Download AKTU B-Tech 8th Sem 2018-19 NME055 Advanced Welding Technology Question Paper

Printed Pages: 01
Paper Id: 140250 Sub Code: NME055
Roll No.

--- Content provided by FirstRanker.com ---

Time: 3 Hours Total Marks: 100

Note: 1. Attempt all Sections. If require any missing data; then choose suitably.

SECTION A

--- Content provided by FirstRanker.com ---

1. Attempt all questions in brief. 2 x 10 = 20

1. What types of welded joints used in welding?
2. What do you mean by cladding & surfacing?
3. Define welding? Make comparison with other joining process?
4. Describe various welding symbols.

--- Content provided by⁠ FirstRanker.com ---

5. Write short note on arc blow in welding process?
6. What is weld distortion and its prevention?
7. Explain weld affected zone?
8. List different type of brazing techniques available? Explain any one in detail.
9. What is physics of arc welding?

--- Content provided by​ FirstRanker.com ---

10. Define reclamation welding?

SECTION B

2. Attempt any three of the following: 10x3=30

1. Make comparison between Laser beam welding and electron beam welding?
2. Explain type of underwater welding and their working mechanisms?

--- Content provided by‍ FirstRanker.com ---

3. List type of weld defects explains any two with neat diagram?
4. Explain the effects of various alloying elements on weldability.
5. Write short note on use of Transformer, Rectifier and Generators in welding.

SECTION C

3. Attempt any one part of the following: 10x1=10

--- Content provided by​ FirstRanker.com ---

1. What do you mean by heating and cooling rate? How it affects the properties of weld.
2. What are the methods used for for measuring the stresses in weld structure? Explain any one of them.

4. Attempt any one part of the following: 10x1=10

1. What do you mean by metalizing and hard facing? Explain process giving its advantage and applications.
2. Write short note on
   1. Welding of cast iron.

   --- Content provided by​ FirstRanker.com ---

   2. Welding of low carbon steel.
   3. Welding of aluminum.

5. Attempt any one part of the following: 10x1=10

1. Discuss the principle and working of ultrasonic inspections .Also describes its advantage, limitations and applications.

--- Content provided by​ FirstRanker.com ---

2. Define cracking of weld? Explain hot cracking and cold cracking? List the rules that must be followed to avoid cracking?

6. Attempt any one part of the following: 10x1=10

1. What do you understand by explosive welding; Write its advantage, disadvantage and applications in detail?
2. Explain the principle and working of FCAW welding? Differentiate MIG &FCAW? What variables affect weld quality of FCAW welding?

7. Attempt any one part of the following: 10x1=10

--- Content provided by​ FirstRanker.com ---

1. The arc length voltage characteristic is given by expression V=24+4L (L=Length of arc in mm). The volt ampere characteristics of power source can be approximated by a straight line with open circuit voltage 80V and short circuit current 600A determine optimum arc length and maximum power.
2. Explain in detail the mechanism and types of metal transfer in various arc welding processes.

FirstRanker.com