Download Anna University B-Tech ECE 7th Sem Embedded Lab Manual Question Paper

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION


FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry

--- Content provided by FirstRanker.com ---

? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

--- Content provided by FirstRanker.com ---

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,

--- Content provided by FirstRanker.com ---

innovation and ethical practices
VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals

--- Content provided by FirstRanker.com ---

To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their

--- Content provided by FirstRanker.com ---

knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products

--- Content provided by FirstRanker.com ---

4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics

--- Content provided by FirstRanker.com ---

To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface

--- Content provided by FirstRanker.com ---

? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system

--- Content provided by FirstRanker.com ---

2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt

--- Content provided by FirstRanker.com ---

7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations

--- Content provided by FirstRanker.com ---

? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES

--- Content provided by FirstRanker.com ---

COURSE OUTCOMES


FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface

--- Content provided by FirstRanker.com ---

? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system

--- Content provided by FirstRanker.com ---

2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt

--- Content provided by FirstRanker.com ---

7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations

--- Content provided by FirstRanker.com ---

? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES

--- Content provided by FirstRanker.com ---

COURSE OUTCOMES



6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3

--- Content provided by FirstRanker.com ---

Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25

--- Content provided by FirstRanker.com ---

6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47

--- Content provided by FirstRanker.com ---

13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS

--- Content provided by FirstRanker.com ---

14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components

--- Content provided by FirstRanker.com ---

required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad

--- Content provided by FirstRanker.com ---

computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been

--- Content provided by FirstRanker.com ---

produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set

--- Content provided by FirstRanker.com ---

architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface

--- Content provided by FirstRanker.com ---

? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system

--- Content provided by FirstRanker.com ---

2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt

--- Content provided by FirstRanker.com ---

7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations

--- Content provided by FirstRanker.com ---

? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES

--- Content provided by FirstRanker.com ---

COURSE OUTCOMES



6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3

--- Content provided by FirstRanker.com ---

Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25

--- Content provided by FirstRanker.com ---

6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47

--- Content provided by FirstRanker.com ---

13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS

--- Content provided by FirstRanker.com ---

14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components

--- Content provided by FirstRanker.com ---

required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad

--- Content provided by FirstRanker.com ---

computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been

--- Content provided by FirstRanker.com ---

produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set

--- Content provided by FirstRanker.com ---

architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:

--- Content provided by FirstRanker.com ---

1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real

--- Content provided by FirstRanker.com ---

Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.

--- Content provided by FirstRanker.com ---

6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with

--- Content provided by FirstRanker.com ---

buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with

--- Content provided by FirstRanker.com ---

an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or

--- Content provided by FirstRanker.com ---

Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:

--- Content provided by FirstRanker.com ---

1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator

--- Content provided by FirstRanker.com ---

6. UART


FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________

--- Content provided by FirstRanker.com ---

Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and

--- Content provided by FirstRanker.com ---

training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels

--- Content provided by FirstRanker.com ---

? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to

--- Content provided by FirstRanker.com ---

shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry

--- Content provided by FirstRanker.com ---

? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION

--- Content provided by FirstRanker.com ---

VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge

--- Content provided by FirstRanker.com ---

to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions

--- Content provided by FirstRanker.com ---

3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in

--- Content provided by FirstRanker.com ---

the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field

--- Content provided by FirstRanker.com ---

b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems

--- Content provided by FirstRanker.com ---

e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility

--- Content provided by FirstRanker.com ---

i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems

--- Content provided by FirstRanker.com ---

? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:

--- Content provided by FirstRanker.com ---

1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD

--- Content provided by FirstRanker.com ---

6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor

--- Content provided by FirstRanker.com ---

11. Implementing zigbee protocol with ARM



? Write programs in ARM for a specific Application

--- Content provided by FirstRanker.com ---

? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system

--- Content provided by FirstRanker.com ---

COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.

--- Content provided by FirstRanker.com ---

CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16

--- Content provided by FirstRanker.com ---

3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5

--- Content provided by FirstRanker.com ---

Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31

--- Content provided by FirstRanker.com ---

CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43

--- Content provided by FirstRanker.com ---

12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:

--- Content provided by FirstRanker.com ---

To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These

--- Content provided by FirstRanker.com ---

are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power

--- Content provided by FirstRanker.com ---

consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital

--- Content provided by FirstRanker.com ---

televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high

--- Content provided by FirstRanker.com ---

end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.

--- Content provided by FirstRanker.com ---

3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with

--- Content provided by FirstRanker.com ---

conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.

--- Content provided by FirstRanker.com ---

9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.

--- Content provided by FirstRanker.com ---

13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.

--- Content provided by FirstRanker.com ---

16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit

--- Content provided by FirstRanker.com ---

5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted

--- Content provided by FirstRanker.com ---

into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.

--- Content provided by FirstRanker.com ---

Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________

--- Content provided by FirstRanker.com ---

Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and

--- Content provided by FirstRanker.com ---

training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels

--- Content provided by FirstRanker.com ---

? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to

--- Content provided by FirstRanker.com ---

shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry

--- Content provided by FirstRanker.com ---

? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION

--- Content provided by FirstRanker.com ---

VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge

--- Content provided by FirstRanker.com ---

to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions

--- Content provided by FirstRanker.com ---

3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in

--- Content provided by FirstRanker.com ---

the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field

--- Content provided by FirstRanker.com ---

b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems

--- Content provided by FirstRanker.com ---

e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility

--- Content provided by FirstRanker.com ---

i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems

--- Content provided by FirstRanker.com ---

? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:

--- Content provided by FirstRanker.com ---

1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD

--- Content provided by FirstRanker.com ---

6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor

--- Content provided by FirstRanker.com ---

11. Implementing zigbee protocol with ARM



? Write programs in ARM for a specific Application

--- Content provided by FirstRanker.com ---

? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system

--- Content provided by FirstRanker.com ---

COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.

--- Content provided by FirstRanker.com ---

CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16

--- Content provided by FirstRanker.com ---

3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5

--- Content provided by FirstRanker.com ---

Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31

--- Content provided by FirstRanker.com ---

CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43

--- Content provided by FirstRanker.com ---

12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:

--- Content provided by FirstRanker.com ---

To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These

--- Content provided by FirstRanker.com ---

are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power

--- Content provided by FirstRanker.com ---

consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital

--- Content provided by FirstRanker.com ---

televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high

--- Content provided by FirstRanker.com ---

end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.

--- Content provided by FirstRanker.com ---

3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with

--- Content provided by FirstRanker.com ---

conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.

--- Content provided by FirstRanker.com ---

9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.

--- Content provided by FirstRanker.com ---

13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.

--- Content provided by FirstRanker.com ---

16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit

--- Content provided by FirstRanker.com ---

5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted

--- Content provided by FirstRanker.com ---

into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.

--- Content provided by FirstRanker.com ---

Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?



DEPARTMENT OF

--- Content provided by FirstRanker.com ---

ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul

--- Content provided by FirstRanker.com ---

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

--- Content provided by FirstRanker.com ---

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems

--- Content provided by FirstRanker.com ---

? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION
MISSION

--- Content provided by FirstRanker.com ---

MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)

--- Content provided by FirstRanker.com ---

1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence

--- Content provided by FirstRanker.com ---

To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which

--- Content provided by FirstRanker.com ---

enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context

--- Content provided by FirstRanker.com ---

5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability

--- Content provided by FirstRanker.com ---

c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities

--- Content provided by FirstRanker.com ---

g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning

--- Content provided by FirstRanker.com ---

k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

--- Content provided by FirstRanker.com ---

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems

--- Content provided by FirstRanker.com ---

? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC

--- Content provided by FirstRanker.com ---

3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox

--- Content provided by FirstRanker.com ---

8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system

--- Content provided by FirstRanker.com ---

? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1

--- Content provided by FirstRanker.com ---

Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19

--- Content provided by FirstRanker.com ---

4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25
6

--- Content provided by FirstRanker.com ---

Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35

--- Content provided by FirstRanker.com ---

9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13

--- Content provided by FirstRanker.com ---

Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54

--- Content provided by FirstRanker.com ---

15 Relay interface with ARM? 7 57



7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.

--- Content provided by FirstRanker.com ---

Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and

--- Content provided by FirstRanker.com ---

higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used

--- Content provided by FirstRanker.com ---

architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.

--- Content provided by FirstRanker.com ---

LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide

--- Content provided by FirstRanker.com ---

interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.

--- Content provided by FirstRanker.com ---

4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.

--- Content provided by FirstRanker.com ---

7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.

--- Content provided by FirstRanker.com ---

10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz

--- Content provided by FirstRanker.com ---

14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly

--- Content provided by FirstRanker.com ---

2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

--- Content provided by FirstRanker.com ---

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.

--- Content provided by FirstRanker.com ---

Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

--- Content provided by FirstRanker.com ---

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?
Reset Circuit:

--- Content provided by FirstRanker.com ---

Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Recommended values are as shown in table:

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial

--- Content provided by FirstRanker.com ---

communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface

--- Content provided by FirstRanker.com ---

? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system

--- Content provided by FirstRanker.com ---

2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt

--- Content provided by FirstRanker.com ---

7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations

--- Content provided by FirstRanker.com ---

? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES

--- Content provided by FirstRanker.com ---

COURSE OUTCOMES



6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3

--- Content provided by FirstRanker.com ---

Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25

--- Content provided by FirstRanker.com ---

6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47

--- Content provided by FirstRanker.com ---

13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS

--- Content provided by FirstRanker.com ---

14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components

--- Content provided by FirstRanker.com ---

required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad

--- Content provided by FirstRanker.com ---

computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been

--- Content provided by FirstRanker.com ---

produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set

--- Content provided by FirstRanker.com ---

architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:

--- Content provided by FirstRanker.com ---

1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real

--- Content provided by FirstRanker.com ---

Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.

--- Content provided by FirstRanker.com ---

6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with

--- Content provided by FirstRanker.com ---

buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with

--- Content provided by FirstRanker.com ---

an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or

--- Content provided by FirstRanker.com ---

Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:

--- Content provided by FirstRanker.com ---

1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator

--- Content provided by FirstRanker.com ---

6. UART



10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.

--- Content provided by FirstRanker.com ---

Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.

--- Content provided by FirstRanker.com ---

Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?

--- Content provided by FirstRanker.com ---

Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

UART:

--- Content provided by FirstRanker.com ---

LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup

--- Content provided by FirstRanker.com ---

required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers

--- Content provided by FirstRanker.com ---

4. Digital TV
5. Home Gateways


1. What are the basic units of ARM 7?

--- Content provided by FirstRanker.com ---

2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?

--- Content provided by FirstRanker.com ---

7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt

--- Content provided by FirstRanker.com ---

12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?

--- Content provided by FirstRanker.com ---

Viva-voce



FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry

--- Content provided by FirstRanker.com ---

? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

--- Content provided by FirstRanker.com ---

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,

--- Content provided by FirstRanker.com ---

innovation and ethical practices
VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals

--- Content provided by FirstRanker.com ---

To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their

--- Content provided by FirstRanker.com ---

knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products

--- Content provided by FirstRanker.com ---

4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics

--- Content provided by FirstRanker.com ---

To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)

--- Content provided by FirstRanker.com ---

a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics

--- Content provided by FirstRanker.com ---

and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large

--- Content provided by FirstRanker.com ---

h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

--- Content provided by FirstRanker.com ---

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor

--- Content provided by FirstRanker.com ---

? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM

--- Content provided by FirstRanker.com ---

4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA

--- Content provided by FirstRanker.com ---

9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt

--- Content provided by FirstRanker.com ---

? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7

--- Content provided by FirstRanker.com ---

2
Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4

--- Content provided by FirstRanker.com ---

LED dimming using PWM 22
5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28

--- Content provided by FirstRanker.com ---

7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37

--- Content provided by FirstRanker.com ---

10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless

--- Content provided by FirstRanker.com ---

Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:

--- Content provided by FirstRanker.com ---

A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for

--- Content provided by FirstRanker.com ---

servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.

--- Content provided by FirstRanker.com ---

According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:

--- Content provided by FirstRanker.com ---

LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.

--- Content provided by FirstRanker.com ---

2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8

--- Content provided by FirstRanker.com ---

provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit

--- Content provided by FirstRanker.com ---

(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.

--- Content provided by FirstRanker.com ---

11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.

--- Content provided by FirstRanker.com ---

15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:

--- Content provided by FirstRanker.com ---

Pin configuration of LPC 2148.

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply

--- Content provided by FirstRanker.com ---

3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:

--- Content provided by FirstRanker.com ---

LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

--- Content provided by FirstRanker.com ---

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.

--- Content provided by FirstRanker.com ---

LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

--- Content provided by FirstRanker.com ---

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system

--- Content provided by FirstRanker.com ---

to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Recommended values are as shown in table:

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for

--- Content provided by FirstRanker.com ---

voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:

--- Content provided by FirstRanker.com ---

1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as

--- Content provided by FirstRanker.com ---

1. Smart phones
2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC

--- Content provided by FirstRanker.com ---

4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining

--- Content provided by FirstRanker.com ---

9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?

--- Content provided by FirstRanker.com ---

14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from

--- Content provided by FirstRanker.com ---

instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into

--- Content provided by FirstRanker.com ---

Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC

--- Content provided by FirstRanker.com ---

input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?



DEPARTMENT OF

--- Content provided by FirstRanker.com ---

ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul

--- Content provided by FirstRanker.com ---

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

--- Content provided by FirstRanker.com ---

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems

--- Content provided by FirstRanker.com ---

? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION
MISSION

--- Content provided by FirstRanker.com ---

MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)

--- Content provided by FirstRanker.com ---

1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence

--- Content provided by FirstRanker.com ---

To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which

--- Content provided by FirstRanker.com ---

enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context

--- Content provided by FirstRanker.com ---

5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability

--- Content provided by FirstRanker.com ---

c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities

--- Content provided by FirstRanker.com ---

g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning

--- Content provided by FirstRanker.com ---

k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

--- Content provided by FirstRanker.com ---

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems

--- Content provided by FirstRanker.com ---

? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC

--- Content provided by FirstRanker.com ---

3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox

--- Content provided by FirstRanker.com ---

8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system

--- Content provided by FirstRanker.com ---

? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1

--- Content provided by FirstRanker.com ---

Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19

--- Content provided by FirstRanker.com ---

4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25
6

--- Content provided by FirstRanker.com ---

Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35

--- Content provided by FirstRanker.com ---

9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13

--- Content provided by FirstRanker.com ---

Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54

--- Content provided by FirstRanker.com ---

15 Relay interface with ARM? 7 57



7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.

--- Content provided by FirstRanker.com ---

Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and

--- Content provided by FirstRanker.com ---

higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used

--- Content provided by FirstRanker.com ---

architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.

--- Content provided by FirstRanker.com ---

LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide

--- Content provided by FirstRanker.com ---

interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.

--- Content provided by FirstRanker.com ---

4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.

--- Content provided by FirstRanker.com ---

7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.

--- Content provided by FirstRanker.com ---

10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz

--- Content provided by FirstRanker.com ---

14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly

--- Content provided by FirstRanker.com ---

2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

--- Content provided by FirstRanker.com ---

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.

--- Content provided by FirstRanker.com ---

Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

--- Content provided by FirstRanker.com ---

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?
Reset Circuit:

--- Content provided by FirstRanker.com ---

Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Recommended values are as shown in table:

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial

--- Content provided by FirstRanker.com ---

communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.

--- Content provided by FirstRanker.com ---

Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

Applications:

--- Content provided by FirstRanker.com ---

ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers
4. Digital TV

--- Content provided by FirstRanker.com ---

5. Home Gateways


1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?

--- Content provided by FirstRanker.com ---

3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?

--- Content provided by FirstRanker.com ---

8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?

--- Content provided by FirstRanker.com ---

13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR

--- Content provided by FirstRanker.com ---

INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the

--- Content provided by FirstRanker.com ---

moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully

--- Content provided by FirstRanker.com ---

accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface

--- Content provided by FirstRanker.com ---

? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system

--- Content provided by FirstRanker.com ---

2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt

--- Content provided by FirstRanker.com ---

7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations

--- Content provided by FirstRanker.com ---

? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES

--- Content provided by FirstRanker.com ---

COURSE OUTCOMES



6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3

--- Content provided by FirstRanker.com ---

Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25

--- Content provided by FirstRanker.com ---

6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47

--- Content provided by FirstRanker.com ---

13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS

--- Content provided by FirstRanker.com ---

14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components

--- Content provided by FirstRanker.com ---

required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad

--- Content provided by FirstRanker.com ---

computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been

--- Content provided by FirstRanker.com ---

produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set

--- Content provided by FirstRanker.com ---

architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:

--- Content provided by FirstRanker.com ---

1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real

--- Content provided by FirstRanker.com ---

Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.

--- Content provided by FirstRanker.com ---

6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with

--- Content provided by FirstRanker.com ---

buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with

--- Content provided by FirstRanker.com ---

an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or

--- Content provided by FirstRanker.com ---

Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:

--- Content provided by FirstRanker.com ---

1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator

--- Content provided by FirstRanker.com ---

6. UART



10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.

--- Content provided by FirstRanker.com ---

Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.

--- Content provided by FirstRanker.com ---

Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?

--- Content provided by FirstRanker.com ---

Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

UART:

--- Content provided by FirstRanker.com ---

LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup

--- Content provided by FirstRanker.com ---

required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers

--- Content provided by FirstRanker.com ---

4. Digital TV
5. Home Gateways


1. What are the basic units of ARM 7?

--- Content provided by FirstRanker.com ---

2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?

--- Content provided by FirstRanker.com ---

7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt

--- Content provided by FirstRanker.com ---

12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete

--- Content provided by FirstRanker.com ---

digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to

--- Content provided by FirstRanker.com ---

scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards

--- Content provided by FirstRanker.com ---

3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?

--- Content provided by FirstRanker.com ---

6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?

--- Content provided by FirstRanker.com ---

11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface

--- Content provided by FirstRanker.com ---

? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system

--- Content provided by FirstRanker.com ---

2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt

--- Content provided by FirstRanker.com ---

7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations

--- Content provided by FirstRanker.com ---

? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES

--- Content provided by FirstRanker.com ---

COURSE OUTCOMES



6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3

--- Content provided by FirstRanker.com ---

Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25

--- Content provided by FirstRanker.com ---

6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47

--- Content provided by FirstRanker.com ---

13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS

--- Content provided by FirstRanker.com ---

14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components

--- Content provided by FirstRanker.com ---

required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad

--- Content provided by FirstRanker.com ---

computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been

--- Content provided by FirstRanker.com ---

produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set

--- Content provided by FirstRanker.com ---

architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:

--- Content provided by FirstRanker.com ---

1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real

--- Content provided by FirstRanker.com ---

Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.

--- Content provided by FirstRanker.com ---

6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with

--- Content provided by FirstRanker.com ---

buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with

--- Content provided by FirstRanker.com ---

an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or

--- Content provided by FirstRanker.com ---

Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:

--- Content provided by FirstRanker.com ---

1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator

--- Content provided by FirstRanker.com ---

6. UART



10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.

--- Content provided by FirstRanker.com ---

Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.

--- Content provided by FirstRanker.com ---

Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?

--- Content provided by FirstRanker.com ---

Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

UART:

--- Content provided by FirstRanker.com ---

LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup

--- Content provided by FirstRanker.com ---

required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers

--- Content provided by FirstRanker.com ---

4. Digital TV
5. Home Gateways


1. What are the basic units of ARM 7?

--- Content provided by FirstRanker.com ---

2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?

--- Content provided by FirstRanker.com ---

7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt

--- Content provided by FirstRanker.com ---

12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete

--- Content provided by FirstRanker.com ---

digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to

--- Content provided by FirstRanker.com ---

scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards

--- Content provided by FirstRanker.com ---

3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?

--- Content provided by FirstRanker.com ---

6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?

--- Content provided by FirstRanker.com ---

11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog

--- Content provided by FirstRanker.com ---

real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection

--- Content provided by FirstRanker.com ---

there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the

--- Content provided by FirstRanker.com ---

master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any

--- Content provided by FirstRanker.com ---

unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the


FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.

--- Content provided by FirstRanker.com ---

2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones

--- Content provided by FirstRanker.com ---

2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?

--- Content provided by FirstRanker.com ---

5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?

--- Content provided by FirstRanker.com ---

10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?

--- Content provided by FirstRanker.com ---

15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the

--- Content provided by FirstRanker.com ---

computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.

--- Content provided by FirstRanker.com ---

The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function

--- Content provided by FirstRanker.com ---

Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and

--- Content provided by FirstRanker.com ---

executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:

--- Content provided by FirstRanker.com ---

1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?

--- Content provided by FirstRanker.com ---

4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?

--- Content provided by FirstRanker.com ---

9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE

--- Content provided by FirstRanker.com ---

WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter

--- Content provided by FirstRanker.com ---

(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,

--- Content provided by FirstRanker.com ---

Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores

--- Content provided by FirstRanker.com ---

the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.

--- Content provided by FirstRanker.com ---

2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones

--- Content provided by FirstRanker.com ---

2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?

--- Content provided by FirstRanker.com ---

5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?

--- Content provided by FirstRanker.com ---

10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?

--- Content provided by FirstRanker.com ---

15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the

--- Content provided by FirstRanker.com ---

computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.

--- Content provided by FirstRanker.com ---

The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function

--- Content provided by FirstRanker.com ---

Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and

--- Content provided by FirstRanker.com ---

executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:

--- Content provided by FirstRanker.com ---

1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?

--- Content provided by FirstRanker.com ---

4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?

--- Content provided by FirstRanker.com ---

9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE

--- Content provided by FirstRanker.com ---

WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter

--- Content provided by FirstRanker.com ---

(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,

--- Content provided by FirstRanker.com ---

Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores

--- Content provided by FirstRanker.com ---

the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :

--- Content provided by FirstRanker.com ---

1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?

--- Content provided by FirstRanker.com ---

3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-

--- Content provided by FirstRanker.com ---

weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?

--- Content provided by FirstRanker.com ---

12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.

--- Content provided by FirstRanker.com ---

2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones

--- Content provided by FirstRanker.com ---

2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?

--- Content provided by FirstRanker.com ---

5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?

--- Content provided by FirstRanker.com ---

10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?

--- Content provided by FirstRanker.com ---

15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the

--- Content provided by FirstRanker.com ---

computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.

--- Content provided by FirstRanker.com ---

The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function

--- Content provided by FirstRanker.com ---

Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and

--- Content provided by FirstRanker.com ---

executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:

--- Content provided by FirstRanker.com ---

1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?

--- Content provided by FirstRanker.com ---

4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?

--- Content provided by FirstRanker.com ---

9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE

--- Content provided by FirstRanker.com ---

WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter

--- Content provided by FirstRanker.com ---

(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,

--- Content provided by FirstRanker.com ---

Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores

--- Content provided by FirstRanker.com ---

the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :

--- Content provided by FirstRanker.com ---

1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?

--- Content provided by FirstRanker.com ---

3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-

--- Content provided by FirstRanker.com ---

weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?

--- Content provided by FirstRanker.com ---

12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along

--- Content provided by FirstRanker.com ---

with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches

--- Content provided by FirstRanker.com ---

connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.


FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry

--- Content provided by FirstRanker.com ---

? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

--- Content provided by FirstRanker.com ---

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,

--- Content provided by FirstRanker.com ---

innovation and ethical practices
VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals

--- Content provided by FirstRanker.com ---

To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their

--- Content provided by FirstRanker.com ---

knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products

--- Content provided by FirstRanker.com ---

4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics

--- Content provided by FirstRanker.com ---

To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)

--- Content provided by FirstRanker.com ---

a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics

--- Content provided by FirstRanker.com ---

and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large

--- Content provided by FirstRanker.com ---

h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

--- Content provided by FirstRanker.com ---

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor

--- Content provided by FirstRanker.com ---

? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM

--- Content provided by FirstRanker.com ---

4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA

--- Content provided by FirstRanker.com ---

9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt

--- Content provided by FirstRanker.com ---

? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7

--- Content provided by FirstRanker.com ---

2
Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4

--- Content provided by FirstRanker.com ---

LED dimming using PWM 22
5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28

--- Content provided by FirstRanker.com ---

7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37

--- Content provided by FirstRanker.com ---

10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless

--- Content provided by FirstRanker.com ---

Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:

--- Content provided by FirstRanker.com ---

A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for

--- Content provided by FirstRanker.com ---

servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.

--- Content provided by FirstRanker.com ---

According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:

--- Content provided by FirstRanker.com ---

LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.

--- Content provided by FirstRanker.com ---

2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8

--- Content provided by FirstRanker.com ---

provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit

--- Content provided by FirstRanker.com ---

(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.

--- Content provided by FirstRanker.com ---

11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.

--- Content provided by FirstRanker.com ---

15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:

--- Content provided by FirstRanker.com ---

Pin configuration of LPC 2148.

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply

--- Content provided by FirstRanker.com ---

3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:

--- Content provided by FirstRanker.com ---

LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

--- Content provided by FirstRanker.com ---

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.

--- Content provided by FirstRanker.com ---

LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

--- Content provided by FirstRanker.com ---

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system

--- Content provided by FirstRanker.com ---

to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Recommended values are as shown in table:

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for

--- Content provided by FirstRanker.com ---

voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:

--- Content provided by FirstRanker.com ---

1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as

--- Content provided by FirstRanker.com ---

1. Smart phones
2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC

--- Content provided by FirstRanker.com ---

4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining

--- Content provided by FirstRanker.com ---

9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?

--- Content provided by FirstRanker.com ---

14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from

--- Content provided by FirstRanker.com ---

instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into

--- Content provided by FirstRanker.com ---

Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC

--- Content provided by FirstRanker.com ---

input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.

--- Content provided by FirstRanker.com ---

Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.

--- Content provided by FirstRanker.com ---

5. Used in DSP if input is analog


1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?

--- Content provided by FirstRanker.com ---

3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?

--- Content provided by FirstRanker.com ---

8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.

--- Content provided by FirstRanker.com ---

The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,

--- Content provided by FirstRanker.com ---

Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific

--- Content provided by FirstRanker.com ---

devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.

--- Content provided by FirstRanker.com ---

Circuit diagram:


Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:

--- Content provided by FirstRanker.com ---

Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems

--- Content provided by FirstRanker.com ---

5. Motor control



1. What are the features of LPC2148 DAC?

--- Content provided by FirstRanker.com ---

2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?

--- Content provided by FirstRanker.com ---

7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?

--- Content provided by FirstRanker.com ---

11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?

--- Content provided by FirstRanker.com ---

VIVA-VOCE

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by

--- Content provided by FirstRanker.com ---

dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period

--- Content provided by FirstRanker.com ---

A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The

--- Content provided by FirstRanker.com ---

anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:

--- Content provided by FirstRanker.com ---

Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.


FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry

--- Content provided by FirstRanker.com ---

? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

--- Content provided by FirstRanker.com ---

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,

--- Content provided by FirstRanker.com ---

innovation and ethical practices
VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals

--- Content provided by FirstRanker.com ---

To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their

--- Content provided by FirstRanker.com ---

knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products

--- Content provided by FirstRanker.com ---

4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics

--- Content provided by FirstRanker.com ---

To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)

--- Content provided by FirstRanker.com ---

a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics

--- Content provided by FirstRanker.com ---

and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large

--- Content provided by FirstRanker.com ---

h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

--- Content provided by FirstRanker.com ---

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor

--- Content provided by FirstRanker.com ---

? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM

--- Content provided by FirstRanker.com ---

4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA

--- Content provided by FirstRanker.com ---

9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt

--- Content provided by FirstRanker.com ---

? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7

--- Content provided by FirstRanker.com ---

2
Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4

--- Content provided by FirstRanker.com ---

LED dimming using PWM 22
5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28

--- Content provided by FirstRanker.com ---

7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37

--- Content provided by FirstRanker.com ---

10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless

--- Content provided by FirstRanker.com ---

Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:

--- Content provided by FirstRanker.com ---

A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for

--- Content provided by FirstRanker.com ---

servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.

--- Content provided by FirstRanker.com ---

According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:

--- Content provided by FirstRanker.com ---

LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.

--- Content provided by FirstRanker.com ---

2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8

--- Content provided by FirstRanker.com ---

provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit

--- Content provided by FirstRanker.com ---

(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.

--- Content provided by FirstRanker.com ---

11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.

--- Content provided by FirstRanker.com ---

15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:

--- Content provided by FirstRanker.com ---

Pin configuration of LPC 2148.

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply

--- Content provided by FirstRanker.com ---

3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:

--- Content provided by FirstRanker.com ---

LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

--- Content provided by FirstRanker.com ---

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.

--- Content provided by FirstRanker.com ---

LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

--- Content provided by FirstRanker.com ---

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system

--- Content provided by FirstRanker.com ---

to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Recommended values are as shown in table:

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for

--- Content provided by FirstRanker.com ---

voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:

--- Content provided by FirstRanker.com ---

1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as

--- Content provided by FirstRanker.com ---

1. Smart phones
2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC

--- Content provided by FirstRanker.com ---

4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining

--- Content provided by FirstRanker.com ---

9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?

--- Content provided by FirstRanker.com ---

14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from

--- Content provided by FirstRanker.com ---

instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into

--- Content provided by FirstRanker.com ---

Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC

--- Content provided by FirstRanker.com ---

input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.

--- Content provided by FirstRanker.com ---

Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.

--- Content provided by FirstRanker.com ---

5. Used in DSP if input is analog


1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?

--- Content provided by FirstRanker.com ---

3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?

--- Content provided by FirstRanker.com ---

8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.

--- Content provided by FirstRanker.com ---

The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,

--- Content provided by FirstRanker.com ---

Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific

--- Content provided by FirstRanker.com ---

devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.

--- Content provided by FirstRanker.com ---

Circuit diagram:


Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:

--- Content provided by FirstRanker.com ---

Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems

--- Content provided by FirstRanker.com ---

5. Motor control



1. What are the features of LPC2148 DAC?

--- Content provided by FirstRanker.com ---

2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?

--- Content provided by FirstRanker.com ---

7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?

--- Content provided by FirstRanker.com ---

11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?

--- Content provided by FirstRanker.com ---

VIVA-VOCE

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by

--- Content provided by FirstRanker.com ---

dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period

--- Content provided by FirstRanker.com ---

A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The

--- Content provided by FirstRanker.com ---

anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:

--- Content provided by FirstRanker.com ---

Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?

--- Content provided by FirstRanker.com ---

3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?

--- Content provided by FirstRanker.com ---

8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?

--- Content provided by FirstRanker.com ---

13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.

--- Content provided by FirstRanker.com ---

18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.

--- Content provided by FirstRanker.com ---

2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones

--- Content provided by FirstRanker.com ---

2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?

--- Content provided by FirstRanker.com ---

5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?

--- Content provided by FirstRanker.com ---

10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?

--- Content provided by FirstRanker.com ---

15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the

--- Content provided by FirstRanker.com ---

computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.

--- Content provided by FirstRanker.com ---

The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function

--- Content provided by FirstRanker.com ---

Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and

--- Content provided by FirstRanker.com ---

executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:

--- Content provided by FirstRanker.com ---

1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?

--- Content provided by FirstRanker.com ---

4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?

--- Content provided by FirstRanker.com ---

9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE

--- Content provided by FirstRanker.com ---

WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter

--- Content provided by FirstRanker.com ---

(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,

--- Content provided by FirstRanker.com ---

Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores

--- Content provided by FirstRanker.com ---

the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :

--- Content provided by FirstRanker.com ---

1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?

--- Content provided by FirstRanker.com ---

3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-

--- Content provided by FirstRanker.com ---

weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?

--- Content provided by FirstRanker.com ---

12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along

--- Content provided by FirstRanker.com ---

with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches

--- Content provided by FirstRanker.com ---

connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of

--- Content provided by FirstRanker.com ---

LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?

--- Content provided by FirstRanker.com ---

4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?

--- Content provided by FirstRanker.com ---

9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?

--- Content provided by FirstRanker.com ---

14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?

--- Content provided by FirstRanker.com ---

19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK

--- Content provided by FirstRanker.com ---

AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface

--- Content provided by FirstRanker.com ---

? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system

--- Content provided by FirstRanker.com ---

2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt

--- Content provided by FirstRanker.com ---

7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations

--- Content provided by FirstRanker.com ---

? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES

--- Content provided by FirstRanker.com ---

COURSE OUTCOMES



6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3

--- Content provided by FirstRanker.com ---

Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25

--- Content provided by FirstRanker.com ---

6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47

--- Content provided by FirstRanker.com ---

13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS

--- Content provided by FirstRanker.com ---

14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components

--- Content provided by FirstRanker.com ---

required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad

--- Content provided by FirstRanker.com ---

computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been

--- Content provided by FirstRanker.com ---

produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set

--- Content provided by FirstRanker.com ---

architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:

--- Content provided by FirstRanker.com ---

1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real

--- Content provided by FirstRanker.com ---

Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.

--- Content provided by FirstRanker.com ---

6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with

--- Content provided by FirstRanker.com ---

buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with

--- Content provided by FirstRanker.com ---

an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or

--- Content provided by FirstRanker.com ---

Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:

--- Content provided by FirstRanker.com ---

1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator

--- Content provided by FirstRanker.com ---

6. UART



10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.

--- Content provided by FirstRanker.com ---

Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.

--- Content provided by FirstRanker.com ---

Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?

--- Content provided by FirstRanker.com ---

Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

UART:

--- Content provided by FirstRanker.com ---

LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup

--- Content provided by FirstRanker.com ---

required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers

--- Content provided by FirstRanker.com ---

4. Digital TV
5. Home Gateways


1. What are the basic units of ARM 7?

--- Content provided by FirstRanker.com ---

2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?

--- Content provided by FirstRanker.com ---

7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt

--- Content provided by FirstRanker.com ---

12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete

--- Content provided by FirstRanker.com ---

digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to

--- Content provided by FirstRanker.com ---

scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards

--- Content provided by FirstRanker.com ---

3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?

--- Content provided by FirstRanker.com ---

6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?

--- Content provided by FirstRanker.com ---

11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog

--- Content provided by FirstRanker.com ---

real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection

--- Content provided by FirstRanker.com ---

there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the

--- Content provided by FirstRanker.com ---

master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any

--- Content provided by FirstRanker.com ---

unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI

--- Content provided by FirstRanker.com ---

connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are

--- Content provided by FirstRanker.com ---

written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.
2. Video encoder

--- Content provided by FirstRanker.com ---

3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?

--- Content provided by FirstRanker.com ---

5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?

--- Content provided by FirstRanker.com ---

9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.

--- Content provided by FirstRanker.com ---

14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
LPC2148 supports 2 types of PWM:

--- Content provided by FirstRanker.com ---

1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x

--- Content provided by FirstRanker.com ---

MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and

--- Content provided by FirstRanker.com ---

output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :
1. In Visual signals to covey a message

--- Content provided by FirstRanker.com ---

2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?

--- Content provided by FirstRanker.com ---

6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?

--- Content provided by FirstRanker.com ---

11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?

--- Content provided by FirstRanker.com ---

16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never

--- Content provided by FirstRanker.com ---

resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________

--- Content provided by FirstRanker.com ---

Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and

--- Content provided by FirstRanker.com ---

training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels

--- Content provided by FirstRanker.com ---

? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to

--- Content provided by FirstRanker.com ---

shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry

--- Content provided by FirstRanker.com ---

? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION

--- Content provided by FirstRanker.com ---

VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge

--- Content provided by FirstRanker.com ---

to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions

--- Content provided by FirstRanker.com ---

3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in

--- Content provided by FirstRanker.com ---

the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field

--- Content provided by FirstRanker.com ---

b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems

--- Content provided by FirstRanker.com ---

e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility

--- Content provided by FirstRanker.com ---

i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems

--- Content provided by FirstRanker.com ---

? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:

--- Content provided by FirstRanker.com ---

1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD

--- Content provided by FirstRanker.com ---

6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor

--- Content provided by FirstRanker.com ---

11. Implementing zigbee protocol with ARM



? Write programs in ARM for a specific Application

--- Content provided by FirstRanker.com ---

? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system

--- Content provided by FirstRanker.com ---

COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.

--- Content provided by FirstRanker.com ---

CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16

--- Content provided by FirstRanker.com ---

3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5

--- Content provided by FirstRanker.com ---

Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31

--- Content provided by FirstRanker.com ---

CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43

--- Content provided by FirstRanker.com ---

12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:

--- Content provided by FirstRanker.com ---

To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These

--- Content provided by FirstRanker.com ---

are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power

--- Content provided by FirstRanker.com ---

consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital

--- Content provided by FirstRanker.com ---

televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high

--- Content provided by FirstRanker.com ---

end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.

--- Content provided by FirstRanker.com ---

3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with

--- Content provided by FirstRanker.com ---

conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.

--- Content provided by FirstRanker.com ---

9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.

--- Content provided by FirstRanker.com ---

13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.

--- Content provided by FirstRanker.com ---

16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit

--- Content provided by FirstRanker.com ---

5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted

--- Content provided by FirstRanker.com ---

into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.

--- Content provided by FirstRanker.com ---

Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and

--- Content provided by FirstRanker.com ---

its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:

--- Content provided by FirstRanker.com ---

ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books

--- Content provided by FirstRanker.com ---

3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?

--- Content provided by FirstRanker.com ---

6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?

--- Content provided by FirstRanker.com ---

11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?

--- Content provided by FirstRanker.com ---

16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and

--- Content provided by FirstRanker.com ---

convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is

--- Content provided by FirstRanker.com ---

the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the

--- Content provided by FirstRanker.com ---

A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins

--- Content provided by FirstRanker.com ---

as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.

--- Content provided by FirstRanker.com ---

2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?

--- Content provided by FirstRanker.com ---

5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?

--- Content provided by FirstRanker.com ---

10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or

--- Content provided by FirstRanker.com ---

voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for

--- Content provided by FirstRanker.com ---

industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,

--- Content provided by FirstRanker.com ---

Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and

--- Content provided by FirstRanker.com ---

out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.

--- Content provided by FirstRanker.com ---

2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?

--- Content provided by FirstRanker.com ---

4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?

--- Content provided by FirstRanker.com ---

8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?

--- Content provided by FirstRanker.com ---

13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6

--- Content provided by FirstRanker.com ---

(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED

--- Content provided by FirstRanker.com ---

will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :

--- Content provided by FirstRanker.com ---

1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED

--- Content provided by FirstRanker.com ---

5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?

--- Content provided by FirstRanker.com ---

10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?

--- Content provided by FirstRanker.com ---

15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?

--- Content provided by FirstRanker.com ---

20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt

--- Content provided by FirstRanker.com ---

service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?

--- Content provided by FirstRanker.com ---

6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.

--- Content provided by FirstRanker.com ---

11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.

--- Content provided by FirstRanker.com ---

2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones

--- Content provided by FirstRanker.com ---

2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?

--- Content provided by FirstRanker.com ---

5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?

--- Content provided by FirstRanker.com ---

10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?

--- Content provided by FirstRanker.com ---

15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the

--- Content provided by FirstRanker.com ---

computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.

--- Content provided by FirstRanker.com ---

The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function

--- Content provided by FirstRanker.com ---

Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and

--- Content provided by FirstRanker.com ---

executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:

--- Content provided by FirstRanker.com ---

1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?

--- Content provided by FirstRanker.com ---

4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?

--- Content provided by FirstRanker.com ---

9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE

--- Content provided by FirstRanker.com ---

WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter

--- Content provided by FirstRanker.com ---

(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,

--- Content provided by FirstRanker.com ---

Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores

--- Content provided by FirstRanker.com ---

the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :

--- Content provided by FirstRanker.com ---

1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?

--- Content provided by FirstRanker.com ---

3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-

--- Content provided by FirstRanker.com ---

weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?

--- Content provided by FirstRanker.com ---

12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along

--- Content provided by FirstRanker.com ---

with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches

--- Content provided by FirstRanker.com ---

connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of

--- Content provided by FirstRanker.com ---

LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?

--- Content provided by FirstRanker.com ---

4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?

--- Content provided by FirstRanker.com ---

9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?

--- Content provided by FirstRanker.com ---

14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?

--- Content provided by FirstRanker.com ---

19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK

--- Content provided by FirstRanker.com ---

AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the

--- Content provided by FirstRanker.com ---

date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers

--- Content provided by FirstRanker.com ---

2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?

--- Content provided by FirstRanker.com ---

5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?

--- Content provided by FirstRanker.com ---

10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?

--- Content provided by FirstRanker.com ---

15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not

--- Content provided by FirstRanker.com ---

connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry

--- Content provided by FirstRanker.com ---

? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

--- Content provided by FirstRanker.com ---

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,

--- Content provided by FirstRanker.com ---

innovation and ethical practices
VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals

--- Content provided by FirstRanker.com ---

To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their

--- Content provided by FirstRanker.com ---

knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products

--- Content provided by FirstRanker.com ---

4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics

--- Content provided by FirstRanker.com ---

To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)

--- Content provided by FirstRanker.com ---

a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics

--- Content provided by FirstRanker.com ---

and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large

--- Content provided by FirstRanker.com ---

h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

--- Content provided by FirstRanker.com ---

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor

--- Content provided by FirstRanker.com ---

? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM

--- Content provided by FirstRanker.com ---

4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA

--- Content provided by FirstRanker.com ---

9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt

--- Content provided by FirstRanker.com ---

? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7

--- Content provided by FirstRanker.com ---

2
Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4

--- Content provided by FirstRanker.com ---

LED dimming using PWM 22
5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28

--- Content provided by FirstRanker.com ---

7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37

--- Content provided by FirstRanker.com ---

10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless

--- Content provided by FirstRanker.com ---

Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:

--- Content provided by FirstRanker.com ---

A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for

--- Content provided by FirstRanker.com ---

servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.

--- Content provided by FirstRanker.com ---

According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:

--- Content provided by FirstRanker.com ---

LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.

--- Content provided by FirstRanker.com ---

2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8

--- Content provided by FirstRanker.com ---

provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit

--- Content provided by FirstRanker.com ---

(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.

--- Content provided by FirstRanker.com ---

11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.

--- Content provided by FirstRanker.com ---

15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:

--- Content provided by FirstRanker.com ---

Pin configuration of LPC 2148.

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply

--- Content provided by FirstRanker.com ---

3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:

--- Content provided by FirstRanker.com ---

LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

--- Content provided by FirstRanker.com ---

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.

--- Content provided by FirstRanker.com ---

LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

--- Content provided by FirstRanker.com ---

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system

--- Content provided by FirstRanker.com ---

to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Recommended values are as shown in table:

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for

--- Content provided by FirstRanker.com ---

voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:

--- Content provided by FirstRanker.com ---

1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as

--- Content provided by FirstRanker.com ---

1. Smart phones
2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC

--- Content provided by FirstRanker.com ---

4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining

--- Content provided by FirstRanker.com ---

9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?

--- Content provided by FirstRanker.com ---

14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from

--- Content provided by FirstRanker.com ---

instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into

--- Content provided by FirstRanker.com ---

Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC

--- Content provided by FirstRanker.com ---

input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.

--- Content provided by FirstRanker.com ---

Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.

--- Content provided by FirstRanker.com ---

5. Used in DSP if input is analog


1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?

--- Content provided by FirstRanker.com ---

3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?

--- Content provided by FirstRanker.com ---

8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.

--- Content provided by FirstRanker.com ---

The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,

--- Content provided by FirstRanker.com ---

Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific

--- Content provided by FirstRanker.com ---

devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.

--- Content provided by FirstRanker.com ---

Circuit diagram:


Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:

--- Content provided by FirstRanker.com ---

Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems

--- Content provided by FirstRanker.com ---

5. Motor control



1. What are the features of LPC2148 DAC?

--- Content provided by FirstRanker.com ---

2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?

--- Content provided by FirstRanker.com ---

7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?

--- Content provided by FirstRanker.com ---

11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?

--- Content provided by FirstRanker.com ---

VIVA-VOCE

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by

--- Content provided by FirstRanker.com ---

dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period

--- Content provided by FirstRanker.com ---

A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The

--- Content provided by FirstRanker.com ---

anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:

--- Content provided by FirstRanker.com ---

Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?

--- Content provided by FirstRanker.com ---

3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?

--- Content provided by FirstRanker.com ---

8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?

--- Content provided by FirstRanker.com ---

13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.

--- Content provided by FirstRanker.com ---

18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :

--- Content provided by FirstRanker.com ---

1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?

--- Content provided by FirstRanker.com ---

4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?

--- Content provided by FirstRanker.com ---

9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?

--- Content provided by FirstRanker.com ---

14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the

--- Content provided by FirstRanker.com ---

pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.

--- Content provided by FirstRanker.com ---

So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________

--- Content provided by FirstRanker.com ---

Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and

--- Content provided by FirstRanker.com ---

training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels

--- Content provided by FirstRanker.com ---

? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to

--- Content provided by FirstRanker.com ---

shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry

--- Content provided by FirstRanker.com ---

? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION

--- Content provided by FirstRanker.com ---

VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge

--- Content provided by FirstRanker.com ---

to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions

--- Content provided by FirstRanker.com ---

3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in

--- Content provided by FirstRanker.com ---

the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field

--- Content provided by FirstRanker.com ---

b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems

--- Content provided by FirstRanker.com ---

e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility

--- Content provided by FirstRanker.com ---

i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems

--- Content provided by FirstRanker.com ---

? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:

--- Content provided by FirstRanker.com ---

1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD

--- Content provided by FirstRanker.com ---

6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor

--- Content provided by FirstRanker.com ---

11. Implementing zigbee protocol with ARM



? Write programs in ARM for a specific Application

--- Content provided by FirstRanker.com ---

? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system

--- Content provided by FirstRanker.com ---

COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.

