Download GTU (Gujarat Technological University) BE/BTech (Bachelor of Engineering / Bachelor of Technology) 2018 Winter 7th Sem Old 171903 Computer Integrated Manufacturing Previous Question Paper
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?VII (OLD) EXAMINATION ? WINTER 2018
Subject Code: 171903 Date: 26/11/2018
Subject Name: Computer Integrated Manufacturing
Time: 10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q.1 (a) How we could justify the CIM to implement in the Indian companies? 07
(b) What are the basic components of CNC system? Briefly discuss each of them. 07
Q.2 (a) Write a manual part program for the turning component shown in fig. 1. Raw
material is MS ?45 X 150 mm, Spindle speed S =400 RPM and Feed F = 0.25
mm/rev.
Figure 1
07
(b) What is the difference between a canned cycle and subroutine? Discuss how a
canned cycle can be useful in writing a part program.
07
OR
(b) What is tool compensation? Explain tool length and cutter radius compensation. 07
Q.3 (a) What do you mean by FMS? Explain various FMS layouts for material handling
system.
07
(b) What is advantage of group technology in manufacturing? 07
OR
Q.3 (a) How just in time (JIT) improves the manufacturing system? 07
(b) What is parts classification and coding? Explain any one parts classification and
coding system.
07
Q.4 (a) Which parameters should be considered before selecting the robot for
manufacturing sector?
07
(b) Explain the types of flexibilities in FMS and discuss the factors on which these
flexibilities depend
07
OR
Q.4 (a) Explain various sensors and actuators used in robots. 07
(b) What is an AGV? What are different types of AGVs? What are the benefits of using
AGVs?
07
FirstRanker.com - FirstRanker's Choice
1
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?VII (OLD) EXAMINATION ? WINTER 2018
Subject Code: 171903 Date: 26/11/2018
Subject Name: Computer Integrated Manufacturing
Time: 10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q.1 (a) How we could justify the CIM to implement in the Indian companies? 07
(b) What are the basic components of CNC system? Briefly discuss each of them. 07
Q.2 (a) Write a manual part program for the turning component shown in fig. 1. Raw
material is MS ?45 X 150 mm, Spindle speed S =400 RPM and Feed F = 0.25
mm/rev.
Figure 1
07
(b) What is the difference between a canned cycle and subroutine? Discuss how a
canned cycle can be useful in writing a part program.
07
OR
(b) What is tool compensation? Explain tool length and cutter radius compensation. 07
Q.3 (a) What do you mean by FMS? Explain various FMS layouts for material handling
system.
07
(b) What is advantage of group technology in manufacturing? 07
OR
Q.3 (a) How just in time (JIT) improves the manufacturing system? 07
(b) What is parts classification and coding? Explain any one parts classification and
coding system.
07
Q.4 (a) Which parameters should be considered before selecting the robot for
manufacturing sector?
07
(b) Explain the types of flexibilities in FMS and discuss the factors on which these
flexibilities depend
07
OR
Q.4 (a) Explain various sensors and actuators used in robots. 07
(b) What is an AGV? What are different types of AGVs? What are the benefits of using
AGVs?
07
2
Q.5 (a) Sketch and explain cylindrical and SCARA configuration of industrial robots. 07
(b) Explain the problems encountered with traditional production planning control
(PPC).
07
OR
Q.5 (a) Explain on-line and off-line programming methods of robots. State the application
of robot.
07
(b) Explain with neat diagram generative type CAPP. 07
*************
FirstRanker.com - FirstRanker's Choice
This post was last modified on 20 February 2020