Download JNTUK M.Tech R13 Machine Design R13

Download JNTU Kakinada (Jawaharlal Nehru Technological University, Kakinada) M.Tech (Master of Technology) R13 Machine Design R13

ACADEMIC REGULATIONS
COURSE STRUCTURE
AND
DETAILED SYLLABUS
For
M.Tech. MECHANICAL BRANCH
Common for Specialization of :
MACHINE DESIGN &
MECHANICAL ENGEERING DESIGN
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY KAKINADA
KAKINADA - 533 003, Andhra Pradesh, India


Machine Design
1
ACADEMIC REGULATIONS R13 FOR M. Tech (REGULAR)
DEGREE COURSE
Applicable for the students of M. Tech (Regular) Course from the
Academic Year 2013-14 onwards
The M. Tech Degree of Jawaharlal Nehru Technological University
Kakinada shall be conferred on candidates who are admitted to the program
and who fulfil all the requirements for the award of the Degree.
1.0 ELIGIBILITY FOR ADMISSIONS
Admission to the above program shall be made subject to eligibility,
qualification and specialization as prescribed by the University from time to
time.
Admissions shall be made on the basis of merit/rank obtained by the
candidates at the qualifying Entrance Test conducted by the University or
on the basis of any other order of merit as approved by the University,
subject to reservations as laid down by the Govt. from time to time.
2.0 AWARD OF M. Tech DEGREE
2.1
A student shall be declared eligible for the award of the M. Tech
Degree, if he pursues a course of study in not less than two and not
more than four academic years.
2.2
The student shall register for all 80 credits and secure all the 80 credits.
2.3
The minimum instruction days in each semester are 90.
3.0 A. COURSES OF STUDY
The following specializations are offered at present for the M. Tech
course of study.
1.
M.Tech- Structural Engineering
2.
M.Tech- Transportation Engineering
3.
M.Tech- Infrastructure Engineering & Management
4.
ME- Soil Mechanics and Foundation Engineering
5.
M.Tech- Environmental Engineering
6.
M.Tech-Geo-Informatics
7.
M.Tech-Spatial Information Technology

2
2013-14
8.
M.Tech- Civil Engineering
9.
M.Tech -Geo-Technical Engineering
10.
M.Tech- Remote Sensing
11.
M.Tech- Power Electronics
12.
M.Tech- Power & Industrial Drives
13.
M.Tech- Power Electronics & Electrical Drives
14.
M.Tech- Power System Control & Automation
15.
M.Tech- Power Electronics & Drives
16.
M.Tech- Power Systems
17.
M.Tech- Power Systems Engineering
18.
M.Tech- High Voltage Engineering
19.
M.Tech- Power Electronics and Power Systems
20.
M.Tech- Power System and Control
21.
M.Tech- Power Electronics & Systems
22.
M.Tech- Electrical Machines and Drives
23.
M.Tech- Advanced Power Systems
24.
M.Tech- Power Systems with Emphasis on High Voltage Engineering
25.
M.Tech- Control Engineering
26.
M.Tech- Control Systems
27.
M.Tech- Electrical Power Engineering
28.
M.Tech- Power Engineering & Energy System
29.
M.Tech- Thermal Engineering
30.
M.Tech- CAD/CAM
31.
M.Tech- Machine Design
32.
M.Tech- Computer Aided Design and Manufacture
33.
M.Tech- Advanced Manufacturing Systems
34.
M.Tech-Computer Aided Analysis & Design
35.
M.Tech- Mechanical Engineering Design
36.
M.Tech- Systems and Signal Processing
37.
M.Tech- Digital Electronics and Communication Systems
38.
M.Tech- Electronics & Communications Engineering
39.
M.Tech- Communication Systems
40.
M.Tech- Communication Engineering & Signal Processing
41.
M.Tech- Microwave and Communication Engineering
42.
M.Tech- Telematics

Machine Design
3
43.
M.Tech- Digital Systems & Computer Electronics
44.
M.Tech- Embedded System
45.
M.Tech- VLSI
46.
M.Tech- VLSI Design
47.
M.Tech- VLSI System Design
48.
M.Tech- Embedded System & VLSI Design
49.
M.Tech- VLSI & Embedded System
50.
M.Tech- VLSI Design & Embedded Systems
51.
M.Tech- Image Processing
52.
M.Tech- Digital Image Processing
53.
M.Tech- Computers & Communication
54.
M.Tech- Computers & Communication Engineering
55.
M.Tech- Instrumentation & Control Systems
56.
M.Tech ? VLSI & Micro Electronics
57.
M.Tech ? Digital Electronics & Communication Engineering
58.
M.Tech- Embedded System & VLSI
59.
M.Tech- Computer Science & Engineering
60.
M.Tech- Computer Science
61.
M.Tech- Computer Science & Technology
62.
M.Tech- Computer Networks
63.
M.Tech- Computer Networks & Information Security
64.
M.Tech- Information Technology
65.
M.Tech- Software Engineering
66.
M.Tech- Neural Networks
67.
M.Tech- Chemical Engineering
68.
M.Tech- Biotechnology
69.
M.Tech- Nano Technology
70.
M.Tech- Food Processing
71.
M.Tech- Avionics
and any other course as approved by AICTE/ University from time to time.

4
2013-14
3.0 B.
Departments offering M. Tech Programmes with specializations
are noted below:

Civil Engg.
1.
M.Tech- Structural Engineering
2.
M.Tech- Transportation Engineering
3.
M.Tech- Infrastructure Engineering & Management
4.
ME- Soil Mechanics and Foundation Engineering
5.
M.Tech- Environmental Engineering
6.
M.Tech-Geo-Informatics
7.
M.Tech-Spatial Information Technology
8.
M.Tech- Civil Engineering
9.
M.Tech -Geo-Technical Engineering
10. M.Tech- Remote Sensing
E E E
1.
M.Tech- Power Electronics
2.
M.Tech- Power & Industrial Drives
3.
M.Tech- Power Electronics & Electrical Drives
4.
M.Tech- Power System Control & Automation
5.
M.Tech- Power Electronics & Drives
6.
M.Tech- Power Systems
7.
M.Tech- Power Systems Engineering
8.
M.Tech- High Voltage Engineering
9.
M.Tech- Power Electronics and Power Systems
10. M.Tech- Power System and Control
11. M.Tech- Power Electronics & Systems
12. M.Tech- Electrical Machines and Drives
13. M.Tech- Advanced Power Systems
14. M.Tech- Power Systems with Emphasis on High
Voltage Engineering
15. M.Tech- Control Engineering
16. M.Tech- Control Systems
17. M.Tech- Electrical Power Engineering
18. M.Tech- Power Engineering & Energy System
M E
1.
M.Tech- Thermal Engineering
2.
M.Tech- CAD/CAM
3.
M.Tech- Machine Design
4.
M.Tech- Computer Aided Design and Manufacture
5.
M.Tech- Advanced Manufacturing Systems
6.
M.Tech-Computer Aided Analysis & Design
7.
M.Tech- Mechanical Engineering Design

Machine Design
5
E C E
1.
M.Tech- Systems and Signal Processing
2.
M.Tech- Digital Electronics and Communication
Systems
3.
M.Tech- Electronics & Communications Engineering
4.
M.Tech- Communication Systems
5.
M.Tech- Communication Engineering & Signal
Processing
6.
M.Tech- Microwave and Communication Engineering
7.
M.Tech- Telematics
8.
M.Tech- Digital Systems & Computer Electronics
9.
M.Tech- Embedded System
10. M.Tech- VLSI
11. M.Tech- VLSI Design
12. M.Tech- VLSI System Design
13. M.Tech- Embedded System & VLSI Design
14. M.Tech- VLSI & Embedded System
15. M.Tech- VLSI Design & Embedded Systems
16. M.Tech- Image Processing
17. M.Tech- Digital Image Processing
18. M.Tech- Computers & Communication
19. M.Tech- Computers & Communication Engineering
20. M.Tech- Instrumentation & Control Systems
21. M.Tech ? VLSI & Micro Electronics
22. M.Tech ? Digital Electronics & Communication
Engineering
23. M.Tech- Embedded System & VLSI
CSE
1.
M.Tech- Computer Science & Engineering
2.
M.Tech- Computer Science
3.
M.Tech- Computer Science & Technology
4.
M.Tech- Computer Networks
5.
M.Tech- Computer Networks & Information Security
6.
M.Tech- Information Technology
7.
M.Tech- Software Engineering
8.
M.Tech- Neural Networks
Others
1.
M.Tech- Chemical Engineering
2.
M.Tech- Biotechnology
3.
M.Tech- Nano Technology
4.
M.Tech- Food Processing
5.
M.Tech- Avionics

6
2013-14
4.0 ATTENDANCE
4.1
A student shall be eligible to write University examinations if he
acquires a minimum of 75% of attendance in aggregate of all the
subjects.
4.2
Condonation of shortage of attendance in aggregate up to 10%
(65% and above and below 75%) in each semester shall be
granted by the College Academic Committee.
4.3
Shortage of Attendance below 65% in aggregate shall not be
condoned.
4.4
Students whose shortage of attendance is not condoned in
any semester are not eligible to write their end semester
examination of that class.
4.5
A prescribed fee shall be payable towards condonation of
shortage of attendance.
4.6
A student shall not be promoted to the next semester unless he
satisfies the attendance requirement of the present semester, as
applicable. They may seek readmission into that semester when
offered next. If any candidate fulfills the attendance requirement
in the present semester, he shall not be eligible for readmission
into the same class.
5.0 EVALUATION
The performance of the candidate in each semester shall be evaluated
subject-wise, with a maximum of 100 marks for theory and 100 marks for
practicals, on the basis of Internal Evaluation and End Semester Examination.
5.1
For the theory subjects 60 marks shall be awarded based on the
performance in the End Semester Examination and 40 marks
shall be awarded based on the Internal Evaluation. The internal
evaluation shall be made based on the average of the marks
secured in the two Mid Term-Examinations conducted-one in
the middle of the Semester and the other immediately after the
completion of instruction. Each mid term examination shall be
conducted for a total duration of 120 minutes with 4 questions
(without choice) each question for 10 marks. End semester
examination is conducted for 60 marks for 5 questions to be
answered out of 8 questions.

