Download AKTU B-Tech 6th Sem 2018-2019 REC062 Microcontroller For Embedded Systems Question Paper

Download AKTU (Dr. A.P.J. Abdul Kalam Technical University (AKTU), formerly Uttar Pradesh Technical University (UPTU) B-Tech 6th Semester (Sixth Semester) 2018-2019 REC062 Microcontroller For Embedded Systems Question Paper

Printed Pa es: 2 Sub Code: REC062
Paper Id: 131295 Roll No.
B.TECH
(SEM VI) THEORY EXAMINATION 2018-19
MICROCONTROLLER FOR EMBEDDED SYSTEMS
T ime: 3 Hours T and Marks: 70
Note: 1. Attempt all Sections. If you require any missing data, choose suitably.
SECTION A
Attempt all questions in brief. 2 x 7 = 14
a. In accessing external stored program code the PSEN is always activated,
explain why?
b. Which port of 805 1 provides A8?A15?
0. Compare 8051 and MSP430X5XXX main features.
(1. Write down any four GPIO registers of MSP430.
e. What is RTC?
f. Differentiate between Synchronous and Asynchronous communication.
g. What is an Embedded Wi-Fi?
SECTION B
Attempt any three of the following: 7 x 3 = 21
a. Generate a square wave with an ON time of 2ms and OFF time of 8 ms on all
pins of port 0. Assume that the clock frequency supplied is 22 MHz.
b. Explain in detail about the interrupts of MSP430 microcontroller.
0. Explain in detail about various operating modes of MSP430 microcontroller.
(1. Explain UART and its various protocols in detail.
e. Describe wireless sensor networks with design examples.
SECTION C
Attempt any one part of the following: 7 x 1 = 7
(a) Draw the architecture of 8051 and explain its memory organization.
(b) Enlist the steps to generate a time delay using the timer?s mode 2. Also draw
the structure of TMOD register.
Attempt any one part of the following: 7 x 1 = 7
(a) Draw the functional block diagram of MSP430X5X series. Discuss the on-chip
peripherals that are provided in MSP430X5X series.
(b) Describe the Instruction set of MSP430 microcontroller.
Attempt any one part of the following: 7 x 1 = 7
(a) What are the system clocks present in the MSP430 microcontroller? Explain
them brie?y.
(b) Discuss the Watch Dog Timer present in MSP430 microcontroller in detail.

6. Attempt any one part of the following: 7 x 1 = 7
(a) Interface MSP430 to an external device using SP1 protocol.
(b) Write a program using MSP430X5XX to toggle two LED connected at port P15
and P1.7 use a pull down switch connected at port P1.2 for toggling these LED.
7. Attempt any one part of the following: 7 x 1 = 7
(a) What is IoT? Draw the architecture of IOT and list its applications.
(b) Explain brie?y Bluetooth and ZigBee.