Download MBA HRM and Finance 1st and 2nd Semester Business Environmment and Law Notes

Download MBA (Master of Business Administration) HRM and Finance 1st and 2nd Semester Business Environmment and Law Notes


Lesson 1



BUSINESS AND ITS ENVIRONMENT




NATURE OF BUSINESS


Business may be understood as the organized efforts of enterprise to

supply consumers with goods and services for a profit. Businesses vary in size,

as measured by the number of employees or by sales volume. But, all businesses

share the same purpose: to earn profits.

The purpose of business goes beyond earning profit. There are:



? It is an important institution in society.
? Be it for the supply of goods and services
? Creation of job opportunities
? Offer of better quality of life
? Contributing to the economic growth of the country.

Hence, it is understood that the role of business is crucial. Society cannot

do without business. It needs no emphasis that business needs society as much.

BUSINESS TODAY


Modern business is dynamic. If there is any single word that can best

describe today's business, it is change. This change makes the companies spend

substantially on Research and development (R & D) to survive in the market.

Mass production and mass marketing are the norms followed by business

enterprises. The number of companies with an annual turnover of Rs.100 crore

each was only three in 1969-70.The figure has gone up by hundreds these days.

Today's business is characterized by diversification, which may be:

Concentric Diversification - It refers to the process of adding new, but relates
products or services.

Horizontal Diversification - Adding new, unrelated products or services for
present customers is called horizontal Diversification.

Conglomerate Diversification - It refers to adding new and unrelated products
or services.
Going international is yet another trend followed by modern business houses.

Business houses are exposed to global competition, which argues well for

consumers. Also occupying a major role is science in the global economic

scenario.

BUSINESS IN 21ST CENTURY


Large organizations, with a large workforce will not exist. They will be

`Mini' organizations. Business during the 21st century will be knowledge-based,

tomorrow's manager need not spend his time on file pushing and paper-shufling.

Information technology will take care of most of that work. Organizations will

become flat. Linear relationship between the boss and manger and authority

flowing downwards and obedience upward will disappear. Employees will have

no definite jobs. Most of the jobs will last for two to five years. Remuneration

will depend on one's contribution to organization.

BUSINESS GOALS

Profit - Making profit is the primary goal of any business enterprise.

Growth - Business should grow in all directions over a period of time.

Power - Business houses have vast resources at its command. These resources
confer enormous economic and political power.






2


Employee satisfaction and development - Business is people. Caring

for employee satisfaction and providing for their development has been

one of the objectives of enlightened business enterprises.

Quality Products and Services - Persistent quality of products earns
brand loyalty, a vital ingredient of success.

Market Leadership - To earn a niche for oneself in the market,
innovation is the key factor.

Challenging - Business offers vast scope and poses formidable
challenges.

Joy of creation - It is through business strategies new ideas and
innovations are given a shape and are converted into useful products and
services.

Service to society - Business is a part of society and has several
obligations towards it.

BUSINESS ENVIRONMENT

Environment refers to all external forces, which have a bearing on the

functioning of business. Environment factors "are largely if not totally, external

and beyond the control of individual industrial enterprises and their

managements. The business environment poses threats to a firm or offers

immense opportunities for potential market exploitation.

TYPES OF ENVIRONMENT

Environment includes such factors as socio-economic, technological, supplier,

competitor and the government. There are two more factors, which exercise

considerable influence on business. They are physical or natural environment

and global environment.





3



Technological Environment

Technology is understood as the systematic application of scientific or other

organized knowledge to practical tasks. Technology changes fast and to keep

pace with it, businessmen should be ever alert to adopt changed technology in

their businesses.


Economic Environment

There is close relationship between business and its economic environment.

Business obtains all its needed inputs from the economic environment and it

absorbs the output of business units.

Political Environment

It refers to the influence exerted by the three political institutions viz., legislature

executive and the judiciary in shaping, directing, developing and controlling

business activities. A stable and dynamic political environment is indispensable

for business growth.

Natural Environment

Business, an economic pursuit of man, continues to be dictated by nature. To

what extend business depends on nature and what is the relationship between the

two constitutes an interesting study.

Global or international Environment




Thanks to liberalization, Indian companies are forces to view business issues

from a global perspective. Business responses and managerial practices must be

fine-tuned to survive in the global environment.









4


Social and culture Environment

It refers to people's attitude to work and wealth; role of family, marriage,

religion and education; ethical issues and social responsiveness of business.

ENVIRONMENT ? BUSINESS RELATIONS

Business is the product of the technological, political-legal, economic, social ?

cultural, global and natural factors amidst which it functions. Three features are

common to this web of relationship between business and its environment.

? There is symbolic relationship between business and its environment and

among the environmental factors. In other words, business is influenced
by its environment and in turn, to certain degree, it will influence the
external forces. Similarly, political-legal environment influences
economic environment and vice versa. The same relationship between
other environment factors too.


? These environmental forces are dynamic. They keep on changing as

years roll by, so does business.


? The third feature is that a particular business firm, by itself, may not be

in a position to change its environment. But along with other firms,
business will be in a position to mould the environment in its favor.

IMPORTANCE OF ENVIRONMENTAL STUDY
The benefits of environmental study are as follows;


? Development of broad strategies and long-term policies of the firm.

? Development of action plans to deal with technological advancements.

? To foresee the impact of socio-economic changes at the national and

international levels on the firm's stability.

? Analysis of competitor's strategies and formulation of effective counter-

measures.

? To keep oneself dynamic.





5





ENVIRONMENTAL ANALYSIS PROCESS
The analysis consists of four sequential steps:

Scanning

It involves general surveillance of all environmental factors and their

interactions in order to:

? Identify early signals of possible environmental change

? Detect environmental change already underway


Monitoring

It involves tracking the environmental trends, sequences of events, or streams of

activities. It frequently involves following signals or indicators unearthed during

environmental scanning.


Forecasting




Strategic decision-making requires a future orientation. Naturally, forecasting is

an essential element in environmental analysis. Forecasting is concerned with

developing plausible projections of the direction, scope, and intensity of

environmental change.

Assessment




In assessment, the frame of reference moves from understanding the

environment- the focus of scanning, monitoring and forecasting ? to

identify what the understanding means for the organization. Assessment,

tries to answer questions such as what are the key issues presented by the

environment, and what are the implications of such issues for the

organization.





6


Lesson 2

CORPORATE GOVERNANCE, SOCIAL RESPONSIBILITY AND

BUSINESS ETHICS

CORPORATE GOVERNANCE

Corporate failures and widespread dissatisfaction with the way many corporate

functions have led to the realization, globally, of the need to put in place a

proper system for corporate governance.

Corporate governance is concerned with holding the balance between

economic and social goals and between individual and communal goals.

The governance framework is there to encourage the efficient use of

resources and equally to require accountability for the stewardship of

those resources.

The aim is to align as nearly as possible the interest of individuals,

corporations, and society. The incentive to corporations and to those who

own and manage them to adopt internationally accepted governance

standards is that these standards will help them to achieve their corporate

aims and to attract investment.

The incentive for their adoption by states is that these standards will

strengthen the economy and discourage fraud and mismanagement.

RELEVANCE

At least three reasons have triggered off concern in corporate governance

in our country.

? Since 1991, the country has moved into liberalized economy and

one of the victims of the market-based economy is transparent fair

business practice. Several instances of mismanagement have been

alleged, with some well-known and senior executive being hauled





7



up for non-performance and /or non-compliance with legal

requirements.

? Both domestic as well as foreign investors are becoming more

demanding in their approach towards the companies in which they

have invested their funds. They seek information and want to

influence decisions.

? Interests of non-promoter shareholder and those of small investors

are increasingly being undermined. Several MNCs have sought to

set up 100 percent subsidiaries and transfer their businesses to

them .In many cases, there was no thought of consultation with

non-promoter shareholders.

In this context, some norms of behavior to ensure responsive behavior

are of great help. Hence, corporate governance.

FOCUS

Corporate governance is concerned with the values, vision and visibility. It is

about the value orientation of the organization, ethical norms for its

performance, the direction of development and social accomplishment of the

organization and the visibility of its performance and practices.

Corporate management is concerned with the efficiency of the resources use,

value addition and wealth creation within the broad parameters of the corporate

philosophy established by corporate governance.


IMPORTANCE

? Studies of firms in India and abroad have shown that markets and

investors take notice of well-managed companies, respond positively to





8


them, and reward such companies, with higher valuations. In other words

they have a system of good corporate governance.

? Strong corporate governance is indispensable to resilient and vibrant

capital markets and is an important instrument of investor protection.

? Corporate governance prevents insider trading.
? Under corporate governance, corporates are expected to disseminate the

material price sensitive information in a timely and proper manner and

also ensures that till such information is made public, insiders abstain

from transacting in the securities of the company.

? The principle should be `disclose or desist'. Good corporate governance,

besides protecting the interests of shareholders and all other

stakeholders, contributes to the efficiency of a business enterprise, to the

creation of wealth and to the country's economy.

? Good corporate governance is considered vital from medium and long-

term perspectives to enable firms to compete internationally in sustained

way and make them, not only to improve standard of living materially

but also to enhance social cohesion.

PRE-REQUISITES



A system of good corporate governance requires the following:



? A proper system consisting of clearly defined and adequate structure

of roles, authority and responsibility.

? Vision, principles and norms, which indicate development path,

normative considerations, and guidelines and norms for performance.

? A proper system for guiding, monitoring, reporting and control.





9



SOCIAL RESPONSIBILTY

Social responsibility is the obligation of decision-makers to take actions, which

protect and improve the welfare of society as a whole along with their own

interests. Every decision the businessman takes and every action he

contemplates have social implications.



Be it deciding on diversification, expansion, opening of a new branch, and

closure of an existing branch or replacement of men by machines, the society is

affected in one way or the other. Whether the issue is significant or not, the

businessman should keep his social obligation in mind before contemplating any

action.


ARGUMENTS FOR SOCIAL RESPONSIBILITY


? Business has to respond to the needs and expectations of society.
? Improvement of the social environment benefits both society and

business.

? Social responsibility discourages additional governmental regulation and

intervention.

? Business has a great deal of power, which should be accompanied by an

equal amount of responsibility.

? Internal activities of the enterprise have an impact on the external

environment.

? The concept of social responsibility protects interests of stockholders.
? Social responsibility creates a favorable public image.
? Business has the resources to solve some of society's problems.





10


? It is better to prevent social problems through business involvement than

to cure them.

ARGUMENTS AGAINST SOCIAL RESPONBILITY


? Social responsibilities could reduce economic efficiency.
? Social responsibility would create excessive costs for business.
? Weakened international balance of payments
? Business has enough power, and social involvement would further

increase its power and influence.

? Business people lack the social skills necessary to deal with the problems

of society.

? Business is not really accountable to society.

SOCIAL STAKEHOLDERS

Managers, who are concerned about corporate social responsibility, need to

identify various interest groups which may affect the functioning of a business

organization and may be affected by its functioning. Business enterprises are

primarily responsible to six major groups:

? Shareholders
? Employees
? Customers
? Creditors, suppliers and others
? Society and
? Government.

These groups are called interest groups or social stakeholders. They can be

affected for better or worse by the business activities of corporations.







11



SOCIAL RESPONSIVENESS

Social responsiveness (SR) is "the ability of a corporation to relate it operations

and policies to the social environment in ways that are mutually beneficial to the

company and to society".



In other words, it refers to the development of organizational decision processes

whereby managers anticipate, respond to, and manage areas of social

responsibility. The need to measure the social responsiveness of an organization

led to the concept of social audit.





The social responsiveness of an organization can be measured on the basis of the

following criteria:



? Contributions to charitable and civic projects
? Assisting voluntary social organizations in fund-raising
? Employee involvement in civic activities
? Proper reuse of material
? Equal employment opportunity
? Promotion of minorities
? Direct corporate social responsiveness investment
? Fair treatment of employees
? Fair pay and safe working conditions
? Safe and quality products to consumers
? Pollution avoidance and control

BUSINESS EHTICS


The two issues - an organization's social responsibility and

responsiveness- ultimately depend on the ethical standards of mangers. The term





12


ethics commonly refers to the rules or principles that define right and wrong
conduct. Ethics is defined as the " discipline dealing with what is good and bad
and with moral duty and obligation". Business ethics is concerned with truth and
justice and has a variety of aspects such as expectations of society, fair
competition, advertising, public relations, social responsibilities, consumer
autonomy, and corporate behavior in the home country as well as abroad.

TYPES OF BUSINESS ETHICS

Moral management

Moral management strives to follow ethical principles and precepts, moral

mangers strive for success, but never violate the parameters of ethical standards.

They seek to succeed only within the ideas of fairness, and justice.

Moral managers follow the law not only in letter but also in spirit. The moral

management approach is likely to be in the best interests of the organization,

long run.

Amoral management

This approach is neither immoral nor moral. It ignores ethical considerations.

Amoral management is broadly categorized into two types ? intentional and

unintentional.

? Intentional amoral managers exclude ethical issues because they think

that general ethical standards are not appropriate to business.

? Unintentional amoral managers do not include ethical concerns because

they are inattentive or insensitive to the moral implications.



Immoral management



Immoral management is synonymous with "unethical" practices in

business. This kind of management not only ignores concerns, it is actively

opposed to ethical behavior.





13



NEED FOR BUSINESS ETHICS


? Ethics corresponds to basic human needs. It is human trait that man

desires to be ethical, not only in his private life but also in his business.

These basic ethical need compel the organizations to be ethically

oriented.

? Values create credibility with public. A company perceived by the public

to be ethically and socially responsive will be honored and respected.

The management has credibility with its employees precisely because it

has credibility with the public.

? An ethical attitude helps the management make better decisions, because

ethics will force a management to take various aspects- economic, social,

and ethical in making decisions.

? Value driven companies are sure to be successful in the long run, though

in the short run, they may lose money.

? Ethics is important because the government, law and lawyers cannot do

everything to protect society.

ETHICAL GUIDELINES


? Obeying the law: Obedience to the law, preferably both the letter and

spirit of the law.


? Tell the Truth: To build and maintain long-term, trusting and win-win

relationships with relevant stockholders.



? Uphold human dignity: Giving due importance to the element of

human dignity and treating people with respect.



? Adhere to the golden rule: "Do unto others as you would have others

do unto you"



? Premium Non-Nocere: (Above all, do no harm)





14


? Allow Room for participation: Soliciting the participation of

stakeholders rather than paternalism. It emphasizes the significance of

learning about the needs of stakeholders.

? Always Act When You Have Responsibility: Managers have the

responsibility of taking action whenever they have the capacity or

adequate resources to do so.

TOOLS FOR ETHICAL MANAGEMENT





? Top management commitment: Managers can prove their commitment

and dedication for work and by acting as role models through their own

behaviors.

? Codes of Ethics: A formal document that states an organization's

primary values and the ethical rules it expects employees to follow. The

code is helpful in maintaining ethical behavior among employees.

? Ethics committees: Appointment of an ethics committee, consisting of

internal and external directors is essential for institutionalizing ethical

behavior.

? Ethics Audits: Systematic assessment of conformance to organizational

ethical policies, understanding of those policies, and identification of

serious deviations requiring remedial action.

? Ethics training: Ethical training enables managers to integrate employee

behavior in ethical arena with major organizational goals.

? Ethics Hotline: A special telephone line that enables employees to

bypass the normal chain of command in reporting their experiences,

expectations and problem. The line is usually handled by an executive

appointed to help resolve the issues that are reported.





15



Lesson 3



ECONOMIC SYSTEMS

MEANING

Economic system is a social organism through which people make their

living. It is constituted of all those individuals, households, farms, firms,

factories, banks and government, which act and interact to produce and

consume goods and services. Individuals and households put their

resources (land, labour, capital and skill) to one or more of their

alternative uses and make their living; firms buy factors of production

and organize them in the process of production, produce goods and

services, and sell them to their users to make projects.

Consumers are able to get the goods and services of their requirement; producers

are able to produce and sell various kinds of products in appropriate quantities

and so on. The system is operated by, What Adam Smith called " invisible

hands", the market forces of demand and supply.

A modern economic system is enormously complex. Millions of people

participate and contribute to its working in different capacities ? as producers,

traders, workers, consumers and financers and so on. Thousands of people are

involved in production and distribution of single commodity. A community,

before it reaches its final consumer, passes through a complex process of

production and through a number of intermediary hands.


KINDS OF ECONOMIC SYSTEMS

Free Enterprise Economy

This economic system works on the principle of Laissez Faire system, i.e., the

least interference by the government or any external force. The primary role of





16


the government, if any, is to ensure free working of the economy by removing

obstacles to free competition.

A free Enterprise Economy is characterized as follows:


? Means of production are privately owned by the people who acquire and

posses them

? Private gains are the main motivating and guiding force for carrying out

economic activities

? Both consumers and firms enjoy the freedom of choice; consumers have

the freedom to consume what they want to and firms have the choice to

produce what they want to

? The factor owners enjoy the freedom of occupational choice, i.e., they

are free to use their resources in any legal business or occupation;

? There exists a high degree of competition in both commodity and factor

markets and

? There is least interference by the government in the economic activities

of the people; the government is in fact supposed to limit its traditional

functions viz, to defence, police, justice, some financial organizations

and public utility services.

Government Controlled Economy

The government-controlled economies are also called as Command, Centrally

planned or Socialist economies. Such economies are, in contradistinction to the

free enterprise economies, controlled, regulated and managed by the government

agencies.

