Download JNTU Kakinada B.Tech 2-2 2014 August METALLURGY AND MATERIAL SCIENCE Question Paper

Download JNTUK (Jawaharlal Nehru Technological University Kakinada) B.Tech 2-2 (2nd Year 2nd Sem) METALLURGY AND MATERIAL SCIENCE Question Paper.

FirstRanker.com
|''|''|||''|'''|||'|
Code No: R22035

II B. Tech II Semester Regular Examinations, August -2014
METALLURGY AND MATERIAL SCIENCE
(Com. to ME, AME, MM)
Time: 3 hours Max. Marks: 75

Answer any FIVE Questions
All Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~

1. a) Explain crystallization process in pure metals.
b) What is bonding energy, bond length and atomic radii? Explain them. (7M+8M)

2. a) Distinguish between interstitial compounds and interstitial solid solutions.
b) What are the conditions that are favourable for extensive solid solubility of one element in
another? Explain them. (8M+7M)

3. a) What do you understand by the term equilibrium diagram? Explain with an example.
b) What is lever rule? Explain how it is useful. (8M+7M)

4. a) Write the classification of steels.
b) Explain the microstructure, properties and applications of Spheroidal cast iron. (8M+7M)

5. Explain the following:
i) Cryogenic treatment of alloys
ii) Hardenability (8M+7M)

6. Explain the structure and properties of copper and its alloys. (15M)

7. a) Write the properties and applications of crystalline ceramics.
b) How are ceramic components formed? Explain. (8M+7M)

8. a) What factors do influence the final properties of composites?
b) What is a hybrid composite? Mention two important advantages of hybrid composites over
normal fibre composites. (7M+8M)






1 of 1

R10
SET - 1


FirstRanker.com - FirstRanker's Choice
FirstRanker.com
|''|''|||''|'''|||'|
Code No: R22035

II B. Tech II Semester Regular Examinations, August -2014
METALLURGY AND MATERIAL SCIENCE
(Com. to ME, AME, MM)
Time: 3 hours Max. Marks: 75

Answer any FIVE Questions
All Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~

1. a) Explain crystallization process in pure metals.
b) What is bonding energy, bond length and atomic radii? Explain them. (7M+8M)

2. a) Distinguish between interstitial compounds and interstitial solid solutions.
b) What are the conditions that are favourable for extensive solid solubility of one element in
another? Explain them. (8M+7M)

3. a) What do you understand by the term equilibrium diagram? Explain with an example.
b) What is lever rule? Explain how it is useful. (8M+7M)

4. a) Write the classification of steels.
b) Explain the microstructure, properties and applications of Spheroidal cast iron. (8M+7M)

5. Explain the following:
i) Cryogenic treatment of alloys
ii) Hardenability (8M+7M)

6. Explain the structure and properties of copper and its alloys. (15M)

7. a) Write the properties and applications of crystalline ceramics.
b) How are ceramic components formed? Explain. (8M+7M)

8. a) What factors do influence the final properties of composites?
b) What is a hybrid composite? Mention two important advantages of hybrid composites over
normal fibre composites. (7M+8M)






1 of 1

R10
SET - 1


FirstRanker.com
|''|''|||''|'''|||'|
Code No: R22035

II B. Tech II Semester Regular Examinations, August -2014
METALLURGY AND MATERIAL SCIENCE
(Com. to ME, AME, MM)
Time: 3 hours Max. Marks: 75

Answer any FIVE Questions
All Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~

1. a) Discuss various types of bonds in solids and explain them.
b) Explain the effect of grain boundaries on the properties of metals/alloys. (8M+7M)

2. a) Distinguish between alloy and alloy system with suitable examples.
b) Explain Hume Rotherys rules in detail. (8M+7M)

3. a) Explain the various applications of phase diagrams.
b) Describe peritectic system with an example. (8M+7M)

4. a) Explain the structure and properties of plain carbon steels. (7M+8M)
b) Write a short note on the following:
i) Hadfield manganese steels
ii) Malleable cast iron

5. a) Normalized steels are stronger than annealed steels. Explain.
b) Explain the effect of alloying elements on Fe-Fe3C system. (8M+7M)

6. a) Explain the important features of alpha and alpha-beta alloys of titanium.
b) Why do aluminium alloys respond to age hardening? Give some examples. (8M+7M)

7. a) Write the properties and applications of cermets.
b) Describe two methods for preparing ceramic raw materials for processing. (8M+7M)

8. a) Explain the various methods of component manufacture of composites.
b) What is MMC? Where are they used? Classify the MMCs according to the type of
reinforcement. (8M+7M)





1 of 1

SET - 2
R10


FirstRanker.com - FirstRanker's Choice
FirstRanker.com
|''|''|||''|'''|||'|
Code No: R22035

II B. Tech II Semester Regular Examinations, August -2014
METALLURGY AND MATERIAL SCIENCE
(Com. to ME, AME, MM)
Time: 3 hours Max. Marks: 75

