Download GATE (Graduate Aptitude Test in Engineering) Last 10 Years 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011 and 2010 ME03 Mechanical Engineering Question Papers With Solutions And Answer Keys
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
GATE 2016 General Aptitude - GA Set-3
3/3
Q.10 A wire of length 340 mm is to be cut into two parts. One of the parts is to be made into a square and
the other into a rectangle where sides are in the ratio of 1:2. What is the length of the side of the
square (in mm) such that the combined area of the square and the rectangle is a MINIMUM?
(A) 30 (B) 40 (C) 120 (D) 180
END OF THE QUESTION PAPER
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
GATE 2016 General Aptitude - GA Set-3
3/3
Q.10 A wire of length 340 mm is to be cut into two parts. One of the parts is to be made into a square and
the other into a rectangle where sides are in the ratio of 1:2. What is the length of the side of the
square (in mm) such that the combined area of the square and the rectangle is a MINIMUM?
(A) 30 (B) 40 (C) 120 (D) 180
END OF THE QUESTION PAPER
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 A real square matrix A is called skew-symmetric if
(A) A
T
= A
(B) A
T
= A
-1
(C) A
T
= ?A
(D) A
T
= A+A
-1
Q.2
Lt
?? ?0
log
e
(1+4?? )
e
3?? ?1
is equal to
(A) 0
(B)
1
12
(C)
4
3
(D) 1
Q.3 Solutions of Laplace?s equation having continuous second-order partial derivatives are called
(A) biharmonic functions
(B) harmonic functions
(C) conjugate harmonic functions
(D) error functions
Q.4 The area (in percentage) under standard normal distribution curve of random variable Z within
limits from ?3 to +3 is __________
Q.5
The root of the function f(x) = x
3
+x ?1 obtained after first iteration on application of Newton-
Raphson scheme using an initial guess of x
0
=1 is
(A) 0.682 (B) 0.686 (C) 0.750 (D) 1.000
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
GATE 2016 General Aptitude - GA Set-3
3/3
Q.10 A wire of length 340 mm is to be cut into two parts. One of the parts is to be made into a square and
the other into a rectangle where sides are in the ratio of 1:2. What is the length of the side of the
square (in mm) such that the combined area of the square and the rectangle is a MINIMUM?
(A) 30 (B) 40 (C) 120 (D) 180
END OF THE QUESTION PAPER
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 A real square matrix A is called skew-symmetric if
(A) A
T
= A
(B) A
T
= A
-1
(C) A
T
= ?A
(D) A
T
= A+A
-1
Q.2
Lt
?? ?0
log
e
(1+4?? )
e
3?? ?1
is equal to
(A) 0
(B)
1
12
(C)
4
3
(D) 1
Q.3 Solutions of Laplace?s equation having continuous second-order partial derivatives are called
(A) biharmonic functions
(B) harmonic functions
(C) conjugate harmonic functions
(D) error functions
Q.4 The area (in percentage) under standard normal distribution curve of random variable Z within
limits from ?3 to +3 is __________
Q.5
The root of the function f(x) = x
3
+x ?1 obtained after first iteration on application of Newton-
Raphson scheme using an initial guess of x
0
=1 is
(A) 0.682 (B) 0.686 (C) 0.750 (D) 1.000
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 2/13
Q.6 A force F is acting on a bent bar which is clamped at one end as shown in the figure.
The CORRECT free body diagram is
(A) (B)
(C) (D)
Q.7 The cross-sections of two solid bars made of the same material are shown in the figure. The square
cross-section has flexural (bending) rigidity I
1
, while the circular cross-section has flexural rigidity
I
2
. Both sections have the same cross-sectional area. The ratio I
1
/I
2
is
(A) 1/?? (B) 2/?? (C) ?? /3 (D) ?? /6
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
GATE 2016 General Aptitude - GA Set-3
3/3
Q.10 A wire of length 340 mm is to be cut into two parts. One of the parts is to be made into a square and
the other into a rectangle where sides are in the ratio of 1:2. What is the length of the side of the
square (in mm) such that the combined area of the square and the rectangle is a MINIMUM?
(A) 30 (B) 40 (C) 120 (D) 180
END OF THE QUESTION PAPER
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 A real square matrix A is called skew-symmetric if
(A) A
T
= A
(B) A
T
= A
-1
(C) A
T
= ?A
(D) A
T
= A+A
-1
Q.2
Lt
?? ?0
log
e
(1+4?? )
e
3?? ?1
is equal to
(A) 0
(B)
1
12
(C)
4
3
(D) 1
Q.3 Solutions of Laplace?s equation having continuous second-order partial derivatives are called
(A) biharmonic functions
(B) harmonic functions
(C) conjugate harmonic functions
(D) error functions
Q.4 The area (in percentage) under standard normal distribution curve of random variable Z within
limits from ?3 to +3 is __________
Q.5
The root of the function f(x) = x
3
+x ?1 obtained after first iteration on application of Newton-
Raphson scheme using an initial guess of x
0
=1 is
(A) 0.682 (B) 0.686 (C) 0.750 (D) 1.000
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 2/13
Q.6 A force F is acting on a bent bar which is clamped at one end as shown in the figure.
The CORRECT free body diagram is
(A) (B)
(C) (D)
Q.7 The cross-sections of two solid bars made of the same material are shown in the figure. The square
cross-section has flexural (bending) rigidity I
1
, while the circular cross-section has flexural rigidity
I
2
. Both sections have the same cross-sectional area. The ratio I
1
/I
2
is
(A) 1/?? (B) 2/?? (C) ?? /3 (D) ?? /6
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 3/13
Q.8 The state of stress at a point on an element is shown in figure (a). The same state of stress is shown
in another coordinate system in figure (b).
The components ( ?
xx
, ?
yy
,?
xy
) are given by
(A) (?? / 2,??? / 2, 0 )
(B) (0 , 0 , ?? )
(C) ( ?? , ??? ,?? / 2 ) (D) (0 , 0 , ?? / 2)
Q.9 A rigid link PQ is undergoing plane motion as shown in the figure (V
P
and V
Q
are non-zero). V
QP
is
the relative velocity of point Q with respect to point P.
Which one of the following is TRUE?
(A) V
QP
has components along and perpendicular to PQ
(B) V
QP
has only one component directed from P to Q
(C) V
QP
has only one component directed from Q to P
(D) V
QP
has only one component perpendicular to PQ
Q.10 The number of degrees of freedom in a planar mechanism having n links and j simple hinge joints
is
(A) 3 ?? ? 3 ? 2??
(B) 3 ?? ? 1 ? 2??
(C) 3?? ? 2??
(D) 2?? ? 3?? + 4
Q.11 The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm.
Assume the acceleration due to gravity g =10 m/s
2
. The natural frequency of this spring-mass
system (in rad/s) is_____________
Q.12 Which of the bearings given below SHOULD NOT be subjected to a thrust load?
(A) Deep groove ball bearing
(B) Angular contact ball bearing
(C) Cylindrical (straight) roller bearing
(D) Single row tapered roller bearing
(a) (b)
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
GATE 2016 General Aptitude - GA Set-3
3/3
Q.10 A wire of length 340 mm is to be cut into two parts. One of the parts is to be made into a square and
the other into a rectangle where sides are in the ratio of 1:2. What is the length of the side of the
square (in mm) such that the combined area of the square and the rectangle is a MINIMUM?
(A) 30 (B) 40 (C) 120 (D) 180
END OF THE QUESTION PAPER
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 A real square matrix A is called skew-symmetric if
(A) A
T
= A
(B) A
T
= A
-1
(C) A
T
= ?A
(D) A
T
= A+A
-1
Q.2
Lt
?? ?0
log
e
(1+4?? )
e
3?? ?1
is equal to
(A) 0
(B)
1
12
(C)
4
3
(D) 1
Q.3 Solutions of Laplace?s equation having continuous second-order partial derivatives are called
(A) biharmonic functions
(B) harmonic functions
(C) conjugate harmonic functions
(D) error functions
Q.4 The area (in percentage) under standard normal distribution curve of random variable Z within
limits from ?3 to +3 is __________
Q.5
The root of the function f(x) = x
3
+x ?1 obtained after first iteration on application of Newton-
Raphson scheme using an initial guess of x
0
=1 is
(A) 0.682 (B) 0.686 (C) 0.750 (D) 1.000
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 2/13
Q.6 A force F is acting on a bent bar which is clamped at one end as shown in the figure.
The CORRECT free body diagram is
(A) (B)
(C) (D)
Q.7 The cross-sections of two solid bars made of the same material are shown in the figure. The square
cross-section has flexural (bending) rigidity I
1
, while the circular cross-section has flexural rigidity
I
2
. Both sections have the same cross-sectional area. The ratio I
1
/I
2
is
(A) 1/?? (B) 2/?? (C) ?? /3 (D) ?? /6
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 3/13
Q.8 The state of stress at a point on an element is shown in figure (a). The same state of stress is shown
in another coordinate system in figure (b).
The components ( ?
xx
, ?
yy
,?
xy
) are given by
(A) (?? / 2,??? / 2, 0 )
(B) (0 , 0 , ?? )
(C) ( ?? , ??? ,?? / 2 ) (D) (0 , 0 , ?? / 2)
Q.9 A rigid link PQ is undergoing plane motion as shown in the figure (V
P
and V
Q
are non-zero). V
QP
is
the relative velocity of point Q with respect to point P.
Which one of the following is TRUE?
(A) V
QP
has components along and perpendicular to PQ
(B) V
QP
has only one component directed from P to Q
(C) V
QP
has only one component directed from Q to P
(D) V
QP
has only one component perpendicular to PQ
Q.10 The number of degrees of freedom in a planar mechanism having n links and j simple hinge joints
is
(A) 3 ?? ? 3 ? 2??
(B) 3 ?? ? 1 ? 2??
(C) 3?? ? 2??
(D) 2?? ? 3?? + 4
Q.11 The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm.
Assume the acceleration due to gravity g =10 m/s
2
. The natural frequency of this spring-mass
system (in rad/s) is_____________
Q.12 Which of the bearings given below SHOULD NOT be subjected to a thrust load?
(A) Deep groove ball bearing
(B) Angular contact ball bearing
(C) Cylindrical (straight) roller bearing
(D) Single row tapered roller bearing
(a) (b)
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 4/13
Q.13 A channel of width 450 mm branches into two sub-channels having width 300 mm and 200 mm as
shown in figure. If the volumetric flow rate (taking unit depth) of an incompressible flow through
the main channel is 0.9 m
3
/s and the velocity in the sub-channel of width 200 mm is 3 m/s, the
velocity in the sub-channel of width 300 mm is _____________ m/s.
Assume both inlet and outlet to be at the same elevation.
Q.14 For a certain two-dimensional incompressible flow, velocity field is given by 2?? ?? ?? ? ?? 2
?? . The
streamlines for this flow are given by the family of curves
(A) ?? 2
?? 2
= constant (B) ?? ?? 2
= constant
(C) 2?? ?? ? ?? 2
= constant (D) ?? ?? = constant
Q.15 Steady one-dimensional heat conduction takes place across the faces 1 and 3 of a composite slab
consisting of slabs A and B in perfect contact as shown in the figure, where k
?? , k
?? denote the
respective thermal conductivities. Using the data as given in the figure, the interface temperature
T
2
(in ?C) is __________
Q.16 Grashof number signifies the ratio of
(A) inertia force to viscous force
(B) buoyancy force to viscous force
(C) buoyancy force to inertia force
(D) inertia force to surface tension force
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
GATE 2016 General Aptitude - GA Set-3
3/3
Q.10 A wire of length 340 mm is to be cut into two parts. One of the parts is to be made into a square and
the other into a rectangle where sides are in the ratio of 1:2. What is the length of the side of the
square (in mm) such that the combined area of the square and the rectangle is a MINIMUM?
(A) 30 (B) 40 (C) 120 (D) 180
END OF THE QUESTION PAPER
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 A real square matrix A is called skew-symmetric if
(A) A
T
= A
(B) A
T
= A
-1
(C) A
T
= ?A
(D) A
T
= A+A
-1
Q.2
Lt
?? ?0
log
e
(1+4?? )
e
3?? ?1
is equal to
(A) 0
(B)
1
12
(C)
4
3
(D) 1
Q.3 Solutions of Laplace?s equation having continuous second-order partial derivatives are called
(A) biharmonic functions
(B) harmonic functions
(C) conjugate harmonic functions
(D) error functions
Q.4 The area (in percentage) under standard normal distribution curve of random variable Z within
limits from ?3 to +3 is __________
Q.5
The root of the function f(x) = x
3
+x ?1 obtained after first iteration on application of Newton-
Raphson scheme using an initial guess of x
0
=1 is
(A) 0.682 (B) 0.686 (C) 0.750 (D) 1.000
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 2/13
Q.6 A force F is acting on a bent bar which is clamped at one end as shown in the figure.
The CORRECT free body diagram is
(A) (B)
(C) (D)
Q.7 The cross-sections of two solid bars made of the same material are shown in the figure. The square
cross-section has flexural (bending) rigidity I
1
, while the circular cross-section has flexural rigidity
I
2
. Both sections have the same cross-sectional area. The ratio I
1
/I
2
is
(A) 1/?? (B) 2/?? (C) ?? /3 (D) ?? /6
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 3/13
Q.8 The state of stress at a point on an element is shown in figure (a). The same state of stress is shown
in another coordinate system in figure (b).
The components ( ?
xx
, ?
yy
,?
xy
) are given by
(A) (?? / 2,??? / 2, 0 )
(B) (0 , 0 , ?? )
(C) ( ?? , ??? ,?? / 2 ) (D) (0 , 0 , ?? / 2)
Q.9 A rigid link PQ is undergoing plane motion as shown in the figure (V
P
and V
Q
are non-zero). V
QP
is
the relative velocity of point Q with respect to point P.
Which one of the following is TRUE?
(A) V
QP
has components along and perpendicular to PQ
(B) V
QP
has only one component directed from P to Q
(C) V
QP
has only one component directed from Q to P
(D) V
QP
has only one component perpendicular to PQ
Q.10 The number of degrees of freedom in a planar mechanism having n links and j simple hinge joints
is
(A) 3 ?? ? 3 ? 2??
(B) 3 ?? ? 1 ? 2??
(C) 3?? ? 2??
(D) 2?? ? 3?? + 4
Q.11 The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm.
Assume the acceleration due to gravity g =10 m/s
2
. The natural frequency of this spring-mass
system (in rad/s) is_____________
Q.12 Which of the bearings given below SHOULD NOT be subjected to a thrust load?
(A) Deep groove ball bearing
(B) Angular contact ball bearing
(C) Cylindrical (straight) roller bearing
(D) Single row tapered roller bearing
(a) (b)
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 4/13
Q.13 A channel of width 450 mm branches into two sub-channels having width 300 mm and 200 mm as
shown in figure. If the volumetric flow rate (taking unit depth) of an incompressible flow through
the main channel is 0.9 m
3
/s and the velocity in the sub-channel of width 200 mm is 3 m/s, the
velocity in the sub-channel of width 300 mm is _____________ m/s.
Assume both inlet and outlet to be at the same elevation.
