Download GTU BE/B.Tech 2019 Winter 8th Sem New 2180609 Foundation Engineering Question Paper

FirstRanker.com

GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER- VIII (New) EXAMINATION — WINTER 2019

--- Content provided by‍ FirstRanker.com ---

Subject Code: 2180609 Date: 27/11/2019
Subject Name: Foundation Engineering
Time: 02:30 PM TO 05:00 PM Total Marks: 70

Instructions:

1. Attempt all questions.

--- Content provided by‌ FirstRanker.com ---

2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.

MARKS

Q.1 (a) Define following; 03
Bearing capacity, Shallow foundation, Allowable soil pressure

--- Content provided by‍ FirstRanker.com ---

(b) What do you understand by disturbed and undisturbed soil samples? 04
How can you obtain disturbed soil samples?

(c) Define footing and foundation. Explain the factors that affect the 07
selection of type of foundation.

Q.2 (a) Which are the favorable conditions for a mat/raft foundation? 03

--- Content provided by⁠ FirstRanker.com ---

(b) Explain the typical characteristics of general shear failure and local 04
shear failure.

(c) List out the in-situ penetration tests. Explain any one in detail with 07
neat sketch.

OR

--- Content provided by‌ FirstRanker.com ---

(c) A strip footing 2 m wide carries a load intensity of 400 kN/m? at a 07
depth of 1.2 m in sand. The saturated unit weight of sand is 19.5
kN/m? and unit weight above water table is 16.8 kN/m3. The shear
strength parameters are c= 0 and @ = 35°. Determine the factor of
safety with respect to shear failure for the following cases, using

--- Content provided by FirstRanker.com ---

Terzaghi’s bearing capacityequation;
(a) Water table is 1.2.mbelow GL
(b) Water table at. GL itself.
Adopt Nc =57.8, Nq=41.4 and Ny=42.4

Q.3 (a) What are the assumptions made in the derivation of Terzaghi’s 03

--- Content provided by​ FirstRanker.com ---

bearing capacity theory? Write the equation for the ultimate bearing
capacity.

(b) Explain Feld’s rule for group efficiency of piles. Determine the 04
efficiency of group of nine piles (3x3) by Feld’s rule.

(c) Enlist different types of retaining walls. Explain any three with neat 07

--- Content provided by‍ FirstRanker.com ---

sketches showing all important elements.

OR

Q.3 (a) Describe the corrections required to N-value obtained from standard 03
penetration test.

(b) Classify the piles on the basis of their function with sketches. 04

--- Content provided by FirstRanker.com ---

(c) Discuss stability criteria of cantilever retaining wall. 07

Q4 (a) Write full form of CNS layer. Explain concept of CNS layer. 03

(b) Enlist different pile driving hammers. Explain any two in detail. 04

(c) A group of 16 piles of 0.6 m diameter is arranged in a square pattern 07
with centre to centre spacing of 1.2 m. The piles are 10 m long and

--- Content provided by‌ FirstRanker.com ---

embedded in soft clay with cohesion 30 kN/m?. Bearing resistance

ultimate load capacity of pile group.

OR

Q.4 (a) Discuss the characteristics of the expansive soils. 03

--- Content provided by‍ FirstRanker.com ---

(b) Define negative skin friction. What is its effect on the pile? 04

(c) Explain detail procedure of pile load test with figure showing entire 07
test setup.

Q.5 (a) Which are the forces acting on retaining wall? 03

(b) Describe swelling potential and swelling pressure. 04

--- Content provided by⁠ FirstRanker.com ---

(c) Explain in detail various applications of geosynthetics. 07

OR

Q.5 (a) Differentiate between gravity retaining wall and counterfort retaining 03
wall.

(b) What is ‘active zone’ in black cotton soil? State properties of black 04

--- Content provided by‍ FirstRanker.com ---

cotton soil.

(c) Classify geotextile materials. What are the basic functions performed 07
by geotextiles?

FirstRanker.com

--- Content provided by​ FirstRanker.com ---