Download GTU (Gujarat Technological University) BE/BTech (Bachelor of Engineering / Bachelor of Technology) 2018 Winter 5th Sem New 2150608 Structural Analysis Ii Previous Question Paper
1
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?V (NEW) EXAMINATION ? WINTER 2018
Subject Code:2150608 Date:20/11/2018
Subject Name:Structural Analysis-II
Time: 10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
MARKS
Q.1 (a) Explain with illustrations the characteristics of flexibility /
stiffness matrices.
03
(b) Derive slope and deflection method equations from first
fundamentals.
04
(c) Analyse the beam as shown in fig.-1 by Moment Distribution
Method and draw BMD.
07
Q.2 (a) Explain causes of side-sway in plane frame with illustrations. 03
(b) A two span simple support continuous beam ABC having
AB=5 m and BC = 6m. The span AB is loaded by a point
load at centre by 50kN and span BC is loaded by a UDL of
20kN/m over entire span. Analyze the beam by moment
distribution method and draw BMD.
04
(c) Analyse the beam shown in fig.-3 by slope-deflection
method and draw BMD. Take EI=constant.
07
OR
(c) Analyse the beam shown in fig.-3 by flexibility method and
draw BMD.
07
Q.3 (a) Obtain slope-deflection equations for the beam shown in fig.-
2.
03
(b) Calculate the stiffness matrix for the beam shown in fig.-2. 04
(c) For a two span simple support continuous beam ABC having
AB=5m and BC=5m, calculate the ILD ordinates for R A at
every 1m interval.
07
OR
Q.3 (a) (i) Define influence line diagram.
(ii) Construct Influence Line Diagrams for Reaction (RA)
and bending moment at 2 m from free end for a cantilever
beam AB fixed at A and having span 5m.
03
(b) A UDL of intensity 16 kN/m, 5 m long moving on a beam
of 10 m span. Find maximum bending moment at a section
4m from left support.
04
(c) Three point loads 90 kN, 75 kN and 55 kN equally spaced
3m respectively, cross a girder of 30 m span from left to right,
the 55 kN load leading. Calculate absolute maximum
bending moment in the beam and its location.
07
Q.4 (a) Explain Castigliano?s both theorems. 03
(b) Calculate the slope at free end B for a cantilever beam AB
having length 5m and loaded by a UDL of 30 kN/m over
whole span using energy principle.
04
www.FirstRanker.com www.FirstRanker.com
www.FirstRanker.com
FirstRanker.com - FirstRanker's Choice
www.FirstRanker.com
1
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?V (NEW) EXAMINATION ? WINTER 2018
Subject Code:2150608 Date:20/11/2018
Subject Name:Structural Analysis-II
Time: 10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
MARKS
Q.1 (a) Explain with illustrations the characteristics of flexibility /
stiffness matrices.
03
(b) Derive slope and deflection method equations from first
fundamentals.
04
(c) Analyse the beam as shown in fig.-1 by Moment Distribution
Method and draw BMD.
07
Q.2 (a) Explain causes of side-sway in plane frame with illustrations. 03
(b) A two span simple support continuous beam ABC having
AB=5 m and BC = 6m. The span AB is loaded by a point
load at centre by 50kN and span BC is loaded by a UDL of
20kN/m over entire span. Analyze the beam by moment
distribution method and draw BMD.
04
(c) Analyse the beam shown in fig.-3 by slope-deflection
method and draw BMD. Take EI=constant.
07
OR
(c) Analyse the beam shown in fig.-3 by flexibility method and
draw BMD.
07
Q.3 (a) Obtain slope-deflection equations for the beam shown in fig.-
2.
03
(b) Calculate the stiffness matrix for the beam shown in fig.-2. 04
(c) For a two span simple support continuous beam ABC having
AB=5m and BC=5m, calculate the ILD ordinates for R A at
every 1m interval.
07
OR
Q.3 (a) (i) Define influence line diagram.
(ii) Construct Influence Line Diagrams for Reaction (RA)
and bending moment at 2 m from free end for a cantilever
beam AB fixed at A and having span 5m.
03
(b) A UDL of intensity 16 kN/m, 5 m long moving on a beam
of 10 m span. Find maximum bending moment at a section
4m from left support.
04
(c) Three point loads 90 kN, 75 kN and 55 kN equally spaced
3m respectively, cross a girder of 30 m span from left to right,
the 55 kN load leading. Calculate absolute maximum
bending moment in the beam and its location.
07
Q.4 (a) Explain Castigliano?s both theorems. 03
(b) Calculate the slope at free end B for a cantilever beam AB
having length 5m and loaded by a UDL of 30 kN/m over
whole span using energy principle.
04
www.FirstRanker.com www.FirstRanker.com
www.FirstRanker.com
www.FirstRanker.com
2
(c) Fig.-4 shows simply supported beam AB having varying
moment of inertia. It is subjected to an eccentric load.
Calculate deflection under the load using energy principle.
07
OR
Q.4 (a) Write and explain Muller Breslau?s principal. 03
(b) Calculate deflection at B for a cantilever beam AB, fixed at
A and free at B, and is acted upon by a UDL of 45 kN/m over
whole span using unit load method. Take EI=constant.
Consider length of AB=3m.
04
(c) A propped cantilever beam of span 7m has fixed support at
left end and roller support at right end is loaded by a UDL of
25kN/m up to 3m from left support. Analyze the beam by
energy principle and draw BMD.
07
Q.5 (a) Calculate slope-deflection equations for the portal frame as
shown in fig.-5.
03
(b) Choosing MA and MB as redundants, find flexibility matrix
for a fixed beam having span of 8m. Take EI=Constant.
04
(c) Analyze the portal frame as shown in fig.-5 by flexibility
matrix method and draw BMD.
07
OR
Q.5 (a) Define: Stiffness, Distribution Factor, Carry Over Factor. 03
(b) Find distribution factors for the beam shown in fig.-6. 04
(c) Analyze the beam as shown in fig.-6 by stiffness matrix
method.
07
Fig.-1
*************
C
3m, 2EI 4m, EI
A
C
B
30kN
60kN
Fig.-3
Fig.-4
Fig.-5
Fig.-2
A
C
B
30kN/m
50kN
4m
2m
2m
A
6m
B 5m
60kN/m 35kN/m
A
B
C
2m,I
5m,3I
2m,I
50kN/m
B
5 m 6 m
B C
A
25 kN
4 m 5 m
40 kN
(EI) (EI)
Fig.-6
www.FirstRanker.com www.FirstRanker.com
www.FirstRanker.com
FirstRanker.com - FirstRanker's Choice
This post was last modified on 20 February 2020