Machine Design
7
5.2
For practical subjects, 60 marks shall be awarded based on the
performance in the End Semester Examinations and 40 marks
shall be awarded based on the day-to-day performance as
Internal Marks.
5.3
There shall be two seminar presentations during III semester
and IV semester. For seminar, a student under the supervision
of a faculty member, shall collect the literature on a topic and
critically review the literature and submit it to the department in
a report form and shall make an oral presentation before the
Project Review Committee consisting of Head of the Department,
Supervisor and two other senior faculty members of the
department. For each Seminar there will be only internal
evaluation of 50 marks. A candidate has to secure a minimum of
50% of marks to be declared successful.
5.4
A candidate shall be deemed to have secured the minimum
academic requirement in a subject if he secures a minimum of
40% of marks in the End semester Examination and a minimum
aggregate of 50% of the total marks in the End Semester
Examination and Internal Evaluation taken together.
5.5
In case the candidate does not secure the minimum academic
requirement in any subject (as specified in 5.4) he has to reappear
for the End semester Examination in that subject. A candidate
shall be given one chance to re-register for each subject provided
the internal marks secured by a candidate are less than 50% and
has failed in the end examination. In such a case, the candidate
must re-register for the subject(s) and secure the required
minimum attendance. The candidate's attendance in the re-
registered subject(s) shall be calculated separately to decide
upon his eligibility for writing the end examination in those
subject(s). In the event of the student taking another chance,
his internal marks and end examination marks obtained in the
previous attempt stand cancelled. For re-registration the
candidates have to apply to the University through the college
by paying the requisite fees and get approval from the
University before the start of the semester in which re-
registration is required.

8
2013-14
5.6
In case the candidate secures less than the required attendance
in any re registered subject (s), he shall not be permitted to
write the End Examination in that subject. He shall again re-
register the subject when next offered.
5.7
Laboratory examination for M. Tech. courses must be conducted
with two Examiners, one of them being the Laboratory Class
Teacher or teacher of the respective college and the second
examiner shall be appointed by the university from the panel of
examiners submitted by the respective college.
6.0 EVALUATION OF PROJECT/DISSERTATION WORK
Every candidate shall be required to submit a thesis or dissertation
on a topic approved by the Project Review Committee.
6.1
A Project Review Committee (PRC) shall be constituted with
Head of the Department and two other senior faculty members.
6.2
Registration of Project Work: A candidate is permitted to register
for the project work after satisfying the attendance requirement
of all the subjects, both theory and practical.
6.3
After satisfying 6.2, a candidate has to submit, in consultation
with his project supervisor, the title, objective and plan of action
of his project work for approval. The student can initiate the
Project work, only after obtaining the approval from the Project
Review Committee (PRC).
6.4
If a candidate wishes to change his supervisor or topic of the
project, he can do so with the approval of the Project Review
Committee (PRC). However, the Project Review Committee (PRC)
shall examine whether or not the change of topic/supervisor
leads to a major change of his initial plans of project proposal.
If yes, his date of registration for the project work starts from
the date of change of Supervisor or topic as the case may be.
6.5
A candidate shall submit his status report in two stages at least
with a gap of 3 months between them.
6.6
The work on the project shall be initiated at the beginning of
the II year and the duration of the project is two semesters. A
candidate is permitted to submit Project Thesis only after

Machine Design
9
successful completion of theory and practical course with the
approval of PRC not earlier than 40 weeks from the date of
registration of the project work. The candidate has to pass all
the theory and practical subjects before submission of the
Thesis.
6.7
Three copies of the Project Thesis certified by the supervisor
shall be submitted to the College/School/Institute.
6.8
The thesis shall be adjudicated by one examiner selected by the
University. For this, the Principal of the College shall submit a
panel of 5 examiners, eminent in that field, with the help of the
guide concerned and head of the department.
6.9
If the report of the examiner is not favourable, the candidate
shall revise and resubmit the Thesis, in the time frame as decided
by the PRC. If the report of the examiner is unfavorable again,
the thesis shall be summarily rejected. The candidate has to re-
register for the project and complete the project within the
stipulated time after taking the approval from the University.
6.10 If the report of the examiner is favourable, Viva-Voce examination
shall be conducted by a board consisting of the Supervisor,
Head of the Department and the examiner who adjudicated the
Thesis. The Board shall jointly report the candidate's work as
one of the following:
A.
Excellent
B.
Good
C.
Satisfactory
D.
Unsatisfactory
The Head of the Department shall coordinate and make arrangements
for the conduct of Viva-Voce examination.
6.11 If the report of the Viva-Voce is unsatisfactory, the candidate
shall retake the Viva-Voce examination only after three months.
If he fails to get a satisfactory report at the second Viva-Voce
examination, the candidate has to re-register for the project and
complete the project within the stipulated time after taking the
approval from the University.

10
2013-14
7.0 AWARD OF DEGREE AND CLASS
After a student has satisfied the requirements prescribed for the
completion of the program and is eligible for the award of M. Tech. Degree
he shall be placed in one of the following four classes:
Class Awarded
% of marks to be secured
First Class with Distinction
70% and above (Without any
Supplementary Appearance )
First Class
Below 70% but not less than 60%
70% and above (With any
Supplementary Appearance )
Second Class
Below 60% but not less than 50%
The marks in internal evaluation and end examination shall be shown
separately in the memorandum of marks.
8.0 WITHHOLDING OF RESULTS
If the student has not paid the dues, if any, to the university or if any
case of indiscipline is pending against him, the result of the student will be
withheld. His degree will be withheld in such cases.
4.0 TRANSITORY REGULATIONS ( for R09 )
9.1
Discontinued or detained candidates are eligible for re-
admission into same or equivalent subjects at a time as and
when offered.
9.2
The candidate who fails in any subject will be given two
chances to pass the same subject; otherwise, he has to identify
an equivalent subject as per R13 academic regulations.
10. GENERAL
10.1 Wherever the words "he", "him", "his", occur in the
regulations, they include "she", "her", "hers".
10.2 The academic regulation should be read as a whole for the
purpose of any interpretation.
10.3 In the case of any doubt or ambiguity in the interpretation of
the above rules, the decision of the Vice-Chancellor is final.
10.4 The University may change or amend the academic regulations
or syllabi at any time and the changes or amendments made
shall be applicable to all the students with effect from the
dates notified by the University.

Machine Design
11
MALPRACTICES RULES
DISCIPLINARY ACTION FOR / IMPROPER CONDUCT IN
EXAMINATIONS
Nature of Malpractices/
Punishment
Improper conduct
If the candidate:
1. (a) Possesses or keeps accessible Expulsion from the examination hall
in examination hall, any paper, and cancellation of the
note book, programmable performance in that subject only.
calculators, Cell phones, pager,
palm computers or any other
form of material concerned
with or related to the subject
of the examination (theory or
practical) in which he is
appearing but has not made
use of (material shall include
any marks on the body of the
candidate which can be used
as an aid in the subject of the
examination)
(b)
Gives assistance or guidance Expulsion from the examination hall
or receives it from any other and cancellation of the
candidate orally or by any performance in that subject only of
other body language methods all the candidates involved. In case
or communicates through cell of an outsider, he will be handed
phones with any candidate or over to the police and a case is
persons in or outside the exam registered against him.
hall in respect of any matter.
2.
Has copied in the examination Expulsion from the examination hall
hall from any paper, book, and cancellation of the
programmable calculators, performance in that subject and all
palm computers or any other other subjects the candidate has
form of material relevant to the already appeared including
subject of the examination practical examinations and project

12
2013-14
(theory or practical) in which work and shall not be permitted to
the candidate is appearing.
appear for the remaining
examinations of the subjects of that
Semester/year. The Hall Ticket of
the candidate is to be cancelled
and sent to the University.
3.
Impersonates any other The candidate who has
candidate in connection with impersonated shall be expelled from
the examination.
examination hall. The candidate is
also debarred and forfeits the seat.
The performance of the original
candidate who has been
impersonated, shall be cancelled in
all the subjects of the examination
(including practicals and project
work) already appeared and shall
not be allowed to appear for
examinations of the remaining
subjects of that semester/year. The
candidate is also debarred for two
consecutive semesters from class
work and all University
examinations. The continuation of
the course by the candidate is
subject to the academic regulations
in connection with forfeiture of
seat. If the imposter is an outsider,
he will be handed over to the police
and a case is registered against him.
4.
Smuggles in the Answer book Expulsion from the examination hall
or additional sheet or takes out and cancellation of performance in
or arranges to send out the that subject and all the other
question paper during the subjects the candidate has already
examination or answer book or appeared including practical
additional sheet, during or after examinations and project work and

Machine Design
13
the examination.
shall not be permitted for the
remaining examinations of the
subjects of that semester/year. The
candidate is also debarred for two
consecutive semesters from class
work and all University
examinations. The continuation of
the course by the candidate is
subject to the academic regulations
in connection with forfeiture of seat.
5.
Uses objectionable, abusive or Cancellation of the performance in
offensive language in the that subject.
answer paper or in letters to the
examiners or writes to the
examiner requesting him to
award pass marks.
6.
Refuses to obey the orders of In case of students of the college,
the Chief Superintendent/ they shall be expelled from
Assistant ? Superintendent / examination halls and cancellation of
any officer on duty or their performance in that subject and
misbehaves or creates all other subjects the candidate(s)
disturbance of any kind in and has (have) already appeared and
around the examination hall or shall not be permitted to appear for
organizes a walk out or the remaining examinations of the
instigates others to walk out, subjects of that semester/year. The
or threatens the officer-in candidates also are debarred and
charge or any person on duty forfeit their seats. In case of
in or outside the examination outsiders, they will be handed over
hall of any injury to his person to the police and a police case is
or to any of his relations registered against them.
whether by words, either
spoken or written or by signs
or by visible representation,
assaults the officer-in-charge,
or any person on duty in or

