Download PTU B.Tech 2020 March EE 7th and 8th Sem Embedded Systems Question Paper

Download PTU (I.K. Gujral Punjab Technical University Jalandhar (IKGPTU) ) BE/BTech EE (Electrical Engineering) 2020 March 7th and 8th Sem Embedded Systems Previous Question Paper

1 | M - 7 1 9 4 6 ( S 2 ) - 2 0 3 0
Roll No. Total No. of Pages : 02
Total No. of Questions : 09
B.Tech. (EE) (2012 Onwards E-III) (Sem.?7)
EMBEDDED SYSTEMS
Subject Code : BTEE-805E
M.Code : 71946
Time : 3 Hrs. Max. Marks : 60
INSTRUCTION TO CANDIDATES :
1. SECTION-A is COMPULSORY consisting of TEN questions carrying TWO marks
each.
2. SECTION-B contains FIVE questions carrying FIVE marks each and students
have to attempt any FOUR questions.
3. SECTION-C contains THREE questions carrying TEN marks each and students
have to attempt any TWO questions.

SECTION-A
1. Answer briefly :
a. Perform Hex addition for the following :
i) 2CH+3FH ii) F34H+5D6H
b. What are the main features of microcontrollers?
c. What are the different addressing modes of 8085 microprocessor?
d. How is the status of the carry, auxiliary carry and parity flag affected if write the
following instructions?
MOVA,#9C
ADD A,#64H
e. What are the factors which are to be considered for choosing PIC device?
f. Show the status register format in PIC micro controller.
g. What are Task Scheduling Rules?
h. Define Debugging.
i. How does the scheduler know when a task has become blocked or unblocked?
j. What are simulators?

FirstRanker.com - FirstRanker's Choice
1 | M - 7 1 9 4 6 ( S 2 ) - 2 0 3 0
Roll No. Total No. of Pages : 02
Total No. of Questions : 09
B.Tech. (EE) (2012 Onwards E-III) (Sem.?7)
EMBEDDED SYSTEMS
Subject Code : BTEE-805E
M.Code : 71946
Time : 3 Hrs. Max. Marks : 60
INSTRUCTION TO CANDIDATES :
1. SECTION-A is COMPULSORY consisting of TEN questions carrying TWO marks
each.
2. SECTION-B contains FIVE questions carrying FIVE marks each and students
have to attempt any FOUR questions.
3. SECTION-C contains THREE questions carrying TEN marks each and students
have to attempt any TWO questions.

SECTION-A
1. Answer briefly :
a. Perform Hex addition for the following :
i) 2CH+3FH ii) F34H+5D6H
b. What are the main features of microcontrollers?
c. What are the different addressing modes of 8085 microprocessor?
d. How is the status of the carry, auxiliary carry and parity flag affected if write the
following instructions?
MOVA,#9C
ADD A,#64H
e. What are the factors which are to be considered for choosing PIC device?
f. Show the status register format in PIC micro controller.
g. What are Task Scheduling Rules?
h. Define Debugging.
i. How does the scheduler know when a task has become blocked or unblocked?
j. What are simulators?

2 | M - 7 1 9 4 6 ( S 2 ) - 2 0 3 0
SECTION-B
2. Write a program finding the largest number in an array of 8085. Write instruction to load
the 16 bit number 2050H in the register pair HL using LXI and MVI opcodes, and
explain the difference between the two instructions.
3. Explain general architecture of PIC microcontrollers. What are the advantages and
disadvantages of PIC microcontrollers?
4. Explain in detail Real Time Operating Systems (RTOS)? What is the meaning of tasks in
RTOS? Also write in detail different types of tasks in RTOS.
5. Write short notes with proper diagrams on :
a. Serial I/O devices
b. Analog Interfacing with micro controllers
6. What are vectored interrupts? A program is stored in memory from 2000H to 2009H
location.
a. 2000H LXI,SP, 1000H
b. 2003H PUSH H
c. 2004H PUSH D
d. 2005H CALL 2050H
e. 2008H POP H
f. 2009H HLT
i) What will be the contents of PC after execution of step 4.
ii) What will be the contents of SP after execution of step 4.
iii) Specify the contents of SP after execution of step.
SECTION-C
7. Draw and explain the pin diagram of 8085microprocessor. Explain the function of
registers used in 8085 microprocessor.
8. What are assembler directives? What do you mean by compiler and cross compiler?
Discuss function scheduling architecture of embedded systems.
9. What are the functions of timers in RTOS? How memory is managed in RTOS? Explain
the interrupt routines in RTOS environment.

NOTE : Disclosure of Identity by writing Mobile No. or Making of passing request on any
page of Answer Sheet will lead to UMC against the Student.
FirstRanker.com - FirstRanker's Choice

This post was last modified on 21 March 2020