Download GTU (Gujarat Technological University) BE/BTech (Bachelor of Engineering / Bachelor of Technology) 2018 Winter 8th Sem Old 182503 Design Of Product And Machine Tools Previous Question Paper
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?VIII (OLD) EXAMINATION ? WINTER 2018
Subject Code: 182503 Date: 19/11/2018
Subject Name: Design Of Product And Machine Tools
Time: 02:30 PM TO 05:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q.1 (a) Discuss general requirements of machine tool design. 07
(b) Explain various Elementary transmission methods for Transforming rotary
motion into Translatory.
07
Q.2 (a) With neat sketch explain following gear box:
(1) Feed box with tumbler gear (2) Feed box with change gear
07
(b) State the functions and requirements of the spindle unit along with the
materials.
07
OR
(b) Discuss various types of Bed structure and wall arrangements and their
applications with neat sketch.
07
Q.3 (a) Design hydrodynamic journal bearing for a shaft of blower for following data:
Bearing Load due to belt force: 3000N, Bearing Load due to weight of rotor:
600N, Speed of Blower: 600 rpm, diameter of shaft: 50 mm, Expected
temperature of oil:70?, ambient temperature: 30?, c/d ratio - 0.0015,
Minimum film thickness: 0.019 mm
Calculate: actual attitude, type of oil used, power loss, heat generated, actual
minimum film thickness.
07
(b) State advantages and Disadvantages of hydrodynamic and hydrostatic bearings.
Discuss where each one is more suitable.
07
OR
Q.3 (a) Design hydrodynamic journal bearing for lathe spindle from following data:
Load on spindle: 20kN, Speed of Spindle: 2000 rpm, diameter of spindle at
journal: 100 mm, l/d = 2, Clearance ratio: 2*10
-3
, viscosity of oil at working
temperature = 35 *10
-3
kg/m.s
Calculate: bearing characteristic number.
07
(b) Explain the importance of lubrication of ball and roller bearing. Illustrate few
methods of carrying out proper lubrication for specific application.
07
Q.4 (a) Explain the design procedure of Slideways for wear resistance. 07
(b) Give requirement of Protecting devices for slide ways and explain various types
of protecting devices with neat sketch.
07
OR
Q.4 (a) Discuss various shapes of slide ways and justify their application for machine
tools.
07
(b) Find the diameter of rope required for an overhead travelling crane with lifting
magnet. Take, Lifting capacity: 5000 kg, Weight lifting magnet = 2000 kg,
weight lifting tackle = 120 kg, Lifting height = 8 meters, No of Rope parts =
4Take Dmin/d = 23, dw=0.045, Er=8*10
4
N/mm
2
, ?u= 1500 N/mm
2
07
FirstRanker.com - FirstRanker's Choice
1
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?VIII (OLD) EXAMINATION ? WINTER 2018
Subject Code: 182503 Date: 19/11/2018
Subject Name: Design Of Product And Machine Tools
Time: 02:30 PM TO 05:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q.1 (a) Discuss general requirements of machine tool design. 07
(b) Explain various Elementary transmission methods for Transforming rotary
motion into Translatory.
07
Q.2 (a) With neat sketch explain following gear box:
(1) Feed box with tumbler gear (2) Feed box with change gear
07
(b) State the functions and requirements of the spindle unit along with the
materials.
07
OR
(b) Discuss various types of Bed structure and wall arrangements and their
applications with neat sketch.
07
Q.3 (a) Design hydrodynamic journal bearing for a shaft of blower for following data:
Bearing Load due to belt force: 3000N, Bearing Load due to weight of rotor:
600N, Speed of Blower: 600 rpm, diameter of shaft: 50 mm, Expected
temperature of oil:70?, ambient temperature: 30?, c/d ratio - 0.0015,
Minimum film thickness: 0.019 mm
Calculate: actual attitude, type of oil used, power loss, heat generated, actual
minimum film thickness.
07
(b) State advantages and Disadvantages of hydrodynamic and hydrostatic bearings.
Discuss where each one is more suitable.
07
OR
Q.3 (a) Design hydrodynamic journal bearing for lathe spindle from following data:
Load on spindle: 20kN, Speed of Spindle: 2000 rpm, diameter of spindle at
journal: 100 mm, l/d = 2, Clearance ratio: 2*10
-3
, viscosity of oil at working
temperature = 35 *10
-3
kg/m.s
Calculate: bearing characteristic number.
07
(b) Explain the importance of lubrication of ball and roller bearing. Illustrate few
methods of carrying out proper lubrication for specific application.
07
Q.4 (a) Explain the design procedure of Slideways for wear resistance. 07
(b) Give requirement of Protecting devices for slide ways and explain various types
of protecting devices with neat sketch.
07
OR
Q.4 (a) Discuss various shapes of slide ways and justify their application for machine
tools.
07
(b) Find the diameter of rope required for an overhead travelling crane with lifting
magnet. Take, Lifting capacity: 5000 kg, Weight lifting magnet = 2000 kg,
weight lifting tackle = 120 kg, Lifting height = 8 meters, No of Rope parts =
4Take Dmin/d = 23, dw=0.045, Er=8*10
4
N/mm
2
, ?u= 1500 N/mm
2
07
2
Q.5 (a) Design the crane hook for the lifting capacity of 8 tonnes, having triangular
section. Take permissible tensile stress 110 N/mm
2
for forged steel.
07
(b) Discuss the economic criteria that are important in Evaluative product design. 07
OR
Q.5 (a) Explain Computer assisted design and Robotics in Product design. 07
(b) Discuss the importance of CAD in developing the products. 07
*************
FirstRanker.com - FirstRanker's Choice
This post was last modified on 20 February 2020