The other features of a pure socialist economy are:







17



? Means of production are owned by the society or by the state in the name

of the community ? private ownership of factors and property is

abolished;

? Social welfare is the guiding factor for economic activities ? private

gains, motivations and initiatives are absent,

? Freedom of choice for the consumers is curbed to what society can

afford for all, and

? The role of market forces and competition is eliminated by law.

Mixed Economy

A mixed economy is one in which there exist both government and private

economic systems. It is supposed to combine good elements of both free

enterprise and socialist economies. A mixed economy is widely known as one,

which had both "public sector" (the government economy) and "private

sector" (the private economy). The private sector has features of a free

enterprise economy and the public sector has features of socialist economy. It is

important to note here that most economies in the world today are Mixed

Economies.

There are two different forms of the Mixed Economies.

? Mixed Capitalist Economies



A mixed Capitalist economy is a varient of the free enterprise economic system.

To this category fall the highly developed nations like the United States, U.K.,

France, Japan etc. though these economies have a very large government sector,

their private sectors work on the principles of the free enterprise system. The

government plays a significant role in preserving capitalist mode of production,

ensuring a workable competition in factor and product markets, providing

infrastructure for promotion of private sector economic activities.





18



? Mixed Socialist Economies



To the category of the Mixed Socialist Economies belong the countries which

have adopted " socialist pattern of society: and economic planning as he means

of growth and social justice (e.g. India) and the former communist countries (eg.

Russia and china) which have of late carried out drastic economic reforms and

liberalized their economies for private entrepreneurship. The government of

these countries takes upon themselves to control and regulate the private sector

activities in accordance with the plan objectives.

BASIC PROBLEMS OF AN ECONOMY AND THE ROLE OF
GOVERNMENT

Whatever the nature of the economic system, all types of economies have been

faced with certain common basic problems. The major economic problems faced

by an economy may be classified into two broad groups: (i) micro-economic

problems called basic problems, which are related to the working of the

constituents of the economic system; and (ii) macro-economic problems related

to the growth, stability, and management of the economy as a whole.

The way the basic problems of an economy are solved depends on the nature of

the economy. While in a socialist economy they are solved by the government

agencies, like central planning authority, in a free enterprise or mixed capitalist

economy this task is performed by the Price Mechanism or Market Mechanism.

Though free enterprise system is capable of bringing economic growth, it does

not ensure a stable, sustained, and balanced growth. It becomes therefore

inevitable for the government to intervene fair competition, and help the

economy in achieving its goals ? efficiency, stability, growth and economic

justice.





19



Now, the question arises as to what should be the appropriate role of the

government in economic management of the country or what should be the

form, nature and extent of government's interference with market mechanism.

Nevertheless, the economic role of the government can be broadly categorized

on the basis of the three economic systems which presently prevail in the world,

viz., Capitalist System or Free Enterprise System, Socialist System, and the

Mixed-Economy System.

Capital Society: In this system, the primary role of the government are: (i) to

preserve and promote free market mechanism wherever it is possible to ensure a

workable competition, (ii) to remove all unnecessary restrictions on the free

operation of competitive market, and (iii) to provide playground and rules of the

market game through necessary interventions and controls so that free

competition can work effectively.

It may be inferred that the government's role in a capitalist society is supposed

to be limited to (a) restoration and promotion of necessary conditions for

efficient working of free market mechanism; and (b) to enter those areas of

production and distribution in which private entrepreneurship is lacking or is

inefficient.

Socialist Economy: In contract with the capitalist system, the role of

government in a Socialist economy is much more exhaustive. While in the

former, the government is supposed to play a limited role in the economic

sphere, in the latter, it exercises comprehensive control on almost all economic

activities. In the socialist system, not only there is a complete disregard for free

enterprise and market mechanism but also these systems are abolished by law.

The private ownership of factors of production is replaced by the State

ownership. All economic activities are centrally planned, controlled and

regulated by the State. All decisions regarding production resources, allocation,





20


employment, pricing etc., are centralized in the hands of government or the

Central Planning Authority.

Mixed Economy: In this system, a major part of the economy, the private

sector, is allowed to function on the principles of free enterprise system or free

market mechanism within a broad political and economic policy framework.

The other part of the economy, the public sector, is organized and managed

along the socialist pattern. The public sector is created by reserving certain

industries, trade, services, and activities for the government control and

management. The government prevents by an ordinance the entry of private

capital into the industries reserved for the public sector. Another way of creating

or expanding the public sector is nationalization of existing industries. The

promotion, control and management of the public sector industries is the sole

responsibility of the State.

Apart from controlling and managing the public sector industries the

government controls and regulates the private sector through its industrial,

monetary and fiscal policies. If necessary, direct controls are also imposed.





21



Lesson 4

ECONOMIC TRANSITION IN INDIA:

PRIVATISATION AND GLOBALISATION



PRIVATISATION

Privatization, which has become a universal trend, means transfer of ownership

and/or management of an enterprise from the public sector to the private sector.

It also means the withdrawal of the state from an industry or sector, partially or

fully. Another dimension of privatization is opening up of an industry that has

been reserved for the public sector to the private sector.

Privatization is an inevitable historical reaction to the indiscriminate expansion

of the state sector and the associated problems. Even in the `communist'

countries it became a vital measure of economic rejuvenation.

OBJECTS

The objects are:

? To improve the performance of PSUs so as to lessen the financial

burden on taxpayers.

? To increase the size and dynamism of the private sector, distributing

ownership more widely in the population at large.

? To encourage and to facilitate private sector investments, from both

domestic and foreign sources.

? To generate revenues for the state
? To reduce the administrative burden on the state
? Launching and sustaining the transformation of the economy from a

command to a market model.





22


PRIVATISATION ROUTES

The important ways of privatization are:

? Divestiture, or privatization of ownership, through the sales of

equity.

? Denationalization or reprivatisation.
? Contracting - under which government contracts out services to other

organizations that produce and deliver them.

? Franchising- authorizing the delivery of certain services in

designated geographical areas- is common in utilities and urban

transport.

? Government withdrawing from the provision of certain goods and

services leaving then wholly or partly to the private sector.

? Privatization of management, using leases and management contracts
? Liquidation, which can be either formal or informal. Formal

liquidation involves the closure of an enterprise and the sale of its

assets. Under informal liquidation, a firm retains its legal status even

though some or all of its operations may be suspended.

BENEFITS



The benefits of privatization may be listed down as follows:

? It reduces the fiscal burden of the state by relieving it of the losses of

the SOEs and reducing the size of the bureaucracy.

? Privatization of SOEs enables the government to mop up funds.
? Privatization helps the state to trim the size of the administrative

machinery.

? It enables the government to concentrate more on the essential state

functions





23



? Privatization helps accelerate the pace of economic developments as

it attracts more resources from the private sector for development.

? It may result in better management of the enterprises.
? Privatization may also encourage entrepreneurship.
? Privatization may increase the number of workers and common man

who are shareholders. This could make the enterprises subject to

more public vigilance.

CRITICISMS

Some of the important argument against privatization is as follows:

? The public sector has been developed with certain noble objectives

and privatization means discarding them in one stroke.

? Privatization will encourage concentration of economic power to the

common detriment.

? If privatization results in the substitution of the monopoly power of

the public enterprises by the monopoly power of private enterprises it

will be very dangerous.

? Privatization many a time results in the acquisition of national firms

by foreign firms.

? Privatization of profitable enterprises, including potentially

profitable, means foregoing future streams of income for the

government.

? Privatization of strategic and vital sectors is against national interests.
? There are well managed and ill-managed firms both in the public and

private sectors. It is not sector that matters, but the quality and

commitment of the management.





24


? The capital markets of developing countries are not developed

enough for efficiently carrying out privatization.

? Privatization in many instances is a half-hearted measure and

therefore it is not properly carried out. As a result that the expected

results may not be achieved.

? In many instance, there are vested interested behind privatization and

it amounts deceiving the nation. In many countries privatization often

has been a "garage sale" to favored individuals and groups.

CONDITIONS FOR SUCCESS

? Privatization cannot be sustained unless the political leadership is

committed to it, and unless it reflects a shift in the preferences of the

public arising out of dissatisfaction with the performance of other

alternatives.

? Replacement of a government monopoly by a private monopoly may

not increase public welfare-there must a multiplicity of private

suppliers. Freedom of entry to provide goods and services.

? Public services to be provided by the private sector must be specific

or have measurable outcome.

? Lack of specificity makes it more difficult to control services

provided by the private sector. Service delivery by non-governmental

organizational or local governments may be more appropriate under

these conditions.

? Consumers should be able to link the benefits they receive from a

service to the costs they pay for it, since they will then shop more

wisely for difficult services.





25



? The importance of educating consumers and disseminating

information to the public is necessary.

? Privately provided services should be less susceptible to fraud than

government services if they are to be effective.

? Equity is an important consideration in the delivery of public

services. Broadly speaking, the benefits of privatization can accrue to

the capital owner to the consumer and to public at large.

PRIVATISATION IN INDIA

In India, although there were some isolated cases of privatization, no definite

policy decision was taken until the new economic policy was been ushered in

.The accumulated loses of many SOEs, including some state transport

corporations, are larger than the capital invested in them. Privatization of certain

sectors and enterprises are, therefore, necessary to reduce the budgetary burden

on the public, to make available more resources for the development activities,

to enable the government to concentrate more on the essential and priority areas.

The new industrial policy, which has abolished the public sector

monopoly in all but a very few industries is a significant step towards

Privatization. The new policy also proposes Privatization of enterprises by

selling shares to mutual funds, workers and the public. The central government

has been reviewing the existing portfolio of public investment with a view to

offloading public investment.

The disinvestments Commission was set up by Government of India in

August 1996, for suggesting the modalities for undertaking disinvestments of

equities for select PSUs. The commission has recommended disinvestments at

varying levels for a number of PSUs





26


PRIVATISATION POLICY

The current direction of Privatization policy is to put national resources

and assets to optimal use and in particular to unleash the productive potential

inherent in our public sector enterprises.

The policy of disinvestments specifically aimed at:

? Modernization and up gradation of Public Sector Enterprises.
? Creation of new assets.
? Generation of Employment
? Retiring of public debt
? To ensure that disinvestments does not result in alienation of national

assets, which through the process of disinvestments, remain where

they are. It will also ensure that disinvestment does not result in

private monopolies.

? Setting up a Disinvestments Proceeds Fund.
? Formulating the guidelines for the disinvestments of natural assets

companies.

GLOBALISATION

India's economic integration with the rest of the world was very limited because

of the restrictive economic policies followed until 1991. Indian firms confined

themselves, by and large, to the home market.

Foreign investment by Indian firms was very insignificant. With the new

economic policy ushered in 1991, there has, however, been change.

Globalization has in fact become a buzzword with Indian firms now and many

are expanding their overseas business by different strategies.





Globalization may be defined as " the growing economic

interdependence of countries worldwide through increasing volume and variety





27



of cross border transactions in goods and services and of international capital

flows, and also through the more rapid and widespread diffusion of technology".



Globalization may be considered at two levels .Viz, at the macro level

(i.e., globalization of the world economy) and at the micro level (i.e.,

globalization of the business and the firm).

Globalization of the world economy is achieved, quite obviously, by

globalising the national economies. Globalization of the economies and
globalization of business are very much interdependent.



REASONS FOR GLOBALISATION

? The rapid shrinking of time and distance across the globe thanks to faster

communication, speedier transportation, growing financial flows and

rapid technological changes.

? The domestic markets are no longer adequate rich. It is necessary to

search of international markets and to set up overseas production

facilities.

? Companies may choose for going international to find political stability,

which is relatively good in other countries.

? To get technology and managerial know-how.
? Companies often set up overseas plants to reduce high transportation

costs.

? Some companies set up plants overseas so as to be close to their raw

materials supply and to the markets for their finished products.

? Other developments also contribute to the increasing international of

business.

? The US, Canada and Mexico have signed the North American Free

Trade agreement (NAFTA), which will remove all barriers to trade

among these countries.





28


? The creation of the World Trade Organization (WTO) is stimulating

increased cross-border trade.

FEATURES

The following are the features of the current phase of globalization:

New markets

? Growing global markets in services ? banking, insurance, transport.
? New financial markets - deregulated, globally linked, working around

the clock, with action at a distance in real time, with new instruments

such as derivatives.

? Deregulation of anti - trust laws and proliferation of mergers and

acquisitions.

? Global consumer markets with global brands.

New actors

? Multinational corporations integrating their production and marketing,

dominating food production

? The World Trade Organization - the first multilateral organization with

authority to enforce national governments compliance with rule

? An international criminal court system in the making
? A booming international network of NGOs
? Regional blocs proliferating and gaining importance ? European Union,

Association of South- East Asian Nations, Mercosur, North American

Free Trade Association, Southern African Development Community,

among many others

? More policy coordination groups ? G-7, G40, G22, G77, OECD





29



New rules and Norms

? Market economic policies spreading around the world, with greater

privatization and liberalization than in earlier decades

? Widespread adoption of democracy as the choice of political regime
? Human rights conventions and instruments building up in both coverage

and number of signatories ? and growing awareness among people

around the world

? Consensus goals and action agenda for development
? Conventions and agreements on the global environment ? biodiversity,

ozone layer, disposal of hazardous wastes, desertification, climate

change

? Multilateral agreements in trade, taking on such new agendas as

environmental and social conditions

? New multilateral agreements- for services, intellectual property,

communications ? more binding on national governments than any

previous agreements

? The multilateral agreements on investment under debate

New Tools of communication

? Internet and electronic communications linking many people

simultaneously

? Cellular phones
? Fax machines
? Faster and cheaper transport by air, rail and road
? Computer-aided design





30


STAGES OF GLOBALISATION

There are five different stages in the development of a firm into global

corporations.

First stage

The first stage is the arm's length service activity of essentially domestic

company, which moves into new markets overseas by linking up with

local dealers and distributors.

Second stage

In the stage two, the company takes over these activities on its own.

Third stage



In the next stage, the domestic based company begins to carry out its own
manufacturing, marketing and sales in the key foreign markets.

Four stage
In the stage four, the company moves to a full insider position in these markets,

supported by a complete business system including R & D and engineering.

This stage calls on the managers to replicate in a new environment the

hardware, systems and operational approaches that have worked so well at

home.

Fifth stage

In the fifth stage, the company moves toward a genuinely global mode of

operation.

GLOBALISATION STRATEGIES

The various strategies of transiting a firm into global corpatation are as follows:





31



Exporting

Exporting, the most traditional mode of entering the foreign market is

quite a common one even now.

Licensing and Franchising

Under international licensing, a firm in one country (the licensor) permits a firm

in another country (the licensee) to use its intellectual property (such as patents,

trademarks, copyrights, technology, technical know-how, marketing skill or

some other specific skill).

Franchising is "a form of licensing in which a parent company (the

franchiser) grants another independent entity (the franchisee) the right to do

business in a prescribed manner.

Contract manufacturing

A company doing international marketing, contracts with firms in foreign

countries to manufacture or assemble the products while retaining the

responsibilities of marketing the product.

Management contracting

In a management contract the supplier brings together a package of skills that

will provide an integrated service to the client without incurring the risk and

benefit of ownership. The arrangement is especially attractive if the contracting

firm is given an option to purchase some shares in the managed company within

a stated period.

Turnkey contracts

A turnkey operation is an agreement by the seller to supply a buyer with a

facility fully equipped and ready to be operated by the buyer's personnel, who

will be trained by the seller.





32


Turnkey contracts are common in international business in the supply, erection

and commissioning of plants, as in the case of oil refineries, steel mills, cement

and fertilizer plants etc.

Wholly Owned Manufacturing Facilities

Companies with long term and substantial interest in the foreign market

normally establish fully owned manufacturing facilities there. This method

demands sufficient financial and managerial resources on the part of the

company.

Assembly operations

A manufacturer who wants many of the advantages that are associated with

overseas manufacturing facilities and yet does not want to go that far may find it

desirable to establish overseas assembly facilities in selected markets. The

establishment of an assembly operation represents a cross between exporting

and overseas manufacturing.

Joint Ventures

Any form of association, which implies collaboration for more than a transitory

period is a joint venture. Types of joint overseas operations are:

Sharing of ownership and management in an enterprise

Licensing / franchising agreements

Contract manufacturing

Management contracts

Third country location

When there are no commercial transactions between two nations because of

political reasons or when direct transactions between two nations are difficult

due to political reasons or the like, a firm in one of these nations which wants to

enter the other market will have to operate from a third country base. For





33



example, Taiwanese entrepreneurs found it easy to enter People's Republic of

china through bases in Hong Kong.

Mergers and acquisitions

Mergers and acquisitions (M & A) have been a very important market entry

strategy as well as expansion strategy. A number of Indian companies have also

used this entry strategy.

Strategic alliance

This strategy seeks to enhance the long-term competitive advantage of the firm

by forming alliance with its competitors, existing or potential in critical areas,

instead of competing with each other. Strategic alliance is also sometimes used

as a market entry strategy. For example, a firm may enter a foreign market by

forming an alliance with a firm in the foreign market.

Counter trade

Counter trade refers to a variety of unconventional international trade practices

which link exchange of goods- directly or indirectly ? in an attempt to dispense

with currency transactions. Counter trade is a form of international trade in

which certain export and import transactions are directly linked with each other

and in which import of goods are paid for by export of goods, instead of money

payments.

