Download GTU (Gujarat Technological University) BE/BTech (Bachelor of Engineering / Bachelor of Technology) 2019 Summer 6th Sem New 2164002 Utilities For Civil Infrastructure Previous Question Paper
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?VI(NEW) ? EXAMINATION ? SUMMER 2019
Subject Code:2164002 Date:14/05/2019
Subject Name:Utilities for Civil Infrastructure
Time:10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
4. Q.1 is compulsory.
Marks
Q.1 (a) Explain following network utility command with an example:
Ipconfig, ping, tracert.
03
(b) Show the functionality of following network Utilities
1. Ping 2. Ipconfig
04
(c) Explain following,
1) Duct, 2) Elements of fire and classes of fire, 3) Building lifts, 4) Graphical
representation: Types of heat gain in space.
07
Q.2 (a) What do you mean by pipe fitting and mention various types of distribution
network.
03
(b) What do you mean by per capita demand? Explain the factors affecting per capita
demand.
04
(c) Using the given information find the population of city in 2030 and 2080 using
arithmetic increase method, geometric increase method and incremental increase
methods.
Year 1910 1920 1930 1940 1950 1960 1970
Population 23078 65900 92600 102300 134000 170070 210087
07
OR
(c) The drainage area of one sector of a town is 12 hectares. The classification of the
surface of this area is as follows:
Percent of total surface
area
Type of surface Coefficient of runoff
20% Hard Pavement 0.85
20% Roof surface 0.80
15% Unpaved street 0.20
30% Garden and Lawn 0.20
15% Wooded area 0.15
If the time of concentration for the area is 30 minutes, find the maximum runoff.
Use the formula: R =
90 0
?? +60
07
Q.3 (a) You have been asked to design digital classroom. List out the functionalities which
can be provided to make it possible.
03
(b) What is GPS? What are its applications? 04
(c) Briefly explain twisted pair, coaxial cable and fiber optics cables. 07
FirstRanker.com - FirstRanker's Choice
1
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?VI(NEW) ? EXAMINATION ? SUMMER 2019
Subject Code:2164002 Date:14/05/2019
Subject Name:Utilities for Civil Infrastructure
Time:10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
4. Q.1 is compulsory.
Marks
Q.1 (a) Explain following network utility command with an example:
Ipconfig, ping, tracert.
03
(b) Show the functionality of following network Utilities
1. Ping 2. Ipconfig
04
(c) Explain following,
1) Duct, 2) Elements of fire and classes of fire, 3) Building lifts, 4) Graphical
representation: Types of heat gain in space.
07
Q.2 (a) What do you mean by pipe fitting and mention various types of distribution
network.
03
(b) What do you mean by per capita demand? Explain the factors affecting per capita
demand.
04
(c) Using the given information find the population of city in 2030 and 2080 using
arithmetic increase method, geometric increase method and incremental increase
methods.
Year 1910 1920 1930 1940 1950 1960 1970
Population 23078 65900 92600 102300 134000 170070 210087
07
OR
(c) The drainage area of one sector of a town is 12 hectares. The classification of the
surface of this area is as follows:
Percent of total surface
area
Type of surface Coefficient of runoff
20% Hard Pavement 0.85
20% Roof surface 0.80
15% Unpaved street 0.20
30% Garden and Lawn 0.20
15% Wooded area 0.15
If the time of concentration for the area is 30 minutes, find the maximum runoff.
Use the formula: R =
90 0
?? +60
07
Q.3 (a) You have been asked to design digital classroom. List out the functionalities which
can be provided to make it possible.
03
(b) What is GPS? What are its applications? 04
(c) Briefly explain twisted pair, coaxial cable and fiber optics cables. 07
2
OR
Q.3 (a) Briefly explain Hub, switch and Modem. 03
(b) Write brief short note on RFID. 04
(c) Discuss OSI reference model. 07
Q.4 (a) What are the types of electrical welding used in industry? 03
(b) What are the different methods of laying underground cable? 04
(c) Describe different types of UPS system. 07
OR
Q.4 (a) What is power modulator? 03
(b) What are the different types of Electrical heating? 04
(c) Describe different types of hydro power plants with diagrams. 07
Q.5 (a) What is air conditioning? Mention human thermal comfort conditions. 03
(b) Enlist the basic types of firefighting systems. Explain any one in detail. 04
(c) The atmospheric air at 30?C dry bulb temperature and 75% relative humidity enter
a cooling coil at the rate of 200 m
3
/min. The coil dew point temperature is 14?C
and the bypass factor of the coil is 0.1.
