(Common to IT & ME)
Time: 3 hours Max. Marks: 70
--- Content provided by FirstRanker.com ---
(Answer all five units, 05 X 14 = 70 Marks)*****
UNIT ? I
--- Content provided by FirstRanker.com ---
1 Construct Hyperbola with distance of the focus from the directrix as 50 mm & eccentricity as 3/2.Draw normal and tangent to the curve at a point 60 mm from the directrix.
OR
2 Construct the hypocycloid when the generating circle is of 50 mm diameter and the directing circle
is having 100 mm diameter.
--- Content provided by FirstRanker.com ---
UNIT ? II
3 The distance between Nagpur and Chandrapur is 156 km. The cities are shown 156 mm apart on a
road map. Draw a diagonal scale with this RF and long enough to measure up to 200 kilometers.
--- Content provided by FirstRanker.com ---
Mark on it: (i) 109 km. (ii) 168 km.OR
4 (a) A point 30 mm above xy line is the plan view of two points P and Q. The elevation of P is 45 mm
above the H.P while that of the point Q is 35 mm below the H.P. Draw the projections of the points
and state their position with reference to the principal planes and the quadrant they lie.
--- Content provided by FirstRanker.com ---
(b) A point D is 50 mm from both the reference planes. Draw its projections in all possible positions.UNIT ? III
5 The top view of a 75 mm long line CD measures 50 mm. C is 40 mm in front of the V.P and
--- Content provided by FirstRanker.com ---
10 mm below the HP. D is 15 mm in front of the V.P and is above the H.P. Draw the front view ofCD and find its inclinations with the H.P and the V.P. Show its traces.
OR
6 A thin 30? - 60? set-square has its longest edge in the V.P and inclined at 30? to the H.P. Its surface
makes an angle of 45? with the V.P. Draw its projections.
--- Content provided by FirstRanker.com ---
UNIT ? IV
7 A hexagonal pyramid of 30 mm side of base and 60 mm length of axis is resting on one of its
triangular faces on the H.P having a slant edge containing that face parallel to the V.P. Draw the
--- Content provided by FirstRanker.com ---
projections of the pyramid.OR
8 A pentagonal pyramid of side 30 mm and axis height 70 mm is resting on H.P being one side of the
base parallel to the V.P. Draw the development of the lateral surface of the solid.
--- Content provided by FirstRanker.com ---
UNIT ? V9 Draw the isometric view of a hexagonal prism of side 30 mm and axis height 60 mm when a sphere
of 25 mm radius is resting centrally on its top.
OR
--- Content provided by FirstRanker.com ---
Contd. in page 2--- Content provided by FirstRanker.com ---
Page 1 of 2
--- Content provided by FirstRanker.com ---
R15FirstRanker.com - FirstRanker's Choice
Code: 15A03101b
--- Content provided by FirstRanker.com ---
B.Tech I Year II Semester (R15) Regular & Supplementary Examinations May/June 2019
ENGINEERING DRAWING
(Common to IT & ME)
--- Content provided by FirstRanker.com ---
Time: 3 hours Max. Marks: 70(Answer all five units, 05 X 14 = 70 Marks)
*****
--- Content provided by FirstRanker.com ---
UNIT ? I1 Construct Hyperbola with distance of the focus from the directrix as 50 mm & eccentricity as 3/2.
Draw normal and tangent to the curve at a point 60 mm from the directrix.
OR
--- Content provided by FirstRanker.com ---
2 Construct the hypocycloid when the generating circle is of 50 mm diameter and the directing circleis having 100 mm diameter.
UNIT ? II
--- Content provided by FirstRanker.com ---
3 The distance between Nagpur and Chandrapur is 156 km. The cities are shown 156 mm apart on aroad map. Draw a diagonal scale with this RF and long enough to measure up to 200 kilometers.
Mark on it: (i) 109 km. (ii) 168 km.
OR
4 (a) A point 30 mm above xy line is the plan view of two points P and Q. The elevation of P is 45 mm
--- Content provided by FirstRanker.com ---
above the H.P while that of the point Q is 35 mm below the H.P. Draw the projections of the pointsand state their position with reference to the principal planes and the quadrant they lie.
(b) A point D is 50 mm from both the reference planes. Draw its projections in all possible positions.
UNIT ? III
--- Content provided by FirstRanker.com ---
5 The top view of a 75 mm long line CD measures 50 mm. C is 40 mm in front of the V.P and
10 mm below the HP. D is 15 mm in front of the V.P and is above the H.P. Draw the front view of
CD and find its inclinations with the H.P and the V.P. Show its traces.
OR
--- Content provided by FirstRanker.com ---
6 A thin 30? - 60? set-square has its longest edge in the V.P and inclined at 30? to the H.P. Its surfacemakes an angle of 45? with the V.P. Draw its projections.
UNIT ? IV
--- Content provided by FirstRanker.com ---
7 A hexagonal pyramid of 30 mm side of base and 60 mm length of axis is resting on one of itstriangular faces on the H.P having a slant edge containing that face parallel to the V.P. Draw the
projections of the pyramid.
OR
8 A pentagonal pyramid of side 30 mm and axis height 70 mm is resting on H.P being one side of the
--- Content provided by FirstRanker.com ---
base parallel to the V.P. Draw the development of the lateral surface of the solid.UNIT ? V
9 Draw the isometric view of a hexagonal prism of side 30 mm and axis height 60 mm when a sphere
--- Content provided by FirstRanker.com ---
of 25 mm radius is resting centrally on its top.OR
Contd. in page 2
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
Page 1 of 2R15
Code: 15A03101b
--- Content provided by FirstRanker.com ---
10 Draw the front view, top view and the right side view of the drawing given in figure below. All the
dimensions in mm.
--- Content provided by FirstRanker.com ---
*****
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
Page 2 of 2
R15
FirstRanker.com - FirstRanker's Choice
--- Content provided by FirstRanker.com ---