Q.14 For a certain two-dimensional incompressible flow, velocity field is given by 2?? ?? ?? ? ?? 2
?? . The
streamlines for this flow are given by the family of curves
(A) ?? 2
?? 2
= constant (B) ?? ?? 2
= constant
(C) 2?? ?? ? ?? 2
= constant (D) ?? ?? = constant
Q.15 Steady one-dimensional heat conduction takes place across the faces 1 and 3 of a composite slab
consisting of slabs A and B in perfect contact as shown in the figure, where k
?? , k
?? denote the
respective thermal conductivities. Using the data as given in the figure, the interface temperature
T
2
(in ?C) is __________
Q.16 Grashof number signifies the ratio of
(A) inertia force to viscous force
(B) buoyancy force to viscous force
(C) buoyancy force to inertia force
(D) inertia force to surface tension force
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 5/13
Q.17 The INCORRECT statement about the characteristics of critical point of a pure substance is that
(A) there is no constant temperature vaporization process
(B) it has point of inflection with zero slope
(C) the ice directly converts from solid phase to vapor phase
(D) saturated liquid and saturated vapor states are identical
Q.18 For a heat exchanger, ?T
max
is the maximum temperature difference and ?T
min
is the minimum
temperature difference between the two fluids. LMTD is the log mean temperature difference. C
min
and C
max
are the minimum and the maximum heat capacity rates. The maximum possible heat
transfer (Q
max
) between the two fluids is
(A) C
min
LMTD (B) C
min
?T
max
(C) C
max
?T
max
(D) C
max
?T
min
Q.19 The blade and fluid velocities for an axial turbine are as shown in the figure.
The magnitude of absolute velocity at entry is 300 m/s at an angle of 65 ? to the axial direction,
while the magnitude of the absolute velocity at exit is 150 m/s. The exit velocity vector has a
component in the downward direction. Given that the axial (horizontal) velocity is the same at entry
and exit, the specific work (in kJ/kg) is__________
Q.20 Engineering strain of a mild steel sample is recorded as 0.100%. The true strain is
(A) 0.010% (B) 0.055% (C) 0.099% (D) 0.101%
Q.21 Equal amounts of a liquid metal at the same temperature are poured into three moulds made of
steel, copper and aluminum. The shape of the cavity is a cylinder with 15 mm diameter. The size of
the moulds are such that the outside temperature of the moulds do not increase appreciably beyond
the atmospheric temperature during solidification. The sequence of solidification in the mould
from the fastest to slowest is
(Thermal conductivities of steel, copper and aluminum are 60.5, 401 and 237 W/m-K, respectively.
Specific heats of steel, copper and aluminum are 434, 385 and 903 J/kg-K, respectively.
Densities of steel, copper and aluminum are 7854, 8933 and 2700 kg/m
3
, respectively.)
(A) Copper - Steel - Aluminum
(B) Aluminum - Steel - Copper
(C) Copper - Aluminum - Steel
(D) Steel - Copper - Aluminum
150 m/s
300 m/s 150 m/s
65?
Blade speed
Entry
Exit
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
GATE 2016 General Aptitude - GA Set-3
3/3
Q.10 A wire of length 340 mm is to be cut into two parts. One of the parts is to be made into a square and
the other into a rectangle where sides are in the ratio of 1:2. What is the length of the side of the
square (in mm) such that the combined area of the square and the rectangle is a MINIMUM?
(A) 30 (B) 40 (C) 120 (D) 180
END OF THE QUESTION PAPER
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 A real square matrix A is called skew-symmetric if
(A) A
T
= A
(B) A
T
= A
-1
(C) A
T
= ?A
(D) A
T
= A+A
-1
Q.2
Lt
?? ?0
log
e
(1+4?? )
e
3?? ?1
is equal to
(A) 0
(B)
1
12
(C)
4
3
(D) 1
Q.3 Solutions of Laplace?s equation having continuous second-order partial derivatives are called
(A) biharmonic functions
(B) harmonic functions
(C) conjugate harmonic functions
(D) error functions
Q.4 The area (in percentage) under standard normal distribution curve of random variable Z within
limits from ?3 to +3 is __________
Q.5
The root of the function f(x) = x
3
+x ?1 obtained after first iteration on application of Newton-
Raphson scheme using an initial guess of x
0
=1 is
(A) 0.682 (B) 0.686 (C) 0.750 (D) 1.000
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 2/13
Q.6 A force F is acting on a bent bar which is clamped at one end as shown in the figure.
The CORRECT free body diagram is
(A) (B)
(C) (D)
Q.7 The cross-sections of two solid bars made of the same material are shown in the figure. The square
cross-section has flexural (bending) rigidity I
1
, while the circular cross-section has flexural rigidity
I
2
. Both sections have the same cross-sectional area. The ratio I
1
/I
2
is
(A) 1/?? (B) 2/?? (C) ?? /3 (D) ?? /6
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 3/13
Q.8 The state of stress at a point on an element is shown in figure (a). The same state of stress is shown
in another coordinate system in figure (b).
The components ( ?
xx
, ?
yy
,?
xy
) are given by
(A) (?? / 2,??? / 2, 0 )
(B) (0 , 0 , ?? )
(C) ( ?? , ??? ,?? / 2 ) (D) (0 , 0 , ?? / 2)
Q.9 A rigid link PQ is undergoing plane motion as shown in the figure (V
P
and V
Q
are non-zero). V
QP
is
the relative velocity of point Q with respect to point P.
Which one of the following is TRUE?
(A) V
QP
has components along and perpendicular to PQ
(B) V
QP
has only one component directed from P to Q
(C) V
QP
has only one component directed from Q to P
(D) V
QP
has only one component perpendicular to PQ
Q.10 The number of degrees of freedom in a planar mechanism having n links and j simple hinge joints
is
(A) 3 ?? ? 3 ? 2??
(B) 3 ?? ? 1 ? 2??
(C) 3?? ? 2??
(D) 2?? ? 3?? + 4
Q.11 The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm.
Assume the acceleration due to gravity g =10 m/s
2
. The natural frequency of this spring-mass
system (in rad/s) is_____________
Q.12 Which of the bearings given below SHOULD NOT be subjected to a thrust load?
(A) Deep groove ball bearing
(B) Angular contact ball bearing
(C) Cylindrical (straight) roller bearing
(D) Single row tapered roller bearing
(a) (b)
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 4/13
Q.13 A channel of width 450 mm branches into two sub-channels having width 300 mm and 200 mm as
shown in figure. If the volumetric flow rate (taking unit depth) of an incompressible flow through
the main channel is 0.9 m
3
/s and the velocity in the sub-channel of width 200 mm is 3 m/s, the
velocity in the sub-channel of width 300 mm is _____________ m/s.
Assume both inlet and outlet to be at the same elevation.
Q.14 For a certain two-dimensional incompressible flow, velocity field is given by 2?? ?? ?? ? ?? 2
?? . The
streamlines for this flow are given by the family of curves
(A) ?? 2
?? 2
= constant (B) ?? ?? 2
= constant
(C) 2?? ?? ? ?? 2
= constant (D) ?? ?? = constant
Q.15 Steady one-dimensional heat conduction takes place across the faces 1 and 3 of a composite slab
consisting of slabs A and B in perfect contact as shown in the figure, where k
?? , k
?? denote the
respective thermal conductivities. Using the data as given in the figure, the interface temperature
T
2
(in ?C) is __________
Q.16 Grashof number signifies the ratio of
(A) inertia force to viscous force
(B) buoyancy force to viscous force
(C) buoyancy force to inertia force
(D) inertia force to surface tension force
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 5/13
Q.17 The INCORRECT statement about the characteristics of critical point of a pure substance is that
(A) there is no constant temperature vaporization process
(B) it has point of inflection with zero slope
(C) the ice directly converts from solid phase to vapor phase
(D) saturated liquid and saturated vapor states are identical
Q.18 For a heat exchanger, ?T
max
is the maximum temperature difference and ?T
min
is the minimum
temperature difference between the two fluids. LMTD is the log mean temperature difference. C
min
and C
max
are the minimum and the maximum heat capacity rates. The maximum possible heat
transfer (Q
max
) between the two fluids is
(A) C
min
LMTD (B) C
min
?T
max
(C) C
max
?T
max
(D) C
max
?T
min
Q.19 The blade and fluid velocities for an axial turbine are as shown in the figure.
The magnitude of absolute velocity at entry is 300 m/s at an angle of 65 ? to the axial direction,
while the magnitude of the absolute velocity at exit is 150 m/s. The exit velocity vector has a
component in the downward direction. Given that the axial (horizontal) velocity is the same at entry
and exit, the specific work (in kJ/kg) is__________
Q.20 Engineering strain of a mild steel sample is recorded as 0.100%. The true strain is
(A) 0.010% (B) 0.055% (C) 0.099% (D) 0.101%
Q.21 Equal amounts of a liquid metal at the same temperature are poured into three moulds made of
steel, copper and aluminum. The shape of the cavity is a cylinder with 15 mm diameter. The size of
the moulds are such that the outside temperature of the moulds do not increase appreciably beyond
the atmospheric temperature during solidification. The sequence of solidification in the mould
from the fastest to slowest is
(Thermal conductivities of steel, copper and aluminum are 60.5, 401 and 237 W/m-K, respectively.
Specific heats of steel, copper and aluminum are 434, 385 and 903 J/kg-K, respectively.
Densities of steel, copper and aluminum are 7854, 8933 and 2700 kg/m
3
, respectively.)
(A) Copper - Steel - Aluminum
(B) Aluminum - Steel - Copper
(C) Copper - Aluminum - Steel
(D) Steel - Copper - Aluminum
150 m/s
300 m/s 150 m/s
65?
Blade speed
Entry
Exit
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 6/13
Q.22 In a wire-cut EDM process the necessary conditions that have to be met for making a successful cut
are that
(A) wire and sample are electrically non-conducting
(B) wire and sample are electrically conducting
(C) wire is electrically conducting and sample is electrically non-conducting
(D) sample is electrically conducting and wire is electrically non-conducting
Q.23 Internal gears are manufactured by
(A) hobbing
(B) shaping with pinion cutter
(C) shaping with rack cutter
(D) milling
Q.24 Match the following part programming codes with their respective functions
Part Programming Codes Functions
P. G01 I. Spindle stop
Q. G03 II. Spindle rotation, clockwise
R. M03 III. Circular interpolation, anticlockwise
S. M05 IV. Linear interpolation
(A) P ? II, Q ? I, R ? IV, S ? III (B) P ? IV, Q ? II, R ? III, S ? I
(C) P ? IV, Q ? III, R ? II, S ? I (D) P ? III, Q ? IV, R ? II, S ? I
Q.25 In PERT chart, the activity time distribution is
(A) Normal (B) Binomial (C) Poisson (D) Beta
Q. 26 ? Q. 55 carry two marks each.
Q.26
The number of linearly independent eigenvectors of matrix ?? =
2 1 0
0 2 0
0 0 3
is _________
Q.27
The value of the line integral
?
? ?
C
ds r F , where C is a circle of radius
4
?? units is ________
Here, ??
?? ,?? = ?? ?? + 2?? ?? and ?? ? is the UNIT tangent vector on the curve C at an arc length s
from a reference point on the curve. ?? and ?? are the basis vectors in the x-y Cartesian reference. In
evaluating the line integral, the curve has to be traversed in the counter-clockwise direction.
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
GATE 2016 General Aptitude - GA Set-3
3/3
Q.10 A wire of length 340 mm is to be cut into two parts. One of the parts is to be made into a square and
the other into a rectangle where sides are in the ratio of 1:2. What is the length of the side of the
square (in mm) such that the combined area of the square and the rectangle is a MINIMUM?
(A) 30 (B) 40 (C) 120 (D) 180
END OF THE QUESTION PAPER
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 A real square matrix A is called skew-symmetric if
(A) A
T
= A
(B) A
T
= A
-1
(C) A
T
= ?A
(D) A
T
= A+A
-1
Q.2
Lt
?? ?0
log
e
(1+4?? )
e
3?? ?1
is equal to
(A) 0
(B)
1
12
(C)
4
3
(D) 1
Q.3 Solutions of Laplace?s equation having continuous second-order partial derivatives are called
(A) biharmonic functions
(B) harmonic functions
(C) conjugate harmonic functions
(D) error functions
Q.4 The area (in percentage) under standard normal distribution curve of random variable Z within
limits from ?3 to +3 is __________
Q.5
The root of the function f(x) = x
3
+x ?1 obtained after first iteration on application of Newton-
Raphson scheme using an initial guess of x
0
=1 is
(A) 0.682 (B) 0.686 (C) 0.750 (D) 1.000
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 2/13
Q.6 A force F is acting on a bent bar which is clamped at one end as shown in the figure.
The CORRECT free body diagram is
(A) (B)
(C) (D)
Q.7 The cross-sections of two solid bars made of the same material are shown in the figure. The square
cross-section has flexural (bending) rigidity I
1
, while the circular cross-section has flexural rigidity
I
2
. Both sections have the same cross-sectional area. The ratio I
1
/I
2
is
(A) 1/?? (B) 2/?? (C) ?? /3 (D) ?? /6
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 3/13
Q.8 The state of stress at a point on an element is shown in figure (a). The same state of stress is shown
in another coordinate system in figure (b).
The components ( ?
xx
, ?
yy
,?
xy
) are given by
(A) (?? / 2,??? / 2, 0 )
(B) (0 , 0 , ?? )
(C) ( ?? , ??? ,?? / 2 ) (D) (0 , 0 , ?? / 2)
Q.9 A rigid link PQ is undergoing plane motion as shown in the figure (V
P
and V
Q
are non-zero). V
QP
is
the relative velocity of point Q with respect to point P.
Which one of the following is TRUE?
(A) V
QP
has components along and perpendicular to PQ
(B) V
QP
has only one component directed from P to Q
(C) V
QP
has only one component directed from Q to P
(D) V
QP
has only one component perpendicular to PQ
Q.10 The number of degrees of freedom in a planar mechanism having n links and j simple hinge joints
is
(A) 3 ?? ? 3 ? 2??
(B) 3 ?? ? 1 ? 2??
(C) 3?? ? 2??
(D) 2?? ? 3?? + 4
Q.11 The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm.
Assume the acceleration due to gravity g =10 m/s
2
. The natural frequency of this spring-mass
system (in rad/s) is_____________
Q.12 Which of the bearings given below SHOULD NOT be subjected to a thrust load?
(A) Deep groove ball bearing
(B) Angular contact ball bearing
(C) Cylindrical (straight) roller bearing
(D) Single row tapered roller bearing
(a) (b)
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 4/13
Q.13 A channel of width 450 mm branches into two sub-channels having width 300 mm and 200 mm as
shown in figure. If the volumetric flow rate (taking unit depth) of an incompressible flow through
the main channel is 0.9 m
3
/s and the velocity in the sub-channel of width 200 mm is 3 m/s, the
velocity in the sub-channel of width 300 mm is _____________ m/s.
Assume both inlet and outlet to be at the same elevation.