14
2013-14
outside the examination hall or
any of his relations, or
indulges in any other act of
misconduct or mischief which
result in damage to or
destruction of property in the
examination hall or any part of
the College campus or
engages in any other act which
in the opinion of the officer on
duty amounts to use of unfair
means or misconduct or has
the tendency to disrupt the
orderly conduct of the
examination.
7.
Leaves the exam hall taking Expulsion from the examination hall
away answer script or and cancellation of performance in
intentionally tears of the script that subject and all the other
or any part thereof inside or subjects the candidate has already
outside the examination hall. appeared including practical
examinations and project work and
shall not be permitted for the
remaining examinations of the
subjects of that semester/year. The
candidate is also debarred for two
consecutive semesters from class
work and all University
examinations. The continuation of
the course by the candidate is
subject to the academic regulations
in connection with forfeiture of seat.
8.
Possess any lethal weapon or Expulsion from the examination hall
firearm in the examination hall. and cancellation of the performance
in that subject and all other subjects
the candidate has already appeared
including practical examinations
and project work and shall not be
permitted for the remaining

Machine Design
15
examinations of the subjects of that
semester/year. The candidate is
also debarred and forfeits the seat.
9.
If student of the college, who Student of the colleges expulsion
is not a candidate for the from the examination hall and
particular examination or any cancellation of the performance in
person not connected with the that subject and all other subjects
college indulges in any the candidate has already appeared
malpractice or improper including practical examinations
conduct mentioned in clause 6 and project work and shall not be
to 8.
permitted for the remaining
examinations of the subjects of that
semester/year. The candidate is also
debarred and forfeits the seat.
Person(s) who do not belong to the
College will be handed over to police
and, a police case will be registered
against them.
10.
Comes in a drunken condition Expulsion from the examination hall
to the examination hall.
and cancellation of the
performance in that subject and all
other subjects the candidate has
already appeared including
practical examinations and project
work and shall not be permitted for
the remaining examinations of the
subjects of that semester/year.
11.
Copying detected on the basis Cancellation of the performance in
of internal evidence, such as, that subject and all other subjects
during valuation or during the candidate has appeared
special scrutiny.
including practical examinations
and project work of that semester/
year examinations.
12.
If any malpractice is detected
which is not covered in the
above clauses 1 to 11 shall be
reported to the University for further action
to award suitable punishment.

16
2013-14
Malpractices identified by squad or special invigilators
1.
Punishments to the candidates as per the above guidelines.
2.
Punishment for institutions : (if the squad reports that the college is
also involved in encouraging malpractices)
(i)
A show cause notice shall be issued to the college.
(ii)
Impose a suitable fine on the college.
(iii)
Shifting the examination centre from the college to another
college for a specific period of not less than one year.

Machine Design
17
JAWAHARLAL NEHRU TECHNOLOGICAL
UNIVERSITY: KAKINADA
KAKINADA-533003, Andhra Pradesh (India)
For Constituent Colleges and Affiliated Colleges of JNTUK
Ragging
Prohibition of ragging in educational institutions Act 26 of 1997
Salient Features
Ragging within or outside any educational institution is prohibited.
Ragging means doing an act which causes or is likely to cause Insult
or Annoyance of Fear or Apprehension or Threat or Intimidation or
outrage of modesty or Injury to a student
Imprisonment upto
Fine Upto
Teasing,
Embarrassing and
6 Months
+
Rs. 1,000/-
Humiliation
Assaulting or
Using Criminal
1 Year
+
Rs. 2,000/-
force or Criminal
intimidation
Wrongfully
restraining or
2 Years
+
Rs. 5,000/-
confining or
causing hurt
Causing grievous
hurt, kidnapping
or Abducts or rape
5 Years
+
Rs.10,000/-
or committing
unnatural offence
Causing death or
10 Months
+
Rs. 50,000/-
abetting suicide
In Case of Emergency CALL TOLL FREE NO. : 1800 - 425 - 1288
LET US MAKE JNTUK A RAGGING FREE UNIVERSITY

18
2013-14
JAWAHARLAL NEHRU TECHNOLOGICAL
UNIVERSITY: KAKINADA
KAKINADA-533003, Andhra Pradesh (India)
For Constituent Colleges and Affiliated Colleges of JNTUK
Ragging
ABSOLUTELY
NO TO RAGGING
1.
Ragging is prohibited as per Act 26 of A.P. Legislative Assembly,
1997.
2.
Ragging entails heavy fines and/or imprisonment.
3.
Ragging invokes suspension and dismissal from the College.
4.
Outsiders are prohibited from entering the College and Hostel without
permission.
5.
Girl students must be in their hostel rooms by 7.00 p.m.
6.
All the students must carry their Identity Card and show them when
demanded
7.
The Principal and the Wardens may visit the Hostels and inspect the
rooms any time.
Jawaharlal Nehru Technological University Kakinada
For Constituent Colleges and Affiliated Colleges of JNTUK
In Case of Emergency CALL TOLL FREE NO. : 1800 - 425 - 1288
LET US MAKE JNTUK A RAGGING FREE UNIVERSITY

Machine Design
19
DEPARTMENT OF MECHANICAL ENGINEERING
M.Tech Specialization: MACHINE DESIGN
I SEMESTER
S.NO SUBJECT
L
P
C
1
COMPUTATIONAL METHODS IN ENGINEERING
4
0
3
2
ADVANCED MECHANICS OF SOLIDS
4
0
3
3
ADVANCED MECHANISMS
4
0
3
4
MECHANICAL VIBRATIONS
4
0
3
5
DESIGN WITH ADVANCED MATERIALS
4
0
3
6
ELECTIVE ? I
DESIGN OF AUTOMOBILE SYSTEMS
4
0
3
PRODUCT DESIGN
GEOMETRIC MODELLING
NON DESTRUCTIVE EVALUATION
7
MACHINE DYNAMICS LAB
0
4
2
TOTAL
20
II SEMESTER
1
OPTIMIZATION AND RELIABILITY
4
0
3
2
EXPERIMENTAL STRESS ANALYSIS
4
0
3
3
FINITE ELEMENT METHOD
4
0
3
4
ELECTIVE ? II
4
0
3
FRACTURE MECHANICS
GEAR ENGINEERING
DESIGN FOR MANUFACTURING
CONTINUUM MECHANICS
5
ELECTIVE - III
4
0
3
TRIBOLOGY
SIGNAL ANALYSIS AND CONDITION MONITORING
COMPUTATIONAL FLUID DYNAMICS
DESIGN SYNTHESIS
6
ELECTIVE-IV
4
0
3
PRESSURE VESSEL DESIGN

20
2013-14
MECHANICS OF COMPOSITE MATERIALS
MECHATRONICS
THEORY OF PLASTICITY
7
DESIGN PRACTICE LAB
0
6
4
TOTAL
22
III SEMESTER
S.NO. SUBJECT
L
T
P
CREDITS
1
SEMINAR - I
0
0
3
2
2
COMPREHENSIVE VIVA VOCE
2
3
PROJECT - PART I
14
TOTAL
18
IV SEMESTER
S.NO. SUBJECT
L
T
P
CREDITS
1
SEMINAR -II
0
0
3
2
2
PROJECT PART II & VIVA VOCE
18
TOTAL
20

Machine Design
21
SYLLABUS
I ? I
L
P
Credits
4
-
3
COMPUTATIONAL METHODS IN
ENGINEERING
UNIT ? I
Introduction to numerical methods applied to engineering problems:
Examples, solving sets of equations ? Matrix notation ? Determinants
and inversion ? Iterative methods ? Relaxation methods ? System of
non-linear equations. Least square approximation, fitting of non-linear
curves by least squares ?regression analysis- multiple linear regression,
non linear regression - computer programs.
UNIT ? II
Boundry value problems and charecteristic value problems: Shooting
method ? Solution through a set of equations ? Derivative boundary
conditions ? Rayleigh ? Ritz method ? Characteristic value problems.
UNIT ? III
Transformation Techniques: Continuous fourier series, frequency
and time domains, laplace transform, fourier integral and transform,
discrete fourier transform (DFT), Fast fourier transform (FFT).
UNIT ? IV
Numerical solutions of partial differential equations: Laplace's
equations ? Representations as a difference equation ? Iterative
methods for Laplace's equations ? poisson equation ? Examples ?
Derivative boundary conditions ? Irregular and non ? rectangular grids
? Matrix patterns, sparseness ? ADI method ? Finite element method.
UNIT ? V
Partial differential equations: Explicit method ? Crank-Nickelson
method ? Derivative boundary condition ? Stability and convergence
criteria. Solving wave equation by finite differences-stability of
numerical method ?method of characteristics-wave equation in two
space dimensions-computer programs.