Answer any FIVE Questions
All Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~

1. a) Explain crystallization process in pure metals.
b) What is bonding energy, bond length and atomic radii? Explain them. (7M+8M)

2. a) Distinguish between interstitial compounds and interstitial solid solutions.
b) What are the conditions that are favourable for extensive solid solubility of one element in
another? Explain them. (8M+7M)

3. a) What do you understand by the term equilibrium diagram? Explain with an example.
b) What is lever rule? Explain how it is useful. (8M+7M)

4. a) Write the classification of steels.
b) Explain the microstructure, properties and applications of Spheroidal cast iron. (8M+7M)

5. Explain the following:
i) Cryogenic treatment of alloys
ii) Hardenability (8M+7M)

6. Explain the structure and properties of copper and its alloys. (15M)

7. a) Write the properties and applications of crystalline ceramics.
b) How are ceramic components formed? Explain. (8M+7M)

8. a) What factors do influence the final properties of composites?
b) What is a hybrid composite? Mention two important advantages of hybrid composites over
normal fibre composites. (7M+8M)






1 of 1

R10
SET - 1


FirstRanker.com
|''|''|||''|'''|||'|
Code No: R22035

II B. Tech II Semester Regular Examinations, August -2014
METALLURGY AND MATERIAL SCIENCE
(Com. to ME, AME, MM)
Time: 3 hours Max. Marks: 75

Answer any FIVE Questions
All Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~

1. a) Discuss various types of bonds in solids and explain them.
b) Explain the effect of grain boundaries on the properties of metals/alloys. (8M+7M)

2. a) Distinguish between alloy and alloy system with suitable examples.
b) Explain Hume Rotherys rules in detail. (8M+7M)

3. a) Explain the various applications of phase diagrams.
b) Describe peritectic system with an example. (8M+7M)

4. a) Explain the structure and properties of plain carbon steels. (7M+8M)
b) Write a short note on the following:
i) Hadfield manganese steels
ii) Malleable cast iron

5. a) Normalized steels are stronger than annealed steels. Explain.
b) Explain the effect of alloying elements on Fe-Fe3C system. (8M+7M)

6. a) Explain the important features of alpha and alpha-beta alloys of titanium.
b) Why do aluminium alloys respond to age hardening? Give some examples. (8M+7M)

7. a) Write the properties and applications of cermets.
b) Describe two methods for preparing ceramic raw materials for processing. (8M+7M)

8. a) Explain the various methods of component manufacture of composites.
b) What is MMC? Where are they used? Classify the MMCs according to the type of
reinforcement. (8M+7M)





1 of 1

SET - 2
R10


FirstRanker.com
|''|''|||''|'''|||'|
Code No: R22035

II B. Tech II Semester Regular Examinations, August -2014
METALLURGY AND MATERIAL SCIENCE
(Com. to ME, AME, MM)
Time: 3 hours Max. Marks: 75

Answer any FIVE Questions
All Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~


1. a) Explain why we should study the crystal structure of metals.
b) Discuss various types of crystal imperfections, with the help of neat sketches. (8M+7M)

2. a) Explain types of solid solutions in detail. (7M+8M)
b) Write a short note on the following:
i) Intermediate alloy phases
ii) Electron compounds

3. a) Explain eutectic system with an example.
b) Discuss the Gibbs phase rule in detail. (8M+7M)

4. a) Explain the structure, properties and applications of White cast iron.
b) Write a short note on the following: (7M+8M)
i) Tool and die steels
ii) Low alloy steels

5. a) Explain surface hardening methods in detail.
b) Discuss the effect of alloying elements on hardenability. (8M+7M)

6. Explain the structure and properties of Aluminium and its alloys. (15M)

7. a) Write the properties and applications of nano materials.
b) Compare the properties of crystalline ceramics and glass ceramics. (8M+7M)

8. a) Define the term composite and explain what are advanced composites? Give few examples.
b) Explain the following: (7M+8M)
i) C-C composites
ii) Fibre reinforced materials


1 of 1
SET - 3
R10


FirstRanker.com - FirstRanker's Choice
FirstRanker.com
|''|''|||''|'''|||'|
Code No: R22035

II B. Tech II Semester Regular Examinations, August -2014
METALLURGY AND MATERIAL SCIENCE
(Com. to ME, AME, MM)
Time: 3 hours Max. Marks: 75

Answer any FIVE Questions
All Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~

1. a) Explain crystallization process in pure metals.
b) What is bonding energy, bond length and atomic radii? Explain them. (7M+8M)

2. a) Distinguish between interstitial compounds and interstitial solid solutions.
b) What are the conditions that are favourable for extensive solid solubility of one element in
another? Explain them. (8M+7M)

3. a) What do you understand by the term equilibrium diagram? Explain with an example.
b) What is lever rule? Explain how it is useful. (8M+7M)

4. a) Write the classification of steels.
b) Explain the microstructure, properties and applications of Spheroidal cast iron. (8M+7M)