Q.14 For a certain two-dimensional incompressible flow, velocity field is given by 2?? ?? ?? ? ?? 2
?? . The
streamlines for this flow are given by the family of curves
(A) ?? 2
?? 2
= constant (B) ?? ?? 2
= constant
(C) 2?? ?? ? ?? 2
= constant (D) ?? ?? = constant
Q.15 Steady one-dimensional heat conduction takes place across the faces 1 and 3 of a composite slab
consisting of slabs A and B in perfect contact as shown in the figure, where k
?? , k
?? denote the
respective thermal conductivities. Using the data as given in the figure, the interface temperature
T
2
(in ?C) is __________
Q.16 Grashof number signifies the ratio of
(A) inertia force to viscous force
(B) buoyancy force to viscous force
(C) buoyancy force to inertia force
(D) inertia force to surface tension force
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 5/13
Q.17 The INCORRECT statement about the characteristics of critical point of a pure substance is that
(A) there is no constant temperature vaporization process
(B) it has point of inflection with zero slope
(C) the ice directly converts from solid phase to vapor phase
(D) saturated liquid and saturated vapor states are identical
Q.18 For a heat exchanger, ?T
max
is the maximum temperature difference and ?T
min
is the minimum
temperature difference between the two fluids. LMTD is the log mean temperature difference. C
min
and C
max
are the minimum and the maximum heat capacity rates. The maximum possible heat
transfer (Q
max
) between the two fluids is
(A) C
min
LMTD (B) C
min
?T
max
(C) C
max
?T
max
(D) C
max
?T
min
Q.19 The blade and fluid velocities for an axial turbine are as shown in the figure.
The magnitude of absolute velocity at entry is 300 m/s at an angle of 65 ? to the axial direction,
while the magnitude of the absolute velocity at exit is 150 m/s. The exit velocity vector has a
component in the downward direction. Given that the axial (horizontal) velocity is the same at entry
and exit, the specific work (in kJ/kg) is__________
Q.20 Engineering strain of a mild steel sample is recorded as 0.100%. The true strain is
(A) 0.010% (B) 0.055% (C) 0.099% (D) 0.101%
Q.21 Equal amounts of a liquid metal at the same temperature are poured into three moulds made of
steel, copper and aluminum. The shape of the cavity is a cylinder with 15 mm diameter. The size of
the moulds are such that the outside temperature of the moulds do not increase appreciably beyond
the atmospheric temperature during solidification. The sequence of solidification in the mould
from the fastest to slowest is
(Thermal conductivities of steel, copper and aluminum are 60.5, 401 and 237 W/m-K, respectively.
Specific heats of steel, copper and aluminum are 434, 385 and 903 J/kg-K, respectively.
Densities of steel, copper and aluminum are 7854, 8933 and 2700 kg/m
3
, respectively.)
(A) Copper - Steel - Aluminum
(B) Aluminum - Steel - Copper
(C) Copper - Aluminum - Steel
(D) Steel - Copper - Aluminum
150 m/s
300 m/s 150 m/s
65?
Blade speed
Entry
Exit
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 6/13
Q.22 In a wire-cut EDM process the necessary conditions that have to be met for making a successful cut
are that
(A) wire and sample are electrically non-conducting
(B) wire and sample are electrically conducting
(C) wire is electrically conducting and sample is electrically non-conducting
(D) sample is electrically conducting and wire is electrically non-conducting
Q.23 Internal gears are manufactured by
(A) hobbing
(B) shaping with pinion cutter
(C) shaping with rack cutter
(D) milling
Q.24 Match the following part programming codes with their respective functions
Part Programming Codes Functions
P. G01 I. Spindle stop
Q. G03 II. Spindle rotation, clockwise
R. M03 III. Circular interpolation, anticlockwise
S. M05 IV. Linear interpolation
(A) P ? II, Q ? I, R ? IV, S ? III (B) P ? IV, Q ? II, R ? III, S ? I
(C) P ? IV, Q ? III, R ? II, S ? I (D) P ? III, Q ? IV, R ? II, S ? I
Q.25 In PERT chart, the activity time distribution is
(A) Normal (B) Binomial (C) Poisson (D) Beta
Q. 26 ? Q. 55 carry two marks each.
Q.26
The number of linearly independent eigenvectors of matrix ?? =
2 1 0
0 2 0
0 0 3
is _________
Q.27
The value of the line integral
?
? ?
C
ds r F , where C is a circle of radius
4
?? units is ________
Here, ??
?? ,?? = ?? ?? + 2?? ?? and ?? ? is the UNIT tangent vector on the curve C at an arc length s
from a reference point on the curve. ?? and ?? are the basis vectors in the x-y Cartesian reference. In
evaluating the line integral, the curve has to be traversed in the counter-clockwise direction.
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 7/13
Q.28
lim
?? ??
?? 2
+ ?? ? 1 ? ?? is
(A) 0 (B) ? (C) 1/2 (D) ??
Q.29 Three cards were drawn from a pack of 52 cards. The probability that they are a king, a queen, and
a jack is
(A)
16
5525
(B)
64
2197
(C)
3
13
(D)
8
16575
Q.30 An inextensible massless string goes over a frictionless pulley. Two weights of 100 N and 200 N
are attached to the two ends of the string. The weights are released from rest, and start moving due
to gravity. The tension in the string (in N) is __________
Q.31 A circular disc of radius 100 mm and mass 1 kg, initially at rest at position A, rolls without
slipping down a curved path as shown in figure. The speed v of the disc when it reaches position B
is _________ m/s.
Acceleration due to gravity g = 10 m/s
2
.
200 N
100 N
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
GATE 2016 General Aptitude - GA Set-3
3/3
Q.10 A wire of length 340 mm is to be cut into two parts. One of the parts is to be made into a square and
the other into a rectangle where sides are in the ratio of 1:2. What is the length of the side of the
square (in mm) such that the combined area of the square and the rectangle is a MINIMUM?
(A) 30 (B) 40 (C) 120 (D) 180
END OF THE QUESTION PAPER
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 A real square matrix A is called skew-symmetric if
(A) A
T
= A
(B) A
T
= A
-1
(C) A
T
= ?A
(D) A
T
= A+A
-1
Q.2
Lt
?? ?0
log
e
(1+4?? )
e
3?? ?1
is equal to
(A) 0
(B)
1
12
(C)
4
3
(D) 1
Q.3 Solutions of Laplace?s equation having continuous second-order partial derivatives are called
(A) biharmonic functions
(B) harmonic functions
(C) conjugate harmonic functions
(D) error functions
Q.4 The area (in percentage) under standard normal distribution curve of random variable Z within
limits from ?3 to +3 is __________
Q.5
The root of the function f(x) = x
3
+x ?1 obtained after first iteration on application of Newton-
Raphson scheme using an initial guess of x
0
=1 is
(A) 0.682 (B) 0.686 (C) 0.750 (D) 1.000
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 2/13
Q.6 A force F is acting on a bent bar which is clamped at one end as shown in the figure.
The CORRECT free body diagram is
(A) (B)
(C) (D)
Q.7 The cross-sections of two solid bars made of the same material are shown in the figure. The square
cross-section has flexural (bending) rigidity I
1
, while the circular cross-section has flexural rigidity
I
2
. Both sections have the same cross-sectional area. The ratio I
1
/I
2
is
(A) 1/?? (B) 2/?? (C) ?? /3 (D) ?? /6
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 3/13
Q.8 The state of stress at a point on an element is shown in figure (a). The same state of stress is shown
in another coordinate system in figure (b).
The components ( ?
xx
, ?
yy
,?
xy
) are given by
(A) (?? / 2,??? / 2, 0 )
(B) (0 , 0 , ?? )
(C) ( ?? , ??? ,?? / 2 ) (D) (0 , 0 , ?? / 2)
Q.9 A rigid link PQ is undergoing plane motion as shown in the figure (V
P
and V
Q
are non-zero). V
QP
is
the relative velocity of point Q with respect to point P.
Which one of the following is TRUE?
(A) V
QP
has components along and perpendicular to PQ
(B) V
QP
has only one component directed from P to Q
(C) V
QP
has only one component directed from Q to P
(D) V
QP
has only one component perpendicular to PQ
Q.10 The number of degrees of freedom in a planar mechanism having n links and j simple hinge joints
is
(A) 3 ?? ? 3 ? 2??
(B) 3 ?? ? 1 ? 2??
(C) 3?? ? 2??
(D) 2?? ? 3?? + 4
Q.11 The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm.
Assume the acceleration due to gravity g =10 m/s
2
. The natural frequency of this spring-mass
system (in rad/s) is_____________
Q.12 Which of the bearings given below SHOULD NOT be subjected to a thrust load?
(A) Deep groove ball bearing
(B) Angular contact ball bearing
(C) Cylindrical (straight) roller bearing
(D) Single row tapered roller bearing
(a) (b)
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 4/13
Q.13 A channel of width 450 mm branches into two sub-channels having width 300 mm and 200 mm as
shown in figure. If the volumetric flow rate (taking unit depth) of an incompressible flow through
the main channel is 0.9 m
3
/s and the velocity in the sub-channel of width 200 mm is 3 m/s, the
velocity in the sub-channel of width 300 mm is _____________ m/s.
Assume both inlet and outlet to be at the same elevation.
Q.14 For a certain two-dimensional incompressible flow, velocity field is given by 2?? ?? ?? ? ?? 2
?? . The
streamlines for this flow are given by the family of curves
(A) ?? 2
?? 2
= constant (B) ?? ?? 2
= constant
(C) 2?? ?? ? ?? 2
= constant (D) ?? ?? = constant
Q.15 Steady one-dimensional heat conduction takes place across the faces 1 and 3 of a composite slab
consisting of slabs A and B in perfect contact as shown in the figure, where k
?? , k
?? denote the
respective thermal conductivities. Using the data as given in the figure, the interface temperature
T
2
(in ?C) is __________
Q.16 Grashof number signifies the ratio of
(A) inertia force to viscous force
(B) buoyancy force to viscous force
(C) buoyancy force to inertia force
(D) inertia force to surface tension force
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 5/13
Q.17 The INCORRECT statement about the characteristics of critical point of a pure substance is that
(A) there is no constant temperature vaporization process
(B) it has point of inflection with zero slope
(C) the ice directly converts from solid phase to vapor phase
(D) saturated liquid and saturated vapor states are identical
Q.18 For a heat exchanger, ?T
max
is the maximum temperature difference and ?T
min
is the minimum
temperature difference between the two fluids. LMTD is the log mean temperature difference. C
min
and C
max
are the minimum and the maximum heat capacity rates. The maximum possible heat
transfer (Q
max
) between the two fluids is
(A) C
min
LMTD (B) C
min
?T
max
(C) C
max
?T
max
(D) C
max
?T
min
Q.19 The blade and fluid velocities for an axial turbine are as shown in the figure.
The magnitude of absolute velocity at entry is 300 m/s at an angle of 65 ? to the axial direction,
while the magnitude of the absolute velocity at exit is 150 m/s. The exit velocity vector has a
component in the downward direction. Given that the axial (horizontal) velocity is the same at entry
and exit, the specific work (in kJ/kg) is__________
Q.20 Engineering strain of a mild steel sample is recorded as 0.100%. The true strain is
(A) 0.010% (B) 0.055% (C) 0.099% (D) 0.101%
Q.21 Equal amounts of a liquid metal at the same temperature are poured into three moulds made of
steel, copper and aluminum. The shape of the cavity is a cylinder with 15 mm diameter. The size of
the moulds are such that the outside temperature of the moulds do not increase appreciably beyond
the atmospheric temperature during solidification. The sequence of solidification in the mould
from the fastest to slowest is
(Thermal conductivities of steel, copper and aluminum are 60.5, 401 and 237 W/m-K, respectively.
Specific heats of steel, copper and aluminum are 434, 385 and 903 J/kg-K, respectively.
Densities of steel, copper and aluminum are 7854, 8933 and 2700 kg/m
3
, respectively.)
(A) Copper - Steel - Aluminum
(B) Aluminum - Steel - Copper
(C) Copper - Aluminum - Steel
(D) Steel - Copper - Aluminum
150 m/s
300 m/s 150 m/s
65?
Blade speed
Entry
Exit
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 6/13
Q.22 In a wire-cut EDM process the necessary conditions that have to be met for making a successful cut
are that
(A) wire and sample are electrically non-conducting
(B) wire and sample are electrically conducting
(C) wire is electrically conducting and sample is electrically non-conducting
(D) sample is electrically conducting and wire is electrically non-conducting
Q.23 Internal gears are manufactured by
(A) hobbing
(B) shaping with pinion cutter
(C) shaping with rack cutter
(D) milling
Q.24 Match the following part programming codes with their respective functions
Part Programming Codes Functions
P. G01 I. Spindle stop
Q. G03 II. Spindle rotation, clockwise
R. M03 III. Circular interpolation, anticlockwise
S. M05 IV. Linear interpolation
(A) P ? II, Q ? I, R ? IV, S ? III (B) P ? IV, Q ? II, R ? III, S ? I
(C) P ? IV, Q ? III, R ? II, S ? I (D) P ? III, Q ? IV, R ? II, S ? I
Q.25 In PERT chart, the activity time distribution is
(A) Normal (B) Binomial (C) Poisson (D) Beta
Q. 26 ? Q. 55 carry two marks each.
Q.26
The number of linearly independent eigenvectors of matrix ?? =
2 1 0
0 2 0
0 0 3
is _________
Q.27
The value of the line integral
?
? ?
C
ds r F , where C is a circle of radius
4
?? units is ________
Here, ??
?? ,?? = ?? ?? + 2?? ?? and ?? ? is the UNIT tangent vector on the curve C at an arc length s
from a reference point on the curve. ?? and ?? are the basis vectors in the x-y Cartesian reference. In
evaluating the line integral, the curve has to be traversed in the counter-clockwise direction.
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 7/13
Q.28
lim
?? ??
?? 2
+ ?? ? 1 ? ?? is
(A) 0 (B) ? (C) 1/2 (D) ??
Q.29 Three cards were drawn from a pack of 52 cards. The probability that they are a king, a queen, and
a jack is
(A)
16
5525
(B)
64
2197
(C)
3
13
(D)
8
16575
Q.30 An inextensible massless string goes over a frictionless pulley. Two weights of 100 N and 200 N
are attached to the two ends of the string. The weights are released from rest, and start moving due
to gravity. The tension in the string (in N) is __________
Q.31 A circular disc of radius 100 mm and mass 1 kg, initially at rest at position A, rolls without
slipping down a curved path as shown in figure. The speed v of the disc when it reaches position B
is _________ m/s.
Acceleration due to gravity g = 10 m/s
2
.
200 N
100 N
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 8/13
Q.32
A rigid rod (AB) of length ?? = 2 m is undergoing translational as well as rotational motion in the
x-y plane (see the figure). The point A has the velocity ?? 1
= ?? + 2?? m/s. The end B is constrained to
move only along the x direction.
The magnitude of the velocity V
2
(in m/s) at the end B is __________
Q.33 A square plate of dimension L ? L is subjected to a uniform pressure load p = 250 MPa on its
edges as shown in the figure. Assume plane stress conditions. The Young?s modulus E = 200 GPa.
The deformed shape is a square of dimension ?? ? 2 ?? . If ?? = 2 m and ?? = 0.001 m, the Poisson?s
ratio of the plate material is __________
Q.34 Two circular shafts made of same material, one solid (S) and one hollow (H), have the same length
and polar moment of inertia. Both are subjected to same torque. Here, ?
S
is the twist and ?
S
is the
maximum shear stress in the solid shaft, whereas ?
H
is the twist and ?
H
is the maximum shear stress
in the hollow shaft. Which one of the following is TRUE?
(A) ?
S
= ?
H
and ?
S
= ?
H
(B) ??
S
> ?
H
and ?
S
> ?
H
(C) ??
S
< ?
H
and ?
S
< ?
H
(D) ??
S
= ?
H
and ?