--- Content provided by FirstRanker.com ---

CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16

--- Content provided by FirstRanker.com ---

3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5

--- Content provided by FirstRanker.com ---

Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31

--- Content provided by FirstRanker.com ---

CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43

--- Content provided by FirstRanker.com ---

12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:

--- Content provided by FirstRanker.com ---

To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These

--- Content provided by FirstRanker.com ---

are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power

--- Content provided by FirstRanker.com ---

consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital

--- Content provided by FirstRanker.com ---

televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high

--- Content provided by FirstRanker.com ---

end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.

--- Content provided by FirstRanker.com ---

3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with

--- Content provided by FirstRanker.com ---

conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.

--- Content provided by FirstRanker.com ---

9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.

--- Content provided by FirstRanker.com ---

13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.

--- Content provided by FirstRanker.com ---

16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit

--- Content provided by FirstRanker.com ---

5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted

--- Content provided by FirstRanker.com ---

into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.

--- Content provided by FirstRanker.com ---

Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and

--- Content provided by FirstRanker.com ---

its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:

--- Content provided by FirstRanker.com ---

ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books

--- Content provided by FirstRanker.com ---

3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?

--- Content provided by FirstRanker.com ---

6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?

--- Content provided by FirstRanker.com ---

11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?

--- Content provided by FirstRanker.com ---

16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and

--- Content provided by FirstRanker.com ---

convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is

--- Content provided by FirstRanker.com ---

the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the

--- Content provided by FirstRanker.com ---

A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins

--- Content provided by FirstRanker.com ---

as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.

--- Content provided by FirstRanker.com ---

2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?

--- Content provided by FirstRanker.com ---

5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?

--- Content provided by FirstRanker.com ---

10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or

--- Content provided by FirstRanker.com ---

voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for

--- Content provided by FirstRanker.com ---

industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,

--- Content provided by FirstRanker.com ---

Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and

--- Content provided by FirstRanker.com ---

out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.

--- Content provided by FirstRanker.com ---

2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?

--- Content provided by FirstRanker.com ---

4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?

--- Content provided by FirstRanker.com ---

8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?

--- Content provided by FirstRanker.com ---

13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6

--- Content provided by FirstRanker.com ---

(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED

--- Content provided by FirstRanker.com ---

will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :

--- Content provided by FirstRanker.com ---

1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED

--- Content provided by FirstRanker.com ---

5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?

--- Content provided by FirstRanker.com ---

10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?

--- Content provided by FirstRanker.com ---

15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?

--- Content provided by FirstRanker.com ---

20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt

--- Content provided by FirstRanker.com ---

service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?

--- Content provided by FirstRanker.com ---

6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.

--- Content provided by FirstRanker.com ---

11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection

--- Content provided by FirstRanker.com ---

between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system

--- Content provided by FirstRanker.com ---

2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?

--- Content provided by FirstRanker.com ---

5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?

--- Content provided by FirstRanker.com ---

10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?

--- Content provided by FirstRanker.com ---

19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?



DEPARTMENT OF

--- Content provided by FirstRanker.com ---

ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul

--- Content provided by FirstRanker.com ---

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

--- Content provided by FirstRanker.com ---

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems

--- Content provided by FirstRanker.com ---

? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION
MISSION

--- Content provided by FirstRanker.com ---

MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)

--- Content provided by FirstRanker.com ---

1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence

--- Content provided by FirstRanker.com ---

To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which

--- Content provided by FirstRanker.com ---

enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context

--- Content provided by FirstRanker.com ---

5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability

--- Content provided by FirstRanker.com ---

c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities

--- Content provided by FirstRanker.com ---

g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning

--- Content provided by FirstRanker.com ---

k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

--- Content provided by FirstRanker.com ---

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems

--- Content provided by FirstRanker.com ---

? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC

--- Content provided by FirstRanker.com ---

3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox

--- Content provided by FirstRanker.com ---

8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system

--- Content provided by FirstRanker.com ---

? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1

--- Content provided by FirstRanker.com ---

Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19

--- Content provided by FirstRanker.com ---

4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25
6

--- Content provided by FirstRanker.com ---

Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35

--- Content provided by FirstRanker.com ---

9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13

--- Content provided by FirstRanker.com ---

Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54

--- Content provided by FirstRanker.com ---

15 Relay interface with ARM? 7 57



7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.

--- Content provided by FirstRanker.com ---

Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and

--- Content provided by FirstRanker.com ---

higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used

--- Content provided by FirstRanker.com ---

architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.

--- Content provided by FirstRanker.com ---

LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide

--- Content provided by FirstRanker.com ---

interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.

--- Content provided by FirstRanker.com ---

4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.

--- Content provided by FirstRanker.com ---

7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.

--- Content provided by FirstRanker.com ---

10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz

--- Content provided by FirstRanker.com ---

14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly

--- Content provided by FirstRanker.com ---

2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

--- Content provided by FirstRanker.com ---

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.

--- Content provided by FirstRanker.com ---

Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

--- Content provided by FirstRanker.com ---

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?
Reset Circuit:

--- Content provided by FirstRanker.com ---

Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Recommended values are as shown in table:

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial

--- Content provided by FirstRanker.com ---

communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.

--- Content provided by FirstRanker.com ---

Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

Applications:

--- Content provided by FirstRanker.com ---

ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers
4. Digital TV

--- Content provided by FirstRanker.com ---

5. Home Gateways


1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?

--- Content provided by FirstRanker.com ---

3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?

--- Content provided by FirstRanker.com ---

8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?

--- Content provided by FirstRanker.com ---

13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR

--- Content provided by FirstRanker.com ---

INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the

--- Content provided by FirstRanker.com ---

moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully

--- Content provided by FirstRanker.com ---

accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog

--- Content provided by FirstRanker.com ---

quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes

--- Content provided by FirstRanker.com ---

4. Used in music reproduction technology.
5. Used in DSP if input is analog


1. What are the ADC operating modes in LPC2148?

--- Content provided by FirstRanker.com ---

2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?

--- Content provided by FirstRanker.com ---

7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?

--- Content provided by FirstRanker.com ---

12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip

--- Content provided by FirstRanker.com ---

DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to

--- Content provided by FirstRanker.com ---

implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.

--- Content provided by FirstRanker.com ---

Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave

--- Content provided by FirstRanker.com ---

Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by

--- Content provided by FirstRanker.com ---

using these four lines.
Circuit diagram:


Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.

--- Content provided by FirstRanker.com ---

Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics

--- Content provided by FirstRanker.com ---

4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?

--- Content provided by FirstRanker.com ---

6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?

--- Content provided by FirstRanker.com ---

10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?

--- Content provided by FirstRanker.com ---

15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning

--- Content provided by FirstRanker.com ---

2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.

--- Content provided by FirstRanker.com ---

The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.

--- Content provided by FirstRanker.com ---

Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects

--- Content provided by FirstRanker.com ---

3. In Narrow band sensors



1. What factors determine the LED dimming performance?

--- Content provided by FirstRanker.com ---

2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?

--- Content provided by FirstRanker.com ---

7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?

--- Content provided by FirstRanker.com ---

12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?

--- Content provided by FirstRanker.com ---

17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM

--- Content provided by FirstRanker.com ---

controller
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to

--- Content provided by FirstRanker.com ---

save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time

--- Content provided by FirstRanker.com ---

Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?

--- Content provided by FirstRanker.com ---

3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC

--- Content provided by FirstRanker.com ---

8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?

--- Content provided by FirstRanker.com ---

13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A

--- Content provided by FirstRanker.com ---

4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit Diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key

--- Content provided by FirstRanker.com ---

pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:

--- Content provided by FirstRanker.com ---

Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games

--- Content provided by FirstRanker.com ---

4. Used in portable video games and cell phones



1. What is Matrix keypad?

--- Content provided by FirstRanker.com ---

2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?

--- Content provided by FirstRanker.com ---

7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.

--- Content provided by FirstRanker.com ---

11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?

--- Content provided by FirstRanker.com ---

16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:

--- Content provided by FirstRanker.com ---

To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:
I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication

--- Content provided by FirstRanker.com ---

with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other

--- Content provided by FirstRanker.com ---

electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is

--- Content provided by FirstRanker.com ---

used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface

--- Content provided by FirstRanker.com ---

? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system

--- Content provided by FirstRanker.com ---

2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt

--- Content provided by FirstRanker.com ---

7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations

--- Content provided by FirstRanker.com ---

? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES

--- Content provided by FirstRanker.com ---

COURSE OUTCOMES



6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3

--- Content provided by FirstRanker.com ---

Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25

--- Content provided by FirstRanker.com ---

6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47

--- Content provided by FirstRanker.com ---

13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS

--- Content provided by FirstRanker.com ---

14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components

--- Content provided by FirstRanker.com ---

required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad

--- Content provided by FirstRanker.com ---

computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been

--- Content provided by FirstRanker.com ---

produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set

--- Content provided by FirstRanker.com ---

architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:

--- Content provided by FirstRanker.com ---

1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real

--- Content provided by FirstRanker.com ---

Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.

--- Content provided by FirstRanker.com ---

6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with

--- Content provided by FirstRanker.com ---

buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with

--- Content provided by FirstRanker.com ---

an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or

--- Content provided by FirstRanker.com ---

Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:

--- Content provided by FirstRanker.com ---

1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator

--- Content provided by FirstRanker.com ---

6. UART



10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.

--- Content provided by FirstRanker.com ---

Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.

--- Content provided by FirstRanker.com ---

Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?

--- Content provided by FirstRanker.com ---

Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

UART:

--- Content provided by FirstRanker.com ---

LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup

--- Content provided by FirstRanker.com ---

required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers

--- Content provided by FirstRanker.com ---

4. Digital TV
5. Home Gateways


1. What are the basic units of ARM 7?

--- Content provided by FirstRanker.com ---

2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?

--- Content provided by FirstRanker.com ---

7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt

--- Content provided by FirstRanker.com ---

12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete

--- Content provided by FirstRanker.com ---

digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to

--- Content provided by FirstRanker.com ---

scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards

--- Content provided by FirstRanker.com ---

3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?

--- Content provided by FirstRanker.com ---

6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?

--- Content provided by FirstRanker.com ---

11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog

--- Content provided by FirstRanker.com ---

real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection

--- Content provided by FirstRanker.com ---

there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the

--- Content provided by FirstRanker.com ---

master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any

--- Content provided by FirstRanker.com ---

unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI

--- Content provided by FirstRanker.com ---

connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are

--- Content provided by FirstRanker.com ---

written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.
2. Video encoder

--- Content provided by FirstRanker.com ---

3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?

--- Content provided by FirstRanker.com ---

5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?

--- Content provided by FirstRanker.com ---

9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.

--- Content provided by FirstRanker.com ---

14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
LPC2148 supports 2 types of PWM:

--- Content provided by FirstRanker.com ---

1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x

--- Content provided by FirstRanker.com ---

MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and

--- Content provided by FirstRanker.com ---

output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :
1. In Visual signals to covey a message

--- Content provided by FirstRanker.com ---

2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?

--- Content provided by FirstRanker.com ---

6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?

--- Content provided by FirstRanker.com ---

11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?

--- Content provided by FirstRanker.com ---

16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never

--- Content provided by FirstRanker.com ---

resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?

--- Content provided by FirstRanker.com ---

2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?

--- Content provided by FirstRanker.com ---

7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.

--- Content provided by FirstRanker.com ---

12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and

--- Content provided by FirstRanker.com ---

columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are

--- Content provided by FirstRanker.com ---

connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit Diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system
2. Security system with user changeable

--- Content provided by FirstRanker.com ---

3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.

--- Content provided by FirstRanker.com ---

6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by

--- Content provided by FirstRanker.com ---

CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?

--- Content provided by FirstRanker.com ---

15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between

--- Content provided by FirstRanker.com ---

integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of

--- Content provided by FirstRanker.com ---

higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a

--- Content provided by FirstRanker.com ---

command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________

--- Content provided by FirstRanker.com ---

Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and

--- Content provided by FirstRanker.com ---

training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels

--- Content provided by FirstRanker.com ---

? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to

--- Content provided by FirstRanker.com ---

shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry

--- Content provided by FirstRanker.com ---

? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION

--- Content provided by FirstRanker.com ---

VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge

--- Content provided by FirstRanker.com ---

to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions

--- Content provided by FirstRanker.com ---

3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in

--- Content provided by FirstRanker.com ---

the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field

--- Content provided by FirstRanker.com ---

b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems

--- Content provided by FirstRanker.com ---

e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility

--- Content provided by FirstRanker.com ---

i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems

--- Content provided by FirstRanker.com ---

? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:

--- Content provided by FirstRanker.com ---

1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD

--- Content provided by FirstRanker.com ---

6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor

--- Content provided by FirstRanker.com ---

11. Implementing zigbee protocol with ARM



? Write programs in ARM for a specific Application

--- Content provided by FirstRanker.com ---

? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system

--- Content provided by FirstRanker.com ---

COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.

--- Content provided by FirstRanker.com ---

CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16

--- Content provided by FirstRanker.com ---

3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5

--- Content provided by FirstRanker.com ---

Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31

--- Content provided by FirstRanker.com ---

CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43

--- Content provided by FirstRanker.com ---

12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:

--- Content provided by FirstRanker.com ---

To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These

--- Content provided by FirstRanker.com ---

are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power

--- Content provided by FirstRanker.com ---

consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital

--- Content provided by FirstRanker.com ---

televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high

--- Content provided by FirstRanker.com ---

end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.

--- Content provided by FirstRanker.com ---

3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with

--- Content provided by FirstRanker.com ---

conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.

--- Content provided by FirstRanker.com ---

9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.

--- Content provided by FirstRanker.com ---

13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.

--- Content provided by FirstRanker.com ---

16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit

--- Content provided by FirstRanker.com ---

5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted

--- Content provided by FirstRanker.com ---

into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.

--- Content provided by FirstRanker.com ---

Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and

--- Content provided by FirstRanker.com ---

its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:

--- Content provided by FirstRanker.com ---

ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books

--- Content provided by FirstRanker.com ---

3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?

--- Content provided by FirstRanker.com ---

6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?

--- Content provided by FirstRanker.com ---

11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?

--- Content provided by FirstRanker.com ---

16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and

--- Content provided by FirstRanker.com ---

convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is

--- Content provided by FirstRanker.com ---

the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the

--- Content provided by FirstRanker.com ---

A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins

--- Content provided by FirstRanker.com ---

as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.

--- Content provided by FirstRanker.com ---

2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?

--- Content provided by FirstRanker.com ---

5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?

--- Content provided by FirstRanker.com ---

10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or

--- Content provided by FirstRanker.com ---

voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for

--- Content provided by FirstRanker.com ---

industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,

--- Content provided by FirstRanker.com ---

Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and

--- Content provided by FirstRanker.com ---

out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.

--- Content provided by FirstRanker.com ---

2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?

--- Content provided by FirstRanker.com ---

4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?

--- Content provided by FirstRanker.com ---

8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?

--- Content provided by FirstRanker.com ---

13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6

--- Content provided by FirstRanker.com ---

(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED

--- Content provided by FirstRanker.com ---

will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :

--- Content provided by FirstRanker.com ---

1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED

--- Content provided by FirstRanker.com ---

5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?

--- Content provided by FirstRanker.com ---

10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?

--- Content provided by FirstRanker.com ---

15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?

--- Content provided by FirstRanker.com ---

20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt

--- Content provided by FirstRanker.com ---

service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?

--- Content provided by FirstRanker.com ---

6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.

--- Content provided by FirstRanker.com ---

11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection

--- Content provided by FirstRanker.com ---

between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system

--- Content provided by FirstRanker.com ---

2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?

--- Content provided by FirstRanker.com ---

5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?

--- Content provided by FirstRanker.com ---

10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?

--- Content provided by FirstRanker.com ---

19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):

--- Content provided by FirstRanker.com ---

The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only

--- Content provided by FirstRanker.com ---

memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based

--- Content provided by FirstRanker.com ---

EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &

--- Content provided by FirstRanker.com ---

SCL I2C lines.



32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?

--- Content provided by FirstRanker.com ---

5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?

--- Content provided by FirstRanker.com ---

10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?

--- Content provided by FirstRanker.com ---

15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?

--- Content provided by FirstRanker.com ---

20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________

--- Content provided by FirstRanker.com ---

Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and

--- Content provided by FirstRanker.com ---

training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels

--- Content provided by FirstRanker.com ---

? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to

--- Content provided by FirstRanker.com ---

shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry

--- Content provided by FirstRanker.com ---

? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION

--- Content provided by FirstRanker.com ---

VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge

--- Content provided by FirstRanker.com ---

to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions

--- Content provided by FirstRanker.com ---

3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in

--- Content provided by FirstRanker.com ---

the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field

--- Content provided by FirstRanker.com ---

b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems

--- Content provided by FirstRanker.com ---

e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility

--- Content provided by FirstRanker.com ---

i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems

--- Content provided by FirstRanker.com ---

? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:

--- Content provided by FirstRanker.com ---

1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD

--- Content provided by FirstRanker.com ---

6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor

--- Content provided by FirstRanker.com ---

11. Implementing zigbee protocol with ARM



? Write programs in ARM for a specific Application

--- Content provided by FirstRanker.com ---

? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system

--- Content provided by FirstRanker.com ---

COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.

--- Content provided by FirstRanker.com ---

CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16

--- Content provided by FirstRanker.com ---

3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5

--- Content provided by FirstRanker.com ---

Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31

--- Content provided by FirstRanker.com ---

CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43

--- Content provided by FirstRanker.com ---

12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:

--- Content provided by FirstRanker.com ---

To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These

--- Content provided by FirstRanker.com ---

are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power

--- Content provided by FirstRanker.com ---

consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital

--- Content provided by FirstRanker.com ---

televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high

--- Content provided by FirstRanker.com ---

end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.

--- Content provided by FirstRanker.com ---

3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with

--- Content provided by FirstRanker.com ---

conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.

--- Content provided by FirstRanker.com ---

9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.

--- Content provided by FirstRanker.com ---

13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.

--- Content provided by FirstRanker.com ---

16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit

--- Content provided by FirstRanker.com ---

5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted

--- Content provided by FirstRanker.com ---

into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.

--- Content provided by FirstRanker.com ---

Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and

--- Content provided by FirstRanker.com ---

its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:

--- Content provided by FirstRanker.com ---

ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books

--- Content provided by FirstRanker.com ---

3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?

--- Content provided by FirstRanker.com ---

6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?

--- Content provided by FirstRanker.com ---

11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?

--- Content provided by FirstRanker.com ---

16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and

--- Content provided by FirstRanker.com ---

convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is

--- Content provided by FirstRanker.com ---

the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the

--- Content provided by FirstRanker.com ---

A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins

--- Content provided by FirstRanker.com ---

as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.

--- Content provided by FirstRanker.com ---

2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?

--- Content provided by FirstRanker.com ---

5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?

--- Content provided by FirstRanker.com ---

10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or

--- Content provided by FirstRanker.com ---

voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for

--- Content provided by FirstRanker.com ---

industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,

--- Content provided by FirstRanker.com ---

Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and

--- Content provided by FirstRanker.com ---

out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.

--- Content provided by FirstRanker.com ---

2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?

--- Content provided by FirstRanker.com ---

4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?

--- Content provided by FirstRanker.com ---

8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?

--- Content provided by FirstRanker.com ---

13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6

--- Content provided by FirstRanker.com ---

(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED

--- Content provided by FirstRanker.com ---

will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :

--- Content provided by FirstRanker.com ---

1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED

--- Content provided by FirstRanker.com ---

5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?

--- Content provided by FirstRanker.com ---

10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?

--- Content provided by FirstRanker.com ---

15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?

--- Content provided by FirstRanker.com ---

20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt

--- Content provided by FirstRanker.com ---

service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?

--- Content provided by FirstRanker.com ---

6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.

--- Content provided by FirstRanker.com ---

11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection

--- Content provided by FirstRanker.com ---

between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system

--- Content provided by FirstRanker.com ---

2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?

--- Content provided by FirstRanker.com ---

5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?

--- Content provided by FirstRanker.com ---

10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?

--- Content provided by FirstRanker.com ---

19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):

--- Content provided by FirstRanker.com ---

The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only

--- Content provided by FirstRanker.com ---

memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based

--- Content provided by FirstRanker.com ---

EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &

--- Content provided by FirstRanker.com ---

SCL I2C lines.



32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?

--- Content provided by FirstRanker.com ---

5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?

--- Content provided by FirstRanker.com ---

10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?

--- Content provided by FirstRanker.com ---

15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?

--- Content provided by FirstRanker.com ---

20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface

--- Content provided by FirstRanker.com ---

? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system

--- Content provided by FirstRanker.com ---

2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt

--- Content provided by FirstRanker.com ---

7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations

--- Content provided by FirstRanker.com ---

? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES

--- Content provided by FirstRanker.com ---

COURSE OUTCOMES



6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3

--- Content provided by FirstRanker.com ---

Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25

--- Content provided by FirstRanker.com ---

6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47

--- Content provided by FirstRanker.com ---

13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS

--- Content provided by FirstRanker.com ---

14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components

--- Content provided by FirstRanker.com ---

required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad

--- Content provided by FirstRanker.com ---

computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been

--- Content provided by FirstRanker.com ---

produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set

--- Content provided by FirstRanker.com ---

architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:

--- Content provided by FirstRanker.com ---

1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real

--- Content provided by FirstRanker.com ---

Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.

--- Content provided by FirstRanker.com ---

6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with

--- Content provided by FirstRanker.com ---

buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with

--- Content provided by FirstRanker.com ---

an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or

--- Content provided by FirstRanker.com ---

Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:

--- Content provided by FirstRanker.com ---

1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator

--- Content provided by FirstRanker.com ---

6. UART



10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.

--- Content provided by FirstRanker.com ---

Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.

--- Content provided by FirstRanker.com ---

Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?

--- Content provided by FirstRanker.com ---

Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

UART:

--- Content provided by FirstRanker.com ---

LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup

--- Content provided by FirstRanker.com ---

required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers

--- Content provided by FirstRanker.com ---

4. Digital TV
5. Home Gateways


1. What are the basic units of ARM 7?

--- Content provided by FirstRanker.com ---

2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?

--- Content provided by FirstRanker.com ---

7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt

--- Content provided by FirstRanker.com ---

12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete

--- Content provided by FirstRanker.com ---

digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to

--- Content provided by FirstRanker.com ---

scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards

--- Content provided by FirstRanker.com ---

3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?

--- Content provided by FirstRanker.com ---

6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?

--- Content provided by FirstRanker.com ---

11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog

--- Content provided by FirstRanker.com ---

real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection

--- Content provided by FirstRanker.com ---

there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the

--- Content provided by FirstRanker.com ---

master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any

--- Content provided by FirstRanker.com ---

unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI

--- Content provided by FirstRanker.com ---

connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are

--- Content provided by FirstRanker.com ---

written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.
2. Video encoder

--- Content provided by FirstRanker.com ---

3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?

--- Content provided by FirstRanker.com ---

5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?

--- Content provided by FirstRanker.com ---

9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.

--- Content provided by FirstRanker.com ---

14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
LPC2148 supports 2 types of PWM:

--- Content provided by FirstRanker.com ---

1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x

--- Content provided by FirstRanker.com ---

MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and

--- Content provided by FirstRanker.com ---

output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :
1. In Visual signals to covey a message

--- Content provided by FirstRanker.com ---

2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?

--- Content provided by FirstRanker.com ---

6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?

--- Content provided by FirstRanker.com ---

11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?

--- Content provided by FirstRanker.com ---

16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never

--- Content provided by FirstRanker.com ---

resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?

--- Content provided by FirstRanker.com ---

2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?

--- Content provided by FirstRanker.com ---

7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.

--- Content provided by FirstRanker.com ---

12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and

--- Content provided by FirstRanker.com ---

columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are

--- Content provided by FirstRanker.com ---

connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit Diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system
2. Security system with user changeable

--- Content provided by FirstRanker.com ---

3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.

--- Content provided by FirstRanker.com ---

6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by

--- Content provided by FirstRanker.com ---

CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?

--- Content provided by FirstRanker.com ---

15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between

--- Content provided by FirstRanker.com ---

integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of

--- Content provided by FirstRanker.com ---

higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a

--- Content provided by FirstRanker.com ---

command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. ROM used in toys,automobiles to store data when power is off

--- Content provided by FirstRanker.com ---

2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?
5. What is an interrupt?

--- Content provided by FirstRanker.com ---

6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?
10. What is EPROM?

--- Content provided by FirstRanker.com ---

11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?
15. What is non maskable interrupt?

--- Content provided by FirstRanker.com ---

16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.

--- Content provided by FirstRanker.com ---

The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.
Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:

--- Content provided by FirstRanker.com ---

Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface

--- Content provided by FirstRanker.com ---

? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system

--- Content provided by FirstRanker.com ---

2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt

--- Content provided by FirstRanker.com ---

7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations

--- Content provided by FirstRanker.com ---

? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES

--- Content provided by FirstRanker.com ---

COURSE OUTCOMES



6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3

--- Content provided by FirstRanker.com ---

Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25

--- Content provided by FirstRanker.com ---

6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47

--- Content provided by FirstRanker.com ---

13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS

--- Content provided by FirstRanker.com ---

14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components

--- Content provided by FirstRanker.com ---

required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad

--- Content provided by FirstRanker.com ---

computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been

--- Content provided by FirstRanker.com ---

produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set

--- Content provided by FirstRanker.com ---

architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:

--- Content provided by FirstRanker.com ---

1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real

--- Content provided by FirstRanker.com ---

Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.

--- Content provided by FirstRanker.com ---

6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with

--- Content provided by FirstRanker.com ---

buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with

--- Content provided by FirstRanker.com ---

an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or

--- Content provided by FirstRanker.com ---

Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:

--- Content provided by FirstRanker.com ---

1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator

--- Content provided by FirstRanker.com ---

6. UART



10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.

--- Content provided by FirstRanker.com ---

Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.

--- Content provided by FirstRanker.com ---

Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?

--- Content provided by FirstRanker.com ---

Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

UART:

--- Content provided by FirstRanker.com ---

LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup

--- Content provided by FirstRanker.com ---

required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers

--- Content provided by FirstRanker.com ---

4. Digital TV
5. Home Gateways


1. What are the basic units of ARM 7?

--- Content provided by FirstRanker.com ---

2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?

--- Content provided by FirstRanker.com ---

7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt

--- Content provided by FirstRanker.com ---

12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete

--- Content provided by FirstRanker.com ---

digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to

--- Content provided by FirstRanker.com ---

scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards

--- Content provided by FirstRanker.com ---

3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?

--- Content provided by FirstRanker.com ---

6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?

--- Content provided by FirstRanker.com ---

11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog

--- Content provided by FirstRanker.com ---

real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection

--- Content provided by FirstRanker.com ---

there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the

--- Content provided by FirstRanker.com ---

master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any

--- Content provided by FirstRanker.com ---

unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI

--- Content provided by FirstRanker.com ---

connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are

--- Content provided by FirstRanker.com ---

written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.
2. Video encoder

--- Content provided by FirstRanker.com ---

3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?

--- Content provided by FirstRanker.com ---

5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?

--- Content provided by FirstRanker.com ---

9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.

--- Content provided by FirstRanker.com ---

14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
LPC2148 supports 2 types of PWM:

--- Content provided by FirstRanker.com ---

1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x

--- Content provided by FirstRanker.com ---

MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and

--- Content provided by FirstRanker.com ---

output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :
1. In Visual signals to covey a message

--- Content provided by FirstRanker.com ---

2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?

--- Content provided by FirstRanker.com ---

6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?

--- Content provided by FirstRanker.com ---

11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?

--- Content provided by FirstRanker.com ---

16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never

--- Content provided by FirstRanker.com ---

resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?

--- Content provided by FirstRanker.com ---

2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?

--- Content provided by FirstRanker.com ---

7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.

--- Content provided by FirstRanker.com ---

12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and

--- Content provided by FirstRanker.com ---

columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are

--- Content provided by FirstRanker.com ---

connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit Diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system
2. Security system with user changeable

--- Content provided by FirstRanker.com ---

3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.

--- Content provided by FirstRanker.com ---

6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by

--- Content provided by FirstRanker.com ---

CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?

--- Content provided by FirstRanker.com ---

15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between

--- Content provided by FirstRanker.com ---

integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of

--- Content provided by FirstRanker.com ---

higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a

--- Content provided by FirstRanker.com ---

command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. ROM used in toys,automobiles to store data when power is off

--- Content provided by FirstRanker.com ---

2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?
5. What is an interrupt?

--- Content provided by FirstRanker.com ---

6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?
10. What is EPROM?

--- Content provided by FirstRanker.com ---

11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?
15. What is non maskable interrupt?

--- Content provided by FirstRanker.com ---

16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.

--- Content provided by FirstRanker.com ---

The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.
Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:

--- Content provided by FirstRanker.com ---

Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger

--- Content provided by FirstRanker.com ---

3. Used in Meizu M6 MINI player


1. What is IPC?
2. Define Queue.

--- Content provided by FirstRanker.com ---

3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt
7. What is branch prediction?

--- Content provided by FirstRanker.com ---

8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________

--- Content provided by FirstRanker.com ---

Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and

--- Content provided by FirstRanker.com ---

training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels

--- Content provided by FirstRanker.com ---

? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to

--- Content provided by FirstRanker.com ---

shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry

--- Content provided by FirstRanker.com ---

? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION

--- Content provided by FirstRanker.com ---

VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge

--- Content provided by FirstRanker.com ---

to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions

--- Content provided by FirstRanker.com ---

3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in

--- Content provided by FirstRanker.com ---

the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field

--- Content provided by FirstRanker.com ---

b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems

--- Content provided by FirstRanker.com ---

e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility

--- Content provided by FirstRanker.com ---

i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems

--- Content provided by FirstRanker.com ---

? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:

--- Content provided by FirstRanker.com ---

1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD

--- Content provided by FirstRanker.com ---

6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor

--- Content provided by FirstRanker.com ---

11. Implementing zigbee protocol with ARM



? Write programs in ARM for a specific Application

--- Content provided by FirstRanker.com ---

? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system

--- Content provided by FirstRanker.com ---

COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.

--- Content provided by FirstRanker.com ---

CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16

--- Content provided by FirstRanker.com ---

3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5

--- Content provided by FirstRanker.com ---

Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31

--- Content provided by FirstRanker.com ---

CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43

--- Content provided by FirstRanker.com ---

12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:

--- Content provided by FirstRanker.com ---

To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These

--- Content provided by FirstRanker.com ---

are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power

--- Content provided by FirstRanker.com ---

consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital

--- Content provided by FirstRanker.com ---

televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high

--- Content provided by FirstRanker.com ---

end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.

--- Content provided by FirstRanker.com ---

3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with

--- Content provided by FirstRanker.com ---

conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.

--- Content provided by FirstRanker.com ---

9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.

--- Content provided by FirstRanker.com ---

13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.

--- Content provided by FirstRanker.com ---

16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit

--- Content provided by FirstRanker.com ---

5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted

--- Content provided by FirstRanker.com ---

into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.

--- Content provided by FirstRanker.com ---

Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and

--- Content provided by FirstRanker.com ---

its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:

--- Content provided by FirstRanker.com ---

ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books

--- Content provided by FirstRanker.com ---

3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?

--- Content provided by FirstRanker.com ---

6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?

--- Content provided by FirstRanker.com ---

11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?

--- Content provided by FirstRanker.com ---

16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and

--- Content provided by FirstRanker.com ---

convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is

--- Content provided by FirstRanker.com ---

the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the

--- Content provided by FirstRanker.com ---

A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins

--- Content provided by FirstRanker.com ---

as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.

--- Content provided by FirstRanker.com ---

2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?

--- Content provided by FirstRanker.com ---

5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?

--- Content provided by FirstRanker.com ---

10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or

--- Content provided by FirstRanker.com ---

voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for

--- Content provided by FirstRanker.com ---

industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,

--- Content provided by FirstRanker.com ---

Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and

--- Content provided by FirstRanker.com ---

out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.

--- Content provided by FirstRanker.com ---

2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?

--- Content provided by FirstRanker.com ---

4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?

--- Content provided by FirstRanker.com ---

8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?

--- Content provided by FirstRanker.com ---

13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6

--- Content provided by FirstRanker.com ---

(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED

--- Content provided by FirstRanker.com ---

will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :

--- Content provided by FirstRanker.com ---

1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED

--- Content provided by FirstRanker.com ---

5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?

--- Content provided by FirstRanker.com ---

10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?

--- Content provided by FirstRanker.com ---

15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?

--- Content provided by FirstRanker.com ---

20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt

--- Content provided by FirstRanker.com ---

service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?

--- Content provided by FirstRanker.com ---

6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.

--- Content provided by FirstRanker.com ---

11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection

--- Content provided by FirstRanker.com ---

between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system

--- Content provided by FirstRanker.com ---

2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?

--- Content provided by FirstRanker.com ---

5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?

--- Content provided by FirstRanker.com ---

10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?

--- Content provided by FirstRanker.com ---

19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):

--- Content provided by FirstRanker.com ---

The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only

--- Content provided by FirstRanker.com ---

memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based

--- Content provided by FirstRanker.com ---

EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &

--- Content provided by FirstRanker.com ---

SCL I2C lines.



32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?

--- Content provided by FirstRanker.com ---

5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?

--- Content provided by FirstRanker.com ---

10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?

--- Content provided by FirstRanker.com ---

15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?

--- Content provided by FirstRanker.com ---

20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that

--- Content provided by FirstRanker.com ---

the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.

--- Content provided by FirstRanker.com ---

Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in Acorn RISC PC700

--- Content provided by FirstRanker.com ---

2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player


1. What is IPC?

--- Content provided by FirstRanker.com ---

2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt

--- Content provided by FirstRanker.com ---

7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and

--- Content provided by FirstRanker.com ---

FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.

--- Content provided by FirstRanker.com ---

Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7

--- Content provided by FirstRanker.com ---

LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.

--- Content provided by FirstRanker.com ---

2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones

--- Content provided by FirstRanker.com ---

2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?

--- Content provided by FirstRanker.com ---

5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?

--- Content provided by FirstRanker.com ---

10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?

--- Content provided by FirstRanker.com ---

15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the

--- Content provided by FirstRanker.com ---

computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.

--- Content provided by FirstRanker.com ---

The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function

--- Content provided by FirstRanker.com ---

Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and

--- Content provided by FirstRanker.com ---

executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:

--- Content provided by FirstRanker.com ---

1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?

--- Content provided by FirstRanker.com ---

4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?

--- Content provided by FirstRanker.com ---

9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE

--- Content provided by FirstRanker.com ---

WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter

--- Content provided by FirstRanker.com ---

(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,

--- Content provided by FirstRanker.com ---

Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores

--- Content provided by FirstRanker.com ---

the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :

--- Content provided by FirstRanker.com ---

1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?

--- Content provided by FirstRanker.com ---

3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-

--- Content provided by FirstRanker.com ---

weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?

--- Content provided by FirstRanker.com ---

12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along

--- Content provided by FirstRanker.com ---

with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches

--- Content provided by FirstRanker.com ---

connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of

--- Content provided by FirstRanker.com ---

LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?

--- Content provided by FirstRanker.com ---

4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?

--- Content provided by FirstRanker.com ---

9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?

--- Content provided by FirstRanker.com ---

14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?

--- Content provided by FirstRanker.com ---

19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK

--- Content provided by FirstRanker.com ---

AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the

--- Content provided by FirstRanker.com ---

date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers

--- Content provided by FirstRanker.com ---

2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?

--- Content provided by FirstRanker.com ---

5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?

--- Content provided by FirstRanker.com ---

10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?

--- Content provided by FirstRanker.com ---

15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not

--- Content provided by FirstRanker.com ---

connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :

--- Content provided by FirstRanker.com ---

1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?

--- Content provided by FirstRanker.com ---

4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?

--- Content provided by FirstRanker.com ---

9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?

--- Content provided by FirstRanker.com ---

18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:

--- Content provided by FirstRanker.com ---

EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration

--- Content provided by FirstRanker.com ---

Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial

--- Content provided by FirstRanker.com ---

EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?

--- Content provided by FirstRanker.com ---

4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?

--- Content provided by FirstRanker.com ---

9. What is PROM?
10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?

--- Content provided by FirstRanker.com ---

14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?

--- Content provided by FirstRanker.com ---

19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this

--- Content provided by FirstRanker.com ---

message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.

--- Content provided by FirstRanker.com ---

The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?

--- Content provided by FirstRanker.com ---

6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.

--- Content provided by FirstRanker.com ---

11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:

--- Content provided by FirstRanker.com ---

To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or

--- Content provided by FirstRanker.com ---

monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and

--- Content provided by FirstRanker.com ---

programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface

--- Content provided by FirstRanker.com ---

? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system

--- Content provided by FirstRanker.com ---

2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt

--- Content provided by FirstRanker.com ---

7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations

--- Content provided by FirstRanker.com ---

? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES

--- Content provided by FirstRanker.com ---

COURSE OUTCOMES



6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3

--- Content provided by FirstRanker.com ---

Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25

--- Content provided by FirstRanker.com ---

6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47

--- Content provided by FirstRanker.com ---

13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS

--- Content provided by FirstRanker.com ---

14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components

--- Content provided by FirstRanker.com ---

required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad

--- Content provided by FirstRanker.com ---

computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been

--- Content provided by FirstRanker.com ---

produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set

--- Content provided by FirstRanker.com ---

architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:

--- Content provided by FirstRanker.com ---

1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real

--- Content provided by FirstRanker.com ---

Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.

--- Content provided by FirstRanker.com ---

6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with

--- Content provided by FirstRanker.com ---

buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with

--- Content provided by FirstRanker.com ---

an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or

--- Content provided by FirstRanker.com ---

Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:

--- Content provided by FirstRanker.com ---

1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator

--- Content provided by FirstRanker.com ---

6. UART



10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.

--- Content provided by FirstRanker.com ---

Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.

--- Content provided by FirstRanker.com ---

Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?

--- Content provided by FirstRanker.com ---

Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

UART:

--- Content provided by FirstRanker.com ---

LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup

--- Content provided by FirstRanker.com ---

required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers

--- Content provided by FirstRanker.com ---

4. Digital TV
5. Home Gateways


1. What are the basic units of ARM 7?

--- Content provided by FirstRanker.com ---

2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?

--- Content provided by FirstRanker.com ---

7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt

--- Content provided by FirstRanker.com ---

12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete

--- Content provided by FirstRanker.com ---

digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to

--- Content provided by FirstRanker.com ---

scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards

--- Content provided by FirstRanker.com ---

3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?

--- Content provided by FirstRanker.com ---

6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?

--- Content provided by FirstRanker.com ---

11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog

--- Content provided by FirstRanker.com ---

real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection

--- Content provided by FirstRanker.com ---

there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the

--- Content provided by FirstRanker.com ---

master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any

--- Content provided by FirstRanker.com ---

unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI

--- Content provided by FirstRanker.com ---

connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are

--- Content provided by FirstRanker.com ---

written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.
2. Video encoder

--- Content provided by FirstRanker.com ---

3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?

--- Content provided by FirstRanker.com ---

5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?

--- Content provided by FirstRanker.com ---

9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.

--- Content provided by FirstRanker.com ---

14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
LPC2148 supports 2 types of PWM:

--- Content provided by FirstRanker.com ---

1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x

--- Content provided by FirstRanker.com ---

MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and

--- Content provided by FirstRanker.com ---

output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :
1. In Visual signals to covey a message

--- Content provided by FirstRanker.com ---

2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?

--- Content provided by FirstRanker.com ---

6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?

--- Content provided by FirstRanker.com ---

11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?

--- Content provided by FirstRanker.com ---

16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never

--- Content provided by FirstRanker.com ---

resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?

--- Content provided by FirstRanker.com ---

2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?

--- Content provided by FirstRanker.com ---

7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.

--- Content provided by FirstRanker.com ---

12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and

--- Content provided by FirstRanker.com ---

columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are

--- Content provided by FirstRanker.com ---

connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit Diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system
2. Security system with user changeable

--- Content provided by FirstRanker.com ---

3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.

--- Content provided by FirstRanker.com ---

6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by

--- Content provided by FirstRanker.com ---

CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?

--- Content provided by FirstRanker.com ---

15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between

--- Content provided by FirstRanker.com ---

integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of

--- Content provided by FirstRanker.com ---

higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a

--- Content provided by FirstRanker.com ---

command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. ROM used in toys,automobiles to store data when power is off

--- Content provided by FirstRanker.com ---

2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?
5. What is an interrupt?

--- Content provided by FirstRanker.com ---

6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?
10. What is EPROM?

--- Content provided by FirstRanker.com ---

11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?
15. What is non maskable interrupt?

--- Content provided by FirstRanker.com ---

16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.

--- Content provided by FirstRanker.com ---

The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.
Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:

--- Content provided by FirstRanker.com ---

Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger

--- Content provided by FirstRanker.com ---

3. Used in Meizu M6 MINI player


1. What is IPC?
2. Define Queue.

--- Content provided by FirstRanker.com ---

3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt
7. What is branch prediction?

--- Content provided by FirstRanker.com ---

8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 9 INTERRUPT PERFORMANCE

--- Content provided by FirstRanker.com ---

CHARACTERISTICSOF ARM AND FPGA

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:

--- Content provided by FirstRanker.com ---

When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &

--- Content provided by FirstRanker.com ---

P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing

--- Content provided by FirstRanker.com ---

and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts
Applications:

--- Content provided by FirstRanker.com ---

1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?
3. How do you initialize interrupt?

--- Content provided by FirstRanker.com ---

4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?
7. What is pipeline shutdown?
8. What is branch prediction?

--- Content provided by FirstRanker.com ---

9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?
12. What is ITM?
13. What is ETM?

--- Content provided by FirstRanker.com ---

14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

Viva-voce

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________

--- Content provided by FirstRanker.com ---

Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and

--- Content provided by FirstRanker.com ---

training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels

--- Content provided by FirstRanker.com ---

? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to

--- Content provided by FirstRanker.com ---

shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry

--- Content provided by FirstRanker.com ---

? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION

--- Content provided by FirstRanker.com ---

VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge

--- Content provided by FirstRanker.com ---

to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions

--- Content provided by FirstRanker.com ---

3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in

--- Content provided by FirstRanker.com ---

the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field

--- Content provided by FirstRanker.com ---

b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems

--- Content provided by FirstRanker.com ---

e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility

--- Content provided by FirstRanker.com ---

i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems

--- Content provided by FirstRanker.com ---

? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:

--- Content provided by FirstRanker.com ---

1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD

--- Content provided by FirstRanker.com ---

6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor

--- Content provided by FirstRanker.com ---

11. Implementing zigbee protocol with ARM



? Write programs in ARM for a specific Application

--- Content provided by FirstRanker.com ---

? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system

--- Content provided by FirstRanker.com ---

COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.

--- Content provided by FirstRanker.com ---

CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16

--- Content provided by FirstRanker.com ---

3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5

--- Content provided by FirstRanker.com ---

Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31

--- Content provided by FirstRanker.com ---

CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43

--- Content provided by FirstRanker.com ---

12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:

--- Content provided by FirstRanker.com ---

To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These

--- Content provided by FirstRanker.com ---

are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power

--- Content provided by FirstRanker.com ---

consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital

--- Content provided by FirstRanker.com ---

televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high

--- Content provided by FirstRanker.com ---

end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.

--- Content provided by FirstRanker.com ---

3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with

--- Content provided by FirstRanker.com ---

conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.

--- Content provided by FirstRanker.com ---

9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.

--- Content provided by FirstRanker.com ---

13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.

--- Content provided by FirstRanker.com ---

16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit

--- Content provided by FirstRanker.com ---

5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted

--- Content provided by FirstRanker.com ---

into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.

--- Content provided by FirstRanker.com ---

Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and

--- Content provided by FirstRanker.com ---

its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:

--- Content provided by FirstRanker.com ---

ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books

--- Content provided by FirstRanker.com ---

3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?

--- Content provided by FirstRanker.com ---

6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?

--- Content provided by FirstRanker.com ---

11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?

--- Content provided by FirstRanker.com ---

16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and

--- Content provided by FirstRanker.com ---

convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is

--- Content provided by FirstRanker.com ---

the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the

--- Content provided by FirstRanker.com ---

A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins

--- Content provided by FirstRanker.com ---

as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.

--- Content provided by FirstRanker.com ---

2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?

--- Content provided by FirstRanker.com ---

5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?

--- Content provided by FirstRanker.com ---

10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or

--- Content provided by FirstRanker.com ---

voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for

--- Content provided by FirstRanker.com ---

industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,

--- Content provided by FirstRanker.com ---

Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and

--- Content provided by FirstRanker.com ---

out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.

--- Content provided by FirstRanker.com ---

2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?

--- Content provided by FirstRanker.com ---

4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?

--- Content provided by FirstRanker.com ---

8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?

--- Content provided by FirstRanker.com ---

13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6

--- Content provided by FirstRanker.com ---

(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED

--- Content provided by FirstRanker.com ---

will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :

--- Content provided by FirstRanker.com ---

1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED

--- Content provided by FirstRanker.com ---

5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?

--- Content provided by FirstRanker.com ---

10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?

--- Content provided by FirstRanker.com ---

15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?

--- Content provided by FirstRanker.com ---

20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt

--- Content provided by FirstRanker.com ---

service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?

--- Content provided by FirstRanker.com ---

6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.

--- Content provided by FirstRanker.com ---

11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection

--- Content provided by FirstRanker.com ---

between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system

--- Content provided by FirstRanker.com ---

2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?

--- Content provided by FirstRanker.com ---

5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?

--- Content provided by FirstRanker.com ---

10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?

--- Content provided by FirstRanker.com ---

19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):

--- Content provided by FirstRanker.com ---

The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only

--- Content provided by FirstRanker.com ---

memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based

--- Content provided by FirstRanker.com ---

EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &

--- Content provided by FirstRanker.com ---

SCL I2C lines.



32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?

--- Content provided by FirstRanker.com ---

5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?

