Download JNTU Kakinada (Jawaharlal Nehru Technological University, Kakinada) B-Tech 1-1 Sem, 1-2 Sem, 2-1 Sem, 2-2 Sem, 3-1 Sem, 3-2 Sem, 4-1 And 4-2 Sem EEE Course Structure And Detailed Syllabus R13
ACADEMIC REGULATIONS
COURSE STRUCTURE
AND
DETAILED SYLLABUS
ELECTRICAL AND
ELECTRONICS
E
NGINEERING
For
B.Tech., FOUR YEAR DEGREE COURSE
(Applicable for the batches admitted from 2013-14)
JAWAHARLAL NEHRU TECHNOLOGICAL
UNIVERSITY KAKINADA
KAKINADA ? 533003, ANDHRA PRADESH, INDIA.
Electrical and Electronics Engineering
2
Electrical and Electronics Engineering
3
Academic Regulations (R13) for B. Tech. (Regular)
Applicable for the students of B. Tech. (Regular) from the Academic
Year 2013-14 onwards
1. Award of B. Tech. Degree
A student will be declared eligible for the award of B. Tech. Degree if he
fulfils the following academic regulations :
1. A student shall be declared eligible for the award of the B. Tech
Degree, if he pursues a course of study in not less than four and not
more than eight academic years.
2. The candidate shall register for 180 credits and secure all the 180
credits.
2. Courses of study
The following courses of study are offered at present as specializations
for the B. Tech. Courses :
S.No.
Branch
01
Electronics and Communication Engineering
02
Electrical and Electronics Engineering
03
Civil Engineering
04
Mechanical Engineering
05
Computer Science and Engineering
06
Petro Chemical Engineering
07
Information Technology
08
Chemical Engineering
09
Electronics and Instrumentation Engineering
10
Bio-Medical Engineering
11
Aeronautical Engineering
12
Automobile Engineering
13
Bio Technology
14
Electronics and Computer Engineering
15
Mining Engineering
16
Petroleum Engineering
17
Metallurgical Engineering
18
Agricultural Engineering
Electrical and Electronics Engineering
4
3.
Distribution and Weightage of Marks
(i)
The performance of a student in each semester shall be evaluated
subject ? wise with a maximum of 100 marks for theory subject and
75 marks for practical subject. The project work shall be evaluated for
200 marks.
(ii)
For theory subjects the distribution shall be 30 marks for Internal
Evaluation and 70 marks for the End - Examinations.
(iii) For theory subjects, during the semester there shall be 2 tests. The
weightage of Internal marks for 30 consists of Descriptive ? 15,
Assignment - 05 (Theory, Design, Analysis, Simulation, Algorithms,
Drawing, etc. as the case may be) Objective -10 (Conducted at
College level with 20 Multiple choice question with a weightage of ?
Mark each). The objective examination is for 20 minutes duration.
The subjective examination is for 90 minutes duration conducted for
15 marks. Each subjective type test question paper shall contain 3
questions and all questions need to be answered. The Objective
examination conducted for 10 marks and subjective examination
conducted for 15 marks are to be added to the assignment marks of 5
for finalizing internal marks for 30. The best of the two tests will be
taken for internal marks. As the syllabus is framed for 6 units, the 1st
mid examination (both Objective and Subjective) is conducted in 1-3
units and second test in 4-6 units of each subject in a semester.
(iv)
The end semester examination is conducted covering the topics of all
Units for 70 marks. Part ? A contains a mandatory question
(Brainstorming / Thought provoking / case study) for 22 marks. Part ?
B has 6 questions (One from each Unit). The student has to answer 3
out of 6 questions in Part ? B and carries a weightage of 16 marks
each.
(v)
For practical subjects there shall be continuous evaluation during the
semester for 25 internal marks and 50 end examination marks. The
internal 25 marks shall be awarded as follows: day to day work - 10
marks, Record-5 marks and the remaining 10 marks to be awarded by
conducting an internal laboratory test. The end examination shall be
conducted by the teacher concerned and external examiner.
(vi)
For the subject having design and / or drawing, (such as Engineering
Graphics, Engineering Drawing, Machine Drawing) and estimation,
the distribution shall be 30 marks for internal evaluation ( 20 marks
for day ? to ? day work, and 10 marks for internal tests) and 70 marks
for end examination. There shall be two internal tests in a Semester
and the better of the two shall be considered for the award of marks
for internal tests.
Electrical and Electronics Engineering
5
(vii) For the seminar, the student shall collect the information on a
specialized topic and prepare a technical report, showing his
understanding over the topic, and submit to the department, which
shall be evaluated by the Departmental committee consisting of Head
of the department, seminar supervisor and a senior faculty member.
The seminar report shall be evaluated for 50 marks. There shall be no
external examination for seminar.
(viii) Out of a total of 200 marks for the project work, 60 marks shall be for
Internal Evaluation and 140 marks for the End Semester Examination.
The End Semester Examination (Viva ? Voce) shall be conducted by
the committee. The committee consists of an external examiner, Head
of the Department and Supervisor of the Project. The evaluation of
project work shall be conducted at the end of the IV year. The Internal
Evaluation shall be on the basis of two seminars given by each student
on the topic of his project and evaluated by an internal committee.
(ix)
Laboratory marks and the internal marks awarded by the College are
not final. The marks are subject to scrutiny and scaling by the
University wherever felt desirable. The internal and laboratory marks
awarded by the College will be referred to a Committee. The
Committee shall arrive at a scaling factor and the marks will be scaled
as per the scaling factor. The recommendations of the Committee are
final and binding. The laboratory records and internal test papers shall
be preserved in the respective departments as per the University norms
and shall be produced to the Committees of the University as and
when they ask for.
4.
Attendance Requirements
1.
A student is eligible to write the University examinations if he
acquires a minimum of 75% of attendance in aggregate of all the
subjects.
2.
Condonation of shortage of attendance in aggregate up to 10%
(65% and above and below 75%) in each semester may be
granted by the College Academic Committee
3.
Shortage of Attendance below 65% in aggregate shall not be
condoned.
4.
A student who is short of attendance in semester may seek re-
admission into that semester when offered within 4 weeks from
the date of the commencement of class work.
5.
Students whose shortage of attendance is not condoned in any
semester are not eligible to write their end semester examination
of that class.
Electrical and Electronics Engineering
6
6.
A stipulated fee shall be payable towards condonation of
shortage of attendance.
7.
A student will be promoted to the next semester if he satisfies the
(i)attendance requirement of the present semester and (ii) credits.
8.
If any candidate fulfills the attendance requirement in the present
semester, he shall not be eligible for readmission into the same
class.
5.
Minimum Academic Requirements
The following academic requirements have to be satisfied in addition
to the attendance requirements mentioned in item no. 4.
5.1
A student is deemed to have satisfied the minimum academic
requirements if he has earned the credits allotted to each
theory/practical design/drawing subject/project and secures not
less than 35% of marks in the end semester exam, and minimum
40% of marks in the sum total of the internal marks and end
semester examination marks.
5.2
A student shall be promoted from first year to second year if he fulfills
the minimum attendance requirement.
5.3
A student will be promoted from II year to III year if he fulfills the
academic requirement of 40% of the credits up to II year I semester
from all the examinations, whether or not the candidate takes the
examinations and secures prescribed minimum attendance in II
year II semester.
5.4
A student shall be promoted from III year to IV year if he fulfils the
academic requirements of 40% of the credits up to III year I
semester from all the examinations, whether or not the candidate
takes the examinations and secures prescribed minimum
attendance in III year II semester.
5.5
A student shall register and put up minimum attendance in all 180
credits and earn all 180 credits. Marks obtained in all the 180
credits shall be considered for the calculation of percentage of
marks.
6.
Course pattern
1. The entire course of study is for four academic years, all the years
are on semester pattern.
2. A student eligible to appear for the end semester examination in a
subject, but absent from it or has failed in the end semester
examination, may write the exam in that subject when conducted
next.
Electrical and Electronics Engineering
7
3. When a student is detained for lack of credits / shortage of
attendance, he may be re-admitted into the same semester / year
in which he has been detained. However, the academic
regulations under which he was first admitted shall continues to
be applicable to him.
7.
Award of Class
After a student has satisfied the requirements prescribed for the
completion of the program and is eligible for the award of B. Tech.
Degree, he shall be placed in one of the following four classes:
Class Awarded
% of marks to be secured
First Class with 70% and above
From the
Distinction
aggregate
marks
First Class
Below 70 but not less than 60%
secured
from 180
Second Class
Below 60% but not less than 50%
Credits.
Pass Class
Below 50% but not less than 40%
The marks obtained in internal evaluation and end semester
examination shall be shown separately in the memorandum of marks.
8.
Minimum Instruction Days
The minimum instruction days for each semester shall be 90 working
days.
9.
There shall be no branch transfers after the completion of the
admission process.
10.
There shall be no transfer from one college/stream to another within
the Constituent Colleges and Units of Jawaharlal Nehru Technological
University Kakinada.
11.
WITHHOLDING OF RESULTS
If the student has not paid the dues, if any, to the university or if any
case of indiscipline is pending against him, the result of the student
will be withheld. His degree will be withheld in such cases.
Electrical and Electronics Engineering
8
12. TRANSITORY
REGULATIONS
1.
Discontinued or detained candidates are eligible for readmission
as and when next offered.
2.
In case of transferred students from other Universities, the credits
shall be transferred to JNTUK as per the academic regulations
and course structure of the JNTUK.
13.
General
1.
Wherever the words "he", "him", "his", occur in the regulations,
they include "she", "her", "hers".
2. The academic regulation should be read as a whole for the
purpose of any interpretation.
3.
In case of any doubt or ambiguity in the interpretation of the
above rules, the decision of the Vice-Chancellor is final.
4.
The University may change or amend the academic regulations
or syllabi at any time and the changes or amendments made shall
be applicable to all the students with effect from the dates
notified by the University.
5.
The students seeking transfer to colleges affiliated to JNTUK
from various other Universities/ Institutions have to pass the
failed subjects which are equivalent to the subjects of JNTUK,
and also pass the subjects of JNTUK on their own without the
right to sessional marks which the candidates have not studied at
the earlier Institution.
* * * *
Electrical and Electronics Engineering
9
Academic Regulations (R13) for B. Tech.
(Lateral entry Scheme)
Applicable for the students admitted into II year B. Tech. from the Academic
Year 2014-15 onwards
1 Award of B. Tech. Degree
A student will be declared eligible for the award of B. Tech. Degree if he
fulfils the following academic regulations:
1.1 A student shall be declared eligible for the award of the B. Tech
Degree, if he pursues a course of study in not less than three
academic years and not more than six academic years.
1.2 The candidate shall register for 132 credits and secure all the 132
credits.
2.
The attendance regulations of B. Tech. (Regular) shall be applicable to
B.Tech.
3.
Promotion Rule
A student shall be promoted from second year to third year if he
fulfills the minimum attendance requirement.
A student shall be promoted from III year to IV year if he fulfils the
academic requirements of 40% of the credits up to III year I semester
from all the examinations, whether or not the candidate takes the
examinations and secures prescribed minimum attendance in III year
II semester.
4.
Award of Class
After a student has satisfied the requirement prescribed for the
completion of the program and is eligible for the award of B. Tech.
Degree, he shall be placed in one of the following four classes:
Class Awarded
% of marks to be secured
From
the
aggregate
First Class with 70% and above
marks secured
Distinction
from 132
First Class
Below 70% but not less than 60%
Credits from II
Second Class
Below 60% but not less than 50%
year to IV
Pass Class
Below 50% but not less than 40%
year.
The marks obtained in the internal evaluation and the end semester
examination shall be shown separately in the marks memorandum.
5.
All the other regulations as applicable to B. Tech. 4-year degree
course (Regular) will hold good for B. Tech. (Lateral Entry
Scheme).
Electrical and Electronics Engineering
10
MALPRACTICES RULES
Disciplinary Action for / Improper Conduct in Examinations
Nature of Malpractices /
Punishment
Improper conduct
If the candidate:
Possesses or keeps accessible in Expulsion from the examination
examination hall, any paper, note hall and cancellation of the
book, programmable calculators, Cell performance in that subject only.
phones, pager, palm computers or any
other form of material concerned with
1.
or related to the subject of the
(a)
examination (theory or practical) in
which he is appearing but has not
made use of (material shall include
any marks on the body of the
candidate which can be used as an aid
in the subject of the examination)
Gives assistance or guidance or Expulsion from the examination
receives it from any other candidate hall and cancellation of the
orally or by any other body language performance in that subject only of
(b)
methods or communicates through all the candidates involved. In case
cell phones with any candidate or of an outsider, he will be handed
persons in or outside the exam hall in over to the police and a case is
respect of any matter.
registered against him.
Has copied in the examination hall Expulsion from the examination
from any paper, book, programmable hall and cancellation of the
calculators, palm computers or any performance in that subject and all
other form of material relevant to the other subjects the candidate has
subject of the examination (theory or already appeared including practical
practical) in which the candidate is examinations and project work and
2.
appearing.
shall not be permitted to appear for
the remaining examinations of the
subjects of that Semester/year.
The Hall Ticket of the candidate
is to be cancelled and sent to the
University.
Impersonates any other candidate in The candidate who has
connection with the examination.
impersonated shall be expelled
from examination hall. The
candidate is also debarred and
3.
forfeits the seat. The performance
of the original candidate who has
been impersonated, shall be
cancelled in all the subjects of the
Electrical and Electronics Engineering
11
examination (including practicals
and project work) already appeared
and shall not be allowed to appear
for examinations of the remaining
subjects of that semester/year. The
candidate is also debarred for two
consecutive semesters from class
work and all University
examinations. The continuation of
the course by the candidate is
subject to the academic regulations
in connection with forfeiture of
seat. If the imposter is an outsider,
he will be handed over to the police
and a case is registered against him.
Smuggles in the Answer book or Expulsion from the examination
additional sheet or takes out or hall and cancellation of
arranges to send out the question performance in that subject and all
paper during the examination or the other subjects the candidate has
4.
answer book or additional sheet, already appeared including practical
during or after the examination.
examinations and project work and
shall not be permitted for the
remaining examinations of the
subjects of that semester/year. The
candidate is also debarred for two
consecutive semesters from class
work and all University
examinations. The continuation of
the course by the candidate is
subject to the academic regulations
in connection with forfeiture of
seat.
Uses objectionable, abusive or Cancellation of the performance in
offensive language in the answer that subject.
5.
paper or in letters to the examiners or
writes to the examiner requesting him
to award pass marks.
Refuses to obey the orders of the In case of students of the college,
Chief Superintendent/Assistant ? they shall be expelled from
Superintendent / any officer on duty examination halls and cancellation
or misbehaves or creates disturbance of their performance in that subject
6.
of any kind in and around the and all other subjects the
examination hall or organizes a walk candidate(s) has (have) already
out or instigates others to walk out, or
appeared and shall not be permitted
threatens the officer-in charge or any to appear for the remaining
person on duty in or outside the examinations of the subjects of that
Electrical and Electronics Engineering
12
examination hall of any injury to his semester/year. The candidates also
person or to any of his relations are debarred and forfeit their seats.
whether by words, either spoken or In case of outsiders, they will be
written or by signs or by visible handed over to the police and a
representation, assaults the officer-in-
police case is registered against
charge, or any person on duty in or them.
outside the examination hall or any of
his relations, or indulges in any other
act of misconduct or mischief which
result in damage to or destruction of
property in the examination hall or
any part of the College campus or
engages in any other act which in the
opinion of the officer on duty
amounts to use of unfair means or
misconduct or has the tendency to
disrupt the orderly conduct of the
examination.
Leaves the exam hall taking away Expulsion from the examination
answer script or intentionally tears of hall and cancellation of
the script or any part thereof inside or
performance in that subject and all
outside the examination hall.
the other subjects the candidate has
already appeared including practical
examinations and project work and
shall not be permitted for the
remaining examinations of the
7.
subjects of that semester/year. The
candidate is also debarred for two
consecutive semesters from class
work and all University
examinations. The continuation of
the course by the candidate is
subject to the academic regulations
in connection with forfeiture of
seat.
Possess any lethal weapon or firearm Expulsion from the examination
in the examination hall.
hall and cancellation of the
performance in that subject and all
other subjects the candidate has
already appeared including practical
8.
examinations and project work and
shall not be permitted for the
remaining examinations of the
subjects of that semester/year. The
candidate is also debarred and
forfeits the seat.
Electrical and Electronics Engineering
13
If student of the college, who is not a Student of the colleges expulsion
candidate for the particular
from the examination hall and
examination or any person not cancellation of the performance in
connected with the college indulges that subject and all other subjects
in any malpractice or improper the candidate has already appeared
conduct mentioned in clause 6 to 8.
including practical examinations
and project work and shall not be
9.
permitted for the remaining
examinations of the subjects of that
semester/year. The candidate is also
debarred and forfeits the seat.
Person(s) who do not belong
to the College will be handed over
to police and, a police case will be
registered against them.
Comes in a drunken condition to the Expulsion from the examination
examination hall.
hall and cancellation of the
performance in that subject and all
other subjects the candidate has
10.
already appeared including practical
examinations and project work and
shall not be permitted for the
remaining examinations of the
subjects of that semester/year.
Copying detected on the basis of Cancellation of the performance in
internal evidence, such as, during that subject and all other subjects
valuation or during special scrutiny.
the candidate has appeared
11.
including practical examinations
and project work of that
semester/year examinations.
If any malpractice is detected which
is not covered in the above clauses 1
12.
to 11 shall be reported to the
University for further action to award
suitable punishment.
Malpractices identified by squad or special invigilators
1.
Punishments to the candidates as per the above guidelines.
2.
Punishment for institutions : (if the squad reports that the college is
also involved in encouraging malpractices)
(i)
A show cause notice shall be issued to the college.
(ii)
Impose a suitable fine on the college.
(iii)
Shifting the examination centre from the college to another college for
a specific period of not less than one year.
* * * * *
Electrical and Electronics Engineering
14
JAWAHARLAL NEHRU TECHNOLOGICAL
UNIVERSITY: KAKINADA
KAKINADA-533003, Andhra Pradesh (India)
For Constituent Colleges and Affiliated Colleges of JNTUK
Ragging
Prohibition of ragging in
educational institutions Act 26 of 1997
Salient Features
Ragging within or outside any educational institution is prohibited.
Ragging means doing an act which causes or is likely to cause Insult
or Annoyance of Fear or Apprehension or Threat or Intimidation or
outrage of modesty or Injury to a student
Imprisonment upto
Fine Upto
Teasing,
Embarrassing &
6 Months
Rs. 1,000/-
+
Humiliation
Assaulting or Using
Criminal force or
1 Year
Rs. 2,000/-
+
Criminal intimidation
Wrongful y restraining
or confining or
2 Years
Rs. 5,000/-
+
causing hurt
Causing grievous hurt,
kidnapping or Abducts
or rape or co mmitting
5 Y
ears + Rs. 10,000/-
unnatural offence
Causing death or
10 Mo
nths + Rs. 50,000/-
abetting suicide
In Case of Emergency CALL TOLL FREE No. : 1800 - 425 - 1288
LET US MAKE JNTUK A R
AGGING FREE UNIVERSITY
Electrical and Electronics Engineering
15
JAWAHARLAL NEHRU TECHNOLOGICAL
UNIVERSITY: KAKINADA
KAKINADA-533003, Andhra Pradesh (India)
For Constituent Colleges and Affiliated Colleges of JNTUK
Ragging
ABSOLUTELY
NOT TO RAGGING
1. Ragging is prohibited as per Act 26 of A.P. Legislative
Assembly, 1997.
2. Ragging entails heavy fines and/or imprisonment.
3. Ragging invokes suspension and dismissal from the
College.
4. Outsiders are prohibited from entering the College and
Hostel without permission.
5. Girl students must be in their hostel rooms by 7.00 p.m.
6. All the students must carry their Identity Cards and
show them when demanded
7. The Principal and the Wardens may visit the Hostels and
inspect the rooms any time.
Jawaharlal Nehru Technological University Kakinada
For Constituent Colleges and Affiliated Colleges of JNTUK
In Case of Emergency CALL TOLL FREE No. : 1800 - 425 - 1288
LET US MAKE JNTUK A RAGGING FREE UNIVERSITY
Electrical and Electronics Engineering
16
COURSE STRUCTURE
I Year ? I SEMESTER
S. No.
Subject
T
P
Credits
1
English - I
3+1
--
3
2
Mathematics - I
3+1
--
3
Mathematics ? II (Mathematical Methods 3+1 --
3
3
)
4 Engineering
Physics
3+1
-- 3
5
Professional Ethics and Human Values
3+1
--
3
6
Engineering Drawing
3+1
--
3
7
English ? Communication Skills Lab - I
--
3
2
8
Engineering Physics Laboratory
--
3
2
9
Engineering Physics ? Virtual Labs -
-- 2 --
Assignments
10
Engineering Workshop & IT Workshop
--
3
2
Total Credits
24
I Year ? II SEMESTER
S. No.
Subject
T
P
Credits
1
English ? II
3+1
--
3
2
Mathematics ? III
3+1
--
3
3
Engineering Chemistry
3+1
--
3
4 Engineering
Mechanics
3+1
-- 3
5
Electrical Circuit Analysis - I
3+1
--
3
6
Computer Programming
3+1
--
3
7
Engineering Chemistry Lab
--
3
2
8
English ? Communication Skills Lab - II
--
3
2
9
C Programming lab
--
3
2
Total Credits
24
II Year ? I SEMESTER
S. No.
Subject
T
P
Credits
1 Electrical
Circuit
Analysis-II
3+1
-- 3
2
Thermal and Hydro Prime movers
3+1
--
3
3
Basic Electronics And Devices
3+1
--
3
Electrical and Electronics Engineering
17
Complex Variables and Statistical
4
3+1 --
3
Methods
5
Electro Magnetic Fields
3+1
--
3
6 Electrical
Machines-I
3+1
-- 3
7
Thermal and Hydro Lab
--
3
2
8 Electrical
Circuits
Lab
-- 3 2
Total Credits
22
II Year ? II SEMESTER
S. No.
Subject
T
P
Credits
1 Environmental
studies
3+1
-- 3
2
Switching Theory and Logic Design
3+1
--
3
3
Pulse & Digital Circuits
3+1
--
3
4 Power
Systems-I
3+1
-- 3
5 Electrical
Machines-II
3+1
-- 3
6 Control
Systems
3+1
-- 3
7
Electrical Machines -I Lab
--
3
2
8
Electronic Devices & Circuits Lab
--
3
2
Total Credits
22
III Year ? I SEMESTER
S. No.
Subject
T
P
Credits
Managerial Economics and Financial
3+1 --
3
1
Analysis
2 Electrical
Measurements
3+1 --
3
3 Power
Systems-II
3+1 --
3
4 Electrical
Machines-III
3+1
-- 3
5 Power
Electronics
3+1 --
3
6
Linear & Digital IC Applications
3+1 --
3
7
Electrical Machines-II Lab
--
3
2
8 Control
Systems
Lab
-- 3 2
9
IPR & Patents
3+1
2
Total Credits
24
III Year ? II SEMESTER
S. No.
Subject
T
P
Credits
1
Switchgear and Protection
3+1
--
3
Electrical and Electronics Engineering
18
2
Microprocessors & Microcontrollers
3+1 --
3
3
Utilization of Electrical Energy
3+1 --
3
4 Power
System
Analysis
3+1
-- 3
5
Power Semiconductor Drives
3+1 --
3
6
Management Science
3+1 --
3
7
Power Electronics Lab
--
3
2
8 Electrical
Measurements
Lab
-- 3 2
Total Credits
22
IV Year ? I SEMESTER
S. No.
Subject
T
P
Credits
1
Renewable Energy Sources and Systems
3+1
-
3
2
HVAC & DC Transmission
3+1
-
3
3
Power System Operation & Control
3+1
-
3
4
Open Elective
3+1 -
3
5
Elective ? I
3+1 -
3
6
Microprocessors & Microcontrollers Lab
-
3
2
7 Electrical
Simulation
Lab
- 3 2
8
Power systems lab
3
2
Total Credits
21
IV Year ? II SEMESTER
S. No.
Subject
T
P
Credits
1 Digital
Control
Systems
3+1
- 3
2
Elective ? II
3+1 -
3
3
Elective ? III
3+1 -
3
4
Elective ? IV
3+1 -
3
5 Project
- - 9
Total Credits
21
Open Elective:
1. Energy Audit, Conservation and Management
2. Instrumentation
3. Non Conventional Sources of Energy
4. Optimization Techniques
Electrical and Electronics Engineering
19
Elective ? I:
1. VLSI Design
2. Electrical Distribution Systems
3. Optimization Techniques
Elective ? II:
1. Advanced Control Systems
2. Extra High Voltage Transmission
3. Special Electrical Machines
Elective ? III:
1. Electric Power Quality
2. Digital Signal Processing
3. FACTS: Flexible Alternating Current Transmission Systems.
Elective-IV:
1. OOPS Through Java
2. UNIX and Shell Programming
3. AI Techniques
4. Power System Reforms
5. Systems Engineering
Electrical and Electronics Engineering
20
SYLLABUS
T P C
I Year ? I SEMESTER
3+1 0 3
ENGLISH ?I
(Common to All Branches)
DETAILED TEXT-I English Essentials : Recommended Topics :
1. IN LONDON: M.K.GANDHI
OBJECTIVE: To apprise the learner how Gandhi spent a period of
three years in London as a student.
OUTCOME: The learner will understand how Gandhi grew in
introspection and maturity.
2. THE KNOWLEDGE SOCIETY- APJ KALAM
OBJECTIVE: To make the learners rediscover India as a land of
Knowledge.
OUTCOME: The learners will achieve a higher quality of life, strength
and sovereignty of a developed nation.
3. THE SCIENTIFIC POINT OF VIEW- J.B.S. HALDANE
OBJECTIVE: This essay discusses how scientific point of view seeks
to arrive at the truth without being biased by emotion.
OUTCOME: This develops in the student the scientific attitude to solve
many problems which we find difficult to tackle.
4. PRINCIPLES OF GOOD WRITING:
OBJECTIVE: To inform the learners how to write clearly and logically.
OUTCOME: The learner will be able to think clearly and logically and
write clearly and logically.
5. MAN'S PERIL
OBJECTIVE: To inform the learner that all men are in peril.
OUTCOME: The learner will understand that all men can come
together and avert the peril.
6. THE DYING SUN--SIR JAMES JEANS
OBJECTIVE: This excerpt from the book "The Mysterious Universe"
presents the mysterious nature of the Universe and the stars which
present numerous problems to the scientific mind. Sir James Jeans uses a
poetic approach to discuss the scientific phenomena.
Electrical and Electronics Engineering
21
OUTCOME: This provides the students to think about the scientific
phenomena from a different angle and also exposes the readers to poetic
expressions.
7. LUCK--MARK TWAIN
OBJECTIVE: This is a short story about a man's public image and his
true nature. The theme of the story is that luck can be a factor of life, so
that even if one is incompetent but lucky, one can still succeed.
OUTCOME: The story is humourous in that it contains a lot of irony.
Thus this develops in the learner understand humourous texts and use of
words for irony.
Text Book : `English Essentials' by Ravindra Publications
NON-DETAILED TEXT:
(From Modern Trailblazers of Orient Blackswan)
(Common single Text book for two semesters)
1. G.D.Naidu
OBJECTIVE: To inspire the learners by G.D.Naidu's example of
inventions and contributions.
OUTCOME: The learner will be in a position to emulate G.D.Naidu
and take to practical applications.
2. G.R.Gopinath
OBJECTIVE: To inspire the learners by his example of inventions.
OUTCOME: Like G.R.Gopinath, the learners will be able to achieve
much at a low cost and help the common man.
3. Sudhamurthy
OBJECTIVE: To inspire the learners by the unique interests and
contributions of Sudha Murthy.
OUTCOME: The learner will take interest in multiple fields of
knowledge and make life worthwhile through social service.
4. Vijay Bhatkar
OBJECTIVE: To inspire the learner by his work and studies in different
fields of engineering and science.
OUTCOME: The learner will emulate him and produce memorable
things.
Text Book : `Trail Blazers' by Orient Black Swan Pvt. Ltd. Publishers
Electrical and Electronics Engineering
22
T P C
I Year ? I SEMESTER
3+1 0 3
MATHEMATICS ? I (DIFFERENTIAL EQUATIONS)
(Common to All Branches)
UNIT I: Differential equations of first order and first degree:
Linear-Bernoulli-Exact-Reducible to exact.
Applications : Newton's Law of cooling-Law of natural growth and decay-
orthogonal trajectories.
Subject Category
ABET Learning Objectives a d e
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
UNIT II: Linear differential equations of higher order:
Non-homogeneous equations of higher order with constant coefficients with
RHS term of the type e ax , Sin ax, cos ax, polynomials in x, e ax V(x), xV(x).
Applications: LCR circuit, Simple Harmonic motion
Subject Category
ABET Learning Objectives a d e
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
UNIT III Laplace transforms:
Laplace transforms of standard functions-ShiftingTheorems, Transforms of
derivatives and integrals ? Unit step function ?Dirac's delta function- Inverse
Laplace transforms? Convolution theorem (with out proof).
Application: Solutions of ordinary differential equations using Laplace
transforms.
Subject Category
ABET Learning Objectives a e
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
UNIT IV Partial differentiation:
Introduction- Total derivative-Chain rule-Generalized Mean Value theorem
for single variable (without proof)-Taylors and Mc Laurent's series for two
variables? Functional dependence- Jacobian.
Electrical and Electronics Engineering
23
Applications: Maxima and Minima of functions of two variables with
constraints and without constraints.
Subject Category
ABET Learning Objectives a c e
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
UNIT V First order Partial differential equations:
Formation of partial differential equations by elimination of arbitrary
constants and arbitrary functions ?solutions of first order linear (Lagrange)
equation and nonlinear (standard type) equations
Subject Category
ABET Learning Objectives a e
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
UNIT VI Higher order Partial differential equations:
Solutions of Linear Partial differential equations with constant coefficients-
Method of separation of Variables
Applications: One- dimensional Wave, Heat equations - two-dimensional
Laplace Equation.
Subject Category
ABET Learning Objectives a e
ABET internal assessments 1 2 6
JNTUK External Evaluation B E
Books:
1. B.S.GREWAL, Higher Engineering Mathematics, 42nd Edition,
Khanna Publishers
2. ERWIN KREYSZIG, Advanced Engineering Mathematics, 9th
Edition, Wiley-India
3. GREENBERG, Advanced Engineering Mathematics, 2nd edition,
Pearson edn
4. DEAN G. DUFFY, Advanced engineering mathematics with
MATLAB, CRC Press
5. PETER O'NEIL, advanced Engineering Mathematics, Cengage
Learning.
Electrical and Electronics Engineering
24
ABET
JNTUK
Subject
ABET Learning
Rema
Internal
External
Category
Objectives
-rks
Assessments
Evaluation
a) Apply knowledge of
math, science, &
engineering
b) Design & conduct
A. Questions
experiments, analyze
1.
should
& interpret data
Objective
have:
c) Design a
tests
B. Definition
system/process to
2.
Essay
s,
meet desired needs
questions
Principle
within economic,
tests
of
social, political,
3.
Peer
operation
ethical, health/safety,
tutoring
or
manufacturability,
based
philosoph
& sustainability
4.
Simulatio
y of
constraints
n based
concept.
d) Function on
5.
Design
C. Mathemati
Theory
multidisciplinary
oriented
cal
teams
6.
Problem
Design
treatment,
e) Identify, formulate,
based
Analysis
derivation
& solve engineering
7.
Experient
Algorithm
s, analysis,
problems
ial
synthesis,
s
f) Understand
(project
numerical
Drawing
professional &
based)
problems
Others
ethical
based
with
responsibilities
8.
Lab work
inference.
g) Communicate
or field
D. Design
effectively
work
oriented
h) Understand impact
based
problems
of engineering
9.
Presentat
E. Trouble
solutions in global,
ion based
shooting
economic,
10. Case
type of
environmental, &
Studies
questions
societal context
based
F.
Applicatio
i) Recognize need for
11. Role-
ns related
& be able to engage
play
questions
in lifelong learning
based
G. Brain
j) Know contemporary
12. Portfolio
storming
issues
based
questions
k) Use techniques,
skills, modern tools
for engineering
practices
Electrical and Electronics Engineering
25
T P C
I Year ? I SEMESTER
3+1 0 3
MATHEMATICS ? II
(MATHEMATICAL METHODS)
(Common to All Branches)
UNIT I Solution of Algebraic and Transcendental Equations:
Introduction- Bisection Method ? Method of False Position ? Iteration
Method ? Newton-Raphson Method (One variable and Simultaneous
Equations)
Subject Category
ABET Learning Objectives a e k
ABET internal assessments 1 2 4 6
JNTUK External Evaluation A B E
UNIT II Interpolation:
Introduction- Errors in Polynomial Interpolation ? Finite differences-
Forward Differences- Backward differences ?Central differences ? Symbolic
relations and separation of symbols-Differences of a polynomial-Newton's
formulae for interpolation ? Interpolation with unevenly spaced points ?
Lagrange's Interpolation formula
Subject Category
ABET Learning Objectives a e
ABET internal assessments 1 2 4 6
JNTUK External Evaluation A B E
UNIT III Numerical solution of Ordinary Differential equations:
Solution by Taylor's series-Picard's Method of successive Approximations-
Euler's Method-Runge-Kutta Methods
Subject Category
ABET Learning Objectives a e
ABET internal assessments 1 2 4 6
JNTUK External Evaluation A B E
UNIT IV Fourier Series:
Introduction- Determination of Fourier coefficients ? even and odd functions
?change of interval? Half-range sine and cosine series
application: Amplitude, spectrum of a periodic function
Electrical and Electronics Engineering
26
Subject Category
ABET Learning Objectives a e d
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
UNIT V Fourier Transforms:
Fourier integral theorem (only statement) ? Fourier sine and cosine integrals
? sine and cosine transforms ? properties ? inverse transforms ? Finite
Fourier transforms
Subject Category
ABET Learning Objectives a d e k
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
UNIT VI Z-transform:
Introduction? properties ? Damping rule ? Shifting rule ? Initial and final
value theorems ?Inverse z transform- -Convolution theorem ? Solution of
difference equation by Z ?transforms.
Subject Category
ABET Learning Objectives a b e k
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
BOOKS:
1. B.S. GREWAL, Higher Engineering Mathematics, 42nd Edition,
Khanna Publishers
2. DEAN G. DUFFY, Advanced Engineering Mathematics with
MATLAB, CRC Press
3. V.RAVINDRANATH and P. VIJAYALAXMI, Mathematical
Methods, Himalaya Publishing House
4. ERWYN KREYSZIG, Advanced Engineering Mathematics, 9th
Edition, Wiley-India
JNTUK
Subject
ABET Learning
ABET Internal
Rema
External
Category
Objectives
Assessments
-rks
Evaluation
a) Apply knowledge
1. Objective
A. Questions
of math, science,
tests
should
& engineering
2. Essay
have:
b) Design & conduct
questions
B. Definitions,
Electrical and Electronics Engineering
27
experiments,
tests
Principle of
Theory
analyze & interpret
3. Peer
operation or
Design
data
tutoring
philosophy
c) Design a
based
of concept.
