OR
(b) Draw an ellipse by 'Arcs of Circle' method. The major and minor axes are 120 mm and 80 mm respectively.
Question 2
(a) A point A is 20 mm above HP and 30 mm in front of VP. Another point B is 40 mm below HP and 50 mm behind VP. The distance between the projectors parallel to XY is 80 mm. Draw the projections of the line joining A and B. Find the length and true inclinations of the line with HP and VP.
--- Content provided by FirstRanker.com ---
OR
(b) A line AB, 70 mm long, has its end A 15 mm above HP and 20 mm in front of VP. The top view and front view of the line are 60 mm and 40 mm respectively. Draw its projections and determine its inclinations with HP and VP.
Question 3
(a) A square lamina of side 40 mm rests on one of its sides on HP. The lamina makes 30° to HP and the side on which it rests makes 45° to VP. Draw its projections.
OR
(b) Draw the projections of a cone, base 75 mm diameter and axis 100 mm long, lying on the HP on one of its generators with the axis parallel to the VP.
--- Content provided by FirstRanker.com ---
Question 4
(a) Draw the isometric view of a square prism of base 40 mm side and axis 65 mm long, when its axis is vertical and one side of base is parallel to VP.
OR
(b) Draw the isometric view of a hexagonal pyramid of base 30 mm side and height 65 mm resting on its base on the HP with an edge of the base parallel to the VP.
Question 5
Draw the following views of the object shown in figure. All dimensions are in mm.
- Front View
- Top View
- Side View from Left
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---