S
< ?
H
A
B
V
1
V
2
??=? 45 ?
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
GATE 2016 General Aptitude - GA Set-3
3/3
Q.10 A wire of length 340 mm is to be cut into two parts. One of the parts is to be made into a square and
the other into a rectangle where sides are in the ratio of 1:2. What is the length of the side of the
square (in mm) such that the combined area of the square and the rectangle is a MINIMUM?
(A) 30 (B) 40 (C) 120 (D) 180
END OF THE QUESTION PAPER
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 A real square matrix A is called skew-symmetric if
(A) A
T
= A
(B) A
T
= A
-1
(C) A
T
= ?A
(D) A
T
= A+A
-1
Q.2
Lt
?? ?0
log
e
(1+4?? )
e
3?? ?1
is equal to
(A) 0
(B)
1
12
(C)
4
3
(D) 1
Q.3 Solutions of Laplace?s equation having continuous second-order partial derivatives are called
(A) biharmonic functions
(B) harmonic functions
(C) conjugate harmonic functions
(D) error functions
Q.4 The area (in percentage) under standard normal distribution curve of random variable Z within
limits from ?3 to +3 is __________
Q.5
The root of the function f(x) = x
3
+x ?1 obtained after first iteration on application of Newton-
Raphson scheme using an initial guess of x
0
=1 is
(A) 0.682 (B) 0.686 (C) 0.750 (D) 1.000
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 2/13
Q.6 A force F is acting on a bent bar which is clamped at one end as shown in the figure.
The CORRECT free body diagram is
(A) (B)
(C) (D)
Q.7 The cross-sections of two solid bars made of the same material are shown in the figure. The square
cross-section has flexural (bending) rigidity I
1
, while the circular cross-section has flexural rigidity
I
2
. Both sections have the same cross-sectional area. The ratio I
1
/I
2
is
(A) 1/?? (B) 2/?? (C) ?? /3 (D) ?? /6
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 3/13
Q.8 The state of stress at a point on an element is shown in figure (a). The same state of stress is shown
in another coordinate system in figure (b).
The components ( ?
xx
, ?
yy
,?
xy
) are given by
(A) (?? / 2,??? / 2, 0 )
(B) (0 , 0 , ?? )
(C) ( ?? , ??? ,?? / 2 ) (D) (0 , 0 , ?? / 2)
Q.9 A rigid link PQ is undergoing plane motion as shown in the figure (V
P
and V
Q
are non-zero). V
QP
is
the relative velocity of point Q with respect to point P.
Which one of the following is TRUE?
(A) V
QP
has components along and perpendicular to PQ
(B) V
QP
has only one component directed from P to Q
(C) V
QP
has only one component directed from Q to P
(D) V
QP
has only one component perpendicular to PQ
Q.10 The number of degrees of freedom in a planar mechanism having n links and j simple hinge joints
is
(A) 3 ?? ? 3 ? 2??
(B) 3 ?? ? 1 ? 2??
(C) 3?? ? 2??
(D) 2?? ? 3?? + 4
Q.11 The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm.
Assume the acceleration due to gravity g =10 m/s
2
. The natural frequency of this spring-mass
system (in rad/s) is_____________
Q.12 Which of the bearings given below SHOULD NOT be subjected to a thrust load?
(A) Deep groove ball bearing
(B) Angular contact ball bearing
(C) Cylindrical (straight) roller bearing
(D) Single row tapered roller bearing
(a) (b)
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 4/13
Q.13 A channel of width 450 mm branches into two sub-channels having width 300 mm and 200 mm as
shown in figure. If the volumetric flow rate (taking unit depth) of an incompressible flow through
the main channel is 0.9 m
3
/s and the velocity in the sub-channel of width 200 mm is 3 m/s, the
velocity in the sub-channel of width 300 mm is _____________ m/s.
Assume both inlet and outlet to be at the same elevation.
Q.14 For a certain two-dimensional incompressible flow, velocity field is given by 2?? ?? ?? ? ?? 2
?? . The
streamlines for this flow are given by the family of curves
(A) ?? 2
?? 2
= constant (B) ?? ?? 2
= constant
(C) 2?? ?? ? ?? 2
= constant (D) ?? ?? = constant
Q.15 Steady one-dimensional heat conduction takes place across the faces 1 and 3 of a composite slab
consisting of slabs A and B in perfect contact as shown in the figure, where k
?? , k
?? denote the
respective thermal conductivities. Using the data as given in the figure, the interface temperature
T
2
(in ?C) is __________
Q.16 Grashof number signifies the ratio of
(A) inertia force to viscous force
(B) buoyancy force to viscous force
(C) buoyancy force to inertia force
(D) inertia force to surface tension force
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 5/13
Q.17 The INCORRECT statement about the characteristics of critical point of a pure substance is that
(A) there is no constant temperature vaporization process
(B) it has point of inflection with zero slope
(C) the ice directly converts from solid phase to vapor phase
(D) saturated liquid and saturated vapor states are identical
Q.18 For a heat exchanger, ?T
max
is the maximum temperature difference and ?T
min
is the minimum
temperature difference between the two fluids. LMTD is the log mean temperature difference. C
min
and C
max
are the minimum and the maximum heat capacity rates. The maximum possible heat
transfer (Q
max
) between the two fluids is
(A) C
min
LMTD (B) C
min
?T
max
(C) C
max
?T
max
(D) C
max
?T
min
Q.19 The blade and fluid velocities for an axial turbine are as shown in the figure.
The magnitude of absolute velocity at entry is 300 m/s at an angle of 65 ? to the axial direction,
while the magnitude of the absolute velocity at exit is 150 m/s. The exit velocity vector has a
component in the downward direction. Given that the axial (horizontal) velocity is the same at entry
and exit, the specific work (in kJ/kg) is__________
Q.20 Engineering strain of a mild steel sample is recorded as 0.100%. The true strain is
(A) 0.010% (B) 0.055% (C) 0.099% (D) 0.101%
Q.21 Equal amounts of a liquid metal at the same temperature are poured into three moulds made of
steel, copper and aluminum. The shape of the cavity is a cylinder with 15 mm diameter. The size of
the moulds are such that the outside temperature of the moulds do not increase appreciably beyond
the atmospheric temperature during solidification. The sequence of solidification in the mould
from the fastest to slowest is
(Thermal conductivities of steel, copper and aluminum are 60.5, 401 and 237 W/m-K, respectively.
Specific heats of steel, copper and aluminum are 434, 385 and 903 J/kg-K, respectively.
Densities of steel, copper and aluminum are 7854, 8933 and 2700 kg/m
3
, respectively.)
(A) Copper - Steel - Aluminum
(B) Aluminum - Steel - Copper
(C) Copper - Aluminum - Steel
(D) Steel - Copper - Aluminum
150 m/s
300 m/s 150 m/s
65?
Blade speed
Entry
Exit
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 6/13
Q.22 In a wire-cut EDM process the necessary conditions that have to be met for making a successful cut
are that
(A) wire and sample are electrically non-conducting
(B) wire and sample are electrically conducting
(C) wire is electrically conducting and sample is electrically non-conducting
(D) sample is electrically conducting and wire is electrically non-conducting
Q.23 Internal gears are manufactured by
(A) hobbing
(B) shaping with pinion cutter
(C) shaping with rack cutter
(D) milling
Q.24 Match the following part programming codes with their respective functions
Part Programming Codes Functions
P. G01 I. Spindle stop
Q. G03 II. Spindle rotation, clockwise
R. M03 III. Circular interpolation, anticlockwise
S. M05 IV. Linear interpolation
(A) P ? II, Q ? I, R ? IV, S ? III (B) P ? IV, Q ? II, R ? III, S ? I
(C) P ? IV, Q ? III, R ? II, S ? I (D) P ? III, Q ? IV, R ? II, S ? I
Q.25 In PERT chart, the activity time distribution is
(A) Normal (B) Binomial (C) Poisson (D) Beta
Q. 26 ? Q. 55 carry two marks each.
Q.26
The number of linearly independent eigenvectors of matrix ?? =
2 1 0
0 2 0
0 0 3
is _________
Q.27
The value of the line integral
?
? ?
C
ds r F , where C is a circle of radius
4
?? units is ________
Here, ??
?? ,?? = ?? ?? + 2?? ?? and ?? ? is the UNIT tangent vector on the curve C at an arc length s
from a reference point on the curve. ?? and ?? are the basis vectors in the x-y Cartesian reference. In
evaluating the line integral, the curve has to be traversed in the counter-clockwise direction.
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 7/13
Q.28
lim
?? ??
?? 2
+ ?? ? 1 ? ?? is
(A) 0 (B) ? (C) 1/2 (D) ??
Q.29 Three cards were drawn from a pack of 52 cards. The probability that they are a king, a queen, and
a jack is
(A)
16
5525
(B)
64
2197
(C)
3
13
(D)
8
16575
Q.30 An inextensible massless string goes over a frictionless pulley. Two weights of 100 N and 200 N
are attached to the two ends of the string. The weights are released from rest, and start moving due
to gravity. The tension in the string (in N) is __________
Q.31 A circular disc of radius 100 mm and mass 1 kg, initially at rest at position A, rolls without
slipping down a curved path as shown in figure. The speed v of the disc when it reaches position B
is _________ m/s.
Acceleration due to gravity g = 10 m/s
2
.
200 N
100 N
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 8/13
Q.32
A rigid rod (AB) of length ?? = 2 m is undergoing translational as well as rotational motion in the
x-y plane (see the figure). The point A has the velocity ?? 1
= ?? + 2?? m/s. The end B is constrained to
move only along the x direction.
The magnitude of the velocity V
2
(in m/s) at the end B is __________
Q.33 A square plate of dimension L ? L is subjected to a uniform pressure load p = 250 MPa on its
edges as shown in the figure. Assume plane stress conditions. The Young?s modulus E = 200 GPa.
The deformed shape is a square of dimension ?? ? 2 ?? . If ?? = 2 m and ?? = 0.001 m, the Poisson?s
ratio of the plate material is __________
Q.34 Two circular shafts made of same material, one solid (S) and one hollow (H), have the same length
and polar moment of inertia. Both are subjected to same torque. Here, ?
S
is the twist and ?
S
is the
maximum shear stress in the solid shaft, whereas ?
H
is the twist and ?
H
is the maximum shear stress
in the hollow shaft. Which one of the following is TRUE?
(A) ?
S
= ?
H
and ?
S
= ?
H
(B) ??
S
> ?
H
and ?
S
> ?
H
(C) ??
S
< ?
H
and ?
S
< ?
H
(D) ??
S
= ?
H
and ?
S
< ?
H
A
B
V
1
V
2
??=? 45 ?
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 9/13
Q.35 A beam of length L is carrying a uniformly distributed load w per unit length. The flexural rigidity
of the beam is EI. The reaction at the simple support at the right end is
(A)
?? ?? 2
(B)
3?? ?? 8
(C)
?? ?? 4
(D)
?? ?? 8
Q.36 Two masses m are attached to opposite sides of a rigid rotating shaft in the vertical plane. Another
pair of equal masses m
1
is attached to the opposite sides of the shaft in the vertical plane as shown
in figure. Consider m = 1 kg, e = 50 mm, e
1
= 20 mm, b = 0.3 m, a = 2 m and a
1
= 2.5 m. For the
system to be dynamically balanced, m
1
should be ________ kg.
Q.37 A single degree of freedom spring-mass system is subjected to a harmonic force of constant
amplitude. For an excitation frequency of
3?? ?? , the ratio of the amplitude of steady state
response to the static deflection of the spring is __________
w
L
?? ?? ?? ?? ?? ?? m
k
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
GATE 2016 General Aptitude - GA Set-3
3/3
Q.10 A wire of length 340 mm is to be cut into two parts. One of the parts is to be made into a square and
the other into a rectangle where sides are in the ratio of 1:2. What is the length of the side of the
square (in mm) such that the combined area of the square and the rectangle is a MINIMUM?
(A) 30 (B) 40 (C) 120 (D) 180
END OF THE QUESTION PAPER
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 A real square matrix A is called skew-symmetric if
(A) A
T
= A
(B) A
T
= A
-1
(C) A
T
= ?A
(D) A
T
= A+A
-1
Q.2
Lt
?? ?0
log
e
(1+4?? )
e
3?? ?1
is equal to
(A) 0
(B)
1
12
(C)
4
3
(D) 1
Q.3 Solutions of Laplace?s equation having continuous second-order partial derivatives are called
(A) biharmonic functions
(B) harmonic functions
(C) conjugate harmonic functions
(D) error functions
Q.4 The area (in percentage) under standard normal distribution curve of random variable Z within
limits from ?3 to +3 is __________
Q.5
The root of the function f(x) = x
3
+x ?1 obtained after first iteration on application of Newton-
Raphson scheme using an initial guess of x
0
=1 is
(A) 0.682 (B) 0.686 (C) 0.750 (D) 1.000
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 2/13
Q.6 A force F is acting on a bent bar which is clamped at one end as shown in the figure.
The CORRECT free body diagram is
(A) (B)
(C) (D)
Q.7 The cross-sections of two solid bars made of the same material are shown in the figure. The square
cross-section has flexural (bending) rigidity I
1
, while the circular cross-section has flexural rigidity
I
2
. Both sections have the same cross-sectional area. The ratio I
1
/I
2
is
(A) 1/?? (B) 2/?? (C) ?? /3 (D) ?? /6
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 3/13
Q.8 The state of stress at a point on an element is shown in figure (a). The same state of stress is shown
in another coordinate system in figure (b).
The components ( ?
xx
, ?
yy
,?
xy
) are given by
(A) (?? / 2,??? / 2, 0 )
(B) (0 , 0 , ?? )
(C) ( ?? , ??? ,?? / 2 ) (D) (0 , 0 , ?? / 2)
Q.9 A rigid link PQ is undergoing plane motion as shown in the figure (V
P
and V
Q
are non-zero). V
QP
is
the relative velocity of point Q with respect to point P.
Which one of the following is TRUE?
(A) V
QP
has components along and perpendicular to PQ
(B) V
QP
has only one component directed from P to Q
(C) V
QP
has only one component directed from Q to P
(D) V
QP
has only one component perpendicular to PQ
Q.10 The number of degrees of freedom in a planar mechanism having n links and j simple hinge joints
is
(A) 3 ?? ? 3 ? 2??
(B) 3 ?? ? 1 ? 2??
(C) 3?? ? 2??
(D) 2?? ? 3?? + 4
Q.11 The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm.
Assume the acceleration due to gravity g =10 m/s
2
. The natural frequency of this spring-mass
system (in rad/s) is_____________
Q.12 Which of the bearings given below SHOULD NOT be subjected to a thrust load?
(A) Deep groove ball bearing
(B) Angular contact ball bearing
(C) Cylindrical (straight) roller bearing
(D) Single row tapered roller bearing
(a) (b)
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 4/13
Q.13 A channel of width 450 mm branches into two sub-channels having width 300 mm and 200 mm as
shown in figure. If the volumetric flow rate (taking unit depth) of an incompressible flow through
the main channel is 0.9 m
3
/s and the velocity in the sub-channel of width 200 mm is 3 m/s, the
velocity in the sub-channel of width 300 mm is _____________ m/s.
Assume both inlet and outlet to be at the same elevation.
