Download GTU BE/B.Tech 2019 Winter 3rd Sem New 2131906 Kinematics Of Machines Question Paper

FirstRanker.com

Subject Code: 2131906

GUJARAT TECHNOLOGICAL UNIVERSITY

--- Content provided by​ FirstRanker.com ---

Instructions:

--- Content provided by​ FirstRanker.com ---

1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.

1. Q1 (a) Define the following terms: Kinematics, Kinematics Chain, and Kinematics Mechanism. MARKS 03
2. (b) Classify the kinematics pairs. MARKS 04

--- Content provided by⁠ FirstRanker.com ---

3. (c) Explain inversion of four bar mechanism with the help of examples. MARKS 07

1. Q2 (a) Explain the types of instantaneous centers. MARKS 03
2. (b) Explain coriolis component of acceleration. MARKS 04
3. (c) In Fig a four-link mechanism is shown. The dimensions of various links are; AB = 50 mm, BC=66 mm, CD= 56 mm and AD=100 mm. Determine (1) velocity of the point C (ii) Velocity of the point E on the link BC, if BE = 40 mm, (ii1) Angular Velocity of the link BC and CD, (iv) Rubbing velocity of pins A, B, C and D when the radii of the pins are 30, 40, 25, and 35 mm respectively. At the instant angle DAB = 60°, the link AB has an angular velocity of 10.5 rad/s and rotates in counter-clockwise direction: MARKS 07
   

--- Content provided by​ FirstRanker.com ---

OR

1. Q3 (a) PQRS is a four bar chain with links PS fixed. The lengths of the links are PQ = 62.5 mm; QR = 175 mm; RS = 112.5 mm; and PS = 200 mm. The crank PQ rotates at 10 rad/s clockwise. Draw the velocity and acceleration diagram when angle QPS = 60° and Q and R lies on the same side of PS. Find the angular velocity and acceleration of link QR and RS. MARKS 07
2. (b) What is a straight line motion mechanism? Give its classification. MARKS 03
3. Q3 (a) With a neat sketch of Hart’s Mechanism prove that it Produces an exact straight line motion. MARKS 04
4. (b) Show Davis’s steering gear mechanism and derive equation for it. MARKS 07

--- Content provided by⁠ FirstRanker.com ---

OR

1. Q4 (a) Define synthesis. MARKS 03
2. (b) Explain function generation, path generation and motion generation. MARKS 04

Date: 5/12/2019 Total Marks: 70

1. Q4 (a) Define: Module, Tooth thickness, Backlash. MARKS 03

--- Content provided by‌ FirstRanker.com ---

2. (b) What do you mean by interference in gear? MARKS 04
3. (c) Derive the equation for finding the length of path of contact for pair of involute gear. MARKS 07

OR

1. Q5 (a) Give the three applications of gear trains. MARKS 03
2. (b) Explain compound gear train with a neat sketch. MARKS 04

--- Content provided by‌ FirstRanker.com ---

3. (c) In a reverted epicyclic gear train, the arm A carries two gears B and C and a compound gear D-E. The gear B meshes with gear E and the gear C meshes with gear D. the number of teeth on gear B, C and D are 75, 30, and 90 respectively. Find the speed and direction of gear C when gear B is fixed and the arm A makes 100 rpm clockwise. MARKS 07

1. Q5 (a) Define cam and follower. MARKS 03
2. (b) Explain types of cam with sketches. MARKS 04
3. (c) Draw the cam profile for a disc cam and knife edge follower from the following data for one revolution of cam. (i) Angle of rise = 60° (i) Follower lift = 40 mm with uniform velocity (iii) Angle of dwell (at rise) = 30° (iv) Angle of fall = 60° where follower moves with uniform velocity. (v) For remaining period of 210, the follower remains in same position (vi) Diameter of base circle of cam = 50 mm MARKS 07

OR

--- Content provided by‌ FirstRanker.com ---

1. Q5 (@ Define terms related to cam: Pitch circle, Pressure angle, Stroke of the follower. MARKS 03
2. (b) Classify the followers. MARKS 04
3. (c) A flat face follower is moved with S. H. M. by a disc cam. Follower rises for 30 mm during the cam rotation(of 120°, remains in the same position during 30° of the cam rotation; follower returns to original position during further 120° of rotation of cam (@nd then for last 90° of rotation follower remain stationary. Minimum radius of cam is 25 mm and the diameter of the circular flat face follower is 25 mm. Draw the cam profile. MARKS 07