Analysis
system/process to
4. Simulation
C. Mathematic
Algorithm
meet desired needs
based
al
s
within economic,
5. Design
treatment,
Drawing
social, political,
oriented
derivations,
Others
ethical,
6. Problem
analysis,
health/safety,
based
synthesis,
manufacturability,
7. Experiential
numerical
& sustainability
(project
problems
constraints
based)
with
d) Function on
based
inference.
multidisciplinary
8. Lab work
D. Design
teams
or field
oriented
e) Identify, formulate,
work based
problems
& solve
9. Presentatio
E. Trouble
engineering
n based
shooting
problems
10. Case
type of
f) Understand
Studies
questions
professional &
based
F. Application
ethical
11. Role-play
s related
responsibilities
based
questions
g) Communicate
12. Portfolio
G. Brain
effectively
based
storming
h) Understand impact
questions
of engineering
solutions in global,
economic,
environmental, &
societal context
i) Recognize need for
& be able to
engage in lifelong
learning
j) Know
contemporary
issues
k) Use techniques,
skills, modern
tools for
engineering
practices
Electrical and Electronics Engineering
28
T P C
I Year ? I SEMESTER
3+1 0 3
ENGINEERING PHYSICS
UNIT-I
PHYSICAL OPTICS FOR INSTRUMENTS
"Objective Designing an instrument and enhancing the resolution for its
operation would be effective as achieved through study of applicational
aspects of physical Optics"
INTERFACE : Introduction ? Interference in thin films by reflection ?
Newton's rings.
DIFFRACTION : Introduction ? Fraunhofer diffraction - Fraunhofer
diffraction at double slit (qualitative) ? Diffraction grating ? Grating
spectrum ? Resolving power of a grating ? Rayleigh's criterion for resolving
power.
POLARIZATION : Introduction ? Types of Polarization ? Double
refraction ? Quarter wave plate ad Half Wave plate.
UNIT-II
COHERENT OPTICS ? COMMUNICATIONS AND STRUCTURE OF
MATERIALS
Objectives while lasers are trusted Non-linear coherent sources established
for the fitness of instrumentation, establishing a structure property
relationship for materials requires allotment of an equivalent footing in
convening the physics knowledge base.
LASERS: Introduction ? coherent sources ? Characteristics of lasers ?
Spontaneous and Stimulated emission of radiation ? Einstein's coefficients ?
Population inversion ? Three and Four level pumping schemes ? Ruby laser
? Helium Neon laser.
FIBER OPTICS : Introduction ? Principle of Optical Fiber ? Acceptance
angle and acceptance cone ? Numerical aperture.
CRYSTALLOGRAPHY : Introduction ? Space lattice ? Basis ? Unit Cell ?
Lattice parameters ? Bravais lattices ? Crystal systems ? Structures and
packing fractions of SC,BCC and FCC
X-RAY DIFFRACTION TECHNIQUES : Directions and planes in
crystals ? Miller indices ? Separation between successive [h k l] planes ?
Bragg's law.
Electrical and Electronics Engineering
29
UNIT-III
MAGNETIC, ELECTRIC FIELD RESPONSE OF MATERIALS &
SUPERCONDUCTIVITY
"Objective many of the Electrical or Electronic gadgets are designed basing
on the response of naturally abundant and artificially made materials, while
their response to E- or H- fields controls their performance.
MAGNETIC PROPERTIES : Magnetic permeability ? Magnetization ?
Organ or magnetic moment ? Classification of Magnetic materials ? Dir,
para, Ferro, anti ferro and ferri-magnetism ? Hysteresis curve
DIELECTRIC PROPERTIES : Introduction ? Dielectric constant ?
Electronic, ionic and orientational polarization ? internal fields ? Clausius ?
Mossotti equation ? Dielectric loss, Breakdown and Strength.
SUPERCONDUCTIVITY : General properties ? Meissner effect ? Type I
and Type II superconductors ? BCS Theory Flux quantization London's
equations ? Penetration depth ? DC and AC Josephson effects ? SQUIDS.
UNIT ? IV
ACOUSTICS AND EM ? FIELDS:
Objective: The utility and nuances of ever pervading SHM and its
consequences would be the first hand-on to as it clearly conveyed through the
detailed studies of Acoustics of Buildings, while vectorial concepts of EM
fields paves the student to gear ? up for a deeper understanding.
ACOUSTICS: Sound absorption, absorption coefficient and its
measurements, Reverberations time ? Sabine's formula, Eyring's formula.
ELECTRO-MAGNETIC FIELDS: Gauss and stokes theorems (qualitative)
? Fundamental laws of electromagnetism ? Maxwell's Electromagnetic
Equations (Calculus approach).
UNIT ? V
QUANTUM MECHANICS FOR ELECTRONIC TRANSPORT
Objective: The discrepancy between classical estimates and laboratory
observations of physical properties exhibited by materials would be lifted out
through the understanding quantum picture of sub-atomic world dominated
by electron and its presence.
QUANTUM MECHANICS: Introduction to matter waves ? Schrodinger
Time Independent and Time Dependent wave equations ? Particle in a box.
FREE ELECTRON THEORY: Classical free electron theory ? electrical
conductivity ? Mean free path ? Relaxation time and drifty velocity ?
Quantum free electron theory ? Fermi ? Dirac (analytical) and its dependence
on temperature ? Fermi energy ? density of states ? derivations for current
density.
Electrical and Electronics Engineering
30
BAND THEORY OF SOLIDS: Bloch theorem (qualitative) ? Kronig ?
Penney model ? Origin of energy band formation in solids ? Classification of
materials into conductors, semi ? conductors & insulators ? Concepts of
effective mass of electron - concept of hole.
UNIT ? VI
SEMICONDUCTOR PHYSICS:
Objective: In the wake of ever increasing demand for the space and power
the watch word "small is beautiful", understanding the physics of electronic
transport as underlying mechanism for appliances would provide a
knowledge base.
Introduction ? Intrinsic semiconductor and carrier concentration ? Equation
for conductivity ? Extrinsic semiconductor and carrier concentration ? Drift
and diffusion ? Einstein's equation ? Hall Effect ? direct & indirect band gap
semiconductors ? Electronic transport Mechanism for LEDs, Photo
conductors and solar cells.
TEXT BOOKS
1. Solid state Physics by A.J. Dekker (Mc Millan India Ltd)
2. A text book of Engineering Physics by M.N. Avadhanulu & P.G.
Kshirasagar (S. Chand publications)
3. Engineering Physics b;y M.R. Srinivasan (New Age international
publishers)
REFERENCE BOOKS
1. `Introduction to solid state physics' by Charles Kittle (Willey India
Pvt.Ltd)
2. `Applied Physics' by T. Bhimasenkaram (BSP BH Publications )
3. `Applied Physics' by M.Arumugam (Anuradha Agencies)
4. `Engineering Physics' by Palanisamy (Scitech Publishers )
5. `Engineering Physics' by D.K.Bhattacharya (Oxford University
press)
6. `Engineering Physics' by Mani Naidu S (Pearson Publications)
7. `Engineering Physics' by Sanjay D Jain and Girish G Sahasrabudhe
(University Press)
8. `Engineering Physics' by B.K.Pandey & S. Chaturvedi (Cengage
Learning)
Electrical and Electronics Engineering
31
T P C
I Year ? I SEMESTER
3+1 0 3
Professional Ethics and Human Values
UNIT I : Human Values:
Morals, Values and Ethics ? Integrity ? Work Ethics ? Service Learning ?
Civic Virtue ? Respect for others ? Living Peacefully ? Caring ? Sharing ?
Honesty ?Courage ? Value time ? Co-operation ? Commitment ? Empathy ?
Self-confidence ? Spirituality- Character.
UNIT II : Engineering Ethics:
The History of Ethics-Purposes for Engineering Ethics-Engineering Ethics-
Consensus and Controversy ?Professional and Professionalism ?Professional
Roles to be played by an Engineer ?Self Interest, Customs and Religion-Uses
of Ethical Theories-Professional Ethics-Types of Inquiry ? Engineering and
Ethics-Kohlberg's Theory ? Gilligan's Argument ?Heinz's Dilemma.
UNIT III : Engineering as Social Experimentation:
Comparison with Standard Experiments ? Knowledge gained ?
Conscientiousness ? Relevant Information ? Learning from the Past ?
Engineers as Managers, Consultants, and Leaders ? Accountability ? Role of
Codes ? Codes and Experimental Nature of Engineering.
UNIT IV : Engineers' Responsibility for Safety and Risk:
Safety and Risk, Concept of Safety ? Types of Risks ? Voluntary v/s
Involuntary Risk- Short term v/s Long term Consequences- Expected
Probability- Reversible Effects- Threshold Levels for Risk- Delayed v/s
Immediate Risk- Safety and the Engineer ? Designing for Safety ? Risk-
Benefit Analysis-Accidents.
UNIT V : Engineers' Responsibilities and Rights:
Collegiality-Techniques for Achieving Collegiality ?Two Senses of Loyalty-
obligations of Loyalty-misguided Loyalty ? professionalism and Loyalty-
Professional Rights ?Professional Responsibilities ? confidential and
proprietary information-Conflict of Interest-solving conflict problems ? Self-
interest, Customs and Religion- Ethical egoism-Collective bargaining-
Confidentiality-Acceptance of Bribes/Gifts-when is a Gift and a Bribe-
examples of Gifts v/s Bribes-problem solving-interests in other companies-
Occupational Crimes-industrial espionage-price fixing-endangering lives-
Electrical and Electronics Engineering
32
Whistle Blowing-types of whistle blowing-when should it be attempted-
preventing whistle blowing.
UNIT VI : Global Issues:
Globalization- Cross-culture Issues-Environmental Ethics-Computer Ethics-
computers as the instrument of Unethical behaviour-computers as the object
of Unethical Acts-autonomous computers-computer codes of Ethics-
Weapons Development-Ethics and Research-Analysing Ethical Problems in
Research-Intellectual Property Rights.
********
Text Books:
1. "Engineering Ethics & Human Values" by M.Govindarajan,
S.Natarajan and V.S.SenthilKumar-PHI Learning Pvt. Ltd-2009
2. "Professional Ethics and Morals" by Prof.A.R.Aryasri, Dharanikota
Suyodhana-Maruthi Publications
3. "Professional Ethics and Human Values" by A.Alavudeen, R.Kalil
Rahman and M.Jayakumaran- Laxmi Publications
4. "Professional Ethics and Human Values" by Prof.D.R.Kiran-
5. "Indian Culture, Values and Professional Ethics" by PSR Murthy-
BS Publication
6. "Ethics in Engineering" by Mike W. Martin and Roland Schinzinger
? Tata McGraw-Hill ? 2003.
7. "Engineering Ethics" by Harris, Pritchard and Rabins, CENGAGE
Learning, India Edition, 2009.
Electrical and Electronics Engineering
33
T P C
I Year ? I SEMESTER
3+1 0 3
ENGINEERING DRAWING
Objective:
Engineering drawing being the principle method of communication for
engineers, the objective to introduce the students, the techniques of
constructing the various types of polygons, curves and scales. The objective
is also to visualize and represent the 3D objects in 2D planes with proper
dimensioning, scaling etc.
UNIT I
Objective: The objective is to introduce the use and the application of
drawing instruments and to make the students construct the polygons, curves
and various types of scales. The student will be able to understand the need
to enlarge or reduce the size of objects in representing them.
Polygons, Construction of regular polygons using given length of a side;
Ellipse, arcs of circles and Oblong methods; Scales ? Vernier and Diagonal
scales.
UNIT II
Objective: The objective is to introduce orthographic projections and to
project the points and lines parallel to one plane and inclined to other.
Introduction to orthographic projections; projections of points; projections of
straight lines parallel to both the planes; projections of straight lines ? parallel
to one plane and inclined to the other plane.
UNIT III
Objective: The objective is to make the students draw the projections of the
lines inclined to both the planes.
Projections of straight lines inclined to both the planes, determination of true
lengths, angle of inclinations and traces.
UNIT IV
Objective: The objective is to make the students draw the projections of the
plane inclined to both the planes.
Projections of planes: regular planes perpendicular/parallel to one plane and
inclined to the other reference plane; inclined to both the reference planes.
Electrical and Electronics Engineering
34
UNIT V
Objective: The objective is to make the students draw the projections of the
various types of solids in different positions inclined to one of the planes.
Projections of Solids ? Prisms, Pyramids, Cones and Cylinders with the axis
inclined to one of the planes.
UNIT VI
Objective: The objective is to represent the object in 3D view through
isometric views. The student will be able to represent and convert the
isometric view to orthographic view and vice versa.
Conversion of isometric views to orthographic views; Conversion of
orthographic views to isometric views.
TEXT BOOKS:
1. Engineering Drawing by N.D. Butt, Chariot Publications.
2. Engineering Drawing by K.L.Narayana & P. Kannaiah, Scitech
Publishers.
3. Engineering Graphics by PI Varghese, McGrawHill Publishers.
REFERENCE BOOKS:
1. Engineering Graphics for Degree by K.C. John, PHI Publishers.
2. Engineering Drawing by Agarwal & Agarwal, Tata McGraw
Hill Publishers.
3. Engineering Drawing + AutoCad ? K Venugopal, V. Prabhu
Raja, New Age.
Electrical and Electronics Engineering
35
T P C
I Year ? I SEMESTER
0 3 2
ENGLISH ? COMMUNICATION SKILLS LAB ? I
Suggested Lab Manuals:
OBJECTIVE: To impart to the learner the skills of grammar as well as
communication through listening, speaking, reading, and writing including
soft, that is life skills.
BASIC COMMUNICATION SKILLS
UNIT 1
A. Greeting and Introductions
B. Pure Vowels
UNIT 2
A. Asking for information and Requests
B. Diphthongs
UNIT 3
A. Invitations
B. Consonants
UNIT 4
A. Commands and Instructions
B. Accent and Rhythm
UNIT 5
A. Suggestions and Opinions
B. Intonation
Text Book:
`Strengthen your Communication Skills' Part-A by Maruthi
Publications
Reference Books:
1. INFOTECH English (Maruthi Publications)
2. Personality Development and Soft Skills ( Oxford University
Press, New Delhi)
Electrical and Electronics Engineering
36
T P C
I Year ? I SEMESTER
0 3 2
ENGINEERING PHYSICS LAB
List of Experiments
1. Determination of wavelength of a source-Diffraction Grating-
Normal incidence
2. Newton's rings ?Radius of Curvature of Plano_Convex Lens.
3. Determination of thickness of a thin object using parallel
interference fringes.
4. Determination of Rigidity modulus of a material- Torsional
Pendulum.
5. Determination of Acceleration due to Gravity and Radius of
Gyration- Compound Pendulum.
6. Melde's experiment ? Transverse and Longitudinal modes.
7. Verification of laws of stretched string ? Sonometer.
8. Determination of velocity of sound ? Volume resonator.
9. L C R Senes Resonance Circuit
10. Study of I/V Characteristics of Semiconductor diode
11. I/V characteristics of Zener diode
12. Thermistor characteristics ? Temperature Coefficient
13. Magnetic field along the axis of a current carrying coil ? Stewart
and Gee's apparatus.
14. Energy Band gap of a Semiconductor p.n junction.
15. Hall Effect for semiconductor.
REFERENCE:
1. Engineering Physics Lab Manual by Dr.Y. Aparna &
Dr.K.Venkateswarao (V.G.S.Book links)
2. Physics practical manual, Lorven Publications.
Electrical and Electronics Engineering
37
T P C
I Year ? I SEMESTER
0 3 2
Engineering Physics
Virtual Labs - Assignments
List of Experiments
1. Hall Effect
2. Crystal Structure
3. Hysteresis
4. Brewster's angle
5. Magnetic Levitation / SQUID
6. Numerical Aperture of Optical fiber
7. Photoelectric Effect
8. Simple Harmonic Motion
9. Damped Harmonic Motion
10. LASER ? Beam Divergence and Spot size
URL: WWW.vlab.co.in
Electrical and Electronics Engineering
38
T P C
I Year ? I SEMESTER
0 3 2
ENGINEERING WORKSHOP & IT WORKSHOP
ENGINEERING WORKSHOP:
Course Objective: To impart hands-on practice on basic engineering trades
and skills.
Note: At least two exercises to be done from each trade.
Trade:
Carpentry
1. T-Lap Joint
2.
Cross
Lap
Joint
3.
Dovetail
Joint
4. Mortise and Tennon Joint
Fitting
1. Vee Fit
2.
Square
Fit
3.
Half
Round
Fit
4.
Dovetail
Fit
Black Smithy
1. Round rod to Square
2.
S-Hook
3. Round Rod to Flat Ring
4. Round Rod to Square headed bolt
House Wiring
1. Parallel / Series Connection of three bulbs
2.
Stair
Case
wiring
3. Florescent Lamp Fitting
4. Measurement of Earth Resistance
Tin Smithy
1. Taper Tray
2. Square Box without lid
3.
Open
Scoop
4.
Funnel
IT WORKSHOP:
Objectives: Enabling the student to understand basic hardware and software
tools through practical exposure
Electrical and Electronics Engineering
39
PC Hardware:
Identification of basic peripherals, assembling a PC, installation of system
software like MS Windows, device drivers. Troubleshooting Hardware and
software _ some tips and tricks.
Internet & World Wide Web:
Different ways of hooking the PC on to the internet from home and
workplace and effectively usage of the internet, web browsers, email,
newsgroups and discussion forums .Awareness of cyber hygiene( protecting
the personal computer from getting infected with the viruses), worms and
other cyber attacks .
Productivity tools Crafting professional word documents; excel spread
sheets, power point presentations and personal web sites using the Microsoft
suite of office tools
(Note: Student should be thoroughly exposed to minimum of 12 Tasks)
PC Hardware
Task 1: Identification of the peripherals of a computer.
To prepare a report containing the block diagram of the CPU along with the
configuration of each peripheral and its functions. Description of various I/O
Devices
Task 2 (Optional) : A practice on disassembling the components of a PC
and assembling them to back to working condition.
Task 3: Examples of Operating systems- DOS, MS Windows, Installation of
MS windows on a PC.
Task 4: Introduction to Memory and Storage Devices , I/O Port, Device
Drivers, Assemblers, Compilers, Interpreters , Linkers, Loaders.
Task 5:
Hardware Troubleshooting (Demonstration):
Identification of a problem and fixing a defective PC(improper assembly or
defective peripherals).
Software Troubleshooting (Demonstration):. Identification of a problem
and fixing the PC for any software issues
Internet & Networking Infrastructure
Task 6: Demonstrating Importance of Networking, Transmission Media,
Networking Devices- Gateway, Routers, Hub, Bridge, NIC ,Bluetooth
Technology, Wireless Technology, Modem, DSL, Dialup Connection.
Orientation & Connectivity Boot Camp and web browsing: Students are
trained to configure the network settings to connect to the Internet. They are
Electrical and Electronics Engineering
40
trained to demonstrate the same through web browsing (including all tool bar
options) and email access.
Task 7: Search Engines & Netiquette:
Students are enabled to use search engines for simple search, academic
search and any other context based search (Bing, Google etc). Students are
acquainted to the principles of micro-blogging, wiki, collaboration using
social networks, participating in online technology forums
Task 8: Cyber Hygiene (Demonstration): Awareness of various threats on
the internet. Importance of security patch updates and anti-virus solutions.
Ethical Hacking, Firewalls, Multi-factor authentication techniques including
Smartcard, Biometrics are also practiced
Word
Task 9 : MS Word Orientation:
Accessing, overview of toolbars, saving files, Using help and resources,
rulers, formatting ,Drop Cap , Applying Text effects, Using Character
Spacing, OLE in Word, using templates, Borders and Colors, Inserting
Header and Footer, Using Date and Time option, security features in word,
converting documents while saving
Task 10: Creating project : Abstract Features to be covered:-Formatting
Styles, Inserting table, Bullets and Numbering, Changing Text Direction,
Cell alignment, Footnote, Hyperlink, Symbols, Spell Check , Track Changes,
Images from files and clipart, Drawing toolbar and Word Art, Formatting
Images, Textboxes and Paragraphs.
Excel
Task 11: Using spread sheet features of EXCEL including the macros,
formulae, pivot tables, graphical representations
Creating a Scheduler - Features to be covered:- Gridlines, Format Cells,
Summation, auto fill, Formatting Text
LOOKUP/VLOOKUP
Task 12: Performance Analysis - Features to be covered:- Split cells, freeze
panes, group and outline, Sorting, Boolean and logical operators, Conditional
formatting
Power Point
Task 13: Students will be working on basic power point utilities and tools
which help them create basic power point presentation. Topic covered during
this week includes :- PPT Orientation, Slide Layouts, Inserting Text, Word
Electrical and Electronics Engineering
41
Art, Formatting Text, Bullets and Numbering, Auto Shapes, Lines and
Arrows, Hyperlinks, Inserting ?Images, Clip Art, Tables and Charts in
Powerpoint.
Task 14: Focusing on the power and potential of Microsoft power point.
Helps them learn best practices in designing and preparing power point
presentation. Topic covered during this week includes: - Master Layouts
(slide, template, and notes), Types of views (basic, presentation, slide slotter,
notes etc), Inserting ? Background, textures, Design Templates, Hidden
slides, OLE in PPT.
TEXT BOOK:
Faculty to consolidate the workshop manuals using the following
references
1.
Computer Fundamentals, Anita Goel, Pearson
2.
Scott Mueller's Upgrading and Repairing PCs, 18/e, Scott. Mueller,
QUE, Pearson,2008
3.
Information Technology Workshop,3e, G Praveen Babu, M V
Narayana BS Publications.
4.
Comdex Information Technology , Vikas Gupta, dreamtech.
REFERENCE BOOK:
1.
Essential Computer and IT Fundamentals for Engineering and
Science Students, Dr. N.B. Venkateswarlu
Electrical and Electronics Engineering
42
T P C
I Year ? II SEMESTER
3+1 0 3
ENGLISH ?II
(Common to All Branches)
DETAILED TEXT-II :
Sure Outcomes: English for Engineers and Technologists
Recommended Topics :
1. TECHNOLOGY WITH A HUMAN FACE
OBJECTIVE: To make the learner understand how modern life has
been shaped by technology.
OUTCOME: The proposed technology is people's technology. It serves
the human person instead of making him the servant of machines.
2. CLIMATE CHANGE AND HUMAN STRATEGY
OBJECTIVE: To make the learner understand how the unequal heating
of earth's surface by the Sun, an atmospheric circulation pattern is
developed and maintained.
OUTCOME: The learner's understand that climate must be preserved.
3. EMERGING TECHNOLOGIES
OBJECTIVE: To introduce the technologies of the 20th century and 21st
centuries to the learners.
OUTCOME: The learner will adopt the applications of modern
technologies such as nanotechnology.
4. WATER- THE ELIXIR OF LIFE
OBJECTIVE: To inform the learner of the various advantages and
characteristics of water.
OUTCOME: The learners will understand that water is the elixir of life.
5. THE SECRET OF WORK
OBJECTIVE:: In this lesson, Swami Vivekananda highlights the
importance of work for any development.
OUTCOME: The students will learn to work hard with devotion and
dedication.
Electrical and Electronics Engineering
43
6. WORK BRINGS SOLACE
OBJECTIVE: In this lesson Abdul Kalam highlights the advantage of
work.
OUTCOME: The students will understand the advantages of work.
They will overcome their personal problems and address themselves to
national and other problems.
Text Book : `Sure Outcomes' by Orient Black Swan Pvt. Ltd. Publishers
NON-DETAILED TEXT:
(From Modern Trailblazers of Orient Blackswan)
(Common single Text book for two semesters)
5. J.C. Bose
OBJECTIVE: To apprise of J.C.Bose's original contributions.
OUTCOME: The learner will be inspired by Bose's achievements so
that he may start his own original work.
6. Homi Jehangir Bhaba
OBJECTIVE: To show Bhabha as the originator of nuclear experiments
in India.
OUTCOME: The learner will be inspired by Bhabha's achievements so
as to make his own experiments.
7. Vikram Sarabhai
OBJECTIVE: To inform the learner of the pioneering experiments
conducted by Sarabhai in nuclear energy and relevance of space
programmes.
OUTCOME: The learner will realize that development is impossible
without scientific research.
8. A Shadow- R.K.Narayan
OBJECTIVE: To expose the reader to the pleasure of the humorous
story.
OUTCOME: The learner will be in a position to appreciate the art of
writing a short story and try his hand at it.
Text Book : `Trail Blazers' by Orient Black Swan Pvt. Ltd. Publishers
Electrical and Electronics Engineering
44
T P
C
I Year ? II SEMESTER
3+1 0 3
MATHEMATICS ? III
(LINEAR ALGEBRA & VECTOR CALCULUS)
(Common to All Branches)
UNIT I Linear systems of equations:
Rank-Echelon form, Normal form ? Solution of Linear Systems ? Direct
Methods- Gauss Elimination - Gauss Jordon and Gauss Seidal Methods.
Application: Finding the current in a electrical circuit.
Subject Category
ABET Learning Objectives a e k
ABET internal assessments 1 2 6 4
JNTUK External Evaluation A B E
UNIT II Eigen values - Eigen vectors and Quadratic forms:
Eigen values - Eigen vectors? Properties ? Cayley-Hamilton Theorem -
Inverse and powers of a matrix by using Cayley-Hamilton theorem-
Quadratic forms- Reduction of quadratic form to canonical form ? Rank -
Positive, negative definite - semi definite - index ? signature.
Application: Free vibration of a two-mass system.
Subject Category
ABET Learning Objectives a d e k
ABET internal assessments 1 2 4 6
JNTUK External Evaluation A B E
UNIT III Multiple integrals:
Review concepts of Curve tracing (Cartesian - Polar and Parametric curves)-
Applications of Integration to Lengths, Volumes and Surface areas of
revolution in Cartesian and Polar Coordinates.
Multiple integrals - double and triple integrals ? change of variables ?
Change of order of Integration
Application: Moments of inertia
Subject Category
ABET Learning Objectives a e d
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
Electrical and Electronics Engineering
45
UNIT IV Special functions:
Beta and Gamma functions- Properties - Relation between Beta and Gamma
functions- Evaluation of improper integrals
Application: Evaluation of integrals
Subject Category
ABET Learning Objectives a e
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
UNIT V Vector Differentiation:
Gradient- Divergence- Curl - Laplacian and second order operators -Vector
identities
Application: Equation of continuity, potential surfaces
Subject Category
ABET Learning Objectives a e
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
UNIT VI Vector Integration:
Line integral ? work done ? Potential function ? area- surface and volume
integrals Vector integral theorems: Greens, Stokes and Gauss Divergence
Theorems (Without proof) and related problems.
application : work done, Force
Subject Category
ABET Learning Objectives a e
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
BOOKS:
1. GREENBERG, Advanced Engineering Mathematics, 9th Edition,
Wiley-India
2. B.V. RAMANA, Higher Engineering Mathematics, Tata
Mc Grawhill
3. ERWIN KREYSZIG, Advanced Engineering Mathematics, 9th
Edition, Wiley-India
4. PETER O'NEIL, Advanced Engineering Mathematics, Cengage
Learning
5. D.W. JORDAN AND T. SMITH, Mathematical Techniques,
Oxford University Press
Electrical and Electronics Engineering
46
JNTUK
Subject
ABET Learning
ABET Internal
Rema-
External
Category
Objectives
Assessments
rks
Evaluation
a) Apply knowledge of
math, science, &
engineering
b) Design & conduct
experiments, analyze
& interpret data
c) Design a
system/process to
A. Questions
1. Objective
meet desired needs
should have:
tests
within economic,
B. Definitions,
2. Essay
social, political,
Principle of
questions
ethical, health/safety,
operation or
tests
manufacturability,
philosophy
3. Peer tutoring
& sustainability
of concept.
based
constraints
C. Mathematica
4. Simulation
d) Function on
l treatment,
based
multidisciplinary
derivations,
5. Design
Theory
teams
analysis,
oriented
Design
e) Identify, formulate,
synthesis,
6. Problem
Analysis
& solve engineering
numerical
based
problems
problems
Algorithms
7. Experiential
f) Understand
with
Drawing
(project
professional &
inference.
Others
based) based
ethical
D. Design
8. Lab work or
responsibilities
oriented
field work
g) Communicate
problems
based
effectively
E. Trouble
9. Presentation
h) Understand impact
shooting type
based
of engineering
of questions
10. Case Studies
solutions in global,
F. Applications
based
economic,
related
11. Role-play
environmental, &
questions
based
societal context
G. Brain
12. Portfolio
i) Recognize need for
storming
based
& be able to engage
questions
in lifelong learning
j) Know contemporary
issues
k) Use techniques,
skills, modern tools
for engineering
practices
Electrical and Electronics Engineering
47
T P C
I Year ? II SEMESTER
3+1 0 3
ENGINEERING CHEMISTRY
UNIT-I: WATER TECHNOLOGY
Hard Water ? Estimation of hardness by EDTA method ? Potable water-
Sterilization and Disinfection ? Boiler feed water ? Boiler troubles ? Priming
and foaming , scale formation, corrosion, caustic embrittlement, turbine
deposits ? Softening of water ? Lime soda, Zeolite processes ? Reverse
osmosis ? Electro Dialysis, Ion exchange process
Objectives : For prospective engineers knowledge about water used in
industries (boilers etc.) and for drinking purposes is useful; hence chemistry
of hard water, boiler troubles and modern methods of softening hard water is
introduced.
UNIT-II : ELECTROCHEMISTRY
Concept of Ionic conductance ? Ionic Mobilities ? Applications of
Kohlrausch law ? Conductometric titrations ? Galvanic cells ? Electrode
potentials ? Nernst equation ? Electrochemical series ? Potentiometric
titrations ? Concentration cells ? Ion selective electrode ?Glass electrodes ?
Fluoride electrode; Batteries and Fuel cells
Objectives : Knowledge of galvanic cells, electrode potentials, concentration
cells is necessary for engineers to understand corrosion problem and its
control ; also this knowledge helps in understanding modern bio-sensors, fuel
cells and improve them.
UNIT-III : CORROSION
Causes and effects of corrosion ? theories of corrosion (dry, chemical and
electrochemical corrosion) ? Factors affecting corrosion ? Corrosion control
methods ? Cathodic protection ?Sacrificial Anodic, Impressed current
methods ? Surface coatings ? Methods of application on metals (Hot dipping,
Galvanizing, tinning , Cladding, Electroplating, Electroless plating) ?
Organic surface coatings ? Paints ? Their constituents and their functions.
Objectives : the problems associated with corrosion are well known and the
engineers must be aware of these problems and also how to counter them
UNIT-IV : HIGH POLYMERS
Types of Polymerization ? Stereo regular Polymers ? Physical and
Mechanical properties of polymers ? Plastics ? Thermoplastics and thermo
setting plastics ? Compounding and Fabrication of plastics ? Preparation and
Electrical and Electronics Engineering
48
properties of Polyethylene, PVC and Bakelite ? Elastomers ? Rubber and
Vulcanization ? Synthetic rubbers ? Styrene butadiene rubber ? Thiokol ?
applications.
Objectives : Plastics are materials used very widely as engineering materials.
An understanding of properties particularly physical and mechanical
properties of polymers / plastics / elastomers helps in selecting suitable
materials for different purposes.
UNIT-V : FUELS
Coal ? Proximate and ultimate analysis ? Numerical problems based on
analysis ? Calorific vaule ? HCV and LCV ? Problems based on calorific
values; petroleum ? Refining ? Cracking ? Petrol ? Diesel knocking; Gaseous
fuels ? Natural gas ? LPG, CNG ? Combustion ? Problems on air
requirements.
Objectives : A board understanding of the more important fuels employed on
a large scale is necessary for all engineer to understand energy ? related
problems and solve them.
UNIT-VI : CHEMISTRY OF ADVANCED MATERIALS
Nanometerials (Preparation of carbon nanotubes and fullerenes ? Properties
of nanomaterials ? Engineering applications) ? Liquid crystals (Types ?
Application in LCD and Engineering Applications) ? Fiber reinforced
plastics ? Biodegradable polymers ? Conducting polymers ? Solar cells
(Solar heaters ? Photo voltaic cells ? Solar reflectors ? Green house concepts
? Green chemistry (Methods for green synthesis and Applications) ? Cement
? Hardening and setting ? Deterioration of cement concrete
Objectives : With the knowledge available now, future engineers should
know at least some of the advanced materials that are becoming available.
Hence some of them are introduced here.
TEXT BOOKSS
1. Jain and Jain (Latest Edition), Engineering Chemistry, Dhanpat Rai
Publishing company Ltd,
2. N.Y.S.Murthy, V.Anuradha, KRamaRao "A Text Book of
Engineering Chemistry", Maruthi Publications
3. C.Parameswara Murthy, C.V.Agarwal, Adhra Naidu (2006) Text
Book of Engineering Chemistry, B.S.Publications
4. B.Sivasankar (2010), Engineering Chemistry, McGraw-Hill
companies.
Electrical and Electronics Engineering
49
5. Ch.Venkata Ramana Reddy and Ramadevi (2013), Engineering
Chemistry, Cengage Learning.
REFERENCES
1. S.S. Dara (2013) Text Book of Engineering Chemistry, S.Chand
Technical Series
2. K.Sesha Maheswaramma and Mridula Chugh (2013), Engineering
Chemistry, Pearson Publications.
3. R.Gopalan, D.Venkatappayya, Sulochana Nagarajan (2011), Text
Book of Engineering Chemistry, Vikas Publications.
4. B.Viswanathan and M.Aulice Scibioh (2009), Fuel Cells, Principals
and applications, University Press.
Electrical and Electronics Engineering
50
T P C
I Year ? II SEMESTER
3+1 0 3
ENGINEERING MECHANICS
Objectives:
The students completing this course are expected to understand the concepts
of forces and its resolution in different planes ,resultant of force system,
Forces acting on a body, their free body diagrams using graphical methods.
They are required to understand the concepts of centre of gravity and
moments of inertia and their application, Analysis of frames and trusses,
different types of motion, friction and application of work - energy method.
UNIT ? I
Objectives: The students are to be exposed to the concepts of force and
friction , direction and its application.
Introduction to Engg. Mechanics ? Basic Concepts.
Systems of Forces : Coplanar Concurrent Forces ? Components in Space ?
Resultant ? Moment of Force and its Application ? Couples and Resultant of
Force Systems. Introduction, limiting friction and impending motion,
coulomb's laws of dry friction , coefficient of friction, cone of friction
UNIT II
Objectives: The students are to be exposed to application of free body
diagrams. Solution to problems using graphical methods and law of
triangle of forces.
Equilibrium of Systems of Forces : Free Body Diagrams, Equations of
Equilibrium of Coplanar Systems, Spatial Systems for concurrent forces.
Lamis Theorm, Graphical method for the equilibrium of coplanar forces,
Converse of the law of Triangle of forces, converse of the law of polygon of
forces condition of equilibrium.
UNIT ? III
Objectives : The students are to be exposed to concepts of centre of
gravity.
Centroid : Centroids of simple figures (from basic principles ) ? Centroids of
Composite Figures
Centre of Gravity : Centre of gravity of simple body (from basis principles),
centre of gravity of composite bodies, pappus theorem.
Electrical and Electronics Engineering
51
UNIT IV
Objective: The students are to be exposed to concepts of moment of
inertia and polar moment of inertia including transfer methods and their
applications.
Area moments of Inertia : Definition ? Polar Moment of Inertia, Transfer
Theorem, Moments of Inertia of Composite Figures, Products of Inertia,
Transfer Formula for Product of Inertia. Mass Moment of Inertia : Moment
of Inertia of Masses, Transfer Formula for Mass Moments of Inertia, mass
moment of inertia of composite bodies.
