Download AKTU B-Tech 8th Sem 2016-17 EME054 Advance Synthesis Of Mechanisms Question Paper

B.TECH.

THEORY EXAMINATION (SEM–VIII) 2016-17

ADVANCE SYNTHESIS OF MECHANISMS

--- Content provided by‌ FirstRanker.com ---

Max. Marks : 100

Note: Be precise in your answer. In case of numerical problem assume data wherever not provided.

SECTION – A

1. Attempt the following:
   1. What is the degree of freedom?
   2. Explain the transmission angle.

   --- Content provided by‍ FirstRanker.com ---

   3. Define the term dimensional synthesis.
   4. Write down the equation for coupler curve.
   5. Write the short notes on chebyshev spacing of accuracy points.
   6. What is the coupler curve?
   7. What is the mechanical error in linkage?

   --- Content provided by‌ FirstRanker.com ---

   8. What is the approximate mechanism?
   9. Write the Freudenstein's equation for velocity analysis.
   10. Explain exact straight line mechanism.

   10 x 2 = 20

--- Content provided by⁠ FirstRanker.com ---

2. Attempt any five of the following questions:
   1. Discuss the procedure of five accuracy point's synthesis of crank and follower mechanism.
   2. Discuss the procedure of designing a four bar function generator with three accuracy points.
   3. Design a slider crank mechanism in which two successive angular displacements Q12 and Q23 of the crank produce, respectively two successive linear displacements S12 and S23 of the follower.
   4. Explain briefly with the help of help of neat sketches working and application of one planar and one spatial mechanism.
   5. Explain with the help of neat sketches cognate linkages and their applications

   --- Content provided by​ FirstRanker.com ---

   6. Design a four bar linkage to transfer a link AB through three specified positions A1B1, A2B2 and A3B3.
   7. Locate all the instantaneous centres of rotation of the mechanism shown in Fig.

   5 x 10 = 50

   SECTION – B

   A

   --- Content provided by‌ FirstRanker.com ---

   D

   02

   8. Design a four bar linkage in which two successive clockwise angular displacements of 20° and 30° of the crank produce respectively, two successive angular displacements 10° and 15° of the follower.

3. Attempt any two of the following questions:

   2 x 15 = 30

   --- Content provided by‌ FirstRanker.com ---

   Design a slider crank mechanism so that the displacement of the slider is proportional to the square of crank rotation in the interval 45° = 0 = 135°. Use the three point Chebyshev's spacing.

4. Synthesize a four bar linkage that will generate a function Y = X1.5, 1 = X = 4. Take three accuracy points. ? = 30°, f? = 90° and ?f = ?0 = 90°, where 00 and q? respectively represent the initial angular positions of the input and output crank. ? and Aq are respectively the ranges of angular movements of the input and output crank.
5. Explain with the help of neat sketches one approximate and one exact straight line mechanism.

--- Content provided by​ FirstRanker.com ---