Time: 3 hours Max. Marks: 70
(Answer all five units, 05 X 14 = 70 Marks)
--- Content provided by FirstRanker.com ---
*****UNIT ? I
1 Draw and name the curve by focus-directrix method when the distance of the focus from the directrix is
--- Content provided by FirstRanker.com ---
equal to 60 mm and the eccentricity is 2/3.OR
2 A circle of 45 mm diameter rolls along a straight line without slipping. Draw a curve traced out by point P
on the circumference for one complete revolution of the circle. Name the curve and draw a tangent to
the curve at a distance of 35 mm from the straight line.
--- Content provided by FirstRanker.com ---
UNIT ? II
3 The Marina Beach at Chennai, is 2.5 km long. On inspection of the road map, its equivalent distance
measures 5 cm. Draw a diagonal scale to read 50 m minimum. Mark on the scale a distance of 6350 m.
--- Content provided by FirstRanker.com ---
OR4 Draw the projections on the following points on the same reference line, keeping the projectors 30 mm
apart:
(i) A, 30 mm above HP and 30 mm infront of VP.
(ii) B, 45 mm below HP and 30 mm behind VP
--- Content provided by FirstRanker.com ---
(iii) C, 40 mm above HP and in the VP(iv) D, 40 mm infront of VP and in HP
(v) E, 45 mm below HP and in VP
(vi) F, 50 mm behind VP and in the HP
(vii) G, in both HP and VP.
--- Content provided by FirstRanker.com ---
UNIT ? III
5 The end point C of an 80 mm long line CD is 15 mm above the HP and 10 mm infront of the VP. The
line is inclined at 30 to the HP and 45 to the V.P and the other end point D lies in the second quadrant.
--- Content provided by FirstRanker.com ---
Draw its projections.OR
6 Draw the projections of a rhombus having diagonals 125 mm and 50 mm long, the smaller diagonal of
which is parallel to both the principal planes while the other is inclined at 30 to HP.
--- Content provided by FirstRanker.com ---
UNIT ? IV7 A regular tetrahedron of edges each 40 mm long rests on one of its corners on HP with its axis inclined
to HP at 45 . Draw its projections.
OR
--- Content provided by FirstRanker.com ---
8 Draw the development of the lateral surface of a hexagonal prism of 24 mm base edge and 68 mmheight. An insect moves on its surface from a corner on the base to the diametrically opposite corner of
the top face shortest route. Trace graphically the path of the insect in the front view.
Contd. in page 2
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
Page 1 of 2
R15
--- Content provided by FirstRanker.com ---
FirstRanker.com - FirstRanker's ChoiceCode: 15A03101b
B.Tech I Year II Semester (R15) Supplementary Examinations December 2016
--- Content provided by FirstRanker.com ---
ENGINEERING DRAWING(Common to ME and IT)
Time: 3 hours Max. Marks: 70
--- Content provided by FirstRanker.com ---
(Answer all five units, 05 X 14 = 70 Marks)*****
UNIT ? I
--- Content provided by FirstRanker.com ---
1 Draw and name the curve by focus-directrix method when the distance of the focus from the directrix isequal to 60 mm and the eccentricity is 2/3.
OR
2 A circle of 45 mm diameter rolls along a straight line without slipping. Draw a curve traced out by point P
on the circumference for one complete revolution of the circle. Name the curve and draw a tangent to
--- Content provided by FirstRanker.com ---
the curve at a distance of 35 mm from the straight line.UNIT ? II
3 The Marina Beach at Chennai, is 2.5 km long. On inspection of the road map, its equivalent distance
--- Content provided by FirstRanker.com ---
measures 5 cm. Draw a diagonal scale to read 50 m minimum. Mark on the scale a distance of 6350 m.OR
4 Draw the projections on the following points on the same reference line, keeping the projectors 30 mm
apart:
(i) A, 30 mm above HP and 30 mm infront of VP.
--- Content provided by FirstRanker.com ---
(ii) B, 45 mm below HP and 30 mm behind VP(iii) C, 40 mm above HP and in the VP
(iv) D, 40 mm infront of VP and in HP
(v) E, 45 mm below HP and in VP
(vi) F, 50 mm behind VP and in the HP
--- Content provided by FirstRanker.com ---
(vii) G, in both HP and VP.UNIT ? III
5 The end point C of an 80 mm long line CD is 15 mm above the HP and 10 mm infront of the VP. The
--- Content provided by FirstRanker.com ---
line is inclined at 30 to the HP and 45 to the V.P and the other end point D lies in the second quadrant.Draw its projections.
OR
6 Draw the projections of a rhombus having diagonals 125 mm and 50 mm long, the smaller diagonal of
which is parallel to both the principal planes while the other is inclined at 30 to HP.
--- Content provided by FirstRanker.com ---
UNIT ? IV
7 A regular tetrahedron of edges each 40 mm long rests on one of its corners on HP with its axis inclined
to HP at 45 . Draw its projections.
--- Content provided by FirstRanker.com ---
OR8 Draw the development of the lateral surface of a hexagonal prism of 24 mm base edge and 68 mm
height. An insect moves on its surface from a corner on the base to the diametrically opposite corner of
the top face shortest route. Trace graphically the path of the insect in the front view.
--- Content provided by FirstRanker.com ---
Contd. in page 2--- Content provided by FirstRanker.com ---
Page 1 of 2
--- Content provided by FirstRanker.com ---
R15Code: 15A03101b
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
UNIT ? V9 A sphere of diameter 40 mm rests centrally on the top of a square frustum, base 60 mm top 40 mm and
height 75 mm. Draw isometric view of the combination of solids.
OR
--- Content provided by FirstRanker.com ---
10 Draw the front view, top view and side view of the object whose isometric view is shown in the figurebelow (All dimensions are in mm).
*****
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
Page 2 of 2
R15
FirstRanker.com - FirstRanker's Choice
--- Content provided by FirstRanker.com ---