22
2013-14
TEXT BOOKS:
1.
Steven C.Chapra, Raymond P.Canale "Numerical Methods for
Engineers" Tata Mc-Graw Hill
2.
Curtis F.Gerald, Partick.O.Wheatly,"Applied numerical
analysis"Addison-Wesley,1989
3.
Douglas J.Faires,Riched Burden"Numerical methods", Brooks/Cole
publishing company,1998.Second edition.
REFERENCES:
1.
Ward Cheney and David Kincaid "Numerical mathematics and
computing" Brooks/Cole publishing company1999, Fourth edition.
2.
Riley K.F,. M.P.Hobson and Bence S.J,"Mathematical methods for
physics and engineering", Cambridge University press,1999.
3.
Kreysis, Advanced Mathematics

Machine Design
23
I ? I
L
P
Credits
4
-
3
ADVANCED MECHANICS OF SOLIDS
UNIT -I
Theories of stress and strain, Definition of stress at a point, stress
notation, principal stresses, other properties, differential equations of
motion of a deformable body, deformation of a deformable body, strain
theory, principal strains, strain of a volume element, small displacement
theory.
Stress ?strain temperature relations: Elastic and non elastic response
of a solid, first law of thermodynamics, Hooke's Law, Anisotropic
elasticity, Hooke's Law, Isotropic elasticity, initiation of Yield, Yield
criteria.
UNIT- II
Failure criteria: Modes of failure, Failure criteria, Excessive deflections,
Yield initiation, fracture, Progressive fracture, (High Cycle fatigue for
number of cycles N > 106), buckling.
Application of energy methods: Elastic deflections and statically
indeterminate members and structures: Principle of stationary potential
energy, Castigliono's theorem on deflections, Castigliono's theorem
on deflections for linear load deflection relations, deflections of statically
determinate structures.
UNIT- III
Unsymmetrical bending: Bending stresses in Beams subjected to
Nonsymmetrical bending; Deflection of straight beams due to
nonsymmetrical bending.
Curved beam theory: Winkler Bach formula for circumferential stress ?
Limitations ? Correction factors ?Radial stress in curved beams ? closed
ring subjected to concentrated and uniform loads-stresses in chain
links.

24
2013-14
UNIT -IV
Torsion : Linear elastic solution; Prandtl elastic membrane (Soap-Film)
Analogy; Narrow rectangular cross Section ;Hollow thin wall torsion
members , multiple connected Cross Sections.
UNIT- V
Contact stresses: Introduction; problem of determining contact
stresses; Assumptions on which a solution for contact stresses is
based; Expressions for principal stresses; Method of computing contact
stresses; Deflection of bodies in point contact; Stresses for two bodies
in contact over narrow rectangular area (Line contact), Loads normal
to area; Stresses for two bodies in line contact, Normal and Tangent to
contact area.
TEXTBOOKS:
1.
Advanced Mechanics of materials by Boresi & Sidebottom-Wiely
International.
2.
Theory of elasticity by Timoschenko S.P. and Goodier J.N. McGraw-
Hill Publishers 3rd Edition
3.
Advanced Mechanics of Solids, L.S Srinath
REFERENCES:
1.
Advanced strength of materials by Den Hortog J.P.
2.
Theory of plates ? Timoshenko.
3.
Strength of materials & Theory of structures (Vol I & II) by B.C Punmia
4.
Strength of materials by Sadhu singh

Machine Design
25
I ? I
L
P
Credits
4
-
3
ADVANCED MECHANISMS
UNIT ?I
Introduction: Elements of Mechanisms; Mobility Criterion for Planar
mechanisms and manipulators; Mobility Criterion for spatial mechanisms
and manipulators. Spherical mechanisms-spherical trigonometry.
UNIT ? II
Advanced Kinematics of plane motion- I: The Inflection circle ; Euler ?
Savary Equation; Analytical and graphical determination of d ;i
Bobillier's Construction ;Collineastion axis ; Hartmann's Construction;
Inflection circle for the relative motion of two moving planes; Application
of the Inflection circle to kinematic analysis.
Advanced Kinematics of plane motion - II: Polode curvature; Hall's
Equation; Polode curvature in the four bar mechanism; coupler motion;
Relative motion of the output and input links; Determination of the
output angular acceleration and its Rate of change; Freudenstein's
collineation ?axis theorem; Carter ?Hall circle; The circling ? point
curve for the Coupler of a four bar mechanism.
UNIT ? III
Introduction to Synthesis-Graphical Methods - I: The Four bar linkage;
Guiding a body through Two distinct positions; Guiding a body
through Three distinct positions; The Rotocenter triangle ; Guiding a
body through Four distinct positions; Burmester's curve.
Introduction to Synthesis-Graphical Methods - II: Function generation-
General discussion; Function generation: Relative ?rotocenter method,
Overlay's method, Function generation- Velocity ? pole method; Path
generation: Hrones's and Nelson's motion Atlas, Roberts's theorem.
UNIT ? IV
Introduction to Synthesis - Analytical Methods: Function Generation:
Freudenstien's equation, Precision point approximation, Precision ?
derivative approximation; Path Generation: Synthesis of Four-bar

26
2013-14
Mechanisms for specified instantaneous condition; Method of
components; Synthesis of Four-bar Mechanisms for prescribed extreme
values of the angular velocity of driven link; Method of components.
UNIT ? V
Manipulator kinematics : D-H transformation matrix ; Direct and Inverse
kinematic analysis of Serial manipulators: Articulated ,spherical &
industrial robot manipulators- PUMA, SCARA, STANFORD ARM,
MICROBOT.
TEXT BOOKS:
1.
Jeremy Hirschhorn, Kinematics and Dynamics of plane
mechanisms,McGraw-Hill,1962.
2.
L.Sciavicco and B.Siciliano, Modelling and control of Robot
manipulators, Second edition, Springer -Verlag,London,2000.
3.
Amitabh Ghosh and Ashok Kumar Mallik, Theory of Mechanisms and
Machines. E.W.P.Publishers.
REFERENCE BOOKS:
1.
Allen S.Hall Jr., Kinematics and Linkage Design, PHI,1964.
2.
J.E Shigley and J.J . Uicker Jr., Theory of Machines and Mechanisms ,
McGraw-Hill, 1995.
3.
Joseph Duffy, Analysis of mechanisms and Robot manipulators, Edward
Arnold,1980

Machine Design
27
I ? I
L
P
Credits
4
-
3
MECHANICAL VIBRATIONS
UNIT I
Single degree of Freedom systems: Undamped and damped free
vibrations, forced vibrations ; coulomb damping; Response to harmonic
excitation; rotating unbalance and support excitation, Vibration isolation
and transmissibility, Response to Non Periodic Excitations, unit Impulse,
unit step and unit Ramp functions; response to arbitrary excitations,
The Convolution Integral; shock spectrum; System response by the
Laplace Transformation method.
UNIT- II
Multi degree freedom systems: Principal modes ? undamped and
damped free and forced vibrations ; undamped vibration absorbers,
Matrix formulation, stiffness and flexibility influence coefficients; Eigen
value problem; normal modes and their properties; Free and forced
vibration by Modal analysis; Method of matrix iteration; Torsional
vibrations of multi ? rotor systems and geared systems; Discrete-Time
systems.
UNIT- III
Numerical Methods: Rayliegh's, stodola's, Matrix iteration, Rayleigh-
Ritz Method and Holzer's methods
UNIT- IV
Experimental Methods: Vibrometers, velocity meters & accelerometers
UNIT V
Application of concepts: Free vibration of strings ? longitudinal
oscillations of bars-transverse vibrations of beams- Torsional vibrations
of shafts, Critical speeds without and with damping, secondary critical
speed.

28
2013-14
TEXT BOOKS:
1.
Elements of Vibration Analysis by Meirovitch.
2.
Mechanical Vibrations by G.K. Groover.
REFERENCES:
1.
Vibrations by W.T. Thomson
2.
Mechanical Vibrations ? Schaum series.
3.
Vibration problems in Engineering by S.P. Timoshenko.
4.
Mechanical Viabrations ? V.Ram Murthy.

Machine Design
29
I ? I
L
P
Credits
4
-
3
DESIGN WITH ADVANCED MATERIALS
UNIT ? I
Fundamentals of material science: Elasticity in metals and polymers,
mechanism of plastic deformation, role of dislocations, yield stress,
shear strength of perfect and real crystals, strengthening mechanism,
work hardening, solid solution, grain boundary strengthening.
Poly phase mixture, precipitation, particle, fiber and dispersion
strengthening, effect of temperature, strain and strain rate on plastic
behavior, super plasticity, deformation of non crystalline material.
UNIT ? II
Motivation of selection, cost basis and service requirements, selection
for mechanical properties, strength, toughness, fatigue and creep, use
of material property charts for material selection.
UNIT ? III
Modern metallic Materials: Dual phase steels, micro alloyed, high
strength low alloy (HSLA) Steel, maraging steel, intermetalics, Ni and
Ti aluminides, super alloys.
UNIT ? IV
Non metallic materials: Polymeric materials and their molecular
structures, production techniques for fibers, foams, adhesives and
coatings, structure, properties and applications of engineering
polymers. composites; Introduction, reinforcement, types of composite
materials, - properties, processing and application of composite
materials.
UNIT ? V
Smart materials, shape memory alloys, metallic glass, quasi crystal and
nano crystalline materials.
TEXT BOOKS:
1.
Mechanical behavior of materials/Thomas H.Courtney/2nd Edition,
McGraw-Hill, 2000
2.
Mechanical Metallurgy/George E.Dieter/McGraw Hill, 1998
3.
Material selction in mechanical design by M.F Ashby. Bott
REFERENCES:
1.
Selection and use of Engineering Materials 3e/Charles J.A/Butterworth
Heiremann.