Determine:
1. The temperature of air leaving the cooling coil
2. The capacity of the cooling coil in tonnes of refrigeration and in kilowatt
3. The amount of water vapour removed per minute
4. The sensible heat factor for the process.
Note: you need to attach psychrometric chart with marked process.
07
OR
Q.5 (a) Differentiate between Building lifts vs. Escalators 03
(b) Dry bulb temperature, Wet bulb temperature, Dew point temperature, Relative
humidity
04
(c) The main air supply duct of an air conditioning system is 800 mm*600 mm in cross
section, and carries 300 m
3
/min of standard air. It branches into two ducts of cross
section 600 mm*500 mm and 600 mm*400mm. If the mean velocity in the larger
branch is 480 m/min,
Find the, 1) Mean velocity in the main duct and the smaller branch, and 2) mean
velocity pressure in each duct.
07
FirstRanker.com - FirstRanker's Choice
1
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?VI(NEW) ? EXAMINATION ? SUMMER 2019
Subject Code:2164002 Date:14/05/2019
Subject Name:Utilities for Civil Infrastructure
Time:10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
4. Q.1 is compulsory.
Marks
Q.1 (a) Explain following network utility command with an example:
Ipconfig, ping, tracert.
03
(b) Show the functionality of following network Utilities
1. Ping 2. Ipconfig
04
(c) Explain following,
1) Duct, 2) Elements of fire and classes of fire, 3) Building lifts, 4) Graphical
representation: Types of heat gain in space.
07
Q.2 (a) What do you mean by pipe fitting and mention various types of distribution
network.
03
(b) What do you mean by per capita demand? Explain the factors affecting per capita
demand.
04
(c) Using the given information find the population of city in 2030 and 2080 using
arithmetic increase method, geometric increase method and incremental increase
methods.
Year 1910 1920 1930 1940 1950 1960 1970
Population 23078 65900 92600 102300 134000 170070 210087
07
OR
(c) The drainage area of one sector of a town is 12 hectares. The classification of the
surface of this area is as follows:
Percent of total surface
area
Type of surface Coefficient of runoff
20% Hard Pavement 0.85
20% Roof surface 0.80
15% Unpaved street 0.20
30% Garden and Lawn 0.20
15% Wooded area 0.15
If the time of concentration for the area is 30 minutes, find the maximum runoff.
Use the formula: R =
90 0
?? +60
07
Q.3 (a) You have been asked to design digital classroom. List out the functionalities which
can be provided to make it possible.
03
(b) What is GPS? What are its applications? 04
(c) Briefly explain twisted pair, coaxial cable and fiber optics cables. 07
2
OR
Q.3 (a) Briefly explain Hub, switch and Modem. 03
(b) Write brief short note on RFID. 04
(c) Discuss OSI reference model. 07
Q.4 (a) What are the types of electrical welding used in industry? 03
(b) What are the different methods of laying underground cable? 04
(c) Describe different types of UPS system. 07
OR
Q.4 (a) What is power modulator? 03
(b) What are the different types of Electrical heating? 04
(c) Describe different types of hydro power plants with diagrams. 07
Q.5 (a) What is air conditioning? Mention human thermal comfort conditions. 03
(b) Enlist the basic types of firefighting systems. Explain any one in detail. 04
(c) The atmospheric air at 30?C dry bulb temperature and 75% relative humidity enter
a cooling coil at the rate of 200 m
3
/min. The coil dew point temperature is 14?C
and the bypass factor of the coil is 0.1.
Determine:
1. The temperature of air leaving the cooling coil
2. The capacity of the cooling coil in tonnes of refrigeration and in kilowatt
3. The amount of water vapour removed per minute
4. The sensible heat factor for the process.
Note: you need to attach psychrometric chart with marked process.
07
OR
Q.5 (a) Differentiate between Building lifts vs. Escalators 03
(b) Dry bulb temperature, Wet bulb temperature, Dew point temperature, Relative
humidity
04
(c) The main air supply duct of an air conditioning system is 800 mm*600 mm in cross
section, and carries 300 m
3
/min of standard air. It branches into two ducts of cross
section 600 mm*500 mm and 600 mm*400mm. If the mean velocity in the larger
branch is 480 m/min,
Find the, 1) Mean velocity in the main duct and the smaller branch, and 2) mean
velocity pressure in each duct.
07
3
FirstRanker.com - FirstRanker's Choice
This post was last modified on 20 February 2020