(OR)
Construct a vernier scale of RF = 1:2.5 to read centimeters up to 4 meters. Show on it a length of 3 meters 69 centimetres.
A line AB is 75 mm long. A is 50 mm in front of VP and 15 mm above HP. B is 15 mm in front of VP and is above HP. Top view of AB is 50 mm long. Draw and measure the front view. Find the inclinations of the line with HP and VP.
(OR)
--- Content provided by FirstRanker.com ---
A line AB, 90 mm long, is inclined at 45° to the HP and 30° to the VP. Its end A is in the HP and 20 mm in front of the VP. Draw its front and top views.
Draw the projections of a regular hexagon of 25 mm side, having one of its sides in the HP and inclined at 60° to the VP, and its surface making an angle of 45° with the HP.
(OR)
Draw the projections of a cone, base 75 mm diameter and axis 100 mm long, lying on the HP on one of its generators with the axis parallel to the VP.
--- Content provided by FirstRanker.com ---
A cube of 50 mm side rests centrally on top of a square prism of 60 mm side and 80 mm height. The axes of the solids are in the same line. Two of the faces of the cube are parallel to the VP. Draw the isometric projection of the solids.
(OR)
Draw the isometric view of a hexagonal prism having base side 30 mm and axis 70 mm long. The prism is resting on one of its ends on the HP with two rectangular faces parallel to the VP.
--- Content provided by FirstRanker.com ---
Draw the front view, top view and side view of the following figure.
(OR)
Draw the front view, top view and side view of the following figure.
--- Content provided by FirstRanker.com ---