30
2013-14
I ? I
L
P
Credits
4
-
3
(ELECTIVE -I)
DESIGN OF AUTOMOBILE SYSTEMS
UNIT -I
Conceptual design of automobiles: body shape definition based on
aerodynamic structure safety, sub - systems integration considerations,
road load analysis, transmission of road loads to structure.
UNTI- II
Detail design of structural elements, load analysis for different vehicles,
safety consideration, design for bending, torsion conditions, criteria
for toppling, based on cornering loads.
UNIT- III
Suspension system integration with vehicle for ride comfort, methods
of mounting suspension and power train systems.
UNIT- IV
Driver cabin/seat design, design of control systems based on
ergonomics, anthropometry, human factors engineering considerations.
UNIT- V
Safety aspects of automobiles, devices, energy absorbing systems,
crash worthiness, legislation relating to safety, vehicle performance
requirements, sub systems packaging and verification of vehicle
performance through testing(lab, field testing).
TEXT BOOKS
1.
Donald E.Males, Fundamentals of automobile body structure design(R-
394), SAE2011
2.
W.F.Milliker,D.L.Milliker,Maurice Olly, Chassis design: principles and
analysis(R-206)SAE2002
3.
J.H Smith, Modern Vehicle System Design

Machine Design
31
I ? I
L
P
Credits
4
-
3
(ELECTIVE -I)
PRODUCT DESIGN
UNIT - I
Product Design Process: Design Process Steps, Morphology of
Design, Problem Solving and Decision Making: Problem-Solving
Process, Creative Problem Solving, Invention, Brainstorming,
Morphological Analysis, Behavioral Aspects of Decision Making,
Decision Theory, Decision Matrix, Decision Trees.
Modeling and Simulation: Triz, Role of Models in Engineering Design,
Mathematical Modeling, Similitude and Scale Models, Computer
Simulation, Geometric Modeling on Computer, Finite-Element Analysis.
UNIT- II
Product management:
The operation of product management: Customer focus of product
management , product planning process, Levels of strategic planning,
Wedge analysis, Opportunity search, Product life cycle, Life cycle
theory and practice.
Product development: Managing new products, Generating ideas,
Sources of product innovation, Selecting the best ideas, The political
dimension of product design, Managing the product launch and
customer feedback.
Product managers and manufacturing: The need for effective
relationships, The impact of manufacturing processes on product
decisions, Prototype planning,, Productivity potentials, Management
of product quality, Customer service levels.
UNIT- III
Risk and Reliability: Risk and Society, Hazard Analysis, Fault Tree
Analysis.
Failure Analysis and Quality: Causes of Failures, Failure Modes, Failure

32
2013-14
Mode and Effect Analysis, FMEA Procedure, Classification of Severity,
Computation of Criticality Index, Determination of Corrective Action,
Sources of Information, Copyright and Copying, Patent Literature.
UNIT- IV
Product Testing; thermal, vibration, electrical, and combined
environments, temperature testing, vibration testing, test effectiveness.
Accelerated testing and data analysis, accelerated factors. Weibull
probability plotting, testing with censored data .
UNIT- V
Design For Maintainability: Maintenance Concepts and Procedures,
Component Reliability, Maintainability and Availability, Fault Isolation
in design and Self-Diagnostics.
Product Design for Safety, Product Safety and User Safety Concepts,
Examples of Safe Designs.
Design Standardization and Cost Reduction: Standardization
Methodology, Benefits of Product Standardization; International,
National, Association and Company Level Standards; Parts
Modularization
TEXT BOOKS
1
Engineering Design , George E. Dieter, McGRAW-HILL
2.
Product Integrity and Reliability in Design, John W. Evans and Jillian
Y. Evans, Springer Verlag
3.
The Product Management Handbook, Richard S. Handscombe,
McGRAW-HILL
4.
New Product Design, Ulrich Eppinger
5.
Product Design, Kevin Otto.

Machine Design
33
I ? I
L
P
Credits
4
-
3
(ELECTIVE -I)
GEOMETRIC MODELING
UNIT - I
Introduction: Definition, Explicit and implicit equations, parametric
equations.
UNIT - II
Cubic Splines-1: Algebraic and geometric form of cubic spline, tangent
vectors, parametric space of a curve, blending functions, four point
form, reparametrization, truncating and subdividing of curves. Graphic
construction and interpretation, composite pc curves.
UNIT - III
Bezier Curves: Bernstein basis, equations of Bezier curves, properties,
derivatives.
B-Spline Curves: B-Spline basis, equations, knot vectors, properties
and derivatives.
UNIT ? IV
Surfaces: Bicubic surfaces, Coon's surfaces, Bezier surfaces, B-Spline
surfaces, surfaces of revolutions, Sweep surfaces, ruled surfaces,
tabulated cylinder, bilinear surfaces, Gaussian curvature.
UNIT ? V
Solids: Tricubic solid, Algebraic and geometric form.
Solid modeling concepts: Wire frames, Boundary representation, Half
space modeling, spatial cell, cell decomposition, classification problem.
TEXT BOOKS:
1.
CAD/CAM by Ibrahim Zeid, Tata McGraw Hill.
2.
Elements of Computer Graphics by Roger & Adams Tata McGraw Hill.
REFERENCES:
1.
Geometric Modeling by Micheal E. Mortenson, McGraw Hill Publishers
2.
Computer Aided Design and Manufacturing, K.Lalit Narayan,
K.Mallikarjuna Rao, MMM Sarcar, PHI Publishers

34
2013-14
I ? I
L
P
Credits
4
-
3
(ELECTIVE I)
NON - DESTRUCTIVE EVALUATION
UNIT ? I
General Methods: Flaw Detection Using Dye Penetrants. Magnetic
Particle Inspection, introduction to electrical impedance, Principles of
Eddy Current testing, Flaw detection using eddy currents.
UNIT ? II
X-Ray Radiography: The Radiographic process, X-Ray and Gamma-
ray sources, Geometric Principles, Factors Governing Exposure, Radio
graphic screens, Scattered radiation, Arithmetic of exposure,
Radiographic image quality and detail visibility, Industrial X-Ray films,
Fundamentals of processing techniques, Process control, The
processing Room, Special Processing techniques, Paper Radiography,
Sensitometric characteristics of x-ray films, Film graininess signal to
noise ratio in radiographs, The photographic latent image, Radiation
Protection.
UNIT ? III
Generation of ultrasonic waves, Horizontal and shear waves, Near field
and far field acoustic wave description, Ultrasonic probes- straight
beam, direct contact type, Angle beam, Transmission/reflection type,
and delay line transducers, acoustic coupling and media, Transmission
and pulse echo methods, A-scan, B-scan, C-scan, F-scan and P-scan
modes, Flaw sizing in ultrasonic inspection: AVG, Amplitude,
Transmission, TOFD, Satellite pulse, Multi-modal transducer, Zonal
method using focused beam. Flow location methods, Signal processing
in Ultrasonic NDT; Mimics, spurious echos and noise. Ultrasonic
flaw evaluation.
UNIT ? IV
Holography: Principles and practices of Optical holography, acoustical,
microwave, x-ray and electron beam holography techniques.

Machine Design
35
UNIT ? V
Applications: NDT in flaw analysis of Pressure vessels, piping, NDT
in Castings, Welded constructions, etc., Case studies.
TEXT BOOKS:
1.
Ultrasonic testing by Krautkramer and Krautkramer
2.
Ultrasonic inspection 2 Training for NDT : E. A. Gingel, Prometheus
Press,
3.
ASTM Standards, Vol 3.01, Metals and alloys

36
2013-14
I ? I
L
P
Credits
-
4
2
MACHINE DYNAMICS LABORATORY
EXPERIMENTS:
1.
Determination of damped natural frequency of vibration of the vibrating
system with different viscous oils
2.
Determination of steady state amplitude of a forced vibratory system
3.
Static balancing using steel balls
4.
Determination of the magnitude and orientation of the balancing mass
in dynamic balancing
5.
Field balancing of the thin rotors using vibration pickups.
6.
Determination of the magnitude of gyroscopic couple, angular velocity
of precession, and representation of vectors.
7.
Determination of natural frequency of given structure using FFT
analyzer
8.
Diagnosis of a machine using FFT analyzer.
9.
Direct kinematic analysis of a robot
10.
Inverse kinematic analysis of a robot
11.
An experiment on friction, wear, pin-on-disc
12.
An experiment on stress intensity factors / fatigue, fracture
13.
Modal analysis of beams and plates

Machine Design
37
I ? II
L
P
Credits
4
-
3
(ELECTIVE ? IV)
OPTIMIZATION AND RELIABILITY
UNIT - I
CLASSICAL OPTIMIZATION TECHNIQUES: Single variable
optimization with and without constraints, multi ? variable optimization
without constraints, multi ? variable optimization with constraints ?
method of Lagrange multipliers, Kuhn-Tucker conditions.
UNIT - II
NUMERICAL METHODS FOR OPTIMIZATION: Nelder Mead's
Simplex search method, Gradient of a function, Steepest descent
method, Newton's method, types of penalty methods for handling
constraints.
UNIT - III
GENETIC ALGORITHM (GA) : Differences and similarities between
conventional and evolutionary algorithms, working principle,
reproduction, crossover, mutation, termination criteria, different
reproduction and crossover operators, GA for constrained optimization,
draw backs of GA,
GENETIC PROGRAMMING (GP): Principles of genetic programming,
terminal sets, functional sets, differences between GA & GP, random
population generation, solving differential equations using GP.
MULTI-OBJECTIVE GA: Pareto's analysis, Non-dominated front, multi
? objective GA, Non-dominated sorted GA, convergence criterion,
applications of multi-objective problems .
UNIT ? IV
APPLICATIONS OF OPTIMIZATION IN DESIGN AND
MANUFACTURING SYSTEMS:
Some typical applications like
optimization of path synthesis of a four-bar mechanism, minimization
of weight of a cantilever beam, optimization of springs and gears, general
optimization model of a machining process, optimization of arc welding

38
2013-14
parameters, and general procedure in optimizing machining operations
sequence.
UNIT V
RELIABILITY: Concepts of Engineering Statistics, risk and reliability,
probabilistic approach to design, reliability theory, design for reliability,
hazard analysis.
TEXT BOOKS:
1.
Optimization for Engineering Design ? Kalyanmoy Deb, PHI Publishers
2.
Engineering Optimization ? S.S.Rao, New Age Publishers
REFERENCES:
1.
Genetic algorithms in Search, Optimization, and Machine learning ?
D.E.Goldberg, Addison-Wesley Publishers
2.
Multi objective Genetic algorithms - Kalyanmoy Deb, PHI Publishers
3.
Optimal design ? Jasbir Arora, Mc Graw Hill (International) Publishers
4.
An Introduction to Reliability and Maintainability Engineering by CE
Ebeling, Waveland Printers Inc., 2009
5.
Reliability Theory and Practice by I Bazovsky, Dover Publications,
2013