--- Content provided by FirstRanker.com ---

10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?

--- Content provided by FirstRanker.com ---

15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?

--- Content provided by FirstRanker.com ---

20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that

--- Content provided by FirstRanker.com ---

the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.

--- Content provided by FirstRanker.com ---

Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in Acorn RISC PC700

--- Content provided by FirstRanker.com ---

2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player


1. What is IPC?

--- Content provided by FirstRanker.com ---

2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt

--- Content provided by FirstRanker.com ---

7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and

--- Content provided by FirstRanker.com ---

FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.

--- Content provided by FirstRanker.com ---

Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7

--- Content provided by FirstRanker.com ---

LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM

--- Content provided by FirstRanker.com ---

counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts

--- Content provided by FirstRanker.com ---

Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?

--- Content provided by FirstRanker.com ---

3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?
7. What is pipeline shutdown?

--- Content provided by FirstRanker.com ---

8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?
12. What is ITM?

--- Content provided by FirstRanker.com ---

13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse

--- Content provided by FirstRanker.com ---

click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry

--- Content provided by FirstRanker.com ---

? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

--- Content provided by FirstRanker.com ---

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,

--- Content provided by FirstRanker.com ---

innovation and ethical practices
VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals

--- Content provided by FirstRanker.com ---

To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their

--- Content provided by FirstRanker.com ---

knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products

--- Content provided by FirstRanker.com ---

4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics

--- Content provided by FirstRanker.com ---

To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)

--- Content provided by FirstRanker.com ---

a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics

--- Content provided by FirstRanker.com ---

and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large

--- Content provided by FirstRanker.com ---

h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

--- Content provided by FirstRanker.com ---

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor

--- Content provided by FirstRanker.com ---

? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM

--- Content provided by FirstRanker.com ---

4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA

--- Content provided by FirstRanker.com ---

9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt

--- Content provided by FirstRanker.com ---

? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7

--- Content provided by FirstRanker.com ---

2
Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4

--- Content provided by FirstRanker.com ---

LED dimming using PWM 22
5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28

--- Content provided by FirstRanker.com ---

7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37

--- Content provided by FirstRanker.com ---

10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless

--- Content provided by FirstRanker.com ---

Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:

--- Content provided by FirstRanker.com ---

A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for

--- Content provided by FirstRanker.com ---

servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.

--- Content provided by FirstRanker.com ---

According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:

--- Content provided by FirstRanker.com ---

LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.

--- Content provided by FirstRanker.com ---

2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8

--- Content provided by FirstRanker.com ---

provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit

--- Content provided by FirstRanker.com ---

(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.

--- Content provided by FirstRanker.com ---

11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.

--- Content provided by FirstRanker.com ---

15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:

--- Content provided by FirstRanker.com ---

Pin configuration of LPC 2148.

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply

--- Content provided by FirstRanker.com ---

3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:

--- Content provided by FirstRanker.com ---

LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

--- Content provided by FirstRanker.com ---

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.

--- Content provided by FirstRanker.com ---

LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

--- Content provided by FirstRanker.com ---

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system

--- Content provided by FirstRanker.com ---

to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Recommended values are as shown in table:

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for

--- Content provided by FirstRanker.com ---

voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:

--- Content provided by FirstRanker.com ---

1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as

--- Content provided by FirstRanker.com ---

1. Smart phones
2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC

--- Content provided by FirstRanker.com ---

4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining

--- Content provided by FirstRanker.com ---

9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?

--- Content provided by FirstRanker.com ---

14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from

--- Content provided by FirstRanker.com ---

instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into

--- Content provided by FirstRanker.com ---

Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC

--- Content provided by FirstRanker.com ---

input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.

--- Content provided by FirstRanker.com ---

Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.

--- Content provided by FirstRanker.com ---

5. Used in DSP if input is analog


1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?

--- Content provided by FirstRanker.com ---

3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?

--- Content provided by FirstRanker.com ---

8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.

--- Content provided by FirstRanker.com ---

The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,

--- Content provided by FirstRanker.com ---

Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific

--- Content provided by FirstRanker.com ---

devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.

--- Content provided by FirstRanker.com ---

Circuit diagram:


Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:

--- Content provided by FirstRanker.com ---

Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems

--- Content provided by FirstRanker.com ---

5. Motor control



1. What are the features of LPC2148 DAC?

--- Content provided by FirstRanker.com ---

2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?

--- Content provided by FirstRanker.com ---

7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?

--- Content provided by FirstRanker.com ---

11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?

--- Content provided by FirstRanker.com ---

VIVA-VOCE

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by

--- Content provided by FirstRanker.com ---

dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period

--- Content provided by FirstRanker.com ---

A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The

--- Content provided by FirstRanker.com ---

anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:

--- Content provided by FirstRanker.com ---

Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?

--- Content provided by FirstRanker.com ---

3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?

--- Content provided by FirstRanker.com ---

8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?

--- Content provided by FirstRanker.com ---

13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.

--- Content provided by FirstRanker.com ---

18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :

--- Content provided by FirstRanker.com ---

1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?

--- Content provided by FirstRanker.com ---

4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?

--- Content provided by FirstRanker.com ---

9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?

--- Content provided by FirstRanker.com ---

14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the

--- Content provided by FirstRanker.com ---

pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.

--- Content provided by FirstRanker.com ---

So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.

--- Content provided by FirstRanker.com ---

Applications :
1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?

--- Content provided by FirstRanker.com ---

3. What are the functions of pull- up resistors?
4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?

--- Content provided by FirstRanker.com ---

8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.

--- Content provided by FirstRanker.com ---

12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?

--- Content provided by FirstRanker.com ---

17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored

--- Content provided by FirstRanker.com ---

messages inside EEPROM.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:
I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.

--- Content provided by FirstRanker.com ---

EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,

--- Content provided by FirstRanker.com ---

calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled

--- Content provided by FirstRanker.com ---

drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and

--- Content provided by FirstRanker.com ---

executed successfully and the memory content is verified on Win x talk terminal.
Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers

--- Content provided by FirstRanker.com ---

4. And also in embedded systems where program need not to be changed.


1. How does I2C protocol work?
2. What is EEPROM?

--- Content provided by FirstRanker.com ---

3. What is meant by master slave mode?
4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?

--- Content provided by FirstRanker.com ---

8. What are the registers used for enabling an interrupt?
9. What is PROM?
10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?

--- Content provided by FirstRanker.com ---

13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.

--- Content provided by FirstRanker.com ---

18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION

--- Content provided by FirstRanker.com ---

USING LPC2148
Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core

--- Content provided by FirstRanker.com ---

services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the

--- Content provided by FirstRanker.com ---

tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?

--- Content provided by FirstRanker.com ---

5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.

--- Content provided by FirstRanker.com ---

10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

--- Content provided by FirstRanker.com ---

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
External Interrupts:

--- Content provided by FirstRanker.com ---

An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the

--- Content provided by FirstRanker.com ---

external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:

--- Content provided by FirstRanker.com ---

Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts
Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering

--- Content provided by FirstRanker.com ---

3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?
3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?

--- Content provided by FirstRanker.com ---

6. What is interrupt pipelining?
7. What is pipeline shutdown?
8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?

--- Content provided by FirstRanker.com ---

11. What is PTM?
12. What is ITM?
13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:

--- Content provided by FirstRanker.com ---

LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.

--- Content provided by FirstRanker.com ---

The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00



Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.


FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.

--- Content provided by FirstRanker.com ---

2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones

--- Content provided by FirstRanker.com ---

2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?

--- Content provided by FirstRanker.com ---

5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?

--- Content provided by FirstRanker.com ---

10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?

--- Content provided by FirstRanker.com ---

15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the

--- Content provided by FirstRanker.com ---

computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.

--- Content provided by FirstRanker.com ---

The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function

--- Content provided by FirstRanker.com ---

Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and

--- Content provided by FirstRanker.com ---

executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:

--- Content provided by FirstRanker.com ---

1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?

--- Content provided by FirstRanker.com ---

4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?

--- Content provided by FirstRanker.com ---

9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE

--- Content provided by FirstRanker.com ---

WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter

--- Content provided by FirstRanker.com ---

(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,

--- Content provided by FirstRanker.com ---

Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores

--- Content provided by FirstRanker.com ---

the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :

--- Content provided by FirstRanker.com ---

1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?

--- Content provided by FirstRanker.com ---

3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-

--- Content provided by FirstRanker.com ---

weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?

--- Content provided by FirstRanker.com ---

12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along

--- Content provided by FirstRanker.com ---

with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches

--- Content provided by FirstRanker.com ---

connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of

--- Content provided by FirstRanker.com ---

LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?

--- Content provided by FirstRanker.com ---

4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?

--- Content provided by FirstRanker.com ---

9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?

--- Content provided by FirstRanker.com ---

14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?

--- Content provided by FirstRanker.com ---

19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK

--- Content provided by FirstRanker.com ---

AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the

--- Content provided by FirstRanker.com ---

date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers

--- Content provided by FirstRanker.com ---

2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?

--- Content provided by FirstRanker.com ---

5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?

--- Content provided by FirstRanker.com ---

10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?

--- Content provided by FirstRanker.com ---

15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not

--- Content provided by FirstRanker.com ---

connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :

--- Content provided by FirstRanker.com ---

1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?

--- Content provided by FirstRanker.com ---

4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?

--- Content provided by FirstRanker.com ---

9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?

--- Content provided by FirstRanker.com ---

18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:

--- Content provided by FirstRanker.com ---

EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration

--- Content provided by FirstRanker.com ---

Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial

--- Content provided by FirstRanker.com ---

EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?

--- Content provided by FirstRanker.com ---

4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?

--- Content provided by FirstRanker.com ---

9. What is PROM?
10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?

--- Content provided by FirstRanker.com ---

14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?

--- Content provided by FirstRanker.com ---

19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this

--- Content provided by FirstRanker.com ---

message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.

--- Content provided by FirstRanker.com ---

The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?

--- Content provided by FirstRanker.com ---

6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.

--- Content provided by FirstRanker.com ---

11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:

--- Content provided by FirstRanker.com ---

To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or

--- Content provided by FirstRanker.com ---

monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and

--- Content provided by FirstRanker.com ---

programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:

--- Content provided by FirstRanker.com ---

Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with

--- Content provided by FirstRanker.com ---

interrrupts
Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging

--- Content provided by FirstRanker.com ---

4. In bioinformatics and voice recognition



1. When is an Interrupt Request received?

--- Content provided by FirstRanker.com ---

2. What is ISR?
3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?

--- Content provided by FirstRanker.com ---

7. What is pipeline shutdown?
8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?

--- Content provided by FirstRanker.com ---

12. What is ITM?
13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital

--- Content provided by FirstRanker.com ---

states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?

--- Content provided by FirstRanker.com ---

P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface LED lights via the input output port and control them

--- Content provided by FirstRanker.com ---

Applications:
1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?

--- Content provided by FirstRanker.com ---

4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?

--- Content provided by FirstRanker.com ---

9. Where LEDs are used?
10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?

--- Content provided by FirstRanker.com ---

14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________

--- Content provided by FirstRanker.com ---

Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and

--- Content provided by FirstRanker.com ---

training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels

--- Content provided by FirstRanker.com ---

? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to

--- Content provided by FirstRanker.com ---

shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry

--- Content provided by FirstRanker.com ---

? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION

--- Content provided by FirstRanker.com ---

VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge

--- Content provided by FirstRanker.com ---

to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions

--- Content provided by FirstRanker.com ---

3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in

--- Content provided by FirstRanker.com ---

the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field

--- Content provided by FirstRanker.com ---

b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems

--- Content provided by FirstRanker.com ---

e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility

--- Content provided by FirstRanker.com ---

i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems

--- Content provided by FirstRanker.com ---

? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:

--- Content provided by FirstRanker.com ---

1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD

--- Content provided by FirstRanker.com ---

6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor

--- Content provided by FirstRanker.com ---

11. Implementing zigbee protocol with ARM



? Write programs in ARM for a specific Application

--- Content provided by FirstRanker.com ---

? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system

--- Content provided by FirstRanker.com ---

COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.

--- Content provided by FirstRanker.com ---

CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16

--- Content provided by FirstRanker.com ---

3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5

--- Content provided by FirstRanker.com ---

Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31

--- Content provided by FirstRanker.com ---

CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43

--- Content provided by FirstRanker.com ---

12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:

--- Content provided by FirstRanker.com ---

To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These

--- Content provided by FirstRanker.com ---

are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power

--- Content provided by FirstRanker.com ---

consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital

--- Content provided by FirstRanker.com ---

televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high

--- Content provided by FirstRanker.com ---

end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.

--- Content provided by FirstRanker.com ---

3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with

--- Content provided by FirstRanker.com ---

conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.

--- Content provided by FirstRanker.com ---

9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.

--- Content provided by FirstRanker.com ---

13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.

--- Content provided by FirstRanker.com ---

16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit

--- Content provided by FirstRanker.com ---

5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted

--- Content provided by FirstRanker.com ---

into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.

--- Content provided by FirstRanker.com ---

Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and

--- Content provided by FirstRanker.com ---

its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:

--- Content provided by FirstRanker.com ---

ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books

--- Content provided by FirstRanker.com ---

3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?

--- Content provided by FirstRanker.com ---

6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?

--- Content provided by FirstRanker.com ---

11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?

--- Content provided by FirstRanker.com ---

16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and

--- Content provided by FirstRanker.com ---

convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is

--- Content provided by FirstRanker.com ---

the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the

--- Content provided by FirstRanker.com ---

A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins

--- Content provided by FirstRanker.com ---

as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.

--- Content provided by FirstRanker.com ---

2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?

--- Content provided by FirstRanker.com ---

5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?

--- Content provided by FirstRanker.com ---

10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or

--- Content provided by FirstRanker.com ---

voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for

--- Content provided by FirstRanker.com ---

industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,

--- Content provided by FirstRanker.com ---

Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and

--- Content provided by FirstRanker.com ---

out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.

--- Content provided by FirstRanker.com ---

2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?

--- Content provided by FirstRanker.com ---

4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?

--- Content provided by FirstRanker.com ---

8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?

--- Content provided by FirstRanker.com ---

13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6

--- Content provided by FirstRanker.com ---

(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED

--- Content provided by FirstRanker.com ---

will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :

--- Content provided by FirstRanker.com ---

1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED

--- Content provided by FirstRanker.com ---

5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?

--- Content provided by FirstRanker.com ---

10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?

--- Content provided by FirstRanker.com ---

15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?

--- Content provided by FirstRanker.com ---

20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt

--- Content provided by FirstRanker.com ---

service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?

--- Content provided by FirstRanker.com ---

6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.

--- Content provided by FirstRanker.com ---

11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection

--- Content provided by FirstRanker.com ---

between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system

--- Content provided by FirstRanker.com ---

2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?

--- Content provided by FirstRanker.com ---

5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?

--- Content provided by FirstRanker.com ---

10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?

--- Content provided by FirstRanker.com ---

19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):

--- Content provided by FirstRanker.com ---

The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only

--- Content provided by FirstRanker.com ---

memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based

--- Content provided by FirstRanker.com ---

EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &

--- Content provided by FirstRanker.com ---

SCL I2C lines.



32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?

--- Content provided by FirstRanker.com ---

5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?

--- Content provided by FirstRanker.com ---

10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?

--- Content provided by FirstRanker.com ---

15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?

--- Content provided by FirstRanker.com ---

20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that

--- Content provided by FirstRanker.com ---

the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.

--- Content provided by FirstRanker.com ---

Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in Acorn RISC PC700

--- Content provided by FirstRanker.com ---

2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player


1. What is IPC?

--- Content provided by FirstRanker.com ---

2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt

--- Content provided by FirstRanker.com ---

7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and

--- Content provided by FirstRanker.com ---

FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.

--- Content provided by FirstRanker.com ---

Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7

--- Content provided by FirstRanker.com ---

LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM

--- Content provided by FirstRanker.com ---

counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts

--- Content provided by FirstRanker.com ---

Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?

--- Content provided by FirstRanker.com ---

3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?
7. What is pipeline shutdown?

--- Content provided by FirstRanker.com ---

8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?
12. What is ITM?

--- Content provided by FirstRanker.com ---

13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse

--- Content provided by FirstRanker.com ---

click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface LED lights via the input output port and control them
Applications:

--- Content provided by FirstRanker.com ---

1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?
4. What are the Pins which are used to connect LEDs?

--- Content provided by FirstRanker.com ---

5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?
9. Where LEDs are used?

--- Content provided by FirstRanker.com ---

10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?
14. What is an anti collision rate light?

--- Content provided by FirstRanker.com ---

15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 11 STEPPER MOTOR INTERFACE WITH
ARM -7 LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).

--- Content provided by FirstRanker.com ---

Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in
the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage

--- Content provided by FirstRanker.com ---

only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil
wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using

--- Content provided by FirstRanker.com ---

soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is
turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way

--- Content provided by FirstRanker.com ---

to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.


FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.

--- Content provided by FirstRanker.com ---

2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones

--- Content provided by FirstRanker.com ---

2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?

--- Content provided by FirstRanker.com ---

5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?

--- Content provided by FirstRanker.com ---

10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?

--- Content provided by FirstRanker.com ---

15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the

--- Content provided by FirstRanker.com ---

computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.

--- Content provided by FirstRanker.com ---

The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function

--- Content provided by FirstRanker.com ---

Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and

--- Content provided by FirstRanker.com ---

executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:

--- Content provided by FirstRanker.com ---

1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?

--- Content provided by FirstRanker.com ---

4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?

--- Content provided by FirstRanker.com ---

9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE

--- Content provided by FirstRanker.com ---

WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter

--- Content provided by FirstRanker.com ---

(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,

--- Content provided by FirstRanker.com ---

Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores

--- Content provided by FirstRanker.com ---

the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :

--- Content provided by FirstRanker.com ---

1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?

--- Content provided by FirstRanker.com ---

3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-

--- Content provided by FirstRanker.com ---

weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?

--- Content provided by FirstRanker.com ---

12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along

--- Content provided by FirstRanker.com ---

with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches

--- Content provided by FirstRanker.com ---

connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of

--- Content provided by FirstRanker.com ---

LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?

--- Content provided by FirstRanker.com ---

4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?

--- Content provided by FirstRanker.com ---

9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?

--- Content provided by FirstRanker.com ---

14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?

--- Content provided by FirstRanker.com ---

19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK

--- Content provided by FirstRanker.com ---

AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the

--- Content provided by FirstRanker.com ---

date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers

--- Content provided by FirstRanker.com ---

2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?

--- Content provided by FirstRanker.com ---

5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?

--- Content provided by FirstRanker.com ---

10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?

--- Content provided by FirstRanker.com ---

15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not

--- Content provided by FirstRanker.com ---

connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :

--- Content provided by FirstRanker.com ---

1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?

--- Content provided by FirstRanker.com ---

4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?

--- Content provided by FirstRanker.com ---

9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?

--- Content provided by FirstRanker.com ---

18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:

--- Content provided by FirstRanker.com ---

EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration

--- Content provided by FirstRanker.com ---

Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial

--- Content provided by FirstRanker.com ---

EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?

--- Content provided by FirstRanker.com ---

4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?

--- Content provided by FirstRanker.com ---

9. What is PROM?
10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?

--- Content provided by FirstRanker.com ---

14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?

--- Content provided by FirstRanker.com ---

19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this

--- Content provided by FirstRanker.com ---

message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.

--- Content provided by FirstRanker.com ---

The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?

--- Content provided by FirstRanker.com ---

6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.

--- Content provided by FirstRanker.com ---

11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:

--- Content provided by FirstRanker.com ---

To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or

--- Content provided by FirstRanker.com ---

monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and

--- Content provided by FirstRanker.com ---

programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:

--- Content provided by FirstRanker.com ---

Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with

--- Content provided by FirstRanker.com ---

interrrupts
Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging

--- Content provided by FirstRanker.com ---

4. In bioinformatics and voice recognition



1. When is an Interrupt Request received?

--- Content provided by FirstRanker.com ---

2. What is ISR?
3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?

--- Content provided by FirstRanker.com ---

7. What is pipeline shutdown?
8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?

--- Content provided by FirstRanker.com ---

12. What is ITM?
13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital

--- Content provided by FirstRanker.com ---

states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?

--- Content provided by FirstRanker.com ---

P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface LED lights via the input output port and control them

--- Content provided by FirstRanker.com ---

Applications:
1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?

--- Content provided by FirstRanker.com ---

4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?

--- Content provided by FirstRanker.com ---

9. Where LEDs are used?
10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?

--- Content provided by FirstRanker.com ---

14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 11 STEPPER MOTOR INTERFACE WITH

--- Content provided by FirstRanker.com ---

ARM -7 LPC2148
Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in

--- Content provided by FirstRanker.com ---

the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil

--- Content provided by FirstRanker.com ---

wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is

--- Content provided by FirstRanker.com ---

turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________

--- Content provided by FirstRanker.com ---

Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and

--- Content provided by FirstRanker.com ---

training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels

--- Content provided by FirstRanker.com ---

? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to

--- Content provided by FirstRanker.com ---

shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry

--- Content provided by FirstRanker.com ---

? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION

--- Content provided by FirstRanker.com ---

VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge

--- Content provided by FirstRanker.com ---

to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions

--- Content provided by FirstRanker.com ---

3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in

--- Content provided by FirstRanker.com ---

the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field

--- Content provided by FirstRanker.com ---

b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems

--- Content provided by FirstRanker.com ---

e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility

--- Content provided by FirstRanker.com ---

i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems

--- Content provided by FirstRanker.com ---

? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:

--- Content provided by FirstRanker.com ---

1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD

--- Content provided by FirstRanker.com ---

6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor

--- Content provided by FirstRanker.com ---

11. Implementing zigbee protocol with ARM



? Write programs in ARM for a specific Application

--- Content provided by FirstRanker.com ---

? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system

--- Content provided by FirstRanker.com ---

COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.

--- Content provided by FirstRanker.com ---

CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16

--- Content provided by FirstRanker.com ---

3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5

--- Content provided by FirstRanker.com ---

Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31

--- Content provided by FirstRanker.com ---

CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43

--- Content provided by FirstRanker.com ---

12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:

--- Content provided by FirstRanker.com ---

To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These

--- Content provided by FirstRanker.com ---

are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power

--- Content provided by FirstRanker.com ---

consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital

--- Content provided by FirstRanker.com ---

televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high

--- Content provided by FirstRanker.com ---

end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.

--- Content provided by FirstRanker.com ---

3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with

--- Content provided by FirstRanker.com ---

conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.

--- Content provided by FirstRanker.com ---

9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.

--- Content provided by FirstRanker.com ---

13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.

--- Content provided by FirstRanker.com ---

16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit

--- Content provided by FirstRanker.com ---

5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted

--- Content provided by FirstRanker.com ---

into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.

--- Content provided by FirstRanker.com ---

Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and

--- Content provided by FirstRanker.com ---

its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:

--- Content provided by FirstRanker.com ---

ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books

--- Content provided by FirstRanker.com ---

3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?

--- Content provided by FirstRanker.com ---

6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?

--- Content provided by FirstRanker.com ---

11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?

--- Content provided by FirstRanker.com ---

16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and

--- Content provided by FirstRanker.com ---

convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is

--- Content provided by FirstRanker.com ---

the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the

--- Content provided by FirstRanker.com ---

A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins

--- Content provided by FirstRanker.com ---

as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.

--- Content provided by FirstRanker.com ---

2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?

--- Content provided by FirstRanker.com ---

5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?

--- Content provided by FirstRanker.com ---

10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or

--- Content provided by FirstRanker.com ---

voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for

--- Content provided by FirstRanker.com ---

industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,

--- Content provided by FirstRanker.com ---

Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and

--- Content provided by FirstRanker.com ---

out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.

--- Content provided by FirstRanker.com ---

2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?

--- Content provided by FirstRanker.com ---

4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?

--- Content provided by FirstRanker.com ---

8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?

--- Content provided by FirstRanker.com ---

13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6

--- Content provided by FirstRanker.com ---

(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED

--- Content provided by FirstRanker.com ---

will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :

--- Content provided by FirstRanker.com ---

1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED

--- Content provided by FirstRanker.com ---

5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?

--- Content provided by FirstRanker.com ---

10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?

--- Content provided by FirstRanker.com ---

15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?

--- Content provided by FirstRanker.com ---

20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt

--- Content provided by FirstRanker.com ---

service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?

--- Content provided by FirstRanker.com ---

6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.

--- Content provided by FirstRanker.com ---

11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection

--- Content provided by FirstRanker.com ---

between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system

--- Content provided by FirstRanker.com ---

2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?

--- Content provided by FirstRanker.com ---

5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?

--- Content provided by FirstRanker.com ---

10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?

--- Content provided by FirstRanker.com ---

19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):

--- Content provided by FirstRanker.com ---

The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only

--- Content provided by FirstRanker.com ---

memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based

--- Content provided by FirstRanker.com ---

EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &

--- Content provided by FirstRanker.com ---

SCL I2C lines.



32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?

--- Content provided by FirstRanker.com ---

5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?

--- Content provided by FirstRanker.com ---

10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?

--- Content provided by FirstRanker.com ---

15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?

--- Content provided by FirstRanker.com ---

20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that

--- Content provided by FirstRanker.com ---

the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.

--- Content provided by FirstRanker.com ---

Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in Acorn RISC PC700

--- Content provided by FirstRanker.com ---

2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player


1. What is IPC?

--- Content provided by FirstRanker.com ---

2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt

--- Content provided by FirstRanker.com ---

7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and

--- Content provided by FirstRanker.com ---

FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.

--- Content provided by FirstRanker.com ---

Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7

--- Content provided by FirstRanker.com ---

LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM

--- Content provided by FirstRanker.com ---

counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts

--- Content provided by FirstRanker.com ---

Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?

--- Content provided by FirstRanker.com ---

3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?
7. What is pipeline shutdown?

--- Content provided by FirstRanker.com ---

8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?
12. What is ITM?

--- Content provided by FirstRanker.com ---

13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse

--- Content provided by FirstRanker.com ---

click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface LED lights via the input output port and control them
Applications:

--- Content provided by FirstRanker.com ---

1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?
4. What are the Pins which are used to connect LEDs?

--- Content provided by FirstRanker.com ---

5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?
9. Where LEDs are used?

--- Content provided by FirstRanker.com ---

10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?
14. What is an anti collision rate light?

--- Content provided by FirstRanker.com ---

15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 11 STEPPER MOTOR INTERFACE WITH
ARM -7 LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).

--- Content provided by FirstRanker.com ---

Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in
the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage

--- Content provided by FirstRanker.com ---

only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil
wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using

--- Content provided by FirstRanker.com ---

soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is
turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way

--- Content provided by FirstRanker.com ---

to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.



44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications:
3. Used for precise positioning with a motor

--- Content provided by FirstRanker.com ---

4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

1. Define GPIO.

--- Content provided by FirstRanker.com ---

2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?
6. What is serial communication?

--- Content provided by FirstRanker.com ---

7. What is parallel communication?
8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?
11. What does instruction-pipelining mean?

--- Content provided by FirstRanker.com ---

12. What is the power supply required for ARM processor?
13. What is a unit for torque?
14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?
Viva-voce

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.

--- Content provided by FirstRanker.com ---

2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones

--- Content provided by FirstRanker.com ---

2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?

--- Content provided by FirstRanker.com ---

5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?

--- Content provided by FirstRanker.com ---

10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?

--- Content provided by FirstRanker.com ---

15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the

--- Content provided by FirstRanker.com ---

computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.

--- Content provided by FirstRanker.com ---

The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function

--- Content provided by FirstRanker.com ---

Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and

--- Content provided by FirstRanker.com ---

executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:

--- Content provided by FirstRanker.com ---

1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?

--- Content provided by FirstRanker.com ---

4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?

--- Content provided by FirstRanker.com ---

9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE

--- Content provided by FirstRanker.com ---

WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter

--- Content provided by FirstRanker.com ---

(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,

--- Content provided by FirstRanker.com ---

Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores

--- Content provided by FirstRanker.com ---

the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :

--- Content provided by FirstRanker.com ---

1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?

--- Content provided by FirstRanker.com ---

3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-

--- Content provided by FirstRanker.com ---

weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?

--- Content provided by FirstRanker.com ---

12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along

--- Content provided by FirstRanker.com ---

with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches

--- Content provided by FirstRanker.com ---

connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of

--- Content provided by FirstRanker.com ---

LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?

--- Content provided by FirstRanker.com ---

4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?

--- Content provided by FirstRanker.com ---

9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?

--- Content provided by FirstRanker.com ---

14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?

--- Content provided by FirstRanker.com ---

19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK

--- Content provided by FirstRanker.com ---

AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the

--- Content provided by FirstRanker.com ---

date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers

--- Content provided by FirstRanker.com ---

2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?

--- Content provided by FirstRanker.com ---

5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?

--- Content provided by FirstRanker.com ---

10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?

--- Content provided by FirstRanker.com ---

15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not

--- Content provided by FirstRanker.com ---

connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :

--- Content provided by FirstRanker.com ---

1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?

--- Content provided by FirstRanker.com ---

4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?

--- Content provided by FirstRanker.com ---

9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?

--- Content provided by FirstRanker.com ---

18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:

--- Content provided by FirstRanker.com ---

EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration

--- Content provided by FirstRanker.com ---

Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial

--- Content provided by FirstRanker.com ---

EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?

--- Content provided by FirstRanker.com ---

4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?

--- Content provided by FirstRanker.com ---

9. What is PROM?
10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?

--- Content provided by FirstRanker.com ---

14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?

--- Content provided by FirstRanker.com ---

19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this

--- Content provided by FirstRanker.com ---

message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.

--- Content provided by FirstRanker.com ---

The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?

--- Content provided by FirstRanker.com ---

6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.

--- Content provided by FirstRanker.com ---

11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:

--- Content provided by FirstRanker.com ---

To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or

--- Content provided by FirstRanker.com ---

monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and

--- Content provided by FirstRanker.com ---

programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:

--- Content provided by FirstRanker.com ---

Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with

--- Content provided by FirstRanker.com ---

interrrupts
Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging

--- Content provided by FirstRanker.com ---

4. In bioinformatics and voice recognition



1. When is an Interrupt Request received?

--- Content provided by FirstRanker.com ---

2. What is ISR?
3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?

--- Content provided by FirstRanker.com ---

7. What is pipeline shutdown?
8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?

--- Content provided by FirstRanker.com ---

12. What is ITM?
13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital

--- Content provided by FirstRanker.com ---

states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?

--- Content provided by FirstRanker.com ---

P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface LED lights via the input output port and control them

--- Content provided by FirstRanker.com ---

Applications:
1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?

--- Content provided by FirstRanker.com ---

4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?

--- Content provided by FirstRanker.com ---

9. Where LEDs are used?
10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?

--- Content provided by FirstRanker.com ---

14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 11 STEPPER MOTOR INTERFACE WITH

--- Content provided by FirstRanker.com ---

ARM -7 LPC2148
Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in

--- Content provided by FirstRanker.com ---

the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil

--- Content provided by FirstRanker.com ---

wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is

--- Content provided by FirstRanker.com ---

turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications:

--- Content provided by FirstRanker.com ---

3. Used for precise positioning with a motor
4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

1. Define GPIO.
2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?

--- Content provided by FirstRanker.com ---

6. What is serial communication?
7. What is parallel communication?
8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?

--- Content provided by FirstRanker.com ---

11. What does instruction-pipelining mean?
12. What is the power supply required for ARM processor?
13. What is a unit for torque?
14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Temperature sensor
3. Interfacing cables
4. PC
Theory:
Temperature Sensor:

--- Content provided by FirstRanker.com ---

The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates

--- Content provided by FirstRanker.com ---

temperature. When the voltage increases then the temperature also rises. We can see this operation by
using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface

--- Content provided by FirstRanker.com ---

? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system

--- Content provided by FirstRanker.com ---

2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt

--- Content provided by FirstRanker.com ---

7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations

--- Content provided by FirstRanker.com ---

? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES

--- Content provided by FirstRanker.com ---

COURSE OUTCOMES



6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3

--- Content provided by FirstRanker.com ---

Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25

--- Content provided by FirstRanker.com ---

6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47

--- Content provided by FirstRanker.com ---

13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS

--- Content provided by FirstRanker.com ---

14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components

--- Content provided by FirstRanker.com ---

required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad

--- Content provided by FirstRanker.com ---

computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been

--- Content provided by FirstRanker.com ---

produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set

--- Content provided by FirstRanker.com ---

architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:

--- Content provided by FirstRanker.com ---

1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real

--- Content provided by FirstRanker.com ---

Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.

--- Content provided by FirstRanker.com ---

6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with

--- Content provided by FirstRanker.com ---

buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with

--- Content provided by FirstRanker.com ---

an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or

--- Content provided by FirstRanker.com ---

Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:

--- Content provided by FirstRanker.com ---

1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator

--- Content provided by FirstRanker.com ---

6. UART



10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.

--- Content provided by FirstRanker.com ---

Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.

--- Content provided by FirstRanker.com ---

Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?

--- Content provided by FirstRanker.com ---

Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

UART:

--- Content provided by FirstRanker.com ---

LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup

--- Content provided by FirstRanker.com ---

required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers

--- Content provided by FirstRanker.com ---

4. Digital TV
5. Home Gateways


1. What are the basic units of ARM 7?

--- Content provided by FirstRanker.com ---

2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?

--- Content provided by FirstRanker.com ---

7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt

--- Content provided by FirstRanker.com ---

12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete

--- Content provided by FirstRanker.com ---

digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to

--- Content provided by FirstRanker.com ---

scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards

--- Content provided by FirstRanker.com ---

3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?

--- Content provided by FirstRanker.com ---

6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?

--- Content provided by FirstRanker.com ---

11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog

--- Content provided by FirstRanker.com ---

real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection

--- Content provided by FirstRanker.com ---

there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the

--- Content provided by FirstRanker.com ---

master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any

--- Content provided by FirstRanker.com ---

unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI

--- Content provided by FirstRanker.com ---

connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are

--- Content provided by FirstRanker.com ---

written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.
2. Video encoder

--- Content provided by FirstRanker.com ---

3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?

--- Content provided by FirstRanker.com ---

5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?

--- Content provided by FirstRanker.com ---

9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.

--- Content provided by FirstRanker.com ---

14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
LPC2148 supports 2 types of PWM:

--- Content provided by FirstRanker.com ---

1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x

--- Content provided by FirstRanker.com ---

MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and

--- Content provided by FirstRanker.com ---

output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :
1. In Visual signals to covey a message

--- Content provided by FirstRanker.com ---

2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?

--- Content provided by FirstRanker.com ---

6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?

--- Content provided by FirstRanker.com ---

11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?

--- Content provided by FirstRanker.com ---

16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never

--- Content provided by FirstRanker.com ---

resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?

--- Content provided by FirstRanker.com ---

2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?

--- Content provided by FirstRanker.com ---

7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.

--- Content provided by FirstRanker.com ---

12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and

--- Content provided by FirstRanker.com ---

columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are

--- Content provided by FirstRanker.com ---

connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit Diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system
2. Security system with user changeable

--- Content provided by FirstRanker.com ---

3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.

--- Content provided by FirstRanker.com ---

6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by

--- Content provided by FirstRanker.com ---

CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?

--- Content provided by FirstRanker.com ---

15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between

--- Content provided by FirstRanker.com ---

integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of

--- Content provided by FirstRanker.com ---

higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a

--- Content provided by FirstRanker.com ---

command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. ROM used in toys,automobiles to store data when power is off

--- Content provided by FirstRanker.com ---

2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?
5. What is an interrupt?

--- Content provided by FirstRanker.com ---

6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?
10. What is EPROM?

--- Content provided by FirstRanker.com ---

11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?
15. What is non maskable interrupt?

--- Content provided by FirstRanker.com ---

16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.

--- Content provided by FirstRanker.com ---

The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.
Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:

--- Content provided by FirstRanker.com ---

Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger

--- Content provided by FirstRanker.com ---

3. Used in Meizu M6 MINI player


1. What is IPC?
2. Define Queue.

--- Content provided by FirstRanker.com ---

3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt
7. What is branch prediction?

--- Content provided by FirstRanker.com ---

8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 9 INTERRUPT PERFORMANCE

--- Content provided by FirstRanker.com ---

CHARACTERISTICSOF ARM AND FPGA

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:

--- Content provided by FirstRanker.com ---

When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &

--- Content provided by FirstRanker.com ---

P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing

--- Content provided by FirstRanker.com ---

and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts
Applications:

--- Content provided by FirstRanker.com ---

1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?
3. How do you initialize interrupt?

--- Content provided by FirstRanker.com ---

4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?
7. What is pipeline shutdown?
8. What is branch prediction?

--- Content provided by FirstRanker.com ---

9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?
12. What is ITM?
13. What is ETM?

--- Content provided by FirstRanker.com ---

14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 10 FLASHING OF LEDS

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by

--- Content provided by FirstRanker.com ---

turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface LED lights via the input output port and control them
Applications:
1. In Illumination

--- Content provided by FirstRanker.com ---

2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?
4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?

--- Content provided by FirstRanker.com ---

6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?
9. Where LEDs are used?
10. What is the use of flash magic software?

--- Content provided by FirstRanker.com ---

11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?
14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 11 STEPPER MOTOR INTERFACE WITH
ARM -7 LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of

--- Content provided by FirstRanker.com ---

poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in
the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the

--- Content provided by FirstRanker.com ---

motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil
wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent

--- Content provided by FirstRanker.com ---

torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is
turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.
Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational

--- Content provided by FirstRanker.com ---

movements

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
3. Used for precise positioning with a motor
4. Used in hard disk drives, robotics

--- Content provided by FirstRanker.com ---

5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

1. Define GPIO.
2. What is the function of ULN2803?

--- Content provided by FirstRanker.com ---

3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?
6. What is serial communication?
7. What is parallel communication?

--- Content provided by FirstRanker.com ---

8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?
11. What does instruction-pipelining mean?
12. What is the power supply required for ARM processor?

--- Content provided by FirstRanker.com ---

13. What is a unit for torque?
14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?
Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148
Aim:
To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and

--- Content provided by FirstRanker.com ---

display the room temperature value on the screen.
Apparatus Required:
1. LPC2148 ARM development board
2. Temperature sensor
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Temperature Sensor:
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output

--- Content provided by FirstRanker.com ---

that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates
temperature. When the voltage increases then the temperature also rises. We can see this operation by
using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.

--- Content provided by FirstRanker.com ---

2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones

--- Content provided by FirstRanker.com ---

2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?

--- Content provided by FirstRanker.com ---

5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?

--- Content provided by FirstRanker.com ---

10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?

--- Content provided by FirstRanker.com ---

15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the

--- Content provided by FirstRanker.com ---

computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.

--- Content provided by FirstRanker.com ---

The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function

--- Content provided by FirstRanker.com ---

Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and

--- Content provided by FirstRanker.com ---

executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:

--- Content provided by FirstRanker.com ---

1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?

--- Content provided by FirstRanker.com ---

4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?

--- Content provided by FirstRanker.com ---

9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE

--- Content provided by FirstRanker.com ---

WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter

--- Content provided by FirstRanker.com ---

(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,

--- Content provided by FirstRanker.com ---

Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores

--- Content provided by FirstRanker.com ---

the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :

--- Content provided by FirstRanker.com ---

1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?

--- Content provided by FirstRanker.com ---

3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-

--- Content provided by FirstRanker.com ---

weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?

--- Content provided by FirstRanker.com ---

12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along

--- Content provided by FirstRanker.com ---

with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches

--- Content provided by FirstRanker.com ---

connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of

--- Content provided by FirstRanker.com ---

LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?

--- Content provided by FirstRanker.com ---

4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?

--- Content provided by FirstRanker.com ---

9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?

--- Content provided by FirstRanker.com ---

14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?

--- Content provided by FirstRanker.com ---

19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK

--- Content provided by FirstRanker.com ---

AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the

--- Content provided by FirstRanker.com ---

date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers

--- Content provided by FirstRanker.com ---

2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?

--- Content provided by FirstRanker.com ---

5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?

--- Content provided by FirstRanker.com ---

10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?

--- Content provided by FirstRanker.com ---

15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not

--- Content provided by FirstRanker.com ---

connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :

--- Content provided by FirstRanker.com ---

1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?

--- Content provided by FirstRanker.com ---

4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?

--- Content provided by FirstRanker.com ---

9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?

--- Content provided by FirstRanker.com ---

18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:

--- Content provided by FirstRanker.com ---

EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration

--- Content provided by FirstRanker.com ---

Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial

--- Content provided by FirstRanker.com ---

EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?

--- Content provided by FirstRanker.com ---

4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?

--- Content provided by FirstRanker.com ---

9. What is PROM?
10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?

--- Content provided by FirstRanker.com ---

14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?

--- Content provided by FirstRanker.com ---

19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this

--- Content provided by FirstRanker.com ---

message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.

--- Content provided by FirstRanker.com ---

The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?

--- Content provided by FirstRanker.com ---

6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.

--- Content provided by FirstRanker.com ---

11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:

--- Content provided by FirstRanker.com ---

To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or

--- Content provided by FirstRanker.com ---

monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and

--- Content provided by FirstRanker.com ---

programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:

--- Content provided by FirstRanker.com ---

Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with

--- Content provided by FirstRanker.com ---

interrrupts
Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging

--- Content provided by FirstRanker.com ---

4. In bioinformatics and voice recognition



1. When is an Interrupt Request received?

--- Content provided by FirstRanker.com ---

2. What is ISR?
3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?

--- Content provided by FirstRanker.com ---

7. What is pipeline shutdown?
8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?

--- Content provided by FirstRanker.com ---

12. What is ITM?
13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital

--- Content provided by FirstRanker.com ---

states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?

--- Content provided by FirstRanker.com ---

P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface LED lights via the input output port and control them

--- Content provided by FirstRanker.com ---

Applications:
1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?

--- Content provided by FirstRanker.com ---

4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?

--- Content provided by FirstRanker.com ---

9. Where LEDs are used?
10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?

--- Content provided by FirstRanker.com ---

14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 11 STEPPER MOTOR INTERFACE WITH

--- Content provided by FirstRanker.com ---

ARM -7 LPC2148
Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in

--- Content provided by FirstRanker.com ---

the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil

--- Content provided by FirstRanker.com ---

wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is

--- Content provided by FirstRanker.com ---

turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications:

--- Content provided by FirstRanker.com ---

3. Used for precise positioning with a motor
4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

1. Define GPIO.
2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?

--- Content provided by FirstRanker.com ---

6. What is serial communication?
7. What is parallel communication?
8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?

--- Content provided by FirstRanker.com ---

11. What does instruction-pipelining mean?
12. What is the power supply required for ARM processor?
13. What is a unit for torque?
14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Temperature sensor
3. Interfacing cables
4. PC
Theory:
Temperature Sensor:

--- Content provided by FirstRanker.com ---

The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates

--- Content provided by FirstRanker.com ---

temperature. When the voltage increases then the temperature also rises. We can see this operation by
using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing temperature sensor with ARM controller is written and executed and
the temperature reading is seen on the monitor.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface different sensors with in-built ADC of the ARM processor and access the data
produced from them
Applications:
1. Used in Ovens, refrigerators
2. In HVAC environmental control

--- Content provided by FirstRanker.com ---

3. coolant or cylinder head temperatures
4. in the automotive industry to monitor air intake

--- Content provided by FirstRanker.com ---

1. What is LM35?
2. Define ISP.
3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?
4. What is the main function of analog pin in LPC 2148?
5. What is the output voltage produced by LM35 for one degree temperature?

--- Content provided by FirstRanker.com ---

6. What is the difference between LM 34 and LM 35 sensors?
7. How many pins are available in LM35?
8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?
9. What is operating the operating temperature range in LM35?
10. Why LM35 is used to Measure Temperature?

--- Content provided by FirstRanker.com ---

11. List the devices used to sense temperature.
12. What is the purpose of a thermocouple?
13. What is the output voltage of a thermocouple?
Viva-voce

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________

--- Content provided by FirstRanker.com ---

Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and

--- Content provided by FirstRanker.com ---

training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels

--- Content provided by FirstRanker.com ---

? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to

--- Content provided by FirstRanker.com ---

shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry

--- Content provided by FirstRanker.com ---

? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION

--- Content provided by FirstRanker.com ---

VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge

--- Content provided by FirstRanker.com ---

to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions

--- Content provided by FirstRanker.com ---

3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in

--- Content provided by FirstRanker.com ---

the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field

--- Content provided by FirstRanker.com ---

b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems

--- Content provided by FirstRanker.com ---

e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility

--- Content provided by FirstRanker.com ---

i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems

--- Content provided by FirstRanker.com ---

? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:

--- Content provided by FirstRanker.com ---

1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD

--- Content provided by FirstRanker.com ---

6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor

--- Content provided by FirstRanker.com ---

11. Implementing zigbee protocol with ARM



? Write programs in ARM for a specific Application

--- Content provided by FirstRanker.com ---

? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system

--- Content provided by FirstRanker.com ---

COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.

--- Content provided by FirstRanker.com ---

CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16

--- Content provided by FirstRanker.com ---

3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5

--- Content provided by FirstRanker.com ---

Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31

--- Content provided by FirstRanker.com ---

CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43

--- Content provided by FirstRanker.com ---

12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:

--- Content provided by FirstRanker.com ---

To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These

--- Content provided by FirstRanker.com ---

are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power

--- Content provided by FirstRanker.com ---

consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital

--- Content provided by FirstRanker.com ---

televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high

--- Content provided by FirstRanker.com ---

end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.

--- Content provided by FirstRanker.com ---

3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with

--- Content provided by FirstRanker.com ---

conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.

--- Content provided by FirstRanker.com ---

9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.

--- Content provided by FirstRanker.com ---

13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.

--- Content provided by FirstRanker.com ---

16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit

--- Content provided by FirstRanker.com ---

5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted

--- Content provided by FirstRanker.com ---

into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.