UNIT ? V
Objectives : The students are to be exposed to motion in straight line and
in curvilinear paths, its velocity and acceleration computation and
methods of representing plane motion.
Kinematics : Rectilinear and Curvelinear motions ? Velocity and
Acceleration ? Motion of Rigid Body ? Types and their Analysis in Planar
Motion. Kinetics : Analysis as a Particle and Analysis as a Rigid Body in
Translation ? Central Force Motion ? Equations of Plane Motion ? Fixed
Axis Rotation ? Rolling Bodies.
UNIT ? VI
Objectives: The students are to be exposed to concepts of work, energy
and particle motion
Work ? Energy Method : Equations for Translation, Work-Energy
Applications to Particle Motion, Connected System-Fixed Axis Rotation and
Plane Motion. Impulse momentum method.
TEXT BOOKS:
1.
Engg. Mechanics - S.Timoshenko & D.H.Young., 4th Edn - , Mc
Graw Hill publications.
2.
Engineering Mechanics: Statics and Dynamics 3rd edition, Andrew
Pytel and Jaan Kiusalaas; Cengage Learning publishers.
REFERENCES:
1.
Engineering Mechanics statics and dynamics ? R.C.Hibbeler, 11th
Edn ? Pearson Publ.
2.
Engineering Mechanics , statics ? J.L.Meriam, 6th Edn ? Wiley India
Pvt Ltd.
Electrical and Electronics Engineering
52
3.
Engineering Mechanics, dynamics ? J.L.Meriam, 6th Edn ? Wiley
India Pvt Ltd.
4.
Engineering Mechanics, statics and dynamics ? I.H.Shames, ?
Pearson Publ.
5.
Mechanics For Engineers, statics - F.P.Beer & E.R.Johnston ? 5th
Edn Mc Graw Hill Publ.
6.
Mechanics For Engineers, dynamics - F.P.Beer & E.R.Johnston ? 5th
Edn Mc Graw Hill Publ.
7.
Theory & Problems of engineering mechanics, statics & dynamics ?
E.W.Nelson, C.L.Best & W.G. McLean, 5th Edn ? Schaum's outline
series - Mc Graw Hill Publ.
8.
Engineering Mechanics, Fedinand . L. Singer , Harper ? Collins.
9.
Engineering Mechanics statics and dynamics , A Nelson, Mc Graw
Hill publications
10. Engineering Mechanics, Tayal. Umesh Publ.
Electrical and Electronics Engineering
53
T P C
I Year ? II SEMESTER
3+1 0 3
ELECTRICAL CIRCUIT ANALYSIS ? I
Preamble:
This course introduces the basic concepts of circuit analysis which is the
foundation for all subjects of the Electrical Engineering discipline. The
emphasis of this course is laid on the basic analysis of circuits which includes
single phase circuits, magnetic circuits, network theorems, transient analysis
and network topology.
Objectives:
i.
To study the concepts of passive elements, types of sources and
various network reduction techniques.
ii.
To understand the behaviour of RLC networks for sinusoidal
excitations.
iii.
To study the performance of R-L, R-C and R-L-C circuits with
variation of one of the parameters and to understand the concept of
resonance.
iv.
To study the concept of magnetic coupled circuit.
v.
To understand the applications of network topology to electrical
circuits.
vi.
To understand the applications of network theorems for analysis of
electrical networks.
UNIT-I
Introduction to Electrical Circuits
Passive components and their V-I relations. Sources (dependent and
independent) - Kirchoff's laws, Network reduction techniques(series,
parallel, series - parallel, star-to-delta and delta-to-star transformation).
source transformation technique, nodal analysis and mesh analysis.
UNIT-II
Single Phase A.C Systems
Periodic waveforms (determination of rms, average value and form factor).
Concept of phase angle and phase difference.
Complex and polar forms of representations, steady state analysis of R, L and
C circuits.
Electrical and Electronics Engineering
54
Power Factor and its significance ? Real, Reactive power and apparent
Power.
UNIT-III
Resonance
Locus diagrams for various combination of R, L and C. Resonance, concept
of band width and Quality factor.
UNIT-IV
Magnetic Circuit
Basic definition of MMF, flux and reluctance. Analogy between electrical
and magnetic circuits.
Faraday's laws of electromagnetic induction Concept of self and mutual
inductance.
Dot convention-coefficient of coupling and composite magnetic circuit.
Analysis of series and parallel magnetic circuits.
UNIT-V
Network topology
Definitions of Graph and Tree. Basic cutset and tieset matrices for planar
networks. Loop and nodal methods of analysis of networks with dependent
and independent voltage and current sources. Duality and Dual networks.
UNIT-VI
Network theorems (DC & AC Excitations)
Superposition theorem, Thevenin's theorem, Norton's theorem, Maximum
Power Transfer theorem, Reciprocity theorem, Millman's theorem and
compensation theorem.
Outcomes:
Students are able to solve
i.
Various electrical networks in presence of active and passive
elements.
ii.
Any R, L, C network with sinusoidal excitation.
iii.
Any R, L, C network with variation of any one of the parameters i.e
R, L, C. and f.
iv.
Any magnetic circuit with various dot conventions.
v.
Electrical networks with network topology concepts.
vi.
Electrical networks by using principles of network theorems.
Electrical and Electronics Engineering
55
TEXT BOOKS:
1. Engineering Circuit Analysis by William Hayt and Jack
E.Kemmerley,Mc Graw Hill Company,6 th edition.
2. Network Analysis: Van Valkenburg; Prentice-Hall of India Private
Ltd.
REFERENCE BOOKS:
1. Introduction to Circuit Analysis and Design by Tildon Glisson. Jr,
Springer Publications.
2. Electric Circuit Analysis by K.S. Suresh Kumar, Pearson publications
3. Electric Circuits by David A. Bell, Oxford publications.
4. Introductory Circuit Analysis by Robert L Boylestad, Pearson
Publications.
5. Circuit Theory(Analysis and Synthesis) by A.chakrabarthi,Dhanpat
Rai&co.
Electrical and Electronics Engineering
56
T P C
I Year ? II SEMESTER
3+1 0 3
COMPUTER PROGRAMMING
Objectives:
Formulating algorithmic solutions to problems and
implementing algorithms in C
UNIT I:
Unit objective: Notion of Operation of a CPU, Notion of an algorithm
and computational procedure, editing and executing programs in Linux
Introduction: Computer systems, Hardware and Software Concepts,
Problem Solving: Algorithm / Pseudo code, flowchart, program
development steps, computer languages: machine, symbolic and highlevel
languages, Creating and Running Programs: Writing, Editing(vi/emacs
editor), Compiling(gcc), Linking and Executing in under Linux.
BASICS OF C: Structure of a C program, identifiers, basic data types and
sizes. Constants, Variables, Arthmetic , relational and logical operators,
increment and decrement operators, conditional operator, assignment
operator, expressions, type conversions, Conditional Expressions, precedence
and order of evaluation, Sample Programs.
UNIT II:
Unit objective: understanding branching, iteration and data
representation using arrays
SELECTION ? MAKING DECISION: TWO WAY SELECTION: if-else, null
else, nested if, examples, Multi-way selection: switch, else-if, examples.
ITERATIVE: loops- while, do-while and for statements , break, continue,
initialization and updating, event and counter controlled loops, Looping
applications: Summation, powers, smallest and largest.
ARRAYS: Arrays- concepts, declaration, definition, accessing elements,
storing elements, Strings and String Manipulations, 1-D arrays, 2-D arrays
and character arrays, string manipulations, Multidimensional arrays, array
applications: Matrix operations, checking the symmetricity of a Matrix.
STRINGS: concepts, c strings.
UNIT III:
Objective: Modular programming and recursive solution formulation
FUNCTIONS- MODULAR PROGRAMMING: functions, basics,
parameter passing, storage classes extern, auto, register, static, scope rules,
Electrical and Electronics Engineering
57
block structure, user defined functions, standard library functions, recursive
functions, Recursive solutions for fibonacci series, towers of Hanoi, header
files, C Preprocessor, example c programs, Passing 1-D arrays, 2-D arrays to
functions.
UNIT IV:
Objective: Understanding pointers and dynamic memory allocation
POINTERS: pointers- concepts, initialization of pointer variables, pointers
and function arguments, passing by address- dangling memory, address
arithmetic, character pointers and functions, pointers to pointers, pointers and
multi-dimensional arrays, dynamic memory management functions,
command
line
arguments
UNIT V:
Objective: Understanding miscellaneous aspects of C
ENUMERATED, STRUCTURE AND UNION TYPES: Derived types-
structures- declaration, definition and initialization of structures, accessing
structures, nested structures, arrays of structures, structures and functions,
pointers to structures, self referential structures, unions, typedef, bit-fields,
program applications
BIT-WISE OPERATORS: logical, shift, rotation, masks.
UNIT VI:
Objective: Comprehension of file operations
FILE HANDLING: Input and output- concept of a file, text files and binary
files, Formatted I/O, File I/O operations, example programs
Text Books:
1.
Problem Solving and Program Design in C, Hanly, Koffman, 7th ed,
PEARSON.
2. Programming in C, Second Edition Pradip Dey and Manas Ghosh,
OXFORD Higher Education.
3.
Programming in C, A practical approach Ajay Mittal PEARSON.
4.
The C programming Language by Dennis Richie and Brian Kernighan
5.
Programming in C, B. L. Juneja, Anith Seth, Cengage Learning.
Reference Books and web links:
1. C Programming, A Problem Solving Approach, Forouzan, Gilberg,
Prasad, CENGAGE
2.
Programming with C, Bichkar, Universities Press
3. Programming in C, Reema Thareja, OXFORD
4.
C by Example, Noel Kalicharan, Cambridge.
Electrical and Electronics Engineering
58
T P C
I Year ? II SEMESTER
0 3 2
ENGINEERING CHEMISTRY LABORATORY
List of Experiments
1. Introduction to chemistry laboratory ? Molarity, Normality,
Primary, Secondary standard solutions, Volumetric titrations,
Quantitative analysis, Quantitative analysis etc.,
2. Trial experiment ? Estimation of HCI using standard Na2co3
solutions
3. Estimation of KMnO4 using standard Oxalic acid solution.
4. Estimation of Ferric iron using standard K2Cr2O7 solution.
5. Estimation of Copper using standard K2Cr2O7 solution.
6. Estimation of Total Hardness water using standard EDTA solution.
7. Estimation of Copper using standard EDTA solution.
8. Estimation of Copper using Colorimeter
9. Estimation of pH of the given sample solution using pH meter.
10. Conductometric Titrations between strong acid and strong base
11. Conductometric Titrations between strong acid and Weak base
12. Potentiometric Titrations between strong acid and strong base
13. Potentiometric Titrations between strong acid and Weak base
14. Estimatinog of Zinc using standard potassium ferrocyanide solution
15. Estimation of Vitamin ? C
TEXT BOOKSS
1. Dr.Jyotsna Cherukuis(2012)Laboratory Manual of Engineering
Chemistry-II, VGS Techno Series
2. Chemistry Practical Manual, Lorven Publications
3. K. Mukkanti (2009) Practical Engineering Chemistry,
B.S.Publication
Electrical and Electronics Engineering
59
T P C
I Year ? II SEMESTER
0 3 2
ENGLISH ? COMMUNICATION SKILLS LAB ? II
Suggested Lab Manuals:
OBJECTIVE: To impart to the learner the skills of grammar as well as
communication through listening, speaking, reading, and writing including
soft, that is life skills.
ADVANCED COMMUNICATION SKILLS
UNIT 6
Body language
UNIT
7 Dialogues
UNIT 8
Interviews and Telephonic Interviews
UNIT 9
Group Discussions
UNIT 10
Presentation Skills
UNIT 11
Debates
Text Book:
`Strengthen your Communication Skills' Part-B by Maruthi Publications
Reference Books:
1. INFOTECH English (Maruthi Publications)
2. Personality Development and Soft Skills ( Oxford University
Press, New Delhi)
Electrical and Electronics Engineering
60
T P C
I Year ? II SEMESTER
0 3 2
C PROGRAMMING LAB
Exercise l
a) Write a C Program to calculate the area of triangle using the formula
area = ( s (s-a) (s-b)(s-c))1/2 where s= (a+b+c)/2
b) Write a C program to find the largest of three numbers using ternary
operator.
c) Write a C Program to swap two numbers without using a temporary
variable.
Exercise 2
a) 2's complement of a number is obtained by scanning it from right to left
and complementing all the bits after the first appearance of a 1. Thus 2's
complement of 11100 is 00100. Write a C program to find the 2's
complement of a binary number.
b) Write a C program to find the roots of a quadratic equation.
c) Write a C program, which takes two integer operands and one operator
form the user, performs the operation and then prints the result. (Consider
the operators +,-,*, /, % and use Switch Statement)
Exercise 3
a) Write a C program to find the sum of individual digits of a positive
integer and find the reverse of the given number.
b) A Fibonacci sequence is defined as follows: the first and second terms in
the sequence are 0 and 1. Subsequent terms are found by adding the
preceding two terms in the sequence. Write a C program to generate the
first n terms of the
c) Write a C program to generate all the prime numbers between 1 and n,
where n is a value supplied by the user.
Exercise 4
a) Write a C Program to print the multiplication table of a given number n
up to a given value, where n is entered by the user.
b) Write a C Program to enter a decimal number, and calculate and display
the binary equivalent of that number.
c) Write a C Program to check whether the given number is Armstrong
number or not.
Electrical and Electronics Engineering
61
Exercise 5
a) Write a C program to interchange the largest and smallest numbers in the
array.
b) Write a C program to implement a liner search.
c) Write a C program to implement binary search
Exercise 6
a) Write a C program to implement sorting of an array of elements .
b) Write a C program to input two m x n matrices, check the compatibility
and perform addition and multiplication of them
Exercise 7
Write a C program that uses functions to perform the following operations:
i.
To insert a sub-string in to given main string from a given
position.
ii.
To delete n Characters from a given position in a given string.
iii.
To replace a character of string either from beginning or ending
or at a specified location
Exercise 8
Write a C program that uses functions to perform the following operations
using Structure:
i) Reading a complex number
ii) Writing a complex number
iii) Addition of two complex numbers iv) Multiplication of two
complex numbers
Exercise 9
Write C Programs for the following string operations without using the built
in functions
- to concatenate two strings
- to append a string to another string
- to compare two strings
Exercise 10
Write C Programs for the following string operations without using the built
in functions
- to find t he length of a string
- to find whether a given string is palindrome or not
Electrical and Electronics Engineering
62
Exercise 11
a) Write a C functions to find both the largest and smallest number of an
array of integers.
b) Write C programs illustrating call by value and call by reference cncepts.
Exercise 12
Write C programs that use both recursive and non-recursive functions for the
following
i)
To find the factorial of a given integer.
ii) To find the GCD (greatest common divisor) of two given
integers.
iii) To find Fibonacci sequence
Exercise 13
a) Write C Program to reverse a string using pointers
b) Write a C Program to compare two arrays using pointers
Exercise 14
a) Write a C program consisting of Pointer based function to exchange
value of two integers using passing by address.
b) Write a C program to swap two numbers using pointers
Exercise 15
Examples which explores the use of structures, union and other user defined
variables
Exercise 16
a) Write a C program which copies one file to another.
b) Write a C program to count the number of characters and number of lines
in a file.
c) Write a C Program to merge two files into a third file. The names of the
files must be entered using command line arguments.
Electrical and Electronics Engineering
63
T P C
II Year ? I SEMESTER
3+1 0 3
ELECTRICAL CIRCUIT ANALYSIS-II
Preamble :
This course aims at study of three phase systems, transient analysis, network
synthesis and fourier analysis for the future study and analysis of power
systems.
Objectives:
i.
To study the concepts of balanced three-phase circuits.
ii.
To study the concepts of unbalanced three-phase circuits.
iii.
To study the transient behaviour of electrical networks with DC,
pulse and AC excitations.
iv.
To study the performance of a network based on input and output
excitation/response.
v.
To understand the realization of electrical network function into
electrical equivalent passive elements.
vi.
To understand the application of fourier series and fourier
transforms for analysis of electrical circuits.
UNIT-I Balanced Three phase circuits
Phase sequence- star and delta connection - relation between line and phase
voltages and currents in balanced systems - analysis of balanced three phase
circuits - measurement of active and reactive power in balanced three phase
systems.
UNIT-II Unbalanced Three phase circuits
Analysis of three phase unbalanced circuits: Loop method ? Star-Delta
transformation technique, Two wattmeter methods for measurement of three
phase power.
Electrical and Electronics Engineering
64
UNIT-III Transient Analysis in DC and AC circuits
Transient response of R-L, R-C, R-L-C circuits for DC and AC excitations,
Solution using differential equations and Laplace transforms.
UNIT-IV Two Port Networks
Two port network parameters ? Z, Y, ABCD and hybrid parameters and their
relations, Cascaded networks - poles and zeros of network functions.
UNIT-V Network synthesis
Positive real function - basic synthesis procedure - LC immittance functions -
RC impedance functions and RL admittance function - RL impedance
function and RC admittance function - Foster and Cauer methods.
UNIT-VI Fourier analysis and Transforms
Fourier theorem- Trigonometric form and exponential form of Fourier series,
Conditions of symmetry- line spectra and phase angle spectra, Analysis of
electrical circuits to non sinusoidal periodic waveforms.
Fourier integrals and Fourier transforms ? properties of Fourier transforms
and application to electrical circuits.
Outcomes:
i.
Students are able to solve three- phase circuits under balanced
condition.
ii.
Students are able to solve three- phase circuits under unbalanced
condition.
iii.
Students are able find out transient response of electrical networks
with different types of excitations.
iv.
Students are able to estimate the different types of two port network
parameters.
v.
Students are able to represent electrical equivalent network for a
given network transfer function.
vi.
Students are able to extract different harmonics components from
the response of a electrical network.
Electrical and Electronics Engineering
65
Text Books:
1. Engineering Circuit Analysis by William Hayt and Jack
E.Kemmerley, Mc Graw Hill Company,6 th edition
2. Network synthesis: Van Valkenburg; Prentice-Hall of India Private
Ltd
Reference Books:
1. Introduction to circuit analysis and design by Tildon Glisson. Jr,
Springer Publications
2. Circuits by A.Bruce Carlson , Cengage Learning Publications
3. Network Theory Analysis and Synthesis by Smarajit Ghosh, PHI
publications
4. Networks and Systems by D. Roy Choudhury, New Age
International publishers
5. Electric Circuits by David A. Bell, Oxford publications
6. Circuit Theory(Analysis and Synthesis) by A.chakrabarthi,Dhanpat
Rai&co.
Electrical and Electronics Engineering
66
T P C
II Year ? I SEMESTER
3+1 0 3
THERMAL AND HYDRO PRIME MOVERS
Part-A: Thermal prime movers
Course Objectives: To make the student understand the types of prime
movers, which can be connected to generators for power production and
should obtain the skills of performing the necessary calculations with respect
to the functioning of the prime movers.
UNIT I:
Objectives: To make the student learn about the constructional features,
operational details of various types of internal combustion engines through
the details of several engine systems and the basic air standard cycles, that
govern the engines. Further, the student shall be able to calculate the
performance of different types of internal combustion engines.
I.C Engines: Classification, working principles ? valve and port timing
diagrams ? air standard cycles ? Engine systems line fuel injection,
carburetion, ignition, cooling and lubrication ? Engine performance
evaluation.
UNIT II:
Objectives: To train the student in the aspects of steam formation and its
utilities through the standard steam data tables and charts. To make the
student correlate between the air standard cycles and the actual cycles that
govern the steam turbines. To train the student to calculate the performance
of steam turbines using velocity diagrams.
Properties of Steam and use of Steam Tables- T-S and H-S Diagrams.
Analysis of Various Thermodynamic Processes under gone by Steam.
Vapor Power Cycles: Carnot Cycle-Rankine Cycle- Thermodynamic
Variables Effecting Efficiency and output of Rankine Cycle-. Analysis of
simple Rankine Cycle and Re-heat cycle
Steam Turbines: Schematic layout of steam power plant Classification of
Steam Turbines- Impulse Turbine and Reaction Turbine- Compounding in
Turbines- Velocity Diagrams for simple Impulse and Reaction Turbines-
Work done & efficiency
Electrical and Electronics Engineering
67
UNIT III:
Objectives: To impart the knowledge of gas turbine fundamentals, the
governing cycles and the methods to improve the efficiency of gas turbines.
Gas Turbines: Simple gas turbine plant-ideal cycle, closed cycle -open
cycle-. Efficiency, Work ratio and optimum pressure ratio for simple gas
turbine cycle. Actual cycle, analysis of simple cycles & cycles with inter
cooling, reheating and Regeneration
Part-B: Hydro prime movers
UNIT IV:
Objectives: To teach the student about the fundamental of fluid
dynamic equations and its applications fluid jets. To impart the
knowledge of various types of pumps, their constructional features,
working and performance.
IMPACT OF JETS AND PUMPS: Impulse momentum equation, Impact of
Jet on stationary and moving vanes (flat and curved). Pumps: Types of
pumps, Centrifugal pumps: Main components, Working principle, Multi
stage pumps, Performance and characteristic curves
UNIT V:
Objectives: To make the student learn about the constructional features,
operational details of various types of hydraulic turbines. Further, the student
shall be able to calculate the performance of hydraulic turbines.
HYDRAULIC TURBINES: Classification of turbines; Working principle,
Efficiency calculation and Design principles for Pelton Wheel, Francis and
for Kaplan turbines; Governing of turbines; Performance and characteristic
curves.
UNIT VI:
Objectives: To train the student in the areas of types of hydro electric power
plants, estimation and calculation of different loads by considering various
factors.
HYDRO POWER: Components of Hydro electric power plant: pumped
storage systems, Estimation of water power potential; Estimation of load on
turbines: load curve, load factor, capacity factor, utilization factor, diversity
factor, load ? duration curve, firm power, secondary power, prediction of
load.
Electrical and Electronics Engineering
68
Text Books:
1. Thermal Engineering by Rajput, Lakshmi publications
2. Thermal engineering by M.L.Mathur and F.S.Mehta, Jain Brothers.
3. "Hydraulics & Fluid Mechanics", P.N. Modi and S.M. Seth, TEXT
BOOKS House, Delhi
4. "Fluid Mechanics & Hydraulic Machinery" A.K.Jain, , Khanna
Publishers, Delhi.
Reference Books:
1. "Fluid Mechanics" by Victor.L.Streeter
2. "Introduction to Fluid Mechanics" Edward .J. Shaughnessy Jr.
3. "Fluid Mechanics & Its Applications", Vijay Gupta,
Santhosh.k.Gupta
4. "Fluid Mechanics & Fluid power Engineering, Dr D.S.Kumar
5. "Water Power Engineering" M.M Desumukh
Electrical and Electronics Engineering
69
T P C
II Year ? I SEMESTER
3+1 0 3
BASIC ELECTRONICS AND DEVICES
Preamble: This course introduces the concepts of semi-conductor physics
and operation of various semi-conductor devices. Realization of rectifiers,
amplifiers and oscillators using semi-conductor devices and their analysis is
also introduced in this course.
Unit-I:
Objective: To learn the basics of semiconductor physics.
Review of Semi Conductor Physics: Insulators, Semi conductors, and
Metals classification using Energy Band Diagrams, Mobility and
Conductivity, Electrons and holes in Intrinsic Semi conductors, Extrinsic
Semi Conductor, (P and N Type semiconductor) Hall effect, Generation and
Recombination of Charges, Diffusion, Continuity Equation, Injected
Minority Carriers, Law of Junction, Introduction to fermi level in Intrinsic,
Extrinsic semi conductors with necessary mathematics
Outcome:
Students are able to understand the basic concepts of semiconductor physics,
which are useful to understand the operation of diodes and transistors.
Unit-II:
Objective:
To study the construction details, operation and characteristics of various
semiconductor diodes.
Junction Diode Characteristics
Operation and characteristics of p-n junction diode. Current components in p-
n diode, diode equation. Temperature dependence on V?I characteristic,
diffusion capacitance and diode resistance (static and dynamic), energy band
diagram of p-n diode.
Special Diodes: Avalanche and Zener break down, Zener characteristics,
tunnel diode, characteristics with the help of energy band diagrams, Varactor
diode, LED, PIN diode, Photo diode
Outcome:
Students are able to explain the operation and characteristics of PN junction
diode and special diodes.
Electrical and Electronics Engineering
70
Unit-III:
Objective:
To understand the operation and analysis of rectifiers with and without filters.
Further study the operation of series and shunt regulators using zener diodes.
Rectifiers and Regulators
Half wave rectifier, ripple factor, full wave rectifier (with and without
transformer), harmonic components in a rectifier circuit, inductor filter,
capacitor filter, L-section filter, - section filter, and comparison of various
filter circuits in terms of ripple factors. Simple circuit of a regulator using
Zener diode. Types of regulators-series and shunt voltage regulators, over
load voltage protection.
Outcome:
Ability to understand operation and design aspects of rectifiers and
regulators.
Unit-IV:
Objective:
To study the characteristics of different bipolar junction transistors and their
biasing stabilization and compensation techniques. To analyze transistor
amplifiers using h-parameters.
Transistors
Junction transistor, transistor current components, transistor as an amplifier
and switch. Characteristics of transistor (CE, CB and CC configurations).
Transistor biasing and thermal stabilization (to fixed bias, collector to base
bias, self bias). Compensation against variation in base emitter voltage and
collector current. Thermal runaway. Hybrid model of transistor. Analysis of
transistor amplifier using h-parameters
Outcome:
Students are able to understand the characteristics of various transistor
configurations. They become familiar with different biasing, stabilization and
compensation techniques used in transistor circuits.
Unit- V:
Objective:
To understand the basics of FET,Thyristors, Power IGBTs and Power
MOSFETs.
Electrical and Electronics Engineering
71
Power semiconductor devices
Principle of operation and characteristics of Thyristors, Silicon control
rectifiers, power IGBT and power MOSFET their ratings. Comparison of
power devices.
FET: JFET Characteristics (Qualitative explanation), MOFET
Characteristics?static and Transfer (enhancement and depletion mode), low
frequency model of FET, FET as an amplifier.
Outcome:
Students are able to understand the operation and characteristics of FET,
Thyristors, Power IGBTs and Power MOSFETs.
Unit VI :
Objective:
To understand the concepts of positive and negative feedbacks and their role
in amplifiers and oscillators.
Amplifiers and oscillators
Feedback Amplifiers -classification, feedback concept, transfer gain and
general characteristics of negative feedback amplifiers, effect of feedback on
input and output resistances. Methods of analysis of feedback amplifiers.
Power Amplifiers ? Classification, push-pull amplifiers, Introduction to
harmonics (distortion factor.
Oscillators ? Condition for oscillation, RC-phase shift oscillator. Wein bridge
oscillator, Crystal oscillator. Frequency and amplitude stability of oscillators.
Outcome:
Students are able to understand the merits and demerits of positive and
negative feedback and the role of feedback in oscillators and amplifiers.
TEXT BOOKS:
1. Electronic Devices and Circuits ? J. Millman, C.C. Halkias, Tata
Mc-Graw Hill
REFERENCE BOOKS:
1. Electronic Devices and Circuits by David A. Bell, Oxford
University Press
2. Electronic Devices and Circuits ? Salivahanan, Kumar, Vallavaraj,
TATA McGraw Hill, Second Edition
3. Electronic Devices and Circuits ? R.L. Boylestad and Louis
Nashelsky, Pearson/Prentice Hall, 9thEdition, 2006
Electrical and Electronics Engineering
72
T P C
II Year ? I SEMESTER
3+1 0 3
COMPLEX VARIABLE AND STATISTICAL METHODS
UNIT-I Functions of a complex variable:
Introduction ? Continuity ? Differentiability ? Analyticity ? Properties ?
Cauchy-Riemann equations in Cartesian and polar coordinates. Harmonic
and conjugate harmonic functions ? Milne ? Thompson method.
Subject Category
ABET Learning Objectives a e
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
UNIT-II Integration and Series Expansions
Complex integration: Line integral ? Cauchy's integral theorem , Cauchy's
integral formula, Generalized integral formula (all without proofs)-
Radius of convergence ? Expansion in Taylor's series, Maclaurin's series and
Laurent series.
Subject Category
ABET Learning Objectives a e k
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
UNIT III Integration using Residues:
Types of Singularities: Isolated , pole of order m, essential - Residues ?
Residue theorem( without proof) - Evaluation of real integrals of type (a)
(b) (c)
Subject Category
ABET Learning Objectives a e
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
UNIT IV Conformal Mapping:
Transformation by exp z, lnz, z^2, z^n(n positive integer), Sin z, cos z, z +
a/z- Translation, rotation, inversion and bilinear transformation ? fixed point
? cross ratio ? properties ? invariance of circles
Electrical and Electronics Engineering
73
Subject Category
ABET Learning Objectives a e k
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
UNIT V Sampling Distributions:
Review of Normal distribution - Population and samples - Sampling
distribution of mean (with known and unknown variance), proportion,
variances - Sampling distribution of sums and differences -Point and interval
estimators for means, variances, proportions.
Subject Category
ABET Learning Objectives a e k
ABET internal assessments 1 2 6
JNTUK External Evaluation A B E
UNIT VI Tests of Hypothesis
Type I and Type II errors -Maximum error- One tail, two-tail tests - Tests
concerning one mean and proportion, two means- Proportions and their
differences using Z-test, Student's t-test - F-test and Chi -square test.
Subject Category
ABET Learning Objectives a b d e h k
ABET internal assessments 1 2 6 7 10
JNTUK External Evaluation A B E F D
Books:
1. Advanced Engineering Mathematics: Erwin Kreyszig, Wiley India
Edition
2. Advanced Engineering Mathematics: Michael Greenberg, Pearson
3. Advanced Engineering Mathematics: BS Grewal , Khanna
Publishers (42nd Ed)
4. Probability and Statistics for Engineers: Miller and John E. Freund,
Prentice Hall of India
5. Probability and Statistics for Engineers and Scientists: Ronald E.
Walpole, Sharon L. Mayers and Keying Ye: Pearson
Electrical and Electronics Engineering
74
ABET
JNTUK
Subject
ABET Learning
Rem
Internal
External
Category
Objectives
a-rks
Assessments
Evaluation
a) Apply knowledge of
math, science, &
engineering
b) Design & conduct
experiments,
A. Questions
analyze & interpret
1. Objective
should
data
tests
have:
c) Design a
2. Essay
B. Definition
system/process to
questions
s,
meet desired needs
tests
Principle
within economic,
3. Peer
of
social, political,
tutoring
operation
ethical,
based
or
health/safety,
4. Simulatio
philosoph
manufacturability,
n based
y of
& sustainability
5. Design
concept.
constraints
oriented
C. Mathemati
d) Function on
Theory
6. Problem
cal
multidisciplinary
Design
based
treatment,
teams
Analysis
7. Experient
derivation
e) Identify, formulate,
Algorithm
ial
s, analysis,
& solve engineering
(project
synthesis,
s
problems
based)
numerical
Drawing
f) Understand
based
problems
Others
professional &
8. Lab work
with
ethical
or field
inference.
responsibilities
work
D. Design
g) Communicate
based
oriented
effectively
9. Presentat
problems
h) Understand impact
ion based
E. Trouble
of engineering
10. Case
shooting
solutions in global,
Studies
type of
economic,
based
questions
environmental, &
11. Role-
F. Applicatio
societal context
play
ns related
i) Recognize need for
based
questions
& be able to engage
12. Portfolio
G. Brain
in lifelong learning
based
storming
j) Know contemporary
questions
issues
k) Use techniques,
skills, modern tools
for engineering
practices
Electrical and Electronics Engineering
75
T P C
II Year ? I SEMESTER
3+1 0 3
ELECTROMAGNETIC FIELDS
Electromagnetic fields is the foremost pre-requisite course for most of
the subjects in Electrical Engineering. Either in the enunciation of basics of
electrical elements R, L and C that are the building blocks of any electrical
device or in the illustration of Energy transfer from mechanical to electrical
and vice versa its role is crucial. This course also includes the famous works
of Coulomb, Ampere, Faraday, Maxwell etc. to the field of Electrical
Engineering.
UNIT ? I Electrostatics:
Objective:
To study the production of electric field and potentials due to different
configurations of static charges.
Electrostatic Fields ? Coulomb's Law ? Electric Field Intensity (EFI) ? EFI
due to a line and a surface charge ? Work done in moving a point charge in
an electrostatic field ? Electric Potential ? Properties of potential function ?
Potential gradient ? Guass's law ?? Maxwell's first law, div( D )=v
Laplace's and Poison's equations and Solution of Laplace's equation in one
variable.
Outcome: Ability to calculate electric field and potentials using guass's law
or solving Laplace's or Possion's equations.
UNIT ? II Conductors ? Dielectrics and Capacitance:
Objective :
To study the properties of conductors and dielectrics, calculate the
capacitance of different configu-various and understand the concept of
conduction and convection current densities.
Electric dipole ? Dipole moment ? potential and EFI due to an electric dipole
? Torque on an Electric dipole in an electric field ? Behaviour of conductors
in an electric field ? Conductors and Insulators
Polarization ? Boundary conditions between conduction to Dielectric and
dielectric to dielectrics capacitance ? capacitance of parallel plates, spherical
and coaxial cables with composite dielectrics ?Energy stored and energy
density in a static electric field ? Current density ? conduction and
Convection current densities ? Ohm's law in point form ? Equation of
continuity
Electrical and Electronics Engineering
76
Outcome: Learn how to calculate capacitance, energy stored in dielectrics
and get's the concept of conduction and convection currents
UNIT ? III Magneto statics and Ampere's Law:
Objective:
To study the magnetic fields produced by currents in different configurations,
application of ampere's law and the Maxwell's second and third equations.
Static magnetic fields ? Biot-Savart's law ? Oesterd's experiment - Magnetic
field intensity (MFI) ? MFI due to a straight current carrying filament ? MFI
due to circular, square and solenoid current ? Carrying wire ? Relation
between magnetic flux, magnetic flux density and MFI ? Maxwell's
second Equation, div(B)=0 ?Ampere's circuital law and its applications viz.
MFI due to an infinite sheet of current and a long filament carrying
conductor ? Point form of Ampere's circuital law ?Field due to a circular
loop, rectangular and square loops, Maxwell's third equation, Curl (H)=J.
Outcome:
Ability to find magnetic field intensity due to current, the application of
ampere's law and the Maxwell's second and third equations.
UNIT ? IV Force in Magnetic fields:
Objective :
To study the magnetic force and torque through Lorentz force equation in
magnetic field environment like conductors and other current loops.
Magnetic force - Moving charges in a Magnetic field ? Lorentz force
equation ? force on a current element in a magnetic field ? Force on a straight
and a long current carrying conductor in a magnetic field ? Force between
two straight long and parallel current carrying conductors ? Magnetic dipole
and dipole moment ? a differential current loop as a magnetic dipole ?
Torque on a current loop placed in a magnetic field.
Outcome:
Students can calculate the magnetic forces and torque produced by currents
in magnetic field
UNIT ? V Self and Mutual inductance:
Objective :
To develop the concept of self and mutual inductances and the energy stored.
Electrical and Electronics Engineering
77
Self and Mutual inductance ? determination of self-inductance of a solenoid
and toroid and mutual inductance between a straight long wire and a square
loop wire in the same plane ? energy stored and density in a magnetic field.