Machine Design
39
I ? II
L
P
Credits
4
-
3
EXPERIMENTAL STRESS ANALYSIS
UNIT ? I
Introduction: Stress, strain, Plane stress and plane strain conditions,
Compatibility conditions. Problems using plane stress and plane strain
conditions, stress functions, mohrs circle for stress strain, Three-
dimensional stress strain relations.
UNIT ? II
Strain Measurement and Recordings: Various types of strain gauges,
Electrical Resistance strain gauges, semiconductor strain gauges, strain
gauge circuits. Introduction, static recording and data logging, dynamic
recording at very low frequencies, dynamic recording at intermediate
frequencies, dynamic recording at high frequencies, dynamic recording
at very high frequencies, telemetry systems.
UNIT ? III
Photo elasticity: Photo elasticity ? Polariscope ? Plane and circularly
polarized light, Bright and dark field setups, Photo elastic materials ?
Isochromatic fringes ? Isoclinics
Three dimensional Photo elasticity : Introduction, locking in model
deformation, materials for three-dimensional photo elasticity, machining
cementing and slicing three-dimensional models, slicing the model and
interpretation of the resulting fringe patterns, effective stresses, the
shear-difference method in three dimensions, applications of the Frozen-
stress method, the scattered-light method.
UNIT ? IV
Brittle coatings: Introduction, coating stresses, failure theories, brittle
coating crack patterns, crack detection, ceramic based brittle coatings,
resin based brittle coatings, test procedures for brittle coatings analysis,
calibration procedures, analysis of brittle coating data.
Moire Methods: Introduction, mechanism of formation of Moire fringes,
the geometrical approach to Moire-Fringe analysis, the displacement

40
2013-14
field approach to Moire-Fringe analysis, out of plane displacement
measurements, out of plane slope measurements, sharpening and
multiplication of Moire-Fringes, experimental procedure and techniques.
UNIT ? V
Birefringent Coatings
Introduction, Coating stresses and strains, coating sensitivity, coating
materials, application of coatings, effects of coating thickness, Fringe-
order determinations in coatings, stress separation methods.
TEXT BOOKS :
1.
Theory of Elasticity by Timoshenke and Goodier Jr
2.
Experimental stress analysis by Dally and Riley,Mc Graw-Hill
REFERENCES:
1.
A treatise on Mathematical theory of Elasticity by LOVE .A.H
2.
Photo Elasticity by Frocht
3.
Experimental stress analysis, Video course by K.Ramesh / NPTEL

Machine Design
41
I ? II
L
P
Credits
4
-
3
FINITE ELEMENT METHOD
UNIT - I
Formulation Techniques: Methodology, Engineering problems and
governing differential equations, finite elements., Variational methods-
potential energy method, Raleigh Ritz method, strong and weak forms,
Galerkin and weighted residual methods, calculus of variations,
Essential and natural boundary conditions.
UNIT ? II
One-dimensional elements: Bar, trusses, beams and frames,
displacements, stresses and temperature effects.
UNIT ? III
Two dimensional problems: CST, LST, four noded and eight noded
rectangular elements, Lagrange basis for triangles and rectangles,
serendipity interpolation functions. Axisymmetric Problems:
Axisymmetric formulations, Element matrices, boundary conditions.
Heat Transfer problems: Conduction and convection, examples: - two-
dimensional fin.
UNIT ? IV
Isoparametric formulation: Concepts, sub parametric, super parametric
elements, numerical integration, Requirements for convergence, h-
refinement and p-refinement, complete and incomplete interpolation
functions, pascal's triangle, Patch test.
UNIT ? V
Finite elements in Structural Analysis: Static and dynamic analysis,
eigen value problems, and their solution methods, case studies using
commercial finite element packages.
TEXT BOOK:
1.
Finite element methods by Chandrubatla & Belagondu.
REFERENCES:
1.
J.N. Reddy, Finite element method in Heat transfer and fluid dynamics,
CRC press, 1994
2.
Zienckiwicz O.C. & R. L. Taylor, Finite Element Method, McGraw-
Hill,1983.
3.
K. J. Bathe, Finite element procedures, Prentice-Hall, 1996

42
2013-14
I ? II
L
P
Credits
4
-
3
(ELECTIVE II)
FRACTURE MECHANICS
UNIT-I
Introduction: Prediction of mechanical failure. Macroscopic failure
modes; brittle and ductile behaviour. Fracture in brittle and ductile
materials ? characteristics of fracture surfaces; inter-granular and intra-
granular failure, cleavage and micro-ductility, growth of fatigue cracks,
The ductile/brittle fracture transition temperature for notched and
unnotched components. Fracture at elevated temperature.
UNIT-II
Griffiths analysis: Concept of energy release rate, G, and fracture
energy, R. Modification for ductile materials, loading conditions.
Concept of R curves.
Linear Elastic Fracture Mechanics, (LEFM). Three loading modes
and the state of stress ahead of the crack tip, stress concentration
factor, stress intensity factor and the material parameter the critical
stress intensity factor, crack tip plasticity, effect of thickness on fracture
toughness.
UNIT-III
Elastic-Plastic Fracture Mechanics; (EPFM). The definition of
alternative failure prediction parameters, Crack Tip Opening
Displacement, and the J integral. Measurement of parameters and
examples of use.
UNIT-IV
Fatigue: definition of terms used to describe fatigue cycles, High Cycle
Fatigue, Low Cycle Fatigue, mean stress R ratio, strain and load control.
S-N curves. Goodmans rule and Miners rule. Micromechanisms of
fatigue damage, fatigue limits and initiation and propagation control,
leading to a consideration of factors enhancing fatigue resistance.
Total life and damage tolerant approaches to life prediction.

Machine Design
43
UNIT-V
Creep deformation: the evolution of creep damage, primary, secondary
and tertiary creep. Micro-mechanisms of creep in materials and the role
of diffusion. Ashby creep deformation maps. Stress dependence of
creep ? power law dependence. Comparison of creep performance under
different conditions ? extrapolation and the use of Larson-Miller
parameters. Creep-fatigue interactions. Examples.
TEXT BOOKS
1.
T.L. Anderson, Fracture Mechanics Fundamentals and Applications,
2nd Ed. CRC press, (1995)
2.
B. Lawn, Fracture of Brittle Solids, Cambridge Solid State Science Series
2nd ed1993.
3.
J.F. Knott, Fundamentals of Fracture Mechanics, Butterworths (1973)
4.
J.F. Knott, P Withey, Worked examples in Fracture Mechanics, Institute
of Materials.
5.
H.L.Ewald and R.J.H. Wanhill Fracture Mechanics, Edward Arnold,
(1984).
6.
S. Suresh, Fatigue of Materials, Cambridge University Press, (1998)
7.
L.B. Freund and S. Suresh, Thin Film Materials Cambridge University
Press,(2003).
8.
G. E. Dieter, Mechanical Metallurgy, McGraw Hill, (1988)
9.
D.C. Stouffer and L.T. Dame, Inelastic Deformation of Metals, Wiley
(1996)
10.
F.R.N. Nabarro, H.L. deVilliers, The Physics of Creep, Taylor and Francis,
(1995)

44
2013-14
I ? II
L
P
Credits
4
-
3
(ELECTIVE II)
GEAR ENGINEERING
(PSG Design data Book is allowed)
UNIT ? I
Introduction: Principles of gear tooth action, Generation of Cycloid
and Involute gears, Involutometry, gear manufacturing processes and
inspection, gear tooth failure modes, stresses, selection of right kind
of gears.
UNIT ? II
Spur Gears, Helical gears, Bevel gears and worm gears, Tooth loads,
Principles of Geometry, Design considerations and methodology,
Complete design of spur gear teeth considering Lewis beam strength,
Buckingham's dynamic load and wear load, Design of gear shaft and
bearings.
UNIT ?III
Gear trains: Simple, compound and epicyclic gear trains, Ray diagrams,
Design of a gear box of an automobile, Design of gear trains from the
propeller shafts of airplanes for auxiliary systems.
UNIT ? IV
Gear failures
Analysis of gear tooth failures, Nomenclature of geartooth wear and
failure, tooth breakage, pitting, scoring, wear, overloading,gear-casing
problems, lubrication failures
UNIT ? V
Optimal Gear design: Optimization of gear design parameters, Weight
minimization, Constraints in gear train design-space, interference,
strength, dynamic considerations, rigidity etc. Compact design of gear
trains, multi objective optimization of gear trains. Application of
Traditional and non-traditional optimization techniques

Machine Design
45
TEXT BOOKS:
1.
Maleev and Hartman, Machine Design, C.B.S. Publishers, India.
2.
Henry E.Merrit,Gear engineering ,Wheeler publishing,Allahabad,1992.
3.
Practical Gear design by Darle W. Dudley, McGraw-Hill book company
REFERENCES:
1.
Earle Buckingham, Analytical mechanics of gears, Dover publications,
New York, 1949.
2.
G.M.Maitha, Hand book of gear design, Tata Mc.Graw Hill publishing
company Ltd., New Delhi,1994.