Q.14 For a certain two-dimensional incompressible flow, velocity field is given by 2?? ?? ?? ? ?? 2
?? . The
streamlines for this flow are given by the family of curves
(A) ?? 2
?? 2
= constant (B) ?? ?? 2
= constant
(C) 2?? ?? ? ?? 2
= constant (D) ?? ?? = constant
Q.15 Steady one-dimensional heat conduction takes place across the faces 1 and 3 of a composite slab
consisting of slabs A and B in perfect contact as shown in the figure, where k
?? , k
?? denote the
respective thermal conductivities. Using the data as given in the figure, the interface temperature
T
2
(in ?C) is __________
Q.16 Grashof number signifies the ratio of
(A) inertia force to viscous force
(B) buoyancy force to viscous force
(C) buoyancy force to inertia force
(D) inertia force to surface tension force
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 5/13
Q.17 The INCORRECT statement about the characteristics of critical point of a pure substance is that
(A) there is no constant temperature vaporization process
(B) it has point of inflection with zero slope
(C) the ice directly converts from solid phase to vapor phase
(D) saturated liquid and saturated vapor states are identical
Q.18 For a heat exchanger, ?T
max
is the maximum temperature difference and ?T
min
is the minimum
temperature difference between the two fluids. LMTD is the log mean temperature difference. C
min
and C
max
are the minimum and the maximum heat capacity rates. The maximum possible heat
transfer (Q
max
) between the two fluids is
(A) C
min
LMTD (B) C
min
?T
max
(C) C
max
?T
max
(D) C
max
?T
min
Q.19 The blade and fluid velocities for an axial turbine are as shown in the figure.
The magnitude of absolute velocity at entry is 300 m/s at an angle of 65 ? to the axial direction,
while the magnitude of the absolute velocity at exit is 150 m/s. The exit velocity vector has a
component in the downward direction. Given that the axial (horizontal) velocity is the same at entry
and exit, the specific work (in kJ/kg) is__________
Q.20 Engineering strain of a mild steel sample is recorded as 0.100%. The true strain is
(A) 0.010% (B) 0.055% (C) 0.099% (D) 0.101%
Q.21 Equal amounts of a liquid metal at the same temperature are poured into three moulds made of
steel, copper and aluminum. The shape of the cavity is a cylinder with 15 mm diameter. The size of
the moulds are such that the outside temperature of the moulds do not increase appreciably beyond
the atmospheric temperature during solidification. The sequence of solidification in the mould
from the fastest to slowest is
(Thermal conductivities of steel, copper and aluminum are 60.5, 401 and 237 W/m-K, respectively.
Specific heats of steel, copper and aluminum are 434, 385 and 903 J/kg-K, respectively.
Densities of steel, copper and aluminum are 7854, 8933 and 2700 kg/m
3
, respectively.)
(A) Copper - Steel - Aluminum
(B) Aluminum - Steel - Copper
(C) Copper - Aluminum - Steel
(D) Steel - Copper - Aluminum
150 m/s
300 m/s 150 m/s
65?
Blade speed
Entry
Exit
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 6/13
Q.22 In a wire-cut EDM process the necessary conditions that have to be met for making a successful cut
are that
(A) wire and sample are electrically non-conducting
(B) wire and sample are electrically conducting
(C) wire is electrically conducting and sample is electrically non-conducting
(D) sample is electrically conducting and wire is electrically non-conducting
Q.23 Internal gears are manufactured by
(A) hobbing
(B) shaping with pinion cutter
(C) shaping with rack cutter
(D) milling
Q.24 Match the following part programming codes with their respective functions
Part Programming Codes Functions
P. G01 I. Spindle stop
Q. G03 II. Spindle rotation, clockwise
R. M03 III. Circular interpolation, anticlockwise
S. M05 IV. Linear interpolation
(A) P ? II, Q ? I, R ? IV, S ? III (B) P ? IV, Q ? II, R ? III, S ? I
(C) P ? IV, Q ? III, R ? II, S ? I (D) P ? III, Q ? IV, R ? II, S ? I
Q.25 In PERT chart, the activity time distribution is
(A) Normal (B) Binomial (C) Poisson (D) Beta
Q. 26 ? Q. 55 carry two marks each.
Q.26
The number of linearly independent eigenvectors of matrix ?? =
2 1 0
0 2 0
0 0 3
is _________
Q.27
The value of the line integral
?
? ?
C
ds r F , where C is a circle of radius
4
?? units is ________
Here, ??
?? ,?? = ?? ?? + 2?? ?? and ?? ? is the UNIT tangent vector on the curve C at an arc length s
from a reference point on the curve. ?? and ?? are the basis vectors in the x-y Cartesian reference. In
evaluating the line integral, the curve has to be traversed in the counter-clockwise direction.
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 7/13
Q.28
lim
?? ??
?? 2
+ ?? ? 1 ? ?? is
(A) 0 (B) ? (C) 1/2 (D) ??
Q.29 Three cards were drawn from a pack of 52 cards. The probability that they are a king, a queen, and
a jack is
(A)
16
5525
(B)
64
2197
(C)
3
13
(D)
8
16575
Q.30 An inextensible massless string goes over a frictionless pulley. Two weights of 100 N and 200 N
are attached to the two ends of the string. The weights are released from rest, and start moving due
to gravity. The tension in the string (in N) is __________
Q.31 A circular disc of radius 100 mm and mass 1 kg, initially at rest at position A, rolls without
slipping down a curved path as shown in figure. The speed v of the disc when it reaches position B
is _________ m/s.
Acceleration due to gravity g = 10 m/s
2
.
200 N
100 N
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 8/13
Q.32
A rigid rod (AB) of length ?? = 2 m is undergoing translational as well as rotational motion in the
x-y plane (see the figure). The point A has the velocity ?? 1
= ?? + 2?? m/s. The end B is constrained to
move only along the x direction.
The magnitude of the velocity V
2
(in m/s) at the end B is __________
Q.33 A square plate of dimension L ? L is subjected to a uniform pressure load p = 250 MPa on its
edges as shown in the figure. Assume plane stress conditions. The Young?s modulus E = 200 GPa.
The deformed shape is a square of dimension ?? ? 2 ?? . If ?? = 2 m and ?? = 0.001 m, the Poisson?s
ratio of the plate material is __________
Q.34 Two circular shafts made of same material, one solid (S) and one hollow (H), have the same length
and polar moment of inertia. Both are subjected to same torque. Here, ?
S
is the twist and ?
S
is the
maximum shear stress in the solid shaft, whereas ?
H
is the twist and ?
H
is the maximum shear stress
in the hollow shaft. Which one of the following is TRUE?
(A) ?
S
= ?
H
and ?
S
= ?
H
(B) ??
S
> ?
H
and ?
S
> ?
H
(C) ??
S
< ?
H
and ?
S
< ?
H
(D) ??
S
= ?
H
and ?
S
< ?
H
A
B
V
1
V
2
??=? 45 ?
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 9/13
Q.35 A beam of length L is carrying a uniformly distributed load w per unit length. The flexural rigidity
of the beam is EI. The reaction at the simple support at the right end is
(A)
?? ?? 2
(B)
3?? ?? 8
(C)
?? ?? 4
(D)
?? ?? 8
Q.36 Two masses m are attached to opposite sides of a rigid rotating shaft in the vertical plane. Another
pair of equal masses m
1
is attached to the opposite sides of the shaft in the vertical plane as shown
in figure. Consider m = 1 kg, e = 50 mm, e
1
= 20 mm, b = 0.3 m, a = 2 m and a
1
= 2.5 m. For the
system to be dynamically balanced, m
1
should be ________ kg.
Q.37 A single degree of freedom spring-mass system is subjected to a harmonic force of constant
amplitude. For an excitation frequency of
3?? ?? , the ratio of the amplitude of steady state
response to the static deflection of the spring is __________
w
L
?? ?? ?? ?? ?? ?? m
k
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 10/13
Q.38 A bolted joint has four bolts arranged as shown in figure. The cross sectional area of each bolt is
25 mm
2
. A torque T = 200 N-m is acting on the joint. Neglecting friction due to clamping force,
maximum shear stress in a bolt is ______ MPa.
Q.39 Consider a fully developed steady laminar flow of an incompressible fluid with viscosity ? through
a circular pipe of radius R. Given that the velocity at a radial location of R/2 from the centerline of
the pipe is U
1
, the shear stress at the wall is K?U
1
/R, where K is __________
Q.40 The water jet exiting from a stationary tank through a circular opening of diameter 300 mm
impinges on a rigid wall as shown in the figure. Neglect all minor losses and assume the water level
in the tank to remain constant. The net horizontal force experienced by the wall
is ___________ kN.
Density of water is 1000 kg/m
3
.
Acceleration due to gravity g = 10 m/s
2
.
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
GATE 2016 General Aptitude - GA Set-3
3/3
Q.10 A wire of length 340 mm is to be cut into two parts. One of the parts is to be made into a square and
the other into a rectangle where sides are in the ratio of 1:2. What is the length of the side of the
square (in mm) such that the combined area of the square and the rectangle is a MINIMUM?
(A) 30 (B) 40 (C) 120 (D) 180
END OF THE QUESTION PAPER
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 A real square matrix A is called skew-symmetric if
(A) A
T
= A
(B) A
T
= A
-1
(C) A
T
= ?A
(D) A
T
= A+A
-1
Q.2
Lt
?? ?0
log
e
(1+4?? )
e
3?? ?1
is equal to
(A) 0
(B)
1
12
(C)
4
3
(D) 1
Q.3 Solutions of Laplace?s equation having continuous second-order partial derivatives are called
(A) biharmonic functions
(B) harmonic functions
(C) conjugate harmonic functions
(D) error functions
Q.4 The area (in percentage) under standard normal distribution curve of random variable Z within
limits from ?3 to +3 is __________
Q.5
The root of the function f(x) = x
3
+x ?1 obtained after first iteration on application of Newton-
Raphson scheme using an initial guess of x
0
=1 is
(A) 0.682 (B) 0.686 (C) 0.750 (D) 1.000
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 2/13
Q.6 A force F is acting on a bent bar which is clamped at one end as shown in the figure.
The CORRECT free body diagram is
(A) (B)
(C) (D)
Q.7 The cross-sections of two solid bars made of the same material are shown in the figure. The square
cross-section has flexural (bending) rigidity I
1
, while the circular cross-section has flexural rigidity
I
2
. Both sections have the same cross-sectional area. The ratio I
1
/I
2
is
(A) 1/?? (B) 2/?? (C) ?? /3 (D) ?? /6
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 3/13
Q.8 The state of stress at a point on an element is shown in figure (a). The same state of stress is shown
in another coordinate system in figure (b).
The components ( ?
xx
, ?
yy
,?
xy
) are given by
(A) (?? / 2,??? / 2, 0 )
(B) (0 , 0 , ?? )
(C) ( ?? , ??? ,?? / 2 ) (D) (0 , 0 , ?? / 2)
Q.9 A rigid link PQ is undergoing plane motion as shown in the figure (V
P
and V
Q
are non-zero). V
QP
is
the relative velocity of point Q with respect to point P.
Which one of the following is TRUE?
(A) V
QP
has components along and perpendicular to PQ
(B) V
QP
has only one component directed from P to Q
(C) V
QP
has only one component directed from Q to P
(D) V
QP
has only one component perpendicular to PQ
Q.10 The number of degrees of freedom in a planar mechanism having n links and j simple hinge joints
is
(A) 3 ?? ? 3 ? 2??
(B) 3 ?? ? 1 ? 2??
(C) 3?? ? 2??
(D) 2?? ? 3?? + 4
Q.11 The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm.
Assume the acceleration due to gravity g =10 m/s
2
. The natural frequency of this spring-mass
system (in rad/s) is_____________
Q.12 Which of the bearings given below SHOULD NOT be subjected to a thrust load?
(A) Deep groove ball bearing
(B) Angular contact ball bearing
(C) Cylindrical (straight) roller bearing
(D) Single row tapered roller bearing
(a) (b)
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 4/13
Q.13 A channel of width 450 mm branches into two sub-channels having width 300 mm and 200 mm as
shown in figure. If the volumetric flow rate (taking unit depth) of an incompressible flow through
the main channel is 0.9 m
3
/s and the velocity in the sub-channel of width 200 mm is 3 m/s, the
velocity in the sub-channel of width 300 mm is _____________ m/s.
Assume both inlet and outlet to be at the same elevation.
Q.14 For a certain two-dimensional incompressible flow, velocity field is given by 2?? ?? ?? ? ?? 2
?? . The
streamlines for this flow are given by the family of curves
(A) ?? 2
?? 2
= constant (B) ?? ?? 2
= constant
(C) 2?? ?? ? ?? 2
= constant (D) ?? ?? = constant
Q.15 Steady one-dimensional heat conduction takes place across the faces 1 and 3 of a composite slab
consisting of slabs A and B in perfect contact as shown in the figure, where k
?? , k
?? denote the
respective thermal conductivities. Using the data as given in the figure, the interface temperature
T
2
(in ?C) is __________
Q.16 Grashof number signifies the ratio of
(A) inertia force to viscous force
(B) buoyancy force to viscous force
(C) buoyancy force to inertia force
(D) inertia force to surface tension force
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 5/13
Q.17 The INCORRECT statement about the characteristics of critical point of a pure substance is that
(A) there is no constant temperature vaporization process
(B) it has point of inflection with zero slope
(C) the ice directly converts from solid phase to vapor phase
(D) saturated liquid and saturated vapor states are identical
Q.18 For a heat exchanger, ?T
max
is the maximum temperature difference and ?T
min
is the minimum
temperature difference between the two fluids. LMTD is the log mean temperature difference. C
min
and C
max
are the minimum and the maximum heat capacity rates. The maximum possible heat
transfer (Q
max
) between the two fluids is
(A) C
min
LMTD (B) C
min
?T
max
(C) C
max
?T
max
(D) C
max
?T
min
Q.19 The blade and fluid velocities for an axial turbine are as shown in the figure.
The magnitude of absolute velocity at entry is 300 m/s at an angle of 65 ? to the axial direction,
while the magnitude of the absolute velocity at exit is 150 m/s. The exit velocity vector has a
component in the downward direction. Given that the axial (horizontal) velocity is the same at entry
and exit, the specific work (in kJ/kg) is__________
Q.20 Engineering strain of a mild steel sample is recorded as 0.100%. The true strain is
(A) 0.010% (B) 0.055% (C) 0.099% (D) 0.101%
Q.21 Equal amounts of a liquid metal at the same temperature are poured into three moulds made of
steel, copper and aluminum. The shape of the cavity is a cylinder with 15 mm diameter. The size of
the moulds are such that the outside temperature of the moulds do not increase appreciably beyond
the atmospheric temperature during solidification. The sequence of solidification in the mould
from the fastest to slowest is
(Thermal conductivities of steel, copper and aluminum are 60.5, 401 and 237 W/m-K, respectively.
Specific heats of steel, copper and aluminum are 434, 385 and 903 J/kg-K, respectively.
Densities of steel, copper and aluminum are 7854, 8933 and 2700 kg/m
3
, respectively.)
(A) Copper - Steel - Aluminum
(B) Aluminum - Steel - Copper
(C) Copper - Aluminum - Steel
(D) Steel - Copper - Aluminum
150 m/s
300 m/s 150 m/s
65?