Outcome:
Will the able to calculate self and mutual inductances and the energy stored
in the magnetic field.
UNIT ? VI Time Varying Fields:
Objective :
To study time varying and Maxwell's equations in different forms and
Maxwell's fourth equation for the induced Emf.
Time varying fields ? Faraday's laws of electromagnetic induction ? Its
integral and point forms ? Maxwell's fourth equation, Curl (E)=-B/t ?
Statically and Dynamically induced EMFs ? Simple problems -Modification
of Maxwell's equations for time varying fields ? Displacement current ?
Poynting Theorem and Poynting vector.
Outcome:
Students will gain knowledge on time varying fields and get ability to
calculate induced Emf. Concepts of displacement current and Poynting vector
and associated problems are solved.
TEXT BOOKS:
1. "Engineering Electromagnetics" by William H. Hayt & John. A. Buck
Mc. Graw-Hill Companies, 7th Editon. 2006.
REFERENCE BOOKS
1. "Principles of Electro Magnetics" by Sadiku, Oxford Publications,4th
edition
2. "Introduction to Electro Dynamics" by D J Griffiths, Prentice-Hall of
India Pvt.Ltd, 2nd edition
3. "Electromagnetic Field Theory" by Yaduvir Singh,Pearson
4. Fundamentals of Engineering Electromagnetics by Sunil Bhooshan,
Oxford higher education
Electrical and Electronics Engineering
78
T P C
II Year ? I SEMESTER
3+1 0 3
ELECTRICAL MACHINES ? I
Preamble:
This is a basic course on rotating electrical machines. This course covers the
topics related to principles, performance, applications and design
considerations of dc machines.
Learning objectives:
i.
Appreciate the principles of electromagnetic energy conversion and
understand the construction details of DC machine.
ii.
Understand the principle of operation and performance of DC
generators.
iii.
Learn the characteristics and performance of DC generators.
iv.
Learn the characteristics and performance of DC motors.
v.
Learn the speed control and testing methods of DC motors.
vi.
Learn the basic ideas of design of DC machines.
UNIT?I:
Electromechanical Energy Conversion
Introduction to S.I Units - principles of electromechanical energy conversion
? forces and torque in magnetic field systems ? energy balance- singly
excited machine- magnetic force - co-energy ? multi excited magnetic field
system-construction features of conventional and modern DC machines.
UNIT?II:
D.C. Generators ? I
Principle of operation ? E.M.F equation- armature windings ? lap and wave
windings ? armature reaction ?cross magnetizing and de-magnetizing
AT/pole ?commutation process ? methods of improving commutation ?
compensating windings ? Interpoles.
UNIT?III:
D.C. Generators ? II
Methods of excitation- self excited and separately excited-types of generators
build-up of emf - open circuit characteristics-critical field resistance-critical
speed-causes for failure to self excitation-remedial measures ? Internal and
Electrical and Electronics Engineering
79
external characteristics of separately excited, shunt, series, compound
generators-applications, losses and efficiency.
UNIT?IV:
D.C. Motors
Principle of operation ? back E.M.F - torque equation ?characteristics of
shunt, series and compound motors ? armature reaction and commutation -
losses and efficiency- speed torque characteristics-applications of dc motors.
Starting by 3 point and 4 point starters ? protective devices.
UNIT-V:
Speed Control and Testing of D.C. Machines
Speed control by armature voltage and field flux control ? testing of DC
machines - brake test, Swinburne's method ? principle of regenerative or
Hopkinson's method - retardation test -- separation of losses ? methods of
electrical braking: plugging, dynamic and regenerative.
UNIT?VI:
Design of D.C. Machines
Design concept - output equation - choice of specific electric and magnetic
loadings ? separation of D and L - estimation of number of conductors/ turns
- coils - armature slots ? conductor dimension ? slot dimension - choice of
number of poles ? length of air gap.
Learning outcomes:
i.
Able to explain the concepts of electromagnetic energy conversion.
ii.
Able to explain the operation of dc generator, armature reaction and
commutation.
iii.
Able to analyze the characteristics and performance of dc
generators.
iv.
Able to explain the torque developed and performance of dc motors.
v.
Able to analyze the speed control and testing methods of dc motors.
vi.
Able to propose design aspects of a dc machine.
TEXT BOOKS:
1
Electrical Machines ? P.S. Bhimbra, Khanna Publishers
2. Electric Machinery by A.E.Fitzgerald,Charles kingsley,Stephen
D.Umans, TMH
Electrical and Electronics Engineering
80
REFERENCE BOOKS:
1. Theory & Performance of Electrical Machines by J.B.Guptha.
S.K.Kataria & Sons
2.
Electrical Machines by R.K.Rajput, Lakshmi publications,5th edition
3.
The Performance and Design of DC machines - Albert E. Clayton
4. Electrical Machine Design by A.K. Sawhney, Dhanpat Rai & Sons
publications
5. Electric Machines by Mulukutla S.Sarma&Mukesh k.Pathak,
CENGAGE Learning.
Electrical and Electronics Engineering
81
T P C
II Year ? I SEMESTER
0 3 2
THERMAL AND HYDRO LAB
Course Objective:
To impart practical knowledge on the performance evaluation methods of
various internal combustion engines, flow measuring equipment and
hydraulic turbines and pumps.
NOTE: TO CONDUCT A MINIMUM OF 12 EXPERIMENTS BY
CONDUCTING A MINIMUM OF SIX FROM EACH SECTION.
SECTION A - THERMAL ENGINEERING LAB
1. I.C. Engines valve / port timing diagrams.
2. I.C. Engines performance test on 4 -stroke Diesel engine.
3. I.C. Engines performance test on 2-stroke petrol engine.
4. Evaluation of engine friction by conducting Morse test on 4-stroke multi
cylinder petrol engine
5.
Determination of FHP by retardation and motoring test on IC engine
6. I.C. Engines heat balance on petrol / Diesel engines.
7. Economical speed test of an IC engine
8. Study of boilers
SECTION B ? HYDRAULIC MACHINES LAB
1. Impact of jets on Vanes.
2. Performance Test on Pelton Wheel.
3. Performance Test on Francis Turbine.
4. Performance Test on Kaplan Turbine.
5. Performance Test on Single Stage Centrifugal Pump.
6. Performance Test on Reciprocating Pump.
7. Calibration of Venturimeter.
8. Calibration of Orifice meter.
9. Determination of loss of head due to sudden contraction in a pipeline.
Electrical and Electronics Engineering
82
T P C
II Year ? I SEMESTER
0 3 2
ELECTRICAL CIRCUITS LAB
Any 10 of the following experiments are to be conducted:
1) Verification of Thevenin's and Norton's Theorems
2) Verification of Superposition theorem and Maximum Power
Transfer Theorem
3) Verification of Compensation Theorem
4) Verification of Reciprocity , Millmann's Theorems
5) Locus Diagrams of RL and RC Series Circuits
6) Series and Parallel Resonance
7) Determination of Self, Mutual Inductances and Coefficient of
coupling
8) Z and Y Parameters
9) Transmission and hybrid parameters
10) Measurement of Active Power for Star and Delta connected
balanced loads
11) Measurement of Reactive Power for Star and Delta connected
balanced loads
12) Measurement of 3-phase Power by two Wattmeter Method for
unbalanced loads
Electrical and Electronics Engineering
83
T P C
II Year ? II SEMESTER
3+1 0 3
ENVIRONMENTAL STUDIES
Course Learning Objectives:
The objectives of the course is to impart
1. Overall understanding of the natural resources
2. Basic understanding of the ecosystem and its diversity
3. Acquaintance on various environmental challenges induced due to
unplanned anthropogenic activities
4. An understanding of the environmental impact of developmental
activities
5. Awareness on the social issues, environmental legislation and global
treaties
Course Outcomes:
The student should have knowledge on
1. The natural resources and their importance for the sustenance of the
life and recognise the need to conserve the natural resources
2. The concepts of the ecosystem and its function in the environment.
The need for protecting the producers and consumers in various
ecosystems and their role in the food web
3. The biodiversity of India and the threats to biodiversity, and
conservation practices to protect the biodiversity
4. Various attributes of the pollution and their impacts and measures to
reduce or control the pollution along with waste management
practices
5. Social issues both rural and urban environment and the possible means
to combat the challenges
6. The environmental legislations of India and the first global initiatives
towards sustainable development.
7. About environmental assessment and the stages involved in EIA and
the environmental audit
Syllabus:
UNIT - I
Multidisciplinary nature of Environmental Studies: Definition, Scope and
Importance ?Sustainability: Stockholm and Rio Summit?Global
Electrical and Electronics Engineering
84
Environmental Challenges: Global warming and climate change, acid rains,
ozone layer depletion, population growth and explosion, effects. Role of
information Technology in Environment and human health.
Ecosystems: Concept of an ecosystem. - Structure and function of an
ecosystem. - Producers, consumers and decomposers. - Energy flow in the
ecosystem - Ecological succession. - Food chains, food webs and ecological
pyramids. - Introduction, types, characteristic features, structure and function
of Forest ecosystem, Grassland ecosystem, Desert ecosystem, Aquatic
ecosystems.
UNIT - II
Natural Resources: Natural resources and associated problems
Forest resources ? Use and over ? exploitation, deforestation ? Timber
extraction ? Mining, dams and other effects on forest and tribal people
Water resources ? Use and over utilization of surface and ground water ?
Floods, drought, conflicts over water, dams ? benefits and problems
Mineral resources: Use and exploitation, environmental effects of extracting
and using mineral resources
Food resources: World food problems, changes caused by non-agriculture
activities-effects of modern agriculture, fertilizer-pesticide problems, water
logging, salinity
Energy resources: Growing energy needs, renewable and non-renewable
energy sources use of alternate energy sources.
Land resources: Land as a resource, land degradation, Wasteland
reclamation, man induced landslides, soil erosion and desertification. Role of
an individual in conservation of natural resources. Equitable use of resources
for sustainable lifestyles.
UNIT - III
Biodiversity and its conservation: Definition: genetic, species and
ecosystem diversity- classification - Value of biodiversity: consumptive use,
productive use, social-Biodiversity at national and local levels. India as a
mega-diversity nation - Hot-sports of biodiversity - Threats to biodiversity:
habitat loss, man-wildlife conflicts. - Endangered and endemic species of
India ? Conservation of biodiversity: conservation of biodiversity.
UNIT - IV
Environmental Pollution: Definition, Cause, effects and control measures
of Air pollution, Water pollution, Soil pollution, Noise pollution, Nuclear
hazards. Role of an individual in prevention of pollution. - Pollution case
studies.
Electrical and Electronics Engineering
85
Solid Waste Management: Sources, classification, effects and control
measures of urban and industrial solid wastes. Consumerism and waste
products.
UNIT - V
Social Issues and the Environment: Urban problems related to energy -
Water conservation, rain water harvesting-Resettlement and rehabilitation of
people; its problems and concerns. Environmental ethics: Issues and possible
solutions. Environmental Protection Act -Air (Prevention and Control of
Pollution) Act. ?Water (Prevention and control of Pollution) Act -Wildlife
Protection Act -Forest Conservation Act-Issues involved in enforcement of
environmental legislation. -Public awareness.
UNIT - VI
Environmental Management: Impact Assessment and its significance
various stages of EIA, preparation of EMP and EIS, Environmental audit.
Ecotourism
The student should submit a report individually on any issues related to
Environmental Studies course and make a power point presentation.
Text Books:
1. Environmental Studies by R. Rajagopalan, 2nd Edition, 2011, Oxford
University Press.
2. A Textbook of Environmental Studies by Shaashi Chawla, TMH, New
Delhi
3. Environmental Studies by P.N. Palanisamy, P. Manikandan, A.
Geetha, and K. Manjula Rani; Pearson Education, Chennai
Reference:
1. Text Book of Environmental Studies by Deeshita Dave & P. Udaya
Bhaskar, Cengage Learning.
2. Environmental Studies by K.V.S.G. Murali Krishna, VGS Publishers,
Vijayawada
3. Environmental Studies by Benny Joseph, Tata McGraw Hill Co, New
Delhi
4. Environmental Studies by Piyush Malaviya, Pratibha Singh, Anoop
singh: Acme Learning, New Delhi
***
Electrical and Electronics Engineering
86
T P C
II Year ? II SEMESTER
3+1 0 3
SWITCHING THEORY AND LOGIC DESIGN
UNIT ? I
REVIEW OF NUMBER OF SYSTEMS & CODES:
i)
Representation of numbers of different radix, conversation from one
radix to another radix, r-1's compliments and r's compliments of
signed members, problem solving.
ii)
4 bit codes, BCD, Excess-3, 2421, 84-2-1 9's compliment code etc.,
iii) Logic operations and error detection & correction codes; Basic logic
operations -NOT, OR, AND, Universal building blocks, EX-OR,
EX-NOR - Gates, Standard SOP and POS, Forms, Gray code, error
detection, error correction codes (parity checking, even parity, odd
parity, Hamming code) NAND-NAND and NOR-NOR realizations.
UNIT ? II
MINIMIZATION TECHNIQUES:
Boolean theorems, principle of complementation & duality, De-morgan
theorems, minimization of logic functions using Boolean theorems,
minimization of switching functions using K-Map up to 6 variables, tabular
minimization, problem solving (code-converters using K-Map etc..).
UNIT ? III
COMBINATIONAL LOGIC CIRCUITS DESIGN :
Design of Half adder, full adder, half subtractor, full subtractor, applications
of full adders, 4-bit binary subtractor, adder-subtractor circuit, BCD adder
circuit, Excess 3 adder circuit, look-a-head adder circuit, Design of decoder,
demultiplexer, 7 segment decoder, higher order demultiplexing, encoder,
multiplexer, higher order multiplexing, realization of Boolean functions using
decoders and multiplexers, priority encoder, 4-bit digital comparator.
UNIT ? IV
INTRODUCTION OF PLD's :
PROM, PAL, PLA-Basics structures, realization of Boolean function with
PLDs, programming tables of PLDs, merits & demerits of PROM, PAL, PLA
comparison, realization of Boolean functions using PROM, PAL, PLA,
programming tables of PROM, PAL, PLA.
Electrical and Electronics Engineering
87
UNIT ? V
SEQUENTIAL CIRCUITS I:
Classification of sequential circuits (synchronous and asynchronous); basic
flip-flops, truth tables and excitation tables (nand RS latch, nor RS latch, RS
flip-flop, JK flip-flop, T flip-flop, D flip-flop with reset and clear terminals).
Conversion from one flip-flop to flip-flop. Design of ripple counters, design
of synchronous counters, Johnson counter, ring counter. Design of registers -
Buffer register, control buffer register, shift register, bi-directional shift
register, universal shift register.
UNIT ? VI
SEQUENTIAL CIRCUITS II :
Finite state machine; Analysis of clocked sequential circuits, state diagrams,
state tables, reduction of state tables and state assignment, design procedures.
Realization of circuits using various flip-flops. Meelay to Moore conversion
and vice-versa.
TEXT BOOKS:
1. Switching Theory and Logic Design by Hill and Peterson Mc-Graw
Hill TMH edition.
2. Switching Theory and Logic Design by A. Anand Kumar
3. Digital Design by Mano PHI.
REFERENCE BOOKS:
1. Modern Digital Electronics by RP Jain, TMH
2. Fundamentals of Logic Design by Charles H. Roth Jr, Jaico
Publishers
3. Micro electronics by Milliman MH edition.
Electrical and Electronics Engineering
88
T P C
II Year ? II SEMESTER
3+1 0 3
PULSE & DIGITAL CIRCUITS
UNIT-I
Linear Wave Shaping: High pass, low pass RC circuits-response to
sinusoidal, step, pulse,square and ramp inputs. RC circuit as differentiator
and integrator.
Attenuators: Basic attenuator circuit and compensated attenuator circuit.
Switching characteristics of devices:Diode as a switch, transistor as a
switch-transistor at cutoff, the reverse collector saturation current ICBO , Its
variation with the junction temperature. The transistor switch in saturation.
Design of transistor switch.
UNIT-II
Non linear wave shaping: Diode clippers, Transistor clipper, clippers at two
independent levels-transfer characteristics of clippers-emitter coupled
clipper, clamping operation, diode clamping circuits with source resistance
and diode resistance -transient and steady state response for a square wave
input, clamping circuit theorem-practical clamping circuit
UNIT-III
Multi vibrators:
Bistable multi vibrators:
A basic binary circtuit-explanation. Fixed-bias transistor binary,self-biased
transistor binary, binary with commutating capacitors-analysis.Non saturated
binary?symmetrical triggering, schmitttrigger circuit-emmitter coupled
binary circuit.
Monostable multi vibrator:
Basic circuit-collector coupled monostable multivibrator- emitter coupled
monostable multivibrator-triggering of monostable multivibrator.
Astable multi vibrator:
The Astable collector coupled multivibrator, the Astable emitter coupled
multivibrator.
UNIT-IV
Digital logic circuits:Introduction, positive and negative logic, Diode OR
gate, Diode AND gate, An inverter circuit with transistor, DTL, TTL, ECL,
Electrical and Electronics Engineering
89
AOI logic, NMOS logic, PMOS logic, CMOS logic-analysis and problem
solving.
NIT-V
Time base generators:
Voltage time base generators-Introduction, definitions of sweep speed
error, displacement error, transmission error, various methods of generating
time- base waveforms, UJT time base generator, transistor constant current
sweep.
Miller time base generators: General considerations, The miller sweep-
general considerations of bootstrap time base generator-basic principles,
transistor bootstrap time base generator.
UNIT-VI
Synchronization and frequency division:
Pulse synchronization of relaxation devices, frequency division of the sweep
circuit-synchronization of Astable multi, Monostable multivibrator,
synchronization of sweep circuit with symmetrical signals-sine wave
frequency division with a sweep circuit.
Sampling Gates: Basic operating principle, Unidirectional diode gate
circuits, bi-directional gates using transistors. A bidirectional diode gate,
Four- diode gate.
Text books:
1. "Pulse, Digital and switching wave forms" by Milliman and Taub Mc
Graw Hill
2. Micro electronics by MilliMan ?McGrawHill
References:
1. MS PrakashRao "Pulse and Digital Circuits" Tata McGraw Hill
2. David J.Comer, "Digital Logical State Machine Design", Oxford
university press, 2008, third edition
3. Venkatrao, K.Ramasudha, K.Manmadharao. G, "Pulse and Digital
Circuits", pearson education, 2010.
4. Pulse and digital circuitsby Anandkumar, PHI
Electrical and Electronics Engineering
90
T P C
II Year ? II SEMESTER
3+1 0 3
POWER SYSTEMS-I
Preamble :
Electrical Power plays significant role in day to day life of entire mankind.
The aim of this course is to allow the students to understand the concepts of
the generation and distribution of power along with economic aspects.
Learning objectives :
i.
To study the principle of operation and function of different
components of a thermal power station.
ii.
To study the principle of operation and function of different
components of a Nuclear power station.
iii.
To study the concepts of DC and AC distribution systems along
with voltage drop calculations.
iv.
To study the constructional details, principle of operation and
function of different components of an Air and Gas Insulated
substations.
v.
To study the constructional details and classification of cables with
necessary numerical calculations.
vi.
To study the concepts of different types of load curves and types of
tariffs applicable to consumers.
UNIT-I Thermal Power Stations
Selection of site, general layout of a thermal power plant showing paths of
coal, steam, water, air, ash and flue gasses, ash handling system, Brief
description of components: Boilers, Super heaters, Economizers, electrostatic
precipitators steam Turbines : Impulse and reaction turbines, Condensers,
feed water circuit, Cooling towers and Chimney.
UNIT-II Nuclear Power Stations
Location of nuclear power plant, Working principle, Nuclear fission, Nuclear
fuels, Nuclear chain reaction, nuclear reactor Components : Moderators,
Control rods, Reflectors and Coolants.Types of Nuclear reactors and brief
description of PWR, BWR and FBR. Radiation: Radiation hazards and
Shielding, nuclear waste disposal.
Electrical and Electronics Engineering
91
UNIT-III Distribution Systems
Classification of distribution systems, design features of distribution systems,
radial distribution, ring main distribution, voltage drop calculations: DC
distributors for following cases - radial DC distributor fed at one end and at
both ends (equal / unequal voltages), ring main distributor, stepped
distributor and AC distribution, comparison of DC and AC distribution.
UNIT-IV Substations
Classification of substations: Air Insulated Substations - Indoor & Outdoor
substations, Substations layouts of 33/11 kV showing the location of all the
substation equipment.
Bus bar arrangements in the Sub-Stations: Simple arrangements like single
bus bar, sectionalized single bus bar, double bus bar with one and two circuit
breakers, main and transfer bus bar system with relevant diagrams.
Gas Insulated Substations (GIS) ? Advantages of Gas insulated substations,
different types of gas insulated substations, single line diagram of gas
insulated substations, constructional aspects of GIS, Installation and
maintenance of GIS, Comparison of Air insulated substations and Gas
insulated substations.
UNIT-V Underground Cables
Types of Cables, Construction, Types of insulating materials, Calculation of
insulation resistance, stress in insulation and power factor of cable, Numerical
Problems.
Capacitance of single and 3-Core belted Cables, Numerical Problems. Grading
of Cables-Capacitance grading and Intersheath grading, Numerical Problems.
UNIT-VI Economic Aspects of Power Generation & Tariff
Economic Aspects - Load curve, load duration and integrated load duration
curves, discussion on economic aspects: connected load, maximum demand,
demand factor, load factor, diversity factor, power capacity factor and plant
use factor, Base and peak load plants, Numerical problems.
Tariff Methods - Costs of Generation and their division into Fixed, Semi-
fixed and Running Costs, Desirable Characteristics of a Tariff Method, Tariff
Methods: Simple rate, Flat Rate, Block-Rate, two-part, three?part, and power
factor tariff methods, Numerical problems.
Learning Outcomes:
i.
Students are able to identify the different components of thermal
power plants.
Electrical and Electronics Engineering
92
ii.
Students are able to identify the different components of nuclear
Power plants.
iii.
Students are able to distinguish between AC & DC distribution
systems and also estimate voltage drops in both types of distribution
systems.
iv.
Students are able to locate the different components of an air and
gas insulated substations.
v.
Students are able to identify single core and multi core cables with
different insulating materials.
vi.
Students are able to analyse the effect of load factor, demand factor
and diversity factor on the cost of generation of electrical power and
also able to identify the types of tariff applicable to consumers based
on their load demand.
TEXT BOOKS:
1. A Text Book on Power System Engineering by M.L.Soni, P.V.Gupta,
U.S.Bhatnagar and A. Chakrabarti, Dhanpat Rai & Co. Pvt. Ltd.
2. Generation, Distribution and Utilization of Electric Energy by
C.L.Wadhawa New age International (P) Limited, Publishers.
REFERENCE BOOKS:
1. Electrical Power Distribution Systems by - V. Kamaraju, Tata Mc
Graw Hill, New Delhi.
2. Elements of Electrical Power Station Design by ? M V Deshpande,
PHI, New Delhi.
Electrical and Electronics Engineering
93
T P C
II Year ? II SEMESTER
3+1 0 3
ELECTRICAL MACHINES ? II
Preamble:
This course covers the topics on single-phase transformers, three-phase
transformers and 3-phase induction motor which have wide application in
power systems. The main aim of the course is to provide detail concepts,
operation and performance of transformers and 3-phase induction motors. A
complete design procedure for the design of transformers and 3-phase
induction motors can be developed based on basic concepts discussed in unit-
VI.
Learning objectives:
i.
Appreciate the concept of operation and performance of single-
phase transformers.
ii.
Understand the methods of testing of single-phase transformer.
iii.
Distinguish between single-phase and three-phase transformers.
iv.
Understand the concept of operation and performance of 3-phase
induction motor.
v.
Appreciate the relation between torque and slip, performance of
induction motor and induction generator.
vi.
Understand the basic concepts of design of transformers and 3-phase
induction motors.
UNIT-I
Single-phase Transformers
Types and constructional details - principle of operation - emf equation -
operation on no load and on load ? lagging, leading and unity power factors
loads - phasor diagrams of transformers ? equivalent circuit ? regulation ?
losses and efficiency ? effect of variation of frequency and supply voltage on
losses ? All day efficiency.
UNIT-II
Single-phase Transformers Testing
Tests on single phase transformers ? open circuit and short circuit tests ?
Sumpner's test ? separation of losses ? parallel operation with equal voltage
Electrical and Electronics Engineering
94
ratios ? auto transformer - equivalent circuit ? comparison with two winding
transformers.
UNIT-III
3-Phase Transformers
Polyphase connections - Y/Y, Y/, /Y, / and open -- Third harmonics
in phase voltages - three winding transformers: determination of Zp, Zs and
Zt -- transients in switching - off load and on load tap changers -- Scott
connection.
UNIT-IV
3-phase Induction Motors
construction details of cage and wound rotor machines - production of
a rotating magnetic field - principle of operation - rotor emf and rotor
frequency - rotor current and pf at standstill and during running conditions -
rotor power input, rotor copper loss and mechanical power developed
and their inter relationship ? equivalent circuit ? phasor diagram
UNIT-V
Characteristics, starting and testing methods of Induction Motors
Torque equation - expressions for maximum torque and starting torque -
torque slip characteristic - double cage and deep bar rotors - crawling and
cogging - no load and blocked rotor tests - circle diagram for
predetermination of performance - methods of starting ? starting current and
torque calculations ? induction generator operation.
UNIT-VI
Design of transformer and 3-phase induction motor
Transformer: Design concept ? output equation ? choice of windings ?
calculation of number of turns ? length of mean turn of winding - calculation
of resistance and leakage reactance.
Three phase induction motor: Design concept ? choice of specific electric
and magnetic loadings ? output equation ? stator design ? number of slots ?
conductor dimensions ? type of winding ? number of rotor slots ? conductor
dimensions.
Learning outcomes:
i.
Able to explain the operation and performance of single phase
transformer.
ii.
Able to explain the regulation losses and efficiency of single phase
transformer.
Electrical and Electronics Engineering
95
iii.
Able to explain types of three phase transformer connection, tap
changing methods and 3-phase to 2-phase transformation.
iv.
Able to explain the operation and performance of three phase
induction motor.
v.
Able to analyze the torque-speed relation, performance of induction
motor and induction generator.
vi.
Able to explain design procedure for transformers and three phase
induction motors.
TEXT BOOKS:
1. The performance and design of alternating current machines ? M.G.
Say, CBS publishers & distributors, New Delhi.
2. Electrical Machines ? P.S. Bimbra, Khanna Publishers.
REFERENCE BOOKS:
1. Electrical Machines by J.B.Guptha, S.K.Kataria & Sons.
2. Electrical Machines by D. P.Kothari, I .J .Nagarth,Mc GrawHill
Publications, 4th edition.
3. Electrical Machines by R.K.Rajput, Lakshmi publications,Fifth
edition.
4. Electrical Machine Design by Sawhney, Dhanpath Rai Publications.
5. Electrical Machines by Smarajit Ghosh, Pearson Publications.
Electrical and Electronics Engineering
96
T P C
II Year ? II SEMESTER
3+1 0 3
CONTROL SYSTEMS
Preamble :
This course introduces the elements of linear control systems and their
analysis. Classical methods of design using frequency response are included.
The state space approach for modeling and analysis is the added feature of
this course.
UNIT ? I:
Learning Objective:
To learn the mathematical modeling of physical systems and to use block
diagram algebra and signal flow graph to determine overall transfer function.
MATHEMATICAL MODELING OF CONTROL SYSTEMS
Open Loop and closed loop control systems and their differences,
Classification of control systems, Feed-Back Characteristics, transfer
function of linear system, Differential equations of electrical networks,
Translational and Rotational mechanical systems, Transfer Function of DC
Servo motor - AC Servo motor- Synchro-transmitter and Receiver, Block
diagram algebra ? Representation by Signal flow graph - Reduction using
Mason's gain formula.
Outcome:
Ability to derive the transfer function of physical systems and determination
of overall transfer function using block diagram algebra and signal flow
graphs.
UNIT-II:
Learning Objective:
To analyze the time response of first and second order systems and
improvement of performance by proportional plus derivative and
proportional plus integral controllers.
TIME RESPONSE ANALYSIS
Standard test signals - Time response of first order systems ?Time response
of second order systems - Time domain specifications - Steady state errors
and error constants ? Effects of proportional derivative, proportional integral
systems.
Electrical and Electronics Engineering
97
Outcome:
Capability to determine time response specifications of second order systems
and to determine error constants.
UNIT ? III:
Learning Objective :
To investigate the stability of closed loop systems using Routh's stability
criterion and the analysis by root locus method.
STABILITY AND ROOTLOCUS TECHNIQUE
The concept of stability ? Routh's stability criterion ?limitations of Routh's
stability ? The root locus concept - construction of root loci (Simple
problems)
Outcome:
Acquires the skill to analyze absolute and relative stability of LTI systems
using Routh's stability criterion and the root locus method.
UNIT?IV:
Learning Objective :
To present the Frequency Response approaches for the analysis of linear time
invariant (LTI) systems using Bode plots, polar plots and Nyquist stability
criterion.
FREQUENCY RESPONSE ANALYSIS
Introduction, Frequency domain specifications-Bode diagrams- transfer
function from the Bode Diagram-Phase margin and Gain margin-Stability
Analysis from Bode Plots, Polar Plots, Nyquist Stability criterion.
Outcome:
Capable to analyze the stability of LTI systems using frequency response
methods.
UNIT?V:
Learning Objective :
To discuss basic aspects of design and compensation of linear control
systems using Bode plots.
CLASSICAL CONTROL DESIGN TECHNIQUES
Lag, Lead, Lag-Lead compensators, design of compensators ? using Bode
plots.
Outcome:
Able to design Lag, Lead, Lag-Lead compensators to improve system
performance from Bode diagrams.
Electrical and Electronics Engineering
98
UNIT?VI:
Learning Objective:
Ability to formulate state models and analyze the systems. To present the
concepts of Controllability and Observability.
STATE SPACE ANALYSIS OF CONTINUOUS SYSTEMS
Concepts of state, state variables and state model, state space representation
of transfer function, Diagonalization- Solving the Time invariant state
Equations- State Transition Matrix and it's Properties ? Concepts of
Controllability and Observability.
Outcome:
Ability to represent physical systems as state models and determine the
response. Understanding the concepts of controllability and observability.
TEXT BOOKS:
1. Modern Control Engineering, Kotsuhiko Ogata, Prentice Hall of
India.
2.
Automatic control systems, Benjamin C.Kuo, Prentice Hall of India,
2nd Edition
REFERENCE BOOKS:
1.
Control Systems, Manik Dhanesh N, Cengage publications
2.
Control Systems principles and design, M.Gopal, Tata Mc Graw Hill
education Pvt Ltd., 4th Edition.
3. Control Systems Engineering, S.Palani, Tata Mc Graw Hill
Publications
Electrical and Electronics Engineering
99
T P C
II Year ? II SEMESTER
0 3 2
ELECTRICAL MACHINES ? I LAB
Any 10 of the following experiments are to be conducted:
1. Magnetization characteristics of DC shunt generator. Determination
of critical field resistance and critical speed.
2. Load test on DC shunt generator. Determination of characteristics.
3. Brake test on DC shunt motor. Determination of performance
curves.
4. Load test on DC compound generator. Determination of
characteristics.
5. Hopkinson's test on DC shunt machines. Predetermination of
efficiency.
6. Fields test on DC series machines. Determination of efficiency.
7. Swinburne's test and Predetermination of efficiencies as Generator
and Motor.
8. Speed control of DC shunt motor by Field and armature Control.
9. Brake test on DC compound motor. Determination of performance
curves.
10. Load test on DC series generator. Determination of characteristics.
11. Retardation test on DC shunt motor. Determination of losses at rated
speed.
12. Separation of losses in DC shunt motor.
Electrical and Electronics Engineering
100
T P C
II Year ? II SEMESTER
0 3 2
ELECTRONIC DEVICES & CIRCUITS LAB
PART A: Electronic Workshop Practice
1. Identification, Specifications, Testing of R, L, C Components (Colour
Codes), Potentiometers, Coils, Gang Condensers, Relays, Bread Boards.
2. Identification, Specifications and Testing of active devices, Diodes,
BJTs, JFETs, LEDs, LCDs, SCR, UJT.
3. Soldering Practice- Simple circuits using active and passive components.
4. Study and operation of Ammeters, Voltmeters, Transformers, Analog
and Digital Multimeter, Function Generator, Regulated Power Supply
and CRO.
.
PART B: List of Experiments
(For Laboratory Examination-Minimum of Ten Experiments)
1. P-N Junction Diode Characteristics
Part A: Germanium Diode (Forward bias& Reverse bias)
Part B: Silicon Diode (Forward Bias only)
2. Zener Diode Characteristics
Part A: V-I Characteristics
Part B: Zener Diode as Voltage Regulator
3. Rectifiers (without and with c-filter)
Part A: Half-wave Rectifier
Part B: Full-wave Rectifier
4. BJT Characteristics(CE Configuration)
Part A: Input Characteristics
Part B: Output Characteristics
5. FET Characteristics(CS Configuration)
Part A: Drain Characteristics
Part B: Transfer Characteristics
6. SCR Characteristics
7. UJT Characteristics
8. Transistor Biasing
9. CRO Operation and its Measurements
10. BJT-CE Amplifier
Electrical and Electronics Engineering
101
11. Emitter Follower-CC Amplifier
12. FET-CS Amplifier
PART C: Equipment required for Laboratory
1. Boxes
2. Ammeters (Analog or Digital)
3. Voltmeters (Analog or Digital)
4. Active & Passive Electronic Components
5. Regulated Power supplies
6. Analog/Digital Storage Oscilloscopes
7. Analog/Digital
Function
Generators
8. Digital Multimeters
9. Decade R?sistance Boxes/Rheostats
10. Decade Capacitance
Electrical and Electronics Engineering
102
T P C
III Year ? I SEMESTER
3+1 0 3
MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS
Unit ? I:
(*The Learning objective of this Unit is to understand the concept and
nature of Managerial Economic s and its relationship with other
disciplines, Concept of Demand and Demand forecasting)
Introduction to Managerial Economics and demand Analysis:
Definition of Managerial Economics and Scope-Managerial Economics and
its relation with other subjects-Concepts of Demand-Types-Determents-Law
of Demand its Exception-Elasticity of Demand-Types and Measurement-
Demand forecasting and its Methods.
(**The Learner is equipped with the knowledge of estimating the Demand
for a product and the relationship between Price and Demand)
Unit ? II:
(*The Learning objective of this Unit is to understand the concept of
Production function, Input Output relationship, different Cost Concepts
and Concept of Cost-Volume-Profit Analysis)
Production and Cost Analyses:
Production function-Isoquants and Isocosts-Law of Variable proportions-
Cobb-Douglas Production function-Economics of Sale-Cost Concepts-
Opportunity Cost-Fixed vs Variable Costs-Explicit Costs vs Implicit Costs-
Out of Pocket Costs vs Imputed Costs-Cost Volume Profit analysis-
Determination of Break-Even Point (Simple Problem)
(**One should understand the Cost Concepts for decision making and to
estimate the least cost combination of inputs).
Unit ? III:
(*The Learning Objective of this Unit is t understand the Nature of
Competition, Characteristics of Pricing in the different market structure
and significance of various pricing methods)
Introduction to Markets, Theories of the Firm & Pricing Policies:
Market Structures: Perfect Competition, Monopoly and Monopolistic and
Oligopoly ? Features ? Price, Output Determination ? Managerial Theories
of firm: Maris and Williamson's models ? Methods of Pricing: Limit Pricing,
Market Skimming Pricing, Internet Pricing: Flat Rate Pricing, Usage
sensitive, Transaction based pricing, Priority Pricing.