BENEFITS

The important arguments in favour of globalisation are:

? Productivity grows more quickly when countries produce goods and

services in which they have comparative advantage.



? Living standards can go up faster.
? Global competition and imports keep a lid on prices, so inflation is less

likely to derail economic growth.





34


? An open economy spurs innovation with fresh ideas from abroad.
? Export jobs often pay more than other jobs.
? Unfettered capital flows give access to foreign investment and keep

interest rates low.

DISADVANTAGES



Following are the cases against globalisation:

? Millions have lost jobs due to imports or production shifts abroad. Most

find new jobs that pay less.

? Millions of others fear losing their jobs, especially at those companies

operating under competitive pressure.

? Workers face pay cut demands from employers, which often threaten to

export jobs.

? Services and white-collar jobs are increasingly vulnerable to operations

moving offshore.

? Employees can lose their comparative advantage when companies build

advanced factories in low-wage countries, making them as productive as

those at home.

ESSENTIALS FOR GLOBALISATION

They are some essential conditions to be satisfied on the part of the domestic

economy as well as the firm for successful globalization of the business.

? Business freedom

There should not be unnecessary government restrictions like import

restriction, restrictions on sourcing finance or other factors from abroad,

foreign investments etc. the economic liberalization is regarded as a first

step towards facilitating globalization.





35



? Facilities

The extent to which an enterprise can develop globally from home

country base depends on the facilities available like the infrastructural

facilities.

? Government support

Government support may take the form of policy and procedural reforms,

development of common facilities like infrastructural facilities, R & D

support, financial market reforms and so on.

? Resources

Resourceful companies may find it easier to thrust ahead in the global market.

Resources include finance, technology, R & D capabilities, managerial

expertise, company and brand image, human resource etc.

? Competitiveness

A firm derives competitive advantage from any one or more of the

factors such as low costs and price, product quality, product

differentiation, technological superiority, after sales services, marketing

strength etc.

? Orientation

A global orientation on the part of the business firms and suitable globalization

strategies are essential for globalization.

GLOBALISATION IMPACT ON INDIAN ECONOMY

In India, the process of dismantling trade barriers was started in 1991 and

subsequently, every year the Government has been announcing reduction in

custom duties and removing quantitative restrictions. It is argued that this shall

enable free flow of goods, capital and technology and thus globalization

becomes a motivating force for nations to develop themselves at a faster rate.





36


For a developing country like India, it opens access to new markets and new

technology. Thus, the import-substitution strategy has been replaced by export-

led growth during the last decade in India. The recent developments in

information and communications technology have further facilitated and

accelerated the pace of globalization. International financial markets, trans-

border production networks and acceleration in capital flows across national

frontiers have been the driving forces leading to greater global integration of the

economies.





37



Lesson 5



NATURAL RESOURCES AND ECONOMIC DEVELOPMENT


NATURAL RESOURCES

Natural resources include land, water resources, fisheries, mineral resources,

forests, marine resources, climate, rainfall and topography. But nature possess

more in its bosom and in order to discover what it hides, man is required to

develop techniques of knowing the undiscovered resources. Some times the

discovery of the use of a resource can immediately increase its use value.

When we talk about the natural resources of a country, we have

obviously in mind the extent of the known or discovered natural resources with

their present uses. With the growth of the knowledge about the unknown

resources and their use, the natural endowment of a country will be materially

altered.

Another consideration regarding the nature of natural resources is that

some resources; e.g., land, water, fisheries and forests are renewable and there

are others like minerals and mineral oils which are exhaustible and can be used

only once. Consequently, careful use of the exhaustible resources and

maintenance of the quality of renewable resources like land are a sine qua non in

the process of development.


PRINCIPLES OF RESOURCE DEVELOPMENT

The principal objective of resource development is to maximize Gross Domestic

Output (GDP) and for this purpose there should be optimum utilization of

resources not only in the short period but, in a sustained manner, over the long

period. Various guiding principles for resource development are:





38




? Economic use of resources to achieve minimum waste
? Sustained use of economic resources through conservation of renewable

resources and economic use of exhaustible resources

? Multi-purpose use of resources: if a certain resource has a number of

uses, it is necessary to have all the uses

? Integrated planning in the use of natural resources
? Location of industries with a view to reducing transport costs to the

minimum

? Abundant supply of energy resources, specially electric power so as to

utilize other resources in the best possible manner



LAND RESOURCES



The total geographical area of India is about 329 million hectares of which 42

million hectares or 14% of the total reporting area in India is classified as:

? Barren land, such as mountains, deserts, etc. which cannot be brought

under cultivation and

? Area under non-agricultural uses, that is, lands occupied by buildings,

roads and railways, rivers and canals, and other lands put to uses other

than agricultural.

? The rest of the land is put under three major uses, viz., forests, pastures

and agriculture.

FOREST RESOURCES



Forests are important natural resources of India. They help control floods and

thus they protect the soil against erosion. They supply timber, fuel wood, fodder

and a wide range of non-wood products. They are the natural habitat for bio-





39



diversity and repository of genetic wealth. Forests, thus, play an important role

in environmental and economic sustainability. Under land utilization pattern, the

Government of India estimated the total area under forests as 68 million hectares

or 22 % of the total geographical area. In our country, forests have generally

been undervalued in economic and social terms.

The contribution of the forest sector to GDP was put as 1% in 1996 ? 97

(measured at 1980 ? 81 prices). A recent estimate puts the gross value of goods

and services provided by the forest sector at 2.4% GDP. There is concentration

of forests in a few states in Assam, Madhya Pradesh, Orissa and a few union

territories. Northern India is particularly deficient in forests. There is a need to

increase forest areas in the entire country as also to develop them in deficient

states.

Forest policy, 1952


Appreciating the necessity of developing forests, the government of

India declared its first forest policy in 1952. According to this policy, it was

decided to raise steadily the area under forests to 100 million hectares or 33 %

for the country as a whole. The target area was to provide green cover over two

thirds of the land area in the hills and mountains. The main objectives of forest

policy under the Five-Year Plans were:

? To increase the productivity of forests
? To link up forest-development with various forest-based industries and
? To develop forests as a support to rural economy.

New forest policy, 1988


The 1952 forest policy had failed to stop the serious depletion of forest

wealth over the years. Accordingly, it became imperative to evolve a new





40


strategy of forest conservation. The government of India announced its new

forest policy in December 1988. The important features of this policy are:

? Role of tribal in forests recognized


The new policy enunciates that all agencies responsible for forest

management, including forest development corporations should associate tribal

people closely in the protection, regeneration and development of forests.



?

Depletion of forest area and the target for green cover


The new policy reiterates that green cover should be extended to over two-thirds

of that land area in the hills and mountains and that the total forest area in the

country should be raised to 100 million hectares or 33 % of the total

geographical area in the country.

?

Discouragement to forest-based industries


The new forest policy states that no forest based enterprises except at the

village or cottage level will be set up in the future, unless it is first

cleared, after a careful study of the availability of raw materials.

?

End the system of private forest contractors


The new forest policy advocates an end to the system of contractors

working the forests. The contractors will be replaced by institutions such

as tribal cooperatives, government corporations, etc.

?

Forest land not to be diverted to non-forest uses



The forest department used to assign forestland to individuals or non-

government agencies for the purpose of reforestation.

?

Participatory Forest Management System





41



This new strategy involves rural people, particularly women and tribal

community who have intimate knowledge of plant species, their growth

characteristics, utility and medicinal value, etc. They also know the

specific requirements of fuel, fodder, timber and other non-food

products. The adoption of the new strategy has led to several positive

outcomes, such as:

? Change in the attitude and relationships of local communities

and forest officials towards each other and the forests

? Improvement in the condition of forests
? Reduction in encroachments
? Increase in the income of local people and
? Involvement of non-governmental organizations (NGOs) in

forest research, tree planting, promotion of productivity, etc.

WATER RESOURCES

India is one of the wettest countries of the world but it is not able

to hold all the water it receivers. Because of deforestation and

denudation, a large portion of the monsoon water disappears into the sea

as surface run-off. Community resources such as ponds, tanks and rivers

are misused and continuously neglected.

Rivers are increasingly getting polluted as urban and industrial

wastes are dumped into them. India's water policy has concentrated on

gigantic river systems and reservoirs and despite huge investments on

them, their productivity continues to be low. They have not helped in

controlling or moderating floods.

Nor are they cost effective, or ecologically desirable. Ground

water table has gone down dramatically in more intensely cropped areas,





42


clearly indicating the need to increase recharges or to regulate pumping.

In some areas, there is serious pollution danger to ground water due to

industrial wastes.

India continues to be highly flood-prone and drought?prone but

neither the government nor the Planning Commission has shown

sufficient imagination to appreciate the gravity of the situation and make

necessary correction to India's water policy.

FISHERIES

India is the sixth largest producer of fish in the world and perhaps,

second largest in inland fish production. Fisheries sector plays important

role in the socio-economic development of India, generating employment

for a large coastal population- about one million fishermen draw their

livelihood from fisheries, but they generally live on the verge of extreme

poverty. It is not only an important source of direct employment but

generates employment in downstream industries. It is estimated that

about six million people are employed in the fisheries sector.

Fisheries help in raising nutritional levels, augmenting food

supply and earning foreign exchange. The contribution of the fisheries

sector to Gross Domestic Product (at current prices) has increased from

Rs. 1,230 crores to Rs. 32,060 crores between 1980-1981 and 2001-2002.

Fisheries contribute about 1.21 % of India's GDP. Broadly, fishery

resources of India are either inland or marine. The principal rivers and

their tributaries, canals, ponds, lakes, reservoirs comprise the inland

fisheries. The five-year plans assign high priority to the development of

fisheries because of the necessity to raise the nutritional levels of protein

deficient Indian diet and to earn much needed foreign exchange.





43



The fisheries programmes have emphasized family- based Labour

intensive inland and brackish water fisheries and improving the

harvesting from seas by stimulating the growth of country boats,

mechanized boats and deep sea trawlers.


MINERAL RESOUCES



The development and management resources play a major role in the

industrial growth of a nation. Coal and iron, for instance, are the basic

minerals needed for the growth of iron and steel industry, which in turn,

is vitally necessary for the country's development. Similarly, there are

other minerals like mica and manganese, copper, lead and zinc, which

are of economic importance.

Then we have mineral fuels like petroleum, coal, thorium and

uranium, which are of national importance. Thorium and uranium the

atomic energy minerals promise to be tremendous source of power.

Besides these, we have a number of minor minerals with varying degrees

of utility to the country.

The reserves of India in respect of minerals essential for basic

industries Viz., coal and iron are ample. But there is a fairly long list of

vital minerals like copper, tin, lead, zinc, nickel, cobalt and sulphur and

most of all petroleum, in which India is deficient.

The Government of India amended the Mines and Minerals

(regulated and Development) Act, 1957 in January 1994 and announced a

new mineral policy:

? Throwing open the mining sector to the private sector

including direct foreign investment,





44


? Empowering the states to grant prospecting licenses/mines

leases without prior approval of the central Government

(except in a few cases)

? Removing the restrictions on equity holding by foreign

nationals in a mining company

The major objectives and the strategies of the new mineral policy

are as follows:

? to explore for identification of mineral wealth on land and off-

shore

? to develop mineral resources taking into account the national

and strategic considerations

? to minimize adverse effects of mineral development on the

forests, environment and ecology through appropriate

protective measures

? to promote foreign trade in minerals
? to promote research and development in minerals

ECONOMIC DEVELOPMENT AND ENVIRONMENTAL ISSUES

Ecologists and Environmentalists believe that one pf the principal reasons for

the existence of the environmental problem stems from the emphasis on the

growth by the industrialized nations. They point out that economic growth has

been made possible only at the expense of the environment.

Ecologists postulate that growth rates were so high, because of the

fantastic increase in population and demands of the society. Increased

production and consumption had unscrupulously released wastes and pollutants

into the environment without consideration of their effects.





45



Fast growth has resulted in the destruction of the environment, the

impairment in the quality of elemental environmental services, the deterioration

of air quality and the contamination of seas, rivers, lakes, etc. These were not

taken into account in economic calculations. The loss and deterioration of

important environmental goods went relatively unnoticed. In short, the social

costs of growth were not included in economic analyses.

Economists who analyze in a straight jacket always contend that

sustained economic growth increases human welfare. These economists base

their arguments on international companies in terms of the value of goods and

services produced in the economy. To put in shortly, they compare Gross

National Product (GNP) in terms of dollar value to assess the economic growth

of nations. Countries feel highly satisfied if their GNP graph shows an

ascending tendency, year after year and they proclaim that they are forward.


But, the measurement of economic growth in terms of output of goods

and services (GNP) is rather faulty. It takes into consideration the national

product only. It does not consider the national disproduct in the process of

production. Billions of dollars worth of cigarettes produced in he economy have

been brought under the calculation of GNP per year. It does not take into

consideration the external cost, the pollution it creates, the diseases it spreads in

the society among smokers and silent smokers. Theses are the disproducts of the

nation. Edward F. Denison considers that air and water pollution and also the

solid wastes generated in the process of production, as the real costs of

economic growth. He had suggested that value of the deterioration to

environment by these real costs should be deducted from NNP to contain a

better measure of output. In this context, Samuelson's NEW (Net Economic





46


Welfare) is worth considering as very appropriate, whereby the national

disproducts are deducted from the national product.

The role of environment and the need for maintaining the quality of the

environment have emerged recently as important issues and have assumed

greater importance in the context of several ecological disasters in many parts of

the globe in recent times.

Barry Commoner has analyzed the interaction of three major factors

influencing environmental impact. They are:

? Population factor
? Per capita availability of goods
? Pollution per unit of economic good.

The Environmental impact (EI) is given as follows












Economic good pollutant



EI = Population * *

Population economic good

This enables us to estimate the contributions of the three factors to the

environmental impact, viz., the size of the population, per capita production or

consumption; and the pollutant generated per unit of production or consumption.



Thus, environmental impact represents the environmental cost of a given

economic process. By the economic process, agencies external to the eco-

system are produced and which tend to degrade its capacity for self-adjustment.

According to Kenneth Boulding, " the world is finite and the resources

are scarce". Man out of greed exploits this earth, as if its resources are limitless,

to enrich himself in his pursuit of economic growth. If this is continued by man

who is too much enterprising, soon "we will have a plundered plant".







47



QUESTIONS:


1. What is business? How does business of today differ from that of earlier?

2. What are business objectives?



3. Explain business environment.



4. "Firms which systematically analyze and diognise the environment are

more effective than those which don't". Elucidate.



5. Sketch organizational arrangement for environment analysis. Give its

limitations.



6. Define corporate governance. Why is it assuming greater relevance now

a days?



7. Explain the factors influencing corporate governance.



8. Why is social responsibility important for business?



9. List out the arguments for and against social responsibility.



10. What are the practical problems that confront social action programmes?

How do you overcome them?



11. What do you understand by ethics? Why is ethics important for

business?



12. State and explain the sources of business ethics.



13. How is ethics managed in a business unit?



14. State the difficulties involved in ethical decision-making. Bring out the

guidelines, which help in ethical decision-making.



15. What is an economic system? What are the basic problems of an

economic system?



16. What are the features of a mixed economic system?





48


17. "The fundamental economic problem of an economy is the problem of

choice". Discuss.


18. Explain the role of government in solving problems arised out of

different economic systems.



19. Define privatization and trace the history of privatization.



20. Explain the different routes of making privatization.



21. Give your arguments for and against privatization.



22. "There is a need for exercising caution and restraint while privatizing

PSU's". Comment.



23. Bring out the nature and causes for globalization of business.



24. Explain the stages involved in the economic transition of globalization.



25. Evaluate the impact of globalization on Indian economy.



26. List out the strategies used for globalising a business.



27. Natural resources are the wealth of a country's economy. Discuss.



28. Explain the different kinds of natural wealth discovered and

undiscovered in India.



29. Evaluate our government policies towards management of natural

resources.



30. Appraise the impact of economic development on various kinds of

environmental issues.





49



UNIT I I



Lesson 1



INFRASTRUCTURE OF THE ECONOMY


INFRASTRUCTURE


Adequate quantity, quality and reliability of infrastructure are key

to the growth of any economy. Infrastructure facilities ? often referred to

as economic and social overheads ? consists of:

? Irrigation, including flood control and command area development
? Energy: coal, electricity, oil and non-conventional sources
? Transport: Railways, Roads, Shipping and Civil Aviation
? Communications:
Posts and Telegraphs, Telephones, Telecommunications, etc

? Banking, Finance, and Insurance
? Science and Technology
? Social overheads: health and hygiene and education.

ENERGY

Energy is the most important determinant of a country's economic

growth. In fact, per capita consumption of energy is taken as an indicator

of a country's prosperity. Energy is created through several sources. The

sources are conventional and non-conventional. The first shall include

commercial and non- commercial sources of energy.

Commercial energy is so-called as it commands a price and the

user are expected to pay it for its use. Non-commercial energy

commands no price and the user can take it as a free good gifted by





50


mature. Non ? conventional energy is a recent discovery and its use is

confined to limited pockets in our country.

Confining to the commercial energy, it may be stated that Coal is

the main source, accounting for 67 % of the total energy consumed in the

country. The Government has initiated several steps to improve supply

of coal. Private sector participation is allowed in coal mining. Imports of

cooking coal under the Open General License (OGL) are being allowed

and the import tariff has been slashed from 85% to 35 %.