--- Content provided by FirstRanker.com ---

Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and

--- Content provided by FirstRanker.com ---

its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:

--- Content provided by FirstRanker.com ---

ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books

--- Content provided by FirstRanker.com ---

3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?

--- Content provided by FirstRanker.com ---

6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?

--- Content provided by FirstRanker.com ---

11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?

--- Content provided by FirstRanker.com ---

16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and

--- Content provided by FirstRanker.com ---

convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is

--- Content provided by FirstRanker.com ---

the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the

--- Content provided by FirstRanker.com ---

A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins

--- Content provided by FirstRanker.com ---

as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.

--- Content provided by FirstRanker.com ---

2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?

--- Content provided by FirstRanker.com ---

5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?

--- Content provided by FirstRanker.com ---

10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or

--- Content provided by FirstRanker.com ---

voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for

--- Content provided by FirstRanker.com ---

industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,

--- Content provided by FirstRanker.com ---

Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and

--- Content provided by FirstRanker.com ---

out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.

--- Content provided by FirstRanker.com ---

2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?

--- Content provided by FirstRanker.com ---

4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?

--- Content provided by FirstRanker.com ---

8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?

--- Content provided by FirstRanker.com ---

13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6

--- Content provided by FirstRanker.com ---

(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED

--- Content provided by FirstRanker.com ---

will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :

--- Content provided by FirstRanker.com ---

1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED

--- Content provided by FirstRanker.com ---

5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?

--- Content provided by FirstRanker.com ---

10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?

--- Content provided by FirstRanker.com ---

15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?

--- Content provided by FirstRanker.com ---

20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt

--- Content provided by FirstRanker.com ---

service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?

--- Content provided by FirstRanker.com ---

6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.

--- Content provided by FirstRanker.com ---

11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection

--- Content provided by FirstRanker.com ---

between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system

--- Content provided by FirstRanker.com ---

2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?

--- Content provided by FirstRanker.com ---

5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?

--- Content provided by FirstRanker.com ---

10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?

--- Content provided by FirstRanker.com ---

19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):

--- Content provided by FirstRanker.com ---

The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only

--- Content provided by FirstRanker.com ---

memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based

--- Content provided by FirstRanker.com ---

EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &

--- Content provided by FirstRanker.com ---

SCL I2C lines.



32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?

--- Content provided by FirstRanker.com ---

5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?

--- Content provided by FirstRanker.com ---

10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?

--- Content provided by FirstRanker.com ---

15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?

--- Content provided by FirstRanker.com ---

20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that

--- Content provided by FirstRanker.com ---

the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.

--- Content provided by FirstRanker.com ---

Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in Acorn RISC PC700

--- Content provided by FirstRanker.com ---

2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player


1. What is IPC?

--- Content provided by FirstRanker.com ---

2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt

--- Content provided by FirstRanker.com ---

7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and

--- Content provided by FirstRanker.com ---

FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.

--- Content provided by FirstRanker.com ---

Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7

--- Content provided by FirstRanker.com ---

LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM

--- Content provided by FirstRanker.com ---

counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts

--- Content provided by FirstRanker.com ---

Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?

--- Content provided by FirstRanker.com ---

3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?
7. What is pipeline shutdown?

--- Content provided by FirstRanker.com ---

8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?
12. What is ITM?

--- Content provided by FirstRanker.com ---

13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse

--- Content provided by FirstRanker.com ---

click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface LED lights via the input output port and control them
Applications:

--- Content provided by FirstRanker.com ---

1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?
4. What are the Pins which are used to connect LEDs?

--- Content provided by FirstRanker.com ---

5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?
9. Where LEDs are used?

--- Content provided by FirstRanker.com ---

10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?
14. What is an anti collision rate light?

--- Content provided by FirstRanker.com ---

15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 11 STEPPER MOTOR INTERFACE WITH
ARM -7 LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).

--- Content provided by FirstRanker.com ---

Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in
the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage

--- Content provided by FirstRanker.com ---

only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil
wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using

--- Content provided by FirstRanker.com ---

soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is
turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way

--- Content provided by FirstRanker.com ---

to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.



44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications:
3. Used for precise positioning with a motor

--- Content provided by FirstRanker.com ---

4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

1. Define GPIO.

--- Content provided by FirstRanker.com ---

2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?
6. What is serial communication?

--- Content provided by FirstRanker.com ---

7. What is parallel communication?
8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?
11. What does instruction-pipelining mean?

--- Content provided by FirstRanker.com ---

12. What is the power supply required for ARM processor?
13. What is a unit for torque?
14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?
Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.
Apparatus Required:
1. LPC2148 ARM development board
2. Temperature sensor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Temperature Sensor:
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly

--- Content provided by FirstRanker.com ---

proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates
temperature. When the voltage increases then the temperature also rises. We can see this operation by

--- Content provided by FirstRanker.com ---

using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the program for interfacing temperature sensor with ARM controller is written and executed and
the temperature reading is seen on the monitor.
Outcome:
Able to interface different sensors with in-built ADC of the ARM processor and access the data

--- Content provided by FirstRanker.com ---

produced from them
Applications:
1. Used in Ovens, refrigerators
2. In HVAC environmental control
3. coolant or cylinder head temperatures

--- Content provided by FirstRanker.com ---

4. in the automotive industry to monitor air intake



1. What is LM35?

--- Content provided by FirstRanker.com ---

2. Define ISP.
3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?
4. What is the main function of analog pin in LPC 2148?
5. What is the output voltage produced by LM35 for one degree temperature?
6. What is the difference between LM 34 and LM 35 sensors?

--- Content provided by FirstRanker.com ---

7. How many pins are available in LM35?
8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?
9. What is operating the operating temperature range in LM35?
10. Why LM35 is used to Measure Temperature?
11. List the devices used to sense temperature.

--- Content provided by FirstRanker.com ---

12. What is the purpose of a thermocouple?
13. What is the output voltage of a thermocouple?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 13 IMPLEMENTATION OF WIRELESS
COMMUNICATION PROTOCOL
USING ZIGBEE WIRELESS MODULE

--- Content provided by FirstRanker.com ---

Aim:
To implement wireless communication protocol using zigbee wireless module with the help of ARM
processor
Apparatus required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. Zigbee module
5. PC
Theory:

--- Content provided by FirstRanker.com ---

ZigBee is a specification to suite high level communication protocols using small, low-power digital
radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless
protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area
Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and
receiver modules which can do point to point communication. The Xbee is the brand name a wireless

--- Content provided by FirstRanker.com ---

transceiver device introduced by the Digi international which works on the ZigBee protocol and can form
PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific
fields, medical fields etc
Digi ZigBee:
The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.

--- Content provided by FirstRanker.com ---

The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to
transmit/receive or a framed mode providing advanced features. These modules can communicate point to
point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.

--- Content provided by FirstRanker.com ---

2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones

--- Content provided by FirstRanker.com ---

2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?

--- Content provided by FirstRanker.com ---

5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?

--- Content provided by FirstRanker.com ---

10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?

--- Content provided by FirstRanker.com ---

15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the

--- Content provided by FirstRanker.com ---

computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.

--- Content provided by FirstRanker.com ---

The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function

--- Content provided by FirstRanker.com ---

Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and

--- Content provided by FirstRanker.com ---

executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:

--- Content provided by FirstRanker.com ---

1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?

--- Content provided by FirstRanker.com ---

4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?

--- Content provided by FirstRanker.com ---

9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE

--- Content provided by FirstRanker.com ---

WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter

--- Content provided by FirstRanker.com ---

(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,

--- Content provided by FirstRanker.com ---

Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores

--- Content provided by FirstRanker.com ---

the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :

--- Content provided by FirstRanker.com ---

1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?

--- Content provided by FirstRanker.com ---

3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-

--- Content provided by FirstRanker.com ---

weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?

--- Content provided by FirstRanker.com ---

12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along

--- Content provided by FirstRanker.com ---

with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches

--- Content provided by FirstRanker.com ---

connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of

--- Content provided by FirstRanker.com ---

LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?

--- Content provided by FirstRanker.com ---

4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?

--- Content provided by FirstRanker.com ---

9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?

--- Content provided by FirstRanker.com ---

14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?

--- Content provided by FirstRanker.com ---

19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK

--- Content provided by FirstRanker.com ---

AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the

--- Content provided by FirstRanker.com ---

date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers

--- Content provided by FirstRanker.com ---

2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?

--- Content provided by FirstRanker.com ---

5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?

--- Content provided by FirstRanker.com ---

10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?

--- Content provided by FirstRanker.com ---

15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not

--- Content provided by FirstRanker.com ---

connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :

--- Content provided by FirstRanker.com ---

1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?

--- Content provided by FirstRanker.com ---

4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?

--- Content provided by FirstRanker.com ---

9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?

--- Content provided by FirstRanker.com ---

18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:

--- Content provided by FirstRanker.com ---

EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration

--- Content provided by FirstRanker.com ---

Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial

--- Content provided by FirstRanker.com ---

EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?

--- Content provided by FirstRanker.com ---

4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?

--- Content provided by FirstRanker.com ---

9. What is PROM?
10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?

--- Content provided by FirstRanker.com ---

14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?

--- Content provided by FirstRanker.com ---

19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this

--- Content provided by FirstRanker.com ---

message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.

--- Content provided by FirstRanker.com ---

The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?

--- Content provided by FirstRanker.com ---

6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.

--- Content provided by FirstRanker.com ---

11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:

--- Content provided by FirstRanker.com ---

To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or

--- Content provided by FirstRanker.com ---

monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and

--- Content provided by FirstRanker.com ---

programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:

--- Content provided by FirstRanker.com ---

Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with

--- Content provided by FirstRanker.com ---

interrrupts
Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging

--- Content provided by FirstRanker.com ---

4. In bioinformatics and voice recognition



1. When is an Interrupt Request received?

--- Content provided by FirstRanker.com ---

2. What is ISR?
3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?

--- Content provided by FirstRanker.com ---

7. What is pipeline shutdown?
8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?

--- Content provided by FirstRanker.com ---

12. What is ITM?
13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital

--- Content provided by FirstRanker.com ---

states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?

--- Content provided by FirstRanker.com ---

P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface LED lights via the input output port and control them

--- Content provided by FirstRanker.com ---

Applications:
1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?

--- Content provided by FirstRanker.com ---

4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?

--- Content provided by FirstRanker.com ---

9. Where LEDs are used?
10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?

--- Content provided by FirstRanker.com ---

14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 11 STEPPER MOTOR INTERFACE WITH

--- Content provided by FirstRanker.com ---

ARM -7 LPC2148
Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in

--- Content provided by FirstRanker.com ---

the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil

--- Content provided by FirstRanker.com ---

wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is

--- Content provided by FirstRanker.com ---

turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications:

--- Content provided by FirstRanker.com ---

3. Used for precise positioning with a motor
4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

1. Define GPIO.
2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?

--- Content provided by FirstRanker.com ---

6. What is serial communication?
7. What is parallel communication?
8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?

--- Content provided by FirstRanker.com ---

11. What does instruction-pipelining mean?
12. What is the power supply required for ARM processor?
13. What is a unit for torque?
14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Temperature sensor
3. Interfacing cables
4. PC
Theory:
Temperature Sensor:

--- Content provided by FirstRanker.com ---

The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates

--- Content provided by FirstRanker.com ---

temperature. When the voltage increases then the temperature also rises. We can see this operation by
using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing temperature sensor with ARM controller is written and executed and
the temperature reading is seen on the monitor.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface different sensors with in-built ADC of the ARM processor and access the data
produced from them
Applications:
1. Used in Ovens, refrigerators
2. In HVAC environmental control

--- Content provided by FirstRanker.com ---

3. coolant or cylinder head temperatures
4. in the automotive industry to monitor air intake

--- Content provided by FirstRanker.com ---

1. What is LM35?
2. Define ISP.
3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?
4. What is the main function of analog pin in LPC 2148?
5. What is the output voltage produced by LM35 for one degree temperature?

--- Content provided by FirstRanker.com ---

6. What is the difference between LM 34 and LM 35 sensors?
7. How many pins are available in LM35?
8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?
9. What is operating the operating temperature range in LM35?
10. Why LM35 is used to Measure Temperature?

--- Content provided by FirstRanker.com ---

11. List the devices used to sense temperature.
12. What is the purpose of a thermocouple?
13. What is the output voltage of a thermocouple?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 13 IMPLEMENTATION OF WIRELESS
COMMUNICATION PROTOCOL

--- Content provided by FirstRanker.com ---

USING ZIGBEE WIRELESS MODULE
Aim:
To implement wireless communication protocol using zigbee wireless module with the help of ARM
processor
Apparatus required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. Zigbee module
5. PC

--- Content provided by FirstRanker.com ---

Theory:
ZigBee is a specification to suite high level communication protocols using small, low-power digital
radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless
protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area
Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and

--- Content provided by FirstRanker.com ---

receiver modules which can do point to point communication. The Xbee is the brand name a wireless
transceiver device introduced by the Digi international which works on the ZigBee protocol and can form
PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific
fields, medical fields etc
Digi ZigBee:

--- Content provided by FirstRanker.com ---

The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.
The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to
transmit/receive or a framed mode providing advanced features. These modules can communicate point to
point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the wireless communication protocol using Zigbee wireless module is implemented using

--- Content provided by FirstRanker.com ---

LPC2148.
Outcome:
Able to form a wireless network using zigbee module and ARM controller

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface

--- Content provided by FirstRanker.com ---

? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system

--- Content provided by FirstRanker.com ---

2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt

--- Content provided by FirstRanker.com ---

7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations

--- Content provided by FirstRanker.com ---

? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES

--- Content provided by FirstRanker.com ---

COURSE OUTCOMES



6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3

--- Content provided by FirstRanker.com ---

Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25

--- Content provided by FirstRanker.com ---

6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47

--- Content provided by FirstRanker.com ---

13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS

--- Content provided by FirstRanker.com ---

14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components

--- Content provided by FirstRanker.com ---

required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad

--- Content provided by FirstRanker.com ---

computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been

--- Content provided by FirstRanker.com ---

produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set

--- Content provided by FirstRanker.com ---

architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:

--- Content provided by FirstRanker.com ---

1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real

--- Content provided by FirstRanker.com ---

Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.

--- Content provided by FirstRanker.com ---

6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with

--- Content provided by FirstRanker.com ---

buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with

--- Content provided by FirstRanker.com ---

an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or

--- Content provided by FirstRanker.com ---

Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:

--- Content provided by FirstRanker.com ---

1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator

--- Content provided by FirstRanker.com ---

6. UART



10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.

--- Content provided by FirstRanker.com ---

Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.

--- Content provided by FirstRanker.com ---

Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?

--- Content provided by FirstRanker.com ---

Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

UART:

--- Content provided by FirstRanker.com ---

LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup

--- Content provided by FirstRanker.com ---

required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers

--- Content provided by FirstRanker.com ---

4. Digital TV
5. Home Gateways


1. What are the basic units of ARM 7?

--- Content provided by FirstRanker.com ---

2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?

--- Content provided by FirstRanker.com ---

7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt

--- Content provided by FirstRanker.com ---

12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete

--- Content provided by FirstRanker.com ---

digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to

--- Content provided by FirstRanker.com ---

scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards

--- Content provided by FirstRanker.com ---

3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?

--- Content provided by FirstRanker.com ---

6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?

--- Content provided by FirstRanker.com ---

11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog

--- Content provided by FirstRanker.com ---

real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection

--- Content provided by FirstRanker.com ---

there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the

--- Content provided by FirstRanker.com ---

master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any

--- Content provided by FirstRanker.com ---

unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI

--- Content provided by FirstRanker.com ---

connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are

--- Content provided by FirstRanker.com ---

written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.
2. Video encoder

--- Content provided by FirstRanker.com ---

3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?

--- Content provided by FirstRanker.com ---

5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?

--- Content provided by FirstRanker.com ---

9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.

--- Content provided by FirstRanker.com ---

14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
LPC2148 supports 2 types of PWM:

--- Content provided by FirstRanker.com ---

1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x

--- Content provided by FirstRanker.com ---

MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and

--- Content provided by FirstRanker.com ---

output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :
1. In Visual signals to covey a message

--- Content provided by FirstRanker.com ---

2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?

--- Content provided by FirstRanker.com ---

6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?

--- Content provided by FirstRanker.com ---

11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?

--- Content provided by FirstRanker.com ---

16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never

--- Content provided by FirstRanker.com ---

resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?

--- Content provided by FirstRanker.com ---

2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?

--- Content provided by FirstRanker.com ---

7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.

--- Content provided by FirstRanker.com ---

12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and

--- Content provided by FirstRanker.com ---

columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are

--- Content provided by FirstRanker.com ---

connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit Diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system
2. Security system with user changeable

--- Content provided by FirstRanker.com ---

3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.

--- Content provided by FirstRanker.com ---

6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by

--- Content provided by FirstRanker.com ---

CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?

--- Content provided by FirstRanker.com ---

15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between

--- Content provided by FirstRanker.com ---

integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of

--- Content provided by FirstRanker.com ---

higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a

--- Content provided by FirstRanker.com ---

command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. ROM used in toys,automobiles to store data when power is off

--- Content provided by FirstRanker.com ---

2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?
5. What is an interrupt?

--- Content provided by FirstRanker.com ---

6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?
10. What is EPROM?

--- Content provided by FirstRanker.com ---

11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?
15. What is non maskable interrupt?

--- Content provided by FirstRanker.com ---

16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.

--- Content provided by FirstRanker.com ---

The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.
Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:

--- Content provided by FirstRanker.com ---

Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger

--- Content provided by FirstRanker.com ---

3. Used in Meizu M6 MINI player


1. What is IPC?
2. Define Queue.

--- Content provided by FirstRanker.com ---

3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt
7. What is branch prediction?

--- Content provided by FirstRanker.com ---

8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 9 INTERRUPT PERFORMANCE

--- Content provided by FirstRanker.com ---

CHARACTERISTICSOF ARM AND FPGA

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:

--- Content provided by FirstRanker.com ---

When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &

--- Content provided by FirstRanker.com ---

P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing

--- Content provided by FirstRanker.com ---

and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts
Applications:

--- Content provided by FirstRanker.com ---

1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?
3. How do you initialize interrupt?

--- Content provided by FirstRanker.com ---

4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?
7. What is pipeline shutdown?
8. What is branch prediction?

--- Content provided by FirstRanker.com ---

9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?
12. What is ITM?
13. What is ETM?

--- Content provided by FirstRanker.com ---

14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 10 FLASHING OF LEDS

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by

--- Content provided by FirstRanker.com ---

turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface LED lights via the input output port and control them
Applications:
1. In Illumination

--- Content provided by FirstRanker.com ---

2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?
4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?

--- Content provided by FirstRanker.com ---

6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?
9. Where LEDs are used?
10. What is the use of flash magic software?

--- Content provided by FirstRanker.com ---

11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?
14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 11 STEPPER MOTOR INTERFACE WITH
ARM -7 LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of

--- Content provided by FirstRanker.com ---

poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in
the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the

--- Content provided by FirstRanker.com ---

motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil
wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent

--- Content provided by FirstRanker.com ---

torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is
turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.
Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational

--- Content provided by FirstRanker.com ---

movements

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
3. Used for precise positioning with a motor
4. Used in hard disk drives, robotics

--- Content provided by FirstRanker.com ---

5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

1. Define GPIO.
2. What is the function of ULN2803?

--- Content provided by FirstRanker.com ---

3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?
6. What is serial communication?
7. What is parallel communication?

--- Content provided by FirstRanker.com ---

8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?
11. What does instruction-pipelining mean?
12. What is the power supply required for ARM processor?

--- Content provided by FirstRanker.com ---

13. What is a unit for torque?
14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?
Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148
Aim:
To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and

--- Content provided by FirstRanker.com ---

display the room temperature value on the screen.
Apparatus Required:
1. LPC2148 ARM development board
2. Temperature sensor
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Temperature Sensor:
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output

--- Content provided by FirstRanker.com ---

that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates
temperature. When the voltage increases then the temperature also rises. We can see this operation by
using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the program for interfacing temperature sensor with ARM controller is written and executed and
the temperature reading is seen on the monitor.
Outcome:
Able to interface different sensors with in-built ADC of the ARM processor and access the data
produced from them

--- Content provided by FirstRanker.com ---

Applications:
1. Used in Ovens, refrigerators
2. In HVAC environmental control
3. coolant or cylinder head temperatures
4. in the automotive industry to monitor air intake

--- Content provided by FirstRanker.com ---

1. What is LM35?
2. Define ISP.

--- Content provided by FirstRanker.com ---

3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?
4. What is the main function of analog pin in LPC 2148?
5. What is the output voltage produced by LM35 for one degree temperature?
6. What is the difference between LM 34 and LM 35 sensors?
7. How many pins are available in LM35?

--- Content provided by FirstRanker.com ---

8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?
9. What is operating the operating temperature range in LM35?
10. Why LM35 is used to Measure Temperature?
11. List the devices used to sense temperature.
12. What is the purpose of a thermocouple?

--- Content provided by FirstRanker.com ---

13. What is the output voltage of a thermocouple?
Viva-voce

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 13 IMPLEMENTATION OF WIRELESS
COMMUNICATION PROTOCOL
USING ZIGBEE WIRELESS MODULE
Aim:

--- Content provided by FirstRanker.com ---

To implement wireless communication protocol using zigbee wireless module with the help of ARM
processor
Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. Zigbee module
5. PC
Theory:
ZigBee is a specification to suite high level communication protocols using small, low-power digital

--- Content provided by FirstRanker.com ---

radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless
protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area
Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and
receiver modules which can do point to point communication. The Xbee is the brand name a wireless
transceiver device introduced by the Digi international which works on the ZigBee protocol and can form

--- Content provided by FirstRanker.com ---

PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific
fields, medical fields etc
Digi ZigBee:
The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.
The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to

--- Content provided by FirstRanker.com ---

transmit/receive or a framed mode providing advanced features. These modules can communicate point to
point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:


Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the wireless communication protocol using Zigbee wireless module is implemented using
LPC2148.
Outcome:

--- Content provided by FirstRanker.com ---

Able to form a wireless network using zigbee module and ARM controller

--- Content provided by FirstRanker.com ---

51 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. Used in traffic lights in non-urban areas
2. Used in building control systems
3. Used in asset tracking
4. Used in parking sensors

--- Content provided by FirstRanker.com ---

1. How many UART ports available in LPC2148?

--- Content provided by FirstRanker.com ---

2. What is the main function of voltage convertors in UART?
3. Why Zigbee based is preferred for wireless communication?
4. What is the IEEE standard for Zigbee protocol?
5. Write the two modes of communication are used in a ZigBee network.
6. What is the function of a scheduler?

--- Content provided by FirstRanker.com ---

7. Mention any two features of ?C/OS ? II.
8. Write the function for creating task in ?C/OS ? II.
9. Mention any two support devices for ?C/OS ? II.
10. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?



DEPARTMENT OF

--- Content provided by FirstRanker.com ---

ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul

--- Content provided by FirstRanker.com ---

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

--- Content provided by FirstRanker.com ---

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems

--- Content provided by FirstRanker.com ---

? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION
MISSION

--- Content provided by FirstRanker.com ---

MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)

--- Content provided by FirstRanker.com ---

1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence

--- Content provided by FirstRanker.com ---

To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which

--- Content provided by FirstRanker.com ---

enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context

--- Content provided by FirstRanker.com ---

5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability

--- Content provided by FirstRanker.com ---

c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities

--- Content provided by FirstRanker.com ---

g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning

--- Content provided by FirstRanker.com ---

k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

--- Content provided by FirstRanker.com ---

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems

--- Content provided by FirstRanker.com ---

? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC

--- Content provided by FirstRanker.com ---

3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox

--- Content provided by FirstRanker.com ---

8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system

--- Content provided by FirstRanker.com ---

? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1

--- Content provided by FirstRanker.com ---

Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19

--- Content provided by FirstRanker.com ---

4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25
6

--- Content provided by FirstRanker.com ---

Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35

--- Content provided by FirstRanker.com ---

9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13

--- Content provided by FirstRanker.com ---

Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54

--- Content provided by FirstRanker.com ---

15 Relay interface with ARM? 7 57



7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.

--- Content provided by FirstRanker.com ---

Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and

--- Content provided by FirstRanker.com ---

higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used

--- Content provided by FirstRanker.com ---

architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.

--- Content provided by FirstRanker.com ---

LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide

--- Content provided by FirstRanker.com ---

interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.

--- Content provided by FirstRanker.com ---

4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.

--- Content provided by FirstRanker.com ---

7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.

--- Content provided by FirstRanker.com ---

10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz

--- Content provided by FirstRanker.com ---

14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly

--- Content provided by FirstRanker.com ---

2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

--- Content provided by FirstRanker.com ---

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.

--- Content provided by FirstRanker.com ---

Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

--- Content provided by FirstRanker.com ---

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?
Reset Circuit:

--- Content provided by FirstRanker.com ---

Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Recommended values are as shown in table:

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial

--- Content provided by FirstRanker.com ---

communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.

--- Content provided by FirstRanker.com ---

Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

Applications:

--- Content provided by FirstRanker.com ---

ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers
4. Digital TV

--- Content provided by FirstRanker.com ---

5. Home Gateways


1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?

--- Content provided by FirstRanker.com ---

3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?

--- Content provided by FirstRanker.com ---

8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?

--- Content provided by FirstRanker.com ---

13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR

--- Content provided by FirstRanker.com ---

INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the

--- Content provided by FirstRanker.com ---

moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully

--- Content provided by FirstRanker.com ---

accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog

--- Content provided by FirstRanker.com ---

quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes

--- Content provided by FirstRanker.com ---

4. Used in music reproduction technology.
5. Used in DSP if input is analog


1. What are the ADC operating modes in LPC2148?

--- Content provided by FirstRanker.com ---

2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?

--- Content provided by FirstRanker.com ---

7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?

--- Content provided by FirstRanker.com ---

12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip

--- Content provided by FirstRanker.com ---

DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to

--- Content provided by FirstRanker.com ---

implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.

--- Content provided by FirstRanker.com ---

Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave

--- Content provided by FirstRanker.com ---

Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by

--- Content provided by FirstRanker.com ---

using these four lines.
Circuit diagram:


Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.

--- Content provided by FirstRanker.com ---

Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics

--- Content provided by FirstRanker.com ---

4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?

--- Content provided by FirstRanker.com ---

6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?

--- Content provided by FirstRanker.com ---

10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?

--- Content provided by FirstRanker.com ---

15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning

--- Content provided by FirstRanker.com ---

2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.

--- Content provided by FirstRanker.com ---

The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.

--- Content provided by FirstRanker.com ---

Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects

--- Content provided by FirstRanker.com ---

3. In Narrow band sensors



1. What factors determine the LED dimming performance?

--- Content provided by FirstRanker.com ---

2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?

--- Content provided by FirstRanker.com ---

7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?

--- Content provided by FirstRanker.com ---

12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?

--- Content provided by FirstRanker.com ---

17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM

--- Content provided by FirstRanker.com ---

controller
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to

--- Content provided by FirstRanker.com ---

save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time

--- Content provided by FirstRanker.com ---

Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?

--- Content provided by FirstRanker.com ---

3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC

--- Content provided by FirstRanker.com ---

8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?

--- Content provided by FirstRanker.com ---

13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A

--- Content provided by FirstRanker.com ---

4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit Diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key

--- Content provided by FirstRanker.com ---

pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:

--- Content provided by FirstRanker.com ---

Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games

--- Content provided by FirstRanker.com ---

4. Used in portable video games and cell phones



1. What is Matrix keypad?

--- Content provided by FirstRanker.com ---

2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?

--- Content provided by FirstRanker.com ---

7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.

--- Content provided by FirstRanker.com ---

11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?

--- Content provided by FirstRanker.com ---

16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:

--- Content provided by FirstRanker.com ---

To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:
I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication

--- Content provided by FirstRanker.com ---

with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other

--- Content provided by FirstRanker.com ---

electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is

--- Content provided by FirstRanker.com ---

used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices

--- Content provided by FirstRanker.com ---

3. In laser printers
4. And also in embedded systems where program need not to be changed.


1. How does I2C protocol work?

--- Content provided by FirstRanker.com ---

2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?

--- Content provided by FirstRanker.com ---

7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?
10. What is EPROM?
11. What is mask ROM?

--- Content provided by FirstRanker.com ---

12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?

--- Content provided by FirstRanker.com ---

17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also

--- Content provided by FirstRanker.com ---

known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is

--- Content provided by FirstRanker.com ---

the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58

--- Content provided by FirstRanker.com ---

To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time

--- Content provided by FirstRanker.com ---

systems

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?

--- Content provided by FirstRanker.com ---

4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.

--- Content provided by FirstRanker.com ---

9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

--- Content provided by FirstRanker.com ---

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be

--- Content provided by FirstRanker.com ---

displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00



Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.

--- Content provided by FirstRanker.com ---

Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts
Applications:
1. Used in random logic and SPLDs

--- Content provided by FirstRanker.com ---

2. Used in cryptography and filtering
3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?
3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?

--- Content provided by FirstRanker.com ---

5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?
7. What is pipeline shutdown?
8. What is branch prediction?
9. What is the use of Neon Floating point engine?

--- Content provided by FirstRanker.com ---

10. What is the use of ?vectorize option?
11. What is PTM?
12. What is ITM?
13. What is ETM?
14. What is I2S interface?

--- Content provided by FirstRanker.com ---

15. What is the use of ?SWI? in ARM assembly?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 10 FLASHING OF LEDS
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of

--- Content provided by FirstRanker.com ---

microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface LED lights via the input output port and control them
Applications:
1. In Illumination
2. As status indicators in equipments

--- Content provided by FirstRanker.com ---

3. Stadium displays and dynamic decorative displays



1. What is seven segment displays?

--- Content provided by FirstRanker.com ---

2. What are the different configurations of LED?
3. What is the function of GPIO?
4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.

--- Content provided by FirstRanker.com ---

7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?
9. Where LEDs are used?
10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?

--- Content provided by FirstRanker.com ---

12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?
14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 11 STEPPER MOTOR INTERFACE WITH
ARM -7 LPC2148
Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor

--- Content provided by FirstRanker.com ---

in either directions.
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing

--- Content provided by FirstRanker.com ---

a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in
the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.

--- Content provided by FirstRanker.com ---

The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil
wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated

--- Content provided by FirstRanker.com ---

torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is
turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.
Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
3. Used for precise positioning with a motor
4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

1. Define GPIO.
2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?

--- Content provided by FirstRanker.com ---

4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?
6. What is serial communication?
7. What is parallel communication?
8. What is stepper motor & why it is named so?

--- Content provided by FirstRanker.com ---

9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?
11. What does instruction-pipelining mean?
12. What is the power supply required for ARM processor?
13. What is a unit for torque?

--- Content provided by FirstRanker.com ---

14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?
Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148
Aim:
To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Temperature sensor
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
Temperature Sensor:
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required

--- Content provided by FirstRanker.com ---

Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates
temperature. When the voltage increases then the temperature also rises. We can see this operation by
using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing temperature sensor with ARM controller is written and executed and

--- Content provided by FirstRanker.com ---

the temperature reading is seen on the monitor.
Outcome:
Able to interface different sensors with in-built ADC of the ARM processor and access the data
produced from them
Applications:

--- Content provided by FirstRanker.com ---

1. Used in Ovens, refrigerators
2. In HVAC environmental control
3. coolant or cylinder head temperatures
4. in the automotive industry to monitor air intake

--- Content provided by FirstRanker.com ---

1. What is LM35?
2. Define ISP.
3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?

--- Content provided by FirstRanker.com ---

4. What is the main function of analog pin in LPC 2148?
5. What is the output voltage produced by LM35 for one degree temperature?
6. What is the difference between LM 34 and LM 35 sensors?
7. How many pins are available in LM35?
8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?

--- Content provided by FirstRanker.com ---

9. What is operating the operating temperature range in LM35?
10. Why LM35 is used to Measure Temperature?
11. List the devices used to sense temperature.
12. What is the purpose of a thermocouple?
13. What is the output voltage of a thermocouple?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 13 IMPLEMENTATION OF WIRELESS
COMMUNICATION PROTOCOL
USING ZIGBEE WIRELESS MODULE
Aim:
To implement wireless communication protocol using zigbee wireless module with the help of ARM

--- Content provided by FirstRanker.com ---

processor
Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. Zigbee module
5. PC
Theory:
ZigBee is a specification to suite high level communication protocols using small, low-power digital
radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless

--- Content provided by FirstRanker.com ---

protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area
Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and
receiver modules which can do point to point communication. The Xbee is the brand name a wireless
transceiver device introduced by the Digi international which works on the ZigBee protocol and can form
PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific

--- Content provided by FirstRanker.com ---

fields, medical fields etc
Digi ZigBee:
The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.
The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to
transmit/receive or a framed mode providing advanced features. These modules can communicate point to

--- Content provided by FirstRanker.com ---

point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the wireless communication protocol using Zigbee wireless module is implemented using
LPC2148.
Outcome:
Able to form a wireless network using zigbee module and ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

51 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. Used in traffic lights in non-urban areas
2. Used in building control systems
3. Used in asset tracking
4. Used in parking sensors

--- Content provided by FirstRanker.com ---

1. How many UART ports available in LPC2148?
2. What is the main function of voltage convertors in UART?

--- Content provided by FirstRanker.com ---

3. Why Zigbee based is preferred for wireless communication?
4. What is the IEEE standard for Zigbee protocol?
5. Write the two modes of communication are used in a ZigBee network.
6. What is the function of a scheduler?
7. Mention any two features of ?C/OS ? II.

--- Content provided by FirstRanker.com ---

8. Write the function for creating task in ?C/OS ? II.
9. Mention any two support devices for ?C/OS ? II.
10. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

52 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS


FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry

--- Content provided by FirstRanker.com ---

? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

--- Content provided by FirstRanker.com ---

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,

--- Content provided by FirstRanker.com ---

innovation and ethical practices
VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals

--- Content provided by FirstRanker.com ---

To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their

--- Content provided by FirstRanker.com ---

knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products

--- Content provided by FirstRanker.com ---

4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics

--- Content provided by FirstRanker.com ---

To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)

--- Content provided by FirstRanker.com ---

a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics

--- Content provided by FirstRanker.com ---

and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large

--- Content provided by FirstRanker.com ---

h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

--- Content provided by FirstRanker.com ---

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor

--- Content provided by FirstRanker.com ---

? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM

--- Content provided by FirstRanker.com ---

4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA

--- Content provided by FirstRanker.com ---

9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt

--- Content provided by FirstRanker.com ---

? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7

--- Content provided by FirstRanker.com ---

2
Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4

--- Content provided by FirstRanker.com ---

LED dimming using PWM 22
5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28

--- Content provided by FirstRanker.com ---

7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37

--- Content provided by FirstRanker.com ---

10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless

--- Content provided by FirstRanker.com ---

Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:

--- Content provided by FirstRanker.com ---

A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for

--- Content provided by FirstRanker.com ---

servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.

--- Content provided by FirstRanker.com ---

According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:

--- Content provided by FirstRanker.com ---

LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.

--- Content provided by FirstRanker.com ---

2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8

--- Content provided by FirstRanker.com ---

provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit

--- Content provided by FirstRanker.com ---

(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.

--- Content provided by FirstRanker.com ---

11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.

--- Content provided by FirstRanker.com ---

15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:

--- Content provided by FirstRanker.com ---

Pin configuration of LPC 2148.

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply

--- Content provided by FirstRanker.com ---

3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:

--- Content provided by FirstRanker.com ---

LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

--- Content provided by FirstRanker.com ---

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.

--- Content provided by FirstRanker.com ---

LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

--- Content provided by FirstRanker.com ---

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system

--- Content provided by FirstRanker.com ---

to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Recommended values are as shown in table:

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for

--- Content provided by FirstRanker.com ---

voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:

--- Content provided by FirstRanker.com ---

1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as

--- Content provided by FirstRanker.com ---

1. Smart phones
2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC

--- Content provided by FirstRanker.com ---

4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining

--- Content provided by FirstRanker.com ---

9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?

--- Content provided by FirstRanker.com ---

14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from

--- Content provided by FirstRanker.com ---

instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into

--- Content provided by FirstRanker.com ---

Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC

--- Content provided by FirstRanker.com ---

input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.

--- Content provided by FirstRanker.com ---

Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.

--- Content provided by FirstRanker.com ---

5. Used in DSP if input is analog


1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?

--- Content provided by FirstRanker.com ---

3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?

--- Content provided by FirstRanker.com ---

8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.

--- Content provided by FirstRanker.com ---

The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,

--- Content provided by FirstRanker.com ---

Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific

--- Content provided by FirstRanker.com ---

devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.

--- Content provided by FirstRanker.com ---

Circuit diagram:


Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:

--- Content provided by FirstRanker.com ---

Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems

--- Content provided by FirstRanker.com ---

5. Motor control



1. What are the features of LPC2148 DAC?

--- Content provided by FirstRanker.com ---

2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?

--- Content provided by FirstRanker.com ---

7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?

--- Content provided by FirstRanker.com ---

11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?

--- Content provided by FirstRanker.com ---

VIVA-VOCE

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by

--- Content provided by FirstRanker.com ---

dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period

--- Content provided by FirstRanker.com ---

A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The

--- Content provided by FirstRanker.com ---

anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:

--- Content provided by FirstRanker.com ---

Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?

--- Content provided by FirstRanker.com ---

3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?

--- Content provided by FirstRanker.com ---

8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?

--- Content provided by FirstRanker.com ---

13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.

--- Content provided by FirstRanker.com ---

18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :

--- Content provided by FirstRanker.com ---

1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?

--- Content provided by FirstRanker.com ---

4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?

--- Content provided by FirstRanker.com ---

9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?

--- Content provided by FirstRanker.com ---

14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the

--- Content provided by FirstRanker.com ---

pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.

--- Content provided by FirstRanker.com ---

So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.

--- Content provided by FirstRanker.com ---

Applications :
1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?

--- Content provided by FirstRanker.com ---

3. What are the functions of pull- up resistors?
4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?

--- Content provided by FirstRanker.com ---

8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.

--- Content provided by FirstRanker.com ---

12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?

--- Content provided by FirstRanker.com ---

17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored

--- Content provided by FirstRanker.com ---

messages inside EEPROM.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:
I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.

--- Content provided by FirstRanker.com ---

EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,

--- Content provided by FirstRanker.com ---

calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled

--- Content provided by FirstRanker.com ---

drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and

--- Content provided by FirstRanker.com ---

executed successfully and the memory content is verified on Win x talk terminal.
Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers

--- Content provided by FirstRanker.com ---

4. And also in embedded systems where program need not to be changed.


1. How does I2C protocol work?
2. What is EEPROM?

--- Content provided by FirstRanker.com ---

3. What is meant by master slave mode?
4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?

--- Content provided by FirstRanker.com ---

8. What are the registers used for enabling an interrupt?
9. What is PROM?
10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?

--- Content provided by FirstRanker.com ---

13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.

--- Content provided by FirstRanker.com ---

18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION

--- Content provided by FirstRanker.com ---

USING LPC2148
Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core

--- Content provided by FirstRanker.com ---

services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the

--- Content provided by FirstRanker.com ---

tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?

--- Content provided by FirstRanker.com ---

5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.

--- Content provided by FirstRanker.com ---

10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

--- Content provided by FirstRanker.com ---

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
External Interrupts:

--- Content provided by FirstRanker.com ---

An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the

--- Content provided by FirstRanker.com ---

external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:

--- Content provided by FirstRanker.com ---

Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts
Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering

--- Content provided by FirstRanker.com ---

3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?
3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?

--- Content provided by FirstRanker.com ---

6. What is interrupt pipelining?
7. What is pipeline shutdown?
8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?

--- Content provided by FirstRanker.com ---

11. What is PTM?
12. What is ITM?
13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:

--- Content provided by FirstRanker.com ---

LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.

--- Content provided by FirstRanker.com ---

The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00



Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:

--- Content provided by FirstRanker.com ---

Able to interface LED lights via the input output port and control them
Applications:
1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?

--- Content provided by FirstRanker.com ---

3. What is the function of GPIO?
4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?

--- Content provided by FirstRanker.com ---

8. How many numbers of LEDs present in Primer board?
9. Where LEDs are used?
10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?

--- Content provided by FirstRanker.com ---

13. What happens if the junction temperature of LED is increased?
14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 11 STEPPER MOTOR INTERFACE WITH
ARM -7 LPC2148
Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,

--- Content provided by FirstRanker.com ---

256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in
the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be

--- Content provided by FirstRanker.com ---

grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil
wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating

--- Content provided by FirstRanker.com ---

(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is
turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is

--- Content provided by FirstRanker.com ---

controlled in clockwise and anticlockwise direction.
Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
3. Used for precise positioning with a motor
4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

1. Define GPIO.
2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?

--- Content provided by FirstRanker.com ---

5. How stepper motor reacts for each pulse it receives?
6. What is serial communication?
7. What is parallel communication?
8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?

--- Content provided by FirstRanker.com ---

10. What are the advantages and disadvantages of parallel communication?
11. What does instruction-pipelining mean?
12. What is the power supply required for ARM processor?
13. What is a unit for torque?
14. What is RPM rating for a DC motor?

--- Content provided by FirstRanker.com ---

15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?
Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE

--- Content provided by FirstRanker.com ---

WITH ARM-7 LPC2148
Aim:
To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Temperature sensor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

Temperature Sensor:
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according

--- Content provided by FirstRanker.com ---

to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates
temperature. When the voltage increases then the temperature also rises. We can see this operation by
using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing temperature sensor with ARM controller is written and executed and
the temperature reading is seen on the monitor.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface different sensors with in-built ADC of the ARM processor and access the data
produced from them
Applications:
1. Used in Ovens, refrigerators

--- Content provided by FirstRanker.com ---

2. In HVAC environmental control
3. coolant or cylinder head temperatures
4. in the automotive industry to monitor air intake

--- Content provided by FirstRanker.com ---

1. What is LM35?
2. Define ISP.
3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?
4. What is the main function of analog pin in LPC 2148?

--- Content provided by FirstRanker.com ---

5. What is the output voltage produced by LM35 for one degree temperature?
6. What is the difference between LM 34 and LM 35 sensors?
7. How many pins are available in LM35?
8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?
9. What is operating the operating temperature range in LM35?

--- Content provided by FirstRanker.com ---

10. Why LM35 is used to Measure Temperature?
11. List the devices used to sense temperature.
12. What is the purpose of a thermocouple?
13. What is the output voltage of a thermocouple?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 13 IMPLEMENTATION OF WIRELESS

--- Content provided by FirstRanker.com ---

COMMUNICATION PROTOCOL
USING ZIGBEE WIRELESS MODULE
Aim:
To implement wireless communication protocol using zigbee wireless module with the help of ARM
processor

--- Content provided by FirstRanker.com ---

Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. Zigbee module

--- Content provided by FirstRanker.com ---

5. PC
Theory:
ZigBee is a specification to suite high level communication protocols using small, low-power digital
radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless
protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area

--- Content provided by FirstRanker.com ---

Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and
receiver modules which can do point to point communication. The Xbee is the brand name a wireless
transceiver device introduced by the Digi international which works on the ZigBee protocol and can form
PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific
fields, medical fields etc

--- Content provided by FirstRanker.com ---

Digi ZigBee:
The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.
The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to
transmit/receive or a framed mode providing advanced features. These modules can communicate point to
point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the wireless communication protocol using Zigbee wireless module is implemented using
LPC2148.
Outcome:
Able to form a wireless network using zigbee module and ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

51 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in traffic lights in non-urban areas

--- Content provided by FirstRanker.com ---

2. Used in building control systems
3. Used in asset tracking
4. Used in parking sensors

--- Content provided by FirstRanker.com ---

1. How many UART ports available in LPC2148?
2. What is the main function of voltage convertors in UART?
3. Why Zigbee based is preferred for wireless communication?

--- Content provided by FirstRanker.com ---

4. What is the IEEE standard for Zigbee protocol?
5. Write the two modes of communication are used in a ZigBee network.
6. What is the function of a scheduler?
7. Mention any two features of ?C/OS ? II.
8. Write the function for creating task in ?C/OS ? II.

--- Content provided by FirstRanker.com ---

9. Mention any two support devices for ?C/OS ? II.
10. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

52 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS



53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 14 BUZZER INTERFACE WITH ARM-7 LPC2148
Aim:
To write a program for buzzer interface with ARM processor and control its operation.

--- Content provided by FirstRanker.com ---

Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:

--- Content provided by FirstRanker.com ---

Buzzer is an electronic device commonly used to produce sound. Light weight, simple construction and
low price make it usable in various applications like car/truck reversing indicator, computers, call bells etc.
Piezo buzzer is based on the inverse principle of piezo electricity discovered in 1880 by Jacques and Pierre
Curie. It is the phenomena of generating electricity when mechanical pressure is applied to certain
materials and the vice versa is also true. Such materials are called piezo electric materials. Piezo electric

--- Content provided by FirstRanker.com ---

materials are either naturally available or manmade. Piezo ceramic is class of manmade material, which
poses piezo electric effect and is widely used to make disc, the heart of piezo buzzer. When subjected to
an alternating electric field they stretch or compress, in accordance with the frequency of the signal thereby
producing sound.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.

--- Content provided by FirstRanker.com ---

2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones

--- Content provided by FirstRanker.com ---

2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?

--- Content provided by FirstRanker.com ---

5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?

--- Content provided by FirstRanker.com ---

10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?

--- Content provided by FirstRanker.com ---

15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the

--- Content provided by FirstRanker.com ---

computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.

--- Content provided by FirstRanker.com ---

The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function

--- Content provided by FirstRanker.com ---

Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and

--- Content provided by FirstRanker.com ---

executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:

--- Content provided by FirstRanker.com ---

1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?

--- Content provided by FirstRanker.com ---

4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?

--- Content provided by FirstRanker.com ---

9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE

--- Content provided by FirstRanker.com ---

WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter

--- Content provided by FirstRanker.com ---

(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,

--- Content provided by FirstRanker.com ---

Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores

--- Content provided by FirstRanker.com ---

the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :

--- Content provided by FirstRanker.com ---

1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?