Electrical and Electronics Engineering
103
(** One has to understand the nature of different markets and Price Output
determination under various market conditions)
Unit ? IV:
(*The Learning objective of this Unit is to know the different forms of
Business organization and their Merits and Demerits both public &
private Enterprises and the concepts of Business Cycles)
Types of Business Organization and Business Cycles:
Features and Evaluation of Sole Trader ? Partnership ? Joint Stock Company
? State/Public Enterprises and their forms ? Business Cycles ? Meaning and
Features ? Phases of Business Cycle.
(**One should equipped with the knowledge of different Business Units)
Unit ? V:
(*The Learning objective of this Unit is to understand the different
Accounting Systems preparation of Financial Statements and uses of
different tools for performance evaluation)
Introduction to Accounting & Financing Analysis:
Introduction to Double Entry Systems ? Preparation of Financial Statements-
Analysis and Interpretation of Financial Statements-Ratio Analysis ?
Preparation of Funds flow cash flow statements (Simple Problems)
(**The Learner is able to prepare Financial Statements and the usage of
various Accounting tools for Analysis)
Unit ? VI:
(*The Learning objective of this Unit is to understand the concept of Capital,
Capitalization, Capital Budgeting and to know the techniques used to
evaluate Capital Budgeting proposals by using different methods)
Capital and Capital Budgeting: Capital Budgeting: Meaning of Capital-
Capitalization-Meaning of Capital Budgeting-Need for Capital Budgeting-
Techniques of Capital Budgeting-Traditional and Modern Methods.
(**The Learner is able to evaluate various investment project proposals with
the help of capital budgeting techniques for decision making)
Note: *Learning Objective
** Learning Assessment
TEXT BOOKS
1.
Dr. N. Appa Rao, Dr. P. Vijay Kumar: `Managerial Economics and
Financial Analysis', Cengage Publications, New Delhi ? 2011
Electrical and Electronics Engineering
104
2.
Dr. A. R. Aryasri ? Managerial Economics and Financial Analysis,
TMH 2011
3. Prof. J.V.Prabhakara Rao, Prof. P. Venkatarao. `Managerial
Economics and Financial Analysis', Ravindra Publication.
REFERENCES:
1.
V. Maheswari : Managerial Economics, Sultan Chand.
2.
Suma Damodaran : Managerial Economics, Oxford 2011.
3.
Dr. B. Kuberudu and Dr. T. V. Ramana : Managerial Economics &
Financial Analysis, Himalaya Publishing House 2011.
4.
Vanitha Agarwal : Managerial Economics, Pearson Publications
2011.
5.
Sanjay Dhameja : Financial Accounting for Managers, Pearson.
6.
Maheswari : Financial Accounting, Vikas Publications.
7.
S. A. Siddiqui & A. S. Siddiqui : Managerial Economics and
Financial Analysis, New Age International Publishers, 2012.
Electrical and Electronics Engineering
105
T P C
III Year ? I SEMESTER
3+1 0 3
ELECTRICAL MEASUREMENTS
Preamble:
This course introduces principle of operation of basic analog and digital
measuring instruments for measurement of current, voltage, power, energy
etc. Measurement of resistance, inductance and capacitance by using bridge
circuits will be discussed in detail. It is expected that student will be thorough
with various measuring techniques that are required for an electrical
engineer.
Learning Objectives:
? To study the principle of operation and working of different types of
instruments. Measurement of voltage and current.
? To study the working principle of operation of different types of
instruments for measurement of power and energy
? To understand the principle of operation and working of dc and ac
potentiometers.
? To understand the principle of operation and working of various
types of bridges for measurement of parameters ?resistance,
inductance, capacitance and frequency.
? To study the principle of operation and working of various types of
magnetic measuring instruments.
? To study the applications of CRO for measurement of frequency,
phase difference and hysteresis loop using Lissajous patterns
UNIT?I:
Measuring Instruments
Classification ? Deflecting, control and damping torques ? Ammeters and
Voltmeters ? PMMC, moving iron type, dynamometer and electrostatic
instruments ? Expression for the deflecting torque and control torque ? Errors
and compensations? Extension of range using shunts and series resistance ?
CT and PT: Ratio and phase angle errors ? Design considerations.
UNIT ?II:
Measurement of Power and Energy
Electrical and Electronics Engineering
106
Single phase and three phase dynamometer wattmeter ? LPF and UPF ?
Expression for deflecting and control torques ? Extension of range of
wattmeter using instrument transformers ? Measurement of active and
reactive powers in balanced and unbalanced systems ? Type of P.F. Meters ?
Single phase and three phase dynamometer and moving iron type Single
phase induction type energy meter ? Driving and braking
torques ? errors and compensations ?Testing by phantom loading using
R.S.S. meter? Three phase energy meter ? Tri vector meter ? Maximum
demand meters? Electrical resonance type frequency meter and Weston type
synchroscope.
UNIT ? III:
Potentiometers
Principle and operation of D.C. Crompton's potentiometer ? Standardization
? Measurement of unknown resistance ? Current ? Voltage ? AC
Potentiometers: polar and coordinate types ?Standardization ? Applications.
UNIT ? IV:
Measurements of Parameters
Method of measuring low, medium and high resistance ? Sensitivity of
Wheat stone's bridge ? Carey Foster's bridge? Kelvin's double bridge for
measuring low resistance? Loss of charge method for measurement of high
resistance ? Megger? Measurement of earth resistance ? Measurement of
inductance ? Quality Factor ? Maxwell's bridge?Hay's bridge ? Anderson's
bridge?Measurement of capacitance and loss angle ? Desautybridge ?
Schering Bridge?Wagner's earthing device?Wien's bridge.
UNIT ? V:
Magnetic Measurements
Ballistic galvanometer ? Equation of motion ? Flux meter ? Constructional
details?Determination of B?H Loop methods of reversals six point method ?
AC testing ? Iron loss of bar samples? Core loss measurements by bridges
and potentiometers.
UNIT ? VI:
Digital Meters
Digital Voltmeter?Successive approximation ? Measurement of phase
difference ? Frequency ? Hysteresis loop using lissajious patterns in CRO ?
Ramp and integrating type?Digital frequency meter?Digital multimeter?
Digital Tachometer.
Electrical and Electronics Engineering
107
Learning Outcomes:
? Able to choose right type of instrument for measurement of voltage
and current for ac and dc.
? Able to choose right type of instrument for measurement of power
and energy ? able to calibrate energy meter by suitable method
? Able to calibrate ammeter and potentiometer.
? Able to select suitable bridge for measurement of electrical
parameters
? Able to use the ballistic galvanometer and flux meter for magnetic
measuring instruments
? Able to measure frequency and phase difference between signals
using CRO. Able to use digital instruments in electrical
measurements.
Text Books:
1. Electrical Measurements and measuring Instruments ? by E.W.
Golding and F.C.Widdis, fifth Edition, Wheeler Publishing.
2. Modern Electronic Instrumentation and Measurement Techniques ?
A.D. Helfrick and W.D. Cooper, PHI, 5th Edition, 2002.
3. Electrical and Electronic Measurements and instrumentation by
R.K.Rajput, S.Chand
Reference Books:
1. Electrical & Electronic Measurement & Instruments by A.K.Sawhney
Dhanpat Rai &Co.Publications.
2. Electrical Measurements ? by Buckingham and Price, Prentice ? Hall
3. Electrical Measurements by Forest K. Harris. John Wiley and Sons
4. Electrical Measurements: Fundamentals, Concepts, Applications ? by
Reissland, M.U, New Age International (P) Limited, Publishers.
5. Electrical and Electronic Measurements ?by G.K.Banerjee, PHI
Learning Private Ltd, New Delhi?2012
.
Electrical and Electronics Engineering
108
T P C
III Year ? I SEMESTER
3+1 0 3
POWER SYSTEMS?II
Preamble:
This course is an extension of power systems?I course. It deals with basic
theory of transmission lines modeling and their performance analysis.
Transient in power system, improvement of power factor and voltage control
are discussed in detail. It is important for the student to understand the
mechanical design aspects of transmission lines, cables, insulators. These
aspects are also covered in detail in this course.
Learning Objectives:
? To compute inductance and capacitance of transmission lines and to
understand the concepts of GMD, GMR.
? To study short and medium length transmission lines, their models
and performance computation.
? To study the performance and modeling of long transmission lines.
? To study the transient on transmission lines.
? To study the factors affecting the performance of transmission lines
and power factor improvement methods.
? To discuss sag and tension computation of transmission lines as well
as to study the over head insulators.
UNIT?I:
Transmission Line Parameters
Types of conductors ? Calculation of resistance for solid conductors ?
Calculation of inductance for single phase and three phase? Single and
double circuit lines? Concept of GMR and GMD?Symmetrical and
asymmetrical conductor configuration with and without transposition?
Numerical Problems?Calculation of capacitance for 2 wire and 3 wire
systems ? Effect of ground on capacitance ? Capacitance calculations for
symmetrical and asymmetrical single and three phase?Single and double
circuit lines?Numerical Problems.
UNIT?II:
Performance of Short and Medium Length Transmission Lines
Classification of Transmission Lines ? Short, medium, long line and their
model representations ?Nominal-T?Nominal-Pie and A, B, C, D Constants
Electrical and Electronics Engineering
109
for symmetrical and Asymmetrical Networks? Numerical Problems?
Mathematical Solutions to estimate regulation and efficiency of all types of
lines ? Numerical Problems.
UNIT?III:
Performance of Long Transmission Lines
Long Transmission Line?Rigorous Solution ? Evaluation of A,B,C,D
Constants?Interpretation of the Long Line Equations ? Incident, Reflected
and Refracted Waves ?Surge Impedance and SIL of Long Lines?Wave
Length and Velocity of Propagation of Waves ? Representation of Long
Lines ? Equivalent-T and Equivalent Pie network models (Numerical
Problems).
UNIT ? IV:
Power System Transients
Types of System Transients ? Travelling or Propagation of Surges ?
Attenuation?Distortion ? Reflection and Refraction Coefficients ?
Termination of lines with different types of conditions ? Open Circuited
Line?Short Circuited Line ? T-Junction? Lumped Reactive Junctions
(Numerical Problems).
UNIT?V:
Various Factors Governing the Performance of Transmission line
Skin and Proximity effects ? Description and effect on Resistance of Solid
Conductors ?Ferranti effect ? Charging Current ? Effect on Regulation of the
Transmission Line?Shunt Compensation ?Corona ? Description of the
phenomenon?Factors affecting corona?Critical voltages and power loss ?
Radio Interference ?Power factor improvement methods.
UNIT?VI:
Sag and Tension Calculations and Overhead Line Insulators
Sag and Tension calculations with equal and unequal heights of towers?
Effect of Wind and Ice on weight of Conductor?Numerical Problems ?
Stringing chart and sag template and its applications?Types of Insulators ?
String efficiency and Methods for improvement?Numerical Problems ?
Voltage distribution?Calculation of string efficiency?Capacitance grading
and Static Shielding.
Learning Outcomes:
? Able to understand parameters of various types of transmission lines
for using calculation and behavior during different operating
conditions.
Electrical and Electronics Engineering
110
? Able to understand the insight into specific transmission lines short
and medium type which would have application in medium and high
voltage power transmission systems.
? Student will be able to understand the surge propagation, reflection
and refraction in transmission lines. such output will be useful in
protecting transmission line insulators and designing level of
insulation coordination at various high voltages.
? Will be able to utilize it for understanding the surge behaivour of
transmission line for protection of connects equipments,viz.power
transformer and system connected shunt reactors.
? Will be able to understand various phenomenon related to charged line
transmitting different level of power.
? Will be able to understand physical and geometrical parameters of
transmission line for safe and efficient performance during operating
condition of voltage and power.
Text Books:
1. Electrical power systems ? by C.L. Wadhwa, New Age International
(P) Limited, Publishers, 1998.
2. Modern Power System Analysis by I.J. Nagarath and D.P.Kothari,
Tata Mc Graw Hill, 2nd Edition.
3. Electrical Power Systems by P.S.R. Murthy, B.S. Publications.
Reference Books:
1. Power system Analysis?by John J Grainger William D Stevenson,
TMC Companies, 4th edition
2. Power System Analysis and Design by B.R. Gupta, Wheeler
Publishing.
3. A Text Book on Power System Engineering by M.L.Soni, P.V.Gupta,
U.S. Bhatnagar A .Chakrabarthy, DhanpatRai& Co Pvt. Ltd.
Electrical and Electronics Engineering
111
T P C
III Year ? I SEMESTER
3+1 0 3
ELECTRICAL MACHINES ? III
Preamble:
This course essentially covers ac machines. It covers topics related to
principle of operation, constructional features and starting of single phase
induction motors and three phase synchronous motors. In addition, it also
covers voltage regulation and parallel operation of synchronous generators.
Learning Objectives:
? To study the application of "Double revolving field" theory for single
? phase induction motor and appreciate the function and application of
a.c series motor.
? To discuss e.m.f generation principle of synchronous generator and
armature reaction effect.
? To study the effect of load at different power factors, methods of
predetermination of regulation for non? salient and salient pole
generators.
? To study the parallel operation and the concepts of transfer of real and
reactive powers.
? To understand the operation and performance of synchronous motor.
? To study the power circle diagrams and methods of starting of
synchronous motor.
UNIT ? I:
Single Phase Motors
Single phase induction motors ? Constructional features and the problem of
starting?Double revolving field theory?AC Series motor?Compensation.
UNIT?II:
Synchronous generator construction and operation
Constructional features of non?salient and salient pole type ? Armature
windings ?Distributed and concentrated windings ? Distribution? Pitch and
winding factors ?E.M.F equation?Improvements of waveform and armature
reaction? Numerical problems.
Electrical and Electronics Engineering
112
UNIT ? III:
Voltage regulation of synchronous generator
Voltage regulation by synchronous impedance method? MMFmethod and
Potier triangle method?Phasor diagrams? Two reaction analysis of salient
pole machines and phasor diagram? Numerical problems.
UNIT ?IV:
Parallel operation of synchronous generators
Parallel operation with infinite bus and other alternators ? Synchronizing
power ? Load sharing ?Transfer of real and reactive power? Numerical
problems.
UNIT?V:
Synchronous motor ? operation
Synchronous Motor principle and theory of operation? Phasor diagram ?
Starting torque?Variation of current and power factor with excitation ?
Synchronous condenser ? Mathematical analysis for power developed?
Numerical problems.
UNIT ? VI:
Synchronous motor performance and starting
Excitation and power circles ? Hunting and its suppression ? Methods of
starting ? Synchronous induction motor.
Learning outcomes:
At the end of the course the student should be able to
? Analyze the performance of single phase induction and ac series
motors.
? Explain the structure of synchronous machines and design the
windings.
? Develop solutions for regulation of both non salient pole and salient
pole synchronous generators.
? Explain the role of synchronous generators operation when
connected to an infinite bus or when operating in parallel.
? Analyze the performance of synchronous motor for development of
torque and power factor correction.
? Explain hunting phenomenon and methods of starting of
synchronous motor.
Electrical and Electronics Engineering
113
Text Books:
1. Electrical Machines ? by P.S. Bhimbra, Khanna Publishers.
2. The Performance and Design of AC Machines ? by M.G.Say, ELBS
and Ptiman& Sons.
Reference Books:
1. Electric Machinery ? by A.E. Fitzgerald, C. Kingsley and S.Umans-
by Mc Graw?Hill Companies, 5th edition, 1990.
2. Theory of Alternating Current Machinery by Langsdorf, Tata Mc
Graw?Hill, 2nd edition.
3. Analysis of Electric Machinery and Drive systems ? by Paul C.
Krause, Oleg Wasynczuk and Scott D.Sudhoff, wiley publications, 2nd
edition Publishers.
Electrical and Electronics Engineering
114
T P C
III Year ? I SEMESTER
3+1 0 3
POWER ELECTRONICS
Preamble:
The usage of power electronics in day to day life has increased in recent
years. It is important for student to understand the fundamental principles
behind all these converters. This course covers characteristics of semi
conductor devices, ac/dc, dc/dc, ac/ac and dc/ac converters. The importance
of using pulse width modulated techniques to obtain high quality power
supply (dc/ac converter) is also discussed in detail in this course.
Learning Objectives:
? To study the characteristics of various power semiconductor derive
and analyze the operation of diode bridge rectifier.
? To design firing circuits for SCR. Analyze the operation of AC
voltage controller and half?wave phase controlled rectifiers.
? To understand the operation of single phase full?wave converters
and analyze harmonics in the input current.
? To study the operation of three phase full?wave converters and dual
converter.
? To analyze the operation of single phase cyclo converters and high
frequency dc?dc converters.
? To understand the working of inverters and application of PWM
techniques for voltage control and harmonic mitigation.
UNIT?I:
Power Semi Conductor Devices
Thyristors?Silicon controlled rectifiers (SCR's) ?Characteristics of power
MOSFET and power IGBT? Basic theory of operation of SCR?Static
characteristics? Turn on and turn off methods?Dynamic characteristics of
SCR? Snubber circuit design?Numerical problems?Diode bridge rectifier
with R?load and capacitive filter?Output voltage and input current
waveforms.
UNIT?II:
Phase Controlled Converters ? Single Phase
Electrical and Electronics Engineering
115
Firing circuits for SCR? Line commutation principle? Single phase AC
voltage controller with R and RL load?Half wave converters with R,RL and
RLE loads? Derivation of average load voltage and current?Effect of
freewheeling diode for RL load.
UNIT?III:
Single Phase Bridge Converter and Harmonic Analysis Fully controlled
converters
Operation with R, RL and RLE loads?Derivation of average voltage and
current ? Effect of source Inductance.
Semi Converters (Half Controlled):
Operation with R, RL and RLE loads ? Harmonic analysis for input current
waveform in a system with a large load inductance ?Calculation of input
power factor.
UNIT?IV:
Three Phase AC?DC Bridge Converters
Full converter with R and RL loads?Semi converter (Half Controlled) with R
and RL loads? Derivation of load voltage?Line commutated Inverter
operation?Dual converters with non?circulating and circulating currents.
UNIT ? V:
AC?AC and DC?DC Converters
Single phase Bridge type cyclo converter with R and RL load (Principle of
operation) ?High frequency DC?DC converters: Buck Converter operation?
Time ratio control and current limit control strategies?Voltage and current
waveforms?Derivation of output voltage?Boost converter operation?Voltage
and current waveforms?Derivation of output voltage ? Buck-Boost converter
operation ?Voltage and current waveforms.
UNIT ? VI:
DC?AC Inverters
Inverters
Single phase inverters?Unipolar and bipolar switching?Three phase Inverters
(1200 and 1800 modes of operation) ?PWM techniques? Sine triangular
PWM technique? amplitude and frequency modulation Indices ?Harmonic
analysis.
Learning Outcomes:
Student should be able to
Electrical and Electronics Engineering
116
? Explain the characteristics of various power semiconductor derive
and analyze the operation of diode bridge rectifier.
? Design firing circuits for SCR. Analyze the operation of AC voltage
controller and half?wave phase controlled rectifiers.
? Explain the operation of single phase full?wave converters and
analyze harmonics in the input current.
? Explain the operation of three phase full?wave converters and dual
converter.
? Analyze the operation of single phase cyclo converters and high
frequency dc?dc converters.
? Explain the working of inverters and application of PWM
techniques for voltage control and harmonic mitigation.
Text Books:
1. Power Electronics: Circuits, Devices and Applications ? by M. H.
Rashid, Prentice Hall of India, 2nd edition, 1998
2. Power Electronics: converters, applications & design -by
Nedmohan, Tore M. Undeland, Robbins by Wiley India Pvt. Ltd.
3. Power Converter Circuits -by William Shepherd, Li zhang, CRC
Taylor & Francis Group.
Reference Books:
1. Elements of Power Electronics?Philip T.Krein.oxford.
2. Power Electronics ? by P.S.Bhimbra, Khanna Publishers.
3. Thyristorised Power Controllers ? by G. K. Dubey, S. R. Doradla,
A. Joshi and R. M. K.Sinha, New Age International (P) Limited
Publishers, 1996.
4. Power Electronics handbook by Muhammad H. Rashid, Elsevier.
Electrical and Electronics Engineering
117
T P C
III Year ? I SEMESTER
3+1 0 3
LINEAR & Digital IC APPLICATIONS
Preamble:
All Electronic devices developed in circuit Concepts. Thus all analog circuits
developed on circuit Concept basis. But the advancement of Technology in
Fabrication Field gain prominence and all discrete components are fabricated
using I.C Technology. On a Single chip millions of transistors are fabricated
using Very Large Scale IC. In This context Operational Amplifies which is
an analog device plays an important role for Analog IC Design.
Operational Amplifies performs Algebraic operations, Logarithmic
Operations, Trigonometric Operations etc. Therefore these Operational
Amplifiers design goes into System design instead of circuit design. So
Linear IC applications plays vital role in the electronic field Starting from
home appliances to Super computers.
Learning Objectives:
After completion of this course, the reader should be able to
? Draw a block diagram representing a typical op-amp with various
definitions.
? Draw and explain the open-loop configuration and feedback
configuration and can determine Voltage gain, the input resistance,
the output resistance.
? Differentiate between Ideal and Non-Ideal Op-Amp, Determination
of closed loop voltage gain, the input resistance, the output
resistance for Non-Ideal Op-Amp Circuits.
? Perform various mathematical Operations, Trigonometric &
Logarithmic Operations, and Instrumentation Amplifier with
relevant Circuits.
? Design waveform generators (Astable, Monostable, Schmitt
Trigger) using Single Op-Amp.
? Study of 555 timer & its applications using Astable and Monostable
Operations
? Can design various types of Active Filters such as LPF, HPF, BPF,
BRF, NBPF, Notch Filter, ALL pass filters.
? Study the operation & applications of PLA.
? Explain the operation of A/D and D/A Converters.
Electrical and Electronics Engineering
118
UNIT?I:
Introduction To Operational Amplifier
Block diagram of Typical Op?Amp With Various Stages? BJT Differential
Amplifier With RE DC Analysis? AC Analysis ?BJT differential amplifier
with constant current source ? Analysis Different input/output configurations
dual input balanced output?Dual input unbalanced output?Signal input
balanced output?Signal input unbalanced output?AC analysis with r?
parameters ?Current repeater circuits?Current mirror circuits?Analysis?
Level translator ? Cascade differential amplifier? FET differential amplifier.
UNIT?II:
OP?AMP Parameter
Input offset voltage ? Input off?set current?Input bias current?Differential
input resistance?Common mode rejection ratio?Slew ratio?PSRR?Large
signal voltage gain?Output voltage swing transients response?definitions and
explanations. Measurement of bias current?Measurement of offset currents?
Measurement of offset voltage ?Measurement of slew rate ? Output offset
voltage balancing circuits?Bias current compensations circuit?Dual power
suppliers with shunt capacitance filter?Fix voltages Regulators 78XX?79XX
sering and as currents sources? Dual power supply using 78XX and 79XX
sering.
UNIT?III
Ideal Operational Amplifier Theory and Basic Circuits
Ideal operational amplifier properties?Ideal assumptions?Basic circuits such
as non inverting type comparator?Inverting type comparator?Voltage
follower? Inverting amplifier?Non?inverting amplifier?Summing amplifier?
Non?inverting summing amplifier?sub-tractor? Differentiator?Integrator?
Scale changer?Instrumentation amplifier? V to I and I to V convertors?Log
and Anti?log amplifiers?Zero crossing detector?Schmitt-trigger peak
detector? Half-wave and full-wave rectifiers? Precision diode? Non-ideal
operational amplifier non?inverting amplifier? inverting amplifier? closed-
loop gain?Input and output resistance equivalent circuits.
UNIT?IV:
Wave form generator in angular waveform generator using op?amps
and PLL Design of Astable multivibrator ?Monostable multivibrator using
signal op-amp?Trigring waveform generator 555 timer:Introduction?
Pindiagram?Functional diagram for 8pin DIP?Design of Astable and
monostable multi? Astable applicatio?Monostable applications? PLL:
Introduction,basic blockdiagram? Furctions of each block?566 VC0? 565
PLL block diagram ?Function of each block?Applications of PLL?Frequency
Electrical and Electronics Engineering
119
multiplier role of each pin frequency transalation? AM?FM and FSK
demodulators.
UNIT?V:
Active filters
Introduction? Merits and demerits of active filters?Over passive filters? First
order low pass Butter?Worth filter ?Design and frequency response?Second
order LPF design and frequency response ? First order HPF design and
frequency response? Second order HPF design and frequency response?
Higher-order filters? BPF wide band?pass and narrow band?pass filter?Wide
band reject filter?Notch filter?All-pass filter.
UNIT?VI:
D to A and A to D Convertors
Digital to Analog Convertors(D to A) ? Introduction?Specifications?Basic
DAC techniques? Weighted resistor DAC? R?2R ladder DAC?Invested R?
2R ?Output expression for each type.
Analog to Digital Convertors
Introduction?Specifications?Parallel comparator type?Counter type?Dual
slope?Successive approximation type ADCs? Merits and demerits of each
type, Comparison of different types.
Learning Outcomes:
? After completion of this course student can able to differentiate
"Analog Circuits & Digital Circuits".
? The course content gives an insight in to the fundamentals so that
one can design the "Linear Circuits" with their own innovative
skills.
? Those who are taken this course can specialize in this subject in
their Post Graduation. It is a challenging task for the individual to
exhibit his logical skills & Analytical ability.
? They can design their own circuits which may be useful for current
industry needs.
Text Books:
1. OP?AMPS and liner integrator circuits by Ramakanth A Gayakwad
(PHI)
2. Linear Integrated Circuits by D.Roy chowdary, New age
international
Electrical and Electronics Engineering
120
3. Op?amp and linear integrated circuits by sanjay sharma, S.K.Kataria
& son's New Delhi.
Reference Books:
1. Micro Electronics? Mclliman Mc Graw Hill
2. Analog Electronics? L.K.Maheswari, PHI
3. Linear Integrated circuits by S.Salivahan, TMH.
Electrical and Electronics Engineering
121
T P C
III Year ? I SEMESTER
0 3 2
ELECTRICAL MACHINES ? II LAB
Learning objectives:
? To predetermine the efficiency and regulation of transformers and asses
their performance.
? To predetermine the regulation of three?phase alternator by various
methods, find Xd / Xq ratio of alternator and asses the performance of
three?phase synchronous motor.
? To perform various tests on Induction motor for assessing its
performance.
The following experiments are required to be conducted as compulsory
experiments:
1. O.C. & S.C. Tests on Single phase Transformer
2. Sumpner's test on single phase transformers
3. Scott connection of transformers
4. No?load & Blocked rotor tests on three phase Induction motor
5. Regulation of a three ?phase alternator by synchronous impedance &
m.m.f. Methods
6. V and Inverted V curves of a three--phase synchronous motor.
7. Equivalent Circuit of a single phase induction motor
8. Determination of Xd and Xq of a salient pole synchronous machine
In addition to the above eight experiments, at least any two of the
following experiments are required to be conducted from the following
list:
1. Parallel operation of Single phase Transformers
2. Separation of core losses of a single phase transformer
3. Brake test on three phase Induction Motor
4. Regulation of three?phase alternator by Potier triangle method.
5. Efficiency of a three?phase alternator
Electrical and Electronics Engineering
122
6. Heat run test on a bank of 3 Nos. of single phase Delta connected
transformers
7. Measurement of sequence impedance of a three?phase alternator.
Learning outcomes:
? Able to predetermine the efficiency and regulation of transformers and
asses their performance.
? Able to predetermine the regulation of three?phase alternator by various
methods, find Xd / Xq ratio of alternator and asses the performance of
three?phase synchronous motor.
? Able to perform various tests on Induction motor for assessing its
performance.
Electrical and Electronics Engineering
123
T P C
III Year ? I SEMESTER
0 3 2
CONTROL SYSTEMS LAB
Learning Objectives:
? To impart hands on experience to understand the performance of
basic control system components such as magnetic amplifiers, D.C.
servo motors, A.C. Servo motors, stepper motor and potentiometer.
? To understand time and frequency responses of control system with
and without controllers and compensators.
Any 10 of the following experiments are to be conducted:
1.
Time response of Second order system
2. Characteristics
of
Synchros
3.
Programmable logic controller ? characteristics of stepper motor
4.
Effect of feedback on DC servo motor
5.
Effect of P, PD, PI, PID Controller on a second order systems
6.
Lag and lead compensation ? Magnitude and phase plot
7.
DC position control system
8.
Transfer function of DC motor
9.
Temperature controller using PID
10.
Characteristics of magnetic amplifiers
11.
Characteristics of AC servo motor
12.
Characteristics of DC servo motor
13.
Potentiometer as an error detector
Learning Outcomes
? Able to analyze the performance and working Magnetic amplifier,
d.c. servo motors, a.c. Servo motors and synchronous motors.
? Able to design P,PI,PD and PID controllers
? Able to design lag, lead and lag?lead compensators
? Able to control the temperature using PID controller
? Able to determine the transfer function of D.C.motor
? Able to control the position of D.C servo motor performance
Electrical and Electronics Engineering
124
T P C
III Year ? I SEMESTER
3+1 0 2
INTELLECTUAL PROPERTY RIGHTS AND PATENTS
Unit I
Introduction to Intellectual Property Law ? Evolutionary past ? Intellectual
Property Law Basics - Types of Intellectual Property - Innovations and
Inventions of Trade related Intellectual Property Rights ? Agencies
Responsible for Intellectual Property Registration ? Infringement -
Regulatory ? Over use or Misuse of Intellectual Property Rights -
Compliance and Liability Issues.
Unit II
Introduction to Copyrights ? Principles of Copyright ? Subject Matters of
Copyright ? Rights Afforded by Copyright Law ?Copyright Ownership ?
Transfer and Duration ? Right to Prepare Derivative Works ?Rights of
Distribution ? Rights of performers ? Copyright Formalities and Registration
? Limitations ? Infringement of Copyright ? International Copyright Law-
Semiconductor Chip Protection Act.
Unit III
Introduction to Patent Law ? Rights and Limitations ? Rights under Patent
Law ? Patent Requirements ? Ownership and Transfer ? Patent Application
Process and Granting of Patent ? Patent Infringement and Litigation ?
International Patent Law ? Double Patenting ? Patent Searching ? Patent
Cooperation Treaty ? New developments in Patent Law- Invention
Developers and Promoters.
Unit IV
Introduction to Trade Mark ? Trade Mark Registration Process ? Post
registration procedures ? Trade Mark maintenance ? Transfer of rights ? Inter
parties Proceedings ? Infringement ? Dilution of Ownership of Trade Mark ?
Likelihood of confusion ? Trade Mark claims ? Trade Marks Litigation ?
International Trade Mark Law
Unit V
Introduction to Trade Secrets ? Maintaining Trade Secret ? Physical Security
? Employee Access Limitation ? Employee Confidentiality Agreement ?
Electrical and Electronics Engineering
125
Trade Secret Law ? Unfair Competition ? Trade Secret Litigation ? Breach of
Contract ? Applying State Law.
Unit VI
Introduction to Cyber Law ? Information Technology Act - Cyber Crime and
E-commerce ? Data Security ? Confidentiality ? Privacy - International
aspects of Computer and Online Crime.
REFERENCE BOOKS:
1. Deborah E.Bouchoux: "Intellectual Property". Cengage learning ,
New Delhi
2. Kompal Bansal & Parishit Bansal "Fundamentals of IPR for
Engineers", BS Publications (Press)
3. Cyber Law. Texts & Cases, South-Western's Special Topics
Collections
4. Prabhuddha Ganguli: ` Intellectual Property Rights" Tata Mc-Graw ?
Hill, New Delhi
5. Richard Stim: "Intellectual Property", Cengage Learning, New Delhi.
6. R. Radha Krishnan, S. Balasubramanian: "Intellectual Property
Rights", Excel Books. New Delhi.
7. M. Ashok Kumar and Mohd. Iqbal Ali: "Intellectual Property Right"
Serials Pub.
Electrical and Electronics Engineering
126
T P C
III Year ? II SEMESTER
3+1 0 3
SWITCHGEAR AND PROTECTION
Preamble:
In order to supply power from generating end to receiving end several
equipments are connected in to the system. In order to protect the equipments
and components against various operating conditions and over voltages
protective devices are required to be installed in the system. Topics specified
in this subject deal with various types of protective equipments and their
working principle including limitations etc.
Learning objectives:
? To provide the basic principles of arc interruption, circuit breaking
principles, operation of various types of circuit breakers.
? To study the classification, operation, construction and application
of different types of electromagnetic protective relays.
? To explain various types of faults in generators and transformers and
different types of protective schemes.
? To impart knowledge of various protective schemes used for feeders
and bus bars.
? To explain the principles and operations of different types of static
relays.
? To study different types of over voltages in a power system and
principles of different protective schemes for insulation co?
ordination.
UNIT?I:
Circuit Breakers
Miniature Circuit Breaker(MCB)? Elementary principles of arc interruption?
Restrike Voltage and Recovery voltages? Restrike phenomenon? Average
and Max. RRRV? Current chopping and Resistance switching? Introduction
to oil circuit breakers? Description and operation of Air Blast? Vacuum and
SF6 circuit breakers? CB ratings and specifications? Auto reclosing.
Electrical and Electronics Engineering
127
UNIT?II:
Electromagnetic Protection
Principle of operation and construction of attracted armature? Balanced
beam? induction disc and induction cup relays? Relays classification?
Instantaneous? DMT and IDMT types? Applications of relays: Over
current/under voltage relays? Directional relays? Differential relays and
percentage differential relays? Universal torque equation? Distance relays:
Impedance? Reactance? Mho and offset mho relays? Characteristics of
distance relays and comparison.
UNIT?III:
Generator Protection
Protection of generators against stator faults? Rotor faults and abnormal
conditions? restricted earth fault and inter turn fault protection? Numerical
examples.
Transformer Protection
Protection of transformers: Percentage differential protection? Design of
CT's ratio? Buchholz relay protection?Numerical examples.
UNIT?IV:
Feeder and Bus bar Protection
Protection of lines: Over current? Carrier current and three zone distance
relay using impedance relays?Translay relay?Protection of bus bars?
Differential protection.
UNIT?V:
Static and Digital Relays
Static relays: Static relay components? Static over current relay? Static
distance relay? Micro processor based digital relays
UNIT?VI:
Protection against over voltage and grounding
Generation of over voltages in power systems? Protection against lightning
over voltages? Valve type and zinc?Oxide lighting arresters? Insulation
coordination? BIL? impulse ratio? Standard impulse test wave? volt~time
characteristics? Grounded and ungrounded neutral systems?Effects of
ungrounded neutral on system performance? Methods of neutral grounding:
Solid?resistance?Reactance?Arcing grounds and grounding Practices.
Electrical and Electronics Engineering
128
Learning Outcomes:
? To be able to understand the principles of arc interruption for
application to high voltage circuit breakers of air, oil, vacuum, SF6
gas type.
? Ability to understand the working principle and constructional
features of different types of electromagnetic protective relays.
? Students acquire in depth knowledge of faults that is observed to
occur in high power generator and transformers and protective
schemes used for all protections.
? Improves the ability to understand various types of protective
schemes used for feeders and bus bar protection.
? Generates understanding of different types of static relays with a
view to application in the system.