Power has been a bugbear of our economy. Lack of sufficient

power supply has checked the growth of industries all over the country.

The government has announced a package of incentives to attract private

investments. The package includes the reduction of import duties on

power equipment to 20%; a five-year tax holiday for new power projects;

a guaranteed 16% rate of return on paid up and subscribed capital; and

the provision of counter guarantee by the central government.

As part of the ongoing economic reforms, the government has

allowed imports and distribution of certain petroleum products like

domestic LPG and kerosene by the private sector at market prices to

promote new investments and to improve operational efficiency. The

ONGC has already disinvested 2% of its equity and proposes to offload

18 % more in domestic and foreign markets.

Private and foreign companies are now allowed to invest in oil

exploration and production in joint- venture with ONGC or OIL, (ONGC

has already tied up with Reliance and Enron) and also in refining of

petroleum products. The domestic market in lubricants has been opened

up to foreign collaborations.





51



STRENGTHS, WEAKNESS AND REMEDIES OF POWER

Strengths

? Elaborate organizational framework for the growth of electricity

has been provided by the Electricity (supply) Act, 1948

? Power and responsibilities nearly divided between center and

states. Former confines itself to planning, co-ordination and

regulation. Latter looks after generation and distribution.

? Vast network of generation, transmission and distribution

facilities spanning the length and breadth of the country.

? Joint venture among states in power generation
? Numerous amendments to permit private participation in power

generation

Weaknesses

? Very low plant load factors
? Declining share of hydro ? power
? Too much subsidy burden on state electricity boards
? Incompetent and corrupt electricity boards
? Frequent and heavy load ? shedding
? Capital intensive but starved of funds
? Heavy losses during transmission and distribution

Remedies

? Formulate unambiguous guidelines for private sector investment

and ensure speedy clearance





52


? Expedite formulation of guidelines for private participation in

transmission and distribution

? Create autonomous regulatory authorities at the central and state

levels.

? Corporatise SEBs, with separate generation, transmission, and

distribution segments

? Set cost-based pricing for each consumer group, building in per-

determined tariff increases

TRANSPORT

Transport sector includes railways, roads, shipping and civil aviation.

The Indian Railways have a long history. They consist of an extensive

network spread over 62,462 kms- comprising board gauge (36,824 kms),

meter gauge (20,653kms) and narrow gauge (3,985kms). Electrified

networks with 11,793 kms account for 18.8 % of the total route

kilometerage.

The thrust areas identified for the eight-plan period include

replacement and renewal of averaged assets; argumentation of terminal

and rolling stock capacities, gauge conversion and electrification.

Railways can claim foe having connected most of the country with the

conversion of gauges and creating more routes.

The last few years have been particularly good for railways

because of the addition of more than 500 new trains, which include the

deluxe trains like Rajdhanis and Shatabdis. A little known distinction of

the railways is their achievements abroad. Among the PSUs of the

railway ministry are the Rail India Technical and Economic Services Ltd





53



(RITES) and the Indian Railway Construction Company Ltd (IRCON).

RITES consultancy expertise is internationally recognized.

It has completed important assignments in railway systems in

Africa, the Middle East, Vietnam and Nepal. IRCON too has undertaken

construction projects in Turkey, Saudi Arabia, Malaysia, Indonesia and

Bangladesh. Another feather in the cap of the railways is the 760 km

long Konkan railway.

STRENGTHS, WEAKNESS AND REMEDIES OF RAILWAYS

Strengths


? Historical advantage ?85% of track being inherited from the

British

? Largest in Asia and fourth largest in the world
? Substantial Electrified tracks
? Competitive advantage in project consultancy and construction
? Agenda of national integration

Weakness

? Ever increasing traffic load
? Inadequate finance
? Low productivity
? Low speed of goods as well as passenger trains
? Poor service to the passengers
? Absence of suitable transportation policy
? Too many social objectives

Remedies

? Corporatise with detailed terms of reference approved by the

parliament





54


? Unbundle disparate operations like transportation of freight and

passengers and equipment-manufacture

? Corporatise all manufacturing units and privatize them gradually
? Commercialize passenger services by abolishing all free travel,

and privatize ticket-checking

? Phase out cross ?subsidization of passenger fares, through freight

charge, so as to reflect real costs

? Make commercial use of railway property by selling or leasing it,

to the private sector

ROAD TRANSPORT

In order to improve the road transport system, the government

announced several measures. Private participation has been allowed in

the construction and maintenance of roads. In addition, road transport

has been declared as an industry, which enables it to borrow finance

from financial institutions. National Highway Act is to be amended so as

to enable the levy of a toll on road users.

MRTP Act is also to be amended to enable large firms to enter the

road transport sector. The Road Development Plan for 1981 ? 2001

envisages the construction of 2212000 kms of rural roads. But viewing

against the backdrop of the resource crunch, this plan appeared to be

unimplementable.

STRENGTHS, WEAKNESS AND REMEDIES OF ROAD
TRANSPORT
Strength

? One of the worlds largest, stretching for almost 201 million across

the country





55



? Relatively low vehicle density per km.

? Ease the burden o railways


Problems


? Only 1.6% of road strength is occupied by national highways,

5.86% by state highways and 92.54%by district and village roads.

Except the national highways, the condition of other roads is

pathetic.

? Several missing links, unbridged river crossings, weak culverts

and inadequate road pavement enroute.

? Remote parts of the country are still not connected
? Veritable death traps
? Lack of adequate finance
? Increasing pollution

Remedies

? Allocate additional resources for upgrading and widening existing

national and state highways.

? Create a highway development fund as an extra-budgetary

development fund for funding highways

? Set up a financing mechanism for funding road construction,

using the toll system for cost recovery

? Encourage private sector participation in highways by

institutionalizing build-operate ?transfer schemes.

? Earmark a proportion of the state's levies on vehicle and fuels for

road maintenance.





56


? Amend the loans to allow for Right of Way in land acquisition for

laying roads.

SEA TRANSPORT

The government has recently approved a scheme, which envisages

voluntary cargo support of the shippers to Indian shipping lines, up to

40% of the value of linear cargo transacted in the foreign trade in a

phased manner. To reap the benefits of the scheme, SCI has beefed up its

customer services cell to attend to the requirements of shippers on a

priority basis.

Steps have been initiated by the government to frame guidelines

for Indian shipping companies as per the International Safety

Management (ISM) code, which was adopted by the International

Maritime Organization (IMO) in November 1993. Under the ISM code,

which will be applicable to passenger ships and tankers by July 1998 and

for other vessels by July 2002, shipping companies are required to

provide special training to on shore staff and the crew on board. There

are eleven major ports and 139 operable minor ports located along the

5560 km long coastline of the country.

The phenomenal growth of our merchant navy from a modest base

of 0.2m GRT in 1947 to 6.3 m GRT has placed our country 17th among

the maritime nations of the world. Today, our shipping industry can

boast of a modern versatile and technically superior fleet with an average

of 13 years as against the world average of 17 years and is well equipped

to compete in the international markets.







57



STRENGTHS, WEAKNESS AND REMEDIES OF SHIPPING

Strengths

? Long coastline of over 5700 kms and almost the whole of foreign

trade passing across the seas.

? Largest merchants shipping fleet among the developing countries

and 14th in the world in shipping tonnage

? Skilled and competent managerial and ship board personnel
? Huge potential in the make of India becoming one of the

signatories of the WTO. There will be considerable increase in

sea-borne trade.

Weaknesses

? Limited cargo handling capacities of ports
? Challenge from containerization which is highly prevalent in

advanced countries

? Fund starving
? Undue hardships to ship owners due to conversion of FOB items

into CIF, which has been introduced because of decanalisation.

Remedies

? Amend the Major Port Trust Act, 1963, to allow private sector

BOT projects at the 11 major ports

? Raise the capital expenditure ceiling of the port trust boards from

Rs.5 crore to Rs.200Crore.

? Abolish the need for PIB approvals for private projects that do not

need port trust investment





58


? Unbundle activities like cargo handling and warehousing into

profit centers.

? Allow port-based businesses to create captive facilities for

themselves under the BOT system

? Initiate restraining programmes to reduce labour resistance to

private sector participation.


CIVIL AVIATION

Civil Aviation has three functional sub sectors; operational, infrastructural and

regulatory ?cum- developmental. On the operational side, Indian Airlines

Limited, Vayudoot (which functions as a separate identifiable division of Indian

Airlines Limited) and private airlines (scheduled and non ?scheduled) provide

domestic air services. Air India limited and Indian Airlines Limited are domestic

airlines, which provide international air services. Pawan Hans limited provides

helicopter support services, primarily to the petroleum sector.


Infrastructural facilities are provided by the International Airports

Authority of India (IAAI) and the National Airports Authority (NAA). These

two authorities are being merged to form a single authority viz. Airports

Authority of India as a result of the enactment of the Airports Authority of India

Act, 1994. The regulatory and developmental functions are looked after by the

Ministry of Civil Aviation and the offices of the Directorate General of Civil

Aviation. The Air Corporation Act, 1953, was repealed on March 1, 1994,

ending the monopoly of Indian Airlines, Air India and Vayudoot over scheduled

air transport services. Six private operators, who were hitherto operating as air

taxis, have since been granted scheduled airlines status.





59



Indian Airlines has also geared itself since June 1993 to the challenging

task of adopting itself to a competitive environment. Several measures have

been taken, mainly centred on making the organization adopt a marketing

approach to decision-making and considerably improve the quality of its

product. It has improved its passenger facilities both on board and on the

ground, on time performance, flight safety measures and has also increased

employee participation to provide better services.


COMMUNICATIONS

The communication system comprises posts and telegraphs, telecommunication

systems, broadcasting, television and information services. By providing

necessary information about the markets and also supplying necessary

motivation, the communication system helps to bring buyers and sellers together

effectively and helps to accelerate the growth of the economy. Accordingly, the

modern communication system has become an integral part of the development

process.


Postal system in India

Since 1950-51, the postal network has been expanded throughout the country,

and in recent years, wit special emphasis on the rural, hilly and remote tribal

areas. The postal department has given a new thrust to its programme of

modernization for providing new value added services to customers. This

include:

? A programme of computerized services of such postal operations as mail

processing, savings bank and material management

? Introduction of Metro channel Service linking 6 metros





60


? Introduction of Raidhani channel linking Delhi with most of the state

Capitals and

? A business channel with exclusive treatment to pin coded business mail



In recent years, there has been healthy growth in many lines of postal

activity, such as speed post traffic, postal life insurance, extensive of postal life

insurance and post office savings banks to rural areas, etc.

Indian telegraphs

Indian Telegraph is one of the oldest government ?owned public utility

organizations in the world. The number of telegraph offices has increased from

8,200 in 1951 to over 30,000 now. The phonogram service for sending and

receiving telegram by telephone, telex service to send and receive printed

message directly from one centre to another, the tremendous expansion of

telephone facilities and direct trunk dialing ? all these facilities are available to

the general public.

Telecommunications

Telecommunication is a vital input for global competition and for India's

success in the international markets. It is important not only because of its role

in bringing the benefits of communication to every corner of India but also in

serving the new policy objectives of improving the global competitiveness of the

Indian economy and stimulating and attracting foreign direct investment. There

has been phenomenal growth in the telecommunication sector after 1995.

There has been a shift in importance towards the private sector and

towards wireless telephony with falling tariff rates for cellular phones, there has

also been a phenomenal increase in the number of cellular subscribers. Cellular





61



telephony has become the most preferred mode of communication among the

Indian public.

STRENGTHS, WEAKNESS AND REMEDIES OF

TELECOMMUNICATION

Strength


? Huge potential for expansion
? Rapid growth in the last couple of years with annual growth of 13 %

between 1984 and 1994 and 20 % thereafter.

? Relatively high density with 7.97 phones per 100 towns people ahead of

China and Indonesia

? High technology ? 66 % of exchanges are digital

Weaknesses


? Waiting period to get new connections
? Poor maintenance 218 faults for 100 lines every year
? Privatization efforts not successful

Remedies


? Accelerate the clearance process for private sector entry into basic

telecom services

? Offer incentives to private telecom companies for meeting connection

and low-fault targets

? Resolve disputes between private operators and the DOT over long

distance connections immediately

? Convert the DoT into a holding corporation, with its subsidiaries

operating services in different circles





62


? Replace the Indian Telegraph Act, 1885 with a new act incorporating the

impact of technology changes.

RECENT DEVELOPMENTS IN TELECOM SECTOR


? Large number of villages are now covered through Wireless in Local

Loop (WLL)

? The national internet backbone (NIB) was commissioned
? Since long distance (National and international) has been opened up to

competition, long distance tariffs have come down.

? To enhance telecom services in rural and remote areas, the Telecom

Department has issued guidelines for implementing Universal Service

Obligation (USO)

? According to the new telecom policy every village in India is expected to

be provided with one public telephone.


EDUCATION, SCIENCE AND TECHNOLOGY

Science and Technology are ideas and the means with which man seeks to

change his environment. While Science represents " accumulation of

knowledge", Technology represents " refinement in tools". Over last two

hundred years or so, science and technology have helped to improve the quality

of human life. For rapid economic progress, the application of science and

technology (S and T) to agriculture, industry, transports and to all other

economic and non-economic activities has become essential.

Jawaharlal Nehru believed in the spread of science of scientific temper.

He was responsible for the setting up of a chain of national laboratories devoted

to basic and applied research, develop indigenous technology and processes and

help industrial enterprises in solving their technological problems. The Council





63



of Scientific and Industrial Research (CSIR) as well as the Department of

Atomic energy was set up. The Indian Council of Agricultural Research (ICAR)

was strengthened. Then came the Department of Space technology, The Indian

Space Research Organization (ISRO) etc., in 1958 the science Policy Resolution

was adopted to provide positive incentives for the development and utilization

of S and T in nation building activities. The major aims of this policy were:

? To foster, promote and sustain by appropriate means the cultivation in

science and scientific research in all its aspects ?pure, applied and

educational

? To ensure an adequate supply within the country of research scientists of

higher quality and recognize their work as an important component of

the strength of the nation

? To encourage and initiate with all possible speed programmes for

training of scientific and technical personnel on a scale adequate to fulfill

the country's needs in regard to scientific and education, agriculture,

industry and defence

? To ensure for the people of the country all the benefits that can accrue

from the acquisition and application of scientific knowledge.

The Indian government has been giving special support to S and T since

Independence and the large network of national laboratories and universities

have been training a strong cadre of scientists, engineers, technologists, etc.

Public and private sector organizations have established over 600 inhouse

Research and Development (R&D) laboratories to meet their internal

technological requirements. The rapid growth of engineering consultancy

organizations to provide design and consultancy services and act, as the bridge

between research institutions and industry is really commendable. India's stock





64


of technical manpower has been growing at the rate of about 9 percent per year

for the last 20 years and is now estimated to be about 2.5 million. After USA,

India today ranks second in the world as regards qualified science and

technology manpower.

Science and technology (S&T) has made a phenomenal impact the world

over in shaping the lifestyle of the common man. If India has to really forge

ahead in the coming decade, S&T must play a pivotal role in all the important

tasks that lie ahead of us. Hence, the deployment of S&T as an effective

instrument of growth and change becomes an imperative strategy. In order to

derive maximum output from meager resources, S&T and the associated

methodology must be brought into the main theme of economic planning in the

agricultural, industrial and services sectors.

MEASURES TO PROMOTE S & T


Following are the measures necessary to promote S & T:


Education for the knowledge economy

Producing knowledge intensive, technologically sophisticated, higher value

goods and services are not possible without a trained management cadre and

labour force with the appropriate mix of technical and vocational skills. Among

other things, this requires

? Scientists with the skills needed to conduct appropriate R&D
? Engineers and skilled craftsmen to evaluate technology and adopt it for

use in the enterprise,

? Skilled technicians who will actually utilize the technology in the

production process





65



Vocational, secondary and tertiary education must all contribute to

turning out graduates with the necessary skills. Moreover, since the skills

required by today's labour market may not be the same as those that will be

required in the future, a process of life long learning must be built into the

education system. And at all levels and life-cycle stages, the education system

must work with the private sector to understand and respond to its needs.

Technology acquisition and diffusion (using existing knowledge to improve
the competitiveness)
Most of the knowledge that developing countries need to boost productivity and

value added, in both high tech and traditional sectors has already been invented.

The problem is that this existing knowledge is not always being employed in

World Bank client countries. Therefore, a third, related aspect of capacity

building involves enhancing the private sector's ability existing technology,

improve and develop it for particular needs of local enterprises and incorporate

it into local production processes. In other words, this aspect of capacity

building would focus on helping the private sector absorb and utilize better

technology that is already in use elsewhere in the world.

Science & Technology Policy Making Capacity

National policy makers need to have the capacity to understand the challenges

and opportunities flowing from the global economy and to devise appropriate

policies. Meeting these challenges will require concerted action by education

institutions, R&D institutes, the private sector and the national government. It

will also require close links and co-operation between each of these actors.










