliefs and Pedagogic strategies.
Professional development: alignment with classroom practices and follow-up
support
Peer support
4
5
Support from the head teacher and the community.
Curriculum and assessment
Barriers to learning: limited resources and large class sizes
6
Research gaps and future directions
4
Research design
Contexts
Pedagogy
Teacher education
Curriculum and assessment
Dissemination and research impact.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
Suggested reading
1. Ackers J, Hardman F (2001) Classroom interaction in Kenyan primary schools, Compare, 31 (2):
245-261.
2. Agrawal M (2004) Curricular reform in schools: The importance of evaluation, Journal of
Curriculum Studies, 36 (3): 361-379.
3. Akyeampong K (2003) Teacher training in Ghana - does it count? Multi-site teacher education
research project (MUSTER) country report 1. London: DFID.
4. Akyeampong K, Lussier K, Pryor J, Westbrook J (2013) Improving teaching and learning of basic
maths and reading in Africa: Does teacher preparation count? International Journal Educational
Development, 33 (3): 272?282.
5. Alexander RJ (2001) Culture and pedagogy: International comparisons in primary education.
Oxford and Boston: Blackwell.
6. Chavan M (2003) Read India: A mass scale, rapid, `learning to read' campaign.
7. www.pratham.org/images/resource%20working%20paper%202.pdf.
Course Outcomes:
Students will be able to understand:
1. What pedagogical practices are being used by teachers in formal and informal classrooms in
developing countries?
2. What is the evidence on the effectiveness of these pedagogical practices, in what conditions, and
with what population of learners?
3. How can teacher education (curriculum and practicum) and the school curriculum and guidance
materials best support effective pedagogy?
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
AUDIT 1 and 2: STRESS MANAGEMENT BY YOGA
Course Objectives
1. To achieve overall health of body and mind
2. To overcome stress
Syllabus
Unit Content
Hours
1
Definitions of Eight parts of yog. ( Ashtanga )
5
2
Yam and Niyam. Do`s and Don't's in life.
5
Ahinsa, satya, astheya, bramhacharya and aparigraha
3
Yam and Niyam. Do`s and Don't's in life.
5
Shaucha, santosh, tapa, swadhyay, ishwarpranidhan
4
Asan and Pranayam
5
Various yog poses and their benefits for mind & body
5
Regularization of breathing techniques and its effects-Types of pranayam
4
Suggested reading
1. `Yogic Asanas for Group Tarining-Part-I" : Janardan Swami YogabhyasiMandal, Nagpur
2. "Rajayoga or conquering the Internal Nature" by Swami Vivekananda, Advaita Ashrama
(Publication Department), Kolkata
Course Outcomes:
Students will be able to:
1. Develop healthy mind in a healthy body thus improving social health also
2. Improve efficiency
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA ? 533 003, Andhra Pradesh, India
AUDIT 1 and 2: PERSONALITY DEVELOPMENT THROUGH LIFE ENLIGHTENMENT
SKILLS
Course Objectives
1. To learn to achieve the highest goal happily
2. To become a person with stable mind, pleasing personality and determination
3. To awaken wisdom in students
Syllabus
Unit
Content
Hours
1
Neetisatakam-Holistic development of personality
4
Verses- 19,20,21,22 (wisdom)
Verses- 29,31,32 (pride & heroism)
Verses- 26,28,63,65 (virtue)
2
Neetisatakam-Holistic development of personality
4
Verses- 52,53,59 (dont's)
Verses- 71,73,75,78 (do's)
3
Approach to day to day work and duties.
4
Shrimad Bhagwad Geeta : Chapter 2-Verses 41, 47,48,
4
Chapter 3-Verses 13, 21, 27, 35, Chapter 6-Verses 5,13,17, 23, 35,
4
Chapter 18-Verses 45, 46, 48.
5
Statements of basic knowledge.
4
Shrimad Bhagwad Geeta: Chapter2-Verses 56, 62, 68
Chapter 12 -Verses 13, 14, 15, 16,17, 18
6
Personality of Role model. Shrimad Bhagwad Geeta: Chapter2-Verses 4
17, Chapter 3-Verses 36,37,42,
Chapter 4-Verses 18, 38,39
Chapter18 ? Verses 37,38,63
Suggested reading
1. "Srimad Bhagavad Gita" by Swami Swarupananda Advaita Ashram (Publication Department), Kolkata
2. Bhartrihari's Three Satakam (Niti-sringar-vairagya) by P.Gopinath, Rashtriya Sanskrit Sansthanam,
New Delhi.
Course Outcomes
Students will be able to
1. Study of Shrimad-Bhagwad-Geeta will help the student in developing his personality and achieve the
highest goal in life
2. The person who has studied Geeta will lead the nation and mankind to peace and prosperity
3. Study of Neetishatakam will help in developing versatile personality of students
This post was last modified on 16 March 2021