? To be able to understand the different types of over voltages
appearing in the system, including existing protective schemes
required for insulation co?ordination.
Text Books:
1. Protection and SwitchGear by BhaveshBhalja, R.P. Maheshwari,
NileshG. Chothani, Oxford University Press, 2013
2. Power system protection- Static Relays with microprocessor
applications. by T.S. Madhava Rao, TMH
3. Electrical Power System Protection by C. CHRISTOPOULOS and A.
Wright, Springer publications
Reference Books:
1. Power System Protection and Switchgear by Badari Ram, D.N
Viswakarma, TMH Publications
2. Fundamentals of Power System Protection by Paithankar and S.R.
Bhide., PHI, 2003.
3. Art & Science of Protective Relaying ? by C R Mason, Wiley Eastern
Ltd.
***
Electrical and Electronics Engineering
129
T P C
III Year ? II SEMESTER
3+1 0 3
MICROPROCESSORS AND MICROCONTROLLERS
Preamble:
Microprocessor and microcontroller have become important building blocks
in digital electronics design. It is important for student to understand the
architecture of a microprocessor and its interfacing with various modules.
8086 microprocessor architecture, programming, and interfacing is dealt in
detail in this course. Interfacing, assembly language programming and
interfacing of 8051 microcontroller and its application in industry are also
covered in this course.
Learning objectives:
? To understand the organization and architecture of Micro Processor
? To understand addressing modes to access memory
? To understand 8051 micro controller architecture
? To understand the programming principles for 8086 and 8051
? To understand the interfacing of MP with IO as well as other
devices
? To understand how to develop cyber physical systems
UNIT?I:
Introduction to Microprocessor Architecture
Introduction and evolution of Microprocessors? Architecture of 8086?
Register Organization of 8086?Memory organization of 8086? General bus
operation of 8086?Introduction to 80286?80386 and 80486 and Pentium.
UNIT?II:
Minimum and Maximum Mode Operations
Instruction set, Addressing modes? Minimum and Maximum mode
operations of 8086?8086 Control signal interfacing?Read and write cycle
timing diagrams.
Electrical and Electronics Engineering
130
UNIT?III:
Assembly Language Programming
Assembly Directives?Macro's? Algorithms for Implementation of FOR
Loop?WHILE?REPEAT and IF-THEN-ELSE Features?Addressing modes
and Instruction set of 8051?Assembly language programming of 8051?
Development systems and tools.
UNIT?IV:
I/O Interface
8255 PPI? Architecture of 8255?Modes of operation? Interfacing I/O devices
to 8086 using 8255?Interfacing A to D converters? Interfacing D to A
converters? Stepper motor interfacing? Static memory interfacing with 8086?
DMA controller (8257)?Architecture?Interfacing 8257 DMA controller?
Programmable Interrupt Controller (8259)?Command words and operating
modes of 8259? Interfacing of 8259?Keyboard/display controller (8279)?
Architecture?Modes of operation?Command words of 8279? Interfacing of
8279.
UNIT?V:
Introduction to 8051 Micro Controller
Overview of 8051 Micro Controller? Architecture? Register set?I/O ports
and Memory Organization? Interrupts?Timers and Counters?Serial
Communication.
UNIT? VI:
Cyber physical systems and industrial applications of 8051
Applications of Micro Controllers? Interfacing 8051 to LED's?Push button?
Relay's and Latch Connections? Keyboard Interfacing? Interfacing Seven
Segment Display?ADC and DAC Interfacing.
Learning Outcomes:
? To be able to understand the microprocessor capability in general
and explore the evalution of microprocessors.
? To be able to understand the addressing modes of microprocessors
? To be able to understand the micro controller capability
Electrical and Electronics Engineering
131
? To be able to program mp and mc
? To be able to interface mp and mc with other electronic devices
? To be able to develop cyber physical systems
Text Books:
1. Microprocessors and Interfacing, Douglas V Hall, Mc?Graw Hill,
2nd Edition.
2. Kenneth J Ayala, "The 8051 Micro Controller Architecture,
Programming and
Applications", Thomson Publishers, 2nd Edition.
3. Ray and Burchandi, "Advanced Micro Processors and Interfacing",
Tata McGraw?Hill.
Reference Books:
1. R.S. Kaler, " A Text book of Microprocessors and Micro
Controllers", I.K. International Publishing House Pvt. Ltd.
2. Ajay V. Deshmukh, "Microcontrollers ? Theory and Applications",
Tata McGraw?Hill Companies ?2005.
3. Ajit Pal, "Microcontrollers ? Principles and Applications", PHI
Learning Pvt Ltd, 2011.
Electrical and Electronics Engineering
132
T P C
III Year ? II SEMESTER
3+1 0 3
UTILIZATION OF ELECTRICAL ENERGY
Preamble:
This course primarily deals with utilization of electrical energy generated
from various sources. It is important to understand the technical reasons
behind selection of motors for electric drives based on the characteristics of
loads. Electric heating, welding and illumination are some important loads in
the industry in addition to motor/drives. Another major share of loads is
taken by Electric Traction. Utilization of electrical energy in all the above
loads is discussed in detail in this course. Demand side management
concepts are also introduced as a part of this course.
Learning objectives:
? To understand the operating principles and characteristics of traction
motors with respect to speed, temperature ,loading conditions.
? To acquaint with the different types of heating and welding
techniques.
? To study the basic principles of illumination and its measurement.
? To understand different types of lightning system including design.
? To understand the basic principle of electric traction including
speed?time curves of different traction services.
? To understand the method of calculation of various traction system
for braking, acceleration and other related parameters, including
demand side management of energy.
UNIT ? I:
Selection of Motors
Choice of motor, type of electric drives, starting and running characteristics?
Speed control?Temperature rise?Applications of electric drives?Types of
industrial loads?continuous?Intermittent and variable loads?Load
equalization.
UNIT ? II:
Electric Heating
Advantages and methods of electric heating?Resistance heating induction
heating and dielectric heating.
Electrical and Electronics Engineering
133
Electric Welding
Electric welding?Resistance and arc welding?Electric welding equipment?
Comparison between AC and DC Welding
UNIT ? III:
Illumination fundamentals
Introduction, terms used in illumination?Laws of illumination?Polar curves?
Integrating sphere?Lux meter?Sources of light
UNIT ? IV:
Various Illumination Methods
Discharge lamps, MV and SV lamps ? Comparison between tungsten
filament lamps and fluorescent tubes?Basic principles of light control? Types
and design of lighting and flood lighting?LED lighting.
UNIT ? V:
Electric Traction ? I
System of electric traction and track electrification? Review of existing
electric traction systems in India? Special features of traction motor?
Mechanics of train movement?Speed?time curves for different services ?
Trapezoidal and quadrilateral speed time curves.
UNIT ? VI:
Electric Traction ? II
Calculations of tractive effort? power ?Specific energy consumption for
given run?Effect of varying acceleration and braking retardation?Adhesive
weight and braking retardation adhesive weight and coefficient of adhesion?
Principles of energy efficient motors.
Learning Outcomes:
? Able to identify a suitable motor for electric drives and industrial
applications
? Able to identify most appropriate heating or welding techniques for
suitable applications.
? Able to understand various level of illuminosity produced by
different illuminating sources.
? Able to estimate the illumination levels produced by various sources
and recommend the most efficient illuminating sources and should
be able to design different lighting systems by taking inputs and
constraints in view.
Electrical and Electronics Engineering
134
? Able to determine the speed/time characteristics of different types of
traction motors.
? Able to estimate energy consumption levels at various modes of
operation.
Text Books:
1. Utilization of Electric Energy ? by E. Openshaw Taylor, Orient
Longman.
2. Art & Science of Utilization of electrical Energy ? by Partab,
DhanpatRai&
Sons.
Reference Books:
1. Utilization of Electrical Power including Electric drives and Electric
traction ? by N.V.Suryanarayana, New Age International (P) Limited,
Publishers, 1996.
2. Generation, Distribution and Utilization of electrical Energy ? by C.L.
Wadhwa, New Age International (P) Limited, Publishers, 1997.
Electrical and Electronics Engineering
135
T P C
III Year ? II SEMESTER
3+1 0 3
POWER SYSTEM ANALYSIS
Preamble:
The course is designed to give students the required knowledge for the design
and analysis of electrical power grids. Calculation of power flow in a power
system network using various techniques, formation of Zbus and its
importance are covered in this course. It also deals with short circuit analysis
and analysis of power system for steady state and transient stability.
Learning Objectives:
? To study the development of impedance diagram (p.u) and
formation of Ybus
? To study the Gauss Seidel, Newton raphson, decoupled and fast
decoupled load flow methods.
? To study the concept of the Zbusbuilding algorithm.
? To study short circuit calculation for symmetrical faultss
? To study the effect of unsymmetrical faults.
? To study the rotor angle stability analysis of power systems.
UNIT ?I:
Per Unit Representation & Topology
Per Unit Quantities?Single line diagram? Impedance diagram of a power
system ? Graph theory definition ? Formation of element node incidence and
bus incidence matrices ? Primitive network representation ? Formation of Y?
bus matrix by singular transformation and direct inspection methods.
UNIT ?II:
Power Flow Studies
Necessity of power flow studies ? Derivation of static power flow equations
? Power flow solution using Gauss-Seidel Method ? Newton Raphson
Method (Rectangular and polar coordinates form) ?Decoupled and Fast
Decoupled methods (Algorithmic approach) ? Problems on 3?bus system
only.
Electrical and Electronics Engineering
136
UNIT ?III:
Z?Bus formulation
Formation of Z?Bus: Partial network? Algorithm for the Modification of Zbus
Matrix for addition element for the following cases: Addition of element
from a new bus to reference? Addition of element from a new bus to an old
bus? Addition of element between an old bus to reference and Addition of
element between two old busses (Derivations and Numerical Problems).?
Modification of Z?Bus for the changes in network ( Problems).
UNIT ? IV:
Symmetrical Fault Analysis
3?Phase short circuit currents and reactances of synchronous machine?Short
circuit MVA calculations.
UNIT ?V:
Symmetrical Components & Fault analysis
Synthesis of unsymmetrical phasor from their symmetrical components?
Symmetrical components of unsymmetrical phasor?Phase - shift of
symmetrical components in Y??Power in terms of symmetrical
components ? Sequence networks ? Positive, negative and zero sequence
networks?Various types of faults LG? LL? LLG and LLL on unloaded
alternator?unsymmetrical faults on power system.
UNIT ? VI:
Power System Stability Analysis
Elementary concepts of Steady state? Dynamic and Transient Stabilities?
Description of Steady State Stability Power Limit?Transfer Reactance?
Synchronizing Power Coefficient ?Power Angle Curve and Determination of
Steady State Stability ?Derivation of Swing Equation?Determination of
Transient Stability by Equal Area Criterion?Application of Equal Area
Criterion?Methods to improve steady state and transient stability.
`
? Able to draw an impedance diagram for a power system network.
? Able to form a Ybus matrix for a power system network with or
without mutual couplings.
? Able to find out the load flow solution of a power system network
using different types of load flow methods.
? Able to formulate the Zbus for a power system network.
? Able to find out the fault currents for all types faults with a view to
provide data for the design of protective devices.
Electrical and Electronics Engineering
137
? Able to find out the sequence components of currents for any
unbalanced power system network.
? Able to analyze the steady state, transient and dynamic stability
concepts of a power system.
Text Books:
1. Power System Analysis by Grainger and Stevenson, Tata McGraw
Hill.
2. Electrical Power Systems by P.S.R.Murthy, B.S.Publications
3. Modern Power system Analysis ? by I.J.Nagrath&D.P.Kothari: Tata
Mc Graw?Hill Publishing Company, 2nd edition.
4. Power System Analysis and Design by J.Duncan Glover, M.S.Sarma,
T.J. Overbye ? CengageLearning publications.
Reference Books:
1. Power System Analysis ? by A.R.Bergen, Prentice Hall, Inc.
2. Power System Analysis by HadiSaadat ? TMH Edition.
3. Power System Analysis by B.R.Gupta, Wheeler Publications.
Electrical and Electronics Engineering
138
T P C
III Year ? II SEMESTER
3+1 0 3
POWER SEMICONDUCTOR DRIVES
Preamble:
This course is an extension of power electronics applications to electric
drives. This course covers in detail the basic and advanced speed control
techniques using power electronic converters that are used in industry. It is
equally important to understand the four quadrant operation of electric drives
and slip power recovery schemes in induction motors.
Learning Objectives:
? To learn the fundamentals of electric drive and different electric
braking methods.
? To analyze the operation of three phase converter controlled dc
motors and four quadrant operation of dc motors using dual
converters.
? To discuss the converter control of dc motors in various quadrants.
? To understand the concept of speed control of induction motor by
using AC voltage controllers and voltage source inverters.
? To learn the principles of static rotor resistance control and various
slip power recovery schemes.
? To understand the speed control mechanism of synchronous motors
UNIT?I:
Fundamentals of Electric Drives
Electric drive ? Fundamental torque equation ? Load torque components ?
Nature and classification of load torques ? Steady state stability ? Load
equalization? Four quadrant operation of drive (hoist control) ? Braking
methods: Dynamic ? Plugging ? Regenerative methods.
UNIT?II:
Three phase converter controlled DC motors
Revision of speed control techniques ? Separately excited and series motors
controlled by full converters ? Output voltage and current waveforms ?
Speed-torque expressions ? Speed-torque characteristics ? Numerical
problems ? Four quadrant operation using dual converters.
Electrical and Electronics Engineering
139
UNIT?III:
Control of DC motors by DC?DC converters (Type C & Type D)
Single quadrant ? Two quadrant and four quadrant chopper fed separately
excited and series excited motors ? Continuous current operation? Output
voltage and current waveforms ? Speed?torque expressions ? Speed?torque
characteristics ?Four quadrant operations ? Closed loop operation (Block
diagrams only).
UNIT?IV:
Induction motor control ? Stator side
Variable voltage characteristics?Control of Induction Motor by AC Voltage
Controllers ? Waveforms ?Speed torque characteristics? Variable Voltage
Variable Frequency control of induction motor by voltage source inverter ?
PWM control ? Closed loop operation of induction motor drives (Block
Diagram Only).
UNIT?V:
Control of Induction motor ? Rotor side
Static rotor resistance control ? Slip power recovery schemes ? Static
Scherbius drive ? Static Kramer drive ? Performance and speed torque
characteristics ? Advantages ?Applications.
UNIT?VI:
Control of Synchronous Motors
Separate control &self control of synchronous motors ? Operation of self
controlled synchronous motors by VSI? Closed Loop control operation of
synchronous motor drives (Block Diagram Only) ?Variable frequency
control?Pulse width modulation.
Learning Outcomes:
Student should be able to
? Explain the fundamentals of electric drive and different electric
braking methods.
? Analyze the operation of three phase converter controlled dc motors
and four quadrant operation of dc motors using dual converters.
? Explain the converter control of dc motors in various quadrants.
? Explain the concept of speed control of induction motor by using
AC voltage controllers and voltage source inverters.
? Explain the principles of static rotor resistance control and various
slip power recovery schemes.
Electrical and Electronics Engineering
140
? Explain the speed control mechanism of synchronous motors
Text Books:
1. Fundamentals of Electric Drives ? by G K Dubey Narosa Publications
2. Power Semiconductor Drives, by S.B. Dewan, G.R.Slemon,
A.Straughen, Wiley-India Edition.
Reference Books:
1. Electric Motors and Drives Fundamentals, Types and Apllications, by
Austin Hughes and Bill Drury, Newnes.
2. Thyristor Control of Electric drives ? Vedam Subramanyam Tata
McGraw Hill Publications.
3. Power Electronic Circuits, Devices and applications by M.H. Rashid,
PHI
4. Power Electronics handbook by Muhammad H.Rashid, Elsevier.
***
Electrical and Electronics Engineering
141
T P C
III Year ? II SEMESTER
3+1 0 3
MANAGEMENT SCIENCE
Note: Please collect from respective Department.
Electrical and Electronics Engineering
142
T P C
III Year ? II SEMESTER
0 3 2
POWER ELECTRONICS LAB
Learning objectives:
? To study the characteristics of various power electronic devices and
analyze firing circuits and commutation circuits of SCR.
? To analyze the performance of single?phase and three?phase full?
wave bridge converters, single?phase dual converter with both
resistive and inductive loads.
? To understand the operation of AC voltage controller and cyclo
converter with resistive and inductive loads.
? To understand the working of Buck converter, Boost converter,
single?phase bridge inverter and PWM inverter.
Any 10 of the Following Experiments are to be conducted
1. Study of Characteristics of SCR, MOSFET & IGBT
2. Gate firing circuits for SCR's
3. Single -Phase Half controlled converter with R and RL load
4. Single -Phase fully controlled bridge converter with R and RL loads
5. Single -Phase AC Voltage Controller with R and RL Loads
6. Single -Phase Cyclo?converter with R and RL loads
7. Single -Phase Bridge Inverter with R and RL Loads
8. Single -Phase dual converter with RL loads
9. Three -Phase half controlled bridge converter with RL load.
10. Three- Phase full converter with RL?load.
11. DC?DC buck converter.
12. DC?DC boost converter.
13. Single -phase PWM inverter.
14. Single -phase diode bridge rectifier with R load and capacitance filter.
15. Forced commutation circuits(Class A, Class B, Class C, Class D and
Class E)
Electrical and Electronics Engineering
143
Learning outcomes:
? Able to study the characteristics of various power electronic devices
and analyze firing circuits and commutation circuits of SCR.
? Able to analyze the performance of single?phase and three?phase
full?wave bridge converters, single?phase dual converter with both
resistive and inductive loads.
? Able to understand the operation of AC voltage controller and cyclo
converter with resistive and inductive loads.
? Able to understand the working of Buck converter, Boost converter,
single?phase bridge inverter and PWM inverter.
Electrical and Electronics Engineering
144
T P C
III Year ? II SEMESTER
0 3 2
ELECTRICAL MEASUREMENTS LAB
Learning Objectives:
? To understand the correct function of electrical parameters and
calibration of voltage, current, single phase and three phase power and
energy, and measurement of electrical characteristics of resistance,
inductance and capacitance of a circuits through appropriate methods.
? To understand measurement of illumination of electrical lamps.
? To understand testing of transformer oil.
? To measure the parameters of choke coil.
Any 10 of the following experiments are to be conducted
1.
Calibration and Testing of single phase energy Meter
2.
Calibration of dynamometer wattmeter using phantom loading UPF
3. Crompton D.C. Potentiometer ? Calibration of PMMC ammeter and
PMMC voltmeter
4.
Kelvin's double Bridge ? Measurement of resistance ? Determination of
Tolerance.
5.
Capacitance Measurement using Schering bridge.
6.
Inductance Measurement using Anderson bridge.
7.
Measurement of 3 phase reactive power with single?phase wattmeter
for balanced loading.
8.
Measurement of complex power with Trivector meter and verification.
9.
Optical bench ? Determination of polar curve measurement of MHCP of
electrical lamp.
10. Calibration of LPF wattmeter ? by direct loading.
11. Measurement of 3 phase power with single watt meter and 2 No's of
C.T.
12. C.T. testing using mutual Inductor ? Measurement of % ratio error and
phase angle of given C.T. by Null method.
13. P.T. testing by comparison ? V.G. as Null detector ? Measurement of %
ratio error and phase angle of the given P.T.
14. Dielectric oil testing using H.T. testing Kit
Electrical and Electronics Engineering
145
15. LVDT and capacitance pickup ? characteristics and Calibration
16. Resistance strain gauge ? strain measurements and Calibration
17. Polar curve using Lux meter, Measurement of intensity of illumination
of fluorescent lamp.
18. Transformer turns ratio measurement using AC. bridge.
19. A.C. Potentiometer ? Polar form/Cartesian form ? Calibration of AC
Voltmeter, Parameters of Choke.
20. Measurement of Power by 3 Voltmeter and 3 Ammeter methods.
21. Parameters of choke coil.
Learning Outcomes:
? To be able to measure accurately the electrical parameters voltage,
current, power, energy and electrical characteristics of resistance,
inductance and capacitance.
? To be able to measure illumination of electrical lamps.
? To be able to test transformer oil for its effectiveness.
? To be able to measure the parameters of inductive coil.
Electrical and Electronics Engineering
146
T P C
IV Year ? I SEMESTER
3+1 0 3
RENEWABLE ENERGY SOURCES AND SYSTEMS
Preamble:
This course gives a flavor of renewable sources and systems to the students.
It introduces solar energy its radiation, collection, storage and its
applications. This covers generation, design, efficiency and characteristics of
various renewable energy sources including solar, wind, hydro, biomass, fuel
cells and geothermal systems.
Learning Objectives:
? To study the solar radiation data, extra terrestrial radiation, radiation
on earth's surface.
? To study solar thermal collections.
? To study solar photo voltaic systems.
? To study maximum power point techniques in solar pv and wind.
? To study wind energy conversion systems, Betz coefficient, tip
speed ratio.
? To study basic principle and working of hydro, tidal, biomass, fuel
cell and geothermal systems.
UNIT?I:
Fundamentals of Energy Systems
Energy conservation principle ? Energy scenario (world and India) ? Solar
radiation: Outside earth's atmosphere ? Earth surface ? Analysis of solar
radiation data ? Geometry ? Radiation on tilted surfaces ? Numerical
problems.
UNIT?II:
Solar Thermal Systems
Liquid flat plate collections: Performance analysis ? Transmissivity ?
Absorptivity product collector efficiency factor ? Collector heat removal
factor ? Numerical problems. Introduction to solar air heaters ?
Concentrating collectors and solar pond.
Electrical and Electronics Engineering
147
UNIT?III:
Solar Photovoltaic Systems
Balance of systems ? IV characteristics ? System design: storage sizing ? PV
system sizing ? Maximum power point techniques: Perturb and observe
(P&O) technique ? Hill climbing technique.
UNIT?IV:
Wind Energy
Wind patterns ? Types of turbines ? Kinetic energy of wind ? Betz
coefficient ? Tip?speed ratio ? Efficiency ? Power output of wind turbine ?
Selection of generator(synchronous, induction) ? Maximum power point
tracking.
UNIT?V:
Hydro and Tidal power systems
Basic working principle ? Classification of hydro systems: Large, small,
micro ? measurement of head and flow ? Energy equation ? Types of
turbines ? Numerical problems.
Tidal power ? Basics ? Kinetic energy equation ? Numerical problems ?
Wave power ? Basics ? Kinetic energy equation.
UNIT?VI:
Biomass, fuel cells and geothermal systems
Biomass Energy: Fuel classification ? Pyrolysis ? Direct combustion of heat
? Different digesters and sizing.
Fuel cell: Classification ? Efficiency ? VI characteristics.
Geothermal: Classification ? Dry rock and acquifer ? Energy analysis.
Learning Outcomes:
Student should be able to
? Analyze solar radiation data, extraterrestrial radiation, radiation on
earth's surface.
? Design solar thermal collections.
? Design solar photo voltaic systems.
? Develop maximum power point techniques in solar PV and wind.
? Explain wind energy conversion systems, Betz coefficient, tip speed
ratio.
? Explain basic principle and working of hydro, tidal, biomass, fuel
cell and geothermal systems.
Electrical and Electronics Engineering
148
Text Books:
1. Solar Energy: Principles of Thermal Collection and Storage, S. P.
Sukhatme and J. K. Nayak, TMH, New Delhi, 3rd Edition.
2. Renewable Energy Resources, John Twidell and Tony Weir, Taylor
and Francis -second edition,2013.
3. Energy Science: Principles, Technologies and Impacts, John
Andrews and Nick Jelly, Oxford.
Reference Books:
1. Renewable Energy- Edited by Godfrey Boyle-oxford university,
press, 3rd edition, 2013.
2. Handbook of renewable technology Ahmed and Zobaa, Ramesh C
Bansal, World scientific, Singapore.
3. Renewable Energy Technologies /Ramesh & Kumar /Narosa.
4. Renewable energy technologies ? A practical guide for beginners ?
Chetong Singh Solanki, PHI.
5. Non conventional energy source ?B.H. Khan- TMH-2nd edition.
Electrical and Electronics Engineering
149
T P C
IV Year ? I SEMESTER
3+1 0 3
HVAC & DC TRANSMISSION
Preamble:
With the increasing power generation in the country and long distance power
transmission, it is necessary that power should be transmitted at extra and
ultra high voltage. The topics dealt in this subject relate to phenomena
associated with transmission line at higher voltages, equipments generating
high voltage and power control strategy.
Learning Objectives:
? To understand the phenomena associated with transmission line,
operating at extra high voltages. The unit gives detail analysis of
several phenomena viz. electrostatic field, charges, voltage gradient
and conductor configuration.
? The objective is to discuss phenomena of corona, losses, audible
noise, radio interference and measurement of these quantities.
? To understand the phenomena of HVDC, HVDC equipment
comparison with AC and the latest state of art in HVDC
transmission.
? To understand method of conversion of AC to DC, performance of
various level of pulse conversion and control characteristics of
conversion. It also provides knowledge of effect of source
inductance as well as method of power control.
? To understand the requirements of reactive power control and
filtering technique in HVDC system.
? To understand the harmonics in AC side of power line in a HVDC
system and design of filters for various levels of pulse conversion.
Unit ? I:
Introduction of EHV AC transmission
Necessity of EHV AC transmission ? Advantages and problems ? Power
handling capacity and line losses ? Mechanical considerations ? Resistance
of conductors ?Electrostatics ? Field of sphere gap ? Field of line charges
and properties ? Charge ~ potential relations for multi?conductors ? Surface
voltage gradient on conductors ? Bundle spacing and bundle radius ?
Electrical and Electronics Engineering
150
Examples ? Distribution of voltage gradient on sub conductors of bundle ?
Examples.
Unit ? II:
Corona effects
Power loss and audible noise (AN) ? Corona loss formulae ? Charge voltage
diagram ? Generation ? Characteristics ? Limits and measurements of AN ?
Relation between 1?phase and 3?phase AN levels ? Examples ? Radio
interference (RI) ? Corona pulses generation ? Properties and limits ?
Frequency spectrum ? Modes of propagation ? Excitation function ?
Measurement of RI, RIV and excitation functions ? Examples.
UNIT ? III:
Basic Concepts of DC Transmission
Economics & Terminal equipment of HVDC transmission systems: Types of
HVDC Links ? Apparatus required for HVDC Systems ? Comparison of AC
&DC transmission ? Application of DC Transmission System ? Planning &
Modern trends in DC transmission.
UNIT ? IV:
Analysis of HVDC Converters and System Control
Choice of Converter configuration ? Analysis of Graetz ? Characteristics of 6
Pulse & 12 Pulse converters ? Cases of two 3 phase converters in star ? Star
mode and their performance ? Principal of DC Link Control ? Converters
Control Characteristics ? Firing angle control ? Current and extinction angle
control ? Effect of source inductance on the system ? Starting and stopping
of DC link ? Power Control.
UNIT?V:
Reactive Power Control in HVDC
Reactive Power Requirements in steady state ? Conventional control
strategies ?Alternate control strategies sources of reactive power ? AC Filters
? Shunt capacitors ? Synchronous condensers.
UNIT ? VI:
Harmonics and Filters
Generation of Harmonics ? Characteristics harmonics ? Calculation of AC
Harmonics ? Non?Characteristics harmonics ? Adverse effects of harmonics
? Calculation of voltage & current harmonics ? Effect of Pulse number on
harmonics. Types of AC filters, Design of Single tuned filters ? Design of
High pass filters.
Electrical and Electronics Engineering
151
Learning Outcomes:
? To be able to acquaint with HV transmission system with regard to
power handling capacity, losses, conductor resistance and
electrostatic field associate with HV. Further knowledge is gained in
area of bundle conductor system to improve electrical and
mechanical performance.
? To develop ability for determining corona, radio interference,
audible noise generation and frequency spectrum for single and
three phase transmission lines.
? To be able to acquire knowledge in transmission of HVDC power
with regard to terminal equipments, type of HVDC connectivity and
planning of HVDC system.
? To be able to develop knowledge with regard to choice of pulse
conversion, control characteristic, firing angle control and effect of
source impedance.
? To develop knowledge of reactive power requirements of
conventional control, filters and reactive power compensation in
AC. side of HVDC system.
? Able to calculate voltage and current harmonics, and design of
filters for six and twelve pulse conversion.
Text Books:
1. HVDC Power Transmission Systems: Technology and system
Interactions ? by K.R.Padiyar, New Age International (P) Limited,
and Publishers.
2. Direct Current Transmission ? by E.W.Kimbark, John Wiley &
Sons.
3. EHVAC Transmission Engineering by R. D. Begamudre, New Age
International (P) Ltd.
Reference Books:
1. EHVAC and HVDC Transmission Engineering and Practice ?
S.Rao.
2. Power Transmission by Direct Current ? by E.Uhlmann,
B.S.Publications
3. HVDC Transmission ? J. Arrillaga.
Electrical and Electronics Engineering
152
T P C
IV Year ? I SEMESTER
3+1 0 3
POWER SYSTEM OPERATION AND CONTROL
Preamble:
This subject deals with Economic operation of Power Systems, Hydrothermal
scheduling and modeling of turbines, generators and automatic controllers. It
emphasizes on single area and two area load frequency control and reactive
power control.
Learning Objectives:
? To understand optimal dispatch of generation with and without
losses.
? To study the optimal scheduling of hydro thermal systems.
? To study the optimal unit commitment problem.
? To study the load frequency control for single area system
? To study the PID controllers for single area system and two area
system.
? To understand the reactive power control and compensation of
transmission lines.
UNIT?I:
Economic Operation of Power Systems
Optimal operation of Generators in Thermal power stations, ? Heat rate curve
? Cost Curve ? Incremental fuel and Production costs ? Input?output
characteristics ? Optimum generation allocation with line losses neglected ?
Optimum generation allocation including the effect of transmission line
losses ? Loss Coefficients ? General transmission line loss formula.
UNIT?II:
Hydrothermal Scheduling
Optimal scheduling of Hydrothermal System: Hydroelectric power plant
models ? Scheduling problems ? Short term Hydrothermal scheduling
problem.
UNIT?III:
Unit Commitment
Electrical and Electronics Engineering
153
Optimal unit commitment problem ? Need for unit commitment ? Constraints
in unit commitment ? Cost function formulation ? Solution methods ?
Priority ordering ? Dynamic programming.
UNIT?IV:
Load Frequency Control
Modeling of steam turbine ? Generator ? Mathematical modeling of speed
governing system ? Transfer function ? Modeling of Hydro turbine ?
Necessity of keeping frequency constant ? Definitions of Control area ?
Single area control ? Block diagram representation of an isolated power
system ? Steady state analysis ? Dynamic response ? Uncontrolled case ?
Load frequency control of two area system ? Uncontrolled case and
controlled case ? Tie?line bias control.
UNIT?V:
Load Frequency Controllers
Proportional plus Integral control of single area and its block diagram
representation ? Steady state response ? Load Frequency Control and
Economic dispatch control.
UNIT?VI:
Reactive Power Control
Overview of Reactive Power control ? Reactive Power compensation in
transmission systems ? Advantages and disadvantages of different types of
compensating equipment for transmission systems ? Load compensation ?
Specifications of load compensator ? Uncompensated and compensated
transmission lines: Shunt and series compensation ? Need for FACTS
controllers.
Learning Outcomes:
? Able to compute optimal scheduling of Generators.
? Able to understand hydrothermal scheduling.
? Understand the unit commitment problem.
? Able to understand importance of the frequency.
? Understand importance of PID controllers in single area and two
area systems.
? Will understand reactive power control and line power
compensation.
Text Books:
1.
Electric Energy systems Theory ? by O.I.Elgerd, Tata McGraw?hill
Publishing Company Ltd., Second edition.
Electrical and Electronics Engineering
154
2.
Power System stability & control, Prabha Kundur,TMH
3.
Modern Power System Analysis ? by I.J.Nagrath & D.P.Kothari
Tata Mc Graw ? Hill Publishing Company Ltd, 2nd edition.
Reference Books:
1. Power System Analysis and Design by J.Duncan Glover and
M.S.Sarma, THOMPSON, 3rd Edition.
2.
Power System Analysis by Grainger and Stevenson, Tata McGraw
Hill.
3.
Power System Analysis by Hadi Saadat ? TMH Edition.
Electrical and Electronics Engineering
155
T P C
IV Year ? I SEMESTER
3+1 0 3
Open Elective
ENERGY AUDIT, CONSERVATION & MANAGEMENT
Preamble:
This is an open elective course developed to cater current needs of the
industry. This course covers topics such as energy conservation act and
energy conservation. It also covers energy efficient lighting design, student
will learn power factor improvement techniques, energy efficiency in HVAC
systems. In addition, economic aspects such as payback period calculations,
life cycle costing analysis is covered in this course.
Learning Objectives:
? To understand energy efficiency, scope, conservation and
technologies.
? To design energy efficient lighting systems.
? To estimate/calculate power factor of systems and propose suitable
compensation techniques.
? To understand energy conservation in HVAC systems.
? To calculate life cycle costing analysis and return on investment on
energy efficient technologies.
Unit?I:
Basic Principles of Energy Audit and management
Energy audit ? Definitions ? Concept ? Types of audit ? Energy index ? Cost
index ? Pie charts ? Sankey diagrams ? Load profiles ? Energy conservation
schemes and energy saving potential ? Numerical problems ? Principles of
energy management ? Initiating, planning, controlling, promoting,
monitoring, reporting ? Energy manager ? Qualities and functions ?
Language ? Questionnaire ? Check list for top management.
Unit?II:
Lighting
Modification of existing systems ? Replacement of existing systems ?
Priorities: Definition of terms and units ? Luminous efficiency ? Polar curve
? Calculation of illumination level ? Illumination of inclined surface to beam
? Luminance or brightness ? Types of lamps ? Types of lighting ? Electric
Electrical and Electronics Engineering
156
lighting fittings (luminaries) ? Flood lighting ? White light LED and
conducting Polymers ? Energy conservation measures.
Unit?III:
Power Factor and energy instruments
Power factor ? Methods of improvement ? Location of capacitors ? Power
factor with non linear loads ? Effect of harmonics on Power factor ?
Numerical problems. Energy Instruments ? Watt?hour meter ? Data loggers
? Thermocouples ? Pyrometers ? Lux meters ? Tong testers ? Power
analyzer.
Unit?IV:
Space Heating and Ventilation
Ventilation ? Air?Conditioning (HVAC) and Water Heating: Introduction ?
Heating of buildings ? Transfer of Heat?Space heating methods ? Ventilation
and air?conditioning ? Insulation?Cooling load ? Electric water heating
systems ? Energy conservation methods.
Unit?V
Economic Aspects and Analysis
Economics Analysis ? Depreciation Methods ? Time value of money ? Rate
of return ? Present worth method ? Replacement analysis ? Life cycle costing
analysis ? Energy efficient motors (basic concepts).
Unit?VI:
Computation of Economic Aspects
Calculation of simple payback method ? Net present worth method ? Power
factor correction ? Lighting ? Applications of life cycle costing analysis ?
Return on investment.
Learning Outcomes:
Student will be able to
? Explain energy efficiency, conservation and various technologies.
? Design energy efficient lighting systems.
? Calculate power factor of systems and propose suitable
compensation techniques.
? Explain energy conservation in HVAC systems.
? Calculate life cycle costing analysis and return on investment on
energy efficient technologies.