66


SCIENCE AND TECHNOLOGY MANPOWER DEVELOPMENT
AND EMPLOYMENT

While a number of steps have been taken by the government to increase

employment opportunities the number of scientists would fall far short of the

rate at which S&T persons are needed in the country. Some of the strategies for

the creation of jobs and for retaining S&T personnel are:

? Motivating S&T personnel to capture the full potential of self-

employment

? Creating awareness about entrepreneurship leading to self-

employment among the college and school students

? Introducing greater capital investment in the areas where the outlay

per work place is minimal

? Restructuring government policies to minimize import of goods

? Creating entrepreneurship development cells in all Science

/Engineering/IITs and other academic institutions by the concerned
central /state agencies

? Introducing automated techniques selectively from the viewpoint of

safety, reduction of drudgery, improvements in productivity
/efficiency etc

? Examining export strategy to enable the country to pay for imports

through exports and thereby simultaneously generating greater
employment

? Encouraging the establishment of sophisticated industries in the

emerging areas of technology as also encouraging the service sectors
requiring inputs from high technology so that highly trained S&T
personnel could be retained and gainfully employed

? Maintaining centers of excellence in various branches of Science and

Technology to retain highly trained persons within the country

? Providing proper working atmosphere and adequate amenities (e.g.

housing in urban areas) to S&T personnel







67



Lesson 2



DEMOGRAPHIC ISSUES AND HUMAN DEVELOPMENT



STUDY OF HUMAN RESOURCE

The study of human resource is vital from the point of view of economic

welfare. It is particularly important because human beings are not only

instruments of production but also ends in themselves. It is necessary to know in

quantitative terms the number of people living in a country at a particular time,

the rate at which they are growing and the composition and distribution of

population.

THE THEORY OF DEMOGRAPHIC TRANSITION

The theory of "demographic transition" postulates a three-stage sequence of

birth and death rate as typically associated with economic development.



First stage of Demographic transition: According to this theory death rates are

high in the first stage of an agrarian economy an account of poor diets,

primitive sanitation and absence of effective medical aid.



Second stage of Demographic Transition: Rise in income levels enables the

people to improve their diet. Economic development also brings about all round

improvement including the improvement in transport, which makes the supply

of food regular. All these factor tend to reduce death rate. Thus in the second

stage, birth rate remains high but death rate begins to decline rapidly. This

accelerates the growth of population. High birth rate and falling death rate

contribute to the growth of the average size of the family in the second stage.







68


Third stage of Demographic Transition: With the growth of industrialization,

population tends to shift away from rural areas towards industrial and

commercial centers. One of the features of economic development is typically

increasing urbanization, and children are usually more of a burden and less of an

asset in an urban setting than in a rural." The consciousness to maintain

reasonable standard of living tends to reduce the size of family in an

industrialized economy; since the death rate is already low, this is possible only

if birth rate falls. Thus, the characteristics of the third stage are low birth rate,

low death rate, small family size and low growth rate of population.

These three stages reveal the transformation of a primitive high birth and

high death rate economy into a low birth and low death rate economy. When an

economy shifts from the first stage to the second stage of demographic

transition, an imbalance is created in the economy as a result of falling death

rate but relatively stable birth rate. The second stage of demographic evolution

has, therefore, been termed as the stage of population explosion. This stage is

the most hazardous period for a developing economy. The decline in death rate

in the second stage, therefore creates an imbalance, which requires a period of

transition for adjustment. Thus, the theory is termed as the theory of

demographic transition. During the period of transition the demographic factors

get out of harmony. A new constellation of demographic forces is brought about

which changes the character of society; birth and death rate becomes balanced at

a lower level as a result of which growth rate of population also declines.

SIZE AND GROWTH RATE OF POPULATION IN INDIA

India today possesses about 2.4 percent of the total land area of the world but

she has to support about 17 percent of the world population. At the beginning of





69



this century India's population was 236 million and according to 2001 census,

the population of India is 1,027 million.

A study of growth rate of India's population falls into four phases:

1891-1921: stagnant population

1921-1951: steady growth

1951-1981: rapid high growth

1981-2001: high growth with definite signs of slowing down

During the first phase of 30 years (1891-1921), the population of India grew

from 236 million in 1891 to 251 million in 1921 i.e., just by 15 million.


GROWTH OF POPULATION IN INDIA (1901-2001)



Censes

Population

Compound annual

period

(in millions)

growth rate

1891-1921

251

0.19

1921-1951

361

1.22

1951-1981

683

2.15

1984-1991

844

2.11

1991-2001

1027

1.93

Source: Census of India 2001, Series 1, Paper 1 of 2001, Provisional Population Totals.

During the second phase of 30 years (1921 to 1951) the

population of India grew from 251 million in 1921 to 361 million in

1951 i.e. by 110 million. During the third phase of 30 years (1951-1981),

the population of India grew from 361 million in 1951 to 683 million in

1981. In other words, there was a record growth of population by 332

million in a period of 30 years. During 1981to 2001, India entered the

fourth phase of high population growth with definite signs of slowing

down. Total population increased from 683 million in 1981 to 1,027

million in 2001 indicating an increase of 50.4 % during the 20 years

period.





70


However, the second decade (1991-2001) of this phase registered

a decline (1.93%) in the annual average rate of growth. This is a

welcome trend, which should be strengthened.

HUMAN DEVELOPMENT IN INDIA

MEASURES OF HUMAN DEVELOPMENT

Economic growth contributes most to poverty reduction when it expands

the employment, productivity and wages of poor people and when public

resources are channeled to promoting human development. A virtuous

cycle of economic growth and human development arises when growth is

labour using and employment generating and when human skills and

health improve rapidly.

Income clearly is only one option that people would like to have,

though an important one. But it is not the sum total of their lives. Income

is also a means, with human development the end. Ever since the

publication of the Human Development Report 1990, efforts have been

made to devise and further refine measures of human developments.

Three measures have been developed. They are Human Development

Index (HDI), Gender related Development Index (GDI) and Human

Poverty Index (HPI).



Comparison of Human Development Indices (2002) Some

selected countries





Human Development (HDI)

Gender related

Human Poverty Index

Income Poverty line US $ I a day

Development

(HPI)

1993 PPP 1990 ? 2002

Index (GDI)

High Human Development

1 Norway

0.956

0.955

7.1

4.3*

4 Canada

0.943

0.941

12.2

7.4*

8 United

states

0.939

0.936

15.8

13.6*

9 Japan

0.938

0.932

11.1

...

12 United

0.936 0.934 14.8

15.7*

Kingdom



71

28 South

Korea

0.888

0.882

...

<2.0

53 Mexico

0.802

0.792

9.1

9.9

Medium Human Development

57 Russian

Fed

0.795

0.794

...

...

59 Malaysia

0.793

0.786

10.9

<2

68 Venezuela

0.778

0.770

8.5

15.0

72 Brazil

0.775

0.768

11.5

8.2

77 Saudi

Arabia

0.768

0.739

15.8

...

83 Philippine

0.753

0.751

15.0

14.6

94 China

0.745

0.741

13.2

16.6

96 Sri

Lanka

0.741

0.738

18.2

6.6

101 Iran

0.732

0.713

16.4

<2

111 Indonesia

0.692

0.685

17.8

7.5

112 Vietnam

0.961

0.689

20.0

17.7

120 Egypt

0.953

0.634

30.9

3.1

127 India

0.595

0.572

31.4

34.7

138 Banglades

0.509

0.499

42.2

36.0

Low Human Development

142 Pakistan

0.497

0.471

41.9

13.4

151 Nigeria

0.466

0.458

35.1

70.2

176 Niger

0.292

0.278

61.4

61.4


*for 1994 ?95 using $ 11 a day (1994 PPP US $)
Note: Countries have been arranged in the descending order on the basis of HDI
Source: Compiled from UNDP, Human Development Report 2004.

Human Development Index

HDI measures the average achievement in three basic dimensions of

human development:

? A long and healthy life as measured by life expectancy at birth
? Knowledge as measured by the adult literacy rate (with two third

weight) and the combined primary, secondary and tertiary gross

enrolment ratio (with one third weight)

? A decent standard of living as measured by GDP per capita (PPP

US $)

Before calculating HDI, an index for each of the three dimensions is

created.

The HDI is calculated as a simple average of the dimension

indices. The table indicates Human Development Index for 2002 for



72
selected countries as reported in HDR 2004. Countries have been

grouped under three categories:

? Countries in the HDI range 0.8 and above are in the High Human

Development group

? Countries in the HDI range 0.5 to 0.8 are in the range of Medium

Human Development group

? Countries in the HDI range less than 0.5 are in the Low Human

Development group

The data has been collected for 177 countries. Among them 55

countries were in the High Human Development range, 86 countries were

in Medium Human Development range and 36 countries were in Low

Human Development range. India, which was at No.138 in HDI in 1994,

has improved its position to No.127 in 2002.

Gender Related Development Index (GDI)

While HDI measures average achievement, the GDI adjusts the average

achievement to reflect the inequalities between men and women. The three

components used for the purpose are:

? Female life expectancy
? Female adult literacy and gross enrolment ratio

? Female per capita income

If gender inequalities were not penalized, the value of GDI and HDI

would be the same, but if gender inequalities exists, the value of GDI would be

lower than that of HDI. The greater the difference between HDI and GDI, the

greater is the gender inequality.

From the table (refer GDI column) it may be noted that near gender

equality exists in Norway, Canada, United States, United Kingdom, Japan,

Mexico, Russian Federation, Malaysia, Venezuela, Philippines, Sri Lanka,



73

China, Vietnam and Indonesia. Countries s which indicate higher gender

inequality are Saudi Arabia, Pakistan, Iran , India , Egypt and Nigeria.


HUMAN POVERTY INDEX (HPI)

Human Development Report 1997 introduced the concept of Human Poverty

Index, which concentrates on deprivation in three essential elements of human

life already reflected in HDI- longevity, knowledge and a decent living standard.

The first deprivation is vulnerability to death at a relatively early age and is

represented in the HPI by the percentage of people expected to die before age

40. The second deprivation is related to knowledge and is measured by the

percentage of adults who are illiterate. The third deprivation relates to a decent

standard of living, in particular, overall provisioning. This is represented by a

composite of three variables ? the percentage of people of people with access to:

? Health services
? To safe water
? The percentage of malnourished children under five.

It may be noted that in the case of Nigeria, 70.2 % of the population

suffers from income poverty, but HPI index is 35.1 %. However, in the case of

Bangladesh, the situation is totally reversed ? HPI 42.2, but income poor

population is 36 %. In case of India, proportion of population below

international income poverty line is 34.7 %, but human poverty Index is 31.4.

UNITED NATIONS MILLENNIUM DECLARATION
FOR 2015



To promote HDI:

? To halve the proportion of the world's people living on less than $1 a

day

? To halve the proportion of the world's people suffering from hunger



74
? To halve the proportion of the world's people without access to safe

drinking water

? To achieve universal completion of primary schooling
? To achieve gender equality in access to education
? To reduce maternal mortality ratios by three quarters
? To reduce under-five mortality rates by two thirds
? To halt and begin to reverse the spread of HIV/AIDS, malaria and other

major diseases.

HUMAN DVELOPMENT INDEX FOR VARIUOS STATES IN INDIA

Major state ? wise Human Development in India (HDI)



Rank

State

Value of HDI

1 Kerala

62.78(1)

2 Maharashtra

55.49(2)

3 Punjab

54.86(3)

4 Tamil

Nadu

51.11(4)

5 Haryana

50.56(5)

6 Gujarat

47.82(6)

7 Karnataka

46.83(7)

8 West

Bengal

45.37(8)

9 Andhra

Pradesh

41.28(9)

10 Assam

39.48(10)

11 Madhya

Pradesh

36.71(11)

12 Orissa

37.25(12)

13 Rajasthan

37.11(13)

14 Uttar

Pradesh

35.51(14)

15 Bihar

34.05(15)

Note: 1. States have been arranged on the basis of UNFPA studying the descending order of HDI
2. Figures in brackets indicate respective statewise ranks

Source: UNFPA, India: Towards Population and Development Goals, OUP, 1997


Many of India's states can be compared with medium-size countries. It

would, therefore, be appropriate to construct Human Development Index (HDI)

for various states so as to understand the difference in HDI among them. The

UNFPA published a report on Human Developments in India in a book entitled

" India; Towards Population and Development Goals" in 1997. The range of

HDI values in UNFPA study varies from 62.8 for the top most Kerala to 34 for



75

Bihar. In this study, the variation is from 59.7 in case of Kerala to 34.1 for

Madhya Pradesh.

PROGRESS OF HUMAN DEVELOPMENT IN INDIA

The basic purpose of planning in India is to widen people's choices and improve

the well being of the people. In this context, human development was the key

issue so that people could lead a long and healthy life, they could acquire

knowledge so as to have a better vertical mobility in life and last, but not the

least, to achieve a decent standard of living of all. It would be, therefore,

appropriate to examine the progress of human development in India.

India has been categorized by the Human Development Report 2001 as a

medium human development country. The human Development Index has risen

gradually from 0.406 in 1975 to 0.510 in 1990 and stands at 0.590 in 2001. In

fact, it can take quite long for India to cross the mark of 0.8 in HDI to join the

rank of high HDI countries.

A major impediment to progress in human development is the very fast

growth of population experienced in India. India's population increases from

620.7 million in 1975 to 1,033 million in 2001 giving a growth rate of 20 % per

annum during the period (1975-2001), which is fairly high. It is expected that

the growth rate of population during 2000-2015 will come down to 1.3 %. This

would provide a welcome relief to push forward the process of human

development. Urbanization is considered to be a factor, which promotes human

development.

The share of urban population, which was 21.3 % in 1975, has reached a

level of 27.8 %in 2001,but by 2015, urban population would reach the level of

32.2 %. This would certainly help to enlarge human development because it has

been observed that urban areas are better looked after in terms of education and



76
health facilities. Another healthy feature of likely demographic transition is the

proportion of children or population under age 15, whose proportion stood at

33.7 % in 2001 but likely to decline to 27.7 % by 2015.

This will imply decreasing population pressures far below in future

which would also help in releasing resources to improve human development. It

would be quite useful to consider factors related with the education of the

population that art likely to promote human development. The most important

factor is adult literacy rate, which was 58 % in 2001. The share of India in the

world's illiterate population is 33.3 % .The information technology revolution

has been necessitated an increase in proportion of tertiary students in science,

math and engineering to be steeped up. Their proportion was only 25% during

1994-97 in India. India has to bring about a shift to meet the challenging

demands of the new economy.



77

Lesson 3



GLOBAL TRENDS IN BUSINESS AND MANAGEMENT



INTERNATIONAL RELATIONS


In modern times no state can afford to live in isolation. It has to cultivate

relations with others states of the world out of sheer necessity. Just as no

individual can live outside the society similarly no state can live outside the

international community. Therefore, international relationship is as much a

product of necessity as social existence itself. With the industrial revolution the

world shrank and the distances were reduced.

As a result the regional and local problems began to assume world

character. With this regional ? relations were transformed into international

relations. The term international relations has been interpreted and defined in

two senses- Narrow and Broad. In the narrow sense it is confined to the study of

" Official relations conducted by authorized leaders of the state".

By emphasizing official relations, the relations between businessmen,

scientists, etc., of the various countries are excluded from the scope of

international relations. In the broader sense international relations include " all

intercourse among states and all movements of people, goods and ideas across

national frontiers".


TYPES OF RELATIONS


Usually two types of relations exist between states ? cooperative and

oppositional.


? Cooperative relations - They are usually non-political and involve no

power.



78
? Oppositional relations The oppositional relations imply conflict among

groups and demand use of power.

International relations include study of both. At initial stages

international relations studied only diplomatic history as conditioned by the

happening of the past, but soon even to study of international law was included

in its scope.

With establishment of the League of Nations, the study of international

institutions was also included in its fold. Thus after World War I it came to

study the diplomatic history, international law and the league organization.

After World War II, its field was further widened and study of military

science and regional areas was also included in it. The psychological study

through personality and background analysis also gained prominence. Thus at

present international relations have become very extensive.


INTERNATIONAL RELATIONS APPROACHES

Broadly speaking there are two approaches for the study of international

relations.

? The classical approach considers the substance more important
? Scientific approach attaches more importance to method and technique.


TYPES OF CLASSICAL APPROACH


The prominent amongst the classical approach are



? Historical approach

Under it diplomacy and interrelations of a particular period are

studied. This approach is not possible in modern world, though it had the



79

advantage of giving the students a deep understanding of the problems in

their correct prescriptive.

? International organization approach

It studies the behavior of various states in the international organization

to determine the attitude of a particular power. This theory does not take

into account the activities of a state outside the international

organization.



? International law approach

It considers the international law as the key to the interpretation of

international relations. This approach however ignored the internal

politics as a factor in determining the attitude of a power in the

international sphere.

TYPES OF SCIENTIFIC APPROACH

The prominent scientific or modern approaches are


? Behavior approach is based on psychology and tries to analyze

international relations as strife between various national characters.

? Karl detsch developed Quantitative theory and developed certain

measurable indices of community development.

? Decision-making approach of Richar C. Synder emphasized the need of

probing the minds of the decision makers. While probing their minds

both internal and external settings were to be taken into account.

? The systems theory developed by Kapalan holds that a theory of

international politics normally cannot predict individual actions because

the interaction problem is very complex.



80
? Equilibrium theory of International relations and institutions was

developed by Liska. He holds that the states seek to secure the

best attainable position of equilibrium, and this is desirable.

? Power approach or realist theory It tries to understand international

relations in term of state interests and holds that the statesmen are guided

by interests rather than ideology, or motives.

