Download GTU B.Tech 2020 Winter 7th Sem 2170901 Inter Connected Power System Question Paper

FirstRanker.com

Subject Code:2170901

GUJARAT TECHNOLOGICAL UNIVERSITY

--- Content provided by​ FirstRanker.com ---

BE- SEMESTER-VII (NEW) EXAMINATION - WINTER 2020

Subject Name: Inter Connected Power System

Time:10:30 AM TO 12:30 PM

Date:25/01/2021

Total Marks: 56

--- Content provided by FirstRanker.com ---

Instructions:

1. Attempt any FOUR questions out of EIGHT questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.

Q1

--- Content provided by FirstRanker.com ---

1. (a) State the purpose of load flow study. What information is available from load flow study? [03]
2. (b) In a power system consisting of two generating stations the incremental costs in Rs/MWh are IC1 = 0.15P; + 35, IC2 = 0.20P> + 28. The plant supplies a load of 150 MW. Neglecting losses determine the most economical division of load. [04]
3. (c) From the first principles, derive the swing equation for synchronous machine [07]

Q2

1. (a) What is meant by interconnected power system? State its advantages [03]

--- Content provided by‍ FirstRanker.com ---

2. (b) Discuss flat frequency method for frequency control [04]
3. (c) For a 3-bus system, the line impedances in p.u. are given below [07]
   Line (bus to bus) Impedance
   1-2 0.06 +j0.18
   1-3 0.03 +j0.09
   

   --- Content provided by FirstRanker.com ---

   2-3 0.08 +j0.24
   Determine Ybus matrix

Q3

1. (a) Is FDLF method superior to NR method of load flow? Comment. [03]
2. (b) A power system has two generating stations and power is being dispatched economically with Py'=150 MW and P> =275 MW. The loss coefficients are Bii = 0.001 MW Bj> = -0.0001 MW | By, = 0.0013 MWL, Find the penalty factor of plant 1. [04]

--- Content provided by‌ FirstRanker.com ---

3. (c) Derive the transmission loss formula explaining current distribution factors. Clearly state all assumptions made in above derivation. [03]

Q4

1. (a) An alternator having an induced emf of 1.6 pu is connected to an infinite bus having voltage of 1.0 pu. If the bus bar has reactance of 0.6 pu and the alternator has reactance of 0.2 pu, find the steady state stability limit in pu [04]
2. (b) Write short notes on Tie line load bias control [07]
3. (c) Describe the turbine speed governing system for controlling the real power flow in power system [03]

--- Content provided by​ FirstRanker.com ---

Q.5

1. (a) Define steady state stability and transient stability [03]
2. (b) A synchronous generator of reactance 0.4 pu is connected to an infinite bus (|V] = 1.0 pu) through transformers and transmission line having total reactance of 0.2 pu. The generator no load voltage is 1.2 pu and inertia constant H =5 sec. Calculate the frequency of natural oscillations if generator is loaded to 60% of its maximum power transfer limit. Assume f =60 Hz [04]
3. (c) Explain how existing Zbus matrix is modified when a link is added between two old buses (Type 4 modification) [07]

Q.6

--- Content provided by⁠ FirstRanker.com ---

1. (a) Discuss equal area criteria of stability [03]
2. (b) What is synchronizing coefficient? How it helps in determining system stability? [04]
3. (c) State and explain different methods of voltage control [07]

Q.7

1. (a) Explain the phenomena of cascade tripping in power systems [03]

--- Content provided by‍ FirstRanker.com ---

2. (b) Discuss the tasks carried out by Load Dispatch Centre [04]
3. (c) Explain the method of numerical solution of swing equation [07]

Q.8

1. (a) Explain the reclosure case of equal area criterion showing the critical clearing angle & and angle of reclosure 8 [03]
2. (b) Two generators operate in parallel and supply a total load of 400 MW. The capacities of the machines are 200 MW and 500 MW and both the generators have droop characteristics of 4% from no load to full load. Calculate the load taken by the each machine assuming free governor action. Also find the system frequency at this load. Noload frequency is 50 Hz. [04]

--- Content provided by​ FirstRanker.com ---

3. (c) A generator is delivering 60% of its maximum power to an infinite bus through a transmission line. A fault occurs such that the reactance between the generator and the infinite bus is increased to 3 times its pre-fault value. When the fault is cleared the maximum power that can be delivered is 80% of the original maximum value. Determine the critical clearing angle [07]

FirstRanker.com