--- Content provided by FirstRanker.com ---

3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-

--- Content provided by FirstRanker.com ---

weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?

--- Content provided by FirstRanker.com ---

12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along

--- Content provided by FirstRanker.com ---

with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches

--- Content provided by FirstRanker.com ---

connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of

--- Content provided by FirstRanker.com ---

LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?

--- Content provided by FirstRanker.com ---

4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?

--- Content provided by FirstRanker.com ---

9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?

--- Content provided by FirstRanker.com ---

14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?

--- Content provided by FirstRanker.com ---

19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK

--- Content provided by FirstRanker.com ---

AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the

--- Content provided by FirstRanker.com ---

date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers

--- Content provided by FirstRanker.com ---

2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?

--- Content provided by FirstRanker.com ---

5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?

--- Content provided by FirstRanker.com ---

10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?

--- Content provided by FirstRanker.com ---

15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not

--- Content provided by FirstRanker.com ---

connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :

--- Content provided by FirstRanker.com ---

1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?

--- Content provided by FirstRanker.com ---

4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?

--- Content provided by FirstRanker.com ---

9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?

--- Content provided by FirstRanker.com ---

18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:

--- Content provided by FirstRanker.com ---

EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration

--- Content provided by FirstRanker.com ---

Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial

--- Content provided by FirstRanker.com ---

EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?

--- Content provided by FirstRanker.com ---

4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?

--- Content provided by FirstRanker.com ---

9. What is PROM?
10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?

--- Content provided by FirstRanker.com ---

14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?

--- Content provided by FirstRanker.com ---

19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this

--- Content provided by FirstRanker.com ---

message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.

--- Content provided by FirstRanker.com ---

The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?

--- Content provided by FirstRanker.com ---

6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.

--- Content provided by FirstRanker.com ---

11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:

--- Content provided by FirstRanker.com ---

To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or

--- Content provided by FirstRanker.com ---

monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and

--- Content provided by FirstRanker.com ---

programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:

--- Content provided by FirstRanker.com ---

Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with

--- Content provided by FirstRanker.com ---

interrrupts
Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging

--- Content provided by FirstRanker.com ---

4. In bioinformatics and voice recognition



1. When is an Interrupt Request received?

--- Content provided by FirstRanker.com ---

2. What is ISR?
3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?

--- Content provided by FirstRanker.com ---

7. What is pipeline shutdown?
8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?

--- Content provided by FirstRanker.com ---

12. What is ITM?
13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital

--- Content provided by FirstRanker.com ---

states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?

--- Content provided by FirstRanker.com ---

P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface LED lights via the input output port and control them

--- Content provided by FirstRanker.com ---

Applications:
1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?

--- Content provided by FirstRanker.com ---

4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?

--- Content provided by FirstRanker.com ---

9. Where LEDs are used?
10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?

--- Content provided by FirstRanker.com ---

14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 11 STEPPER MOTOR INTERFACE WITH

--- Content provided by FirstRanker.com ---

ARM -7 LPC2148
Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in

--- Content provided by FirstRanker.com ---

the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil

--- Content provided by FirstRanker.com ---

wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is

--- Content provided by FirstRanker.com ---

turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications:

--- Content provided by FirstRanker.com ---

3. Used for precise positioning with a motor
4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

1. Define GPIO.
2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?

--- Content provided by FirstRanker.com ---

6. What is serial communication?
7. What is parallel communication?
8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?

--- Content provided by FirstRanker.com ---

11. What does instruction-pipelining mean?
12. What is the power supply required for ARM processor?
13. What is a unit for torque?
14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Temperature sensor
3. Interfacing cables
4. PC
Theory:
Temperature Sensor:

--- Content provided by FirstRanker.com ---

The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates

--- Content provided by FirstRanker.com ---

temperature. When the voltage increases then the temperature also rises. We can see this operation by
using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing temperature sensor with ARM controller is written and executed and
the temperature reading is seen on the monitor.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface different sensors with in-built ADC of the ARM processor and access the data
produced from them
Applications:
1. Used in Ovens, refrigerators
2. In HVAC environmental control

--- Content provided by FirstRanker.com ---

3. coolant or cylinder head temperatures
4. in the automotive industry to monitor air intake

--- Content provided by FirstRanker.com ---

1. What is LM35?
2. Define ISP.
3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?
4. What is the main function of analog pin in LPC 2148?
5. What is the output voltage produced by LM35 for one degree temperature?

--- Content provided by FirstRanker.com ---

6. What is the difference between LM 34 and LM 35 sensors?
7. How many pins are available in LM35?
8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?
9. What is operating the operating temperature range in LM35?
10. Why LM35 is used to Measure Temperature?

--- Content provided by FirstRanker.com ---

11. List the devices used to sense temperature.
12. What is the purpose of a thermocouple?
13. What is the output voltage of a thermocouple?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 13 IMPLEMENTATION OF WIRELESS
COMMUNICATION PROTOCOL

--- Content provided by FirstRanker.com ---

USING ZIGBEE WIRELESS MODULE
Aim:
To implement wireless communication protocol using zigbee wireless module with the help of ARM
processor
Apparatus required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. Zigbee module
5. PC

--- Content provided by FirstRanker.com ---

Theory:
ZigBee is a specification to suite high level communication protocols using small, low-power digital
radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless
protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area
Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and

--- Content provided by FirstRanker.com ---

receiver modules which can do point to point communication. The Xbee is the brand name a wireless
transceiver device introduced by the Digi international which works on the ZigBee protocol and can form
PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific
fields, medical fields etc
Digi ZigBee:

--- Content provided by FirstRanker.com ---

The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.
The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to
transmit/receive or a framed mode providing advanced features. These modules can communicate point to
point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the wireless communication protocol using Zigbee wireless module is implemented using

--- Content provided by FirstRanker.com ---

LPC2148.
Outcome:
Able to form a wireless network using zigbee module and ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

51 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in traffic lights in non-urban areas
2. Used in building control systems

--- Content provided by FirstRanker.com ---

3. Used in asset tracking
4. Used in parking sensors

--- Content provided by FirstRanker.com ---

1. How many UART ports available in LPC2148?
2. What is the main function of voltage convertors in UART?
3. Why Zigbee based is preferred for wireless communication?
4. What is the IEEE standard for Zigbee protocol?

--- Content provided by FirstRanker.com ---

5. Write the two modes of communication are used in a ZigBee network.
6. What is the function of a scheduler?
7. Mention any two features of ?C/OS ? II.
8. Write the function for creating task in ?C/OS ? II.
9. Mention any two support devices for ?C/OS ? II.

--- Content provided by FirstRanker.com ---

10. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

52 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS

--- Content provided by FirstRanker.com ---

53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 14 BUZZER INTERFACE WITH ARM-7 LPC2148
Aim:
To write a program for buzzer interface with ARM processor and control its operation.
Apparatus required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:
Buzzer is an electronic device commonly used to produce sound. Light weight, simple construction and

--- Content provided by FirstRanker.com ---

low price make it usable in various applications like car/truck reversing indicator, computers, call bells etc.
Piezo buzzer is based on the inverse principle of piezo electricity discovered in 1880 by Jacques and Pierre
Curie. It is the phenomena of generating electricity when mechanical pressure is applied to certain
materials and the vice versa is also true. Such materials are called piezo electric materials. Piezo electric
materials are either naturally available or manmade. Piezo ceramic is class of manmade material, which

--- Content provided by FirstRanker.com ---

poses piezo electric effect and is widely used to make disc, the heart of piezo buzzer. When subjected to
an alternating electric field they stretch or compress, in accordance with the frequency of the signal thereby
producing sound.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the program for interfacing buzzer with ARM processor is written and executed and output is
verified.
Outcome:
Able to interface devices such as buzzer, relay with ARM controller

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry

--- Content provided by FirstRanker.com ---

? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

--- Content provided by FirstRanker.com ---

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,

--- Content provided by FirstRanker.com ---

innovation and ethical practices
VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals

--- Content provided by FirstRanker.com ---

To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their

--- Content provided by FirstRanker.com ---

knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products

--- Content provided by FirstRanker.com ---

4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics

--- Content provided by FirstRanker.com ---

To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)

--- Content provided by FirstRanker.com ---

a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics

--- Content provided by FirstRanker.com ---

and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large

--- Content provided by FirstRanker.com ---

h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

--- Content provided by FirstRanker.com ---

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor

--- Content provided by FirstRanker.com ---

? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM

--- Content provided by FirstRanker.com ---

4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA

--- Content provided by FirstRanker.com ---

9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt

--- Content provided by FirstRanker.com ---

? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7

--- Content provided by FirstRanker.com ---

2
Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4

--- Content provided by FirstRanker.com ---

LED dimming using PWM 22
5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28

--- Content provided by FirstRanker.com ---

7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37

--- Content provided by FirstRanker.com ---

10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless

--- Content provided by FirstRanker.com ---

Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:

--- Content provided by FirstRanker.com ---

A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for

--- Content provided by FirstRanker.com ---

servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.

--- Content provided by FirstRanker.com ---

According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:

--- Content provided by FirstRanker.com ---

LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.

--- Content provided by FirstRanker.com ---

2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8

--- Content provided by FirstRanker.com ---

provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit

--- Content provided by FirstRanker.com ---

(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.

--- Content provided by FirstRanker.com ---

11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.

--- Content provided by FirstRanker.com ---

15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:

--- Content provided by FirstRanker.com ---

Pin configuration of LPC 2148.

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply

--- Content provided by FirstRanker.com ---

3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:

--- Content provided by FirstRanker.com ---

LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

--- Content provided by FirstRanker.com ---

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.

--- Content provided by FirstRanker.com ---

LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

--- Content provided by FirstRanker.com ---

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system

--- Content provided by FirstRanker.com ---

to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Recommended values are as shown in table:

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for

--- Content provided by FirstRanker.com ---

voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:

--- Content provided by FirstRanker.com ---

1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as

--- Content provided by FirstRanker.com ---

1. Smart phones
2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC

--- Content provided by FirstRanker.com ---

4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining

--- Content provided by FirstRanker.com ---

9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?

--- Content provided by FirstRanker.com ---

14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from

--- Content provided by FirstRanker.com ---

instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into

--- Content provided by FirstRanker.com ---

Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC

--- Content provided by FirstRanker.com ---

input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.

--- Content provided by FirstRanker.com ---

Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.

--- Content provided by FirstRanker.com ---

5. Used in DSP if input is analog


1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?

--- Content provided by FirstRanker.com ---

3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?

--- Content provided by FirstRanker.com ---

8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.

--- Content provided by FirstRanker.com ---

The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,

--- Content provided by FirstRanker.com ---

Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific

--- Content provided by FirstRanker.com ---

devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.

--- Content provided by FirstRanker.com ---

Circuit diagram:


Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:

--- Content provided by FirstRanker.com ---

Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems

--- Content provided by FirstRanker.com ---

5. Motor control



1. What are the features of LPC2148 DAC?

--- Content provided by FirstRanker.com ---

2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?

--- Content provided by FirstRanker.com ---

7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?

--- Content provided by FirstRanker.com ---

11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?

--- Content provided by FirstRanker.com ---

VIVA-VOCE

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by

--- Content provided by FirstRanker.com ---

dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period

--- Content provided by FirstRanker.com ---

A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The

--- Content provided by FirstRanker.com ---

anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:

--- Content provided by FirstRanker.com ---

Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?

--- Content provided by FirstRanker.com ---

3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?

--- Content provided by FirstRanker.com ---

8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?

--- Content provided by FirstRanker.com ---

13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.

--- Content provided by FirstRanker.com ---

18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :

--- Content provided by FirstRanker.com ---

1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?

--- Content provided by FirstRanker.com ---

4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?

--- Content provided by FirstRanker.com ---

9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?

--- Content provided by FirstRanker.com ---

14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the

--- Content provided by FirstRanker.com ---

pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.

--- Content provided by FirstRanker.com ---

So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.

--- Content provided by FirstRanker.com ---

Applications :
1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?

--- Content provided by FirstRanker.com ---

3. What are the functions of pull- up resistors?
4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?

--- Content provided by FirstRanker.com ---

8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.

--- Content provided by FirstRanker.com ---

12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?

--- Content provided by FirstRanker.com ---

17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored

--- Content provided by FirstRanker.com ---

messages inside EEPROM.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:
I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.

--- Content provided by FirstRanker.com ---

EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,

--- Content provided by FirstRanker.com ---

calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled

--- Content provided by FirstRanker.com ---

drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and

--- Content provided by FirstRanker.com ---

executed successfully and the memory content is verified on Win x talk terminal.
Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers

--- Content provided by FirstRanker.com ---

4. And also in embedded systems where program need not to be changed.


1. How does I2C protocol work?
2. What is EEPROM?

--- Content provided by FirstRanker.com ---

3. What is meant by master slave mode?
4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?

--- Content provided by FirstRanker.com ---

8. What are the registers used for enabling an interrupt?
9. What is PROM?
10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?

--- Content provided by FirstRanker.com ---

13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.

--- Content provided by FirstRanker.com ---

18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION

--- Content provided by FirstRanker.com ---

USING LPC2148
Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core

--- Content provided by FirstRanker.com ---

services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the

--- Content provided by FirstRanker.com ---

tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?

--- Content provided by FirstRanker.com ---

5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.

--- Content provided by FirstRanker.com ---

10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

--- Content provided by FirstRanker.com ---

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
External Interrupts:

--- Content provided by FirstRanker.com ---

An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the

--- Content provided by FirstRanker.com ---

external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:

--- Content provided by FirstRanker.com ---

Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts
Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering

--- Content provided by FirstRanker.com ---

3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?
3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?

--- Content provided by FirstRanker.com ---

6. What is interrupt pipelining?
7. What is pipeline shutdown?
8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?

--- Content provided by FirstRanker.com ---

11. What is PTM?
12. What is ITM?
13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:

--- Content provided by FirstRanker.com ---

LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.

--- Content provided by FirstRanker.com ---

The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00



Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:

--- Content provided by FirstRanker.com ---

Able to interface LED lights via the input output port and control them
Applications:
1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?

--- Content provided by FirstRanker.com ---

3. What is the function of GPIO?
4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?

--- Content provided by FirstRanker.com ---

8. How many numbers of LEDs present in Primer board?
9. Where LEDs are used?
10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?

--- Content provided by FirstRanker.com ---

13. What happens if the junction temperature of LED is increased?
14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 11 STEPPER MOTOR INTERFACE WITH
ARM -7 LPC2148
Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,

--- Content provided by FirstRanker.com ---

256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in
the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be

--- Content provided by FirstRanker.com ---

grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil
wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating

--- Content provided by FirstRanker.com ---

(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is
turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is

--- Content provided by FirstRanker.com ---

controlled in clockwise and anticlockwise direction.
Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
3. Used for precise positioning with a motor
4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

1. Define GPIO.
2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?

--- Content provided by FirstRanker.com ---

5. How stepper motor reacts for each pulse it receives?
6. What is serial communication?
7. What is parallel communication?
8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?

--- Content provided by FirstRanker.com ---

10. What are the advantages and disadvantages of parallel communication?
11. What does instruction-pipelining mean?
12. What is the power supply required for ARM processor?
13. What is a unit for torque?
14. What is RPM rating for a DC motor?

--- Content provided by FirstRanker.com ---

15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?
Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE

--- Content provided by FirstRanker.com ---

WITH ARM-7 LPC2148
Aim:
To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Temperature sensor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

Temperature Sensor:
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according

--- Content provided by FirstRanker.com ---

to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates
temperature. When the voltage increases then the temperature also rises. We can see this operation by
using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing temperature sensor with ARM controller is written and executed and
the temperature reading is seen on the monitor.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface different sensors with in-built ADC of the ARM processor and access the data
produced from them
Applications:
1. Used in Ovens, refrigerators

--- Content provided by FirstRanker.com ---

2. In HVAC environmental control
3. coolant or cylinder head temperatures
4. in the automotive industry to monitor air intake

--- Content provided by FirstRanker.com ---

1. What is LM35?
2. Define ISP.
3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?
4. What is the main function of analog pin in LPC 2148?

--- Content provided by FirstRanker.com ---

5. What is the output voltage produced by LM35 for one degree temperature?
6. What is the difference between LM 34 and LM 35 sensors?
7. How many pins are available in LM35?
8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?
9. What is operating the operating temperature range in LM35?

--- Content provided by FirstRanker.com ---

10. Why LM35 is used to Measure Temperature?
11. List the devices used to sense temperature.
12. What is the purpose of a thermocouple?
13. What is the output voltage of a thermocouple?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 13 IMPLEMENTATION OF WIRELESS

--- Content provided by FirstRanker.com ---

COMMUNICATION PROTOCOL
USING ZIGBEE WIRELESS MODULE
Aim:
To implement wireless communication protocol using zigbee wireless module with the help of ARM
processor

--- Content provided by FirstRanker.com ---

Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. Zigbee module

--- Content provided by FirstRanker.com ---

5. PC
Theory:
ZigBee is a specification to suite high level communication protocols using small, low-power digital
radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless
protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area

--- Content provided by FirstRanker.com ---

Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and
receiver modules which can do point to point communication. The Xbee is the brand name a wireless
transceiver device introduced by the Digi international which works on the ZigBee protocol and can form
PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific
fields, medical fields etc

--- Content provided by FirstRanker.com ---

Digi ZigBee:
The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.
The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to
transmit/receive or a framed mode providing advanced features. These modules can communicate point to
point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the wireless communication protocol using Zigbee wireless module is implemented using
LPC2148.
Outcome:
Able to form a wireless network using zigbee module and ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

51 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in traffic lights in non-urban areas

--- Content provided by FirstRanker.com ---

2. Used in building control systems
3. Used in asset tracking
4. Used in parking sensors

--- Content provided by FirstRanker.com ---

1. How many UART ports available in LPC2148?
2. What is the main function of voltage convertors in UART?
3. Why Zigbee based is preferred for wireless communication?

--- Content provided by FirstRanker.com ---

4. What is the IEEE standard for Zigbee protocol?
5. Write the two modes of communication are used in a ZigBee network.
6. What is the function of a scheduler?
7. Mention any two features of ?C/OS ? II.
8. Write the function for creating task in ?C/OS ? II.

--- Content provided by FirstRanker.com ---

9. Mention any two support devices for ?C/OS ? II.
10. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

52 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS



53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 14 BUZZER INTERFACE WITH ARM-7 LPC2148
Aim:
To write a program for buzzer interface with ARM processor and control its operation.

--- Content provided by FirstRanker.com ---

Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:

--- Content provided by FirstRanker.com ---

Buzzer is an electronic device commonly used to produce sound. Light weight, simple construction and
low price make it usable in various applications like car/truck reversing indicator, computers, call bells etc.
Piezo buzzer is based on the inverse principle of piezo electricity discovered in 1880 by Jacques and Pierre
Curie. It is the phenomena of generating electricity when mechanical pressure is applied to certain
materials and the vice versa is also true. Such materials are called piezo electric materials. Piezo electric

--- Content provided by FirstRanker.com ---

materials are either naturally available or manmade. Piezo ceramic is class of manmade material, which
poses piezo electric effect and is widely used to make disc, the heart of piezo buzzer. When subjected to
an alternating electric field they stretch or compress, in accordance with the frequency of the signal thereby
producing sound.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing buzzer with ARM processor is written and executed and output is
verified.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface devices such as buzzer, relay with ARM controller

--- Content provided by FirstRanker.com ---

55 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:

1. In alarm devices and timers

--- Content provided by FirstRanker.com ---

2. In confirmation of user input such as mouse click or keystroke
3. Alarming Circuits
4. Communication equipments
5. Automobile electronics
6. Portable equipments, due to its compact size

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

1. Define Buzzer.
2. Which pin in ARM can be used to modulate Buzzer?
3. What is the function Flash magic software?
4. How the Buzzer can be disconnected in LPC2148?
5. How the volume of sound will be changed in Buzzer?

--- Content provided by FirstRanker.com ---

6. What is a buzzer
7. What are the applications of buzzer?
8. How buzzer is used in embedded system?
9. What is race round condition?
10. What is digital signal controller?

--- Content provided by FirstRanker.com ---

11. What are the features of buzzer circuit?
12. What is a semaphore?
13. What is mutexes?
14. What is the role of segment register?
15. What is watch dog timer?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?



DEPARTMENT OF

--- Content provided by FirstRanker.com ---

ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul

--- Content provided by FirstRanker.com ---

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

--- Content provided by FirstRanker.com ---

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems

--- Content provided by FirstRanker.com ---

? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION
MISSION

--- Content provided by FirstRanker.com ---

MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)

--- Content provided by FirstRanker.com ---

1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence

--- Content provided by FirstRanker.com ---

To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which

--- Content provided by FirstRanker.com ---

enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context

--- Content provided by FirstRanker.com ---

5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability

--- Content provided by FirstRanker.com ---

c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities

--- Content provided by FirstRanker.com ---

g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning

--- Content provided by FirstRanker.com ---

k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

--- Content provided by FirstRanker.com ---

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems

--- Content provided by FirstRanker.com ---

? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC

--- Content provided by FirstRanker.com ---

3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox

--- Content provided by FirstRanker.com ---

8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system

--- Content provided by FirstRanker.com ---

? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1

--- Content provided by FirstRanker.com ---

Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19

--- Content provided by FirstRanker.com ---

4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25
6

--- Content provided by FirstRanker.com ---

Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35

--- Content provided by FirstRanker.com ---

9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13

--- Content provided by FirstRanker.com ---

Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54

--- Content provided by FirstRanker.com ---

15 Relay interface with ARM? 7 57



7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.

--- Content provided by FirstRanker.com ---

Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and

--- Content provided by FirstRanker.com ---

higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used

--- Content provided by FirstRanker.com ---

architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.

--- Content provided by FirstRanker.com ---

LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide

--- Content provided by FirstRanker.com ---

interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.

--- Content provided by FirstRanker.com ---

4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.

--- Content provided by FirstRanker.com ---

7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.

--- Content provided by FirstRanker.com ---

10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz

--- Content provided by FirstRanker.com ---

14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly

--- Content provided by FirstRanker.com ---

2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

--- Content provided by FirstRanker.com ---

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.

--- Content provided by FirstRanker.com ---

Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

--- Content provided by FirstRanker.com ---

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?
Reset Circuit:

--- Content provided by FirstRanker.com ---

Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Recommended values are as shown in table:

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial

--- Content provided by FirstRanker.com ---

communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.

--- Content provided by FirstRanker.com ---

Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

Applications:

--- Content provided by FirstRanker.com ---

ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers
4. Digital TV

--- Content provided by FirstRanker.com ---

5. Home Gateways


1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?

--- Content provided by FirstRanker.com ---

3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?

--- Content provided by FirstRanker.com ---

8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?

--- Content provided by FirstRanker.com ---

13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR

--- Content provided by FirstRanker.com ---

INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the

--- Content provided by FirstRanker.com ---

moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully

--- Content provided by FirstRanker.com ---

accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog

--- Content provided by FirstRanker.com ---

quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes

--- Content provided by FirstRanker.com ---

4. Used in music reproduction technology.
5. Used in DSP if input is analog


1. What are the ADC operating modes in LPC2148?

--- Content provided by FirstRanker.com ---

2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?

--- Content provided by FirstRanker.com ---

7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?

--- Content provided by FirstRanker.com ---

12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip

--- Content provided by FirstRanker.com ---

DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to

--- Content provided by FirstRanker.com ---

implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.

--- Content provided by FirstRanker.com ---

Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave

--- Content provided by FirstRanker.com ---

Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by

--- Content provided by FirstRanker.com ---

using these four lines.
Circuit diagram:


Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.

--- Content provided by FirstRanker.com ---

Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics

--- Content provided by FirstRanker.com ---

4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?

--- Content provided by FirstRanker.com ---

6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?

--- Content provided by FirstRanker.com ---

10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?

--- Content provided by FirstRanker.com ---

15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning

--- Content provided by FirstRanker.com ---

2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.

--- Content provided by FirstRanker.com ---

The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.

--- Content provided by FirstRanker.com ---

Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects

--- Content provided by FirstRanker.com ---

3. In Narrow band sensors



1. What factors determine the LED dimming performance?

--- Content provided by FirstRanker.com ---

2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?

--- Content provided by FirstRanker.com ---

7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?

--- Content provided by FirstRanker.com ---

12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?

--- Content provided by FirstRanker.com ---

17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM

--- Content provided by FirstRanker.com ---

controller
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to

--- Content provided by FirstRanker.com ---

save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time

--- Content provided by FirstRanker.com ---

Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?

--- Content provided by FirstRanker.com ---

3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC

--- Content provided by FirstRanker.com ---

8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?

--- Content provided by FirstRanker.com ---

13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A

--- Content provided by FirstRanker.com ---

4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit Diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key

--- Content provided by FirstRanker.com ---

pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:

--- Content provided by FirstRanker.com ---

Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games

--- Content provided by FirstRanker.com ---

4. Used in portable video games and cell phones



1. What is Matrix keypad?

--- Content provided by FirstRanker.com ---

2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?

--- Content provided by FirstRanker.com ---

7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.

--- Content provided by FirstRanker.com ---

11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?

--- Content provided by FirstRanker.com ---

16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:

--- Content provided by FirstRanker.com ---

To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:
I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication

--- Content provided by FirstRanker.com ---

with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other

--- Content provided by FirstRanker.com ---

electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is

--- Content provided by FirstRanker.com ---

used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices

--- Content provided by FirstRanker.com ---

3. In laser printers
4. And also in embedded systems where program need not to be changed.


1. How does I2C protocol work?

--- Content provided by FirstRanker.com ---

2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?

--- Content provided by FirstRanker.com ---

7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?
10. What is EPROM?
11. What is mask ROM?

--- Content provided by FirstRanker.com ---

12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?

--- Content provided by FirstRanker.com ---

17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also

--- Content provided by FirstRanker.com ---

known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is

--- Content provided by FirstRanker.com ---

the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58

--- Content provided by FirstRanker.com ---

To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time

--- Content provided by FirstRanker.com ---

systems

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?

--- Content provided by FirstRanker.com ---

4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.

--- Content provided by FirstRanker.com ---

9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

--- Content provided by FirstRanker.com ---

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be

--- Content provided by FirstRanker.com ---

displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00



Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.

--- Content provided by FirstRanker.com ---

Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts
Applications:
1. Used in random logic and SPLDs

--- Content provided by FirstRanker.com ---

2. Used in cryptography and filtering
3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?
3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?

--- Content provided by FirstRanker.com ---

5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?
7. What is pipeline shutdown?
8. What is branch prediction?
9. What is the use of Neon Floating point engine?

--- Content provided by FirstRanker.com ---

10. What is the use of ?vectorize option?
11. What is PTM?
12. What is ITM?
13. What is ETM?
14. What is I2S interface?

--- Content provided by FirstRanker.com ---

15. What is the use of ?SWI? in ARM assembly?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 10 FLASHING OF LEDS
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of

--- Content provided by FirstRanker.com ---

microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface LED lights via the input output port and control them
Applications:
1. In Illumination
2. As status indicators in equipments

--- Content provided by FirstRanker.com ---

3. Stadium displays and dynamic decorative displays



1. What is seven segment displays?

--- Content provided by FirstRanker.com ---

2. What are the different configurations of LED?
3. What is the function of GPIO?
4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.

--- Content provided by FirstRanker.com ---

7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?
9. Where LEDs are used?
10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?

--- Content provided by FirstRanker.com ---

12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?
14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 11 STEPPER MOTOR INTERFACE WITH
ARM -7 LPC2148
Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor

--- Content provided by FirstRanker.com ---

in either directions.
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing

--- Content provided by FirstRanker.com ---

a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in
the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.

--- Content provided by FirstRanker.com ---

The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil
wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated

--- Content provided by FirstRanker.com ---

torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is
turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.
Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
3. Used for precise positioning with a motor
4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

1. Define GPIO.
2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?

--- Content provided by FirstRanker.com ---

4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?
6. What is serial communication?
7. What is parallel communication?
8. What is stepper motor & why it is named so?

--- Content provided by FirstRanker.com ---

9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?
11. What does instruction-pipelining mean?
12. What is the power supply required for ARM processor?
13. What is a unit for torque?

--- Content provided by FirstRanker.com ---

14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?
Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148
Aim:
To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Temperature sensor
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
Temperature Sensor:
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required

--- Content provided by FirstRanker.com ---

Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates
temperature. When the voltage increases then the temperature also rises. We can see this operation by
using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing temperature sensor with ARM controller is written and executed and

--- Content provided by FirstRanker.com ---

the temperature reading is seen on the monitor.
Outcome:
Able to interface different sensors with in-built ADC of the ARM processor and access the data
produced from them
Applications:

--- Content provided by FirstRanker.com ---

1. Used in Ovens, refrigerators
2. In HVAC environmental control
3. coolant or cylinder head temperatures
4. in the automotive industry to monitor air intake

--- Content provided by FirstRanker.com ---

1. What is LM35?
2. Define ISP.
3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?

--- Content provided by FirstRanker.com ---

4. What is the main function of analog pin in LPC 2148?
5. What is the output voltage produced by LM35 for one degree temperature?
6. What is the difference between LM 34 and LM 35 sensors?
7. How many pins are available in LM35?
8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?

--- Content provided by FirstRanker.com ---

9. What is operating the operating temperature range in LM35?
10. Why LM35 is used to Measure Temperature?
11. List the devices used to sense temperature.
12. What is the purpose of a thermocouple?
13. What is the output voltage of a thermocouple?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 13 IMPLEMENTATION OF WIRELESS
COMMUNICATION PROTOCOL
USING ZIGBEE WIRELESS MODULE
Aim:
To implement wireless communication protocol using zigbee wireless module with the help of ARM

--- Content provided by FirstRanker.com ---

processor
Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. Zigbee module
5. PC
Theory:
ZigBee is a specification to suite high level communication protocols using small, low-power digital
radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless

--- Content provided by FirstRanker.com ---

protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area
Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and
receiver modules which can do point to point communication. The Xbee is the brand name a wireless
transceiver device introduced by the Digi international which works on the ZigBee protocol and can form
PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific

--- Content provided by FirstRanker.com ---

fields, medical fields etc
Digi ZigBee:
The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.
The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to
transmit/receive or a framed mode providing advanced features. These modules can communicate point to

--- Content provided by FirstRanker.com ---

point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the wireless communication protocol using Zigbee wireless module is implemented using
LPC2148.
Outcome:
Able to form a wireless network using zigbee module and ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

51 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. Used in traffic lights in non-urban areas
2. Used in building control systems
3. Used in asset tracking
4. Used in parking sensors

--- Content provided by FirstRanker.com ---

1. How many UART ports available in LPC2148?
2. What is the main function of voltage convertors in UART?

--- Content provided by FirstRanker.com ---

3. Why Zigbee based is preferred for wireless communication?
4. What is the IEEE standard for Zigbee protocol?
5. Write the two modes of communication are used in a ZigBee network.
6. What is the function of a scheduler?
7. Mention any two features of ?C/OS ? II.

--- Content provided by FirstRanker.com ---

8. Write the function for creating task in ?C/OS ? II.
9. Mention any two support devices for ?C/OS ? II.
10. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

52 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS

--- Content provided by FirstRanker.com ---

53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 14 BUZZER INTERFACE WITH ARM-7 LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To write a program for buzzer interface with ARM processor and control its operation.
Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

Theory:
Buzzer is an electronic device commonly used to produce sound. Light weight, simple construction and
low price make it usable in various applications like car/truck reversing indicator, computers, call bells etc.
Piezo buzzer is based on the inverse principle of piezo electricity discovered in 1880 by Jacques and Pierre
Curie. It is the phenomena of generating electricity when mechanical pressure is applied to certain

--- Content provided by FirstRanker.com ---

materials and the vice versa is also true. Such materials are called piezo electric materials. Piezo electric
materials are either naturally available or manmade. Piezo ceramic is class of manmade material, which
poses piezo electric effect and is widely used to make disc, the heart of piezo buzzer. When subjected to
an alternating electric field they stretch or compress, in accordance with the frequency of the signal thereby
producing sound.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing buzzer with ARM processor is written and executed and output is
verified.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface devices such as buzzer, relay with ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

55 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications:

--- Content provided by FirstRanker.com ---

1. In alarm devices and timers
2. In confirmation of user input such as mouse click or keystroke
3. Alarming Circuits
4. Communication equipments
5. Automobile electronics

--- Content provided by FirstRanker.com ---

6. Portable equipments, due to its compact size

--- Content provided by FirstRanker.com ---

1. Define Buzzer.
2. Which pin in ARM can be used to modulate Buzzer?
3. What is the function Flash magic software?
4. How the Buzzer can be disconnected in LPC2148?

--- Content provided by FirstRanker.com ---

5. How the volume of sound will be changed in Buzzer?
6. What is a buzzer
7. What are the applications of buzzer?
8. How buzzer is used in embedded system?
9. What is race round condition?

--- Content provided by FirstRanker.com ---

10. What is digital signal controller?
11. What are the features of buzzer circuit?
12. What is a semaphore?
13. What is mutexes?
14. What is the role of segment register?

--- Content provided by FirstRanker.com ---

15. What is watch dog timer?

Viva-voce

--- Content provided by FirstRanker.com ---

56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 15 RELAY INTERFACE WITH ARM - 7
Aim:
To write a program to interface 2 relays with LPC 2148 ARM Controller and verify its working.
Apparatus required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
Theory:
A relay is an electrically operated switch. Many relays use an electromagnet to mechanically operate a
switch, but other operating principles are also used, such as solid-state relays. Relays are used where it is

--- Content provided by FirstRanker.com ---

necessary to control a circuit by a low-power signal (with complete electrical isolation between control and
controlled circuits), or where several circuits must be controlled by one signal. The first relays were used in
long distance telegraph circuits as amplifiers: they repeated the signal coming in from one circuit and re-
transmitted it on another circuit. Relays were used extensively in telephone exchanges and early
computers to perform logical operations.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________

--- Content provided by FirstRanker.com ---

Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and

--- Content provided by FirstRanker.com ---

training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels

--- Content provided by FirstRanker.com ---

? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to

--- Content provided by FirstRanker.com ---

shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry

--- Content provided by FirstRanker.com ---

? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION

--- Content provided by FirstRanker.com ---

VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge

--- Content provided by FirstRanker.com ---

to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions

--- Content provided by FirstRanker.com ---

3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in

--- Content provided by FirstRanker.com ---

the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field

--- Content provided by FirstRanker.com ---

b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems

--- Content provided by FirstRanker.com ---

e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility

--- Content provided by FirstRanker.com ---

i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems

--- Content provided by FirstRanker.com ---

? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:

--- Content provided by FirstRanker.com ---

1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD

--- Content provided by FirstRanker.com ---

6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor

--- Content provided by FirstRanker.com ---

11. Implementing zigbee protocol with ARM



? Write programs in ARM for a specific Application

--- Content provided by FirstRanker.com ---

? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system

--- Content provided by FirstRanker.com ---

COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.

--- Content provided by FirstRanker.com ---

CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16

--- Content provided by FirstRanker.com ---

3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5

--- Content provided by FirstRanker.com ---

Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31

--- Content provided by FirstRanker.com ---

CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43

--- Content provided by FirstRanker.com ---

12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:

--- Content provided by FirstRanker.com ---

To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These

--- Content provided by FirstRanker.com ---

are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power

--- Content provided by FirstRanker.com ---

consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital

--- Content provided by FirstRanker.com ---

televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high

--- Content provided by FirstRanker.com ---

end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.

--- Content provided by FirstRanker.com ---

3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with

--- Content provided by FirstRanker.com ---

conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.

--- Content provided by FirstRanker.com ---

9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.

--- Content provided by FirstRanker.com ---

13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.

--- Content provided by FirstRanker.com ---

16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit

--- Content provided by FirstRanker.com ---

5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted

--- Content provided by FirstRanker.com ---

into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.

--- Content provided by FirstRanker.com ---

Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and

--- Content provided by FirstRanker.com ---

its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:

--- Content provided by FirstRanker.com ---

ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books

--- Content provided by FirstRanker.com ---

3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?

--- Content provided by FirstRanker.com ---

6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?

--- Content provided by FirstRanker.com ---

11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?

--- Content provided by FirstRanker.com ---

16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and

--- Content provided by FirstRanker.com ---

convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is

--- Content provided by FirstRanker.com ---

the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the

--- Content provided by FirstRanker.com ---

A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins

--- Content provided by FirstRanker.com ---

as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.

--- Content provided by FirstRanker.com ---

2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?

--- Content provided by FirstRanker.com ---

5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?

--- Content provided by FirstRanker.com ---

10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or

--- Content provided by FirstRanker.com ---

voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for

--- Content provided by FirstRanker.com ---

industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,

--- Content provided by FirstRanker.com ---

Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and

--- Content provided by FirstRanker.com ---

out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.

--- Content provided by FirstRanker.com ---

2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?

--- Content provided by FirstRanker.com ---

4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?

--- Content provided by FirstRanker.com ---

8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?

--- Content provided by FirstRanker.com ---

13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6

--- Content provided by FirstRanker.com ---

(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED

--- Content provided by FirstRanker.com ---

will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :

--- Content provided by FirstRanker.com ---

1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED

--- Content provided by FirstRanker.com ---

5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?

--- Content provided by FirstRanker.com ---

10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?

--- Content provided by FirstRanker.com ---

15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?

--- Content provided by FirstRanker.com ---

20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt

--- Content provided by FirstRanker.com ---

service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?

--- Content provided by FirstRanker.com ---

6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.

--- Content provided by FirstRanker.com ---

11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection

--- Content provided by FirstRanker.com ---

between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system

--- Content provided by FirstRanker.com ---

2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?

--- Content provided by FirstRanker.com ---

5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?

--- Content provided by FirstRanker.com ---

10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?

--- Content provided by FirstRanker.com ---

19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):

--- Content provided by FirstRanker.com ---

The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only

--- Content provided by FirstRanker.com ---

memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based

--- Content provided by FirstRanker.com ---

EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &

--- Content provided by FirstRanker.com ---

SCL I2C lines.



32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?

--- Content provided by FirstRanker.com ---

5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?

--- Content provided by FirstRanker.com ---

10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?

--- Content provided by FirstRanker.com ---

15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?

--- Content provided by FirstRanker.com ---

20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that

--- Content provided by FirstRanker.com ---

the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.

--- Content provided by FirstRanker.com ---

Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in Acorn RISC PC700

--- Content provided by FirstRanker.com ---

2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player


1. What is IPC?

--- Content provided by FirstRanker.com ---

2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt

--- Content provided by FirstRanker.com ---

7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and

--- Content provided by FirstRanker.com ---

FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.

--- Content provided by FirstRanker.com ---

Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7

--- Content provided by FirstRanker.com ---

LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM

--- Content provided by FirstRanker.com ---

counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts

--- Content provided by FirstRanker.com ---

Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?

--- Content provided by FirstRanker.com ---

3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?
7. What is pipeline shutdown?

--- Content provided by FirstRanker.com ---

8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?
12. What is ITM?

--- Content provided by FirstRanker.com ---

13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse

--- Content provided by FirstRanker.com ---

click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface LED lights via the input output port and control them
Applications:

--- Content provided by FirstRanker.com ---

1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?
4. What are the Pins which are used to connect LEDs?

--- Content provided by FirstRanker.com ---

5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?
9. Where LEDs are used?

--- Content provided by FirstRanker.com ---

10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?
14. What is an anti collision rate light?

--- Content provided by FirstRanker.com ---

15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 11 STEPPER MOTOR INTERFACE WITH
ARM -7 LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).

--- Content provided by FirstRanker.com ---

Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in
the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage

--- Content provided by FirstRanker.com ---

only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil
wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using

--- Content provided by FirstRanker.com ---

soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is
turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way

--- Content provided by FirstRanker.com ---

to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.



44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications:
3. Used for precise positioning with a motor

--- Content provided by FirstRanker.com ---

4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

1. Define GPIO.

--- Content provided by FirstRanker.com ---

2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?
6. What is serial communication?

--- Content provided by FirstRanker.com ---

7. What is parallel communication?
8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?
11. What does instruction-pipelining mean?

--- Content provided by FirstRanker.com ---

12. What is the power supply required for ARM processor?
13. What is a unit for torque?
14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?
Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.
Apparatus Required:
1. LPC2148 ARM development board
2. Temperature sensor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Temperature Sensor:
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly

--- Content provided by FirstRanker.com ---

proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates
temperature. When the voltage increases then the temperature also rises. We can see this operation by

--- Content provided by FirstRanker.com ---

using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the program for interfacing temperature sensor with ARM controller is written and executed and
the temperature reading is seen on the monitor.
Outcome:
Able to interface different sensors with in-built ADC of the ARM processor and access the data

--- Content provided by FirstRanker.com ---

produced from them
Applications:
1. Used in Ovens, refrigerators
2. In HVAC environmental control
3. coolant or cylinder head temperatures

--- Content provided by FirstRanker.com ---

4. in the automotive industry to monitor air intake



1. What is LM35?

--- Content provided by FirstRanker.com ---

2. Define ISP.
3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?
4. What is the main function of analog pin in LPC 2148?
5. What is the output voltage produced by LM35 for one degree temperature?
6. What is the difference between LM 34 and LM 35 sensors?

--- Content provided by FirstRanker.com ---

7. How many pins are available in LM35?
8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?
9. What is operating the operating temperature range in LM35?
10. Why LM35 is used to Measure Temperature?
11. List the devices used to sense temperature.

--- Content provided by FirstRanker.com ---

12. What is the purpose of a thermocouple?
13. What is the output voltage of a thermocouple?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 13 IMPLEMENTATION OF WIRELESS
COMMUNICATION PROTOCOL
USING ZIGBEE WIRELESS MODULE

--- Content provided by FirstRanker.com ---

Aim:
To implement wireless communication protocol using zigbee wireless module with the help of ARM
processor
Apparatus required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. Zigbee module
5. PC
Theory:

--- Content provided by FirstRanker.com ---

ZigBee is a specification to suite high level communication protocols using small, low-power digital
radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless
protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area
Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and
receiver modules which can do point to point communication. The Xbee is the brand name a wireless

--- Content provided by FirstRanker.com ---

transceiver device introduced by the Digi international which works on the ZigBee protocol and can form
PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific
fields, medical fields etc
Digi ZigBee:
The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.

--- Content provided by FirstRanker.com ---

The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to
transmit/receive or a framed mode providing advanced features. These modules can communicate point to
point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:


Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the wireless communication protocol using Zigbee wireless module is implemented using
LPC2148.

--- Content provided by FirstRanker.com ---

Outcome:
Able to form a wireless network using zigbee module and ARM controller

--- Content provided by FirstRanker.com ---

51 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. Used in traffic lights in non-urban areas
2. Used in building control systems
3. Used in asset tracking

--- Content provided by FirstRanker.com ---

4. Used in parking sensors

--- Content provided by FirstRanker.com ---

1. How many UART ports available in LPC2148?
2. What is the main function of voltage convertors in UART?
3. Why Zigbee based is preferred for wireless communication?
4. What is the IEEE standard for Zigbee protocol?
5. Write the two modes of communication are used in a ZigBee network.

--- Content provided by FirstRanker.com ---

6. What is the function of a scheduler?
7. Mention any two features of ?C/OS ? II.
8. Write the function for creating task in ?C/OS ? II.
9. Mention any two support devices for ?C/OS ? II.
10. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

52 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS

--- Content provided by FirstRanker.com ---

53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 14 BUZZER INTERFACE WITH ARM-7 LPC2148
Aim:
To write a program for buzzer interface with ARM processor and control its operation.
Apparatus required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
Theory:
Buzzer is an electronic device commonly used to produce sound. Light weight, simple construction and
low price make it usable in various applications like car/truck reversing indicator, computers, call bells etc.

--- Content provided by FirstRanker.com ---

Piezo buzzer is based on the inverse principle of piezo electricity discovered in 1880 by Jacques and Pierre
Curie. It is the phenomena of generating electricity when mechanical pressure is applied to certain
materials and the vice versa is also true. Such materials are called piezo electric materials. Piezo electric
materials are either naturally available or manmade. Piezo ceramic is class of manmade material, which
poses piezo electric effect and is widely used to make disc, the heart of piezo buzzer. When subjected to

--- Content provided by FirstRanker.com ---

an alternating electric field they stretch or compress, in accordance with the frequency of the signal thereby
producing sound.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the program for interfacing buzzer with ARM processor is written and executed and output is
verified.
Outcome:
Able to interface devices such as buzzer, relay with ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

55 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:

1. In alarm devices and timers
2. In confirmation of user input such as mouse click or keystroke
3. Alarming Circuits

--- Content provided by FirstRanker.com ---

4. Communication equipments
5. Automobile electronics
6. Portable equipments, due to its compact size

--- Content provided by FirstRanker.com ---

1. Define Buzzer.
2. Which pin in ARM can be used to modulate Buzzer?

--- Content provided by FirstRanker.com ---

3. What is the function Flash magic software?
4. How the Buzzer can be disconnected in LPC2148?
5. How the volume of sound will be changed in Buzzer?
6. What is a buzzer
7. What are the applications of buzzer?

--- Content provided by FirstRanker.com ---

8. How buzzer is used in embedded system?
9. What is race round condition?
10. What is digital signal controller?
11. What are the features of buzzer circuit?
12. What is a semaphore?

--- Content provided by FirstRanker.com ---

13. What is mutexes?
14. What is the role of segment register?
15. What is watch dog timer?

Viva-voce

--- Content provided by FirstRanker.com ---

56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 15 RELAY INTERFACE WITH ARM - 7
Aim:
To write a program to interface 2 relays with LPC 2148 ARM Controller and verify its working.

--- Content provided by FirstRanker.com ---

Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:

--- Content provided by FirstRanker.com ---

A relay is an electrically operated switch. Many relays use an electromagnet to mechanically operate a
switch, but other operating principles are also used, such as solid-state relays. Relays are used where it is
necessary to control a circuit by a low-power signal (with complete electrical isolation between control and
controlled circuits), or where several circuits must be controlled by one signal. The first relays were used in
long distance telegraph circuits as amplifiers: they repeated the signal coming in from one circuit and re-

--- Content provided by FirstRanker.com ---

transmitted it on another circuit. Relays were used extensively in telephone exchanges and early
computers to perform logical operations.