Electrical and Electronics Engineering
157
Text Books:
1. Energy management by W.R. Murphy & G. Mckay Butter worth,
Elsevier publications. 2012
2. Energy efficient electric motors by John .C. Andreas, Marcel Dekker
Inc Ltd?2nd edition, 1995
Reference Books:
1. Electric Energy Utilization and Conservation by S C Tripathy, Tata
McGraw hill publishing company Ltd. New Delhi.
2. Energy management by Paul o' Callaghan, Mc?Graw Hill Book
company?1st edition, 1998.
3. Energy management hand book by W.C.Turner, John wiley and sons.
4. Energy management and conservation ?k v Sharma and pvenkata
seshaiah-I K International Publishing House pvt.ltd,2011.
5. http://www.energymanagertraining.com/download/Gazette_of_IndiaP
artIISecI-37_25-08-2010.pdf
Note : This Elective can be offered to Students of All Branches including
EEE
Electrical and Electronics Engineering
158
INSTRUMENTATION
(Open Elective)
Preamble:
Electrical and Electronic Instrumentation plays a key role in the industry.
With the advancement of technology day to day manual maintenance is
replaced by simply monitoring using various instruments. Thus this course
plays very important role in overall maintenance of the industry.
Learning Objectives:
? To study various types of signals and their representation.
? To study various types of transducers: Electrical, Mechanical,
Electromechanical, Optical etc.
? To study and measure the various types of Non?electrical
quantities.
? To study various types of digital voltmeters
? To study the working principles of various types of
oscilloscopes and their applications.
? To study various types of signal analyzers.
UNIT?I:
Signals and their representation
Measuring Systems, Performance Characteristics, ? Static characteristics ?
Dynamic Characteristics ? Errors in Measurement ? Gross Errors ?
Systematic Errors ? Statistical analysis of random errors ? Signal and their
representation ? Standard test, periodic, aperiodic, modulated signal ?
Sampled data pulse modulation and pulse code modulation.
UNIT?II:
Transducers
Definition of transducers ? Classification of transducers ? Advantages of
Electrical transducers ? Characteristics and choice of transducers ? Principle
operation of resistor, inductor, LVDT and capacitor transducers ? LVDT
Applications ? Strain gauge and its principle of operation ? Guage factor ?
Thermistors ? Thermocouples ? Synchros ? Piezo electric transducers ?
Photo diodes.
Electrical and Electronics Engineering
159
UNIT?III:
Measurement of Non?Electrical Quantities
Measurement of strain ? Gauge Sensitivity ? Displacement ? Velocity ?
Angular Velocity ? Acceleration ? Force ? Torque ? Measurement of
Temperature, Pressure, Vacuum, Flow, Liquid level.
UNIT?IV:
Digital Voltmeters
Digital voltmeters ? Successive approximation, ramp, dual?Slope integration
continuous balance type ? Micro processor based ramp type ? DVM digital
frequency meter ? Digital phase angle meter.
UNIT?V:
Oscilloscope
Cathode ray oscilloscope ? Time base generator ? Horizantal and vertical
amplifiers ? Measurement of phase and frequency ? Lissajous patterns ?
Sampling oscilloscope ? Analog and digital type data loger ? Transient
recorder.
UNIT?VI:
Signal Analyzers
Wave Analyzers ? Frequency selective analyzers ? Heterodyne ? Application
of Wave analyzers ? Harmonic Analyzers ? Total Harmonic distortion ?
Spectrum analyzers ? Basic spectrum analyzers ? Spectral displays ? Vector
impedance meter ? Q meter ? Peak reading and RMS voltmeters.
Learning Outcomes:
? Able to represent various types of signals .
? Acquire proper knowledge to use various types of Transducers.
? Able to monitor and measure various parameters such as strain,
velocity, temperature, pressure etc.
? Acquire proper knowledge and working principle of various
types of digital voltmeters.
? Able to measure various parameter like phase and frequency of
a signal with the help of CRO.
? Acquire proper knowledge and able to handle various types of
signal analyzers.
Text Books:
Electrical and Electronics Engineering
160
1. Electronic Instrumentation?by H.S.Kalsi Tata MCGraw?Hill Edition,
1995.
2. A course in Electrical and Electronic Measurements and
Instrumentation, A.K. Sawhney, Dhanpatrai& Co.
Reference Books:
1. Measurement and Instrumentation theory and application, Alan
S.Morris and Reza Langari, Elsevier
2. Measurements Systems, Applications and Design ? by D O Doeblin
3. Principles of Measurement and Instrumentation ? by A.S Morris,
Pearson / Prentice Hall ofIndia
4. Modern Electronic Instrumentation and Measurement techniques ? by
A.D Helfrickand W.D. Cooper, Pearson/Prentice Hall of India.
4. Transducers and Instrumentation by D.V.S Murthy, Prentice Hall of
India.
Note : This Elective can be offered to Students of All Branches including
EEE
Electrical and Electronics Engineering
161
NON?CONVENTIONAL SOURCES OF ENERGY
(Open Elective)
Preamble:
This course gives a flavor of non?conventional sources of energy to the
students. It introduces solar energy its radiation, collection, storage and its
applications. This covers generation, design, efficiency and characteristics of
various non?conventional energy sources including solar, wind, hydro,
biomass, fuel cells and geothermal systems.
Learning Objectives
? To study the solar radiation data, extraterrestrial radiation, radiation
on earth's surface.
? To study solar thermal collections.
? To study solar photo voltaic systems.
? To study maximum power point techniques in solar pv and wind.
? To study wind energy conversion systems, Betz coefficient , tip
speed ratio.
? To study basic principle and working of hydro, tidal, biomass, fuel
cell and geothermal systems.
UNIT?I:
Fundamentals of Energy Systems
Energy conservation principle ? Energy scenario (world and India) ? Solar
radiation: Outside earth's atmosphere ? Earth surface ? Analysis of solar
radiation data ? Geometry ? Radiation on tilted surfaces ? Numerical
problems.
UNIT?II:
Solar Thermal Systems
Liquid flat plate collections: Performance analysis ? Transmissivity ?
Absorptivity ? Product collector efficiency factor ? Collector heat removal
factor ? Numerical problems ? Introduction to solar air heaters ?
Concentrating collectors and solar pond.
UNIT?III:
Solar Photovoltaic Systems
Balance of systems ? IV characteristics ? System design: Storage sizing, PV
system sizing, Maximum power point techniques: Perturb and observe
(P&O) technique ? Hill climbing technique.
Electrical and Electronics Engineering
162
UNIT?IV:
Wind Energy
Wind patterns ? Types of turbines ? Kinetic energy of wind ? Betz
coefficient ? Tip?speed ratio ? efficiency ? Power output of wind turbine ?
Selection of generator(synchronous, induction) ? Maximum power point
tracking.
UNIT?V:
Hydro and Tidal power systems
Basic working principle ? Classification of hydro systems: large, small,
micro ? Measurement of head and flow ? Energy equation ? Types of
turbines ? Numerical problems.
Tidal power ? Basics ? Kinetic energy equation ? Numerical problems ?
Wave power ? Basics ? Kinetic energy equation.
UNIT?VI:
Biomass, fuel cells and geothermal systems
Biomass Energy: Fuel classification ? Pyrolysis ? Direct combustion of heat
? Different digesters and sizing.
Fuel cell: classification ? Efficiency ? VI characteristics.
Geothermal: classification ? Dry rock and acquifer ? Energy analysis.
Learning Outcomes:
Student should be able to
? Analyze solar radiation data, extraterrestrial radiation, radiation on
earth's surface.
? Design solar thermal collections.
? Design solar photo voltaic systems.
? Develop maximum power point techniques in solar PV and wind.
? Explain wind energy conversion systems, Betz coefficient , tip speed
ratio.
? Explain basic principle and working of hydro, tidal, biomass ,fuel
cell and geothermal systems.
Text Books:
1. Solar Energy: Principles of Thermal Collection and Storage, S. P.
Sukhatme and J. K. Nayak, TMH, New Delhi, 3rd Edition
2. Renewable Energy Resources, John Twidell and Tony Weir, Taylor
and Francis
Electrical and Electronics Engineering
163
3. Energy Science: Principles, Technologies and Impacts, John
Andrews and Nick Jelly, Oxford.
Reference Books:
1. Handbook of renewable technology Ahmed and Zobaa, Ramesh C
Bansal,World scientific, Singapore.
2. Renewable Energy Technologies /Ramesh & Kumar /Narosa.
3. Renewable energy technologies ? A practical guide for beginners ?
Chetong Singh Solanki, PHI.
Note : This Elective can be offered to Students of All Branches including
EEE
***
Electrical and Electronics Engineering
164
OPTIMIZATION TECHNIQUES
(Open Elective)
Preamble:
Optimization techniques have gained importance to solve many engineering
design problems by developing linear and nonlinear mathematical models.
The aim of this course is to educate the student to develop a mathematical
model by defining an objective function and constraints in terms of design
variables and then apply a particular mathematical programming technique.
This course covers classical optimization techniques, linear programming,
nonlinear programming and dynamic programming techniques.
Learning Objectives:
1. To define an objective function and constraint functions in terms of
design variables, and then state the optimization problem.
2. To state single variable and multi variable optimization problems,
without and with constraints.
3. To explain linear programming technique to an optimization
problem, define slack and surplus variables, by using Simplex
method.
4. To state transportation and assignment problem as a linear
programming problem to determine optimality conditions by using
Simplex method.
5. To study and explain nonlinear programming techniques,
unconstrained or constrained, and define exterior and interior
penalty functions for optimization problems.
6. To explain Dynamic programming technique as a powerful tool for
making a sequence of interrelated decisions.
UNIT ? I:
Introduction and Classical Optimization Techniques:
Statement of an Optimization problem ? design vector ? design constraints ?
constraint surface ? objective function ? objective function surfaces ?
classification of Optimization problems.
UNIT ? II:
Classical Optimization Techniques
Single variable Optimization ? multi variable Optimization without
constraints ? necessary and sufficient conditions for minimum/maximum ?
multivariable Optimization with equality constraints. Solution by method of
Electrical and Electronics Engineering
165
Lagrange multipliers ? multivariable Optimization with inequality constraints
? Kuhn ? Tucker conditions.
UNIT ? III:
Linear Programming
Standard form of a linear programming problem ? geometry of linear
programming problems ? definitions and theorems ? solution of a system of
linear simultaneous equations ? pivotal reduction of a general system of
equations ? motivation to the simplex method ? simplex algorithm - Duality
in Linear Programming ? Dual Simplex method.
UNIT ? IV:
Transportation Problem
Finding initial basic feasible solution by north ? west corner rule, least cost
method and Vogel's approximation method ? testing for optimality of
balanced transportation problems ? Special cases in transportation problem.
UNIT ? V:
Nonlinear Programming:
Unconstrained cases - One ? dimensional minimization methods:
Classification, Fibonacci method and Quadratic interpolation method -
Univariate method, Powell's method and steepest descent method.
Constrained cases - Characteristics of a constrained problem, Classification,
Basic approach of Penalty Function method; Basic approaches of Interior and
Exterior penalty function methods. Introduction to convex Programming
Problem.
UNIT ? VI:
Dynamic Programming:
Dynamic programming multistage decision processes ? types ? concept of
sub optimization and the principle of optimality ? computational procedure in
dynamic programming ? examples illustrating the calculus method of
solution - examples illustrating the tabular method of solution.
Learning Outcomes:
The student should be able to:
1. State and formulate the optimization problem, without and with
constraints, by using design variables from an engineering design
problem.
Electrical and Electronics Engineering
166
2. Apply classical optimization techniques to minimize or maximize a
multi-variable objective function, without or with constraints, and
arrive at an optimal solution.
3. Formulate a mathematical model and apply linear programming
technique by using Simplex method. Also extend the concept of dual
Simplex method for optimal solutions.
4. Solve transportation and assignment problem by using Linear
programming Simplex method.
5. Apply gradient and non-gradient methods to nonlinear optimization
problems and use interior or exterior penalty functions for the
constraints to derive the optimal solutions.
6. Formulate and apply Dynamic programming technique to inventory
control, production planning, engineering design problems etc. to
reach a final optimal solution from the current optimal solution.
Text Books:
1. "Engineering optimization: Theory and practice"-by S. S.Rao, New
Age International (P) Limited, 3rd edition, 1998.
2. "Introductory Operations Research" by H.S. Kasene & K.D. Kumar,
Springer (India), Pvt. LTd.
Reference Books:
1. "Optimization Methods in Operations Research and systems
Analysis" ? by
K.V. Mital and C. Mohan, New Age International (P) Limited,
Publishers, 3rd edition, 1996.
2. Operations Research ? by Dr. S.D.Sharma, Kedarnath, Ramnath & Co
3. "Operations Research: An Introduction" ? by H.A.Taha, PHI Pvt.
Ltd., 6th edition
4. Linear Programming?by G.Hadley.
***
Note : This Elective can be offered to Students of All Branches except
EEE
Electrical and Electronics Engineering
167
T P C
IV Year ? I SEMESTER
3+1 0 3
Elective ? I
VLSI DESIGN
Preamble:
In the recent times fabrication technology is revolutionized and especially
LSI has become so dense that on a single IC tens and thousands of transistors
are placed. Thus integrated circuits have become integrated systems and the
development of fabrication technology VLSI plays very important role.
Learning Objectives:
? To provide the basic fundamentals of fabrication technology,
generations of IC and speed, power consumptions of various
fabrication technologies.
? To understand the knowledge of electrical properties of MOS
circuits.
? To learn the design concepts of stick diagrams, layouts for various
MOS technologies.
? To understand the concepts of design rules, scaling, subsystem
design semiconductor IC design.
? To understand the synthesis, simulation design verification tools,
CMOS testing.
Unit ?I
Introduction
Introduction to IC technology ? The IC era ? MOS and related VLSI
technology ? Basic MOS transistors ? Enhancement and depletion modes of
transistor action ? IC production process ? MOS and CMOS fabrication
process ? BiCMOS technology ? Comparison b/w CMOS and bipolar
technologies.
Unit ? II
Basic electrical properties of MOS and BiCMOS circuits
Ids?Vds relationships ? Aspects of MOS transistor threshold voltage ? MOS
Trans?conductance and output conductance ? MOS Transistor ? Figure of
merit ? The pMOS transistor ? The nMOS inverter ? Determination of pull?
up to pull?down ratio for nMOS inverter driven by another nMOS inverter
Electrical and Electronics Engineering
168
for an nMOS inverter driven through one or more pass Transistors ?
Alternative forms of pull up ? The CMOS Inverter MOS transistor Circuit
model ? Bi?CMOS Inverters.
Unit ? III
MOS and BiCOMS circuit design processes
MOS layers ? Stick diagrams ? Design rules and layout ? General
observation on the design rules, 2m double metal, double poly ?
CMOS/BiCMOS rules, 1.2m Double metal, Double poly CMOS rules ?
Layout diagrams of NAND and NOR gates and CMOS inverter ? Symbolic
Diagrams ? Translation to Mask Form.
Unit ? IV
Basic circuit concepts
Sheet resistance ? Sheet resistance concept applied to MOS transistor and
inverters ? Area capacitance of layers ? Standard unit of capacitance ? Some
area capacitance calculations ? The delay unit ? Inverter delays ? Driving
large capacitive loads ? Propagations Delays ? Wiring Capacitance ? Fan?in
and Fan?out characteristics ? Choice of layers ? Transistor switches ?
Realization of gates using nMOS, pMOS and CMOS technologies.
Unit ? V
Scaling of MOS circuit
Scaling models and scaling factors ? Scaling factors for device parameters ?
Limitations of scaling ? Limits due to sub threshold currents ? Limits on
logic level and supply voltage due to noise ? Limits due to current density ?
Some architectural Issues ? Introduction to switch logic and gate logic.
Unit ? VI
Digital design using HDL
Digital system design process ? VLSI Circuit Design Process ? Hardware
simulation ? Hardware Synthesis ? History of VHDL ? VHDL requirements
? Levels of abstraction ? Elements of VHDL ? Packages ? Libraries and
bindings ? Objects and classes ? Variable assignments ? Sequential
statements ? Usage of subprograms ? Comparison of VHDL and verilog
HDL.
VHDL MODELLING
Simulation ? Logic Synthesis ? Inside a logic synthesizer ? Constraints ?
Technology libraries ? VHDL and logic synthesis ? Functional gate ? Level
verification ? Place and route ? Post layout timing simulation ? Static timing
Electrical and Electronics Engineering
169
? Major net list formats for design representation ? VHDL synthesis ?
Programming approach.
Learning Outcomes
? Ability to demonstrate the fundamentals of IC technology such as
various MOS fabrication technologies.
? Ability to calculate electrical properties of MOS circuits such as Ids
? Vds relationship, Vt, gm, gds, figure of merit, sheet resistance,
area capacitance.
? Ability to demonstrate semi conductor IC design such as PLA's,
PAL, FPGA, CPLS's design.
? Ability to demonstrate VHDL synthesis, simulation, design capture
tools design verification tools, CMOS testing.
Text Books:
1. Essentials of VLSI Circuits and Systems?Kamran Eshraghian,
Douglas and A.Pucknell and Sholeh Eshraghian, Prentice?Hall of
India Private Limited, 2005 Edition.
2. VLSI Design?K. Lal Kishor and V.S.V.Prabhakar, I.K. International
Publishing House Private Limited, 2009 First Edition.
3. VLSI Design?A.Shanthi and A.Kavitha, New Age International
Private Limited, 2006 First Edition.
References Books:
1. VLSI Design By Debaprasad Das, Oxford University Press,2010.
2. VLSI Design By A.Albert Raj & T. Latha, PHI Learning Private
Limited, 2010.
Electrical and Electronics Engineering
170
ELECTRICAL DISTRIBUTION SYSTEMS
(ELECTIVE?I)
Preamble:
This subject deals with the general concept of distribution system, substations
and feeders as well as discusses distribution system analysis, protection and
coordination, voltage control and power factor improvement.
Learning Objectives
? To study different factors of Distribution system.
? To study and design the substations and distribution systems.
? To study the determination of voltage drop and power loss.
? To study the distribution system protection and its coordination.
? To study the effect of compensation on p.f improvement.
? To study the effect of voltage control on distribution system.
UNIT ? I:
General Concepts
Introduction to distribution systems, Load modeling and characteristics ?
Coincidence factor ? Contribution factor loss factor ? Relationship between
the load factor and loss factor ? Classification of loads (Residential,
commercial, Agricultural and Industrial) and their characteristics.
UNIT ? II:
Substations
Location of substations: Rating of distribution substation ? Service area
within primary feeders ? Benefits derived through optimal location of
substations.
Distribution Feeders
Design Considerations of distribution feeders: Radial and loop types of
primary feeders ? Voltage levels ? Feeder loading ? Basic design practice of
the secondary distribution system.
UNIT ? III:
System Analysis
Voltage drop and power?loss calculations: Derivation for voltage drop and
power loss in lines ? Manual methods of solution for radial networks ? Three
phase balanced primary lines.
Electrical and Electronics Engineering
171
UNIT ? IV:
Protection
Objectives of distribution system protection ? Types of common faults and
procedure for fault calculations ? Protective devices: Principle of operation
of fuses ? Circuit reclosures ? Line sectionalizes and circuit breakers.
Coordination
Coordination of protective devices: General coordination procedure ?
Residual current circuit breaker RCCB (Wikipedia).
UNIT ? V:
Compensation for Power Factor Improvement
Capacitive compensation for power?factor control ? Different types of power
capacitors ? shunt and series capacitors ? Effect of shunt capacitors (Fixed
and switched) ? Power factor correction ? Capacitor allocation ? Economic
justification ? Procedure to determine the best capacitor location.
UNIT ? VI:
Voltage Control
Voltage Control: Equipment for voltage control ? Effect of series capacitors
? Effect of AVB/AVR ?Line drop compensation.
Learning Outcomes:
? Able to understand the various factors of distribution system.
? Able to design the substation and feeders.
? Able to determine the voltage drop and power loss
? Able to understand the protection and its coordination.
? Able to understand the effect of compensation on p.f improvement.
? Able to understand the effect of voltage ,current distribution system
performance.
Text Book:
1. "Electric Power Distribution system, Engineering" ? by TuranGonen,
McGraw?hill Book Company.
Reference Books:
1. Electrical Distribution Systems by Dale R.Patrick and Stephen W.Fardo,
CRC press
2. Electric Power Distribution ? by A.S. Pabla, Tata McGraw?hill
Publishing company, 4th edition, 1997.
3. Electrical Power Distribution Systems by V.Kamaraju, Right Publishers.
***
Electrical and Electronics Engineering
172
OPTIMIZATION TECHNIQUES
(Elective-I)
Preamble:
Optimization techniques have gained importance to solve many engineering
design problems by developing linear and nonlinear mathematical models.
The aim of this course is to educate the student to develop a mathematical
model by defining an objective function and constraints in terms of design
variables and then apply a particular mathematical programming technique.
This course covers classical optimization techniques, linear programming,
nonlinear programming and dynamic programming techniques.
Learning Objectives:
1. To define an objective function and constraint functions in terms of
design variables, and then state the optimization problem.
2. To state single variable and multi variable optimization problems,
without and with constraints.
3. To explain linear programming technique to an optimization problem,
define slack and surplus variables, by using Simplex method.
4. To state transportation and assignment problem as a linear
programming problem to determine optimality conditions by using
Simplex method.
5. To study and explain nonlinear programming techniques,
unconstrained or constrained, and define exterior and interior penalty
functions for optimization problems.
6. To explain Dynamic programming technique as a powerful tool for
making a sequence of interrelated decisions.
UNIT ? I:
Introduction and Classical Optimization Techniques:
Statement of an Optimization problem ? design vector ? design constraints ?
constraint surface ? objective function ? objective function surfaces ?
classification of Optimization problems.
UNIT ? II:
Classical Optimization Techniques
Single variable Optimization ? multi variable Optimization without
constraints ? necessary and sufficient conditions for minimum/maximum ?
multivariable Optimization with equality constraints. Solution by method of
Electrical and Electronics Engineering
173
Lagrange multipliers ? multivariable Optimization with inequality constraints
? Kuhn ? Tucker conditions.
UNIT ? III:
Linear Programming
Standard form of a linear programming problem ? geometry of linear
programming problems ? definitions and theorems ? solution of a system of
linear simultaneous equations ? pivotal reduction of a general system of
equations ? motivation to the simplex method ? simplex algorithm - Duality
in Linear Programming ? Dual Simplex method.
UNIT ? IV:
Transportation Problem
Finding initial basic feasible solution by north ? west corner rule, least cost
method and Vogel's approximation method ? testing for optimality of
balanced transportation problems ? Special cases in transportation problem.
UNIT ? V:
Nonlinear Programming:
Unconstrained cases - One ? dimensional minimization methods:
Classification, Fibonacci method and Quadratic interpolation method -
Univariate method, Powell's method and steepest descent method.
Constrained cases - Characteristics of a constrained problem, Classification,
Basic approach of Penalty Function method; Basic approaches of Interior and
Exterior penalty function methods. Introduction to convex Programming
Problem.
UNIT ? VI:
Dynamic Programming:
Dynamic programming multistage decision processes ? types ? concept of
sub optimization and the principle of optimality ? computational procedure in
dynamic programming ? examples illustrating the calculus method of
solution - examples illustrating the tabular method of solution.
Learning Outcomes:
The student should be able to:
1. State and formulate the optimization problem, without and with
constraints, by using design variables from an engineering design
problem.
Electrical and Electronics Engineering
174
2. Apply classical optimization techniques to minimize or maximize a
multi-variable objective function, without or with constraints, and
arrive at an optimal solution.
3. Formulate a mathematical model and apply linear programming
technique by using Simplex method. Also extend the concept of dual
Simplex method for optimal solutions.
4. Solve transportation and assignment problem by using Linear
programming Simplex method.
5. Apply gradient and non-gradient methods to nonlinear optimization
problems and use interior or exterior penalty functions for the
constraints to derive the optimal solutions.
6. Formulate and apply Dynamic programming technique to inventory
control, production planning, engineering design problems etc. to
reach a final optimal solution from the current optimal solution.
Text Books:
1. "Engineering optimization : Theory and practice"-by S. S.Rao, New
Age International (P) Limited, 3rd edition, 1998.
2. "Introductory Operations Research" by H.S. Kasene & K.D. Kumar,
Springer (India), Pvt. LTd.
Reference Books:
1. "Optimization Methods in Operations Research and systems
Analysis" ? by K.V. Mital and C. Mohan, New Age International
(P) Limited, Publishers, 3rd edition, 1996.
2. Operations Research ? by Dr. S.D.Sharma, Kedarnath, Ramnath &
Co
3. "Operations Research : An Introduction" ? by H.A.Taha,PHI pvt.
Ltd., 6th edition
4. Linear Programming?by G. Hadley.
***
Electrical and Electronics Engineering
175
T P C
IV Year ? I SEMESTER
0 3 2
MICROPROCESSORS AND
MICROCONTROLLERS LAB
Learning Objectives:
? To study programming based on 8086 microprocessor and 8051
microcontroller.
? To study 8056 microprocessor based ALP using arithmetic, logical
and shift operations.
? To study modular and Dos/Bios programming using 8086 micro
processor.
? To study to interface 8086 with I/O and other devices.
? To study parallel and serial communication using 8051 micro
controller.
Any 8 of the following experiments are to be conducted :
I. Microprocessor 8086 :
Introduction to MASM/TASM.
1. Arithmetic operation ? Multi byte addition and subtraction,
multiplication and division ? Signed and unsigned arithmetic
operation, ASCII ? Arithmetic operation.
2. Logic operations ? Shift and rotate ? Converting packed BCD to
unpacked BCD, BCD to ASCII conversion.
3. By using string operation and Instruction prefix: Move block,
Reverse string Sorting, Inserting, Deleting, Length of the string,
String comparison.
4. Modular Program: Procedure, Near and Far implementation,
Recursion.
5. Dos/BIOS programming: Reading keyboard (Buffered with and
without echo) ? Display characters, Strings.
6. Interfacing 8255?PPI
7. Programs using special instructions like swap, bit/byte, set/reset etc.
8. Programs based on short, page, absolute addressing.
9. Interfacing 8259 ? Interrupt Controller.
Electrical and Electronics Engineering
176
10. Interfacing 8279 ? Keyboard Display.
11. Stepper motor control using 8253/8255.
Any 2 of the following experiments are to be conducted:
Microcontroller 8051
12. Reading and Writing on a parallel port.
13. Timer in different modes.
14. Serial communication implementation.
15. Understanding three memory areas of 00 ? FF (Programs using
above areas).
Using external interrupts.
Learning Outcomes:
? Will be able to write assembly language program using 8086 micro
based on arithmetic, logical, and shift operations.
? Will be able to do modular and Dos/Bios programming using 8086
micro processor.
? Will be able to interface 8086 with I/O and other devices.
? Will be able to do parallel and serial communication using 8051
micro controllers.
Electrical and Electronics Engineering
177
T P C
IV Year ? I SEMESTER
0 3 2
ELECTRICAL SIMULATION LAB
Learning objectives:
? To simulate integrator circuit, differentiator circuit, Boost converter,
Buck converter, full convertor and PWM inverter.
? To simulate transmission line by incorporating line, load and
transformer models.
? To perform transient analysis of RLC circuit and single machine
connected to infinite bus(SMIB).
? To find load flow solution for a transmission network with Newton?
Rampson method.
Following experiments are to be conducted:
1. Simulation of transient response of RLC circuits
a. Response to pulse input
b. Response to step input
c. Response to sinusoidal input
2. Analysis of three phase circuit representing the generator transmission
line and load. Plot three phase currents & neutral current .
3. Simulation of single?phase full converter using RLE loads and single
phase AC voltage controller using RL loads
4. Plotting of Bode plots, root locus and nyquist plots for the transfer
functions of systems up to 5th order
5. Power system load flow using Newton?Raphson technique.
6. Simulation of Boost and Buck converters.
7. Integrator & Differentiator circuits using op?amp.
8. Simulation of D.C separately excited motor using transfer function
approach.
Any 2 of the following experiments are to be conducted:
1. Modeling of transformer and simulation of lossy transmission line.
2. Simulation of single phase inverter with PWM control.
3. Simulation of three phase full converter using MOSFET and IGBTs.
4. Transient analysis of single machine connected to infinite bus(SMIB).
Electrical and Electronics Engineering
178
Learning outcomes:
? Able to simulate integrator circuit, differentiator circuit, Boost
converter, Buck converter, full convertor and PWM inverter.
? Able to simulate transmission line by incorporating line, load and
transformer models.
? Able to perform transient analysis of RLC circuit and single
machine connected to infinite bus(SMIB).
? Able to find load flow solution for a transmission network with
Newton?Rampson method.
Reference Books:
1. "Simulation of Power Electronic Circuit",by M.B.patil,
V.Ramanarayan, V.T.Ranganathan.Narosha,2009.
2. Pspice for circuits and electronics using PSPICE ? by M.H.Rashid,
M/s PHI Publications
3. Pspice A/D user`s manual ? Microsim, USA
4. Pspice reference guide ? Microsim, USA
5. MATLAB user`s manual ? Mathworks, USA
6. MATLAB ? control system tool box ? Mathworks, USA
7. SIMULINK user`s manual ? Mathworks, USA
8. EMTP User`s Manual.
9. SEQUEL? A public domain circuit simulator available at
www.ee.iitb.ac.in/~sequel.
Electrical and Electronics Engineering
179
T P C
IV Year ? I SEMESTER
0 3 2
POWER SYSTEMS LAB
Learning Objectives:
To impart the practical knowledge of functioning of various power system
components and determination of various parameters and simulation of load
flows, transient stability, LFC and Economic dispatch.
Any 10 of the Following experiments are to be conducted:
1.
Sequence impedances of 3 phase Transformer.
2.
Sequence impedances of 3 phase Alternator by Fault Analysis.
3.
Sequence impedances of 3 phase Alternator by Direct method.
4.
ABCD parameters of Transmission network.
5.
Power Angle Characteristics of 3phase Alternator with infinite bus
bars.
6.
Dielectric strength of Transformer oil.
7.
Calibration of Tong Tester.
8&9. Load flow studies any two methods.
10.
Transient Stability Analysis
11.
Load frequency control without control
12.
Load frequency control with control
13.
Economic load dispatch without losses
14.
Economic load dispatch with losses.
Learning Outcomes:
The student is able to determine the parameters of various power system
components which are frequently occur in power system studies and he can
execute energy management systems functions at load dispatch centre.
Electrical and Electronics Engineering
180
T P C
IV Year ? II SEMESTER
3+1 0 3
DIGITAL CONTROL SYSTEMS
Preamble:
In recent years digital controllers have become popular due to their capability
of accurately performing complex computations at high speeds and versatility
in leading non linear control systems. In this context, this course focuses on
the analysis and design of digital control systems.
Learning objectives:
? To understand the concepts of digital control systems and assemble
various components associated with it. Advantages compared to the
analog type.
? The theory of z?transformations and application for the mathematical
analysis of digital control systems.
? To represent the discrete?time systems in state?space model and
evaluation of state transition matrix.
? To examine the stability of the system using different tests.
? To study the conventional method of analyzing digital control systems in
the w?plane.
? To study the design of state feedback control by "the pole placement
method."
UNIT ? I:
Introduction and signal processing
Introduction to analog and digital control systems ? Advantages of digital
systems ? Typical examples ? Signals and processing ? Sample and hold
devices ? Sampling theorem and data reconstruction ? Frequency domain
characteristics of zero order hold.
UNIT?II:
Z?transformations
Z?Transforms ? Theorems ? Finding inverse z?transforms ? Formulation of
difference equations and solving ? Block diagram representation ? Pulse
transfer functions and finding open loop and closed loop responses.
UNIT?III:
State space analysis and the concepts of Controllability and observability
State Space Representation of discrete time systems ? State transition matrix and
Electrical and Electronics Engineering
181
methods of evaluation ? Discretization of continuous ? Time state equations ?
Concepts of controllability and observability ? Tests(without proof).
UNIT ? IV:
Stability analysis
Mapping between the S?Plane and the Z?Plane ? Primary strips and
Complementary Strips ? Stability criterion ? Modified routh's stability
criterion and jury's stability test.
UNIT ? V:
Design of discrete?time control systems by conventional methods
Transient and steady state specifications ? Design using frequency response
in the w?plane for lag and led compensators ? Root locus technique in the z?
plane.
UNIT ? VI:
State feedback controllers:
Design of state feedback controller through pole placement ? Necessary and
sufficient conditions ? Ackerman's formula.
Learning outcomes:
? The students learn the advantages of discrete time control systems
and the "know how" of various associated accessories.
? The learner understand z?transformations and their role in the
mathematical analysis of different systems(like laplace transforms in
analog systems).
? The stability criterion for digital systems and methods adopted for
testing the same are explained.
? Finally, the conventional and state?space methods of design are also
introduced.
Text Book:
1. Discrete?Time Control systems ? K. Ogata, Pearson Education/PHI,
2nd Edition
Reference Books:
1. Digital Control Systems, Kuo, Oxford University Press, 2nd Edition,
2003.
2. Digital Control and State Variable Methods by M.Gopal, TMH
Electrical and Electronics Engineering
182
T P C
IV Year ? II SEMESTER
3+1 0 3
ELECTIVE ? II
ADVANCED CONTROL SYSTEMS
Preamble:
This subject aims to study state space, describing function, phase plane and
stability analysis including controllability and observability. It also deals with
modern control and optimal control systems.
Learning Objectives:
? Review of the state space representation of a control system:
Formulation of different models from the signal flow graph,
diagonalization.
? To introduce the concept of controllability and observability. Design
by pole placement technique.
? Analysis of a nonlinear system using Describing function approach
and Phase plane analysis.
? The Lypanov's method of stability analysis of a system.
? Formulation of Euler Laugrange equation for the optimization of
typical functionals and solutions.
? Formulation of linear quadratic optimal regulator (LQR) problem by
parameter adjustment and solving riccatti equation.
UNIT ? I:
State space analysis
State Space Representation ? Solution of state equation ? State transition
matrix, ?Canonical forms ? Controllable canonical form ? Observable
canonical form, Jordan Canonical Form.
UNIT ? II:
Controllability, observability and design of pole placement
Tests for controllability and observability for continuous time systems ?
Time varying case ? Minimum energy control ? Time invariant case ?
Principle of duality ? Controllability and observability form Jordan canonical
form and other canonical forms ? Effect of state feedback on controllability
and observability ? Design of state feedback control through pole placement.
Electrical and Electronics Engineering
183
UNIT ? III:
Describing function analysis
Introduction to nonlinear systems, Types of nonlinearities, describing
functions, Introduction to phase?plane analysis.
UNIT?IV:
Stability analysis
Stability in the sense of Lyapunov ? Lyapunov's stability and Lypanov's
instability theorems ? Direct method of Lypanov for the linear and nonlinear
continuous time autonomous systems.
UNIT?V:
Calculus of variations
Minimization of functional of single function ? Constrained minimization ?
Minimum principle ? Control variable inequality constraints ? Control and
state variable inequality constraints ? Euler lagrangine equation.
UNIT ?VI:
Optimal control
Linear quadratic optimal regulator (LQR) problem formulation ? Optimal
regulator design by parameter adjustment (Lyapunov method) ? Optimal
regulator design by continuous time algebraic riccatti equation (CARE) -
Optimal controller design using LQG framework.
Learning Outcomes:
? State space representation of control system and formulation of
different state models are reviewed.