Blade speed
Entry
Exit
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 6/13
Q.22 In a wire-cut EDM process the necessary conditions that have to be met for making a successful cut
are that
(A) wire and sample are electrically non-conducting
(B) wire and sample are electrically conducting
(C) wire is electrically conducting and sample is electrically non-conducting
(D) sample is electrically conducting and wire is electrically non-conducting
Q.23 Internal gears are manufactured by
(A) hobbing
(B) shaping with pinion cutter
(C) shaping with rack cutter
(D) milling
Q.24 Match the following part programming codes with their respective functions
Part Programming Codes Functions
P. G01 I. Spindle stop
Q. G03 II. Spindle rotation, clockwise
R. M03 III. Circular interpolation, anticlockwise
S. M05 IV. Linear interpolation
(A) P ? II, Q ? I, R ? IV, S ? III (B) P ? IV, Q ? II, R ? III, S ? I
(C) P ? IV, Q ? III, R ? II, S ? I (D) P ? III, Q ? IV, R ? II, S ? I
Q.25 In PERT chart, the activity time distribution is
(A) Normal (B) Binomial (C) Poisson (D) Beta
Q. 26 ? Q. 55 carry two marks each.
Q.26
The number of linearly independent eigenvectors of matrix ?? =
2 1 0
0 2 0
0 0 3
is _________
Q.27
The value of the line integral
?
? ?
C
ds r F , where C is a circle of radius
4
?? units is ________
Here, ??
?? ,?? = ?? ?? + 2?? ?? and ?? ? is the UNIT tangent vector on the curve C at an arc length s
from a reference point on the curve. ?? and ?? are the basis vectors in the x-y Cartesian reference. In
evaluating the line integral, the curve has to be traversed in the counter-clockwise direction.
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 7/13
Q.28
lim
?? ??
?? 2
+ ?? ? 1 ? ?? is
(A) 0 (B) ? (C) 1/2 (D) ??
Q.29 Three cards were drawn from a pack of 52 cards. The probability that they are a king, a queen, and
a jack is
(A)
16
5525
(B)
64
2197
(C)
3
13
(D)
8
16575
Q.30 An inextensible massless string goes over a frictionless pulley. Two weights of 100 N and 200 N
are attached to the two ends of the string. The weights are released from rest, and start moving due
to gravity. The tension in the string (in N) is __________
Q.31 A circular disc of radius 100 mm and mass 1 kg, initially at rest at position A, rolls without
slipping down a curved path as shown in figure. The speed v of the disc when it reaches position B
is _________ m/s.
Acceleration due to gravity g = 10 m/s
2
.
200 N
100 N
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 8/13
Q.32
A rigid rod (AB) of length ?? = 2 m is undergoing translational as well as rotational motion in the
x-y plane (see the figure). The point A has the velocity ?? 1
= ?? + 2?? m/s. The end B is constrained to
move only along the x direction.
The magnitude of the velocity V
2
(in m/s) at the end B is __________
Q.33 A square plate of dimension L ? L is subjected to a uniform pressure load p = 250 MPa on its
edges as shown in the figure. Assume plane stress conditions. The Young?s modulus E = 200 GPa.
The deformed shape is a square of dimension ?? ? 2 ?? . If ?? = 2 m and ?? = 0.001 m, the Poisson?s
ratio of the plate material is __________
Q.34 Two circular shafts made of same material, one solid (S) and one hollow (H), have the same length
and polar moment of inertia. Both are subjected to same torque. Here, ?
S
is the twist and ?
S
is the
maximum shear stress in the solid shaft, whereas ?
H
is the twist and ?
H
is the maximum shear stress
in the hollow shaft. Which one of the following is TRUE?
(A) ?
S
= ?
H
and ?
S
= ?
H
(B) ??
S
> ?
H
and ?
S
> ?
H
(C) ??
S
< ?
H
and ?
S
< ?
H
(D) ??
S
= ?
H
and ?
S
< ?
H
A
B
V
1
V
2
??=? 45 ?
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 9/13
Q.35 A beam of length L is carrying a uniformly distributed load w per unit length. The flexural rigidity
of the beam is EI. The reaction at the simple support at the right end is
(A)
?? ?? 2
(B)
3?? ?? 8
(C)
?? ?? 4
(D)
?? ?? 8
Q.36 Two masses m are attached to opposite sides of a rigid rotating shaft in the vertical plane. Another
pair of equal masses m
1
is attached to the opposite sides of the shaft in the vertical plane as shown
in figure. Consider m = 1 kg, e = 50 mm, e
1
= 20 mm, b = 0.3 m, a = 2 m and a
1
= 2.5 m. For the
system to be dynamically balanced, m
1
should be ________ kg.
Q.37 A single degree of freedom spring-mass system is subjected to a harmonic force of constant
amplitude. For an excitation frequency of
3?? ?? , the ratio of the amplitude of steady state
response to the static deflection of the spring is __________
w
L
?? ?? ?? ?? ?? ?? m
k
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 10/13
Q.38 A bolted joint has four bolts arranged as shown in figure. The cross sectional area of each bolt is
25 mm
2
. A torque T = 200 N-m is acting on the joint. Neglecting friction due to clamping force,
maximum shear stress in a bolt is ______ MPa.
Q.39 Consider a fully developed steady laminar flow of an incompressible fluid with viscosity ? through
a circular pipe of radius R. Given that the velocity at a radial location of R/2 from the centerline of
the pipe is U
1
, the shear stress at the wall is K?U
1
/R, where K is __________
Q.40 The water jet exiting from a stationary tank through a circular opening of diameter 300 mm
impinges on a rigid wall as shown in the figure. Neglect all minor losses and assume the water level
in the tank to remain constant. The net horizontal force experienced by the wall
is ___________ kN.
Density of water is 1000 kg/m
3
.
Acceleration due to gravity g = 10 m/s
2
.
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 11/13
Q.41
For a two-dimensional flow, the velocity field is j
y x
y
i
y x
x
u
? ?
2 2 2 2
?
?
?
=
?
, where i
?
and j
?
are
the basis vectors in the x-y Cartesian coordinate system. Identify the CORRECT statements from
below.
(1) The flow is incompressible.
(2) The flow is unsteady.
(3) y-component of acceleration,
? ?
2
2 2
y x
y
a
y
?
?
=
(4) x-component of acceleration,
? ?
2
2 2
) (
y x
y x
a
x
?
? ?
=
(A) (2) and (3) (B) (1) and (3) (C) (1) and (2) (D) (3) and (4)
Q.42 Two large parallel plates having a gap of 10 mm in between them are maintained at temperatures
T
1
= 1000 K and T
2
= 400 K. Given emissivity values, ?? 1
= 0.5, ?? 2
= 0.25 and Stefan-Boltzmann
constant ? = 5.67 ? 10
?8
W/m
2
-K
4
, the heat transfer between the plates (in kW/m
2
) is __________
_________
Q.43 A cylindrical steel rod, 0.01 m in diameter and 0.2 m in length is first heated to 750
o
C and then
immersed in a water bath at 100
o
C. The heat transfer coefficient is 250 W/m
2
-K. The density,
specific heat and thermal conductivity of steel are ? = 7801 kg/m
3
, c = 473 J/kg-K, and
k = 43 W/m-K, respectively. The time required for the rod to reach 300
o
C is ________ seconds.
Q.44 Steam at an initial enthalpy of 100 kJ/kg and inlet velocity of 100 m/s, enters an insulated
horizontal nozzle. It leaves the nozzle at 200 m/s. The exit enthalpy (in kJ/kg) is __________
Q.45 In a mixture of dry air and water vapor at a total pressure of 750 mm of Hg, the partial pressure of
water vapor is 20 mm of Hg. The humidity ratio of the air in grams of water vapor per kg of dry air
(g
w
/kg
da
) is __________
Q.46 In a 3-stage air compressor, the inlet pressure is ?? 1
, discharge pressure is ?? 4
and the intermediate
pressures are ?? 2
and ?? 3
( ?? 2
< ?? 3
). The total pressure ratio of the compressor is 10 and the pressure
ratios of the stages are equal. If ?? 1
= 100 kPa, the value of the pressure ?? 3
(in kPa) is __________
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
GATE 2016 General Aptitude - GA Set-3
3/3
Q.10 A wire of length 340 mm is to be cut into two parts. One of the parts is to be made into a square and
the other into a rectangle where sides are in the ratio of 1:2. What is the length of the side of the
square (in mm) such that the combined area of the square and the rectangle is a MINIMUM?
(A) 30 (B) 40 (C) 120 (D) 180
END OF THE QUESTION PAPER
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 A real square matrix A is called skew-symmetric if
(A) A
T
= A
(B) A
T
= A
-1
(C) A
T
= ?A
(D) A
T
= A+A
-1
Q.2
Lt
?? ?0
log
e
(1+4?? )
e
3?? ?1
is equal to
(A) 0
(B)
1
12
(C)
4
3
(D) 1
Q.3 Solutions of Laplace?s equation having continuous second-order partial derivatives are called
(A) biharmonic functions
(B) harmonic functions
(C) conjugate harmonic functions
(D) error functions
Q.4 The area (in percentage) under standard normal distribution curve of random variable Z within
limits from ?3 to +3 is __________
Q.5
The root of the function f(x) = x
3
+x ?1 obtained after first iteration on application of Newton-
Raphson scheme using an initial guess of x
0
=1 is
(A) 0.682 (B) 0.686 (C) 0.750 (D) 1.000
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 2/13
Q.6 A force F is acting on a bent bar which is clamped at one end as shown in the figure.
The CORRECT free body diagram is
(A) (B)
(C) (D)
Q.7 The cross-sections of two solid bars made of the same material are shown in the figure. The square
cross-section has flexural (bending) rigidity I
1
, while the circular cross-section has flexural rigidity
I
2
. Both sections have the same cross-sectional area. The ratio I
1
/I
2
is
(A) 1/?? (B) 2/?? (C) ?? /3 (D) ?? /6
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 3/13
Q.8 The state of stress at a point on an element is shown in figure (a). The same state of stress is shown
in another coordinate system in figure (b).
The components ( ?
xx
, ?
yy
,?
xy
) are given by
(A) (?? / 2,??? / 2, 0 )
(B) (0 , 0 , ?? )
(C) ( ?? , ??? ,?? / 2 ) (D) (0 , 0 , ?? / 2)
Q.9 A rigid link PQ is undergoing plane motion as shown in the figure (V
P
and V
Q
are non-zero). V
QP
is
the relative velocity of point Q with respect to point P.
Which one of the following is TRUE?
(A) V
QP
has components along and perpendicular to PQ
(B) V
QP
has only one component directed from P to Q
(C) V
QP
has only one component directed from Q to P
(D) V
QP
has only one component perpendicular to PQ
Q.10 The number of degrees of freedom in a planar mechanism having n links and j simple hinge joints
is
(A) 3 ?? ? 3 ? 2??
(B) 3 ?? ? 1 ? 2??
(C) 3?? ? 2??
(D) 2?? ? 3?? + 4
Q.11 The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm.
Assume the acceleration due to gravity g =10 m/s
2
. The natural frequency of this spring-mass
system (in rad/s) is_____________
Q.12 Which of the bearings given below SHOULD NOT be subjected to a thrust load?
(A) Deep groove ball bearing
(B) Angular contact ball bearing
(C) Cylindrical (straight) roller bearing
(D) Single row tapered roller bearing
(a) (b)
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 4/13
Q.13 A channel of width 450 mm branches into two sub-channels having width 300 mm and 200 mm as
shown in figure. If the volumetric flow rate (taking unit depth) of an incompressible flow through
the main channel is 0.9 m
3
/s and the velocity in the sub-channel of width 200 mm is 3 m/s, the
velocity in the sub-channel of width 300 mm is _____________ m/s.
Assume both inlet and outlet to be at the same elevation.
Q.14 For a certain two-dimensional incompressible flow, velocity field is given by 2?? ?? ?? ? ?? 2
?? . The
streamlines for this flow are given by the family of curves
(A) ?? 2
?? 2
= constant (B) ?? ?? 2
= constant
(C) 2?? ?? ? ?? 2
= constant (D) ?? ?? = constant
Q.15 Steady one-dimensional heat conduction takes place across the faces 1 and 3 of a composite slab
consisting of slabs A and B in perfect contact as shown in the figure, where k
?? , k
?? denote the
respective thermal conductivities. Using the data as given in the figure, the interface temperature
T
2
(in ?C) is __________
Q.16 Grashof number signifies the ratio of
(A) inertia force to viscous force
(B) buoyancy force to viscous force
(C) buoyancy force to inertia force
(D) inertia force to surface tension force
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 5/13
Q.17 The INCORRECT statement about the characteristics of critical point of a pure substance is that
(A) there is no constant temperature vaporization process
(B) it has point of inflection with zero slope
(C) the ice directly converts from solid phase to vapor phase
(D) saturated liquid and saturated vapor states are identical
Q.18 For a heat exchanger, ?T
max
is the maximum temperature difference and ?T
min
is the minimum
temperature difference between the two fluids. LMTD is the log mean temperature difference. C
min
and C
max
are the minimum and the maximum heat capacity rates. The maximum possible heat
transfer (Q
max
) between the two fluids is
(A) C
min
LMTD (B) C
min
?T
max
(C) C
max
?T
max
(D) C
max
?T
min
Q.19 The blade and fluid velocities for an axial turbine are as shown in the figure.
The magnitude of absolute velocity at entry is 300 m/s at an angle of 65 ? to the axial direction,
while the magnitude of the absolute velocity at exit is 150 m/s. The exit velocity vector has a
component in the downward direction. Given that the axial (horizontal) velocity is the same at entry
and exit, the specific work (in kJ/kg) is__________
Q.20 Engineering strain of a mild steel sample is recorded as 0.100%. The true strain is
(A) 0.010% (B) 0.055% (C) 0.099% (D) 0.101%
Q.21 Equal amounts of a liquid metal at the same temperature are poured into three moulds made of
steel, copper and aluminum. The shape of the cavity is a cylinder with 15 mm diameter. The size of
the moulds are such that the outside temperature of the moulds do not increase appreciably beyond
the atmospheric temperature during solidification. The sequence of solidification in the mould
from the fastest to slowest is
(Thermal conductivities of steel, copper and aluminum are 60.5, 401 and 237 W/m-K, respectively.
Specific heats of steel, copper and aluminum are 434, 385 and 903 J/kg-K, respectively.
Densities of steel, copper and aluminum are 7854, 8933 and 2700 kg/m
3
, respectively.)
(A) Copper - Steel - Aluminum
(B) Aluminum - Steel - Copper
(C) Copper - Aluminum - Steel
(D) Steel - Copper - Aluminum
150 m/s
300 m/s 150 m/s
65?
Blade speed
Entry
Exit
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 6/13
Q.22 In a wire-cut EDM process the necessary conditions that have to be met for making a successful cut
are that
(A) wire and sample are electrically non-conducting
(B) wire and sample are electrically conducting
(C) wire is electrically conducting and sample is electrically non-conducting
(D) sample is electrically conducting and wire is electrically non-conducting
Q.23 Internal gears are manufactured by
(A) hobbing
(B) shaping with pinion cutter
(C) shaping with rack cutter
(D) milling
Q.24 Match the following part programming codes with their respective functions
Part Programming Codes Functions
P. G01 I. Spindle stop
Q. G03 II. Spindle rotation, clockwise
R. M03 III. Circular interpolation, anticlockwise
S. M05 IV. Linear interpolation
(A) P ? II, Q ? I, R ? IV, S ? III (B) P ? IV, Q ? II, R ? III, S ? I
(C) P ? IV, Q ? III, R ? II, S ? I (D) P ? III, Q ? IV, R ? II, S ? I
Q.25 In PERT chart, the activity time distribution is
(A) Normal (B) Binomial (C) Poisson (D) Beta
Q. 26 ? Q. 55 carry two marks each.
Q.26
The number of linearly independent eigenvectors of matrix ?? =
2 1 0
0 2 0
0 0 3
is _________
Q.27
The value of the line integral
?