MULTINATIONAL CORPORATIONS

The dynamics of the business environment fostered by the drastic political

changes in the erstwhile communist and socialist countries and the economic

liberalization across the world has enormously expanded the opportunities for

the multinational corporations, also known by such names as international

corporation, transnational corporation, global corporation (or firm, company

or enterprise) etc.

The rapidity with which the MNC's are growing is indicated by the fact

that while according to the World Investment Report 1997 there were about

45000 MNC's with some 280000 affiliates. According to the World Investment

Report 2001 there were over 63,000 of them with about 822,000 affiliates.

Only less than 12 % of these affiliates were in the developed countries.

China was host to about 3.64 lakh of the affiliates (i.e., more than 44% of the

total) compared to more than 1400 in India. The MNC's account for a

significant share of the world's industrial investment, production, employment

and trade.

DEFINITION AND MEANING

"A corporation that controls production facilities in more than one country, such

facilities having been acquired through the process of foreign direct investment.

Firms that participate in international business, however large they may be,



81

solely by exporting or by licensing technology are not multinational

enterprises."

The various benchmarks sometimes used to define " multi nationality" are

that the company must:

? Produce (rather than just distribute) abroad as well as in the headquarters

country

? Operate in a certain minimum number of nations (six for example)
? Derive some minimum percentage of its income from foreign operations

(e.g., 25%)

? Have a certain minimum ratio of foreign to total number of employees,

or of foreign total value of assets

? Possess a management team with geocentric orientations.
? Directly control foreign investments (as opposed simply to holding

shares in foreign companies).

MERITS OF MNC

The important arguments in favor of the MNCs are mentioned below:

? MNCs help increase the Investment level and thereby the income and

employment in host country.

? The transnational corporation has become vehicles for the transfer

technology, especially to the developing countries.

? They also kindle a managerial revolution in the host countries through

professional management and the employment of highly sophisticated

management techniques.

? The MNCs enable the host countries to increase their exports and

decrease their import requirements.

? They work to equalize the cost of factors of production around the world.



82
? MNCs provide an efficient means of integrating national economies.
? The enormous resources of the multinational enterprises enable them to

have very efficient research and development systems. Thus, they make

a commendable contribution to inventions and innovations.

? MNCs also stimulate domestic enterprise because to support their own

operations, the MNCs may encourage and assist domestic suppliers.

? MNCs help increase competition and break monopolies.


DEMERITS OF MNC

The various cases against MNCs are:



? The MNCs technology is designed for worldwide profit maximization,

not the development needs of poor countries.

? Through their power and flexibility, MNCs can evade or undermine

national economic autonomy and control, and their activities may be

inimical to the national interests

? MNCs may destroy competition and acquire monopoly powers.
? The tremendous power of the global corporations poses the risk that they

may threaten the sovereignty of the nations in which they do business.

? MNCs retard growth of employment in the home country.
? The transnational corporations cause fast depletion of some of the non-

renewable natural resources in the host country. They have also been

accused of the environmental problems.

? The transfer pricing enables MNCs to avoid taxes by manipulating prices

on intra company transactions



83

? The MNCs undermine local culture and traditions; change the

consumption habits for their benefits against the long-term interests of

the local community.

PRESPECTIVE



Future holds out an enormous scope for the growth of MNCs. The

changes in the economic environment in a large number of countries

indicate this. A united Nation's report described several developments

that points to a rapidly changing context for economic growth, along

with a growing role transnational corporations in that process. These

include:

? Increasing emphasis on the market forces and a growing role for the

private sector in nearly all developing countries.

? Rapidly changing technologies that are transforming the nature of

organization and location of international production.

? The globalization of firms and industries.
? The rise of services to constitute the largest single sector in the world

economy and

? Regional economic integration, which involve both the world' largest

economies as well as selected developing countries.

MULTINATIONALS IN INDIA

The inflow of foreign funds through MNCs in India is showing an upward trend

in recent years. 1991 onwards, the Government of India has taken several steps

to attract foreign investments and entry of the MNCs, such as:

? Abolition of industrial licensing
? Removal of restriction on investment under the MRTP Act



84
? Liberalization of policy and procedure for transfer of technology, import

off capital goods, etc

? Existing companies are allowed to raise foreign equity up to 51%
? Provisions of the FERA have been relaxed. As a result, companies with

more than 40% foreign equity can operate like any other Indian

company.

? Foreign companies are permitted to use their trade in domestic markets.



During the nineties, there has been an increasing trend of foreign

investments in India. The government approved 666 foreign collaborations in

1990. This number has become more than double to 1520 by 1992. At present,

the USA is the largest investor in India, followed by Switzerland, Japan and UK.

Foreign investment has largely been concentrated in sector such as fuel and oil

refineries, power chemicals and electrical equipments and electronics.

THE RISE OF INDIAN MULTINATIONALS




After liberalization of Indian market in 1991 and in its due course, India INC. is

flying high not only over the Indian sky but globally. Though it took almost a

decade when many Indian forms have slowly and surly embarked on the global

path and lead to the emergence of the Indian Multinational Companies. With

each passing day, Indian businesses are acquiring companies abroad, becoming

worldwide popular suppliers and are recruiting staff across national boundaries.

While an Asian Paints is painting the world red, Tata is rolling out indicas from

Birmingham and Sundaram Fasteners nails home the fat that the Indian

company is an entity to be reckoned with.





85

Some facts:


? TATA Motors sells its passenger ? car Indica in the UK through a

marketing alliance with Rover and has acquired a Daewoo Commercial

Vehicles unit giving it access to markets in Korea and China.

? INFOSYS has 25,634 employees including 600 from 33 nationalities

other than Indian. It has 30 marketing offices across the world and 26

global software development centers in the US, Canada, Australia, the

UK and Japan.

? Ranbaxy is the ninth largest generics company in the world. An

impressive 76 % of its revenues come from overseas.

? Dr.Reddy's Laboratories became the first Asia Pacific pharmaceutical

company outside Japan to list on the New York Stock Exchange in 2001

? Asian paints are among the 10 largest decorative paints makers in the

world and has manufacturing facilities across 24 countries.

? Small auto components company Bharat Forge is now the world's

second largest forging maker. It became the world's second largest

forgings manufacturer after acquiring Carl Dan Peddinghaus a German

forgings company last year. Its workforce includes Japanese, German,

American and Chinese people. It has 31 customers across the world and

only 31 percent of its turnover comes from India.

? About 80% of revenues for Tata Consultancy Services come from

outside India. It raised in Asia's second ?biggest tech IPO this year and

India's largest IPO ever.

? Sundaram Fasteners is not merely a nuts and bolts company. It believes

in thinking out of the box. Probably that is why it decided to acquire a

plant in China. The plant in Jiaxin city in the Haiyan economic zone has



86
ensures one fact; that its customers who were earlier buying Sundaram

products in Europe and the US, did not have to go far from home to

access the product.



87

Lesson 4



FOREIGN CAPITAL AND COLLABORATION


FOREIGN CAPITAL



Most countries of the world which embarked on the road to economic

development had to depend on foreign capital to some extent. The degree of

dependence however, varied with the extent to which domestic resources could

be mobilized, the state of the domestic economy in respect of technical progress,

the attitude of the respective governments, etc. But the fact cannot be denied that

foreign capital contributes in many important ways to the process of economic

growth and industrialization.

NEED FOR FOREIGN CAPITAL



The need for foreign capital for a developing country like India can arise on

account of the following reasons:

? Domestic capital is inadequate for purposes of economic growth.



? For want of experience, domestic capital and entrepreneurship may not

flow into certain lines of production.

? There may be potential savings in a developing economy like India but

this may come forward only at a higher level of economic activity.

? It may be difficult to mobilize domestic savings for the financing of

projects that are badly needed for economic development.

? Foreign capital brings with it other scarce productive factor, such as

technical know-how, business experience and knowledge.

FORMS OF FOREIGN CAPITAL

The different forms of foreign investments are:



88
Direct Foreign Investment -

Foreign capital can enter India in the form of direct investments.

Foreign Collaboration



Joint participation of foreign and domestic capital. There are three types of

foreign collaborations- joint participation between private parties, between

foreign firms and Indian government and between foreign governments and

Indian government.

Inter-Government Loans



Since the Second World War, there has been a growing tendency towards direct
inter-government loans and grants.

Loans from International Institutions



International Monetary Fund (IMF), Aid India Consortium, Asian Development

Bank (ADB) and the World Bank have been the major sources of external

assistance to India.

External Commercial Borrowing (ECB)


Export credit agencies like the US Exim bank, the Japanese Exim Bank,

and ECGC of the UK etc. to obtain commercial borrowing from the

capital market.



The Government of India liberalized its policy towards foreign

investment in 1991 to permit automatic approval for foreign investment up to 51

percent equity in 34 industries. The Foreign Investment Promotion Board

(FIPB) was also set up to process applications in cases not covered by automatic

approval. During 1992-93 several additional measures were taken to encourage

direct foreign investment, portfolio investment, NRI investment etc.



89

FOREIGN COLLABORATION



During the early phase of the planning era, the national policy towards foreign

capital did recognize the need for foreign capital, but decide not to permit it a

dominant position. Consequently foreign collaborations had to keep their equity

within the ceiling of 49 % and allow the Indian counterpart a majority stake.

Moreover, foreign collaborations were to be permitted in priority areas, more

especially those in which we had not developed our capabilities.

But in an overall sense, our policy towards foreign collaborations

remained restrictive and selective. Consequently, during 1961-70 a total of

2,475 foreign collaborations were approved and during the next decade (1971 ?

80) an other 3, 041 collaborations were sanctioned.

It was only during the eighties that government relaxed its policy

towards foreign collaborations. This was done specifically in respect of

investors from Oil Exporting Developing countries with well- defined package

exemptions. This was followed by Technology Policy Statement (TPS) in

January 1983.The objective of the policy was to acquire imported technology

and ensure that it was of the latest type appropriate to the requirements and

resources of the country.

FOREIGN INVESTMENTS BY COUNTRIES

Technical collaborations were allowed on financial criteria i.e. royalty or

lumpsum payment or a combination of both. These relaxations resulted in a

larger inflow of foreign direct investment and consequently, the number of

approvals during the decade (1981 ? 90) reached a record figure of 7,436

involving a total investment of Rs1, 274 crores.

Country wise analysis of foreign collaboration reveals that USA was at

the top accounting for nearly Rs.322.7 crores of investment. This was one fourth



90
of the total foreign collaboration approvals. This was followed by Federal

Republic of Germany (17.2%), Japan, UK, Italy, France and Switzerland. Five

countries USA, West Germany, Japan, UK and Italy accounted for nearly 63%

of total approved foreign investment. Even Non-Resident Indians (NRIs)

contributed about Rs.113 crores accounted for 8.9 % of total investment.


FOREIGN INVESTMENT BY INDUSTRIES

An industry wise analysis of foreign collaboration approvals reveals that

Electrical and electronic (including telecommunications) accounted for 22% of

the total approval, indicating highest priority to this sector, followed by

industrial machinery 15.5%. Foreign collaboration in chemicals (other than

fertilizers) was third in importance. By and large it may be stated that the

priority sector accounted for about 70% of total approvals. It implies that foreign

collaborations approvals were more or less in conformity with the general

climate towards foreign capital in the country at that time.


FINANCIAL AND TECHNICAL COLLABORATIONS

Foreign collaborations are of two types:

? Technical approvals involving payments for technology
? Financial approvals involving equity capital of an existing or new

undertaking.



Upto Rs.600 crores the Industry Ministry accords approval on the advice

of Foreign Investment Promotion Board (FIPB), but larger projects over this

limits are approved by Cabinet Committee on Foreign Investment (CCFI).



91

Sources Reveal:

? Financial collaborations were just 20.1% during 1981? 1985, their share

improved to 28.8 % during 1985-90 but rose sharply to 72 % during

1991- 1997.

? The amount of approved investment also increased sharply from Rs.899

crores during 1985-90 to Rs.1, 73,510 crores in august 1998.

Obviously there is a shift from technical approvals to financial approvals during

the post liberalization phase. However Government has been successful in

attracting more foreign investment in the post liberalization phase as compared

to the earlier period.

TAKEOVERS AND IMPLEMENTATION OF FOREIGN
COLLABORATIONS



Indian entrepreneur seems to have lost it bargaining power and well known

Indian brands have been taken over by TNCs. It needs to be emphasized that

takeovers do not add to new production capacities. On the contra, there are

likely to add to higher outflow of foreign exchange. In foreign collaborations,

transfer of superior technology has not been the main consideration.



Some Recent Takeovers


? ICI (UK) attempted to take over Asian paints.
? Hindustan lever took over Tomco.
? Premier automobiles transferred two of its plants to Peugeot.
? Transfer of Lakme's brand to a 50:50 joint venture with the Levers.
? TVS Suzuki takes up Hero Honda.
? Whirlpool took over TVS Whirlpool.
? Suzuki's attempted to gain majority control in Maruti Udyog.



92
? Bridgestone increasing its stake from 51% to 74 % in joint venture with

ACC.

? Bausch & Lomb increasing its share in Indian venture to 69%.
? Henkel increasing its share to 70%.
? Blue star edged out of Motorola Blue Star and Hewlett Packard India.
? Shriram's share got reduced in Shriram Honda Power.


Once the Indian partners transferred the units, they neither had the

money nor the marketing network with them.

FDI AND THE INDIAN STOCK MARKET


? Stock market is an ideal form of organization, which by providing easy

liquidity encourages the public to invest, and this brings out the latent

surplus in the economy.

? For this purpose, the shares of good promising companies should be

listed on the market. During the 70's and 80's, a good number of blue

chip TNC scripts got listed. Notable among them were: Abbot labs,

Burroughs Wellcome, E.Merck, Eskayef, Fulford, Hoechst, May &

Baker, Organon, Parke Davis and Wyeth.

? The chief objective of offering shares to the public by the affiliates could

not be to raise fresh capital from the public, but was only a strategy of

diluting foreign equity without reducing their foreign parent's quantum

of investment.

? In the post-liberalization period, the policy was reversed. At the first

available opportunity, many foreign affiliates raised foreign equity to

majority levels.



93

? While raising share of foreign equity to majority level, most TNCs

indicate a tendency to avoid the stock market. TNCs are side ? stepping

the stock market and they sell off the existing units to locals and promote

Wholly - Owned -Subsidiaries (WOS) or transfer certain divisions /

products to wholly owned subsidiaries of the parent company.

? The number of technical collaborations declined from 629 in 1997 ?

1928 to only 299 in 2003-2004. There was a tendency to convert purely

technology transfer arrangements later into financial collaboration by

buying the equity share of the concerns.

FOREIGN CAPITAL AND COLLABORATION ? A CRITICAL
ASSESSMENT


? Transfer of technology can be effected with more investment being made

by technologically advanced MNCs. But, there are aspects of foreign

direct investment which seriously impinge on people's welfare and

national sovereignty.

? Nearly half of the Foreign Investment is in the nature of portfolio

investment, which only strengthens speculative trading in shares. This is

only underlines the fact that MNCs are able to manipulate the stock

market to suit their goals.

? Foreign direct investment is catering to the needs of the upper middle

and affluent classes. Consequently, there is an utter neglect of the wage

goods sector.

? Portfolio investment made in India is in the nature of hot money, which

may take to flight if the market signals indicate any adverse trends. Thus,

it would be a mistake to treat portfolio investment as a stable factor in

our growth.



94
? A larger inflow of foreign direct investment, more so in the financial

sector, will lead to building of reserves, which in turn will expand

domestic money supply. Consequently, inflationary trend of prices gets

strengthened in the process.

? MNCs after their entry are rapidly increasing their shareholding in Indian

companies. This has resulted in a number of takeovers by the MNCs and

thus, the process of Indianisation of the corporate sector has been totally

reversed.



95

Lesson 5



FUTURE PERSPECTIVE OF INDIA INDUSTRY

AND MANAGEMENT



INDUSTRIALIZATION


Industrialization has a major role to play in the economic development of

the underdeveloped countries. The gap in per capita incomes between the

developed and underdeveloped countries is largely reflected in the disparity in

the structure of their economies; the former are largely industrial economies,

while in the later production is confined predominantly to agriculture.

The pattern of "growth though trade" in primary commodities was,

however, realized in the nineteenth century when industrialization was closely

linked with international trade. In general, the net value of the output per person

is higher in industry than in agriculture. In industry, the scope for internal as

well as external economies is greater than in agriculture.

Besides, the process of industrialization is associated with the

development of mechanical knowledge, attitudes and skills of industrial work,

with the experience of industrial management and with other attributes of a

modern society which in turn, are beneficial to the growth of productivity in

agriculture, trade, distribution and other related sectors of the economy. As a

consequence of these factors, any successful transfer of labour from agriculture

to industry contributes to economic development.


THE PATTERN OF INDUSTRIALIZATION


While there is now almost universal agreement on the importance of

industrialization, there is still much debate regarding the proper pattern of

industrial development. Industrial development depends upon the rate of capital



96
formation. Supply of capital goods can be augmented either through imports or

through domestic production. Increase in the imports of capital goods depends

upon the rate of growth of exports.

Since the scope for the expansion of the exports of primary

commodities is limited, export promoting manufacturing industries may

be developed or alternatively, certain import substituting domestic

industries may be developed, the effect of which will be to release

foreign exchange for the imports of capital goods.

In addition, within the current volume of imports, capital goods may be

substituted in place of consumer goods. Thus, export-promoting industries,

import-substituting industries and domestic capital goods industries are not

mutually exclusive alternatives.

