Download GTU (Gujarat Technological University) BE/BTech (Bachelor of Engineering / Bachelor of Technology) 2019 Summer 1st Sem And 2nd Sem Old 110013 Engineering Graphics Previous Question Paper
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?I &II (OLD) EXAMINATION ? SUMMER-2019
Subject Code: 110013 Date: 18/06/2019
Subject Name: Engineering Graphics
Time: 10:30 AM TO 01:30 PM Total Marks: 70
Instructions:
1. Attempt any five questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q.1 (a) Draw symbol of third angle projection method with usual dimension. 02
(b) Draw front view, top view and left hand side view of the object shown in Fig 1
in first angle projection method.
Fig 1
12
Q.2 (a) Draw an ellipse using an arc of circle method having major axis 100 mm and
minor axis 70 mm long.
07
(b) A six hit by Sachin attain maximum height of 42 meter before it cross and fall
outside the boundary 66 meter away from batting crease, draw the path of ball
and name the curve.
07
Q.3 (a) While pendulum swings 72
0
from its initial position and return back, a point on
the rod of pendulum moves 96 mm down to other end. Draw the loci of point.
07
(b) The line AB having it top view ?a b? 55 mm long and inclined to VP by 30
0
. The
end A is 18 mm above HP and 9 mm in front of VP. While end B is 56 mm above
HP and in front quadrant. Draw the projections of line and find its true length, its
inclination with HP and VP.
07
FirstRanker.com - FirstRanker's Choice
1
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?I &II (OLD) EXAMINATION ? SUMMER-2019
Subject Code: 110013 Date: 18/06/2019
Subject Name: Engineering Graphics
Time: 10:30 AM TO 01:30 PM Total Marks: 70
Instructions:
1. Attempt any five questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q.1 (a) Draw symbol of third angle projection method with usual dimension. 02
(b) Draw front view, top view and left hand side view of the object shown in Fig 1
in first angle projection method.
Fig 1
12
Q.2 (a) Draw an ellipse using an arc of circle method having major axis 100 mm and
minor axis 70 mm long.
07
(b) A six hit by Sachin attain maximum height of 42 meter before it cross and fall
outside the boundary 66 meter away from batting crease, draw the path of ball
and name the curve.
07
Q.3 (a) While pendulum swings 72
0
from its initial position and return back, a point on
the rod of pendulum moves 96 mm down to other end. Draw the loci of point.
07
(b) The line AB having it top view ?a b? 55 mm long and inclined to VP by 30
0
. The
end A is 18 mm above HP and 9 mm in front of VP. While end B is 56 mm above
HP and in front quadrant. Draw the projections of line and find its true length, its
inclination with HP and VP.
07
2
Q.4 (a) A line AB, 65 mm long has its end A 20 mm above H.P. and 25mm in front of
VP. The end B is 40 mm above H.P. and 65 mm in front of V.P. Draw the
projections of AB and shows its inclination with H.P. and V.P.
07
(b) A regular pentagon of 30 mm side is resting in VP with the side AB and making
an angle of 40
0
with HP. Plane of the pentagon makes 35
0
with VP. Draw its
projections.
07
Q.5 (a) A thin circular plate of 60 mm diameter is inclined at an angle of 60
0
with HP
while diameter of it is parallel to both HP and VP. Center of the plate is 50 mm
from VP and 40 mm from HP. Draw front view and top view of plate.
07
(b) On a map the distance between Somnath and Dwarka is shown by 12 cm. The
actual distance is 240 km. Draw a diagonal scale to read this map in kilometers
correctly and long enough to read 300 km. also show distance of 128 km between
Porbandar and Somnath
07
Q.6 (a) A regular hexagonal pyramid, side of base 30 mm side and height 60 mm is
resting on the ground on one of its edge of the base. The axis of thy pyramid is
inclined by 30
0
with HP and the edge on which it rest is inclined by 45
0
to the
VP. Draw the projections of solid.
07
(b) A cone 40 mm diameter of base and 60 mm height is resting on HP on its base.
A section plane inclined to 45
0
with HP and perpendicular to VP cuts the cone in
two halves. Draw the projection of truncated cone and develop its lateral surface.
07
Q.7 (a) Draw isometric circle on the three side of cube of 50 mm dimension. 04
(b) Figure 2 shows front view and side view of an object, draw isometric projections.
Fig. 2
10
*************
FirstRanker.com - FirstRanker's Choice
This post was last modified on 20 February 2020