? ?
C
ds r F , where C is a circle of radius
4
?? units is ________
Here, ??
?? ,?? = ?? ?? + 2?? ?? and ?? ? is the UNIT tangent vector on the curve C at an arc length s
from a reference point on the curve. ?? and ?? are the basis vectors in the x-y Cartesian reference. In
evaluating the line integral, the curve has to be traversed in the counter-clockwise direction.
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 7/13
Q.28
lim
?? ??
?? 2
+ ?? ? 1 ? ?? is
(A) 0 (B) ? (C) 1/2 (D) ??
Q.29 Three cards were drawn from a pack of 52 cards. The probability that they are a king, a queen, and
a jack is
(A)
16
5525
(B)
64
2197
(C)
3
13
(D)
8
16575
Q.30 An inextensible massless string goes over a frictionless pulley. Two weights of 100 N and 200 N
are attached to the two ends of the string. The weights are released from rest, and start moving due
to gravity. The tension in the string (in N) is __________
Q.31 A circular disc of radius 100 mm and mass 1 kg, initially at rest at position A, rolls without
slipping down a curved path as shown in figure. The speed v of the disc when it reaches position B
is _________ m/s.
Acceleration due to gravity g = 10 m/s
2
.
200 N
100 N
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 8/13
Q.32
A rigid rod (AB) of length ?? = 2 m is undergoing translational as well as rotational motion in the
x-y plane (see the figure). The point A has the velocity ?? 1
= ?? + 2?? m/s. The end B is constrained to
move only along the x direction.
The magnitude of the velocity V
2
(in m/s) at the end B is __________
Q.33 A square plate of dimension L ? L is subjected to a uniform pressure load p = 250 MPa on its
edges as shown in the figure. Assume plane stress conditions. The Young?s modulus E = 200 GPa.
The deformed shape is a square of dimension ?? ? 2 ?? . If ?? = 2 m and ?? = 0.001 m, the Poisson?s
ratio of the plate material is __________
Q.34 Two circular shafts made of same material, one solid (S) and one hollow (H), have the same length
and polar moment of inertia. Both are subjected to same torque. Here, ?
S
is the twist and ?
S
is the
maximum shear stress in the solid shaft, whereas ?
H
is the twist and ?
H
is the maximum shear stress
in the hollow shaft. Which one of the following is TRUE?
(A) ?
S
= ?
H
and ?
S
= ?
H
(B) ??
S
> ?
H
and ?
S
> ?
H
(C) ??
S
< ?
H
and ?
S
< ?
H
(D) ??
S
= ?
H
and ?
S
< ?
H
A
B
V
1
V
2
??=? 45 ?
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 9/13
Q.35 A beam of length L is carrying a uniformly distributed load w per unit length. The flexural rigidity
of the beam is EI. The reaction at the simple support at the right end is
(A)
?? ?? 2
(B)
3?? ?? 8
(C)
?? ?? 4
(D)
?? ?? 8
Q.36 Two masses m are attached to opposite sides of a rigid rotating shaft in the vertical plane. Another
pair of equal masses m
1
is attached to the opposite sides of the shaft in the vertical plane as shown
in figure. Consider m = 1 kg, e = 50 mm, e
1
= 20 mm, b = 0.3 m, a = 2 m and a
1
= 2.5 m. For the
system to be dynamically balanced, m
1
should be ________ kg.
Q.37 A single degree of freedom spring-mass system is subjected to a harmonic force of constant
amplitude. For an excitation frequency of
3?? ?? , the ratio of the amplitude of steady state
response to the static deflection of the spring is __________
w
L
?? ?? ?? ?? ?? ?? m
k
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 10/13
Q.38 A bolted joint has four bolts arranged as shown in figure. The cross sectional area of each bolt is
25 mm
2
. A torque T = 200 N-m is acting on the joint. Neglecting friction due to clamping force,
maximum shear stress in a bolt is ______ MPa.
Q.39 Consider a fully developed steady laminar flow of an incompressible fluid with viscosity ? through
a circular pipe of radius R. Given that the velocity at a radial location of R/2 from the centerline of
the pipe is U
1
, the shear stress at the wall is K?U
1
/R, where K is __________
Q.40 The water jet exiting from a stationary tank through a circular opening of diameter 300 mm
impinges on a rigid wall as shown in the figure. Neglect all minor losses and assume the water level
in the tank to remain constant. The net horizontal force experienced by the wall
is ___________ kN.
Density of water is 1000 kg/m
3
.
Acceleration due to gravity g = 10 m/s
2
.
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 11/13
Q.41
For a two-dimensional flow, the velocity field is j
y x
y
i
y x
x
u
? ?
2 2 2 2
?
?
?
=
?
, where i
?
and j
?
are
the basis vectors in the x-y Cartesian coordinate system. Identify the CORRECT statements from
below.
(1) The flow is incompressible.
(2) The flow is unsteady.
(3) y-component of acceleration,
? ?
2
2 2
y x
y
a
y
?
?
=
(4) x-component of acceleration,
? ?
2
2 2
) (
y x
y x
a
x
?
? ?
=
(A) (2) and (3) (B) (1) and (3) (C) (1) and (2) (D) (3) and (4)
Q.42 Two large parallel plates having a gap of 10 mm in between them are maintained at temperatures
T
1
= 1000 K and T
2
= 400 K. Given emissivity values, ?? 1
= 0.5, ?? 2
= 0.25 and Stefan-Boltzmann
constant ? = 5.67 ? 10
?8
W/m
2
-K
4
, the heat transfer between the plates (in kW/m
2
) is __________
_________
Q.43 A cylindrical steel rod, 0.01 m in diameter and 0.2 m in length is first heated to 750
o
C and then
immersed in a water bath at 100
o
C. The heat transfer coefficient is 250 W/m
2
-K. The density,
specific heat and thermal conductivity of steel are ? = 7801 kg/m
3
, c = 473 J/kg-K, and
k = 43 W/m-K, respectively. The time required for the rod to reach 300
o
C is ________ seconds.
Q.44 Steam at an initial enthalpy of 100 kJ/kg and inlet velocity of 100 m/s, enters an insulated
horizontal nozzle. It leaves the nozzle at 200 m/s. The exit enthalpy (in kJ/kg) is __________
Q.45 In a mixture of dry air and water vapor at a total pressure of 750 mm of Hg, the partial pressure of
water vapor is 20 mm of Hg. The humidity ratio of the air in grams of water vapor per kg of dry air
(g
w
/kg
da
) is __________
Q.46 In a 3-stage air compressor, the inlet pressure is ?? 1
, discharge pressure is ?? 4
and the intermediate
pressures are ?? 2
and ?? 3
( ?? 2
< ?? 3
). The total pressure ratio of the compressor is 10 and the pressure
ratios of the stages are equal. If ?? 1
= 100 kPa, the value of the pressure ?? 3
(in kPa) is __________
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 12/13
Q.47 In the vapour compression cycle shown in the figure, the evaporating and condensing temperatures
are 260 K and 310 K, respectively. The compressor takes in liquid-vapour mixture (state 1) and
isentropically compresses it to a dry saturated vapour condition (state 2). The specific heat of the
liquid refrigerant is 4.8 kJ/kg-K and may be treated as constant. The enthalpy of evaporation for the
refrigerant at 310 K is 1054 kJ/kg.
The difference between the enthalpies at state points 1 and 0 (in kJ/kg) is ____________
Q.48 Spot welding of two steel sheets each 2 mm thick is carried out successfully by passing 4 kA of
current for 0.2 seconds through the electrodes. The resulting weld nugget formed between the
sheets is 5 mm in diameter. Assuming cylindrical shape for the nugget, the thickness of the nugget
is________mm.
Latent heat of fusion for steel 1400 kJ/kg
Effective resistance of the weld joint 200 ? ?
Density of steel 8000 kg/m
3
Q.49 For an orthogonal cutting operation, tool material is HSS, rake angle is 22?, chip thickness is
0.8 mm, speed is 48 m/min and feed is 0.4 mm/rev. The shear plane angle (in degrees) is
(A) 19.24 (B) 29.70 (C) 56.00 (D) 68.75
Q.50 In a sheet metal of 2 mm thickness a hole of 10 mm diameter needs to be punched. The yield
strength in tension of the sheet material is 100 MPa and its ultimate shear strength is 80 MPa. The
force required to punch the hole (in kN) is __________
Q.51 In a single point turning operation with cemented carbide tool and steel work piece, it is found that
the Taylor?s exponent is 0.25. If the cutting speed is reduced by 50% then the tool life changes by
______ times.
FirstRanker.com - FirstRanker's Choice
GATE 2016 General Aptitude - GA Set-3
1/3
Q. 1 ? Q. 5 carry one mark each.
Q.1 Based on the given statements, select the appropriate option with respect to grammar and usage.
Statements
(i) The height of Mr. X is 6 feet.
(ii) The height of Mr. Y is 5 feet.
(A) Mr. X is longer than Mr. Y.
(B) Mr. X is more elongated than Mr. Y.
(C) Mr. X is taller than Mr. Y.
(D) Mr. X is lengthier than Mr. Y.
Q.2 The students ___________ the teacher on teachers? day for twenty years of dedicated teaching.
(A) facilitated (B) felicitated (C) fantasized (D) facillitated
Q.3 After India?s cricket world cup victory in 1985, Shrotria who was playing both tennis and cricket
till then, decided to concentrate only on cricket. And the rest is history.
What does the underlined phrase mean in this context?
(A) history will rest in peace (B) rest is recorded in history books
(C) rest is well known (D) rest is archaic
Q.4
Given (9 inches)
?
= (0.25 yards)
?
, which one of the following statements is TRUE?
(A) 3 inches = 0.5 yards (B) 9 inches = 1.5 yards
(C) 9 inches = 0.25 yards (D) 81 inches = 0.0625 yards
Q.5 S, M, E and F are working in shifts in a team to finish a project. M works with twice the efficiency
of others but for half as many days as E worked. S and M have 6 hour shifts in a day, whereas E
and F have 12 hours shifts. What is the ratio of contribution of M to contribution of E in the
project?
(A) 1:1 (B) 1:2 (C) 1:4 (D) 2:1
Q. 6 ? Q.
Q.6 The
Fro
(A)
Q.7 Soc
they
In t
way
Wh
(A)
(C)
Q.8 Tw
mar
(A)
Q.9 M
5 k
the
(A)
GATE 2016
10 carry tw
e Venn diagr
om the data g
) 44
cial science
y were instit
the time of g
ys of knowle
hich of the fo
(i) Soc
(ii) Soc
(iii) Soc
(iv) Soc
) (ii) only
) (ii) and (iv
wo and a quar
rkings seeme
) 8:15
and N start f
km South and
end of their
) 18.60
wo marks
ram shows th
given, the num
(B)
disciplines w
tutionalized.
globalization
edge product
ollowing can
cial science d
cial science d
cial science d
cial science m
v) only
rter hours ba
ed to show 1
(B)
from the sam
d then 4 km
travel?
(B)
each.
he preference
mber of stud
51
were in exist
In varying
and the econ
tion have bec
be logically
disciplines h
disciplines h
disciplines al
must maintai
ack, when see
:30. What is
11:15
me location. M
South-East.
22.50
e of the stude
dents who lik
(C)
tence in an a
degrees, they
nomic rise o
come obsolet
y inferred from
ave become
ad a pre-colo
lways promo
in disciplinar
(B)
(D)
en in a mirro
s the actual cu
(C)
M travels 10
What is the
(C)
ent populatio
ke to read boo
79
amorphous f
y were inten
f postcolonia
te.
m the above
obsolete.
onial origin.
ote colonialis
ry boundarie
(i) and (iii)
(iii) and (iv
or, the reflect
urrent time s
12:15
0 km East an
e shortest dis
20.61
on for leisure
oks or play s
(D)
form until th
nded to furth
al countries l
statements?
sm.
es.
) only
v) only
tion of a wal
shown by the
(D)
nd then 10 km
stance (in km
(D)
General Ap
e activities.
sports is ____
108
he colonial p
her the colon
like India, co
ll clock with
e clock?
12:45
m North-Eas
m) between M
25.00
ptitude - GA Set-
2/3
__.
eriod when
nial interest.
onventional
out number
st. N travels
M and N at
3
3
GATE 2016 General Aptitude - GA Set-3
3/3
Q.10 A wire of length 340 mm is to be cut into two parts. One of the parts is to be made into a square and
the other into a rectangle where sides are in the ratio of 1:2. What is the length of the side of the
square (in mm) such that the combined area of the square and the rectangle is a MINIMUM?
(A) 30 (B) 40 (C) 120 (D) 180
END OF THE QUESTION PAPER
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 A real square matrix A is called skew-symmetric if
(A) A
T
= A
(B) A
T
= A
-1
(C) A
T
= ?A
(D) A
T
= A+A
-1
Q.2
Lt
?? ?0
log
e
(1+4?? )
e
3?? ?1
is equal to
(A) 0
(B)
1
12
(C)
4
3
(D) 1
Q.3 Solutions of Laplace?s equation having continuous second-order partial derivatives are called
(A) biharmonic functions
(B) harmonic functions
(C) conjugate harmonic functions
(D) error functions
Q.4 The area (in percentage) under standard normal distribution curve of random variable Z within
limits from ?3 to +3 is __________
Q.5
The root of the function f(x) = x
3
+x ?1 obtained after first iteration on application of Newton-
Raphson scheme using an initial guess of x
0
=1 is
(A) 0.682 (B) 0.686 (C) 0.750 (D) 1.000
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 2/13
Q.6 A force F is acting on a bent bar which is clamped at one end as shown in the figure.
The CORRECT free body diagram is
(A) (B)
(C) (D)
Q.7 The cross-sections of two solid bars made of the same material are shown in the figure. The square
cross-section has flexural (bending) rigidity I
1
, while the circular cross-section has flexural rigidity
I
2
. Both sections have the same cross-sectional area. The ratio I
1
/I
2
is
(A) 1/?? (B) 2/?? (C) ?? /3 (D) ?? /6
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 3/13
Q.8 The state of stress at a point on an element is shown in figure (a). The same state of stress is shown
in another coordinate system in figure (b).
The components ( ?
xx
, ?
yy
,?
xy
) are given by
(A) (?? / 2,??? / 2, 0 )
(B) (0 , 0 , ?? )
(C) ( ?? , ??? ,?? / 2 ) (D) (0 , 0 , ?? / 2)
Q.9 A rigid link PQ is undergoing plane motion as shown in the figure (V
P
and V
Q
are non-zero). V
QP
is
the relative velocity of point Q with respect to point P.
Which one of the following is TRUE?
(A) V
QP
has components along and perpendicular to PQ
(B) V
QP
has only one component directed from P to Q
(C) V
QP
has only one component directed from Q to P
(D) V
QP
has only one component perpendicular to PQ
Q.10 The number of degrees of freedom in a planar mechanism having n links and j simple hinge joints
is
(A) 3 ?? ? 3 ? 2??