Simultaneously development of all the three classes of industries will

approve to be the most effective strategy of industrialization. The relative role of

each is likely to vary with the particular economic circumstances of individual

countries as well as with their current phase of industrialization.

REVEIEW OF INDUSTRIAL GROWTH



The progress of industrialization during the last 50 years since 1951 has been a

striking feature of Indian economic development. The process of

industrialization, launched as a conscious and deliberate policy under Industrial

Policy Resolution of 1956 and vigorously implemented under five year plans,

involved heavy investments in building up capacity over a wide spectrum of

industries. As a result, over the last nearly 50 years, industrial production went

up by about five times, making India the tenth most industrial country of world.



97

Rate of Industrial Growth

Industrial growth has not been uniform since 1951. After a steady growth of

about 8 % during the initial period of 14 years (1951-1965), there was a

fluctuating trend since then. In the sixties (1961-70) the average growth of

Industrial output was put at 5.5 % and in the seventies (1971-80) the average

growth rate was about 4 % per annum. During the 7th plan (1985-90), the growth

rate had picked up to an average of over 8% per annum and in the eight plan, it

had declined to 7.3 % per annum.

Strategy of Industrial Development

The development strategy adopted by the Indian planners consisted of

accelerated industrialization with a base of heavy industry and to generate

expanding foreign exchange earnings.

Growing Importance of Basic and Capital goods



The structure of Indian industries had changed in favor of basic and capital

goods sector. On the other hand the share of consumer goods industries such as

textiles, sugar, paper, tobacco, etc., declined.

Structure of Effective Demand and Pattern of Industrial Development
An unduly large share of resources is absorbed in production, which relates

directly or indirectly to maintaining or improving the living standards of the

higher income groups.

Consumer durables like refrigerators, air-conditioners, TVs, cars and

scooters, etc., go to satisfy the wants of the richer sections of the community

while the consumer non-durables like sugar, tea, coffee, cloth, vanaspati,

matches, etc., enter into mass consumption.



98
Relative Roles of Public and Private
The growth of the public sector in a big way in the heavy and basic industries,

the machine goods sector, engineering industries etc., Public sector units

accounted for 7 % of the number of factories in the country but they employed

32 % of the productive capital. Only 56% of the productive capital is employed

by the private sector units, which account for 91 % of the total number of

factories.

Growth of Infrastructure



The rapid pace of industrial growth and the development of productive capacity

have been marked by remarkable, though still inadequate, expansion of

infrastructural facilities in the country.

Science and Technology



Significant progress has been recorded in the field of science and technology.

India now ranks third in the world in respect of technological talent and

manpower. Indian scientists and technologists are working in many areas on the

frontiers of today's knowledge, as in agriculture and industry, in the

development of nuclear power and the use of space technology for

communication and resource development.

INDIAN INDUSTRIES ? STRUCTURAL TRANSFORMATION

The industrial structure has been widely diversified covering broadly the entire

range of consumer, intermediate and capital goods. The progress India has made

in the field of Industrialization is clearly reflected in the commodity composition

of India's foreign-trade in which the share of imports of manufactured goods has

steadily declined; on the other hand, industrial products, particularly engineering

goods have become a growing component of India's exports.



99

Finally, the rapid stride in industrialization has been accompanied by a

corresponding growth in technological and managerial skills for efficient

operation of the most sophisticated industries and also planning, designing and

construction of such industries.

TOTAL QUALITY MANAGEMENT
Total Quality Management (TQM), a buzzword phrase of the 1980's, the

concept and principles, though simple seem to be creeping back into existence

by "bits and pieces" through the evolution of the ISO 9001 Management Quality

System Standard.

Companies who have implemented TQM include Ford Motor Company,

Philips Semiconductor, SGL Carbon, Motorola and Toyota Motor Company.

The latest changes coming up for the ISO 9001:2000 standard's "Process

Model" seem to complete the embodiment.

TQM is the concept that quality can be managed and that it is a

process. Total Quality Management (TQM) is a participative

management style that stresses total staff commitment to "customer"

satisfaction. It is a holistic approach to managing complex organizations

and replaces top-down management with decentralized customer-driven

decision-making.

Total Quality Management is an integrated management system for

creating and implementing a continuous improvement process eventually

producing results that exceed customer expectations. It is based on the

assumption that 90 % of problems are a result of process, not employees.

TQM ? CONCEPT & OBJECTIVES

TQM is a process and strategy that in certain situations can improve an

organization's effectiveness and efficiency. TQM places responsibilities for



100
quality problems with management rather than on the workers. A principal

concept of TQM is the management of process variation which seeks to identify

special and common needs.

The objective of TQM is the continual improvement of processes,

achieved through a shift in focus from outcomes (or products) to the processes

that produce them. TQM achieves its objective through data collection and

analysis, flow charts, cause and effect diagrams, and other tools, which are used

to understand and improve processes.

PRINCIPLES OF TQM
The principles of TQM are as follows:


? Quality can and must be managed.
? Everyone has a customer and is a supplier.
? Processes, not people are the problem.
? Every employee is responsible for quality.
? Problems must be prevented, not just fixed.
? Quality must be measured.
? Quality improvements must be continuous.
? The quality standard is defect free.
? Goals are based on requirements, not negotiated.
? Life cycle costs, not front end costs.
? Management must be involved and lead.
? Plan and organize for Quality improvement.

KEY ELEMENTS OF TQM

The key elements of TQM are as follows:

? Pursue New strategic Thinking



101

? Know your customers
? Set True customer requirements
? Concentrate on prevention, not correction
? Reduce chronic Waste
? Pursue a continuous Improvement strategy
? Use structured methodology for process improvement
? Reduce Variation
? Use a Balanced Approach
? Apply to all functions

TQM ? PROCESS IMPROVEMENT AND PROBLEM SOLVING
SEQUENCE

This consists of five stages:

I. PLAN (Plan a change)




This stage consists of three parts:


(A) Define the problem


1. Recognize that what you are doing is a "PROCESS".

2. Identify the commodity being processed - Process inference.

3. Define some measurable characteristics of value to the commodity.

4. Describe the "PROCESS".

5. Identify the "BIG" problem.

(B) Identify possible causes



1. "BRAINSTORM" what is causing the problem.
2. Determine what past data shows.






102
(C) Evaluate possible causes

1. Determine the relationship between cause and effect.
2. Determine what the process is doing now.



II.

IMPLEMENT (Implement the change)



1. Determine what change would help.

2. Then make the change.

III.

MONITOR (Observe the effects)



1. Test the change.

2. Determine what change worked (Confirmation)

IV. ACTION (Take permanent action)



1. Ensure the fix is embedded in the process and that the resulting
process is used.
2. Continue to monitor the process to ensure the problem is fixed for

good and the process is good enough.


V. FOLLOW UP (To ensure continuous improvement)

1. Return to "step 5".

POLITICAL GEOGRAPHY

In the early 1990s the threat of superpower nuclear war faded as an omnipresent

nightmare in international relations. Yet new threats and dangers quickly

emerged to take the place of those imagined during the cold war. Fears about

terrorism also grew with a series of bombings from Paris, London, and Moscow

to Oklahoma City, New York and Atlanta. U.S troops and embassies in Saudi

Arabia, Tanzania, Kenya and Yemen were the targets of terrorist attacks.

But it was only after the disruption, shock and panic of the devastating

terrorist attacks of September 11, 2001 and subsequent incidents of bioterrorism



103

that would politics was given new definition and clarity by the world's most

powerful state. The new meta-narrative of geopolitics is the "war against

terror".

Beyond the high dramas of geopolitics, already existing trends in

everyday economic and political life deepened in the last decade and a half. New

social movements have forced questions concerning the politics of identity and

lifestyles onto the political agenda.

The globalization of financial markets, telecommunication systems, and

the internet further re-arranged governing notions of " here" and "there", "

inside" and " outside ", "near" and "far". With global media networks

broadcasting news 24 hours a day and the Internet spreading a world wide web,

the `real' geographies of everyday life were becoming strikingly virtual as well

as actual.

Political geographic research during this intense decade and a half of

transformation has been triangulated between these multi-scalar geopolitical

transformations, the emergence of new intellectual discourses within academia,

and the legacy of political-geographic research traditions.

Many of the problematics defining the late twentieth and early twenty

first century are inescapably political - geographic questions, from murderous

spatial practices like `ethnic cleansing' or hyperbolic spatial narratives about `

borderlessness' and `the end of distance' to generalized concern about the

changing status of key human geographic notions like `territory', `community',

`scale', `place' and `democracy'. In simple, an extra ordinary geopolitical

transformations and change throughout the country.

Contemporary research on political - geographic questions is located

within the mainstream of contemporary social science. It spans the study of

global economic transformations, geopolitical re-structuring, the politics of



104
identity, technological change and territoriality, politics of the household and

interpersonal relations, and the politics of the environment. With its inherited

discourses on place and politics, technological transformations and geopolitical

space, nature and the contested politics of human-environment relations,

political geographers are well positioned to contribute to the larger social

science conversation about the human condition in the 21st century.


QUESTIONS:


1. Outline the present status of infrastructural facilities in our country.
2. Point out the constraints which inhibit the rapid growth of infrastructural

facilities.

3. Bring out the role of infrastructure in the growth of a county.
4. Bring out the strengths, problems and remedies for different areas of

infrastructure.

5. List out the recent developments in Telecom sector.
6. Evaluate the significance of S & T in economic growth suggest suitable

measures to promote S & T.

7. Explain the theory of Demographic Transition.
8. Examine the trend of population growth and its implications on

economic growth.

9. State the importance of Human Development. What are the measures to

assess human development?

10. `Gender Related Development is important to achieve overall human

development', Comment and highlight the extent of gender equality in
India.

11. Evaluate the Human Development across the state in India. Give reasons

for the variation among the states.

12. What do you understand by International Relations? Why is IR important

in today's environment?

13. Explain the different approaches of International Relations management.
14. Evaluate the role played by MNCs in developing countries.
15. What is Multinational Corporation? Explain its characteristics.
16. Outline the major MNCs in India. Also, the rise of Indian Multinationals

at global.

17. Describe the need of foreign capital for economic growth.



105

18. What are the forms of foreign capital? List the major investing foreign

countries in India.

19. Explain the concept Financial and technical collaborations.
20. Why should have collaborations? Explain the various strategies of

collaborations.

21. Critically examine the impact of FDI on Indian stock market.
22. Examine the relationship between FDI flows and liquidity and volatility

of stock market.

23. Trace out the growing significance and major forms of takeover in India.
24. Outline the trade and pattern of industrialization in India.
25. Examine the concept of leaders in drafting the long term plans to

promote industrial growth in our country.

26. What is TQM? Give its objectives and key elements.
27. Explain the principles of TQM. Describe its process improvement and

problems solving sequence.

28. Examine the growth and future perspective of Indian industries.
29. What is `Geo Political Dimension'? Give its relevance in today's global

environment.

30. Describe the need and emergence of new dimension of business

environment, `geo political transformation'.



106
UNIT III

LESSON 1

LAW OF CONTRACT (INDIAN CONTRACT ACT 1872)

Most of the business transactions are based on promises to be performed at a

later date. These promises whether made by businessmen or by others create

certain rights and obligations and if these rights and obligations are not

enforceable, the business world would be paralysed. It is with the enforcement

of these promises that the law of contract is concerned. The contract Act does

not lay down the list of obligations that would be enforceable by law but lays

down the rules subject to which rights or duties created by the parties would be

enforced. The parties to the contract can make whatever rules they want, if

these rules are not inconsistent with the provisions of the Act, they would be

enforced by courts of law.

Meaning: Sec.2(h) "An agreement enforceable by law is a contract." Therefore,

a contract has two important elements, one is the agreement, and the other is the

obligation which is enforceable by law.

Agreement: Agreement is the outcome of the consensus between the parties

who enter into a contract, i.e., the promise made between them, represents

concurrence of their minds. (Sec.13). These would not be an agreement if the

parties do agree but not on the same thing in the same sense , i.e., consensus is

not sufficient. There has to be consensus ad idem. Sec.2(e) defines an

agreement as "Every promise or every set of promises forming consideration

for each other". A proposal when accepted becomes a promise.

Example: A received Rs.10,000 from B and promises to supply him 10 bags of

rice after 10 days. It is a promise. It shall be a set of promises if A promises to

supply 10 bags of rice after 10 days and B promises to pay him Rs.10,000 after

the rice is supplied. Thus, Agreement = Offer + Acceptance.



107

Offer (Proposal): Offer [(proposal) (Sec.2(a)] "When one person signifies to

another his willingness to do or to abstain from doing anything with a view to

obtaining the assent of the other to such act or abstinence, he is said to make a

proposal".

Acceptance: Acceptance has been defined u/s(Sec.2(b)) as " When the person to

whom the proposal is made, signifies his assent thereto, the proposal is said to

be accepted. A proposal when accepted becomes a promise".

Example: A lost his Cell Phone and announced that anybody who

brought his cell phone back home would receive Rs.500 as reward. B

heard the announcement and brought the Cell Phone back home. He is

said to have accepted the proposal by doing the act required by A and

hence he can recover the reward.

Promisor: A person who makes the promise is called the `Promisor' or

`Offeror'. And the person to whom the proposal is made is known as

`Promisee' or `Offereee'.In case an agreement is a set of promises,

then a person becomes a promisor and promisee. Thus if there is an

offer, acceptance and consensus ad idem between the parties, there is an

agreement. However, this agreement does not become a contract unless

there is a corresponding obligation, i.e, enforceability at law.

Obligation (Sec.10): It is the legal duty of a person to carry out what he

has promised to do or not to do. All agreements are contracts if they are

made by the free consent of the parties competent to enter into contract,

for a lawful consideration and with a lawful object and not hereby

expressly declared to be void. Therefore, a person becomes legally

bound to do what he has promised to do only if the following conditions

are fulfilled.



108
1. Capacity of the Parties: Only those persons who are competent

to enter into a contract can create valid obligations. A minor, a

lunatic, a drunkard etc., suffer from flaw in capacity to Contract

and therefore the contract made with them can't be enforced

against them.

2. Free Consent: Absence of consent does not create a legal

obligation. For an agreement to become a contract the parties to

an agreement should give their consent to the agreement out of

their own free will. It should not be induced by coercion, undue

influence, fraud, misrepresentation, etc .

3. Lawful Consideration and Object: Consideration means

something in return, i.e., `quid pro quo' Ex. A promises to give

his bike to B for no money, here , there is no consideration, hence

no obligation. Without consideration a promise can't be

enforceable by law. However, consideration need not be in

money or in kind. It may be of an act, abstinence, a promise to

do, or not to do something. But consideration should be lawful.

Example: A promises to pay a sum of money to B if B smuggles the

object proposed by A. In this case , there is no lawful object.

4. Intention to create Legal Relationship: Social obligation can't

bring legal relationship. For example: Father promised his son to

pay Rs.100 per day for pocket expenses, however later on did not

pay the said amount. Therefore, if the parties do not intend to be

bound by law at the time they make promises, nothing can bound

them to their promises, later on.



109

5. Possibility of Performance: Example: A promised B that he

would make The Sun raises in the West if B pays him Rs.1 lakh.,

and B agreed to it, this agreement does not create any legal

obligation as it would not be enforceable by law.

6. Meaning should be certain: Example: A agrees to sell B's horse.

There is nothing whatever to show which horse is intended. The

agreement is void for uncertainty.

7. Legal Formalities (If Required): An agreement to make a gift

for natural love and affection should not only be in writing but

registered also (Sec. 25). In the absence of any such specific

requirement an oral agreement is as enforceable as a written

agreement.

8. Agreements not Declared Void: Indian Contract Act has

specifically declared some agreements to be not enforceable at

law e.g. Agreements in restraint of trade, Agreements in restraint

of marriage, wagering agreements etc. Thus the law of Contract is

not the whole law of Agreements. It is the law of those

agreements which create obligations.

The Law of Contract is not the Whole Law of Obligations

There may be certain duties (obligations) which the law may enforce

though they were not agreed to by the parties. Such obligations do not

create a contract between them. These obligations may arise in the

following ways:

(1)

Torts and Civil Wrong: Where a tort is committed by one person

against another the former is bound to compensate the latter even



110
though there is no agreement between the two.

(2)

Judgments of Courts: These obligation are imposed by the Court

by their verdict.

(3)

Quasi Contracts : Where law creates and enforces an obligation

between two persons, it is known as Quasi Contract.

(4)

Status Obligation: It is the duty of the husband to provide

necessities of life to his wife, and if the husband fails to do so, the

wife can enforce this obligation at the courts of law and can seek

maintenance from her husband.

KINDS OF CONTRATS

(1)

Valid Contract: It is an agreement which fulfils all the essentials

of enforceability and can be enforced by either of the parties at the

courts of law.

(2)

Voidable contract: Sec 2(i) lays down that " An agreement

which is enforceable by law at the option of one or more of the

parties thereto, but not at the option of the other or others, is a

Voidable Contract." This arises where the consent of one of the

parties to the contract is not free. Ex., A, at the point of pistol

makes B agree to sell his bicycle for Rs.500. Here B's consent is

not free.

Circumstances in which a contract is voidable are:

(A) At the conception

(i)

Consent caused by fraud (Sec.14, 17 and 19)

(ii)

Consent caused by coercion (Sec. 14, 15 and 19)

(iii) Consent caused by misrepresentation (Sec. 14, 18 and 19)



111

(iv)

Consent caused by undue influence (Sec. 14, 16 and 19A)

(v)

When one party induces another to enter into an agreement the

object of which is unlawful though it is not known to the other

party.