--- Content provided by FirstRanker.com ---

57 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
57 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
The program for interfacing relays with ARM controller is done and its working is verified.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface devices such as relay with ARM controller and control them using programs.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________

--- Content provided by FirstRanker.com ---

LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on

--- Content provided by FirstRanker.com ---

heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the

--- Content provided by FirstRanker.com ---

challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on

--- Content provided by FirstRanker.com ---

advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION

--- Content provided by FirstRanker.com ---

MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education

--- Content provided by FirstRanker.com ---

2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth

--- Content provided by FirstRanker.com ---

To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering

--- Content provided by FirstRanker.com ---

issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic

--- Content provided by FirstRanker.com ---

constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks

--- Content provided by FirstRanker.com ---

f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities

--- Content provided by FirstRanker.com ---

j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface

--- Content provided by FirstRanker.com ---

? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system

--- Content provided by FirstRanker.com ---

2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt

--- Content provided by FirstRanker.com ---

7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations

--- Content provided by FirstRanker.com ---

? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES

--- Content provided by FirstRanker.com ---

COURSE OUTCOMES



6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3

--- Content provided by FirstRanker.com ---

Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25

--- Content provided by FirstRanker.com ---

6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS

--- Content provided by FirstRanker.com ---

8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47

--- Content provided by FirstRanker.com ---

13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS

--- Content provided by FirstRanker.com ---

14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components

--- Content provided by FirstRanker.com ---

required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad

--- Content provided by FirstRanker.com ---

computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been

--- Content provided by FirstRanker.com ---

produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set

--- Content provided by FirstRanker.com ---

architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:

--- Content provided by FirstRanker.com ---

1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real

--- Content provided by FirstRanker.com ---

Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.

--- Content provided by FirstRanker.com ---

6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with

--- Content provided by FirstRanker.com ---

buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with

--- Content provided by FirstRanker.com ---

an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or

--- Content provided by FirstRanker.com ---

Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:

--- Content provided by FirstRanker.com ---

1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator

--- Content provided by FirstRanker.com ---

6. UART



10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.

--- Content provided by FirstRanker.com ---

Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.

--- Content provided by FirstRanker.com ---

Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?

--- Content provided by FirstRanker.com ---

Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

UART:

--- Content provided by FirstRanker.com ---

LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup

--- Content provided by FirstRanker.com ---

required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers

--- Content provided by FirstRanker.com ---

4. Digital TV
5. Home Gateways


1. What are the basic units of ARM 7?

--- Content provided by FirstRanker.com ---

2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?

--- Content provided by FirstRanker.com ---

7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt

--- Content provided by FirstRanker.com ---

12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete

--- Content provided by FirstRanker.com ---

digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to

--- Content provided by FirstRanker.com ---

scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards

--- Content provided by FirstRanker.com ---

3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?

--- Content provided by FirstRanker.com ---

6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?

--- Content provided by FirstRanker.com ---

11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog

--- Content provided by FirstRanker.com ---

real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection

--- Content provided by FirstRanker.com ---

there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the

--- Content provided by FirstRanker.com ---

master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any

--- Content provided by FirstRanker.com ---

unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI

--- Content provided by FirstRanker.com ---

connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are

--- Content provided by FirstRanker.com ---

written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.
2. Video encoder

--- Content provided by FirstRanker.com ---

3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?

--- Content provided by FirstRanker.com ---

5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?

--- Content provided by FirstRanker.com ---

9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.

--- Content provided by FirstRanker.com ---

14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
LPC2148 supports 2 types of PWM:

--- Content provided by FirstRanker.com ---

1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x

--- Content provided by FirstRanker.com ---

MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and

--- Content provided by FirstRanker.com ---

output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :
1. In Visual signals to covey a message

--- Content provided by FirstRanker.com ---

2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?

--- Content provided by FirstRanker.com ---

6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?

--- Content provided by FirstRanker.com ---

11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?

--- Content provided by FirstRanker.com ---

16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never

--- Content provided by FirstRanker.com ---

resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?

--- Content provided by FirstRanker.com ---

2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?

--- Content provided by FirstRanker.com ---

7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.

--- Content provided by FirstRanker.com ---

12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and

--- Content provided by FirstRanker.com ---

columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are

--- Content provided by FirstRanker.com ---

connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit Diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system
2. Security system with user changeable

--- Content provided by FirstRanker.com ---

3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.

--- Content provided by FirstRanker.com ---

6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by

--- Content provided by FirstRanker.com ---

CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?

--- Content provided by FirstRanker.com ---

15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between

--- Content provided by FirstRanker.com ---

integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of

--- Content provided by FirstRanker.com ---

higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a

--- Content provided by FirstRanker.com ---

command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. ROM used in toys,automobiles to store data when power is off

--- Content provided by FirstRanker.com ---

2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?
5. What is an interrupt?

--- Content provided by FirstRanker.com ---

6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?
10. What is EPROM?

--- Content provided by FirstRanker.com ---

11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?
15. What is non maskable interrupt?

--- Content provided by FirstRanker.com ---

16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.

--- Content provided by FirstRanker.com ---

The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.
Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:

--- Content provided by FirstRanker.com ---

Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger

--- Content provided by FirstRanker.com ---

3. Used in Meizu M6 MINI player


1. What is IPC?
2. Define Queue.

--- Content provided by FirstRanker.com ---

3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt
7. What is branch prediction?

--- Content provided by FirstRanker.com ---

8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 9 INTERRUPT PERFORMANCE

--- Content provided by FirstRanker.com ---

CHARACTERISTICSOF ARM AND FPGA

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:

--- Content provided by FirstRanker.com ---

When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &

--- Content provided by FirstRanker.com ---

P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing

--- Content provided by FirstRanker.com ---

and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts
Applications:

--- Content provided by FirstRanker.com ---

1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?
3. How do you initialize interrupt?

--- Content provided by FirstRanker.com ---

4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?
7. What is pipeline shutdown?
8. What is branch prediction?

--- Content provided by FirstRanker.com ---

9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?
12. What is ITM?
13. What is ETM?

--- Content provided by FirstRanker.com ---

14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 10 FLASHING OF LEDS

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by

--- Content provided by FirstRanker.com ---

turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface LED lights via the input output port and control them
Applications:
1. In Illumination

--- Content provided by FirstRanker.com ---

2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?
4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?

--- Content provided by FirstRanker.com ---

6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?
9. Where LEDs are used?
10. What is the use of flash magic software?

--- Content provided by FirstRanker.com ---

11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?
14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 11 STEPPER MOTOR INTERFACE WITH
ARM -7 LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of

--- Content provided by FirstRanker.com ---

poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in
the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the

--- Content provided by FirstRanker.com ---

motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil
wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent

--- Content provided by FirstRanker.com ---

torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is
turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.
Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational

--- Content provided by FirstRanker.com ---

movements

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
3. Used for precise positioning with a motor
4. Used in hard disk drives, robotics

--- Content provided by FirstRanker.com ---

5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

1. Define GPIO.
2. What is the function of ULN2803?

--- Content provided by FirstRanker.com ---

3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?
6. What is serial communication?
7. What is parallel communication?

--- Content provided by FirstRanker.com ---

8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?
11. What does instruction-pipelining mean?
12. What is the power supply required for ARM processor?

--- Content provided by FirstRanker.com ---

13. What is a unit for torque?
14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?
Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148
Aim:
To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and

--- Content provided by FirstRanker.com ---

display the room temperature value on the screen.
Apparatus Required:
1. LPC2148 ARM development board
2. Temperature sensor
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Temperature Sensor:
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output

--- Content provided by FirstRanker.com ---

that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates
temperature. When the voltage increases then the temperature also rises. We can see this operation by
using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the program for interfacing temperature sensor with ARM controller is written and executed and
the temperature reading is seen on the monitor.
Outcome:
Able to interface different sensors with in-built ADC of the ARM processor and access the data
produced from them

--- Content provided by FirstRanker.com ---

Applications:
1. Used in Ovens, refrigerators
2. In HVAC environmental control
3. coolant or cylinder head temperatures
4. in the automotive industry to monitor air intake

--- Content provided by FirstRanker.com ---

1. What is LM35?
2. Define ISP.

--- Content provided by FirstRanker.com ---

3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?
4. What is the main function of analog pin in LPC 2148?
5. What is the output voltage produced by LM35 for one degree temperature?
6. What is the difference between LM 34 and LM 35 sensors?
7. How many pins are available in LM35?

--- Content provided by FirstRanker.com ---

8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?
9. What is operating the operating temperature range in LM35?
10. Why LM35 is used to Measure Temperature?
11. List the devices used to sense temperature.
12. What is the purpose of a thermocouple?

--- Content provided by FirstRanker.com ---

13. What is the output voltage of a thermocouple?
Viva-voce

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 13 IMPLEMENTATION OF WIRELESS
COMMUNICATION PROTOCOL
USING ZIGBEE WIRELESS MODULE
Aim:

--- Content provided by FirstRanker.com ---

To implement wireless communication protocol using zigbee wireless module with the help of ARM
processor
Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. Zigbee module
5. PC
Theory:
ZigBee is a specification to suite high level communication protocols using small, low-power digital

--- Content provided by FirstRanker.com ---

radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless
protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area
Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and
receiver modules which can do point to point communication. The Xbee is the brand name a wireless
transceiver device introduced by the Digi international which works on the ZigBee protocol and can form

--- Content provided by FirstRanker.com ---

PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific
fields, medical fields etc
Digi ZigBee:
The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.
The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to

--- Content provided by FirstRanker.com ---

transmit/receive or a framed mode providing advanced features. These modules can communicate point to
point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:


Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the wireless communication protocol using Zigbee wireless module is implemented using
LPC2148.
Outcome:

--- Content provided by FirstRanker.com ---

Able to form a wireless network using zigbee module and ARM controller

--- Content provided by FirstRanker.com ---

51 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. Used in traffic lights in non-urban areas
2. Used in building control systems
3. Used in asset tracking
4. Used in parking sensors

--- Content provided by FirstRanker.com ---

1. How many UART ports available in LPC2148?

--- Content provided by FirstRanker.com ---

2. What is the main function of voltage convertors in UART?
3. Why Zigbee based is preferred for wireless communication?
4. What is the IEEE standard for Zigbee protocol?
5. Write the two modes of communication are used in a ZigBee network.
6. What is the function of a scheduler?

--- Content provided by FirstRanker.com ---

7. Mention any two features of ?C/OS ? II.
8. Write the function for creating task in ?C/OS ? II.
9. Mention any two support devices for ?C/OS ? II.
10. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

52 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS

--- Content provided by FirstRanker.com ---

53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 14 BUZZER INTERFACE WITH ARM-7 LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To write a program for buzzer interface with ARM processor and control its operation.
Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
Theory:
Buzzer is an electronic device commonly used to produce sound. Light weight, simple construction and
low price make it usable in various applications like car/truck reversing indicator, computers, call bells etc.
Piezo buzzer is based on the inverse principle of piezo electricity discovered in 1880 by Jacques and Pierre

--- Content provided by FirstRanker.com ---

Curie. It is the phenomena of generating electricity when mechanical pressure is applied to certain
materials and the vice versa is also true. Such materials are called piezo electric materials. Piezo electric
materials are either naturally available or manmade. Piezo ceramic is class of manmade material, which
poses piezo electric effect and is widely used to make disc, the heart of piezo buzzer. When subjected to
an alternating electric field they stretch or compress, in accordance with the frequency of the signal thereby

--- Content provided by FirstRanker.com ---

producing sound.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing buzzer with ARM processor is written and executed and output is

--- Content provided by FirstRanker.com ---

verified.
Outcome:
Able to interface devices such as buzzer, relay with ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

55 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications:

--- Content provided by FirstRanker.com ---

1. In alarm devices and timers
2. In confirmation of user input such as mouse click or keystroke
3. Alarming Circuits
4. Communication equipments

--- Content provided by FirstRanker.com ---

5. Automobile electronics
6. Portable equipments, due to its compact size

--- Content provided by FirstRanker.com ---

1. Define Buzzer.
2. Which pin in ARM can be used to modulate Buzzer?
3. What is the function Flash magic software?

--- Content provided by FirstRanker.com ---

4. How the Buzzer can be disconnected in LPC2148?
5. How the volume of sound will be changed in Buzzer?
6. What is a buzzer
7. What are the applications of buzzer?
8. How buzzer is used in embedded system?

--- Content provided by FirstRanker.com ---

9. What is race round condition?
10. What is digital signal controller?
11. What are the features of buzzer circuit?
12. What is a semaphore?
13. What is mutexes?

--- Content provided by FirstRanker.com ---

14. What is the role of segment register?
15. What is watch dog timer?

Viva-voce

--- Content provided by FirstRanker.com ---

56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 15 RELAY INTERFACE WITH ARM - 7
Aim:
To write a program to interface 2 relays with LPC 2148 ARM Controller and verify its working.
Apparatus required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:
A relay is an electrically operated switch. Many relays use an electromagnet to mechanically operate a

--- Content provided by FirstRanker.com ---

switch, but other operating principles are also used, such as solid-state relays. Relays are used where it is
necessary to control a circuit by a low-power signal (with complete electrical isolation between control and
controlled circuits), or where several circuits must be controlled by one signal. The first relays were used in
long distance telegraph circuits as amplifiers: they repeated the signal coming in from one circuit and re-
transmitted it on another circuit. Relays were used extensively in telephone exchanges and early

--- Content provided by FirstRanker.com ---

computers to perform logical operations.



57 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

57 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
The program for interfacing relays with ARM controller is done and its working is verified.
Outcome:
Able to interface devices such as relay with ARM controller and control them using programs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

58 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. Used in homes, even in streets.
2. In automatic garage door for its movement and direction.
3. And even in refrigerators

--- Content provided by FirstRanker.com ---

4. In industries to provide energy on machineries.
5. In electrical fuel pump

--- Content provided by FirstRanker.com ---

1. What is the function of relay?
2. What is the function of Opto-isolator?
3. What is the function of power transistor in LPC2148?
4. Which pin acts as an output port for relay?
5. What is a relay circuit

--- Content provided by FirstRanker.com ---

6. what are the applications of relay circuit
7. what are the advantages of relay circuit
8. How does combination of functions reduce memory requirements in embedded systems?
9. What is the need for DMAC in ES?
10. Mention how I/O devices are classified for embedded system?

--- Content provided by FirstRanker.com ---

11. Explain what is interrupt latency? How can you reduce it?
12. What does DMA address will deal with?
13. List out various uses of timers in embedded system?
14. List out some of the commonly found errors in Embedded Systems?
15. What is the difference between macro and line function.

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________

--- Content provided by FirstRanker.com ---

Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and

--- Content provided by FirstRanker.com ---

training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels

--- Content provided by FirstRanker.com ---

? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to

--- Content provided by FirstRanker.com ---

shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry

--- Content provided by FirstRanker.com ---

? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION

--- Content provided by FirstRanker.com ---

VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge

--- Content provided by FirstRanker.com ---

to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions

--- Content provided by FirstRanker.com ---

3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in

--- Content provided by FirstRanker.com ---

the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field

--- Content provided by FirstRanker.com ---

b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems

--- Content provided by FirstRanker.com ---

e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility

--- Content provided by FirstRanker.com ---

i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems

--- Content provided by FirstRanker.com ---

? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:

--- Content provided by FirstRanker.com ---

1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD

--- Content provided by FirstRanker.com ---

6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor

--- Content provided by FirstRanker.com ---

11. Implementing zigbee protocol with ARM



? Write programs in ARM for a specific Application

--- Content provided by FirstRanker.com ---

? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system

--- Content provided by FirstRanker.com ---

COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.

--- Content provided by FirstRanker.com ---

CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16

--- Content provided by FirstRanker.com ---

3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5

--- Content provided by FirstRanker.com ---

Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31

--- Content provided by FirstRanker.com ---

CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43

--- Content provided by FirstRanker.com ---

12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:

--- Content provided by FirstRanker.com ---

To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These

--- Content provided by FirstRanker.com ---

are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power

--- Content provided by FirstRanker.com ---

consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital

--- Content provided by FirstRanker.com ---

televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high

--- Content provided by FirstRanker.com ---

end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.

--- Content provided by FirstRanker.com ---

3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with

--- Content provided by FirstRanker.com ---

conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.

--- Content provided by FirstRanker.com ---

9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.

--- Content provided by FirstRanker.com ---

13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.

--- Content provided by FirstRanker.com ---

16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit

--- Content provided by FirstRanker.com ---

5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted

--- Content provided by FirstRanker.com ---

into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.

--- Content provided by FirstRanker.com ---

Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and

--- Content provided by FirstRanker.com ---

its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:

--- Content provided by FirstRanker.com ---

ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books

--- Content provided by FirstRanker.com ---

3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?

--- Content provided by FirstRanker.com ---

6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?

--- Content provided by FirstRanker.com ---

11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?

--- Content provided by FirstRanker.com ---

16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and

--- Content provided by FirstRanker.com ---

convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is

--- Content provided by FirstRanker.com ---

the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the

--- Content provided by FirstRanker.com ---

A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins

--- Content provided by FirstRanker.com ---

as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.

--- Content provided by FirstRanker.com ---

2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?

--- Content provided by FirstRanker.com ---

5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?

--- Content provided by FirstRanker.com ---

10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or

--- Content provided by FirstRanker.com ---

voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for

--- Content provided by FirstRanker.com ---

industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,

--- Content provided by FirstRanker.com ---

Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and

--- Content provided by FirstRanker.com ---

out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.

--- Content provided by FirstRanker.com ---

2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?

--- Content provided by FirstRanker.com ---

4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?

--- Content provided by FirstRanker.com ---

8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?

--- Content provided by FirstRanker.com ---

13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6

--- Content provided by FirstRanker.com ---

(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED

--- Content provided by FirstRanker.com ---

will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :

--- Content provided by FirstRanker.com ---

1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED

--- Content provided by FirstRanker.com ---

5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?

--- Content provided by FirstRanker.com ---

10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?

--- Content provided by FirstRanker.com ---

15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?

--- Content provided by FirstRanker.com ---

20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt

--- Content provided by FirstRanker.com ---

service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?

--- Content provided by FirstRanker.com ---

6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.

--- Content provided by FirstRanker.com ---

11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection

--- Content provided by FirstRanker.com ---

between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system

--- Content provided by FirstRanker.com ---

2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?

--- Content provided by FirstRanker.com ---

5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?

--- Content provided by FirstRanker.com ---

10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?

--- Content provided by FirstRanker.com ---

19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):

--- Content provided by FirstRanker.com ---

The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only

--- Content provided by FirstRanker.com ---

memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based

--- Content provided by FirstRanker.com ---

EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &

--- Content provided by FirstRanker.com ---

SCL I2C lines.



32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?

--- Content provided by FirstRanker.com ---

5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?

--- Content provided by FirstRanker.com ---

10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?

--- Content provided by FirstRanker.com ---

15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?

--- Content provided by FirstRanker.com ---

20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that

--- Content provided by FirstRanker.com ---

the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.

--- Content provided by FirstRanker.com ---

Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in Acorn RISC PC700

--- Content provided by FirstRanker.com ---

2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player


1. What is IPC?

--- Content provided by FirstRanker.com ---

2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt

--- Content provided by FirstRanker.com ---

7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and

--- Content provided by FirstRanker.com ---

FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.

--- Content provided by FirstRanker.com ---

Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7

--- Content provided by FirstRanker.com ---

LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM

--- Content provided by FirstRanker.com ---

counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts

--- Content provided by FirstRanker.com ---

Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?

--- Content provided by FirstRanker.com ---

3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?
7. What is pipeline shutdown?

--- Content provided by FirstRanker.com ---

8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?
12. What is ITM?

--- Content provided by FirstRanker.com ---

13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse

--- Content provided by FirstRanker.com ---

click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface LED lights via the input output port and control them
Applications:

--- Content provided by FirstRanker.com ---

1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?
4. What are the Pins which are used to connect LEDs?

--- Content provided by FirstRanker.com ---

5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?
9. Where LEDs are used?

--- Content provided by FirstRanker.com ---

10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?
14. What is an anti collision rate light?

--- Content provided by FirstRanker.com ---

15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 11 STEPPER MOTOR INTERFACE WITH
ARM -7 LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).

--- Content provided by FirstRanker.com ---

Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in
the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage

--- Content provided by FirstRanker.com ---

only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil
wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using

--- Content provided by FirstRanker.com ---

soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is
turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way

--- Content provided by FirstRanker.com ---

to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.



44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications:
3. Used for precise positioning with a motor

--- Content provided by FirstRanker.com ---

4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

1. Define GPIO.

--- Content provided by FirstRanker.com ---

2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?
6. What is serial communication?

--- Content provided by FirstRanker.com ---

7. What is parallel communication?
8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?
11. What does instruction-pipelining mean?

--- Content provided by FirstRanker.com ---

12. What is the power supply required for ARM processor?
13. What is a unit for torque?
14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?
Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.
Apparatus Required:
1. LPC2148 ARM development board
2. Temperature sensor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Temperature Sensor:
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly

--- Content provided by FirstRanker.com ---

proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates
temperature. When the voltage increases then the temperature also rises. We can see this operation by

--- Content provided by FirstRanker.com ---

using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the program for interfacing temperature sensor with ARM controller is written and executed and
the temperature reading is seen on the monitor.
Outcome:
Able to interface different sensors with in-built ADC of the ARM processor and access the data

--- Content provided by FirstRanker.com ---

produced from them
Applications:
1. Used in Ovens, refrigerators
2. In HVAC environmental control
3. coolant or cylinder head temperatures

--- Content provided by FirstRanker.com ---

4. in the automotive industry to monitor air intake



1. What is LM35?

--- Content provided by FirstRanker.com ---

2. Define ISP.
3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?
4. What is the main function of analog pin in LPC 2148?
5. What is the output voltage produced by LM35 for one degree temperature?
6. What is the difference between LM 34 and LM 35 sensors?

--- Content provided by FirstRanker.com ---

7. How many pins are available in LM35?
8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?
9. What is operating the operating temperature range in LM35?
10. Why LM35 is used to Measure Temperature?
11. List the devices used to sense temperature.

--- Content provided by FirstRanker.com ---

12. What is the purpose of a thermocouple?
13. What is the output voltage of a thermocouple?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 13 IMPLEMENTATION OF WIRELESS
COMMUNICATION PROTOCOL
USING ZIGBEE WIRELESS MODULE

--- Content provided by FirstRanker.com ---

Aim:
To implement wireless communication protocol using zigbee wireless module with the help of ARM
processor
Apparatus required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. Zigbee module
5. PC
Theory:

--- Content provided by FirstRanker.com ---

ZigBee is a specification to suite high level communication protocols using small, low-power digital
radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless
protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area
Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and
receiver modules which can do point to point communication. The Xbee is the brand name a wireless

--- Content provided by FirstRanker.com ---

transceiver device introduced by the Digi international which works on the ZigBee protocol and can form
PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific
fields, medical fields etc
Digi ZigBee:
The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.

--- Content provided by FirstRanker.com ---

The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to
transmit/receive or a framed mode providing advanced features. These modules can communicate point to
point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:


Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the wireless communication protocol using Zigbee wireless module is implemented using
LPC2148.

--- Content provided by FirstRanker.com ---

Outcome:
Able to form a wireless network using zigbee module and ARM controller

--- Content provided by FirstRanker.com ---

51 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. Used in traffic lights in non-urban areas
2. Used in building control systems
3. Used in asset tracking

--- Content provided by FirstRanker.com ---

4. Used in parking sensors

--- Content provided by FirstRanker.com ---

1. How many UART ports available in LPC2148?
2. What is the main function of voltage convertors in UART?
3. Why Zigbee based is preferred for wireless communication?
4. What is the IEEE standard for Zigbee protocol?
5. Write the two modes of communication are used in a ZigBee network.

--- Content provided by FirstRanker.com ---

6. What is the function of a scheduler?
7. Mention any two features of ?C/OS ? II.
8. Write the function for creating task in ?C/OS ? II.
9. Mention any two support devices for ?C/OS ? II.
10. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

52 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS

--- Content provided by FirstRanker.com ---

53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 14 BUZZER INTERFACE WITH ARM-7 LPC2148
Aim:
To write a program for buzzer interface with ARM processor and control its operation.
Apparatus required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
Theory:
Buzzer is an electronic device commonly used to produce sound. Light weight, simple construction and
low price make it usable in various applications like car/truck reversing indicator, computers, call bells etc.

--- Content provided by FirstRanker.com ---

Piezo buzzer is based on the inverse principle of piezo electricity discovered in 1880 by Jacques and Pierre
Curie. It is the phenomena of generating electricity when mechanical pressure is applied to certain
materials and the vice versa is also true. Such materials are called piezo electric materials. Piezo electric
materials are either naturally available or manmade. Piezo ceramic is class of manmade material, which
poses piezo electric effect and is widely used to make disc, the heart of piezo buzzer. When subjected to

--- Content provided by FirstRanker.com ---

an alternating electric field they stretch or compress, in accordance with the frequency of the signal thereby
producing sound.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the program for interfacing buzzer with ARM processor is written and executed and output is
verified.
Outcome:
Able to interface devices such as buzzer, relay with ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

55 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:

1. In alarm devices and timers
2. In confirmation of user input such as mouse click or keystroke
3. Alarming Circuits

--- Content provided by FirstRanker.com ---

4. Communication equipments
5. Automobile electronics
6. Portable equipments, due to its compact size

--- Content provided by FirstRanker.com ---

1. Define Buzzer.
2. Which pin in ARM can be used to modulate Buzzer?

--- Content provided by FirstRanker.com ---

3. What is the function Flash magic software?
4. How the Buzzer can be disconnected in LPC2148?
5. How the volume of sound will be changed in Buzzer?
6. What is a buzzer
7. What are the applications of buzzer?

--- Content provided by FirstRanker.com ---

8. How buzzer is used in embedded system?
9. What is race round condition?
10. What is digital signal controller?
11. What are the features of buzzer circuit?
12. What is a semaphore?

--- Content provided by FirstRanker.com ---

13. What is mutexes?
14. What is the role of segment register?
15. What is watch dog timer?

Viva-voce

--- Content provided by FirstRanker.com ---

56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 15 RELAY INTERFACE WITH ARM - 7
Aim:
To write a program to interface 2 relays with LPC 2148 ARM Controller and verify its working.

--- Content provided by FirstRanker.com ---

Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:

--- Content provided by FirstRanker.com ---

A relay is an electrically operated switch. Many relays use an electromagnet to mechanically operate a
switch, but other operating principles are also used, such as solid-state relays. Relays are used where it is
necessary to control a circuit by a low-power signal (with complete electrical isolation between control and
controlled circuits), or where several circuits must be controlled by one signal. The first relays were used in
long distance telegraph circuits as amplifiers: they repeated the signal coming in from one circuit and re-

--- Content provided by FirstRanker.com ---

transmitted it on another circuit. Relays were used extensively in telephone exchanges and early
computers to perform logical operations.

--- Content provided by FirstRanker.com ---

57 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
57 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
The program for interfacing relays with ARM controller is done and its working is verified.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface devices such as relay with ARM controller and control them using programs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

58 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in homes, even in streets.
2. In automatic garage door for its movement and direction.

--- Content provided by FirstRanker.com ---

3. And even in refrigerators
4. In industries to provide energy on machineries.
5. In electrical fuel pump

--- Content provided by FirstRanker.com ---

1. What is the function of relay?
2. What is the function of Opto-isolator?
3. What is the function of power transistor in LPC2148?
4. Which pin acts as an output port for relay?

--- Content provided by FirstRanker.com ---

5. What is a relay circuit
6. what are the applications of relay circuit
7. what are the advantages of relay circuit
8. How does combination of functions reduce memory requirements in embedded systems?
9. What is the need for DMAC in ES?

--- Content provided by FirstRanker.com ---

10. Mention how I/O devices are classified for embedded system?
11. Explain what is interrupt latency? How can you reduce it?
12. What does DMA address will deal with?
13. List out various uses of timers in embedded system?
14. List out some of the commonly found errors in Embedded Systems?

--- Content provided by FirstRanker.com ---

15. What is the difference between macro and line function.



Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

59 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Creating the New Project:
1. To create a new project, choose Project>Create New Project. The Create New Project dialog box
appears which lets you base your new project on a project template.
2. Make sure the Tool chain is set to ARM, and click OK.
3. Select the project template Empty project, and click ok button. Which simply creates an empty project

--- Content provided by FirstRanker.com ---

that uses default project setting?
4. In the standard Save As dialog box that appears, specify where you want to place your project file, that
is, in your newly created projects directory. Type your project name in the File name box, and click Save
to create the new project. Eg. LED.
The project will appear in the Workspace window.

--- Content provided by FirstRanker.com ---

To Creating your Application ?C? file, Choose FILE menu and select NEW > File.
Edit the application code in C Language. Eg. Led.c
To Save your ?C? file, Choose File >Save As. In the standard Save As dialog box that appears, specify
where you want to place your project file, that is, in your project directory. Type your filename in the
Filename box, and click Save to create the new project. Eg. Led.c

--- Content provided by FirstRanker.com ---

Adding Files to the Project:
1. In the Workspace window, select the destination to which you want to add a source file; a group or, as in
this case, directly to the project.
2. Choose Project>Add Files to open a standard browse dialog box. Locate the files led.c select them in
the file selection list, and click Open to add them to the project1 project.

--- Content provided by FirstRanker.com ---

To save your work space, Choose File>Save Workspace and specify where you want to place your
workspace file. In this tutorial, you should place it in your newly created project directory. Type LED in
the File name box, and click save button.
GENERAL PROCEDURE

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.

--- Content provided by FirstRanker.com ---

2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones

--- Content provided by FirstRanker.com ---

2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?

--- Content provided by FirstRanker.com ---

5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?

--- Content provided by FirstRanker.com ---

10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?

--- Content provided by FirstRanker.com ---

15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the

--- Content provided by FirstRanker.com ---

computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.

--- Content provided by FirstRanker.com ---

The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function

--- Content provided by FirstRanker.com ---

Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and

--- Content provided by FirstRanker.com ---

executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:

--- Content provided by FirstRanker.com ---

1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?

--- Content provided by FirstRanker.com ---

4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?

--- Content provided by FirstRanker.com ---

9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE

--- Content provided by FirstRanker.com ---

WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter

--- Content provided by FirstRanker.com ---

(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,

--- Content provided by FirstRanker.com ---

Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores

--- Content provided by FirstRanker.com ---

the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :

--- Content provided by FirstRanker.com ---

1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?

--- Content provided by FirstRanker.com ---

3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-

--- Content provided by FirstRanker.com ---

weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?

--- Content provided by FirstRanker.com ---

12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along

--- Content provided by FirstRanker.com ---

with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches

--- Content provided by FirstRanker.com ---

connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of

--- Content provided by FirstRanker.com ---

LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?

--- Content provided by FirstRanker.com ---

4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?

--- Content provided by FirstRanker.com ---

9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?

--- Content provided by FirstRanker.com ---

14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?

--- Content provided by FirstRanker.com ---

19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK

--- Content provided by FirstRanker.com ---

AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the

--- Content provided by FirstRanker.com ---

date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers

--- Content provided by FirstRanker.com ---

2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?

--- Content provided by FirstRanker.com ---

5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?

--- Content provided by FirstRanker.com ---

10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?

--- Content provided by FirstRanker.com ---

15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not

--- Content provided by FirstRanker.com ---

connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :

--- Content provided by FirstRanker.com ---

1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?

--- Content provided by FirstRanker.com ---

4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?

--- Content provided by FirstRanker.com ---

9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?

--- Content provided by FirstRanker.com ---

18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:

--- Content provided by FirstRanker.com ---

EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration

--- Content provided by FirstRanker.com ---

Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial

--- Content provided by FirstRanker.com ---

EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?

--- Content provided by FirstRanker.com ---

4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?

--- Content provided by FirstRanker.com ---

9. What is PROM?
10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?

--- Content provided by FirstRanker.com ---

14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?

--- Content provided by FirstRanker.com ---

19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this

--- Content provided by FirstRanker.com ---

message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.

--- Content provided by FirstRanker.com ---

The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?

--- Content provided by FirstRanker.com ---

6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.

--- Content provided by FirstRanker.com ---

11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:

--- Content provided by FirstRanker.com ---

To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or

--- Content provided by FirstRanker.com ---

monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and

--- Content provided by FirstRanker.com ---

programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:

--- Content provided by FirstRanker.com ---

Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with

--- Content provided by FirstRanker.com ---

interrrupts
Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging

--- Content provided by FirstRanker.com ---

4. In bioinformatics and voice recognition



1. When is an Interrupt Request received?

--- Content provided by FirstRanker.com ---

2. What is ISR?
3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?

--- Content provided by FirstRanker.com ---

7. What is pipeline shutdown?
8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?

--- Content provided by FirstRanker.com ---

12. What is ITM?
13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital

--- Content provided by FirstRanker.com ---

states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?

--- Content provided by FirstRanker.com ---

P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface LED lights via the input output port and control them

--- Content provided by FirstRanker.com ---

Applications:
1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?

--- Content provided by FirstRanker.com ---

4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?

--- Content provided by FirstRanker.com ---

9. Where LEDs are used?
10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?

--- Content provided by FirstRanker.com ---

14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 11 STEPPER MOTOR INTERFACE WITH

--- Content provided by FirstRanker.com ---

ARM -7 LPC2148
Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in

--- Content provided by FirstRanker.com ---

the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil

--- Content provided by FirstRanker.com ---

wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is

--- Content provided by FirstRanker.com ---

turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications:

--- Content provided by FirstRanker.com ---

3. Used for precise positioning with a motor
4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

1. Define GPIO.
2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?

--- Content provided by FirstRanker.com ---

6. What is serial communication?
7. What is parallel communication?
8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?

--- Content provided by FirstRanker.com ---

11. What does instruction-pipelining mean?
12. What is the power supply required for ARM processor?
13. What is a unit for torque?
14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Temperature sensor
3. Interfacing cables
4. PC
Theory:
Temperature Sensor:

--- Content provided by FirstRanker.com ---

The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates

--- Content provided by FirstRanker.com ---

temperature. When the voltage increases then the temperature also rises. We can see this operation by
using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing temperature sensor with ARM controller is written and executed and
the temperature reading is seen on the monitor.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface different sensors with in-built ADC of the ARM processor and access the data
produced from them
Applications:
1. Used in Ovens, refrigerators
2. In HVAC environmental control

--- Content provided by FirstRanker.com ---

3. coolant or cylinder head temperatures
4. in the automotive industry to monitor air intake

--- Content provided by FirstRanker.com ---

1. What is LM35?
2. Define ISP.
3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?
4. What is the main function of analog pin in LPC 2148?
5. What is the output voltage produced by LM35 for one degree temperature?

--- Content provided by FirstRanker.com ---

6. What is the difference between LM 34 and LM 35 sensors?
7. How many pins are available in LM35?
8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?
9. What is operating the operating temperature range in LM35?
10. Why LM35 is used to Measure Temperature?

--- Content provided by FirstRanker.com ---

11. List the devices used to sense temperature.
12. What is the purpose of a thermocouple?
13. What is the output voltage of a thermocouple?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 13 IMPLEMENTATION OF WIRELESS
COMMUNICATION PROTOCOL

--- Content provided by FirstRanker.com ---

USING ZIGBEE WIRELESS MODULE
Aim:
To implement wireless communication protocol using zigbee wireless module with the help of ARM
processor
Apparatus required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. Zigbee module
5. PC

--- Content provided by FirstRanker.com ---

Theory:
ZigBee is a specification to suite high level communication protocols using small, low-power digital
radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless
protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area
Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and

--- Content provided by FirstRanker.com ---

receiver modules which can do point to point communication. The Xbee is the brand name a wireless
transceiver device introduced by the Digi international which works on the ZigBee protocol and can form
PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific
fields, medical fields etc
Digi ZigBee:

--- Content provided by FirstRanker.com ---

The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.
The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to
transmit/receive or a framed mode providing advanced features. These modules can communicate point to
point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the wireless communication protocol using Zigbee wireless module is implemented using

--- Content provided by FirstRanker.com ---

LPC2148.
Outcome:
Able to form a wireless network using zigbee module and ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

51 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in traffic lights in non-urban areas
2. Used in building control systems

--- Content provided by FirstRanker.com ---

3. Used in asset tracking
4. Used in parking sensors

--- Content provided by FirstRanker.com ---

1. How many UART ports available in LPC2148?
2. What is the main function of voltage convertors in UART?
3. Why Zigbee based is preferred for wireless communication?
4. What is the IEEE standard for Zigbee protocol?

--- Content provided by FirstRanker.com ---

5. Write the two modes of communication are used in a ZigBee network.
6. What is the function of a scheduler?
7. Mention any two features of ?C/OS ? II.
8. Write the function for creating task in ?C/OS ? II.
9. Mention any two support devices for ?C/OS ? II.

--- Content provided by FirstRanker.com ---

10. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

52 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS

--- Content provided by FirstRanker.com ---

53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 14 BUZZER INTERFACE WITH ARM-7 LPC2148
Aim:
To write a program for buzzer interface with ARM processor and control its operation.
Apparatus required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:
Buzzer is an electronic device commonly used to produce sound. Light weight, simple construction and

--- Content provided by FirstRanker.com ---

low price make it usable in various applications like car/truck reversing indicator, computers, call bells etc.
Piezo buzzer is based on the inverse principle of piezo electricity discovered in 1880 by Jacques and Pierre
Curie. It is the phenomena of generating electricity when mechanical pressure is applied to certain
materials and the vice versa is also true. Such materials are called piezo electric materials. Piezo electric
materials are either naturally available or manmade. Piezo ceramic is class of manmade material, which

--- Content provided by FirstRanker.com ---

poses piezo electric effect and is widely used to make disc, the heart of piezo buzzer. When subjected to
an alternating electric field they stretch or compress, in accordance with the frequency of the signal thereby
producing sound.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the program for interfacing buzzer with ARM processor is written and executed and output is
verified.
Outcome:
Able to interface devices such as buzzer, relay with ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

55 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:

1. In alarm devices and timers
2. In confirmation of user input such as mouse click or keystroke

--- Content provided by FirstRanker.com ---

3. Alarming Circuits
4. Communication equipments
5. Automobile electronics
6. Portable equipments, due to its compact size

--- Content provided by FirstRanker.com ---

1. Define Buzzer.

--- Content provided by FirstRanker.com ---

2. Which pin in ARM can be used to modulate Buzzer?
3. What is the function Flash magic software?
4. How the Buzzer can be disconnected in LPC2148?
5. How the volume of sound will be changed in Buzzer?
6. What is a buzzer

--- Content provided by FirstRanker.com ---

7. What are the applications of buzzer?
8. How buzzer is used in embedded system?
9. What is race round condition?
10. What is digital signal controller?
11. What are the features of buzzer circuit?

--- Content provided by FirstRanker.com ---

12. What is a semaphore?
13. What is mutexes?
14. What is the role of segment register?
15. What is watch dog timer?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 15 RELAY INTERFACE WITH ARM - 7
Aim:

--- Content provided by FirstRanker.com ---

To write a program to interface 2 relays with LPC 2148 ARM Controller and verify its working.
Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

Theory:
A relay is an electrically operated switch. Many relays use an electromagnet to mechanically operate a
switch, but other operating principles are also used, such as solid-state relays. Relays are used where it is
necessary to control a circuit by a low-power signal (with complete electrical isolation between control and
controlled circuits), or where several circuits must be controlled by one signal. The first relays were used in

--- Content provided by FirstRanker.com ---

long distance telegraph circuits as amplifiers: they repeated the signal coming in from one circuit and re-
transmitted it on another circuit. Relays were used extensively in telephone exchanges and early
computers to perform logical operations.

--- Content provided by FirstRanker.com ---

57 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
57 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
The program for interfacing relays with ARM controller is done and its working is verified.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface devices such as relay with ARM controller and control them using programs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

58 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in homes, even in streets.

--- Content provided by FirstRanker.com ---

2. In automatic garage door for its movement and direction.
3. And even in refrigerators
4. In industries to provide energy on machineries.
5. In electrical fuel pump

--- Content provided by FirstRanker.com ---

1. What is the function of relay?
2. What is the function of Opto-isolator?
3. What is the function of power transistor in LPC2148?

--- Content provided by FirstRanker.com ---

4. Which pin acts as an output port for relay?
5. What is a relay circuit
6. what are the applications of relay circuit
7. what are the advantages of relay circuit
8. How does combination of functions reduce memory requirements in embedded systems?

--- Content provided by FirstRanker.com ---

9. What is the need for DMAC in ES?
10. Mention how I/O devices are classified for embedded system?
11. Explain what is interrupt latency? How can you reduce it?
12. What does DMA address will deal with?
13. List out various uses of timers in embedded system?

--- Content provided by FirstRanker.com ---

14. List out some of the commonly found errors in Embedded Systems?
15. What is the difference between macro and line function.

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

59 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Creating the New Project:
1. To create a new project, choose Project>Create New Project. The Create New Project dialog box
appears which lets you base your new project on a project template.
2. Make sure the Tool chain is set to ARM, and click OK.

--- Content provided by FirstRanker.com ---

3. Select the project template Empty project, and click ok button. Which simply creates an empty project
that uses default project setting?
4. In the standard Save As dialog box that appears, specify where you want to place your project file, that
is, in your newly created projects directory. Type your project name in the File name box, and click Save
to create the new project. Eg. LED.

--- Content provided by FirstRanker.com ---

The project will appear in the Workspace window.
To Creating your Application ?C? file, Choose FILE menu and select NEW > File.
Edit the application code in C Language. Eg. Led.c
To Save your ?C? file, Choose File >Save As. In the standard Save As dialog box that appears, specify
where you want to place your project file, that is, in your project directory. Type your filename in the

--- Content provided by FirstRanker.com ---

Filename box, and click Save to create the new project. Eg. Led.c
Adding Files to the Project:
1. In the Workspace window, select the destination to which you want to add a source file; a group or, as in
this case, directly to the project.
2. Choose Project>Add Files to open a standard browse dialog box. Locate the files led.c select them in

--- Content provided by FirstRanker.com ---

the file selection list, and click Open to add them to the project1 project.
To save your work space, Choose File>Save Workspace and specify where you want to place your
workspace file. In this tutorial, you should place it in your newly created project directory. Type LED in
the File name box, and click save button.
GENERAL PROCEDURE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

60 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
60 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Setting Project Options:
Now you will set the project options. For application projects, options can be set on all levels of nodes.

--- Content provided by FirstRanker.com ---

First you will set the general options to suit the processor configuration in this tutorial. Because these
options must be the same for the whole build configuration, they must be set on the project node.
1. Select the project folder icon LED - Debug in the Workspace window and choose Project>Options. Then
select Output Converter in the Category list to display the linker option pages.
The Output options are used for specifying details about the output format and the level of debugging

--- Content provided by FirstRanker.com ---

information included in the output file.
Select ?option? on the popup menu.
After selecting popup menu window shows as given below.
Select output format as ?Intel Extended?, output file in the format of .hex format.
Select the linker file menu, linker configuration file available at project directory.

--- Content provided by FirstRanker.com ---

Choose Project>Rebuild ALL
If your project has no error Building completed and Hex file generated
For Creating the Hex file, we choose output file format as given below.
Select Linker file as given below.
To Compile this Project, Choose Project>Rebuild ALL

--- Content provided by FirstRanker.com ---

If there is no error, Message window shows like this. Now Hex file is created.
ISP Utility:
NXP Semiconductors produce a range of Microcontrollers that feature both on-chip Flash memory and
the ability to be reprogrammed using In-System Programming technology. Flash Magic is Windows
software that allows easy access to all the ISP features provided by the devices. These features include:

--- Content provided by FirstRanker.com ---

* Erasing the Flash memory (individual blocks or the whole device)
* Programming the Flash memory
* Modifying the Boot Vector and Status Byte
* Reading Flash memory
* Performing a blank check on a section of Flash memory

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________

--- Content provided by FirstRanker.com ---

Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and

--- Content provided by FirstRanker.com ---

training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels

--- Content provided by FirstRanker.com ---

? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to

--- Content provided by FirstRanker.com ---

shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry

--- Content provided by FirstRanker.com ---

? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION

--- Content provided by FirstRanker.com ---

VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge

--- Content provided by FirstRanker.com ---

to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions

--- Content provided by FirstRanker.com ---

3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in

--- Content provided by FirstRanker.com ---

the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field

--- Content provided by FirstRanker.com ---

b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems

--- Content provided by FirstRanker.com ---

e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility

--- Content provided by FirstRanker.com ---

i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems

--- Content provided by FirstRanker.com ---

? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:

--- Content provided by FirstRanker.com ---

1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD

--- Content provided by FirstRanker.com ---

6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor

--- Content provided by FirstRanker.com ---

11. Implementing zigbee protocol with ARM



? Write programs in ARM for a specific Application

--- Content provided by FirstRanker.com ---

? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system

--- Content provided by FirstRanker.com ---

COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.

--- Content provided by FirstRanker.com ---

CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16

--- Content provided by FirstRanker.com ---

3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22
5

--- Content provided by FirstRanker.com ---

Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31

--- Content provided by FirstRanker.com ---

CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43

--- Content provided by FirstRanker.com ---

12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:

--- Content provided by FirstRanker.com ---

To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These

--- Content provided by FirstRanker.com ---

are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power

--- Content provided by FirstRanker.com ---

consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital

--- Content provided by FirstRanker.com ---

televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high

--- Content provided by FirstRanker.com ---

end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.

--- Content provided by FirstRanker.com ---

3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with

--- Content provided by FirstRanker.com ---

conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.

--- Content provided by FirstRanker.com ---

9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.

--- Content provided by FirstRanker.com ---

13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.

