Download PTU B-Tech Bio Technology 2020 Dec 5th Sem 70502 Chemical Engineering Principles Question Paper

FirstRanker.com

B.Tech. (BT) (2012 to 2017) (Sem.-5)

CHEMICAL ENGINEERING PRINCIPLES

--- Content provided by‍ FirstRanker.com ---

Subject Code : BTBT-501

M.Code : 70502

Time : 3 Hrs. Max. Marks : 60

INSTRUCTIONS TO CANDIDATES :

1. SECTION-A is COMPULSORY consisting of TEN questions carrying TWO marks each.

--- Content provided by FirstRanker.com ---

2. SECTION-B contains FIVE questions carrying FIVE marks each and students have to attempt any FOUR questions.
3. SECTION-C contains THREE questions carrying TEN marks each and students have to attempt any TWO questions.

SECTION-A

Answer briefly :

1. Express a pressure of 20 x 10⁶ Pa in mm Hg.

--- Content provided by⁠ FirstRanker.com ---

2. Define Raoult’s law.
3. What is Molecularity of the reaction?
4. A reaction has a stoichiometric equation A + B ? 2R, state the order of the reaction.
5. Define space time.
6. Write the uses of following measurement :
   1. pH

   --- Content provided by​ FirstRanker.com ---

   2. Viscosity
7. State two disadvantages of continuous reactors.
8. What are the advantages of cascade control?
9. What is the ideal batch reactor?

--- Content provided by‍ FirstRanker.com ---

10. Differentiate closed loop and open loop control.

SECTION-B

11. A reaction was carried out in a batch reactor and the results are reported below. Calculate the rate of the reaction.
    

    Time, t (min)	0	10.0	30.0
    % Conversion	19.8	46.7	74.0

12. List various advantages and disadvantages of :
    1. Feed forward control system and

    --- Content provided by​ FirstRanker.com ---

    2. Feed Backward control system.
13. A plug flow reactor (2000 litre) processes an aqueous feed (100 litre per min) containing reactant A (Cao = 100 millimol/litre). This reaction is reversible and represented by A? R -r_A =(0.04min^-1)C_A -(0.01min^-1)C_R;
    Find the equilibrium conversion and the actual conversion of A in the reactor.
14. What are the factors affecting dynamic response of mercury thermometer?

--- Content provided by‌ FirstRanker.com ---

15. What is calibration? State the methods for calibrating the measuring instrument.

SECTION-C

16. Reactant A (A ? R, Cao = 26 mol/m³), passes in steady flow through four equally size mixed flow reactors in series (t_i =2min). When steady state is achieved the concentration of A is found to be 11, 5, 2, 1 mol/m³ in the four units, For this reaction, what must be t_plug so as to reduce C_A0 from C_A0 =26 to C_Af=1 mol/m³?
17. Define Semi-batch reactors. And state the advantages and disadvantages of batch reactor.
18. What are the desirable and undesirable properties of an instrument? How these properties help in choosing the right instrument for a particular measurement?

--- Content provided by​ FirstRanker.com ---

NOTE : Disclosure of Identity by writing Mobile No. or Making of passing request on any page of Answer Sheet will lead to UMC against the Student.