5. Explain the following:
i) Cryogenic treatment of alloys
ii) Hardenability (8M+7M)

6. Explain the structure and properties of copper and its alloys. (15M)

7. a) Write the properties and applications of crystalline ceramics.
b) How are ceramic components formed? Explain. (8M+7M)

8. a) What factors do influence the final properties of composites?
b) What is a hybrid composite? Mention two important advantages of hybrid composites over
normal fibre composites. (7M+8M)






1 of 1

R10
SET - 1


FirstRanker.com
|''|''|||''|'''|||'|
Code No: R22035

II B. Tech II Semester Regular Examinations, August -2014
METALLURGY AND MATERIAL SCIENCE
(Com. to ME, AME, MM)
Time: 3 hours Max. Marks: 75

Answer any FIVE Questions
All Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~

1. a) Discuss various types of bonds in solids and explain them.
b) Explain the effect of grain boundaries on the properties of metals/alloys. (8M+7M)

2. a) Distinguish between alloy and alloy system with suitable examples.
b) Explain Hume Rotherys rules in detail. (8M+7M)

3. a) Explain the various applications of phase diagrams.
b) Describe peritectic system with an example. (8M+7M)

4. a) Explain the structure and properties of plain carbon steels. (7M+8M)
b) Write a short note on the following:
i) Hadfield manganese steels
ii) Malleable cast iron

5. a) Normalized steels are stronger than annealed steels. Explain.
b) Explain the effect of alloying elements on Fe-Fe3C system. (8M+7M)

6. a) Explain the important features of alpha and alpha-beta alloys of titanium.
b) Why do aluminium alloys respond to age hardening? Give some examples. (8M+7M)

7. a) Write the properties and applications of cermets.
b) Describe two methods for preparing ceramic raw materials for processing. (8M+7M)

8. a) Explain the various methods of component manufacture of composites.
b) What is MMC? Where are they used? Classify the MMCs according to the type of
reinforcement. (8M+7M)





1 of 1

SET - 2
R10


FirstRanker.com
|''|''|||''|'''|||'|
Code No: R22035

II B. Tech II Semester Regular Examinations, August -2014
METALLURGY AND MATERIAL SCIENCE
(Com. to ME, AME, MM)
Time: 3 hours Max. Marks: 75

Answer any FIVE Questions
All Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~


1. a) Explain why we should study the crystal structure of metals.
b) Discuss various types of crystal imperfections, with the help of neat sketches. (8M+7M)

2. a) Explain types of solid solutions in detail. (7M+8M)
b) Write a short note on the following:
i) Intermediate alloy phases
ii) Electron compounds

3. a) Explain eutectic system with an example.
b) Discuss the Gibbs phase rule in detail. (8M+7M)

4. a) Explain the structure, properties and applications of White cast iron.
b) Write a short note on the following: (7M+8M)
i) Tool and die steels
ii) Low alloy steels

5. a) Explain surface hardening methods in detail.
b) Discuss the effect of alloying elements on hardenability. (8M+7M)

6. Explain the structure and properties of Aluminium and its alloys. (15M)

7. a) Write the properties and applications of nano materials.
b) Compare the properties of crystalline ceramics and glass ceramics. (8M+7M)

8. a) Define the term composite and explain what are advanced composites? Give few examples.
b) Explain the following: (7M+8M)
i) C-C composites
ii) Fibre reinforced materials


1 of 1
SET - 3
R10


FirstRanker.com
|''|''|||''|'''|||'|
Code No: R22035

II B. Tech II Semester Regular Examinations, August -2014
METALLURGY AND MATERIAL SCIENCE
(Com. to ME, AME, MM)
Time: 3 hours Max. Marks: 75

Answer any FIVE Questions
All Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~

1. a) Describe the reasons for high thermal and electrical conductivity in metallic bonded solids.
b) Write the properties of covalent bonded solids. (8M+7M)

2. a) Write short notes on Hume-Rothery?s rules.
b) What is an intermediate alloy phases. Explain in detail. (8M+7M)

3. Explain the following: (5M+5M+5M)
i) Isomorphous alloy systems
ii) Equilibrium cooling and heating of alloys
iii) Lever rule

4. a) Explain the difference in microstructure and properties of white and grey cast iron.
b) Compare the properties of plain carbon steels with those of alloy steels. (8M+7M)

5. Explain the following: (8M+7M)
i) Age hardening treatment
ii) TTT diagrams

6. Discuss the various types of titanium alloys giving their composition, properties and uses.
(15M)
7. a) What is Nano material? Explain its applications.
b) Write the properties and applications of abrasive materials. (8M+7M)

8. a) Explain the classification of composites in detail. (7M+8M)
b) Write a short on the following:
i) Particle reinforced materials
ii) Metal matrix composite




1 of 1
SET - 4
R10


FirstRanker.com - FirstRanker's Choice

This post was last modified on 03 December 2019