--- Content provided by FirstRanker.com ---

16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator
4. Reset Circuit

--- Content provided by FirstRanker.com ---

5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted

--- Content provided by FirstRanker.com ---

into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.

--- Content provided by FirstRanker.com ---

Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and

--- Content provided by FirstRanker.com ---

its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:

--- Content provided by FirstRanker.com ---

ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

--- Content provided by FirstRanker.com ---

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books

--- Content provided by FirstRanker.com ---

3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?

--- Content provided by FirstRanker.com ---

6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?

--- Content provided by FirstRanker.com ---

11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?

--- Content provided by FirstRanker.com ---

16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and

--- Content provided by FirstRanker.com ---

convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is

--- Content provided by FirstRanker.com ---

the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the

--- Content provided by FirstRanker.com ---

A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins

--- Content provided by FirstRanker.com ---

as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.

--- Content provided by FirstRanker.com ---

2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?

--- Content provided by FirstRanker.com ---

5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?

--- Content provided by FirstRanker.com ---

10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or

--- Content provided by FirstRanker.com ---

voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for

--- Content provided by FirstRanker.com ---

industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,

--- Content provided by FirstRanker.com ---

Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and

--- Content provided by FirstRanker.com ---

out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :
1. DAC used in Audio amplifier.

--- Content provided by FirstRanker.com ---

2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?

--- Content provided by FirstRanker.com ---

4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?

--- Content provided by FirstRanker.com ---

8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?

--- Content provided by FirstRanker.com ---

13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 4 LED DIMMING USING PWM

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6

--- Content provided by FirstRanker.com ---

(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED

--- Content provided by FirstRanker.com ---

will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications :

--- Content provided by FirstRanker.com ---

1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED

--- Content provided by FirstRanker.com ---

5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?

--- Content provided by FirstRanker.com ---

10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?

--- Content provided by FirstRanker.com ---

15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?

--- Content provided by FirstRanker.com ---

20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT

--- Content provided by FirstRanker.com ---

Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt

--- Content provided by FirstRanker.com ---

service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?

--- Content provided by FirstRanker.com ---

6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.

--- Content provided by FirstRanker.com ---

11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

--- Content provided by FirstRanker.com ---

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection

--- Content provided by FirstRanker.com ---

between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system

--- Content provided by FirstRanker.com ---

2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?

--- Content provided by FirstRanker.com ---

5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?

--- Content provided by FirstRanker.com ---

10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?

--- Content provided by FirstRanker.com ---

19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:
I2C (Inter Integrated Circuit):

--- Content provided by FirstRanker.com ---

The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only

--- Content provided by FirstRanker.com ---

memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based

--- Content provided by FirstRanker.com ---

EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &

--- Content provided by FirstRanker.com ---

SCL I2C lines.



32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?

--- Content provided by FirstRanker.com ---

5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?

--- Content provided by FirstRanker.com ---

10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?

--- Content provided by FirstRanker.com ---

15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?

--- Content provided by FirstRanker.com ---

20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC

--- Content provided by FirstRanker.com ---

Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that

--- Content provided by FirstRanker.com ---

the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.

--- Content provided by FirstRanker.com ---

Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in Acorn RISC PC700

--- Content provided by FirstRanker.com ---

2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player


1. What is IPC?

--- Content provided by FirstRanker.com ---

2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt

--- Content provided by FirstRanker.com ---

7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and

--- Content provided by FirstRanker.com ---

FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.

--- Content provided by FirstRanker.com ---

Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7

--- Content provided by FirstRanker.com ---

LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM

--- Content provided by FirstRanker.com ---

counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts

--- Content provided by FirstRanker.com ---

Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?

--- Content provided by FirstRanker.com ---

3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?
7. What is pipeline shutdown?

--- Content provided by FirstRanker.com ---

8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?
12. What is ITM?

--- Content provided by FirstRanker.com ---

13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse

--- Content provided by FirstRanker.com ---

click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface LED lights via the input output port and control them
Applications:

--- Content provided by FirstRanker.com ---

1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?
4. What are the Pins which are used to connect LEDs?

--- Content provided by FirstRanker.com ---

5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?
9. Where LEDs are used?

--- Content provided by FirstRanker.com ---

10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?
14. What is an anti collision rate light?

--- Content provided by FirstRanker.com ---

15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 11 STEPPER MOTOR INTERFACE WITH
ARM -7 LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Stepper motor
3. Interfacing cables
4. PC
Theory:
A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).

--- Content provided by FirstRanker.com ---

Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in
the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage

--- Content provided by FirstRanker.com ---

only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil
wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using

--- Content provided by FirstRanker.com ---

soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is
turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way

--- Content provided by FirstRanker.com ---

to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.



44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications:
3. Used for precise positioning with a motor

--- Content provided by FirstRanker.com ---

4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

1. Define GPIO.

--- Content provided by FirstRanker.com ---

2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?
6. What is serial communication?

--- Content provided by FirstRanker.com ---

7. What is parallel communication?
8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?
11. What does instruction-pipelining mean?

--- Content provided by FirstRanker.com ---

12. What is the power supply required for ARM processor?
13. What is a unit for torque?
14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?
Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.
Apparatus Required:
1. LPC2148 ARM development board
2. Temperature sensor

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Temperature Sensor:
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly

--- Content provided by FirstRanker.com ---

proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates
temperature. When the voltage increases then the temperature also rises. We can see this operation by

--- Content provided by FirstRanker.com ---

using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the program for interfacing temperature sensor with ARM controller is written and executed and
the temperature reading is seen on the monitor.
Outcome:
Able to interface different sensors with in-built ADC of the ARM processor and access the data

--- Content provided by FirstRanker.com ---

produced from them
Applications:
1. Used in Ovens, refrigerators
2. In HVAC environmental control
3. coolant or cylinder head temperatures

--- Content provided by FirstRanker.com ---

4. in the automotive industry to monitor air intake



1. What is LM35?

--- Content provided by FirstRanker.com ---

2. Define ISP.
3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?
4. What is the main function of analog pin in LPC 2148?
5. What is the output voltage produced by LM35 for one degree temperature?
6. What is the difference between LM 34 and LM 35 sensors?

--- Content provided by FirstRanker.com ---

7. How many pins are available in LM35?
8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?
9. What is operating the operating temperature range in LM35?
10. Why LM35 is used to Measure Temperature?
11. List the devices used to sense temperature.

--- Content provided by FirstRanker.com ---

12. What is the purpose of a thermocouple?
13. What is the output voltage of a thermocouple?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 13 IMPLEMENTATION OF WIRELESS
COMMUNICATION PROTOCOL
USING ZIGBEE WIRELESS MODULE

--- Content provided by FirstRanker.com ---

Aim:
To implement wireless communication protocol using zigbee wireless module with the help of ARM
processor
Apparatus required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
4. Zigbee module
5. PC
Theory:

--- Content provided by FirstRanker.com ---

ZigBee is a specification to suite high level communication protocols using small, low-power digital
radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless
protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area
Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and
receiver modules which can do point to point communication. The Xbee is the brand name a wireless

--- Content provided by FirstRanker.com ---

transceiver device introduced by the Digi international which works on the ZigBee protocol and can form
PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific
fields, medical fields etc
Digi ZigBee:
The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.

--- Content provided by FirstRanker.com ---

The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to
transmit/receive or a framed mode providing advanced features. These modules can communicate point to
point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:


Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the wireless communication protocol using Zigbee wireless module is implemented using
LPC2148.

--- Content provided by FirstRanker.com ---

Outcome:
Able to form a wireless network using zigbee module and ARM controller

--- Content provided by FirstRanker.com ---

51 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. Used in traffic lights in non-urban areas
2. Used in building control systems
3. Used in asset tracking

--- Content provided by FirstRanker.com ---

4. Used in parking sensors

--- Content provided by FirstRanker.com ---

1. How many UART ports available in LPC2148?
2. What is the main function of voltage convertors in UART?
3. Why Zigbee based is preferred for wireless communication?
4. What is the IEEE standard for Zigbee protocol?
5. Write the two modes of communication are used in a ZigBee network.

--- Content provided by FirstRanker.com ---

6. What is the function of a scheduler?
7. Mention any two features of ?C/OS ? II.
8. Write the function for creating task in ?C/OS ? II.
9. Mention any two support devices for ?C/OS ? II.
10. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

52 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS

--- Content provided by FirstRanker.com ---

53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 14 BUZZER INTERFACE WITH ARM-7 LPC2148
Aim:
To write a program for buzzer interface with ARM processor and control its operation.
Apparatus required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
Theory:
Buzzer is an electronic device commonly used to produce sound. Light weight, simple construction and
low price make it usable in various applications like car/truck reversing indicator, computers, call bells etc.

--- Content provided by FirstRanker.com ---

Piezo buzzer is based on the inverse principle of piezo electricity discovered in 1880 by Jacques and Pierre
Curie. It is the phenomena of generating electricity when mechanical pressure is applied to certain
materials and the vice versa is also true. Such materials are called piezo electric materials. Piezo electric
materials are either naturally available or manmade. Piezo ceramic is class of manmade material, which
poses piezo electric effect and is widely used to make disc, the heart of piezo buzzer. When subjected to

--- Content provided by FirstRanker.com ---

an alternating electric field they stretch or compress, in accordance with the frequency of the signal thereby
producing sound.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus the program for interfacing buzzer with ARM processor is written and executed and output is
verified.
Outcome:
Able to interface devices such as buzzer, relay with ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

55 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:

1. In alarm devices and timers
2. In confirmation of user input such as mouse click or keystroke
3. Alarming Circuits

--- Content provided by FirstRanker.com ---

4. Communication equipments
5. Automobile electronics
6. Portable equipments, due to its compact size

--- Content provided by FirstRanker.com ---

1. Define Buzzer.
2. Which pin in ARM can be used to modulate Buzzer?

--- Content provided by FirstRanker.com ---

3. What is the function Flash magic software?
4. How the Buzzer can be disconnected in LPC2148?
5. How the volume of sound will be changed in Buzzer?
6. What is a buzzer
7. What are the applications of buzzer?

--- Content provided by FirstRanker.com ---

8. How buzzer is used in embedded system?
9. What is race round condition?
10. What is digital signal controller?
11. What are the features of buzzer circuit?
12. What is a semaphore?

--- Content provided by FirstRanker.com ---

13. What is mutexes?
14. What is the role of segment register?
15. What is watch dog timer?

Viva-voce

--- Content provided by FirstRanker.com ---

56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 15 RELAY INTERFACE WITH ARM - 7
Aim:
To write a program to interface 2 relays with LPC 2148 ARM Controller and verify its working.

--- Content provided by FirstRanker.com ---

Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:

--- Content provided by FirstRanker.com ---

A relay is an electrically operated switch. Many relays use an electromagnet to mechanically operate a
switch, but other operating principles are also used, such as solid-state relays. Relays are used where it is
necessary to control a circuit by a low-power signal (with complete electrical isolation between control and
controlled circuits), or where several circuits must be controlled by one signal. The first relays were used in
long distance telegraph circuits as amplifiers: they repeated the signal coming in from one circuit and re-

--- Content provided by FirstRanker.com ---

transmitted it on another circuit. Relays were used extensively in telephone exchanges and early
computers to perform logical operations.

--- Content provided by FirstRanker.com ---

57 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
57 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
The program for interfacing relays with ARM controller is done and its working is verified.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface devices such as relay with ARM controller and control them using programs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

58 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in homes, even in streets.
2. In automatic garage door for its movement and direction.

--- Content provided by FirstRanker.com ---

3. And even in refrigerators
4. In industries to provide energy on machineries.
5. In electrical fuel pump

--- Content provided by FirstRanker.com ---

1. What is the function of relay?
2. What is the function of Opto-isolator?
3. What is the function of power transistor in LPC2148?
4. Which pin acts as an output port for relay?

--- Content provided by FirstRanker.com ---

5. What is a relay circuit
6. what are the applications of relay circuit
7. what are the advantages of relay circuit
8. How does combination of functions reduce memory requirements in embedded systems?
9. What is the need for DMAC in ES?

--- Content provided by FirstRanker.com ---

10. Mention how I/O devices are classified for embedded system?
11. Explain what is interrupt latency? How can you reduce it?
12. What does DMA address will deal with?
13. List out various uses of timers in embedded system?
14. List out some of the commonly found errors in Embedded Systems?

--- Content provided by FirstRanker.com ---

15. What is the difference between macro and line function.



Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

59 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Creating the New Project:
1. To create a new project, choose Project>Create New Project. The Create New Project dialog box
appears which lets you base your new project on a project template.
2. Make sure the Tool chain is set to ARM, and click OK.
3. Select the project template Empty project, and click ok button. Which simply creates an empty project

--- Content provided by FirstRanker.com ---

that uses default project setting?
4. In the standard Save As dialog box that appears, specify where you want to place your project file, that
is, in your newly created projects directory. Type your project name in the File name box, and click Save
to create the new project. Eg. LED.
The project will appear in the Workspace window.

--- Content provided by FirstRanker.com ---

To Creating your Application ?C? file, Choose FILE menu and select NEW > File.
Edit the application code in C Language. Eg. Led.c
To Save your ?C? file, Choose File >Save As. In the standard Save As dialog box that appears, specify
where you want to place your project file, that is, in your project directory. Type your filename in the
Filename box, and click Save to create the new project. Eg. Led.c

--- Content provided by FirstRanker.com ---

Adding Files to the Project:
1. In the Workspace window, select the destination to which you want to add a source file; a group or, as in
this case, directly to the project.
2. Choose Project>Add Files to open a standard browse dialog box. Locate the files led.c select them in
the file selection list, and click Open to add them to the project1 project.

--- Content provided by FirstRanker.com ---

To save your work space, Choose File>Save Workspace and specify where you want to place your
workspace file. In this tutorial, you should place it in your newly created project directory. Type LED in
the File name box, and click save button.
GENERAL PROCEDURE

--- Content provided by FirstRanker.com ---

60 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

60 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Setting Project Options:
Now you will set the project options. For application projects, options can be set on all levels of nodes.
First you will set the general options to suit the processor configuration in this tutorial. Because these

--- Content provided by FirstRanker.com ---

options must be the same for the whole build configuration, they must be set on the project node.
1. Select the project folder icon LED - Debug in the Workspace window and choose Project>Options. Then
select Output Converter in the Category list to display the linker option pages.
The Output options are used for specifying details about the output format and the level of debugging
information included in the output file.

--- Content provided by FirstRanker.com ---

Select ?option? on the popup menu.
After selecting popup menu window shows as given below.
Select output format as ?Intel Extended?, output file in the format of .hex format.
Select the linker file menu, linker configuration file available at project directory.
Choose Project>Rebuild ALL

--- Content provided by FirstRanker.com ---

If your project has no error Building completed and Hex file generated
For Creating the Hex file, we choose output file format as given below.
Select Linker file as given below.
To Compile this Project, Choose Project>Rebuild ALL
If there is no error, Message window shows like this. Now Hex file is created.

--- Content provided by FirstRanker.com ---

ISP Utility:
NXP Semiconductors produce a range of Microcontrollers that feature both on-chip Flash memory and
the ability to be reprogrammed using In-System Programming technology. Flash Magic is Windows
software that allows easy access to all the ISP features provided by the devices. These features include:
* Erasing the Flash memory (individual blocks or the whole device)

--- Content provided by FirstRanker.com ---

* Programming the Flash memory
* Modifying the Boot Vector and Status Byte
* Reading Flash memory
* Performing a blank check on a section of Flash memory

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

61 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

* Reading the signature bytes
* Reading and writing the security bits
* Direct load of a new baud rate (high speed communications)

--- Content provided by FirstRanker.com ---

* Sending commands to place device in Boot loader mode
Under Windows, only one application may have access the COM Port at any one time, preventing
other applications from using the COM Port. Flash Magic only obtains access to the selected COM Port
when ISP operations are being performed. This means that other applications that need to use the COM
Port, such as debugging tools, may be used while Flash Magic is loaded. Note that in this manual third

--- Content provided by FirstRanker.com ---

party Compilers are listed alphabetically. No preferences are indicated or implied.
Procedure to down load and run this program:
1. Select the COM Port
2. Select the Baud Rate
3. Select Device ( Eg.LPC2148)

--- Content provided by FirstRanker.com ---

4. Interface ? None ISP
5. Select Osc. Frequency ? 12Mhz
6. Enable ? Erase Blocks used by Hex files?
7. Select the Hex File to be downloaded.

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

?

--- Content provided by FirstRanker.com ---

DEPARTMENT OF
ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

Name : _______________________________________

--- Content provided by FirstRanker.com ---

Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and

--- Content provided by FirstRanker.com ---

enterprising professionals conforming to global standards through value based quality education and
training.

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different

--- Content provided by FirstRanker.com ---

levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

--- Content provided by FirstRanker.com ---

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

? To educate the students with the state-of-art technologies to meet the growing challenges of the

--- Content provided by FirstRanker.com ---

electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems
? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices

--- Content provided by FirstRanker.com ---

VISION
VISION
MISSION
MISSION

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of

--- Content provided by FirstRanker.com ---

engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence
To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find

--- Content provided by FirstRanker.com ---

solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which
enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism

--- Content provided by FirstRanker.com ---

To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context
5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in

--- Content provided by FirstRanker.com ---

the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in

--- Content provided by FirstRanker.com ---

Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability
c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits

--- Content provided by FirstRanker.com ---

d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities
g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate

--- Content provided by FirstRanker.com ---

awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning
k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

? Learn the working of ARM processor

--- Content provided by FirstRanker.com ---

? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems
? Write programs to interface memory, I/Os with processor
? Study the interrupt performance

--- Content provided by FirstRanker.com ---

LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC
3. Interfacing LED and PWM
4. Interfacing real time clock and serial port

--- Content provided by FirstRanker.com ---

5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox
8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS

--- Content provided by FirstRanker.com ---

10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system
? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.

--- Content provided by FirstRanker.com ---

? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
CONTENTS

--- Content provided by FirstRanker.com ---

Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1
Study of ARM evaluation system 7
2

--- Content provided by FirstRanker.com ---

Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19
4
LED dimming using PWM 22

--- Content provided by FirstRanker.com ---

5
Interfacing real time clock and serial port 25
6
Interfacing keypad and LCD 28
7

--- Content provided by FirstRanker.com ---

Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35
9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40

--- Content provided by FirstRanker.com ---

11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13
Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module

--- Content provided by FirstRanker.com ---

50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54
15 Relay interface with ARM? 7 57

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM

--- Content provided by FirstRanker.com ---

Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.
Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors

--- Content provided by FirstRanker.com ---

than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and
higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.

--- Content provided by FirstRanker.com ---

In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used
architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures

--- Content provided by FirstRanker.com ---

reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.
LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded

--- Content provided by FirstRanker.com ---

with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide
interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or

--- Content provided by FirstRanker.com ---

full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.
4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.

--- Content provided by FirstRanker.com ---

5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.
7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.

--- Content provided by FirstRanker.com ---

8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.
10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.

--- Content provided by FirstRanker.com ---

12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz
14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power

--- Content provided by FirstRanker.com ---

optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


First Step- Hardware Requirement:
Pin configuration of LPC 2148.

--- Content provided by FirstRanker.com ---

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly
2. Power Supply
3. Crystal Oscillator

--- Content provided by FirstRanker.com ---

4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,

--- Content provided by FirstRanker.com ---

basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids

--- Content provided by FirstRanker.com ---

and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.
Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

From the datasheet of LM117

--- Content provided by FirstRanker.com ---

Taking R 2= 240?, we get R 1=392?
Reset Circuit:
Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Oscillator Circuit:

--- Content provided by FirstRanker.com ---

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Recommended values are as shown in table:

--- Content provided by FirstRanker.com ---

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial
communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

--- Content provided by FirstRanker.com ---

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.
Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.

--- Content provided by FirstRanker.com ---

2. Able to know the components required for the working of ARM LPC2148

Applications:
ARM controller LPC2148 is used in no. of devices such as
1. Smart phones

--- Content provided by FirstRanker.com ---

2. Net books
3. E Readers
4. Digital TV
5. Home Gateways

--- Content provided by FirstRanker.com ---

1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?
3. Define - RISC
4. What are the instructions used to access the memory in ARM?

--- Content provided by FirstRanker.com ---

5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?
8. Define - Pipelining
9. What is cache miss?

--- Content provided by FirstRanker.com ---

10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?
13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?

--- Content provided by FirstRanker.com ---

15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR
INTERFACING
Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. PC
Theory:
Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the

--- Content provided by FirstRanker.com ---

computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the
moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.

--- Content provided by FirstRanker.com ---

The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully
accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function

--- Content provided by FirstRanker.com ---

Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and

--- Content provided by FirstRanker.com ---

executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog
quantity as input.
Applications:

--- Content provided by FirstRanker.com ---

1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes
4. Used in music reproduction technology.
5. Used in DSP if input is analog

--- Content provided by FirstRanker.com ---

1. What are the ADC operating modes in LPC2148?
2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?

--- Content provided by FirstRanker.com ---

4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?
7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?

--- Content provided by FirstRanker.com ---

9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?
12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 3 GENERATION OF RAMP AND SQUARE

--- Content provided by FirstRanker.com ---

WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip
DAC of LPC2148 ARM controller.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to
implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter

--- Content provided by FirstRanker.com ---

(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.
Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,

--- Content provided by FirstRanker.com ---

Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave
Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores

--- Content provided by FirstRanker.com ---

the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by
using these four lines.
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.
Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications :

--- Content provided by FirstRanker.com ---

1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics
4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?

--- Content provided by FirstRanker.com ---

3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?
6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-

--- Content provided by FirstRanker.com ---

weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?
10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?

--- Content provided by FirstRanker.com ---

12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?
15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:
To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO

--- Content provided by FirstRanker.com ---

Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning
2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along

--- Content provided by FirstRanker.com ---

with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.
The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches

--- Content provided by FirstRanker.com ---

connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.
Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of

--- Content provided by FirstRanker.com ---

LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects
3. In Narrow band sensors

--- Content provided by FirstRanker.com ---

1. What factors determine the LED dimming performance?
2. What is meant by analog dimming?
3. What is flickering effect?

--- Content provided by FirstRanker.com ---

4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?
7. What is the principle of zener diode?
8. What are the materials used to make LED?

--- Content provided by FirstRanker.com ---

9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?
12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?

--- Content provided by FirstRanker.com ---

14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?
17. Name the common formats available for LED display.
18. What are the types of seven segment display?

--- Content provided by FirstRanker.com ---

19. What is PWM?
20. What are the applications of PWM?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 5 INTERFACING REAL TIME CLOCK

--- Content provided by FirstRanker.com ---

AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM
controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to
save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the

--- Content provided by FirstRanker.com ---

date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time
Applications :
1. I2C In ARM and PIC microcontrollers

--- Content provided by FirstRanker.com ---

2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?
3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?

--- Content provided by FirstRanker.com ---

5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC
8. Through which port the date and time is displayed in RTC?
9. What is a serial port?

--- Content provided by FirstRanker.com ---

10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?
13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?

--- Content provided by FirstRanker.com ---

15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:
To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A
4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not

--- Content provided by FirstRanker.com ---

connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit Diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key
pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :

--- Content provided by FirstRanker.com ---

1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games
4. Used in portable video games and cell phones

--- Content provided by FirstRanker.com ---

1. What is Matrix keypad?
2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?

--- Content provided by FirstRanker.com ---

4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?
7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?

--- Content provided by FirstRanker.com ---

9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.
11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?

--- Content provided by FirstRanker.com ---

13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?
16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?

--- Content provided by FirstRanker.com ---

18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:
To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:

--- Content provided by FirstRanker.com ---

I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication
with a slave device. Data is exchanged between these devices.
EEPROM:

--- Content provided by FirstRanker.com ---

EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other
electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration

--- Content provided by FirstRanker.com ---

Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is
used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial

--- Content provided by FirstRanker.com ---

EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:
Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices
3. In laser printers
4. And also in embedded systems where program need not to be changed.

--- Content provided by FirstRanker.com ---

1. How does I2C protocol work?
2. What is EEPROM?
3. What is meant by master slave mode?

--- Content provided by FirstRanker.com ---

4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?
7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?

--- Content provided by FirstRanker.com ---

9. What is PROM?
10. What is EPROM?
11. What is mask ROM?
12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?

--- Content provided by FirstRanker.com ---

14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?
17. List the types of cache memories.
18. What is the use of an interrupt?

--- Content provided by FirstRanker.com ---

19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?


Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also
known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this

--- Content provided by FirstRanker.com ---

message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is
the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.

--- Content provided by FirstRanker.com ---

The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58
To down load and run this program: Refer General procedure in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time
systems

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?
4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?

--- Content provided by FirstRanker.com ---

6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.
9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.

--- Content provided by FirstRanker.com ---

11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

Aim:

--- Content provided by FirstRanker.com ---

To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or

--- Content provided by FirstRanker.com ---

monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be
displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and

--- Content provided by FirstRanker.com ---

programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:

--- Content provided by FirstRanker.com ---

Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.
Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with

--- Content provided by FirstRanker.com ---

interrrupts
Applications:
1. Used in random logic and SPLDs
2. Used in cryptography and filtering
3. In medical imaging

--- Content provided by FirstRanker.com ---

4. In bioinformatics and voice recognition



1. When is an Interrupt Request received?

--- Content provided by FirstRanker.com ---

2. What is ISR?
3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?
5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?

--- Content provided by FirstRanker.com ---

7. What is pipeline shutdown?
8. What is branch prediction?
9. What is the use of Neon Floating point engine?
10. What is the use of ?vectorize option?
11. What is PTM?

--- Content provided by FirstRanker.com ---

12. What is ITM?
13. What is ETM?
14. What is I2S interface?
15. What is the use of ?SWI? in ARM assembly?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 10 FLASHING OF LEDS
Aim:
To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital

--- Content provided by FirstRanker.com ---

states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of
microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?

--- Content provided by FirstRanker.com ---

P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:
Able to interface LED lights via the input output port and control them

--- Content provided by FirstRanker.com ---

Applications:
1. In Illumination
2. As status indicators in equipments
3. Stadium displays and dynamic decorative displays

--- Content provided by FirstRanker.com ---

1. What is seven segment displays?
2. What are the different configurations of LED?
3. What is the function of GPIO?

--- Content provided by FirstRanker.com ---

4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.
7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?

--- Content provided by FirstRanker.com ---

9. Where LEDs are used?
10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?
12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?

--- Content provided by FirstRanker.com ---

14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 11 STEPPER MOTOR INTERFACE WITH

--- Content provided by FirstRanker.com ---

ARM -7 LPC2148
Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor
in either directions.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing
a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in

--- Content provided by FirstRanker.com ---

the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.
The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil

--- Content provided by FirstRanker.com ---

wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated
torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is

--- Content provided by FirstRanker.com ---

turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications:

--- Content provided by FirstRanker.com ---

3. Used for precise positioning with a motor
4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

1. Define GPIO.
2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?
4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?

--- Content provided by FirstRanker.com ---

6. What is serial communication?
7. What is parallel communication?
8. What is stepper motor & why it is named so?
9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?

--- Content provided by FirstRanker.com ---

11. What does instruction-pipelining mean?
12. What is the power supply required for ARM processor?
13. What is a unit for torque?
14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148

--- Content provided by FirstRanker.com ---

Aim:
To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.
Apparatus Required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Temperature sensor
3. Interfacing cables
4. PC
Theory:
Temperature Sensor:

--- Content provided by FirstRanker.com ---

The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required
Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates

--- Content provided by FirstRanker.com ---

temperature. When the voltage increases then the temperature also rises. We can see this operation by
using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing temperature sensor with ARM controller is written and executed and
the temperature reading is seen on the monitor.
Outcome:

--- Content provided by FirstRanker.com ---

Able to interface different sensors with in-built ADC of the ARM processor and access the data
produced from them
Applications:
1. Used in Ovens, refrigerators
2. In HVAC environmental control

--- Content provided by FirstRanker.com ---

3. coolant or cylinder head temperatures
4. in the automotive industry to monitor air intake

--- Content provided by FirstRanker.com ---

1. What is LM35?
2. Define ISP.
3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?
4. What is the main function of analog pin in LPC 2148?
5. What is the output voltage produced by LM35 for one degree temperature?

--- Content provided by FirstRanker.com ---

6. What is the difference between LM 34 and LM 35 sensors?
7. How many pins are available in LM35?
8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?
9. What is operating the operating temperature range in LM35?
10. Why LM35 is used to Measure Temperature?

--- Content provided by FirstRanker.com ---

11. List the devices used to sense temperature.
12. What is the purpose of a thermocouple?
13. What is the output voltage of a thermocouple?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 13 IMPLEMENTATION OF WIRELESS
COMMUNICATION PROTOCOL

--- Content provided by FirstRanker.com ---

USING ZIGBEE WIRELESS MODULE
Aim:
To implement wireless communication protocol using zigbee wireless module with the help of ARM
processor
Apparatus required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. Zigbee module
5. PC

--- Content provided by FirstRanker.com ---

Theory:
ZigBee is a specification to suite high level communication protocols using small, low-power digital
radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless
protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area
Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and

--- Content provided by FirstRanker.com ---

receiver modules which can do point to point communication. The Xbee is the brand name a wireless
transceiver device introduced by the Digi international which works on the ZigBee protocol and can form
PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific
fields, medical fields etc
Digi ZigBee:

--- Content provided by FirstRanker.com ---

The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.
The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to
transmit/receive or a framed mode providing advanced features. These modules can communicate point to
point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the wireless communication protocol using Zigbee wireless module is implemented using

--- Content provided by FirstRanker.com ---

LPC2148.
Outcome:
Able to form a wireless network using zigbee module and ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

51 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in traffic lights in non-urban areas
2. Used in building control systems

--- Content provided by FirstRanker.com ---

3. Used in asset tracking
4. Used in parking sensors

--- Content provided by FirstRanker.com ---

1. How many UART ports available in LPC2148?
2. What is the main function of voltage convertors in UART?
3. Why Zigbee based is preferred for wireless communication?
4. What is the IEEE standard for Zigbee protocol?

--- Content provided by FirstRanker.com ---

5. Write the two modes of communication are used in a ZigBee network.
6. What is the function of a scheduler?
7. Mention any two features of ?C/OS ? II.
8. Write the function for creating task in ?C/OS ? II.
9. Mention any two support devices for ?C/OS ? II.

--- Content provided by FirstRanker.com ---

10. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

52 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS

--- Content provided by FirstRanker.com ---

53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 14 BUZZER INTERFACE WITH ARM-7 LPC2148
Aim:
To write a program for buzzer interface with ARM processor and control its operation.
Apparatus required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
Theory:
Buzzer is an electronic device commonly used to produce sound. Light weight, simple construction and

--- Content provided by FirstRanker.com ---

low price make it usable in various applications like car/truck reversing indicator, computers, call bells etc.
Piezo buzzer is based on the inverse principle of piezo electricity discovered in 1880 by Jacques and Pierre
Curie. It is the phenomena of generating electricity when mechanical pressure is applied to certain
materials and the vice versa is also true. Such materials are called piezo electric materials. Piezo electric
materials are either naturally available or manmade. Piezo ceramic is class of manmade material, which

--- Content provided by FirstRanker.com ---

poses piezo electric effect and is widely used to make disc, the heart of piezo buzzer. When subjected to
an alternating electric field they stretch or compress, in accordance with the frequency of the signal thereby
producing sound.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the program for interfacing buzzer with ARM processor is written and executed and output is
verified.
Outcome:
Able to interface devices such as buzzer, relay with ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

55 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:

1. In alarm devices and timers
2. In confirmation of user input such as mouse click or keystroke

--- Content provided by FirstRanker.com ---

3. Alarming Circuits
4. Communication equipments
5. Automobile electronics
6. Portable equipments, due to its compact size

--- Content provided by FirstRanker.com ---

1. Define Buzzer.

--- Content provided by FirstRanker.com ---

2. Which pin in ARM can be used to modulate Buzzer?
3. What is the function Flash magic software?
4. How the Buzzer can be disconnected in LPC2148?
5. How the volume of sound will be changed in Buzzer?
6. What is a buzzer

--- Content provided by FirstRanker.com ---

7. What are the applications of buzzer?
8. How buzzer is used in embedded system?
9. What is race round condition?
10. What is digital signal controller?
11. What are the features of buzzer circuit?

--- Content provided by FirstRanker.com ---

12. What is a semaphore?
13. What is mutexes?
14. What is the role of segment register?
15. What is watch dog timer?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 15 RELAY INTERFACE WITH ARM - 7
Aim:

--- Content provided by FirstRanker.com ---

To write a program to interface 2 relays with LPC 2148 ARM Controller and verify its working.
Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

Theory:
A relay is an electrically operated switch. Many relays use an electromagnet to mechanically operate a
switch, but other operating principles are also used, such as solid-state relays. Relays are used where it is
necessary to control a circuit by a low-power signal (with complete electrical isolation between control and
controlled circuits), or where several circuits must be controlled by one signal. The first relays were used in

--- Content provided by FirstRanker.com ---

long distance telegraph circuits as amplifiers: they repeated the signal coming in from one circuit and re-
transmitted it on another circuit. Relays were used extensively in telephone exchanges and early
computers to perform logical operations.

--- Content provided by FirstRanker.com ---

57 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
57 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
The program for interfacing relays with ARM controller is done and its working is verified.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface devices such as relay with ARM controller and control them using programs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

58 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. Used in homes, even in streets.

--- Content provided by FirstRanker.com ---

2. In automatic garage door for its movement and direction.
3. And even in refrigerators
4. In industries to provide energy on machineries.
5. In electrical fuel pump

--- Content provided by FirstRanker.com ---

1. What is the function of relay?
2. What is the function of Opto-isolator?
3. What is the function of power transistor in LPC2148?

--- Content provided by FirstRanker.com ---

4. Which pin acts as an output port for relay?
5. What is a relay circuit
6. what are the applications of relay circuit
7. what are the advantages of relay circuit
8. How does combination of functions reduce memory requirements in embedded systems?

--- Content provided by FirstRanker.com ---

9. What is the need for DMAC in ES?
10. Mention how I/O devices are classified for embedded system?
11. Explain what is interrupt latency? How can you reduce it?
12. What does DMA address will deal with?
13. List out various uses of timers in embedded system?

--- Content provided by FirstRanker.com ---

14. List out some of the commonly found errors in Embedded Systems?
15. What is the difference between macro and line function.

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

59 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Creating the New Project:
1. To create a new project, choose Project>Create New Project. The Create New Project dialog box
appears which lets you base your new project on a project template.
2. Make sure the Tool chain is set to ARM, and click OK.

--- Content provided by FirstRanker.com ---

3. Select the project template Empty project, and click ok button. Which simply creates an empty project
that uses default project setting?
4. In the standard Save As dialog box that appears, specify where you want to place your project file, that
is, in your newly created projects directory. Type your project name in the File name box, and click Save
to create the new project. Eg. LED.

--- Content provided by FirstRanker.com ---

The project will appear in the Workspace window.
To Creating your Application ?C? file, Choose FILE menu and select NEW > File.
Edit the application code in C Language. Eg. Led.c
To Save your ?C? file, Choose File >Save As. In the standard Save As dialog box that appears, specify
where you want to place your project file, that is, in your project directory. Type your filename in the

--- Content provided by FirstRanker.com ---

Filename box, and click Save to create the new project. Eg. Led.c
Adding Files to the Project:
1. In the Workspace window, select the destination to which you want to add a source file; a group or, as in
this case, directly to the project.
2. Choose Project>Add Files to open a standard browse dialog box. Locate the files led.c select them in

--- Content provided by FirstRanker.com ---

the file selection list, and click Open to add them to the project1 project.
To save your work space, Choose File>Save Workspace and specify where you want to place your
workspace file. In this tutorial, you should place it in your newly created project directory. Type LED in
the File name box, and click save button.
GENERAL PROCEDURE

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

60 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
60 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Setting Project Options:
Now you will set the project options. For application projects, options can be set on all levels of nodes.

--- Content provided by FirstRanker.com ---

First you will set the general options to suit the processor configuration in this tutorial. Because these
options must be the same for the whole build configuration, they must be set on the project node.
1. Select the project folder icon LED - Debug in the Workspace window and choose Project>Options. Then
select Output Converter in the Category list to display the linker option pages.
The Output options are used for specifying details about the output format and the level of debugging

--- Content provided by FirstRanker.com ---

information included in the output file.
Select ?option? on the popup menu.
After selecting popup menu window shows as given below.
Select output format as ?Intel Extended?, output file in the format of .hex format.
Select the linker file menu, linker configuration file available at project directory.

--- Content provided by FirstRanker.com ---

Choose Project>Rebuild ALL
If your project has no error Building completed and Hex file generated
For Creating the Hex file, we choose output file format as given below.
Select Linker file as given below.
To Compile this Project, Choose Project>Rebuild ALL

--- Content provided by FirstRanker.com ---

If there is no error, Message window shows like this. Now Hex file is created.
ISP Utility:
NXP Semiconductors produce a range of Microcontrollers that feature both on-chip Flash memory and
the ability to be reprogrammed using In-System Programming technology. Flash Magic is Windows
software that allows easy access to all the ISP features provided by the devices. These features include:

--- Content provided by FirstRanker.com ---

* Erasing the Flash memory (individual blocks or the whole device)
* Programming the Flash memory
* Modifying the Boot Vector and Status Byte
* Reading Flash memory
* Performing a blank check on a section of Flash memory

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

61 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

* Reading the signature bytes
* Reading and writing the security bits

--- Content provided by FirstRanker.com ---

* Direct load of a new baud rate (high speed communications)
* Sending commands to place device in Boot loader mode
Under Windows, only one application may have access the COM Port at any one time, preventing
other applications from using the COM Port. Flash Magic only obtains access to the selected COM Port
when ISP operations are being performed. This means that other applications that need to use the COM

--- Content provided by FirstRanker.com ---

Port, such as debugging tools, may be used while Flash Magic is loaded. Note that in this manual third
party Compilers are listed alphabetically. No preferences are indicated or implied.
Procedure to down load and run this program:
1. Select the COM Port
2. Select the Baud Rate

--- Content provided by FirstRanker.com ---

3. Select Device ( Eg.LPC2148)
4. Interface ? None ISP
5. Select Osc. Frequency ? 12Mhz
6. Enable ? Erase Blocks used by Hex files?
7. Select the Hex File to be downloaded.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

62 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Processing:
After completely downloaded, window shows

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

FirstRanker.com - FirstRanker's Choice

1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
1 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

?



DEPARTMENT OF

--- Content provided by FirstRanker.com ---

ELECTRONICS AND COMMUNICATION ENGINEERING

VII SEMESTER - R 2013

EC6711 ? EMBEDDED LABORATORY

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Name : _______________________________________
Register No : _______________________________________
Section : _______________________________________
LABORATORY MANUAL

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

2 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

is committed to provide highly disciplined, conscientious and
enterprising professionals conforming to global standards through value based quality education and
training.

--- Content provided by FirstRanker.com ---

? To provide competent technical manpower capable of meeting requirements of the industry
? To contribute to the promotion of Academic Excellence in pursuit of Technical Education at different
levels
? To train the students to sell his brawn and brain to the highest bidder but to never put a price tag on
heart and soul

--- Content provided by FirstRanker.com ---

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

To impart professional education integrated with human values to the younger generation, so as to
shape them as proficient and dedicated engineers, capable of providing comprehensive solutions to the
challenges in deploying technology for the service of humanity

--- Content provided by FirstRanker.com ---

? To educate the students with the state-of-art technologies to meet the growing challenges of the
electronics industry
? To carry out research through continuous interaction with research institutes and industry, on
advances in communication systems

--- Content provided by FirstRanker.com ---

? To provide the students with strong ground rules to facilitate them for systematic learning,
innovation and ethical practices
VISION
VISION
MISSION

--- Content provided by FirstRanker.com ---

MISSION

--- Content provided by FirstRanker.com ---

3 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)

--- Content provided by FirstRanker.com ---

1. Fundamentals
To provide students with a solid foundation in Mathematics, Science and fundamentals of
engineering, enabling them to apply, to find solutions for engineering problems and use this knowledge
to acquire higher education
2. Core Competence

--- Content provided by FirstRanker.com ---

To train the students in Electronics and Communication technologies so that they apply their
knowledge and training to compare, and to analyze various engineering industrial problems to find
solutions
3. Breadth
To provide relevant training and experience to bridge the gap between theory and practice which

--- Content provided by FirstRanker.com ---

enables them to find solutions for the real time problems in industry, and to design products
4. Professionalism
To inculcate professional and effective communication skills, leadership qualities and team spirit in
the students to make them multi-faceted personalities and develop their ability to relate engineering
issues to broader social context

--- Content provided by FirstRanker.com ---

5. Lifelong Learning/Ethics
To demonstrate and practice ethical and professional responsibilities in the industry and society in
the large, through commitment and lifelong learning needed for successful professional career

--- Content provided by FirstRanker.com ---

4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
4 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

PROGRAMME OUTCOMES (POs)
a) To demonstrate and apply knowledge of Mathematics, Science and engineering fundamentals in
Electronics and Communication Engineering field
b) To design a component, a system or a process to meet the specific needs within the realistic
constraints such as economics, environment, ethics, health, safety and manufacturability

--- Content provided by FirstRanker.com ---

c) To demonstrate the competency to use software tools for computation, simulation and testing of electronics
and communication engineering circuits
d) To identify, formulate and solve electronic and communication engineering problems
e) To demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks
f) To function as a member or a leader in multidisciplinary activities

--- Content provided by FirstRanker.com ---

g) To communicate in verbal and written form with fellow engineers and society at large
h) To understand the impact of Electronics and Communication Engineering in the society and demonstrate
awareness of contemporary issues and commitment to give solutions exhibiting social responsibility
i) To demonstrate professional & ethical responsibilities
j) To exhibit confidence in self-education and ability for lifelong learning

--- Content provided by FirstRanker.com ---

k) To participate and succeed in competitive exams

--- Content provided by FirstRanker.com ---

5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
5 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
EC6711 ? EMBEDDED LABORATORY
SYLLABUS

--- Content provided by FirstRanker.com ---

? Learn the working of ARM processor
? Understand the Building Blocks of Embedded Systems
? Learn the concept of memory map and memory interface
? Know the characteristics of Real Time Systems

--- Content provided by FirstRanker.com ---

? Write programs to interface memory, I/Os with processor
? Study the interrupt performance
LIST OF EXPERIMENTS:
1. Study of ARM evaluation system
2. Interfacing ADC and DAC

--- Content provided by FirstRanker.com ---

3. Interfacing LED and PWM
4. Interfacing real time clock and serial port
5. Interfacing keyboard and LCD
6. Interfacing EPROM and interrupt
7. Mailbox

--- Content provided by FirstRanker.com ---

8. Interrupt performance characteristics of ARM and FPGA
9. Flashing of LEDS
10. Interfacing stepper motor and temperature sensor
11. Implementing zigbee protocol with ARM

--- Content provided by FirstRanker.com ---

? Write programs in ARM for a specific Application
? Interface memory and Write programs related to memory operations
? Interface A/D and D/A convertors with ARM system

--- Content provided by FirstRanker.com ---

? Analyze the performance of interrupt
? Write programmes for interfacing keyboard, display, motor and sensor.
? Formulate a mini project using embedded system
COURSE OBJECTIVES
COURSE OUTCOMES

--- Content provided by FirstRanker.com ---

6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
6 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

EC6711 ? EMBEDDED LABORATORY
CONTENTS
Sl. No. Name of the Experiment Page No.
CYCLE 1 ? EXPERIMENTS
1

--- Content provided by FirstRanker.com ---

Study of ARM evaluation system 7
2
Analog to Digital Convertor interfacing 16
3
Generation of ramp and square wave using on-Chip DAC 19

--- Content provided by FirstRanker.com ---

4
LED dimming using PWM 22
5
Interfacing real time clock and serial port 25
6

--- Content provided by FirstRanker.com ---

Interfacing keypad and LCD 28
7
Interfacing EPROM and interrupt 31
CYCLE 2 ? EXPERIMENTS
8 Implementation of Mailbox Function using LPC 2148 35

--- Content provided by FirstRanker.com ---

9 Interrupt Performance Characteristics of Arm and FPGA 37
10 Flashing of LEDs 40
11 Stepper Motor Interface with ARM ? 7 LPC2148 43
12 LM35 Temperature Sensor Interface with ARM ? 7 LPC2148 47
13

--- Content provided by FirstRanker.com ---

Implementation of Wireless Communication Protocol using ZIGBEE Wireless
Module
50
ADDITIONAL EXPERIMENTS BEYOND THE SYYLABUS
14 Buzzer Interface with ARM ? 7 54

--- Content provided by FirstRanker.com ---

15 Relay interface with ARM? 7 57



7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

7 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Expt. No. 1 STUDY OF ARM EVALUATION SYSTEM
Aim:
To study the building blocks of ARM7 system, its features, pin configuration and the components
required for functioning of ARM controller.

--- Content provided by FirstRanker.com ---

Architecture Overview:
A RISC-based computer design approach means ARM processors require significantly fewer transistors
than typical processors in average computers. This approach reduces cost, heat and power usage. These
are desirable traits for light, portable, battery-powered devices (smart phones, laptops, tablet and notepad
computers), and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and

--- Content provided by FirstRanker.com ---

higher core counts at lower cost, providing higher processing power and improved energy efficiency for
servers and supercomputers.
In 2005, about 98% of all mobile phones sold used at least one ARM processor. The low power
consumption of ARM processors has made them very popular: 37 billion ARM processors have been
produced as of 2013, up from 10 billion in 2008. The ARM architecture (32-bit) is the most widely used

--- Content provided by FirstRanker.com ---

architecture in mobile devices, and most popular 32-bit one in embedded systems.
According to ARM Holdings, in 2010 alone, producers of chips based on ARM architectures
reported shipments of 6.1 billion ARM based processors, representing 95% of smart phones, 35% of digital
televisions and set-top boxes and 10% of mobile computers. It is the most widely used 32-bit instruction set
architecture in terms of quantity produced.

