Download JNTUA (JNTU Anantapur) B.Tech R15 (Bachelor of Technology) 1st Year 1st Semester (1-1) 2016 Dec Regular 15A03101a Engineering Drawing Previous Question Paper || Download B-Tech 1st Year 1st Sem 15A03101a Engineering Drawing Question Paper || JNTU Anantapur B.Tech R15 1-1 Previous Question Paper || JNTU Anantapur B.Tech ME 1-1 Previous Question Paper || JNTU Anantapur B.Tech CSE 1-1 Previous Question Paper || JNTU Anantapur B.Tech Mech 1-1 Previous Question Paper || JNTU Anantapur B.Tech EEE 1-1 Previous Question Paper || JNTU Anantapur B.Tech ECE 1-1 Previous Question Paper

Code: 15A03101a

B.Tech I Year I Semester (R15) Regular & Supplementary Examinations December 2016

ENGINEERING DRAWING

(Common to CE and EEE)

Time: 3 hours Max. Marks: 70

(Answer all five units, 05 X 14 = 70 Marks)

(All dimensions are in mm unless otherwise specified)

UNIT - I

1 The vertex of a hyperbola is 65 mm from its focus. Draw the curve if the eccentricity is 3/2. Draw a normal

and tangent to the curve at a point on it 70 mm from the directrix.

OR

2 A circle of 50 mm diameter rolls on the circumference of another circle of 175 mm diameter outside it.

Trace the locus of a point on the circumference of the rolling circle for one complete revolution. Name the

curve. Draw a tangent and normal to the curve at a point 125 mm the centre of the directing circle.

UNIT - II

3 Construct a scale to be used with a map, the scale of which is 1 cm = 40 m. The scale should read in

meters up to 500 m. Mark on the scale a distance of 456 m.

OR

4 (a) A point P is 15 above the HP and 20 in front of the V.P. Another point Q is 25 behind the V.P and

40 below the H.P. Draw the projections of P and Q keeping the distance between the projectors equal to

90. Draw straight lines joining: (i) Their top views. (ii) Their front views.

(b) Two points A and B are in the H.P. The point A is 30 in front of the V.P, while B is behind the V.P. The

distance between their projections is 75 and the line joining their top views makes an angle of 45 with xy.

Find the distance of the point B, from the V.P.

UNIT ? III

5 A line AB, 90 long, is inclined at 45 to the H.P and its top view makes an angle of 60 with xy. The end A

is in the H.P and 15 in front of the V.P. Draw its front view and find its true inclination with the V.P.

OR

6 Draw the projections of a rhombus having diagonals 120 and 50 long, the smaller diagonal of which is

parallel to both the principal planes, while the other is inclined at 30 to the V.P.

UNIT ? IV

7 A tetrahedron of 75 edges has one edge on the ground and inclined at 45 to the V.P, while the face

containing the edge is vertical. Draw its projections.

OR

8 A pentagonal prism 20 side of base and 45 height stands vertically on its base with two of its rectangular

faces equally inclined to the V.P. Develop the lateral surface of the prism.

Contd. in page 2

Page 1 of 2

R15

FirstRanker.com - FirstRanker's Choice

Code: 15A03101a

B.Tech I Year I Semester (R15) Regular & Supplementary Examinations December 2016

ENGINEERING DRAWING

(Common to CE and EEE)

Time: 3 hours Max. Marks: 70

(Answer all five units, 05 X 14 = 70 Marks)

(All dimensions are in mm unless otherwise specified)

UNIT - I

1 The vertex of a hyperbola is 65 mm from its focus. Draw the curve if the eccentricity is 3/2. Draw a normal

and tangent to the curve at a point on it 70 mm from the directrix.

OR

2 A circle of 50 mm diameter rolls on the circumference of another circle of 175 mm diameter outside it.

Trace the locus of a point on the circumference of the rolling circle for one complete revolution. Name the

curve. Draw a tangent and normal to the curve at a point 125 mm the centre of the directing circle.

UNIT - II

3 Construct a scale to be used with a map, the scale of which is 1 cm = 40 m. The scale should read in

meters up to 500 m. Mark on the scale a distance of 456 m.

OR

4 (a) A point P is 15 above the HP and 20 in front of the V.P. Another point Q is 25 behind the V.P and

40 below the H.P. Draw the projections of P and Q keeping the distance between the projectors equal to

90. Draw straight lines joining: (i) Their top views. (ii) Their front views.

(b) Two points A and B are in the H.P. The point A is 30 in front of the V.P, while B is behind the V.P. The

distance between their projections is 75 and the line joining their top views makes an angle of 45 with xy.

Find the distance of the point B, from the V.P.

UNIT ? III

5 A line AB, 90 long, is inclined at 45 to the H.P and its top view makes an angle of 60 with xy. The end A

is in the H.P and 15 in front of the V.P. Draw its front view and find its true inclination with the V.P.

OR

6 Draw the projections of a rhombus having diagonals 120 and 50 long, the smaller diagonal of which is

parallel to both the principal planes, while the other is inclined at 30 to the V.P.

UNIT ? IV

7 A tetrahedron of 75 edges has one edge on the ground and inclined at 45 to the V.P, while the face

containing the edge is vertical. Draw its projections.

OR

8 A pentagonal prism 20 side of base and 45 height stands vertically on its base with two of its rectangular

faces equally inclined to the V.P. Develop the lateral surface of the prism.

Contd. in page 2

Page 1 of 2

R15

Code: 15A03101a

UNIT - V

9 A paper weight consists of three portions. The bottom most portion is a cylinder of 60 diameter and

15 height. On it is situated a frustum of a cone of height 30 and bottom diameter 60 and top diameter 30.

The top portion is a sphere of diameter 30 centrally placed on the circle. Draw the isometric projection of

the same.

OR

10 Draw the front view and top view for the object shown in the figure below.

*****

Page 2 of 2

R15

FirstRanker.com - FirstRanker's Choice

This post was last modified on 11 September 2020