46
2013-14
I ? II
L
P
Credits
4
-
3
(ELECTIVE II)
DESIGN FOR MANUFACTURING
UNIT - I
Introduction: Design philosophy-steps in design process-general
design rules for manufacturability-basic principles of designing for
economical production-creativity in design.
UNIT - II
Machining processes: Overview of various machining processes-
general design rules for machining-dimensional tolerance and surface
roughness-Design for machining ? ease ?redesigning of components
for machining ease with suitable examples. General design
recommendations for machined parts.
UNIT - III
Metal casting: Appraisal of various casting processes, selection of
casting process,-general design considerations for casting-casting
tolerance-use of solidification, simulation in casting design-product
design rules for sand casting.
UNIT - IV
Metal joining: Appraisal of various welding processes, factors in design
of weldments ? general design guidelines-pre and post treatment of
welds-effects of thermal stresses in weld joints-design of brazed joints.
Forging: Design factors for forging ? closed die forging design ? parting
lines of dies?drop forging die design ? general design recommendations.
UNIT ? V
Extrusion & Sheet metal work: Design guide lines extruded sections-
design principles for punching, blanking, bending, deep drawing-Keeler
Goodman forging line diagram ? component design for blanking.
Plastics: Visco elastic and creep behavior in plastics-design guidelines
for plastic components-design considerations for injection moulding
? design guidelines for machining and joining of plastics.
TEXT BOOKS:
1.
Design for manufacture, John cobert, Adisson Wesley. 1995
2.
Design for Manufacture by Boothroyd,
3.
Design for manufacture, James Bralla
REFERENCE:
1.
ASM Hand book Vol.20

Machine Design
47
I ? II
L
P
Credits
4
-
3
ELECTIVE II
CONTINUUM MECHANICS
UNIT ? I
Tensor calculus: Tensor calculus, Multi linear forms, Definition of
Tensor over including vector spaces, Alternating tensors, determinants,
orientation, tensor products, kinematics of deformations and motion,
strain analysis, rotation of tensors, calculations of tensors, internal
calculations of tensors and integral identities.
UNIT ? II
Eulerian and Lagrangian description of a continuous, discrete systems,
continua, physical quantities and their derivatives. Rigid body motion,
Relation between continuum models and real materials.
UNIT ? III
Conservation laws in a continuum: Mass conservation in Lagrangen
and Eulerian frames, Conservation of momentum in Lagrangen and
Eulerian frames.
UNIT ? IV
Conservation in angular momentum in lagrengreen form. Conservation
of energy in in Lagrangen and Eulerian frames.Strain and
decomposition. Finite deformation, infinitesimal displacements
UNIT - V
Material frame indifference, Elastic Materials, Viscous fluids, linear
viscoelasticity, case studies for metals and polymers.
TEXT BOOK
1.
Continuous mechanics, George Backus, Samizdat Press, 1997
REFERENCES:
1.
Mechanics of Continua, A.C. Eringan, 1962
2.
Continuous Physics, Vol. 1, A.C. Eringan, 1967, Academic press
3.
Introduction to Continuous Mechanics, B.L.N. Kennett
4.
Quick introduction to Tensor analysis, R.Sharipov, 2004, Samizdat Press.
5.
Non-linear continuum mech-win, SEACAS theory manuals part
II,T.A.Laursen,S.W.Attaway and R.I.Zadoks

48
2013-14
I ? II
L
P
Credits
4
-
3
(ELECTIVE III)
TRIBOLOGY
UNIT ? I
Introduction: Nature of surfaces and contact-Surface topography-
friction and wear mechanisms, wear maps, effect of lubricants- methods
of fluid film formation.
Lubrication: Choice of lubricants, types of oil, Grease and solid
lubricants- additives- lubrication systems and their selection.
UNIT ? II
Selection of rolling element bearings: Nominal life, static and dynamic
capacity-Equivalent load, probabilities of survival- cubic mean load-
bearing mounting details, pre loading of bearings, conditioning
monitoring using shock pulse method.
UNIT ? III
Hydrostatic Bearings: Thrust bearings ? pad coefficients- restriction-
optimum film thickness-journal bearings ? design procedure ?Aerostatic
bearings; Thrust bearings and Journal bearings ? design procedure.
UNIT ? IV
Hydrodynamic bearings: Fundamentals of fluid formation ? Reynold's
equation; Hydrodynamic journal bearings ? Sommerfield number-
performance parameters ? optimum bearing with maximum load capacity
? Friction ? Heat generated and Heat dissipated. Hydrodynamic thrust
bearings; Raimondi and Boyd solution for hydrodynamic thrust
bearings- fixed tilting pads, single and multiple pad bearings-optimum
condition with largest minimum film thickness.
UNIT ? V
Seals: different type-mechanical seals, lip seals, packed glands, soft
piston seals, Mechanical piston rod packing, labyrinth seals and
throttling bushes, oil flinger rings and drain grooves ? selection of
mechanical seals.

Machine Design
49
Failure of Tribological components: Failure analysis of plain bearings,
rolling bearings, gears and seals, wear analysis using soap and
Ferrography.
Dry rubbing Bearings: porous metal bearings and oscillatory journal
bearings ? qualitative approach only.
TEXT BOOKS:
1.
Rowe WW& O' Dionoghue,"Hydrostatic and Hybrid bearing design "
Butterworths & Co.Publishers Ltd,1983.
2.
Collacott R.A," Mechanical Fault diagnosis and condition monitoring",
Chapman and Hall, London 1977.
3.
Bernard J.Hamrock, " Fundamentals of fluid film lubricant", Mc Graw-
Hill Co.,1994.
REFERENCES:
1.
Neale MJ, (Editor) " Tribology hand Book"Neumann Butterworths,
1975.
2.
Connor and Boyd JJO (Editors) " Standard hand book of lubrication
engineers " ASLE,Mc Graw Hill Book & Co.,1968
3.
Shigley J, E Charles," Mechanical Engineering Design", McGraw Hill
Co., 1989

50
2013-14
I ? II
L
P
Credits
4
-
3
(ELECTIVE III)
SIGNAL ANALYSIS AND CONDITION
MONITORING
UNIT-I
Introduction, Basic concepts. Fourier analysis. Bandwidth. Signal types.
Convolution.
Signal analysis: Filter response time. Detectors. Recorders. Analog
analyzer types.
UNIT-II
PRACTICAL ANALYSIS OF STATIONARY SIGNALS: Stepped filter
analysis. Swept filter analysis. High speed analysis. Real-time analysis.
UNIT-III
PRACTICAL ANALYSIS OF CONTINUOUS NON-STATIONARY
SIGNALS
: Choice of window type. Choice of window length. Choice
of incremental step. Practical details. Scaling of the results.
UNIT-IV
PRACTICAL ANALYSIS OF TRANSIENTS: Analysis as a periodic
signal. Analysis by repeated playback (constant bandwidth). Analysis
by repeated playback (variable bandwidth).
UNIT-V
CONDITION MONITORING IN REAL SYSTEMS: Diagnostic tools.
Condition monitoring of two stage compressor. Cement mill foundation.
I.D. fan. Sugar centrifugal. Cooling tower fan. Air separator. Preheater
fan. Field balancing of rotors. ISO standards on vibrations, active,
passive hybrid methods of condition monitoring
TEST BOOK:
1.
Condition Monitoring of Mechanical Systems / Kolacat.
REFERENCES:
1. Frequency Analysis /R.B.Randall.
2.
Mechanical Vibrations Practice with Basic Theory / V. Ramamurti/ Narosa
Publishing House.
3.
Theory of Machines and Mechanisms/ Amitabh Ghosh & AK Malik/
EWP

Machine Design
51
I ? II
L
P
Credits
4
-
3
(ELECTIVE III)
COMPUTATIONAL FLUID DYNAMICS
UNIT ? I
Introduction: Finite difference method, finite volume method, finite
element method, governing equations and boundary conditions,
Derivation of finite difference equations.
Solution methods: Solution methods of elliptical equations ? finite
difference formulations, interactive solution methods, direct method
with Gaussian elimination.
Parabolic equations-explicit schemes and Von Neumann stability
analysis, implicit schemes, alternating direction implicit schemes,
approximate factorization, fractional step methods, direct method with
tridiagonal matrix algorithm.
UNIT ? II
Hyperbolic equations: explicit schemes and Von Neumann stability
analysis, implicit schemes, multi step methods, nonlinear problems,
second order one-dimensional wave equations.
Burgers equations: Explicit and implicit schemes, Runge-Kutta method.
UNIT ? III
Formulations of incompressible viscous flows: Formulations of
incompressible viscous flows by finite difference methods, pressure
correction methods, vortex methods.
Treatment of compressible flows: potential equation, Eluer equations,
Navier-stokes system of equations, flowfield-dependent variation
methods, boundary conditions, example problems.
UNIT ? IV
Finite volume method: Finite volume method via finite difference method,
formulations for two and three-dimensional problems.

52
2013-14
UNIT ? V
Standard variational methods: Linear fluid flow problems, steady state
problems, Transient problems.
TEXT BOOK:
1.
Computational fluid dynamics, T. J.Chung, Cambridge University
press,2002.
REFERENCE:
1.
Text book of fluid dynamics, Frank Chorlton, CBS Publishers
&distributors, 1985.

Machine Design
53
I ? II
L
P
Credits
4
-
3
(ELECTIVE III)
DESIGN SYNTHESIS
UNIT ? I
Design process and methodologies of systematic design conceptual
design variants and evaluation; Standardization and its exploitation in
design.
UNIT ? II
Tolerance from process and function; interchangeability and selective
assembly; selection of fits for different design situations, surface finish,
Load transmission, load equalization light weight and rigid
constructions.
UNIT ? III
Design of cast forged sheet metal parts and welded constructions,
Machining considerations.
UNIT ? IV
Design for assembly and dismantling; Modular constructions erection,
operation inspection and maintenance considerations; Ergonomics
Design of accuracy; Location pins and registers, Machining in
assembly, adjustment, Backlash and Clearance adjustment.
UNIT ? V
Problems formulation for design optimization Example illustration the
various principles available design variants for some of the common
basic functional requirements.
TEXT BOOK:
1.
Engineering Design a material and processing approach/ George Dieter/
McGraw Hi8 ll international book company 1983
REFERENCES:
1.
Engineering Design a systematic approach/ G. Phal W. Beitz/ Springer/
3rd Edition
2.
Mechanical Design Theory Methodology/ Manjula B. Waldron and
Kenneth J. Waldron/ Springer Verlag New York 1996.