--- Content provided by FirstRanker.com ---

LPC 2148:
LPC2148 is the widely used IC from ARM-7 family. It is manufactured by Philips and it is pre-loaded
with many inbuilt peripherals making it more efficient and a reliable option for the beginners as well as high
end application developer.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

8 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Features of LPC214x series controllers:
1. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory.128 bit wide

--- Content provided by FirstRanker.com ---

interface/accelerator enables high speed 60 MHz operation.
2. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or
full chip erase in 400 ms and programming of 256 bytes in 1ms.
3. Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip Real
Monitor software and high speed tracing of instruction execution.

--- Content provided by FirstRanker.com ---

4. USB 2.0 Full Speed compliant Device Controller with 2 kB of endpoint RAM. In addition, the LPC2146/8
provides 8 kB of on-chip RAM accessible to USB by DMA.
5. One or two (LPC2141/2 vs. LPC2144/6/8) 10-bit A/D converters provide a total of 6/14analog inputs, with
conversion times as low as 2.44 us per channel.
6. Single 10-bit D/A converter provides variable analog output.

--- Content provided by FirstRanker.com ---

7. Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit
(six outputs) and watchdog.
8. Low power real-time clock with independent power and dedicated 32 kHz clock input.
9. Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with
buffering and variable data length capabilities.

--- Content provided by FirstRanker.com ---

10. Vectored interrupt controller with configurable priorities and vector addresses.
11. Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package.
12. Up to nine edge or level sensitive external interrupt pins available.
13. On-chip integrated oscillator operates with an external crystal in range from 1 MHz to30 MHz and with
an external oscillator up to 50 MHz

--- Content provided by FirstRanker.com ---

14. Power saving modes include Idle and Power-down.
15. Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power
optimization.
16. Processor wake-up from Power-down mode via external interrupt, USB, Brown-Out Detect (BOD) or
Real-Time Clock (RTC).

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

9 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

First Step- Hardware Requirement:
Pin configuration of LPC 2148.

Hardware requirement of LPC2148:
1. LPC2148 need minimum below listed hardware to work properly

--- Content provided by FirstRanker.com ---

2. Power Supply
3. Crystal Oscillator
4. Reset Circuit
5. RTC crystal oscillator
6. UART

--- Content provided by FirstRanker.com ---

10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
10 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Power Supply:
LPC2148 works on 3.3 V power supply. LM 117 can be used for generating 3.3 V supply. However,
basic peripherals like LCD, ULN 2003 (Motor Driver IC) etc. works on 5V. So AC mains supply is converted
into 5V using below mentioned circuit and after that LM 117 is used to convert 5V into 3.3V.
Block diagram of power Supply

--- Content provided by FirstRanker.com ---

Transformer: It is used to step down 230V AC to 9V AC supply and provides isolation between power grids
and circuit.
Rectifier: It is used to convert AC supply into DC.
Filter: It is used to reduce ripple factor of DC output available from rectifier end.

--- Content provided by FirstRanker.com ---

Regulator: It is used to regulate DC supply output.

--- Content provided by FirstRanker.com ---

11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
11 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Circuit Diagram:

--- Content provided by FirstRanker.com ---

Regulator IC 7805 is used to provide fix 5V dc supply.
LM 117 is used for generating 3.3V supply from 5V.

--- Content provided by FirstRanker.com ---

12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
12 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Calculations:

--- Content provided by FirstRanker.com ---

From the datasheet of LM117

Taking R 2= 240?, we get R 1=392?
Reset Circuit:

--- Content provided by FirstRanker.com ---

Reset button is essential in a system to avoid programming pitfalls and manually bring back the system
to the initialization mode. MCP 130T is a special IC used for providing stable RESET signal to LPC 2148.

--- Content provided by FirstRanker.com ---

13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
13 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Oscillator Circuit:

The value of capacitors C20 & C21 depends upon the frequency of crystal Y3. General circuit and
its equivalent circuit is as shown below.

--- Content provided by FirstRanker.com ---

14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
14 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Recommended values are as shown in table:

UART:
LPC 2148 has inbuilt ISP which means we can program it within the system using serial

--- Content provided by FirstRanker.com ---

communication on COM0. It has also COM1 for serial communication. MAX 232/233 IC must be used for
voltage logic conversion. Related connections are as given below.

Once the above listed circuit design is ready, we are ready to go further.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

15 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Result:
ARM Evaluation system and the configuration of LPC2148 has been studied fully. The minimal setup
required for the functioning of the ARM processor is studied.

--- Content provided by FirstRanker.com ---

Outcomes:
1. Able to understand the ARM controller, its basic components inside and its features.
2. Able to know the components required for the working of ARM LPC2148

Applications:

--- Content provided by FirstRanker.com ---

ARM controller LPC2148 is used in no. of devices such as
1. Smart phones
2. Net books
3. E Readers
4. Digital TV

--- Content provided by FirstRanker.com ---

5. Home Gateways


1. What are the basic units of ARM 7?
2. What is the address system supported by ARM?

--- Content provided by FirstRanker.com ---

3. Define - RISC
4. What are the instructions used to access the memory in ARM?
5. What are the basic units of Microprocessor?
6. What is an Instruction?
7. What is clock cycle?

--- Content provided by FirstRanker.com ---

8. Define - Pipelining
9. What is cache miss?
10. What is meant by memory mapped I/O?
11. Define ? interrupt
12. What is meant by Exception?

--- Content provided by FirstRanker.com ---

13. What is meant by little ? endian mode?
14. What is meant by big ? endian mode?
15. What is the function of CPSR?
16. What is register - indirect addressing?
Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

16 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 2 ANALOG TO DIGITAL CONVERTOR

--- Content provided by FirstRanker.com ---

INTERFACING
Aim:
To write an embedded c program for interfacing an on chip ADC with LPC2148 ARM processor and
convert the given input voltage into corresponding decimal values.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. PC
Theory:

--- Content provided by FirstRanker.com ---

Analog to Digital converter (ADC) is a device that converts continuously varying analog signals from
instruments that monitor such conditions as movement, temperature, sound, etc., into binary code for the
computer. It may be either a single chip or can be one circuit within a chip. Analog to Digital conversion is
the process of changing continuously varying data, such as voltage, current, or shaft rotation, into discrete
digital quantities that represent the magnitude of the data compared to a standard or reference at the

--- Content provided by FirstRanker.com ---

moment the conversion is made. According to the method of conversion, ADCs can be classified into
Direct-Conversion ADCs, Successive Approximation ADCs, Integrating ADC and Sigma-Delta ADCs.
The LPC 2148 has 10-bit successive approximation analog to digital converter. Basic clocking for the
A/D converters is provided by the VPB clock. A programmable divider is included in each converter, to
scale this clock to the 4.5 MHz (max) clock needed by the successive approximation process. A fully

--- Content provided by FirstRanker.com ---

accurate conversion requires 11 of these clocks. The ADC cell can measure the voltage on any of the ADC
input signals. It is noted that these analog inputs are always connected to their pins, even if the Pin function
Select register assigns them to port pins. A simple self-test of the ADC can be done by driving these pins
as port outputs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

17 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

18 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus, an embedded c program for interfacing on-chip ADC with ARM processor is written and
executed. The decimal values of the converted voltage are seen in the WinXTalk screen.
Outcome:
Able to interface A/D convertors with ARM system and check its working by connecting an analog

--- Content provided by FirstRanker.com ---

quantity as input.
Applications:
1. ADC used in MODEM for converting analog signals to digital.
2. A fast video ADC in TV tuner cards
3. ADC used in digital storage oscilloscopes

--- Content provided by FirstRanker.com ---

4. Used in music reproduction technology.
5. Used in DSP if input is analog


1. What are the ADC operating modes in LPC2148?

--- Content provided by FirstRanker.com ---

2. What is meant by conversion time?
3. Why are internal ADCs preferred over external ADCs?
4. Why has 16-bit ADC more resolution than from 10-bit and 8-bit ADC?
5. What are ADC & its Resolution?
6. What is Burst conversion mode?

--- Content provided by FirstRanker.com ---

7. What is the function of A/D Control Register?
8. What is the function of A/D Global Data Register?
9. What is the function of A/D Status Register?
10. What is analog-to-digital (ADC) conversion error?
11. What is the function of Sample-and-hold circuits in analog-to digital converters?

--- Content provided by FirstRanker.com ---

12. What is the disadvantage of the flash analog-to digital converter?
Viva-voce

--- Content provided by FirstRanker.com ---

19 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 3 GENERATION OF RAMP AND SQUARE
WAVE USING ON-CHIP DAC
Aim:
To write and execute an embedded c program to generate ramp wave and square wave using on-chip

--- Content provided by FirstRanker.com ---

DAC of LPC2148 ARM controller.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. CRO
Theory:
A digital-to-analog converter is a device for converting a digital signal into an analog signal (current or
voltage). Digital-to-Analog Converters are the interface between the abstract digital world and the analog
real world. Simple switches, a network of resistors, current sources or capacitors may be used to

--- Content provided by FirstRanker.com ---

implement this conversion. A DAC inputs a binary number and outputs an analog voltage or current signal.
The Microchip Technology Inc. MCP4921 is 2.7 ? 5.5V, low-power, 12-Bit Digital-to-Analog Converter
(DAC) with SPI interface. The MCP4921 DAC provides high accuracy and low noise performance for
industrial applications where calibration or compensation of signals is required. With an SPI connection
there is always one master device (usually a microcontroller) which controls the peripheral devices.

--- Content provided by FirstRanker.com ---

Typically there are three lines common to all the devices,
Master In Slave Out (MISO) ? The Slave line for sending data to the master,
Master Out Slave In (MOSI) ? The Master line for sending data to the peripherals,
Serial Clock (SCK) ? The clock pulses which synchronize data transmission generated by the
master and slave

--- Content provided by FirstRanker.com ---

Slave Select pin ? the pin on each device that the master can use to enable and disable specific
devices. When a device Slave Select pin is low, it communicates with the master. When it is high, it ignores
the master. In SPI, the clock signal is controlled by the master device LPC2148. All data is clocked in and
out using this pin. These lines need to be connected to the relevant pins on the LPC21xx processor. Any
unused GIO pin can be used for CS, instead pull this pin high. Conversion speed is the time it takes for the

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

20 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

DAC to provide an analog output when the digital input word is changed. The MCP4291 DAC ? SPI
connections with LPC21xx have four I/O lines (P0.4 ? P0.7) required. The analog output is generated by

--- Content provided by FirstRanker.com ---

using these four lines.
Circuit diagram:


Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the embedded c programs for generating ramp wave and square wave using ARM LPC2148 are
written and executed successfully and the waveforms are viewed in oscilloscope.

--- Content provided by FirstRanker.com ---

Outcome:
Able to program the DAC in-built inside the ARM controller and get the waveforms using it.

--- Content provided by FirstRanker.com ---

21 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. DAC used in Audio amplifier.
2. Video encoder
3. Display electronics

--- Content provided by FirstRanker.com ---

4. Data Acquistion systems
5. Motor control

--- Content provided by FirstRanker.com ---

1. What are the features of LPC2148 DAC?
2. What is the function of DAC register?
3. Which pin provides a voltage reference level for the D/A converter?
4. What are the applications of DAC in signal processing applications?
5. What is GIO?

--- Content provided by FirstRanker.com ---

6. What is the resolution of a digital-to-analog converter (DAC)?
7. What is the major advantage of the R/2R ladder digital-to-analog (DAC), as compared to a binary-
weighted digital-to-analog DAC converter?
8. What is the resolution of a 0?5 V 6-bit digital-to-analog converter (DAC) ?
9. What are DAC configurations?

--- Content provided by FirstRanker.com ---

10. What are the different types of DAC Circuits?
11. What are the Limitations of the Binary Weighted DAC?
12. What are the General DAC Characteristics?
13. Define reference voltage in DAC.
14. What is full scale voltage?

--- Content provided by FirstRanker.com ---

15. What is settling time?
VIVA-VOCE

--- Content provided by FirstRanker.com ---

22 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 4 LED DIMMING USING PWM

Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program for implementing PWM using ARM controller and verify the same by
dimming of LEDs.
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software

--- Content provided by FirstRanker.com ---

3. Interfacing cables
4. CRO
Theory:
LPC2148 supports 2 types of PWM:
1) Single Edge PWM ? Pulse starts with new Period i.e pulse is always at the beginning

--- Content provided by FirstRanker.com ---

2) Double Edge PWM ? Pulse can be anywhere within the Period
A PWM block, like a Timer block , has a Timer Counter and an associated Pre-scale Register along
with Match Registers. These work exactly the same way as in the case of Timers. Match Registers 1 to 6
(except 0) are pinned on LPC214x i.e. the corresponding outputs are diverted to actual Pins on LPC214x
MCU. The PWM function must be selected for these Pins to get the PWM output.

--- Content provided by FirstRanker.com ---

The basic setup is to simply replace Servo by a LED and no external 5V source is needed. The
anode of LED is connected to P0.0 and cathode to ground. Pulse Widths corresponding to the switches
connected to P0.1/2/3/4 will be 2.5ms/5ms/7.5ms/10ms respectively. As the Pulse Width Increases LED
will keep on getting brighter and the reverse will happen if Pulse Width is decreased.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

23 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus embedded c program for implementing Pulse Width Modulation is written and executed and
output has been verified in LED display.

--- Content provided by FirstRanker.com ---

Outcome:
Able to implement PWM using the ARM controller and verify the same in the form of dimming of
LEDS.

--- Content provided by FirstRanker.com ---

24 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications :
1. In Visual signals to covey a message
2. Illumination where light is reflected from objects

--- Content provided by FirstRanker.com ---

3. In Narrow band sensors



1. What factors determine the LED dimming performance?

--- Content provided by FirstRanker.com ---

2. What is meant by analog dimming?
3. What is flickering effect?
4. What is the factor determines dimming of the LED
5. Why Silicon is not suitable for fabrication of light-emitting diodes?
6. Why Silicon diode is less suited for low voltage rectifier operation?

--- Content provided by FirstRanker.com ---

7. What is the principle of zener diode?
8. What are the materials used to make LED?
9. What type of diodes is used in FM receivers?
10. Which diode suffers an avalanche breakdown?
11. What happens if the junction temperature of LED is increased?

--- Content provided by FirstRanker.com ---

12. How a transfer characteristic of a diode does is related?
13. What is the requirement of a clipping action of a diode?
14. What type of rectifier circuit requires four diodes?
15. Why are the pulse width modulated outputs required in most of the applications?
16. How do the variations in an average value get affected by PWM period?

--- Content provided by FirstRanker.com ---

17. Name the common formats available for LED display.
18. What are the types of seven segment display?
19. What is PWM?
20. What are the applications of PWM?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

25 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 5 INTERFACING REAL TIME CLOCK
AND SERIAL PORT
Aim:
To write and execute an embedded c program to interface DS1307 RTC using I2C protocol with ARM

--- Content provided by FirstRanker.com ---

controller
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
A clock, which is based on the interrupts at preset intervals, is Real Time Clock (RTC). An interrupt
service routine executes on each timeout (overflow) of this clock. This timing device once started never
resets or never reloaded with another value. Once it is set, it is not modified later. It is used in a system to

--- Content provided by FirstRanker.com ---

save the time and date.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

26 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the program for interfacing real time clock with ARM controller is written and executed and the
date and time are verified on the screen.
Outcome:
Able to interface real time clock DS1307 with ARM controller and thereby display date and time

--- Content provided by FirstRanker.com ---

Applications :
1. I2C In ARM and PIC microcontrollers
2. Used as serial communication protocol with MASTER and SLAVE operation.

--- Content provided by FirstRanker.com ---

27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
27 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

1. What is I2C and how does it work?
2. What are the features of I2C in LPC2148 ARM7 microcontroller?

--- Content provided by FirstRanker.com ---

3. What is the function of I2C0CONSET register?
4. What is I2C0STAT?
5. What is the function of I2C0 Data Register?
6. What is RTC?
7. List the advantages of RTC

--- Content provided by FirstRanker.com ---

8. Through which port the date and time is displayed in RTC?
9. What is a serial port?
10. List the registers used to transfer data in serial port.
11. List the modes used for data transmission.
12. What is a simplex mode?

--- Content provided by FirstRanker.com ---

13. Which pin is used to transmit a character?
14. What is the baud rate of serial port?
15. What is the disadvantage of RS-232C?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

28 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Expt. No. 6 INTERFACING KEYPAD AND LCD

Aim:

--- Content provided by FirstRanker.com ---

To write an embedded c program to interface 4 x 4 matrix keypad with ARM processor and display the
pressed key in an LCD.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:

In matrix keypad, keys are connected in rows and columns. When any switch is pressed, rows and
columns come into contact, which is that detected by controller to identify which key has been pressed. A

--- Content provided by FirstRanker.com ---

4?4 matrix keypad consists of 4 rows and 4 columns. There is a switch connecting each row and column.
So the combinations of rows and columns make up the 16 inputs.Initially all the switches are open (not
connected). When any one button is pressed, the switch is closed (connected),hence there is a connection
between the row and column. The first 4 pins are connected to the column as INPUT. The other 4 pins are
connected to the row as OUTPUT. Matrix keypad is a good substitution to normal push button.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

29 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Circuit Diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus program for interfacing matrix keypad with ARM controller is written and executed and the key

--- Content provided by FirstRanker.com ---

pressed is seen in the LCD.

--- Content provided by FirstRanker.com ---

30 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Outcome:

--- Content provided by FirstRanker.com ---

Able to interface keypad with ARM controller and see the pressed key in the LCD display.
Applications :
1. Used in password based door locking system
2. Security system with user changeable
3. Used in laptops, computer games

--- Content provided by FirstRanker.com ---

4. Used in portable video games and cell phones



1. What is Matrix keypad?

--- Content provided by FirstRanker.com ---

2. What is the concept behind keypad interface?
3. What are the functions of pull- up resistors?
4. What is key de bouncing?
5. List the steps involved when the key in a 4 x 4 keyboard matrix is being pressed.
6. What is the value obtained if no key is pressed?

--- Content provided by FirstRanker.com ---

7. What kind of interrupt is generated if a key has to be operated in an interrupt mode?
8. How will you identify that the key is pressed?
9. What are the steps involved in Keyboard Interfacing?
10. List the registers used to store the keyboard, display modes and other operations programmed by
CPU.

--- Content provided by FirstRanker.com ---

11. Name the mode when a data is entered from the left side of the display unit.
12. How many rows and columns are present in a 16 x 2 alphanumeric LCD?
13. How many data lines are there in a 16 x 2 alphanumeric LCD?
14. Which pin of the LCD is used for adjusting its contrast?
15. Which command of an LCD is used to shift the entire display to the right?

--- Content provided by FirstRanker.com ---

16. Which command is used to select the 2 lines and 5 x 7 matrix of an LCD?
17. What changes are to be made to send data to an LCD?
18. For reading operation from an LCD what changes in the software are introduced?
19. Which instruction is used to select the first row first column of an LCD?
Viva-voce

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

31 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 7 INTERFACING EEPROM AND INTERRUPT

Aim:

--- Content provided by FirstRanker.com ---

To write a program to interface EEPROM using I2C protocol with ARM controller and retrieve the stored
messages inside EEPROM.
Apparatus Required:
1. LPC2148 ARM development board
2. Interfacing cables

--- Content provided by FirstRanker.com ---

3. PC
Theory:
I2C (Inter Integrated Circuit):
The I2C (Inter-IC) bus is a bi-directional two-wire serial bus that provides a communication link between
integrated circuits (ICs).I2C is a synchronous protocol that allows a master device to initiate communication

--- Content provided by FirstRanker.com ---

with a slave device. Data is exchanged between these devices.
EEPROM:
EEPROM (electrically erasable programmable read-only memory) is user-modifiable read-only
memory (ROM) that can be erased and reprogrammed (written to) repeatedly through the application of
higher than normal electrical voltage. It is a type of non-volatile memory used in computers and other

--- Content provided by FirstRanker.com ---

electronic devices to store small amounts of data that must be saved when power is removed, e.g.,
calibration tables or device configuration
Read, write and Erase EEPROM by using I2C in LPC2148 Primer Board. Wiring up an I2C based
EEPROM to the I2C port is relatively simple. The basic operation of the I2C based EEPROM's is to send a
command, such as WRITE, followed by an address and the data. In WRITE operation, the EEPROM is

--- Content provided by FirstRanker.com ---

used to store the data. In LPC2148 Primer Kit, 2 nos. of EEPROM lines are controlled by I2C Enabled
drivers. I2C Lines serial clock SCL (P0.2), serial data SDA (P0.3) connected to the I2C based serial
EEPROM IC. The EEPROM read & write operations are done in LPC2148 Primer Kit by using these SDA &
SCL I2C lines.

--- Content provided by FirstRanker.com ---

32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
32 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To down load and run this program: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus, the program for interfacing I2C based EEPROM with ARM processor has been written and
executed successfully and the memory content is verified on Win x talk terminal.
Outcome:
Able to interface memory ICs with ARM controller and perform the read and write operations.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

33 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:
1. ROM used in toys,automobiles to store data when power is off
2. In calculators and peripheral devices

--- Content provided by FirstRanker.com ---

3. In laser printers
4. And also in embedded systems where program need not to be changed.


1. How does I2C protocol work?

--- Content provided by FirstRanker.com ---

2. What is EEPROM?
3. What is meant by master slave mode?
4. What is meant by non-volatile memory?
5. What is an interrupt?
6. How does an interrupt request works?

--- Content provided by FirstRanker.com ---

7. What is a nested interrupt?
8. What are the registers used for enabling an interrupt?
9. What is PROM?
10. What is EPROM?
11. What is mask ROM?

--- Content provided by FirstRanker.com ---

12. Which memory allows simultaneous read and write operations?
13. Which memory has the shortest access times?
14. Which interrupt has the highest priority?
15. What is non maskable interrupt?
16. Which is the first level of memory access by the microprocessor?

--- Content provided by FirstRanker.com ---

17. List the types of cache memories.
18. What is the use of an interrupt?
19. What is the use of converting an interrupt to threads in a microprocessor?
20. What are the bits used to control an external interrupts?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

34 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

CYCLE 2 - EXPERIMENTS

--- Content provided by FirstRanker.com ---

35 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 8 IMPLEMENTATION OF MAILBOX FUNCTION
USING LPC2148
Aim:
To create a mailbox in Micro C/OS ? II using LPC2148 ARM Controller
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Interfacing cables
3. PC
Theory:
System or the user code can send a message by the core services. A typical mail message, also

--- Content provided by FirstRanker.com ---

known as the exchange of information, refers to a task or an ISR using a pointer variable, through the core
services to put a message (that is, a pointer) into the mailbox. Similarly, one or more tasks can receive this
message by the core services. The tasks sending and receiving the message promise that the content that
the pointer points to is just that piece of message.
The mailbox of CooCox CoOS is a typical message mailbox which is composed of two parts: one is

--- Content provided by FirstRanker.com ---

the information which expressed by a pointer of void; the other is the waiting list which composed of the
tasks waiting for this mailbox. The waiting list supports two kinds of sorting: FIFO and preemptive priority.
The sorting mode is determined by the user when creating the mailbox.
Procedure:
To Edit / Compile / generate Hex file: Refer General procedure in Page No: 58

--- Content provided by FirstRanker.com ---

To down load and run this program: Refer General procedure in Page No: 60
Result:
Thus, the mailbox was created in Micro C/OS ?II and implemented using LPC2148.
Outcome:
Able to understand the concept of mail box in embedded systems and its significance in real time

--- Content provided by FirstRanker.com ---

systems

--- Content provided by FirstRanker.com ---

36 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. Used in Acorn RISC PC700
2. Used in ZIPIT wireless messenger
3. Used in Meizu M6 MINI player

--- Content provided by FirstRanker.com ---

1. What is IPC?
2. Define Queue.
3. What are the different types of mail box functions?

--- Content provided by FirstRanker.com ---

4. What is half duplex mode?
5. How many synchronous and asynchronous modes are there in serial port?
6. List the bits used to generate serial port interrupt
7. What is branch prediction?
8. Mention any two features of ?C/OS ? II.

--- Content provided by FirstRanker.com ---

9. Write the function for creating task in ?C/OS ? II.
10. Mention any two support devices for ?C/OS ? II.
11. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

37 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 9 INTERRUPT PERFORMANCE
CHARACTERISTICSOF ARM AND FPGA

--- Content provided by FirstRanker.com ---

Aim:
To study the interrupt performance characteristics of ARM and FPGA by using ARM controller kit and
FPGA kit separately.
Apparatus Required:

--- Content provided by FirstRanker.com ---

1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables
4. CRO
Theory:

--- Content provided by FirstRanker.com ---

External Interrupts:
An interrupt caused by an external source such as the computer operator, external sensor or
monitoring device, or another computer. Interrupts are special events that require immediate attention.
Interfacing External Interrupts with LPC2148:
When an external interrupt signal occurs in LPC2148 Primer Board, the message "LOW" will be

--- Content provided by FirstRanker.com ---

displayed on PC. The interrupt signal occurs using switches. When the switch is pressed to LOW, then the
external interrupt occurs. The Vectored Interrupt Controller (VIC) takes 32 interrupt request inputs and
programmable assigns them into 3 categories, FIQ, vectored IRQ, and non-vectored IRQ. The ARM7
LPC2148 Primer board has two numbers of External Interrupts, connected with I/O Port lines (P0.14 &
P0.15) as switches.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

38 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00



Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

39 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Result:
Thus the interrupt performance characteristics of ARM and FPGA are studied. On comparison, ARM
counts at slow speed because it consumes more instruction cycle and FPGA is more efficient for servicing
and processing external interrupt pulses.

--- Content provided by FirstRanker.com ---

Outcome:
Able to understand the performance characteristics of ARM and FPGA while dealing with
interrrupts
Applications:
1. Used in random logic and SPLDs

--- Content provided by FirstRanker.com ---

2. Used in cryptography and filtering
3. In medical imaging
4. In bioinformatics and voice recognition

--- Content provided by FirstRanker.com ---

1. When is an Interrupt Request received?
2. What is ISR?
3. How do you initialize interrupt?
4. What is Vectored Interrupt Controller?

--- Content provided by FirstRanker.com ---

5. What are the kinds of protection available for SRAMS ?
6. What is interrupt pipelining?
7. What is pipeline shutdown?
8. What is branch prediction?
9. What is the use of Neon Floating point engine?

--- Content provided by FirstRanker.com ---

10. What is the use of ?vectorize option?
11. What is PTM?
12. What is ITM?
13. What is ETM?
14. What is I2S interface?

--- Content provided by FirstRanker.com ---

15. What is the use of ?SWI? in ARM assembly?

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

40 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Expt. No. 10 FLASHING OF LEDS
Aim:

--- Content provided by FirstRanker.com ---

To write and execute an embedded c program to display LEDs using LPC 2148 ARM controller
Apparatus Required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

Theory:
LED (Light Emitting Diodes) is the most commonly used components, usually for displaying pins digital
states. Typical uses of LEDs include alarm devices, timers and confirmation of user input such as a mouse
click or keystroke. Interfacing LED with LPC2148 Flash a LED using LPC2148 Primer Board. It works by
turning ON a LED & then turning it OFF & then looping back to START. However the operating speed of

--- Content provided by FirstRanker.com ---

microcontroller is very high so the flashing frequency will also be very fast to be detected by human eye.
The ARM7 LPC2148 Primer board has eight numbers of point LEDs, connected with I/O Port lines (P1.16 ?
P1.23) to make port pins high.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

41 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus program for flashing of LEDs is written and executed using ARM controller LPC2148.

--- Content provided by FirstRanker.com ---

42 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface LED lights via the input output port and control them
Applications:
1. In Illumination
2. As status indicators in equipments

--- Content provided by FirstRanker.com ---

3. Stadium displays and dynamic decorative displays



1. What is seven segment displays?

--- Content provided by FirstRanker.com ---

2. What are the different configurations of LED?
3. What is the function of GPIO?
4. What are the Pins which are used to connect LEDs?
5. How to identify 'Polarity' of LED?
6. Differentiate LED from LCD.

--- Content provided by FirstRanker.com ---

7. What is a use of Jumper?
8. How many numbers of LEDs present in Primer board?
9. Where LEDs are used?
10. What is the use of flash magic software?
11. Which port is used in ARM 7 processor kit?

--- Content provided by FirstRanker.com ---

12. Which diode suffers an avalanche breakdown?
13. What happens if the junction temperature of LED is increased?
14. What is an anti collision rate light?
15. What is fail-safe conditions

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

43 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 11 STEPPER MOTOR INTERFACE WITH
ARM -7 LPC2148
Aim:
To write a program to interface stepper motor using ARM processor and control the movement of motor

--- Content provided by FirstRanker.com ---

in either directions.
Apparatus Required:
1. LPC2148 ARM development board
2. Stepper motor
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. PC
Theory:
A stepper motor can be viewed as a DC motor with number of poles (on both rotor and stator).
Additionally, soft magnetic material with many teeth on the rotor and stator cheaply multiplies the number of
poles (reluctance motor). Like an AC synchronous motor, it is ideally driven by sinusoidal current, allowing

--- Content provided by FirstRanker.com ---

a step less operation, but this puts some burden on the controller. When using an 8-bit digital controller,
256 micro steps per step are possible. As a digital-to-analog converter produces unwanted ohmic heat in
the controller, pulse-width modulation is used to regulate the mean current. Simpler models switch voltage
only for doing a step, thus needing an extra current limiter: for every step, they switch a single cable to the
motor.

--- Content provided by FirstRanker.com ---

The idea is to connect the output pins of the driver to 4 transistors. The transistor must be
grounded at the emitter and the driver pin must be connected to the base. Collector is connected to the coil
wire of the motor. Stepper motors are rated by the torque they produce. Synchronous electric motors using
soft magnetic materials (having a core) have the ability to provide position holding torque (called detent
torque, and sometimes included in the specifications) while not driven electrically. To achieve full rated

--- Content provided by FirstRanker.com ---

torque, the coils in a stepper motor must reach their full rated current during each step. The voltage rating
(if there is one) is almost meaningless. The motors also suffer from EMF, which means that once the coil is
turned off it starts to generate current because the motor is still rotating. There needs to be an explicit way
to handle this extra current in a circuit otherwise it can cause damage and affect performance of the motor.

--- Content provided by FirstRanker.com ---

44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
44 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:

--- Content provided by FirstRanker.com ---

Thus stepper motor interface with ARM processor has been successfully implemented and the motor is
controlled in clockwise and anticlockwise direction.
Outcome:
Able to interface the stepper motor with ARM controller and thereby create some rotational
movements

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

45 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
3. Used for precise positioning with a motor
4. Used in hard disk drives, robotics
5. Used in telescopes and toys

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

1. Define GPIO.
2. What is the function of ULN2803?
3. How LPC2148 control stepper motor?

--- Content provided by FirstRanker.com ---

4. Which I/O port lines used to rotate stepper motor?
5. How stepper motor reacts for each pulse it receives?
6. What is serial communication?
7. What is parallel communication?
8. What is stepper motor & why it is named so?

--- Content provided by FirstRanker.com ---

9. How can be step angle is calculated?
10. What are the advantages and disadvantages of parallel communication?
11. What does instruction-pipelining mean?
12. What is the power supply required for ARM processor?
13. What is a unit for torque?

--- Content provided by FirstRanker.com ---

14. What is RPM rating for a DC motor?
15. What device that is used to obtain an accurate position control of rotating shafts in terms of steps?
Viva-voce

--- Content provided by FirstRanker.com ---

46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
46 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 12 LM35 TEMPERATURE SENSOR INTERFACE
WITH ARM-7 LPC2148
Aim:
To write a program to interface of LM35 temperature sensor to on-chip ADC of ARM controller and
display the room temperature value on the screen.

--- Content provided by FirstRanker.com ---

Apparatus Required:
1. LPC2148 ARM development board
2. Temperature sensor
3. Interfacing cables
4. PC

--- Content provided by FirstRanker.com ---

Theory:
Temperature Sensor:
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The output of the sensor is converted to digital output
that is easy to connect with microcontroller. Temperature sensor has three terminals and required

--- Content provided by FirstRanker.com ---

Maximum of 5.5 V supply. This type of sensor consists of a material that performs the operation according
to temperature to vary the resistance. This change of resistance is sensed by circuit and it calculates
temperature. When the voltage increases then the temperature also rises. We can see this operation by
using a diode.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

47 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00


Circuit diagram:

--- Content provided by FirstRanker.com ---

48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
48 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing temperature sensor with ARM controller is written and executed and

--- Content provided by FirstRanker.com ---

the temperature reading is seen on the monitor.
Outcome:
Able to interface different sensors with in-built ADC of the ARM processor and access the data
produced from them
Applications:

--- Content provided by FirstRanker.com ---

1. Used in Ovens, refrigerators
2. In HVAC environmental control
3. coolant or cylinder head temperatures
4. in the automotive industry to monitor air intake

--- Content provided by FirstRanker.com ---

1. What is LM35?
2. Define ISP.
3. How many Analog-to-Digital Converters available as an inner peripheral in LPC2148?

--- Content provided by FirstRanker.com ---

4. What is the main function of analog pin in LPC 2148?
5. What is the output voltage produced by LM35 for one degree temperature?
6. What is the difference between LM 34 and LM 35 sensors?
7. How many pins are available in LM35?
8. Why Vref is set of ADC0848 to 2.56 V if analog input is connected to the LM35?

--- Content provided by FirstRanker.com ---

9. What is operating the operating temperature range in LM35?
10. Why LM35 is used to Measure Temperature?
11. List the devices used to sense temperature.
12. What is the purpose of a thermocouple?
13. What is the output voltage of a thermocouple?

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

49 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Expt. No. 13 IMPLEMENTATION OF WIRELESS
COMMUNICATION PROTOCOL
USING ZIGBEE WIRELESS MODULE
Aim:
To implement wireless communication protocol using zigbee wireless module with the help of ARM

--- Content provided by FirstRanker.com ---

processor
Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

4. Zigbee module
5. PC
Theory:
ZigBee is a specification to suite high level communication protocols using small, low-power digital
radios based on an IEEE 802 standard for personal area networks. The ZigBee is the name of a wireless

--- Content provided by FirstRanker.com ---

protocol maintained by the IEEE 802.15 standard. This is a protocol specified for wireless Personal Area
Network (PAN) using low powered wireless transceivers. There are already wireless transmitter and
receiver modules which can do point to point communication. The Xbee is the brand name a wireless
transceiver device introduced by the Digi international which works on the ZigBee protocol and can form
PAN networks. They have an approximate range of 10 to 100 meters and are used in industries, scientific

--- Content provided by FirstRanker.com ---

fields, medical fields etc
Digi ZigBee:
The Digi Xbee 802.15.4 modules are the easiest to use, most reliable and cost-effective RF devices.
The 802.15.4 Xbee modules provide two friendly modes of communication - a simple serial method to
transmit/receive or a framed mode providing advanced features. These modules can communicate point to

--- Content provided by FirstRanker.com ---

point, from one point to a PC, or in a mesh network.

--- Content provided by FirstRanker.com ---

50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
50 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

--- Content provided by FirstRanker.com ---

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
Thus the wireless communication protocol using Zigbee wireless module is implemented using
LPC2148.
Outcome:
Able to form a wireless network using zigbee module and ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

51 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

Applications:

--- Content provided by FirstRanker.com ---

1. Used in traffic lights in non-urban areas
2. Used in building control systems
3. Used in asset tracking
4. Used in parking sensors

--- Content provided by FirstRanker.com ---

1. How many UART ports available in LPC2148?
2. What is the main function of voltage convertors in UART?

--- Content provided by FirstRanker.com ---

3. Why Zigbee based is preferred for wireless communication?
4. What is the IEEE standard for Zigbee protocol?
5. Write the two modes of communication are used in a ZigBee network.
6. What is the function of a scheduler?
7. Mention any two features of ?C/OS ? II.

--- Content provided by FirstRanker.com ---

8. Write the function for creating task in ?C/OS ? II.
9. Mention any two support devices for ?C/OS ? II.
10. How many user tasks can be handled by ?C/OS ? II?

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

52 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

ADDITIONAL EXPERIMENTS

--- Content provided by FirstRanker.com ---

53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
53 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

Expt. No. 14 BUZZER INTERFACE WITH ARM-7 LPC2148
Aim:

--- Content provided by FirstRanker.com ---

To write a program for buzzer interface with ARM processor and control its operation.
Apparatus required:
1. LPC2148 ARM development board
2. Flash Magic software
3. Interfacing cables

--- Content provided by FirstRanker.com ---

Theory:
Buzzer is an electronic device commonly used to produce sound. Light weight, simple construction and
low price make it usable in various applications like car/truck reversing indicator, computers, call bells etc.
Piezo buzzer is based on the inverse principle of piezo electricity discovered in 1880 by Jacques and Pierre
Curie. It is the phenomena of generating electricity when mechanical pressure is applied to certain

--- Content provided by FirstRanker.com ---

materials and the vice versa is also true. Such materials are called piezo electric materials. Piezo electric
materials are either naturally available or manmade. Piezo ceramic is class of manmade material, which
poses piezo electric effect and is widely used to make disc, the heart of piezo buzzer. When subjected to
an alternating electric field they stretch or compress, in accordance with the frequency of the signal thereby
producing sound.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
54 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00
Circuit diagram:

Procedure:

--- Content provided by FirstRanker.com ---

To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60
Result:
Thus the program for interfacing buzzer with ARM processor is written and executed and output is
verified.

--- Content provided by FirstRanker.com ---

Outcome:
Able to interface devices such as buzzer, relay with ARM controller

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

55 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Applications:

--- Content provided by FirstRanker.com ---

1. In alarm devices and timers
2. In confirmation of user input such as mouse click or keystroke
3. Alarming Circuits
4. Communication equipments
5. Automobile electronics

--- Content provided by FirstRanker.com ---

6. Portable equipments, due to its compact size

--- Content provided by FirstRanker.com ---

1. Define Buzzer.
2. Which pin in ARM can be used to modulate Buzzer?
3. What is the function Flash magic software?
4. How the Buzzer can be disconnected in LPC2148?

--- Content provided by FirstRanker.com ---

5. How the volume of sound will be changed in Buzzer?
6. What is a buzzer
7. What are the applications of buzzer?
8. How buzzer is used in embedded system?
9. What is race round condition?

--- Content provided by FirstRanker.com ---

10. What is digital signal controller?
11. What are the features of buzzer circuit?
12. What is a semaphore?
13. What is mutexes?
14. What is the role of segment register?

--- Content provided by FirstRanker.com ---

15. What is watch dog timer?

Viva-voce

--- Content provided by FirstRanker.com ---

56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
56 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Expt. No. 15 RELAY INTERFACE WITH ARM - 7
Aim:
To write a program to interface 2 relays with LPC 2148 ARM Controller and verify its working.
Apparatus required:
1. LPC2148 ARM development board

--- Content provided by FirstRanker.com ---

2. Flash Magic software
3. Interfacing cables
Theory:
A relay is an electrically operated switch. Many relays use an electromagnet to mechanically operate a
switch, but other operating principles are also used, such as solid-state relays. Relays are used where it is

--- Content provided by FirstRanker.com ---

necessary to control a circuit by a low-power signal (with complete electrical isolation between control and
controlled circuits), or where several circuits must be controlled by one signal. The first relays were used in
long distance telegraph circuits as amplifiers: they repeated the signal coming in from one circuit and re-
transmitted it on another circuit. Relays were used extensively in telephone exchanges and early
computers to perform logical operations.

--- Content provided by FirstRanker.com ---

57 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
57 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Circuit diagram:

Procedure:
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 58
To Edit / Compile / generate Hex file: Refer General procedure given in Page No: 60

--- Content provided by FirstRanker.com ---

Result:
The program for interfacing relays with ARM controller is done and its working is verified.
Outcome:
Able to interface devices such as relay with ARM controller and control them using programs.

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

58 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Applications:
1. Used in homes, even in streets.
2. In automatic garage door for its movement and direction.
3. And even in refrigerators
4. In industries to provide energy on machineries.

--- Content provided by FirstRanker.com ---

5. In electrical fuel pump



1. What is the function of relay?

--- Content provided by FirstRanker.com ---

2. What is the function of Opto-isolator?
3. What is the function of power transistor in LPC2148?
4. Which pin acts as an output port for relay?
5. What is a relay circuit
6. what are the applications of relay circuit

--- Content provided by FirstRanker.com ---

7. what are the advantages of relay circuit
8. How does combination of functions reduce memory requirements in embedded systems?
9. What is the need for DMAC in ES?
10. Mention how I/O devices are classified for embedded system?
11. Explain what is interrupt latency? How can you reduce it?

--- Content provided by FirstRanker.com ---

12. What does DMA address will deal with?
13. List out various uses of timers in embedded system?
14. List out some of the commonly found errors in Embedded Systems?
15. What is the difference between macro and line function.

--- Content provided by FirstRanker.com ---

Viva-voce

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

59 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00


Creating the New Project:
1. To create a new project, choose Project>Create New Project. The Create New Project dialog box

--- Content provided by FirstRanker.com ---

appears which lets you base your new project on a project template.
2. Make sure the Tool chain is set to ARM, and click OK.
3. Select the project template Empty project, and click ok button. Which simply creates an empty project
that uses default project setting?
4. In the standard Save As dialog box that appears, specify where you want to place your project file, that

--- Content provided by FirstRanker.com ---

is, in your newly created projects directory. Type your project name in the File name box, and click Save
to create the new project. Eg. LED.
The project will appear in the Workspace window.
To Creating your Application ?C? file, Choose FILE menu and select NEW > File.
Edit the application code in C Language. Eg. Led.c

--- Content provided by FirstRanker.com ---

To Save your ?C? file, Choose File >Save As. In the standard Save As dialog box that appears, specify
where you want to place your project file, that is, in your project directory. Type your filename in the
Filename box, and click Save to create the new project. Eg. Led.c
Adding Files to the Project:
1. In the Workspace window, select the destination to which you want to add a source file; a group or, as in

--- Content provided by FirstRanker.com ---

this case, directly to the project.
2. Choose Project>Add Files to open a standard browse dialog box. Locate the files led.c select them in
the file selection list, and click Open to add them to the project1 project.
To save your work space, Choose File>Save Workspace and specify where you want to place your
workspace file. In this tutorial, you should place it in your newly created project directory. Type LED in

--- Content provided by FirstRanker.com ---

the File name box, and click save button.
GENERAL PROCEDURE

--- Content provided by FirstRanker.com ---

60 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00
60 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revis ion: 00

--- Content provided by FirstRanker.com ---

Setting Project Options:
Now you will set the project options. For application projects, options can be set on all levels of nodes.
First you will set the general options to suit the processor configuration in this tutorial. Because these
options must be the same for the whole build configuration, they must be set on the project node.
1. Select the project folder icon LED - Debug in the Workspace window and choose Project>Options. Then

--- Content provided by FirstRanker.com ---

select Output Converter in the Category list to display the linker option pages.
The Output options are used for specifying details about the output format and the level of debugging
information included in the output file.
Select ?option? on the popup menu.
After selecting popup menu window shows as given below.

--- Content provided by FirstRanker.com ---

Select output format as ?Intel Extended?, output file in the format of .hex format.
Select the linker file menu, linker configuration file available at project directory.
Choose Project>Rebuild ALL
If your project has no error Building completed and Hex file generated
For Creating the Hex file, we choose output file format as given below.

--- Content provided by FirstRanker.com ---

Select Linker file as given below.
To Compile this Project, Choose Project>Rebuild ALL
If there is no error, Message window shows like this. Now Hex file is created.
ISP Utility:
NXP Semiconductors produce a range of Microcontrollers that feature both on-chip Flash memory and

--- Content provided by FirstRanker.com ---

the ability to be reprogrammed using In-System Programming technology. Flash Magic is Windows
software that allows easy access to all the ISP features provided by the devices. These features include:
* Erasing the Flash memory (individual blocks or the whole device)
* Programming the Flash memory
* Modifying the Boot Vector and Status Byte

--- Content provided by FirstRanker.com ---

* Reading Flash memory
* Performing a blank check on a section of Flash memory

--- Content provided by FirstRanker.com ---

61 Format No.: FirstRanker/Stud/LM/34/I ssue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

* Reading the signature bytes
* Reading and writing the security bits
* Direct load of a new baud rate (high speed communications)
* Sending commands to place device in Boot loader mode
Under Windows, only one application may have access the COM Port at any one time, preventing

--- Content provided by FirstRanker.com ---

other applications from using the COM Port. Flash Magic only obtains access to the selected COM Port
when ISP operations are being performed. This means that other applications that need to use the COM
Port, such as debugging tools, may be used while Flash Magic is loaded. Note that in this manual third
party Compilers are listed alphabetically. No preferences are indicated or implied.
Procedure to down load and run this program:

--- Content provided by FirstRanker.com ---

1. Select the COM Port
2. Select the Baud Rate
3. Select Device ( Eg.LPC2148)
4. Interface ? None ISP
5. Select Osc. Frequency ? 12Mhz

--- Content provided by FirstRanker.com ---

6. Enable ? Erase Blocks used by Hex files?
7. Select the Hex File to be downloaded.

--- Content provided by FirstRanker.com ---

62 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00

--- Content provided by FirstRanker.com ---

Processing:

--- Content provided by FirstRanker.com ---

After completely downloaded, window shows

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

--- Content provided by FirstRanker.com ---

63 Format No.: FirstRanker/Stud/LM/34/Issue: 00/Revision: 00



List of Projects

--- Content provided by FirstRanker.com ---

? ARM LPC2148 Processor based Station Recognition System
? ARM LPC2148 Processor based remote bank locker system
? ARM7 LPC2148 Processor based vending machine
? ARM7 LPC2148 Processor based flood intimation system

--- Content provided by FirstRanker.com ---

? ARM7 LPC2148 Processor based Green House Control system
? ARM7 LPC 2148 Processor based Industrial monitor and control
? ARM7 LPC 2148 Processor based Advance car protection
? ARM7 LPC 2148 Processor based Industrial Fault detection and announciator
? ARM7 LPC 2148 Processor based Cell Phone Controlled Two Axis robotics with AI

--- Content provided by FirstRanker.com ---

? ARM7 LPC 2148 Processor based Cell Phone Controlled Three Axis robotics with AI



FirstRanker.com - FirstRanker's Choice

--- Content provided by FirstRanker.com ---