Download GTU BE/B.Tech 2019 Summer 4th Sem New 2141001 Microprocessor And Interfacing Question Paper

Download GTU (Gujarat Technological University) BE/BTech (Bachelor of Engineering / Bachelor of Technology) 2019 Summer 4th Sem New 2141001 Microprocessor And Interfacing Previous Question Paper

1
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?IV(NEW) ? EXAMINATION ? SUMMER 2019
Subject Code:2141001 Date:13/05/2019
Subject Name: Microprocessor and Interfacing
Time: 02:30 PM TO 05:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.



Q.1 (a) Draw and explain Flag register of 8085 Microprocessor. 03
(b) Explain de-multiplexing of lower order address bus and data bus. 04
(c) List out different machine cycles of 8085 microprocessor. Draw and
explain any two in detail.
07

Q.2 (a) Draw and explain the bus structure of 8085 microprocessor. 03
(b) Draw and explain schematic to generate Read/Write control signals for
memory and I/O.
04
(c) Explain the following instructions of 8085 microprocessor. 1) RLC 2)
STC 3) CPI 4) RET 5) PUSH 6) XRA 7) XCHG
07
OR
(c) Explain the following instructions of 8085 microprocessor. 1) RAL 2)
CMP 3) LXI 4) CMA 5) POP 6) JMP 7) CALL

07
Q.3 (a) List out Microprocessor initiated operations, internal operations and
peripheral or externally initiated operations.
03
(b) Design a delay loop to generate delay of 200msec. Assume clock
frequency of 8085 microprocessor is 2MHz.
04
(c) Draw a circuit to interface 4KB ROM and 2KB RAM using 3 to 8 line
decoder. Also compare Memory mapped I/O and I/O mapped I/O.
07
OR
Q.3 (a) MVI B, FFH
LOOP: DCR B
JNZ LOOP
Calculate the total time delay (or time taken) to execute the above
program. Consider clock frequency of the system as 2 MHz.
03
(b) List out and explain in brief Restart Instructions (RST0 to RST7) used
with INTR interrupt.
04
(c) Design a circuit to interface one 2KB EPROM and two 4KB RAMs.
Also compare Partial Decoding and Absolute Decoding.
07
Q.4 (a) Explain SIM and RIM instructions. 03
(b) Draw timing diagram of LDA instruction. 04
(c) Write a program to find negative numbers from the given array of
numbers. Store all negative numbers and positive numbers from 2050H
and 2060H onwards respectively. Store the count of each on C000H
and C001H.
07

OR
Q.4 (a) Explain the concept of stack memory with an example. 03
FirstRanker.com - FirstRanker's Choice
1
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?IV(NEW) ? EXAMINATION ? SUMMER 2019
Subject Code:2141001 Date:13/05/2019
Subject Name: Microprocessor and Interfacing
Time: 02:30 PM TO 05:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.



Q.1 (a) Draw and explain Flag register of 8085 Microprocessor. 03
(b) Explain de-multiplexing of lower order address bus and data bus. 04
(c) List out different machine cycles of 8085 microprocessor. Draw and
explain any two in detail.
07

Q.2 (a) Draw and explain the bus structure of 8085 microprocessor. 03
(b) Draw and explain schematic to generate Read/Write control signals for
memory and I/O.
04
(c) Explain the following instructions of 8085 microprocessor. 1) RLC 2)
STC 3) CPI 4) RET 5) PUSH 6) XRA 7) XCHG
07
OR
(c) Explain the following instructions of 8085 microprocessor. 1) RAL 2)
CMP 3) LXI 4) CMA 5) POP 6) JMP 7) CALL

07
Q.3 (a) List out Microprocessor initiated operations, internal operations and
peripheral or externally initiated operations.
03
(b) Design a delay loop to generate delay of 200msec. Assume clock
frequency of 8085 microprocessor is 2MHz.
04
(c) Draw a circuit to interface 4KB ROM and 2KB RAM using 3 to 8 line
decoder. Also compare Memory mapped I/O and I/O mapped I/O.
07
OR
Q.3 (a) MVI B, FFH
LOOP: DCR B
JNZ LOOP
Calculate the total time delay (or time taken) to execute the above
program. Consider clock frequency of the system as 2 MHz.
03
(b) List out and explain in brief Restart Instructions (RST0 to RST7) used
with INTR interrupt.
04
(c) Design a circuit to interface one 2KB EPROM and two 4KB RAMs.
Also compare Partial Decoding and Absolute Decoding.
07
Q.4 (a) Explain SIM and RIM instructions. 03
(b) Draw timing diagram of LDA instruction. 04
(c) Write a program to find negative numbers from the given array of
numbers. Store all negative numbers and positive numbers from 2050H
and 2060H onwards respectively. Store the count of each on C000H
and C001H.
07

OR
Q.4 (a) Explain the concept of stack memory with an example. 03
2
(b) Compare different types of Interrupts in 8085. 04
(c) Write a program to arrange given numbers in ascending order.

07
Q.5 (a) Draw architecture of 8086 microprocessor. 03
(b) Draw and explain 8259 Programmable Interrupt Controller IC. 04
(c) Draw and explain block diagram, control word and modes of 8255
Programmable Peripheral Interface IC.
07
OR

Q.5 (a) Give an overview of Advance microprocessors. 03
(b) Explain Addressing modes of 8086 microprocessor. 04
(c) Draw and explain Programmable Interval Timer IC 8253 in detail. 07

*************
FirstRanker.com - FirstRanker's Choice