54
2013-14
I ? II
L
P
Credits
4
-
3
(ELECTIVE III)
PRESSURE VESSEL DESIGN
UNIT ? I
Introduction: Materials-shapes of Vessels-stresses in cylindrical,
spherical and arbitrary, shaped shells, Cylindrical Vessels subjected to
internal pressure, wind load, bending and torque for computation of
pressure vessels-conical and tetrahedral vessels.
UNIT ? II
Theory of thick cylinders: Shrink fit stresses in built up cylinders-
auto frettage of thick cylinders, Thermal stresses in Pressure Vessels.
UNIT ? III
Theory of rectangular plates: Pure bending-different edge conditions.
Theory circular plates: Simple supported and clamped ends subjected
to concentrated and uniformly distributed loads-stresses from local
loads, Design of dome bends, shell connections, flat heads and cone
openings.
UNIT ? IV
Discontinuity stresses in pressure vessels: Introduction, beam on an
elastic foundation, infinitely long beam, semi infinite beam, cylindrical
vessel under axially symmetrical loading, extent and significance of
load deformations on pressure vessels, discontinuity stresses in
vessels, stresses in a bimetallic joints, deformation and stresses in
flanges.
UNIT ? V
Pressure vessel materials and their environment: Introduction, ductile
material tensile tests, structure and strength of steel, Leuder's lines,
determination of stress patterns from plastic flow observations,
behaviour of steel beyond the yield point, effect of cold work or strain

Machine Design
55
hardening on the physical properties of pressure vessel steels, fracture
types in tension, toughness of materials, effect of neutron irradiation
of steels, fatigue of metals, fatigue crack growth, fatigue life prediction,
cumulative fatigue damage, stress theory of failure of vessels subject
to steady state and fatigue conditions.
TEXT BOOKS:
1.
Theory and design of modern Pressure Vessels by John F.Harvey, Van
nostrand reihold company, New York.
1.
Pressure Vessel Design and Analysis by Bickell, M.B.Ruizcs.
REFERENCES:
1.
Process Equipment design- Beowll & Yound Ett.
2.
Indian standard code for unfired Pressure vessels IS:2825.
3.
Pressure Vessel Design Hand Book, Henry H.Bednar, P.E.,
C.B.S.Publishers, New Delhi.
4.
Theory of plates and shells- Timoshenko & Noinosky.

56
2013-14
I ? II
L
P
Credits
4
-
3
(ELECTIVE IV)
MECHANICS OF COMPOSITE MATERIALS
UNIT-I
Introduction to Composites: Introduction, Classification, matrix
materials, reinforced matrix of composites
UNIT-II
Hooke's Law for a Two-Dimensional Angle Lamina, Engineering
Constants of an Angle Lamina, Invariant Form of Stiffness and
Compliance Matrices for an Angle Lamina Strength Failure Theories of
an Angle Lamina : Maximum Stress Failure Theory Strength Ratio,Failure
Envelopes,Maximum Strain Failure Theory ,Tsai?Hill Failure Theory,
Tsai?Wu Failure Theory, Comparison of Experimental Results with
Failure Theories. Hygrothermal Stresses and Strains in a Lamina:
Hygrothermal Stress?Strain Relationships for a Unidirectional Lamina,
Hygrothermal Stress?Strain Relationships for an Angle Lamina
UNIT-III
Macromechanical Analysis of a Lamina :Introduction ,Definitions:
Stress, Strain ,Elastic Moduli,Strain Energy. Hooke's Law for Different
Types of Materials, Hooke's Law for a Two-Dimensional Unidirectional
Lamina, Plane Stress Assumption, Reduction of Hooke's Law in Three
Dimensions to Two Dimensions, Relationship of Compliance and
Stiffness Matrix to Engineering Elastic Constants of a Lamina
UNIT-IV
Micromechanical Analysis of a Lamina :Introduction, Volume and Mass
Fractions, Density, and Void Content, Evaluation of the Four Elastic
Moduli, Strength of Materials Approach, Semi-Empirical Models
,Elasticity Approach, Elastic Moduli of Lamina with Transversely
Isotropic Fibers, Ultimate Strengths of a Unidirectional Lamina,
Coefficients of Thermal Expansion, Coefficients of Moisture Expansion
Macromechanical Analysis of Laminates: Introduction , Laminate
Code , Stress?Strain Relations for a Laminate, In-Plane and Flexural

Machine Design
57
Modulus of a Laminate , Hygrothermal Effects in a Laminate, Warpage
of Laminates,hybrid laminates
UNIT-V
Failure, Analysis, and Design of Laminates : Introduction , Special
Cases of Laminates, Failure Criterion for a Laminate, Design of a
Laminated Composite, static analysis of laminated plates
TEXT BOOKS:
1.
Engineering Mechanics of Composite Materials by Isaac and M Daniel,
Oxford University Press, 1994.
2.
B. D. Agarwal and L. J. Broutman, Analysis and performance of fibre
Composites, Wiley- Interscience, New York, 1980.
3.
Mechanics of Composite Materials, Second Edition (Mechanical
Engineering), By Autar K. Kaw, Publisher: CRC
REFERENCES:
1.
R. M. Jones, Mechanics of Composite Materials, Mc Graw Hill
Company, New York, 1975.
2.
L. R. Calcote, Analysis of Laminated Composite Structures, Van
Nostrand Rainfold, New York, 1969.

58
2013-14
I ? II
L
P
Credits
4
-
3
(ELECTIVE IV)
MECHATRONICS
UNIT ? I
Introduction: Definition of Mechatronics products, design
considerations and trade offs. Overview of Mechtronic products.
Intelligent machine Vs Automatic machine economic and social
justification.
Actuators and drive systems: Mechanical, Electrical, hydraulic drive
systems, Characteristics of mechanical, Electrical, Hydraulic and
pneumatic actuators and their limitations.
UNIT ? II
Motion Control: Control parameters and system objectives, Mechanical
Configurations, Popular control system configurations. S-curve, motor/
load inertia matching, design with linear slides.
Motion Control algorithms: Significance of feed forward control loops,
shortfalls, fundamentals concepts of adaptive and fuzzy ? control.
Fuzzy logic compensatory control of transformation and deformation
non- linearity's.
UNIT ? III
Sensor interfacing: Analog and digital sensors for motion
measurement, digital transducers, human-Machine and machine-
Machine inter facing devices and strategy.
Architecture of intelligent machines: Introduction to Microprocessor
and programmable logic controls and identification of systems. System
design classification, motion control aspects in design.
UNIT ? IV
Machine vision: Feature and pattern recognition methods, concepts
of perception and cognition in decision-making, basics of image
processing, binary and grey scale images, sharpening and smoothening
of images.

Machine Design
59
UNIT ? V
Micromechatronic Sytems: Micro sensors, micro actuators, smart
instrumentation, micro-fabrication methods ? lithography, etching,
micro-joing.
TEXT BOOKS:
1.
"Designing intelligent machines", open university, London.Michel
B.Histand and david G. Alciatore.
2.
Introduction to Mechatronics and Measurement systems, Tata Mc
Graw Hill.
3.
C.W.desilva, " Control sensors and actuators, Prentice Hall.

60
2013-14
I ? II
L
P
Credits
4
-
3
(ELECTIVE IV)
THEORY OF PLASTICITY
UNIT ? I
Introduction: Modeling Uniaxial behavior in plasticity. Index notation,
Cartesian tensors. Yield and failure criteria Stress, stress deviator
tensors. Invariants, principal, mean stresses. Elastic strain energy.
Mohr's representation of stress in 2 & 3 dimensions. Haigh-
Westergaard stress space. Equilibrium equations of a body. Yield criteria:
Tresca's, von Mises rules, Drucker-Prager criterion, anisotropic yield
criteria.
Strain at point: Cauchy's formulae for strains, principal strains, principal
shear strains, derivative strain tensor. Strain-displacement relationships.
Linear elastic stress strain relations, Generalized Hooke's law, nonlinear
elastic stress strain relations
UNIT ? II
Principle of virtual work and its rate forms: Drucker's stability
postulate, normality, convexity and uniqueness for an elastic solid.
Incremental stress strain relations.
Criteria for loading and unloading: Elastic and plastic strain increment
tensors, Plastic potential and flow rule associated with different Yield
criteria, Convexity, normality and uniqueness considerations for
elastic?plastic materials. Expansion of a thick walled cylinder.
UNIT ? III
Incremental stress strain relationships: Prandtl-Reuss material model.
J deformation theory, Drucker-Prager material, General Isotropic
2
materials.
Deformation theory of plasticity: Loading surface, Hardening rules.
Flow rule and Druckers stability postulate. Concept of effective stress
and effective strain, mixed hardening material. Problems.

Machine Design
61
UNIT ? IV
Finite element formulation for an elastic plastic matrix: Numerical
algorithms for solving non linear equations, Convergence criteria,
Numerical implementations of the elastic plastic incremental constitutive
relations
UNIT ? V
Bounding surface theory: Uniaxial and multiaxial loading anisotropic
material behaviour. Theroms of limit analysis : Statically admissible
stress field and kinematically admissible velocity field. Upper and lower
bound theorms, examples and problems.
TEXT BOOK:
1.
Theory of Elasticity by S.P. Timoshenko & J.K Goodier, MGH
REFERENCES:
1.
Plasticity for structural engineering W.F.Chen s and D.J.Han, Springer
verlag-1987.
2.
Mechanics of Materials ?II, Victor E. Saouma.
3.
Theory of plasticity, Sadhu Singh

62
2013-14
I ? II
L
P
Credits
-
6
4
DESIGN PRACTICE LABORATORY
I. Modeling
1.
Surface modeling
2.
Solid modeling
3.
Drafting
4.
Assembling
II. Structural Analysis using any FEA Package for different structures that
can be discretised with 1-D,2-D & 3-D elements
1.
Static Analysis
2.
Modal Analysis
3.
Harmonic Analysis
4.
Spectrum Analysis
5.
Buckling Analysis
6.
Analysis of Composites
7.
Fracture mechanics
III. Thermal Analysis using any FEA Package for different structures that
can be discretised with 1-D,2-D & 3-D elements
1.
Steady state thermal analysis
2.
Transient thermal analysis
IV. Transient analysis using any FEA Package for different structures that
can be discretised with 1-D,2-D & 3-D elements
V. Prudent Design ? a case study
REFERENCES :
User manuals of ANSYS package Version 9.0
I-DEAS Package Version 9.0

This post was last modified on 16 March 2021