Download GTU (Gujarat Technological University) BE/BTech (Bachelor of Engineering / Bachelor of Technology) 2019 Winter 1st And 2nd Sem Old 110010 Mechanics Of Solids Previous Question Paper
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ? I & II (OLD) EXAMINATION ? WINTER 2019
Subject Code: 110010 Date: 10/01/2020
Subject Name: Mechanics Of Solids
Time: 10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Attempt any five questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q.1 (a) Differentiate between: (i) Scalar Quantities and Vector Quantities,
(ii) Fundamental units and derived units.
[04]
(b) Define force and explain various force systems with illustrations. [03]
(c) Find Magnitude & direction of resultant force as shown in figure below.
[07]
Q.2 (a) Determine magnitude, direction and perpendicular distance from ?O?, of
the resultant for the force system shown in figure below.
[07]
(b) The T- section of beam as shown in figure below, determine the centroid
of the section of the beam.
[07]
Q.3 (a) Find the reactions at the fixed support for a beam loaded as shown in
figure below.
[07]
FirstRanker.com - FirstRanker's Choice
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ? I & II (OLD) EXAMINATION ? WINTER 2019
Subject Code: 110010 Date: 10/01/2020
Subject Name: Mechanics Of Solids
Time: 10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Attempt any five questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q.1 (a) Differentiate between: (i) Scalar Quantities and Vector Quantities,
(ii) Fundamental units and derived units.
[04]
(b) Define force and explain various force systems with illustrations. [03]
(c) Find Magnitude & direction of resultant force as shown in figure below.
[07]
Q.2 (a) Determine magnitude, direction and perpendicular distance from ?O?, of
the resultant for the force system shown in figure below.
[07]
(b) The T- section of beam as shown in figure below, determine the centroid
of the section of the beam.
[07]
Q.3 (a) Find the reactions at the fixed support for a beam loaded as shown in
figure below.
[07]
(b) Calculate shear force and bending moment at salient points of the beam
shown in figure below. Draw shear force diagram and bending moment
diagram for the beam.
[07]
Q.4 (a) A 4 m long ladder has to carry a person of 75 kg weight at 3.5 m distance
from floor, along the length of ladder. The self-weight of ladder is of 150
N. Find the maximum distance of lower end of ladder from vertical wall so
that it does not slide. The coefficient of friction between floor and ladder is
0.3 and that between vertical wall and ladder is 0.2.
[07]
(b) Explain parallel axis theorem and perpendicular axis theorem. [07]
Q.5 (a) Draw variation of shear stress across the cross section of Rectangular,
Triangle, T shape, Channel C-shape and I-shape.
[07]
(b) A simply supported beam of span 4.0 m has a cross-section 200 mm ? 300
mm. If the permissible stress in the material of the beam is 20N/mm
2
,
determine maximum UDL it can carry.
[07]
Q.6 (a) At a point in a strained material two mutually perpendicular tensile stresses
of 420 N/mm
2
and 280 N/mm
2
are acting. There is also a clockwise shear
stress of 200 N/mm
2
. Determine the values of principal stresses and location
of principal plane.
[07]
(b) Calculate the moment of inertia of the plane area shown in figure below
with respect to the axis passing through the base ?AB?.
[07]
Q.7 (a) An assembly made up from Aluminium and Steel bars as shown in the
figure below is initially stress free at temperature 32? C .The assembly is
heated to bring its temperature to 82? C. Find the stresses developed in
each bar. The coefficient of thermal expansions is 1.25 x 10
-5
/?C & 2.25 x
[07]
FirstRanker.com - FirstRanker's Choice
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ? I & II (OLD) EXAMINATION ? WINTER 2019
Subject Code: 110010 Date: 10/01/2020
Subject Name: Mechanics Of Solids
Time: 10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Attempt any five questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q.1 (a) Differentiate between: (i) Scalar Quantities and Vector Quantities,
(ii) Fundamental units and derived units.
[04]
(b) Define force and explain various force systems with illustrations. [03]
(c) Find Magnitude & direction of resultant force as shown in figure below.
[07]
Q.2 (a) Determine magnitude, direction and perpendicular distance from ?O?, of
the resultant for the force system shown in figure below.
[07]
(b) The T- section of beam as shown in figure below, determine the centroid
of the section of the beam.
[07]
Q.3 (a) Find the reactions at the fixed support for a beam loaded as shown in
figure below.
[07]
(b) Calculate shear force and bending moment at salient points of the beam
shown in figure below. Draw shear force diagram and bending moment
diagram for the beam.
[07]
Q.4 (a) A 4 m long ladder has to carry a person of 75 kg weight at 3.5 m distance
from floor, along the length of ladder. The self-weight of ladder is of 150
N. Find the maximum distance of lower end of ladder from vertical wall so
that it does not slide. The coefficient of friction between floor and ladder is
0.3 and that between vertical wall and ladder is 0.2.
[07]
(b) Explain parallel axis theorem and perpendicular axis theorem. [07]
Q.5 (a) Draw variation of shear stress across the cross section of Rectangular,
Triangle, T shape, Channel C-shape and I-shape.
[07]
(b) A simply supported beam of span 4.0 m has a cross-section 200 mm ? 300
mm. If the permissible stress in the material of the beam is 20N/mm
2
,
determine maximum UDL it can carry.
[07]
Q.6 (a) At a point in a strained material two mutually perpendicular tensile stresses
of 420 N/mm
2
and 280 N/mm
2
are acting. There is also a clockwise shear
stress of 200 N/mm
2
. Determine the values of principal stresses and location
of principal plane.
[07]
(b) Calculate the moment of inertia of the plane area shown in figure below
with respect to the axis passing through the base ?AB?.
[07]
Q.7 (a) An assembly made up from Aluminium and Steel bars as shown in the
figure below is initially stress free at temperature 32? C .The assembly is
heated to bring its temperature to 82? C. Find the stresses developed in
each bar. The coefficient of thermal expansions is 1.25 x 10
-5
/?C & 2.25 x
[07]
10
-5
/ ?C for steel and aluminum respectively. Take Es= 200 GPa & Eal=
75 GPa.
(b) Define : (i) Stress (ii) Stain (iii) Bulk Modulus (iv) Poisson?s ratio (v)
shear stress (vi) Modulus of Elasticity (vii) Moment of Couple.
[07]
**********
FirstRanker.com - FirstRanker's Choice
This post was last modified on 20 February 2020