? Able to design of control system using the pole placement technique
is given after introducing the concept of controllability and
observability.
? Able to analyse of nonlinear system using the describing function
technique and phase plane analysis.
? Able to analyse the stability analysis using lypnov method.
? Minimization of functionals using calculus of variation studied.
? Able to formulate andsolve the LQR problem and riccatti equation.
Text Books:
? Modern Control Engineering ? by K. Ogata, Prentice Hall of India,
3rd edition, 1998
? Automatic Control Systems by B.C. Kuo, Prentice Hall Publication
Electrical and Electronics Engineering
184
Reference Books:
1. Modern Control System Theory ? by M. Gopal, New Age
International Publishers, 2nd edition,1996
2. Control Systems Engineering by I.J. Nagarath and M.Gopal, New
Age International (P) Ltd.
3. Digital Control and State Variable Methods ? by M. Gopal, Tata Mc
Graw? Hill Companies, 1997.
4. Systems and Control by Stainslaw H. Zak , Oxford Press, 2003.
5. Optimal control theory: an Introduction by Donald E.Kirk by Dover
publications.
***
Electrical and Electronics Engineering
185
HIGH VOLTAGE ENGINEERING
(ELECTIVE ? II)
Preamble:
With the growth of power, HV power transmission has become an important
subject. The performance of generating equipment requires knowledge of
different phenomena occurring at higher voltage. Thus evaluations of various
insulating materials are required for protection of HV equipments. Keeping
this in view the course is designed to understand various phenomena related
to breakdown study and withstand characteristics of insulating materials. The
course also describes the generation and measurement of DC, AC and
Impulse voltages as well various testing techniques.
Learning Objectives:
? To understand electric field distribution and computation in different
configuration of electrode systems.
? To understand HV breakdown phenomena in gases, liquids and
solids dielectric materials.
? To acquaint with the generating principle of operation and design of
HVDC, AC and Impulse voltages and impulse currents.
? To understand various techniques of AC, DC and Impulse
measurement of high voltages and currents.
? To understand the insulating characteristics of dielectric materials.
? To understand the various testing techniques of HV equipments.
UNIT?I:
Introduction to High Voltage Technology
Electric Field Stresses ? Uniform and non?uniform field configuration of
electrodes ? Estimation and control of electric Stress ? Numerical methods
for electric field computation.
UNIT?II:
Break down phenomenon in gaseous, liquid and solid insulation
Gases as insulating media ? Collision process ? Ionization process ?
Townsend's criteria of breakdown in gases ? Paschen's law ? Liquid as
Insulator ? Pure and commercial liquids ? Breakdown in pure and
commercial liquid ? Intrinsic breakdown ? Electromechanical breakdown ?
Thermal breakdown ?Breakdown of solid dielectrics in practice ? Breakdown
in composite dielectrics used in practice.
Electrical and Electronics Engineering
186
UNIT?III:
Generation of High voltages and High currents
Generation of high DC voltages ? Generation of high alternating voltages ?
Generation of impulse voltages ? Generation of impulse currents ? Tripping
and control of impulse generators.
UNIT?IV:
Measurement of high voltages and High currents
Measurement of high AC, DC and Impulse voltages ? Voltages and
measurement of high currents ? Direct, alternating and Impulse.
UNIT?V:
Non?destructive testing of material and electrical apparatus
Measurement of DC resistivity ? Measurement of dielectric constant and loss
factor ? Partial discharge measurements.
UNIT?VI:
High voltage testing of electrical apparatus
Testing of insulators and bushings ? Testing of isolators and circuit breakers
? Testing of cables ? Testing of transformers ? Testing of surge arresters ?
Radio interference measurements.
Learning Outcomes:
? To be acquainted with the performance of high voltages with regard
to different configurations of electrode systems.
? To be able to understand theory of breakdown and withstand
phenomena of all types of dielectric materials.
? To acquaint with the techniques of generation of AC,DC and
Impulse voltages.
? To be able to apply knowledge for measurement of high voltage and
high current AC,DC and Impulse.
? To be in a position to measure dielectric property of material used
for HV equipment.
? To know the techniques of testing various equipment's used in HV
engineering.
Text Books:
1. High Voltage Engineering by M.S.Naidu and V. Kamaraju ? TMH
Publications, 3rd Edition.
Electrical and Electronics Engineering
187
2. High Voltage Engineering : Fundamentals by E.Kuffel, W.S. Zaengl,
J. Kuffel by Elsevier, 2nd Edition.
3. High Voltage Engineering and Technology by Ryan, IET Publishers.
Reference Books:
1. High Voltage Engineering by C.L.Wadhwa, New Age Internationals
(P) Limited, 1997.
2. High Voltage Insulation Engineering by Ravindra Arora, Wolfgang
Mosch, New.
Age International (P) Limited, 1995.
Electrical and Electronics Engineering
188
SPECIAL ELECTRICAL MACHINES
(Elective ? II)
Preamble:
This is an advanced course on electrical machines. Students will be exposed
to various special machines which are gaining importance in industry. This
course covers topics related to principles, performance and applications of
these special machines including switched reluctance motors, stepper motors,
permanent magnet dc motors, linear motors and electric motors for traction
drives.
Learning Objective:
? To explain theory of operation and control of switched reluctance
motor.
? To explain the performance and control of stepper motors, and their
applications.
? To describe the operation and characteristics of permanent magnet
dc motor.
? To distinguish between brush dc motor and brush less dc motor.
? To explain the theory of travelling magnetic field and applications
of linear motors.
? To understand the significance of electrical motors for traction
drives.
Unit I:
Switched Reluctance Motor
Principle of operation ? Design of stator and rotor pole arc ? Power converter
for switched reluctance motor ? Control of switched reluctance motor.
Unit II:
Stepper Motors
Construction ? Principle of operation ? Theory of torque production ? Hybrid
stepping motor ? Variable reluctance stepping motor ? Open loop and closed
loop control.
Unit III:
Permanent Magnet DC Motors
Construction ? Principle of working ? Torque equation and equivalent
circuits ? Performance characteristics ? Moving coil motors.
Electrical and Electronics Engineering
189
Unit IV:
Permanent Magnet Brushless DC Motor
Construction ? Principle of operation ? Theory of brushless DC motor as
variable speed synchronous motor ? Sensor less and sensor based control of
BLDC motors.
Unit V:
Linear motors
Linear induction motor: Construction? principle of operation? applications.
Linear synchronous motor: Construction ? principle of operation?
applications.
Unit VI:
Electric Motors for traction drives
AC motors? DC motors ?Single sided linear induction motor for traction
drives ? Comparison of AC and DC traction.
Learning Outcomes:
The student should be able to
? Explain theory of operation and control of switched reluctance
motor.
? Explain the performance and control of stepper motors, and their
applications.
? Describe the operation and characteristics of permanent magnet dc
motor.
? Distinguish between brush dc motor and brush less dc motor.
? Explain the theory of travelling magnetic field and applications of
linear motors.
? Understand the significance of electrical motors for traction drives.
Text Books:
1. Special electrical Machines, K.Venkata Ratnam, University press,
2009, New Delhi.
2. Brushless Permanent magnet and reluctance motor drives, Clarenden
press, T.J.E. Miller, 1989, Oxford.
3. Special electrical machines, E.G.Janardhanan, PHI learning private
limited, 2014.
Electrical and Electronics Engineering
190
T P C
IV Year ? II SEMESTER
3+1 0 3
ELECTIVE ? III
ELECTRIC POWER QUALITY
Preamble:
Power quality is a major problem for utilities and customers. Customers
using sensitive critical loads need quality power for proper operation of the
electrical equipment. It is important for the student to learn the power quality
issues and improvement measures provided by the utility companies. This
course covers the topics on voltage and current imperfections, harmonics,
voltage regulation, power factor improvement, distributed generation, power
quality monitoring and measurement equipment.
Learning Objectives:
? To learn different types of power quality phenomena.
? To identify sources for voltage sag, voltage swell, interruptions,
transients, long duration over voltages and harmonics in a power
system.
? To describe power quality terms and study power quality standards.
? To learn the principle of voltage regulation and power factor
improvement methods.
? To explain the relationship between distributed generation and power
quality.
? To understand the power quality monitoring concepts and the usage of
measuring instruments.
Unit?I:
Introduction
Overview of power quality ? Concern about the power quality ? General
classes of power quality and voltage quality problems ? Transients ? Long?
duration voltage variations ? Short?duration voltage variations ? Voltage
unbalance ? Waveform distortion ? Voltage fluctuation ? Power frequency
variations.
Unit?II:
Voltage imperfections in power systems
Power quality terms ? Voltage sags ? Voltage swells and interruptions ?
Electrical and Electronics Engineering
191
Sources of voltage sag, swell and interruptions ? Nonlinear loads ? IEEE and
IEC standards. Source of transient over voltages ? Principles of over voltage
protection ? Devices for over voltage protection ? Utility capacitor switching
transients.
Unit?III
Voltage Regulation and power factor improvement:
Principles of regulating the voltage ? Device for voltage regulation ? Utility
voltage regulator application ? Capacitor for voltage regulation ? End?user
capacitor application ? Regulating utility voltage with distributed resources ?
Flicker ? Power factor penalty ? Static VAR compensations for power factor
improvement.
Unit? IV
Harmonic distortion and solutions
Voltage distortion vs. Current distortion ? Harmonics vs. Transients ?
Harmonic indices ? Sources of harmonics ? Effect of harmonic distortion ?
Impact of capacitors, transformers, motors and meters ? Point of common
coupling ? Passive and active filtering ? Numerical problems.
Unit?V
Distributed Generation and Power Quality
Resurgence of distributed generation ? DG technologies ? Interface to the
utility system ? Power quality issues and operating conflicts ? DG on low
voltage distribution networks.
Unit?VI
Monitoring and Instrumentation
Power quality monitoring and considerations ? Historical perspective of PQ
measuring instruments ? PQ measurement equipment ? Assessment of PQ
measuring data ? Application of intelligent systems ? PQ monitoring
standards.
Learning Outcomes:
At the end of this course the student should be able to
? Differentiate between different types of power quality problems.
? Explain the sources of voltage sag, voltage swell, interruptions,
transients, long duration over voltages and harmonics in a power
system.
? Analyze power quality terms and power quality standards.
Electrical and Electronics Engineering
192
? Explain the principle of voltage regulation and power factor
improvement methods.
? Demonstrate the relationship between distributed generation and
power quality.
? Explain the power quality monitoring concepts and the usage of
measuring instruments.
Textbooks:
1. Electrical Power Systems Quality, Dugan R C, McGranaghan M F,
Santoso S, and Beaty H W, Second Edition, McGraw?Hill, 2012, 3rd
edition.
2. Electric power quality problems ?M.H.J.Bollen IEEE series-Wiley
india publications,2011.
3. Power Quality Primer, Kennedy B W, First Edition, McGraw?Hill,
2000.
Reference Books:
1. Understanding Power Quality Problems: Voltage Sags and
Interruptions, Bollen M HJ, First Edition, IEEE Press; 2000.
2. Power System Harmonics, Arrillaga J and Watson N R, Second
Edition, John Wiley & Sons, 2003.
3. Electric Power Quality control Techniques, W. E. Kazibwe and M. H.
Sendaula, Van Nostrad Reinhold, New York.
4. Power Quality c.shankaran, CRC Press, 2001
5. Harmonics and Power Systems ?Franciso C.DE LA Rosa?CRC Press
(Taylor & Francis)
6. Power Quality in Power systems and Electrical Machines?EwaldF.
fuchs, Mohammad A.S. Masoum?Elsevier.
Electrical and Electronics Engineering
193
DIGITAL SIGNAL PROCESSING
(Elective ? III)
Preamble:
Signals analysis is very important in daily life. Hence it is required to study
the different signals (continuous and discrete) and their properties. The
behavior of the signals in time and frequency domain are important in
analyzing the response of the network. The tools like FFT, DFT, Z?
transforms may be used in the analysis of the signals. Filters must be required
to eliminate the unwanted signals. Hence digital filter design also required to
be studied. Sampling of signals are required to convert continuous to discrete
signals. To have knowledge on the implementation signals, DSP processors
must be studied.
Learning Objectives:
? To study different types of signals and properties of systems.
? To study the application of Fourier transform to discrete time
systems
? To study the FFT and inverse FFT and its applications to discrete
sequences.
? To study the realization of digital filters and their design
? To study the multi?rate signal processing.
? To study the architecture of digital signal processors.
UNIT?I:
Introduction
Introduction to Digital Signal Processing: Discrete time signals & sequences
? Linear shift invariant systems ? Stability and causality ? Linear constant
coefficient difference equations.
UNIT?II:
Discrete Fourier Series
Properties of discrete Fourier series, DFS representation of periodic
sequences, Discrete Fourier transforms: Properties of DFT, linear
convolution of sequences using DFT, Computation of DFT. Relation between
Z?transform and DFS
UNIT?III:
Fast Fourier Transforms
Frequency domain representation of discrete time signals and systems ? Fast
Electrical and Electronics Engineering
194
Fourier transforms (FFT) ? Radix?2 decimation in time and decimation in
frequency FFT Algorithms ? Inverse FFT ? and FFT for composite N
UNIT?IV:
Realization of Digital Filters
Solution of difference equations of digital filters ? Block diagram
representation of linear constant ? Coefficient difference equations ? Basic
structures of IIR systems ? Transposed forms ? Basic structures of FIR
systems ? System function.
IIR Digital Filters
Analog filter approximations ? Butter worth and Chebyshev ? Design of IIR
Digital filters from analog filters ? Design Examples: Analog?Digital
transformations.
FIR Digital Filters
Characteristics of FIR Digital Filters ? Frequency response ? Design of FIR
Digital Filters using Window Techniques ? Frequency Sampling technique ?
Comparison of IIR & FIR filters.
UNIT?V:
Multirate Digital Signal Processing:
Decimation ? Interpolation ? Down sampling ? Up sampling rate ?
Conversion ? Implementation of sampling rate conversion.
UNIT?VI:
Introduction to Digital Signal Processors(DSP):
Introduction to programmable DSPs: Multiplier and Multiplier Accumulator
(MAC) ? Modified bus structures and memory access schemes in DSPs ?
Multiple access memory ? Multiport memory ? VLSI architecture ?
Pipelining ? Special addressing modes ? On?chip peripherals ? Architecture
of TMS 320C5X ? Introduction ? Bus structure ? Central arithmetic logic
unit ? Auxiliary registrar ? Index registrar ? Auxiliary register compare
register ? Block move address register ? Parallel logic unit ? Memory
mapped registers ? Program controller ? Some flags in the status registers ?
On?chip registers, On?chip peripherals.
Learning outcomes:
? Able to study different types of signals and properties of systems.
? Able to apply of Fourier transform to discrete time systems
? Able to apply the FFT and inverse FFT to discrete sequences.
Electrical and Electronics Engineering
195
? Able to realize and design digital filters
? Able to understand the multi?rate signal processing.
? Able to understand architecture of digital signal processors.
Text Books:
1. Digital Signal Processing ? Alan V. Oppenheim, Ronald W.
Schafer, PHI Ed., 2006
2. Digital Signal Processing, Principles, Algorithms, and Applications:
John G. Proakis, Dimitris G. Manolakis, Pearson Education / PHI,
2007
Reference Books:
1. Digital Signal Processing: Andreas Antoniou, TATA McGraw Hill ,
2006
2. Digital Signal Processing: MH Hayes, Schaum's Outlines, TATA
Mc?Graw Hill, 2007.
3. DSP Primer ? C. Britton Rorabaugh, Tata Mc Graw Hill, 2005.
4. Fundamentals of Digital Signal Processing using Matlab ? Robert J.
Schilling, Sandra L. Harris, Thomson, 2007.
5. Digital Signal Processors ? Architecture, Programming and
Applications, B.Venkataramani, M.Bhaskar, TATA McGraw Hill,
2002.
Electrical and Electronics Engineering
196
FLEXIBLE ALTERNATING CURRENT TRANSMISSION SYSTEMS
(FACTS)
(Elective ? III)
Preamble:
Flexible Alternating Current Transmission System controllers have become a
part of modern power system. It is important for the student to understand the
principle of operation of series and shunt compensators by using power
electronics. As the heart of many power electronic controllers is a voltage
source converter (VSC), the student should be acquainted with the operation
and control of VSC. Two modern power electronic controllers are also
introduced.
Learning Objectives:
? To learn the basics of power flow control in transmission lines by
using FACTS controllers
? To explain the operation and control of voltage source converter.
? To discuss compensation methods to improve stability and reduce
power oscillations in the transmission lines.
? To learn the method of shunt compensation by using static VAR
compensators.
? To learn the methods of compensation by using series compensators
? To explain the operation of two modern power electronic controllers
(Unified Power Quality Conditioner and Interline Power Flow
Controller).
Unit?I:
Introduction to FACTS
Power flow in an AC System ? Loading capability limits ? Dynamic stability
considerations ? Importance of controllable parameters ? Basic types of
FACTS controllers ? Benefits from FACTS controllers ? Requirements and
characteristics of high power devices ? Voltage and current rating ? Losses
and speed of switching ? Parameter trade?off devices.
Unit?II:
Voltage source and Current source converters
Concept of voltage source converter(VSC) ? Single phase bridge converter ?
Square?wave voltage harmonics for a single?phase bridge converter ?
Three?phase full wave bridge converte r? Three?phase current source
Electrical and Electronics Engineering
197
converter ? Comparison of current source converter with voltage source
converter.
Unit?III:
Shunt Compensators?1
Objectives of shunt compensation ? Mid?point voltage regulation for line
segmentation ? End of line voltage support to prevent voltage instability ?
Improvement of transient stability ? Power oscillation damping.
Methods of controllable VAR generation
Variable impedance type static VAR generators ? Thyristor Controlled
Reactor (TCR) and Thyristor Switched Reactor(TSR).
Unit?IV:
Shunt Compensators?2
Thyristor Switched Capacitor(TSC)? Thyristor Switched Capacitor ?
Thyristor Switched Reactor (TSC?TCR). Static VAR compensator(SVC) and
Static Compensator(STATCOM): The regulation and slope transfer function
and dynamic performance ? Transient stability enhancement and power
oscillation damping? Operating point control and summary of compensation
control.
Unit V:
Series Compensators
Static series compensators: Concept of series capacitive compensation ?
Improvement of transient stability ? Power oscillation damping ? Functional
requirements. GTO thyristor controlled Series Capacitor (GSC) ? Thyristor
Switched Series Capacitor (TSSC) and Thyristor Controlled Series Capacitor
(TCSC).
Unit?VI:
Combined Controllers
Schematic and basic operating principles of unified power flow
controller(UPFC) and Interline power flow controller(IPFC) ? Application of
these controllers on transmission lines.
Learning Outcomes:
The student should be able to
? Determine power flow control in transmission lines by using
FACTS controllers.
? Explain operation and control of voltage source converter.
Electrical and Electronics Engineering
198
? Discuss compensation methods to improve stability and reduce
power oscillations in the transmission lines.
? Explain the method of shunt compensation by using static VAR
compensators.
? Appreciate the methods of compensations by using series
compensators.
? Explain the operation of modern power electronic controllers
(Unified Power Quality Conditioner and Interline Power Flow
Controller).
Text Books:
1. "Understanding FACTS" N.G.Hingorani and L.Guygi, IEEE
Press.Indian Edition is available:??Standard Publications, 2001.
2. "Flexible ac transmission system (FACTS)" Edited by Yong Hue
Song and Allan T Johns, Institution of Electrical Engineers, London.
3. Thyristor-based FACTS Controllers for Electrical Transmission
Systems, by R.Mohan Mathur and Rajiv k.Varma, Wiley
Electrical and Electronics Engineering
199
T P C
IV Year ? II SEMESTER
3+1 0 3
ELECTIVE ? IV
OOPS THROUGH JAVA
Preamble:
This course teaches students how to develop Java applications. Topics
covered include the Java programming language syntax, OO programming
using Java, exception handling, file input/output, threads, collection classes,
and networking.
Learning Objectives:
? Focus on object oriented concepts and java program structure and its
installation.
? Comprehension of java programming constructs, control structures
in Java.
? Implementing Object oriented constructs such as various class
hierarchies, interfaces and exception handling.
? Understanding of Thread concepts and I/O in Java.
? Being able to build dynamic user interfaces using applets and Event
handling in java.
? Understanding of various components of Java AWT and Swing and
writing code snippets using them.
UNIT I:
Introduction to OOP
Introduction, Need of Object Oriented Programming, Principles of Object
Oriented Languages, Procedural languages Vs OOP, Applications of OOP,
History of JAVA, Java Virtual Machine, Java Features, Program structures,
Installation of JDK1.6
UNIT II:
Programming Constructs
Variables , Primitive Datatypes, Identifiers- Naming Coventions, Keywords,
Literals, Operators-Binary,Unary and ternary, Expressions, Precedence rules
Electrical and Electronics Engineering
200
and Associativity, Primitive TypeConversion and Casting, Flow of control-
Branching,Conditional, loops.,
Classes and Objects- classes, Objects, Creating Objects, Methods,
constructors-Constructor overloading, cleaning up unused objects-Garbage
collector, Class variable and Methods-Static keyword, this keyword, Arrays,
Command line arguments
UNIT III:
Inheritance: Types of Inheritance, Deriving classes using extends keyword,
Method overloading, super keyword, final keyword, Abstract class
Interfaces, Packages and Enumeration: Interface-Extending interface,
Interface Vs Abstract classes, Packages-Creating packages , using Packages,
Access protection, java.lang package
Exceptions & Assertions - Introduction, Exception handling techniques-
try...catch, throw, throws, finally block, user defined exception, Exception
Encapsulation and Enrichment, Assertions
UNIT IV:
MultiThreading : java.lang.Thread, The main Thread, Creation of new
threads, Thread priority, Multithreading- Using isAlive() and join(),
Syncronization, suspending and Resuming threads, Communication between
Threads
Input/Output: reading and writing data, java.io package
UNIT V:
Applets- Applet class, Applet structure, An Example Applet Program, Applet
Life Cycle, paint(),update() and repaint()
Event Handling -Introduction, Event Delegation Model, java.awt.event
Description, Sources of Events, Event Listeners, Adapter classes, Inner
classes
UNIT VI:
Abstract Window Toolkit
Why AWT?, java.awt package, Components and Containers, Button, Label,
Checkbox, Radio buttons, List boxes, Choice boxes, Text field and Text area,
container classes, Layouts, Menu, Scroll bar
Swing:
Introduction, JFrame, JApplet, JPanel, Components in swings, Layout
Managers, JList and JScroll Pane,Split Pane, JTabbedPane, Dialog Box
Pluggable Look and Feel.
Electrical and Electronics Engineering
201
Learning Outcomes:
? Understand the format and use of objects.
? Understand basic input/output methods and their use.
? Understand object inheritance and its use.
? Understand development of JAVA applets vs. JAVA applications.
? Understand the use of various system libraries.
Text Books:
1.
The Complete Refernce Java, 8ed, Herbert Schildt, TMH
2. Programming in JAVA, Sachin Malhotra, Saurabh choudhary,
Oxford.
3.
JAVA for Beginners, 4e, Joyce Farrell, Ankit R. Bhavsar, Cengage
Learning.
4. Object oriented programming with JAVA, Essentials and
Applications, Raj Kumar Bhuyya, Selvi, Chu TMH
5.
Introduction to Java rogramming, 7th ed, Y Daniel Liang, Pearson
Reference Books:
1.
JAVA Programming, K.Rajkumar.Pearson
2.
Core JAVA, Black Book, Nageswara Rao, Wiley, Dream Tech
3.
Core JAVA for Beginners, Rashmi Kanta Das, Vikas.
4.
Object Oriented Programming through JAVA , P Radha Krishna ,
University Press.
Electrical and Electronics Engineering
202
UNIX AND SHELL PROGRAMMING
(Elective ? IV)
Learning Objectives:
? to provide a comprehensive introduction to Shell Programming.
? have the fundamental skills required to write simple and complex
Shell scripts to automate jobs and processes in the Unix
environment
Unit I:
Introduction to Unix:- Architecture of Unix, Features of Unix , Unix
Commands ? PATH, man, echo, printf, script, passwd, uname, who, date,
stty, pwd, cd, mkdir, rmdir, ls, cp, mv, rm, cat, more, wc, lp, od, tar,gzip.
Unit II :
Unix Utilities:- Introduction to unix file system, vi editor, file handling
utilities, security by file permissions, process utilities, disk utilities,
networking commands, unlink, du, df, mount, umount, find, unmask, ulimit,
ps, w, finger, arp, ftp, telnet, rlogin.Text processing utilities and backup
utilities, detailed commands to be covered are tail, head, sort, nl, uniq, grep,
egrep, fgrep, cut, paste, join, tee, pg, comm, cmp, diff, tr, awk, cpio
Unit III :
File Management : File Structures, System Calls for File Management ?
create, open, close, read, write, lseek, link, symlink, unlink, stat, fstat, lstat,
chmod, chown, Directory API ? opendir, readdir, closedir, mkdir, rmdir,
umask.
Introduction to Shells : Unix Session, Standard Streams, Redirection, Pipes,
Tee Command, Command Execution, Command- Line Editing, Quotes,
Command Substitution, Job Control, Aliases, Variables, Predefined
Variables, Options, Shell/Environment Customization.
Filters : Filters and Pipes, Concatenating files, Display Beginning and End
of files, Cut and Paste, Sorting, Translating Characters, Files with Duplicate
Lines, Count characters, Words or Lines, Comparing Files.
Unit IV :
Grep : Operation, grep Family, Searching for File Content.
Sed : Scripts, Operation, Addresses, commands, Applications, grep and sed.
awk: Execution, Fields and Records, Scripts, Operations, Patterns, Actions,
Associative Arrays, String
Electrical and Electronics Engineering
203
Functions, String Functions, Mathematical Functions, User ? Defined
Functions, Using System commands, in awk, Applications, awk and grep, sed
and awk.
Unit V :
Interactive Korn Shell : Korn Shell Features, Two Special Files, Variables,
Output, Input, Exit Status of a Command, eval Command, Environmental
Variables, Options, Startup Scripts, Command History, Command Execution
Process.
Korn Shell Programming : Basic Script concepts, Expressions, Decisions:
Making Selections, Repetition, special Parameters and Variables, changing
Positional Parameters, Argument Validation, Debugging Scripts, Script
Examples.
Unit VI :
Interactive C Shell : C shell features, Two Special Files, Variables, Output,
Input, Exit Status of a Command, eval Command, Environmental Variables,
On-Off Variables, Startup and Shutdown Scripts, Command History,
Command Execution Scripts.
C Shell Programming : Basic Script concepts, Expressions, Decisions:
Making Selections, Repetition, special Parameters and Variables, changing
Positional Parameters, Argument Validation, Debugging Scripts, Script
Examples.
Learning Outcomes:
Upon completing this course students will have skills in:
1. Use UNIX shells and commands to create powerful data processing
applications.
2. Build UNIX applications using the shell command interpreter and
UNIX commands.
3. Use UNIX at the command line to manage data, files, and programs.
4. Use UNIX editors and tools to create and modify data files and
documents.
Text Books :
1. Unix and shell Programming Behrouz A. Forouzan, Richard F.
Gilberg. Thomson
2. Your Unix the ultimate guide, Sumitabha Das, TMH. 2nd Edition.
2007-2008 Page 34 of 95
Electrical and Electronics Engineering
204
References Books:
1. Unix for programmers and users, 3rd edition, Graham Glass, King
Ables, Pearson Education.
2. Unix programming environment, Kernighan and Pike, PHI. / Pearson
Education
3. The Complete Reference Unix, Rosen, Host, Klee, Farber, Rosinski,
Second Edition, TMH.
Electrical and Electronics Engineering
205
AI TECHNIQUES
(Elective IV)
Preamble:
The aim of this course is to study the AI techniques such as neural networks
and fuzzy systems. The course focuses on the application of AI techniques to
electrical engineering.
Learning Objectives:
? To study various methods of AI
? To study the models and architecture of artificial neural networks.
? To study the ANN paradigms.
? To study the fuzzy sets and operations.
? To study the fuzzy logic systems.
? To study the applications of AI.
Unit?I:
Introduction to AI techniques
Introduction to artificial intelligence systems? Humans and Computers ?
Knowledge representation ? Learning process ? Learning tasks ? Methods of
AI techniques.
Unit?II:
Neural Networks
Organization of the Brain ? Biological Neuron ? Biological and Artificial
neuron Models, MC Culloch-pitts neuron model, Activation functions,
Learning rules, neural network architectures- Single-layer feed-forward
networks: ? Perceptron, Learning algorithm for perceptron- limitations of
Perceptron model
Unit?III:
ANN paradigm
Multi-layer feed-forward network (based on Back propagation algorithm)?
Radial-basisn function networks- Recurrent networks (Hopfield networks).
Unit ? IV:
Classical and Fuzzy Sets
Introduction to classical sets ? properties ? Operations and relations ? Fuzzy
sets ? Membership ? Uncertainty ? Operations ? Properties ? Fuzzy
relations ? Cardinalities ? Membership functions.
Electrical and Electronics Engineering
206
Unit?V:
Fuzzy Logic System Components
Fuzzification ? Membership value assignmen ? Development of rule base
and decision making system ? Defuzzification to crisp sets ? Defuzzification
methods ? Basic hybrid system.
Unit?VI:
Application of AI techniques
Load forecasting ? Load flow studies ? Economic load dispatch ? Load
frequency control ? Reactive power control ? Speed control of dc and ac
motors.
Text Books:
1. Neural Networks, Fuzzy logic, Genetic algorithms: synthesis and
applications by S.Rajasekaran and G.A. Vijayalakshmi Pai ? PHI
Publication.
2. Fuzzy logic with fuzzy applications- by T.J.Ross, TMH.
Reference Books:
1. Introduction to Artificial Neural Systems ? Jacek M. Zurada, Jaico
Publishing House, 1997.
2. Fundamentals of Neural Networks Architectures, Algorithms and
Applications - by laurene Fausett, Pearson.
3. Neural Networks, Algorithms, Applications and programming
Techniques by James A. Freeman, David M. Skapura.
4. Introduction to Neural Networks using MATLAB 6.0 by S N
Sivanandam, S Sumathi, S N Deepa TMGH
***
Electrical and Electronics Engineering
207
POWER SYSTEM REFORMS
(Elective IV)
Preamble:
This course introduces the concepts and issues of power system reforms and
aims at computation of Available Transfer Capability (ATC), Congestion
Management, Electricity Pricing, Ancillary services Management and Power
system operation in competitive environment
Learning Objectives:
? To study fundamentals of power system deregulation and
restructuring.
? To study available transfer capability.
? To study congestion management
? To study various electricity pricing.
? To study operation of power system in deregulated environment.
? To study importance of Ancillary services management.
UNIT?I
Over view of key issues in electric utilities
Introduction ? Restructuring models ? Independent system operator (ISO) ?
Power Exchange ? Market operations ? Market Power ? Standard cost ?
Transmission Pricing ? Congestion Pricing ? Management of Inter
zonal/Intra zonal Congestion.
UNIT?II
OASIS: Open Access Same?Time Information System
Structure of OASIS ? Processing of Information ? Transfer capability on
OASIS ? Definitions Transfer Capability Issues ? ATC ? TTC ? TRM ?
CBM calculations ? Methodologies to calculate ATC.
UNIT?III
Congestion Management
Introduction to congestion management ? Methods to relieve congestion
UNIT?IV
Electricity Pricing:
Introduction ? Electricity price volatility electricity price indexes ?
Electrical and Electronics Engineering
208
Challenges to electricity pricing ? Construction of forward price curves ?
Short?time price forecasting.
UNIT?V
Power system operation in competitive environment:
Introduction ? Operational planning activities of ISO ? The ISO in pool
markets ? The ISO in bilateral markets ? Operational planning activities of a
Genco.
UNIT?VI
Ancillary Services Management:
Introduction ? Reactive power as an ancillary service ? A review ?
Synchronous generators as ancillary service providers.
Learning Outcomes:
? Will understand importance of power system deregulation and
restructuring.
? Able to compute ATC.
? Will understand transmission congestion management.
? Able to compute electricity pricing in deregulated environment.
? Will be able to understand power system operation in deregulated
environment.
? Will understand importance of ancillary services.
Text Books:
1. Kankar Bhattacharya, Math H.J. Boller, Jaap E.Daalder, `Operation
of Restructured Power System' Klum,er Academic Publisher ? 2001
2. Mohammad Shahidehpour, and Muwaffaq alomoush, ?
"Restructured electrical Power systems" Marcel Dekker, Inc. 2001
3. Loi Lei Lai; "Power system Restructuring and Deregulation", Jhon
Wiley & Sons Ltd., England.
4. Electrical Power Distribution Case studies from Distribution reform,
upgrades and Management (DRUM) Program, by USAID/India,
TMH
Electrical and Electronics Engineering
209
SYSTEMS ENGINEERING
(Elective IV)
Preamble:
This course is intended to introduce the student to the systems engineering
process used to create multidisciplinary solutions to complex problems which
have multiple, often conflicting objectives. The course will provide an
overview of systems engineering in the context of large developmental
programs. By focusing on the objectives, principles and practices of systems
engineering, the course will enable the student to better understand the
functions, capabilities and limitations of systems engineering.
Learning Objectives:
? To understand the foundations of systems Engineering
? To understand the process of engineering systems systematically
? To understand how to deploy (put to use) the systems engineered.
? To understand the supporting systems during systems life cycle
? To understand the application of systems engineering in product and
service space.
? To understand systems engineering in perspective of related
disciplines project management and software engineering.
UNIT?I:
Introduction to Systems: Systems Fundamentals ? Systems Science ?
Systems Thinking ? Modeling Systems.
UNIT ?II:
Systems Engineering and Management: System life cycle models ? System
vision and mission ? Stakeholder needs and requirements ? System
requirements ? Logical architecture design ? Physical architecture design ?
System analysis ? System realization ? System implementation ? System
integration ? System verification ? System validation.
UNIT ? III:
System deployment and use ? System deployment ? Operation of the system
? System maintenance ? Logistics.
UNIT ? IV:
Systems engineering management ? Planning ? Assessment and Control ?
Electrical and Electronics Engineering
210
Risk Management ? Measurement ? Decision Management ? Configuration
Management ? Information Management ? Quality Management.
UNIT ? V:
Applications of systems engineering ? Product systems engineering ?
Services Systems engineering ? Enterprise systems engineering
UNIT ? VI:
Enabling systems engineering ? People: Enabling teams and individuals ?
Software engineering, Project management ? Case studies.
Learning Outcomes:
? To be able to appreciate and evaluate systems in general and apply
to specific systems.
? Should engineer successful systems fit for intended purpose. Right
from concept to development.
? Should be able to successfully deploy the new systems developed.
? Should be able to leverage the support systems for success of
systems from womb to tomb.
? Should be able to apply systems engineering in engineering product
and services.
? Should be able to relate systems engineering with project
management and software engineering.
Text books:
1. SEBOK Guide to the Systems Engineering Body of Knowledge
(SEBoK), version 1.2 ? INCOSEwww.sebowiki.org/wiki/incose
systems engineering Hand Book.
Reference Books:
1. Systems engineering principles and practice second edition John
wiley Alexander Kossiakoff etal.
2. Systems engineering with Economics ,Probability and Statistics
Khisty c.jotin.2nd edition, 2nd edition J Ross publications
***
IV Year ? II
T P C
SEMESTER
0 0 9
Project
***
This post was last modified on 16 March 2021