Download GTU BE/B.Tech 2019 Winter 5th Sem New 2152301 Injection Molding Technologies Question Paper

Enrollment No._______
A Firstranker's choice . .
GUJARAT TECHNOLOGICAL UNIVERSITY

--- Content provided by‍ FirstRanker.com ---

BE - SEMESTER- V (New) EXAMINATION — WINTER 2019
Subject Code: 2152301 Date: 25/11/2019
Subject Name: Injection Molding Technologies
Time: 10:30 AM TO 01:00 PM Total Marks: 70
Instructions:

--- Content provided by⁠ FirstRanker.com ---

1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
MARKS
Q.1 (a) Define i) Injection Molding ii) Injection cycle iii) Nozzle 03

--- Content provided by⁠ FirstRanker.com ---

(b) Explain the startup and shutdown process of injection molding. 04
(c) State the advantages and disadvantages of injection molding. 07
Q.2 (a) Draw and label the parts of an injection molding machine. 03
(b) Compare the hydraulic & toggle system for clamping. 04
(c) Draw and label the parts of a standard screw and explain its 07

--- Content provided by‍ FirstRanker.com ---

terminologies.
OR
(c) List the types of injection machine and explain the single stage plunger 07
type machine.
Q.3 (a) What is nitriding? Why is it required for screw and barrel? 03

--- Content provided by‍ FirstRanker.com ---

(b) List the defects found in an injection molded product and give causes 04
and remedies for any two defects.
(c) Explain with a neat sketch the ring type non return valve. 07
OR
Q.3 (a) What is purging? When is it necessary in injection molding. 03

--- Content provided by‌ FirstRanker.com ---

(b) Draw a neat sketch of double toggle clamping mechanism. 04
(c) Explain the steps of a reciprocating screw type injection molding 07
machine.
Q.4 (a) What is MFI? How is it important in selecting a material for injection 03
molding.

--- Content provided by‍ FirstRanker.com ---

(b) Draw a PVT diagram and explain it briefly. 04
(c) Explain with a neat sketch, the process of melting of plastic in a screw. 07
OR
Q.4 (a) Explain the terms 1) Hold on pressure ii) Back pressure iii) Injection 03
shot capacity.

--- Content provided by‌ FirstRanker.com ---

(b) For a reciprocating screw type injection molding machine, list its 04
injection end specifications.
(c) List the types of nozzles and with a neat sketch explain the Standard 07
nozzle.
Q.5 (a) Compare hydraulic and electric drive for screw. 03

--- Content provided by‌ FirstRanker.com ---

(b) Which type of screw is used to process Nylon? Explain it with a neat 04
sketch.
(c) Write a short note on Gas Assisted Injection Molding process. 07
OR
Q.5 (a) Why is predrying of a material important before processing? Name the 03

--- Content provided by‍ FirstRanker.com ---

plastic materials which require predrying.
(b) Compare injection molding of thermoplastics with injection molding 04
of thermosets.
(c) List the functions of microprocessor in injection molding machine. 07
Explain open loop & closed loop control.

--- Content provided by⁠ FirstRanker.com ---

FirstRanker.com