(B) 3 ?? ? 1 ? 2??
(C) 3?? ? 2??
(D) 2?? ? 3?? + 4
Q.11 The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm.
Assume the acceleration due to gravity g =10 m/s
2
. The natural frequency of this spring-mass
system (in rad/s) is_____________
Q.12 Which of the bearings given below SHOULD NOT be subjected to a thrust load?
(A) Deep groove ball bearing
(B) Angular contact ball bearing
(C) Cylindrical (straight) roller bearing
(D) Single row tapered roller bearing
(a) (b)
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 4/13
Q.13 A channel of width 450 mm branches into two sub-channels having width 300 mm and 200 mm as
shown in figure. If the volumetric flow rate (taking unit depth) of an incompressible flow through
the main channel is 0.9 m
3
/s and the velocity in the sub-channel of width 200 mm is 3 m/s, the
velocity in the sub-channel of width 300 mm is _____________ m/s.
Assume both inlet and outlet to be at the same elevation.
Q.14 For a certain two-dimensional incompressible flow, velocity field is given by 2?? ?? ?? ? ?? 2
?? . The
streamlines for this flow are given by the family of curves
(A) ?? 2
?? 2
= constant (B) ?? ?? 2
= constant
(C) 2?? ?? ? ?? 2
= constant (D) ?? ?? = constant
Q.15 Steady one-dimensional heat conduction takes place across the faces 1 and 3 of a composite slab
consisting of slabs A and B in perfect contact as shown in the figure, where k
?? , k
?? denote the
respective thermal conductivities. Using the data as given in the figure, the interface temperature
T
2
(in ?C) is __________
Q.16 Grashof number signifies the ratio of
(A) inertia force to viscous force
(B) buoyancy force to viscous force
(C) buoyancy force to inertia force
(D) inertia force to surface tension force
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 5/13
Q.17 The INCORRECT statement about the characteristics of critical point of a pure substance is that
(A) there is no constant temperature vaporization process
(B) it has point of inflection with zero slope
(C) the ice directly converts from solid phase to vapor phase
(D) saturated liquid and saturated vapor states are identical
Q.18 For a heat exchanger, ?T
max
is the maximum temperature difference and ?T
min
is the minimum
temperature difference between the two fluids. LMTD is the log mean temperature difference. C
min
and C
max
are the minimum and the maximum heat capacity rates. The maximum possible heat
transfer (Q
max
) between the two fluids is
(A) C
min
LMTD (B) C
min
?T
max
(C) C
max
?T
max
(D) C
max
?T
min
Q.19 The blade and fluid velocities for an axial turbine are as shown in the figure.
The magnitude of absolute velocity at entry is 300 m/s at an angle of 65 ? to the axial direction,
while the magnitude of the absolute velocity at exit is 150 m/s. The exit velocity vector has a
component in the downward direction. Given that the axial (horizontal) velocity is the same at entry
and exit, the specific work (in kJ/kg) is__________
Q.20 Engineering strain of a mild steel sample is recorded as 0.100%. The true strain is
(A) 0.010% (B) 0.055% (C) 0.099% (D) 0.101%
Q.21 Equal amounts of a liquid metal at the same temperature are poured into three moulds made of
steel, copper and aluminum. The shape of the cavity is a cylinder with 15 mm diameter. The size of
the moulds are such that the outside temperature of the moulds do not increase appreciably beyond
the atmospheric temperature during solidification. The sequence of solidification in the mould
from the fastest to slowest is
(Thermal conductivities of steel, copper and aluminum are 60.5, 401 and 237 W/m-K, respectively.
Specific heats of steel, copper and aluminum are 434, 385 and 903 J/kg-K, respectively.
Densities of steel, copper and aluminum are 7854, 8933 and 2700 kg/m
3
, respectively.)
(A) Copper - Steel - Aluminum
(B) Aluminum - Steel - Copper
(C) Copper - Aluminum - Steel
(D) Steel - Copper - Aluminum
150 m/s
300 m/s 150 m/s
65?
Blade speed
Entry
Exit
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 6/13
Q.22 In a wire-cut EDM process the necessary conditions that have to be met for making a successful cut
are that
(A) wire and sample are electrically non-conducting
(B) wire and sample are electrically conducting
(C) wire is electrically conducting and sample is electrically non-conducting
(D) sample is electrically conducting and wire is electrically non-conducting
Q.23 Internal gears are manufactured by
(A) hobbing
(B) shaping with pinion cutter
(C) shaping with rack cutter
(D) milling
Q.24 Match the following part programming codes with their respective functions
Part Programming Codes Functions
P. G01 I. Spindle stop
Q. G03 II. Spindle rotation, clockwise
R. M03 III. Circular interpolation, anticlockwise
S. M05 IV. Linear interpolation
(A) P ? II, Q ? I, R ? IV, S ? III (B) P ? IV, Q ? II, R ? III, S ? I
(C) P ? IV, Q ? III, R ? II, S ? I (D) P ? III, Q ? IV, R ? II, S ? I
Q.25 In PERT chart, the activity time distribution is
(A) Normal (B) Binomial (C) Poisson (D) Beta
Q. 26 ? Q. 55 carry two marks each.
Q.26
The number of linearly independent eigenvectors of matrix ?? =
2 1 0
0 2 0
0 0 3
is _________
Q.27
The value of the line integral
?
? ?
C
ds r F , where C is a circle of radius
4
?? units is ________
Here, ??
?? ,?? = ?? ?? + 2?? ?? and ?? ? is the UNIT tangent vector on the curve C at an arc length s
from a reference point on the curve. ?? and ?? are the basis vectors in the x-y Cartesian reference. In
evaluating the line integral, the curve has to be traversed in the counter-clockwise direction.
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 7/13
Q.28
lim
?? ??
?? 2
+ ?? ? 1 ? ?? is
(A) 0 (B) ? (C) 1/2 (D) ??
Q.29 Three cards were drawn from a pack of 52 cards. The probability that they are a king, a queen, and
a jack is
(A)
16
5525
(B)
64
2197
(C)
3
13
(D)
8
16575
Q.30 An inextensible massless string goes over a frictionless pulley. Two weights of 100 N and 200 N
are attached to the two ends of the string. The weights are released from rest, and start moving due
to gravity. The tension in the string (in N) is __________
Q.31 A circular disc of radius 100 mm and mass 1 kg, initially at rest at position A, rolls without
slipping down a curved path as shown in figure. The speed v of the disc when it reaches position B
is _________ m/s.
Acceleration due to gravity g = 10 m/s
2
.
200 N
100 N
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 8/13
Q.32
A rigid rod (AB) of length ?? = 2 m is undergoing translational as well as rotational motion in the
x-y plane (see the figure). The point A has the velocity ?? 1
= ?? + 2?? m/s. The end B is constrained to
move only along the x direction.
The magnitude of the velocity V
2
(in m/s) at the end B is __________
Q.33 A square plate of dimension L ? L is subjected to a uniform pressure load p = 250 MPa on its
edges as shown in the figure. Assume plane stress conditions. The Young?s modulus E = 200 GPa.
The deformed shape is a square of dimension ?? ? 2 ?? . If ?? = 2 m and ?? = 0.001 m, the Poisson?s
ratio of the plate material is __________
Q.34 Two circular shafts made of same material, one solid (S) and one hollow (H), have the same length
and polar moment of inertia. Both are subjected to same torque. Here, ?
S
is the twist and ?
S
is the
maximum shear stress in the solid shaft, whereas ?
H
is the twist and ?
H
is the maximum shear stress
in the hollow shaft. Which one of the following is TRUE?
(A) ?
S
= ?
H
and ?
S
= ?
H
(B) ??
S
> ?
H
and ?
S
> ?
H
(C) ??
S
< ?
H
and ?
S
< ?
H
(D) ??
S
= ?
H
and ?
S
< ?
H
A
B
V
1
V
2
??=? 45 ?
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 9/13
Q.35 A beam of length L is carrying a uniformly distributed load w per unit length. The flexural rigidity
of the beam is EI. The reaction at the simple support at the right end is
(A)
?? ?? 2
(B)
3?? ?? 8
(C)
?? ?? 4
(D)
?? ?? 8
Q.36 Two masses m are attached to opposite sides of a rigid rotating shaft in the vertical plane. Another
pair of equal masses m
1
is attached to the opposite sides of the shaft in the vertical plane as shown
in figure. Consider m = 1 kg, e = 50 mm, e
1
= 20 mm, b = 0.3 m, a = 2 m and a
1
= 2.5 m. For the
system to be dynamically balanced, m
1
should be ________ kg.
Q.37 A single degree of freedom spring-mass system is subjected to a harmonic force of constant
amplitude. For an excitation frequency of
3?? ?? , the ratio of the amplitude of steady state
response to the static deflection of the spring is __________
w
L
?? ?? ?? ?? ?? ?? m
k
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 10/13
Q.38 A bolted joint has four bolts arranged as shown in figure. The cross sectional area of each bolt is
25 mm
2
. A torque T = 200 N-m is acting on the joint. Neglecting friction due to clamping force,
maximum shear stress in a bolt is ______ MPa.
Q.39 Consider a fully developed steady laminar flow of an incompressible fluid with viscosity ? through
a circular pipe of radius R. Given that the velocity at a radial location of R/2 from the centerline of
the pipe is U
1
, the shear stress at the wall is K?U
1
/R, where K is __________
Q.40 The water jet exiting from a stationary tank through a circular opening of diameter 300 mm
impinges on a rigid wall as shown in the figure. Neglect all minor losses and assume the water level
in the tank to remain constant. The net horizontal force experienced by the wall
is ___________ kN.
Density of water is 1000 kg/m
3
.
Acceleration due to gravity g = 10 m/s
2
.
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 11/13
Q.41
For a two-dimensional flow, the velocity field is j
y x
y
i
y x
x
u
? ?
2 2 2 2
?
?
?
=
?
, where i
?
and j
?
are
the basis vectors in the x-y Cartesian coordinate system. Identify the CORRECT statements from
below.
(1) The flow is incompressible.
(2) The flow is unsteady.
(3) y-component of acceleration,
? ?
2
2 2
y x
y
a
y
?
?
=
(4) x-component of acceleration,
? ?
2
2 2
) (
y x
y x
a
x
?
? ?
=
(A) (2) and (3) (B) (1) and (3) (C) (1) and (2) (D) (3) and (4)
Q.42 Two large parallel plates having a gap of 10 mm in between them are maintained at temperatures
T
1
= 1000 K and T
2
= 400 K. Given emissivity values, ?? 1
= 0.5, ?? 2
= 0.25 and Stefan-Boltzmann
constant ? = 5.67 ? 10
?8
W/m
2
-K
4
, the heat transfer between the plates (in kW/m
2
) is __________
_________
Q.43 A cylindrical steel rod, 0.01 m in diameter and 0.2 m in length is first heated to 750
o
C and then
immersed in a water bath at 100
o
C. The heat transfer coefficient is 250 W/m
2
-K. The density,
specific heat and thermal conductivity of steel are ? = 7801 kg/m
3
, c = 473 J/kg-K, and
k = 43 W/m-K, respectively. The time required for the rod to reach 300
o
C is ________ seconds.
Q.44 Steam at an initial enthalpy of 100 kJ/kg and inlet velocity of 100 m/s, enters an insulated
horizontal nozzle. It leaves the nozzle at 200 m/s. The exit enthalpy (in kJ/kg) is __________
Q.45 In a mixture of dry air and water vapor at a total pressure of 750 mm of Hg, the partial pressure of
water vapor is 20 mm of Hg. The humidity ratio of the air in grams of water vapor per kg of dry air
(g
w
/kg
da
) is __________
Q.46 In a 3-stage air compressor, the inlet pressure is ?? 1
, discharge pressure is ?? 4
and the intermediate
pressures are ?? 2
and ?? 3
( ?? 2
< ?? 3
). The total pressure ratio of the compressor is 10 and the pressure
ratios of the stages are equal. If ?? 1
= 100 kPa, the value of the pressure ?? 3
(in kPa) is __________
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 12/13
Q.47 In the vapour compression cycle shown in the figure, the evaporating and condensing temperatures
are 260 K and 310 K, respectively. The compressor takes in liquid-vapour mixture (state 1) and
isentropically compresses it to a dry saturated vapour condition (state 2). The specific heat of the
liquid refrigerant is 4.8 kJ/kg-K and may be treated as constant. The enthalpy of evaporation for the
refrigerant at 310 K is 1054 kJ/kg.
The difference between the enthalpies at state points 1 and 0 (in kJ/kg) is ____________
Q.48 Spot welding of two steel sheets each 2 mm thick is carried out successfully by passing 4 kA of
current for 0.2 seconds through the electrodes. The resulting weld nugget formed between the
sheets is 5 mm in diameter. Assuming cylindrical shape for the nugget, the thickness of the nugget
is________mm.
Latent heat of fusion for steel 1400 kJ/kg
Effective resistance of the weld joint 200 ? ?
Density of steel 8000 kg/m
3
Q.49 For an orthogonal cutting operation, tool material is HSS, rake angle is 22?, chip thickness is
0.8 mm, speed is 48 m/min and feed is 0.4 mm/rev. The shear plane angle (in degrees) is
(A) 19.24 (B) 29.70 (C) 56.00 (D) 68.75
Q.50 In a sheet metal of 2 mm thickness a hole of 10 mm diameter needs to be punched. The yield
strength in tension of the sheet material is 100 MPa and its ultimate shear strength is 80 MPa. The
force required to punch the hole (in kN) is __________
Q.51 In a single point turning operation with cemented carbide tool and steel work piece, it is found that
the Taylor?s exponent is 0.25. If the cutting speed is reduced by 50% then the tool life changes by
______ times.
GATE 2016 SET-3 Mechanical Engineering (ME)
ME (Set-3) 13/13
Q.52 Two optically flat plates of glass are kept at a small angle ? as shown in the figure. Monochromatic
light is incident vertically.
If the wavelength of light used to get a fringe spacing of 1 mm is 450 nm, the wavelength of light
(in nm) to get a fringe spacing of 1.5 mm is _________
Q.53
A point P (1, 3, ?5) is translated by 2?? + 3?? ? 4??
and then rotated counter clockwise by 90 ? about
the z-axis. The new position of the point is
(A) (?6, 3, ?9) (B) (?6, ?3, ?9) (C) (6, 3, ?9) (D) (6, 3, 9)
Q.54 The demand for a two-wheeler was 900 units and 1030 units in April 2015 and May 2015,
respectively. The forecast for the month of April 2015 was 850 units. Considering a smoothing
constant of 0.6, the forecast for the month of June 2015 is
(A) 850 units (B) 927 units (C) 965 units (D) 970 units
Q.55 A firm uses a turning center, a milling center and a grinding machine to produce two parts. The
table below provides the machining time required for each part and the maximum machining time
available on each machine. The profit per unit on parts I and II are Rs. 40 and Rs. 100, respectively.
The maximum profit per week of the firm is Rs._________
Type of machine Machining time required for
the machine part (minutes)
Maximum machining time available
per week (minutes)
I II
Turning Center 12 6 6000
Milling Center 4 10 4000
Grinding Machine 2 3 1800
END OF THE QUESTION PAPER
FirstRanker.com - FirstRanker's Choice
This post was last modified on 18 December 2019