(B) By Subsequent Default

(i)

Where offer of performance is not accepted (Sec. 38)

(ii)

When one party prevents performance of reciprocal promise

(Sec. 53)

(iii) When a party fails to perform at the time fixed, if time is the

essence of the contract (Sec. 55)

Consequences of Recession of Voidable Contract

When a voidable contract is rescinded ?

(A)

As regards the party at whose option the contract is voidable, if

he has received any benefit from another party to such contract,

he must restore such benefit so far as may be, to the person from

whom it has been received. The benefit must have been received

under the contract and not otherwise. Security for performance is

not the benefit received under the contract.

(B)

As regards the other party, he need not perform his promise.

(3)

Void Contract: [Sec 2(j)] "A contract which ceases to be

enforceable by law becomes void when it ceases to be

enforceable" E.g A agrees to sell his car to B for Rs.10,000. All

essentials of a contract are fulfilled. If A refuses to sell his car, B

can go to the court and the court would enforce A's promise. But

if, before the delivery the car is destroyed by Tsunami, the court

cannot enforce anything and hence this contract becomes



112
unenforceable i.e void. Thus, void contract is one which was a

valid contract when it was made but becomes void later on. Those

agreements which are void ab initio (from the very beginning) are

called Void Agreements and those which become void later on are

called Void Contracts.

Following circumstances will transform a valid contract into a void

contract.

(A)

Contingent contract: A contingent contract to do or not to do

something on the happening of an uncertain future event, becomes

void, when the event becomes impossible (Sec 32).

(B)

Repudiation of a voidable contract: When a voidable contract is

rescinded by the party at whose option it is voidable, the contract

becomes void.

(C)

Subsequent impossibility (Sec. 56): A contract which becomes

impossible to perform, after it is made, becomes void.

(D)

Subsequent illegality (Sec. 56): A contract becomes void if it

becomes illegal after it is made.

Consequences of a Void Contract: Sec. 65 lays down that when a

contract becomes void, the party who has received any advantage under

such agreement, should restore it or make compensation for it to the

party from whom he received it.

(4) Void Agreement: An agreement not enforceable by law is called a

void agreement. If any of the essentials of obligations



113

(enforceability), other than free consent, is missing the agreement

cannot be enforced at Courts of Law.

Invalidating Causes

In the following circumstances an agreement is void ab initio.

(1)

If a party to the contract is incompetent to contract (Sec.10, 11 &
12)

(2)

If the agreement is without consideration (Sec. 10, 25) barring
certain exceptions.

(3)

If the consideration or object is unlawful (Sec. 23)

(4)

If the meaning of the contract is uncertain (Sec. 29)

(5)

If the agreement is to do an impossible act (Sec. 56)

(6)

If both the parties enter into an agreement under a mistake as to
the essential matter of fact (Sec. 20). There is no consensus ad
idem.

(7)

If both the parties are under a mistake as to foreign law (Sec. 21)

(8)

If the agreement is in restraint of marriage of a person other than
a minor (Sec. 26)

(9)

If the agreement is in restraint of trade (Sec. 27) barring certain
exceptions.

(10) If the agreements is in restraint of legal proceedings (Sec. 28)
(11) If the agreement is by way of wager (Sec. 30)
(5)

Illegal Agreement: An illegal agreement is one which is

forbidden by law i.e. it is entered into with the intention of

violating the law. Example: A agrees to steal furniture for B for a

consideration of Rs. 1,00,000. It is illegal and therefore it is void.

It also attracts the penal provisions of the law it is violating.



114
While all illegal agreements are void, all void agreements are not illegal.

Parties to an illegal agreement cannot get any help or protection from

law courts.

(6)

Unlawful Agreements: (Sec. 23). In simple words an agreement

may be unlawful because it is:

(a) Immoral ?i.e. contrary to sound and positive morality as

recognized by law, e.g. cohabitation.

(b) Opposed Public Policy ?i.e. contrary to the welfare of the State

as tending to interfere with the civil or judicial administration, or

with individual liberty of citizens, e.g. bribing a public servant.

(c) Illegal ?i.e. contrary to positive law, being forbidden either by

statutes law or common law;

Hence a line of demarcation needs to be drawn between illegal and

unlawful agreements.

(7)

Unenforceable Contract: Contracts which have all the essentials

of enforceability but cannot be enforced due to certain

technicalities like insufficiency of stamp, etc. are termed as

unenforceable contracts.

(8)

Express Contract: It is one where the intention of parties are

stated in words either written or spoken. Example: A goes to B's

shop and asks him to supply 10 boxes @ Rs.20per box. B tells

him that he is ready to supply the boxes at the mentioned rate.

This is an Express Contract. The same intention of the parties may

be expressed in writing signed by both the parties.



115

(9)

Implied Contract: The evidence of an implied contract is to be

deduced from the acts or conduct of the parties. No exchange of

words either written or spoken takes place, but the manifestation

of their intentions is inferred from their respective acts or

conduct.

(10) Quasi Contracts: These are those obligations which are imposed

by the Contract Act and do not arise from a consensus between

the parties. Example: A, a tradesman, leaves goods at B's house

by mistake. B treats the goods as his own. B is bound to pay A for

them, the obligation is imposed by law.

(11) An Executed Contract: It is one where both the parties to a

contract have discharged their respective responsibilities by

performing them. All transactions of Cash sales are the examples

of Executed Contracts.

(12) An Executory Contract: It is one where one or both the parties

are yet to perform their respective promises. It is partly Executed

and partly Executory.

(13) Unilateral Contract: It is one where at the time when the

contract is made one party has already performed his obligation

and the obligation on the part of the other party only, is

outstanding. Example: A goes to a bus stand ticketcounter and

buys a ticket for journey. A has performed his duty under the

contract i.e., to pay the scheduled fare. But the bus authority is

yet to perform his promise i.e., of carrying him from one point to

another. This is a Unilateral Contract.



116
(14) Bilateral Contract: As against Unilateral Contract, a Bilateral

Contract is one where at the time of entering into the contract

both the parties to the contract are yet to perform their respective

promises.

OFFER AND ACCEPTANCE

As seen earlier the first step in making a contract starts with making an

offer. We shall, therefore, discuss as to what constitutes a `lawful offer'.

OFFER OR PROPOSAL

`Offer' and `Proposal' are synonymous terms. According to sec. 2(a),

"when one person signifies to another his willingness to do or to abstain

from doing anything with a view to obtaining the assent of that other to

such act or abstinence, he is said to make a proposal". The person

making the proposal is called the "Promisor" and the person to whom

the offer is made is called the "Promisee" [Sec.2 (c)] Example: A offers

to pay Rs.100 to B if B washes his cloths. A is the promisor and B is the

promisee for the promise to pay Rs.100. A is the promisee and B is the

promisor for washing his clothes. It is important to note that the offer

must be made with the object of obtaining the assent of the other party.

RULES REGARDING A LAWFUL OFFER

A valid offer must be in conformity with the following rules :

(1) Terms of an offer should be definite or should be capable of being

made definite.

(2) Offer should be made with an intention to create legal

relationship: In the absence of such intention no obligation can arise.

Absence of such intention may be express or implied.



117

Example: Where A proposes to sell his `Television' to B for Rs.10000

but tells him that the breach of promise by either party would not create

legal rights, no binding contract would arise in that case even if the

agreement is in writing.

(3) There is no valid offer where:

(i) it is mere statement of intention:

Example: A gives an advertisement in the television that he would

dispose of his building by auction on 5th June at 8 a.m. in the lawns of

his bungalow. B, who saw this advertisement, travels a distance of 200

kilometers and reaches A's bungalow at the given time and date and

finds that auction has been cancelled. A cannot be held liable because his

advertisement to hold auction did not constitute an offer, it was merely

an intention to hold an auction where bids would be received.

(ii) It is an invitation to offer:

Where A puts his building to public auction he is inviting offers from the

bidders and he accepts the offer by falling the hammer or by any other

customary method. The actual offer is the bid made at the auction and

the auctioneer accepts it.

(4) Offer must be communicated : The offer must be brought to the

knowledge of the person to whom it is made. If an offer is not

communicated to the offeree, the latter cannot accept it.

(5) Offer should not contain a term the non-compliance of which

would amount to acceptance.



118
Example: A writes to B "I shall buy your furniture for Rs, 10,000, if you

do not reply I shall assume that you have accepted my offer. This is not a

valid offer.

(6) Offer may be express or implied: An offer is express when it is

stated in words, written or spoken.

(7) An offer may be general or specific: When an offer is made to a

specific person it is called a specific offer and it can be accepted

only by that person but when an offer is addressed to an uncertain

body of individuals i.e. the world at large, it is a general offer and

can be accepted by any member of the general public by fulfilling

the condition laid down in the offer.

LAPSE OF AN OFER

An offer once made cannot be continued for ever. Liability of the party

making the proposal cannot be continued for all times to come. An offer

becomes invalid i.e. comes to an end in the following circumstances.

(1) When the stipulated or reasonable time has expired: Example:

A offers to sell his Modern table to B for Rs. 5000 and tells him

that B must communicate his acceptance within three days. On

fourth day B brings Rs.5000 to buy the table. A refuses. A is not

bound because the offer has lapsed on the third day.

(2) Where the offer becomes illegal after it is made:Example: X of

Mumbai offers to buy Peanuts from Y of Chennai. Next day

Central Government prohibits inter-state transfer of Peanuts. The

offer lapses by subsequent illegality.



119

(3) Where the offerer or offeree dies or becomes insane before the

offer is accepted: Example: A offers to sell his cow to B. Before

B could accept the offer, A dies. B cannot accept the offer.

(4) Where the offeree does not accept the offer in the mode the

offerer had prescribed: Example: A writes to B that he wants to

sell his furniture to B for Rs.10000. He also writes to B that if B

wants to buy the furniture, he (B) should send him (A) a telegram

accepting the offer. B writes a letter to A accepting the offer. If A

keeps silence over it, this is a valid acceptance. But if A informs

B that he is not treating this letter as acceptance because the offer

has not been accepted by a telegram, then this letter would not

result in acceptance.

(5) An offer lapses by counter offer by the offeree: Example: A

tells B, "I want to buy your land for Rs. 10,000". B says, "I shall

sell my land for Rs.15,000." A refuses to buy it for Rs. 15,000.

Then B insists that A should buy it for Rs. 10,000. A refuses to

do so. A is not bound by his offer because the statement of B that

`I shall sell my land for Rs. 15,000' is not acceptance of A's offer

but a counter offer. When a counter offer is made the original

offer lapses and there is nothing for the offeree to accept. But an

enquiry should not be mistaken for a counter offer.



(6) An offer comes to an end when the offerer revokes his offer

before it is accepted.



120
Tender (standing offer):A tender is an offer made in response to an

invitation to offer. The party inviting tenders may require a definite

quantity of goods or services to be supplied, in that event the person who

responds to that invitation is said to have made a definite offer and

would become bound by it if it is accepted.

ACCEPTANCE: "When the person to whom the proposal is made

signifies his assent thereto the proposal is said to be accepted. A

proposal once accepted becomes a contract." Where two parties make

offers to each other with identical terms, without knowing each other's

offer. These offers are called `CROSS OFFERS".

Who can accept?: Where an offer is made to a specified person, only

that specified person can accept it and nobody else. But where the offer

is made to an uncertain body of persons, anybody can accept the offer.

RULES REGARDING ACCEPTANCE

(1) Acceptance must be absolute and unqualified: The offeree

must accept unconditionally all the terms of the offer without any
change in any of them.

(2) The Acceptance must be expressed in some usual and

reasonable manner, unless the proposal prescribes a manner
in which it is to be accepted

(3) Acceptance by performing Conditions or receiving

Consideration:

Example: A offers to pay Rs. 100 to B if B throws the ring ball into
the basket in first attempt. B immediately throws the ball into the
basket in first attempt. By the performance of this condition B is said
to have accepted the offer."

(4) Acceptance must be communicated: Unless acceptance is

communicated it would not turn the offer into a contract. However,



121

if the offeree posts the acceptance but it does not reach the offerer,

it would be deemed to be communicated. But the offerer cannot

frame his offer in such a way that the silence of the offeree would

become his acceptance.

(5) Acceptance should be given within stipulated time and before

the offer is revoked: If the offer lapses before acceptance is given

the acceptance would not result into a contract. But where no time

limit is stipulated the offer should be accepted within a reasonable

time.

(6) Where an offeree accepts an offer knowing that it has been

made by the offeror under a mistake, the contract is not binding

upon the offeror.

CONSENSUS AD IDEM

According to sec. 13, "Two or more persons are said to consent when

they agree upon the same thing in the same sense". But where the

circumstances lead one party to believe that the other would have

understood the terms of the agreement, law may imply unenforceable

agreement. Because it is not what a party thinks in his mind but what

he expresses or does that binds him to the contract.

COMMUNICATION OF OFFER AND ACCEPTANCE

Problem of communication arises when the parties to the contract are not

face to face with each other. It arises in the following cases:

(A) Contracts through Telephones: (B) Contracts through Post: Offer

and acceptance are generally made through letters and telegrams.



122
Advertisements, notices, circulars, etc., are also used to make an offer.

The rules of communication regarding them are as follows:

(1) "The communication of a proposal is complete When it comes to

the knowledge of the person to whom it is made..." (sec. 4)

(2) "....The communication of an acceptance is complete

(i) as against the proposer, when it is put in a course of transmission

to him, so as to be out of the power of acceptor; and

(ii) as against the acceptor, when it comes to the knowledge of the

proposer..." (Sec.4)

From the above it is clear that an offer may be revoked at any

time before the acceptance is put in course of transmission to the

proposer.

REVOCATION OF PROPOSAL AND ACCEPTANCE

"A proposal may be revoked at any time before that communication of

its acceptance is complete as against the proposer, but not afterwards."

COMMUNICATION OF REVOCATION

"The communication of a revocation is complete... As

against

the

person who makes it, when it is put into a course of transmission to the

person to whom it is made, so as to be out of the power of the person

who makes it as against the person to whom it is made, when it comes to

his knowledge."

Agreement to Agree in Future

Agreement to enter into an agreement upon terms to be settled

afterwards between the parties is a contradiction in terms. It is absurd to



123

say that a man enters into an agreement till the terms of agreement are

settled; until those terms are settled, he is perfectly at liberty to retire

from the bargain".



124
LESSON 2

CONSIDERATION AND COMPETENCE TO CONTRACT



Consideration is one of the elements of obligation. An agreement

becomes enforceable only if it is supported by consideration. (Sec. 10)

"All agreements are contracts if they are made... for a lawful

consideration..." It clearly shows that consideration is an important pre-

requisite of a valid contract. (Sec.25) "An agreement made without

consideration is void..." Hence the rule is "No Consideration, No

Contract.

ESSENTIALS OF CONSIDERATION

(A) Based on Definition

An analysis of the above definition reveals the following essentials of

consideration.

(1) Consideration must move at the desire of the promisor

(2) It may move from promisee or from any other person on behalf
of promisee.
Stranger to Contract

It is a general rule that a person, who is not a party to a contract, cannot

sue on the contract even though the contract is for his benefit i.e. unless

there is privity of contract ,the relationship is not enforceable.

(3) Consideration may be past, present or future

(4) Consideration must be real and not illusory

(5) Consideration may consist of an act, abstinence or promise

(B) Based on other provisions



125

In addition to the above essentials of consideration that emerge from the

definition, the others are as follows:

(1)

Consideration must be lawful: (Sec. 10) "All agreements are

contracts if they are made for a lawful consideration" The consideration

of an agreement is unlawful, if (i) it is forbidden by law, or (ii) it is of

such a nature that, if permitted, it would defeat the provisions of any

law, or (iii) it is fraudulent or (iv) it involves or implies injury to the

person or property of another or (v) the court regards it as immoral or

opposed to public policy (Sec. 23).

(2) Consideration need not be adequate to the value of the promise:

(Sec. 25) "An agreement to which the consent of the promisor is freely

given is not void merely because the consideration is inadequate, but the

inadequacy of the consideration may be taken into account by the Court

in determining the question whether the consent of the promisor was

freely given."

Exceptions to the Rule of Consideration

(Sec. 25) In the following cases the agreement would be enforceable

even though they are made without consideration.

(1) Love and affection:

An agreement without consideration is enforceable if

(a) it is made out of love and affection;

(b) the love and affection is natural because the parties are so

related to each other;

(c) the agreement is in writing;

(d) the agreement is registered under law.



126
(2)

Compensation for voluntary services: "If it is a promise to

compensate, wholly or in part, a person who has already

voluntarily done something for the promisor, or something

which the promisor was legally compellable to do."

(3)

Promise to pay a time barred debt: If it is a promise, made

in writing and signed by the debtor or his agent to pay wholly

or in part a debt which is barred by the limitation.

(4)

Contract of Agency: Sec. 185 provides "No consideration is

necessary to create an agency."

(5)

Gift already Made: (Sec. 25) "Nothing in this Section shall

affect the validity, as between the donor and donee, of any gift

actually made."

UNLAWFUL AGREEMENTS

According to the Indian Contract Act (Sec. 23), "The consideration or

object of an agreement is lawful, unless it is forbidden by law; or is of

such a nature that, if permitted, it would defeat the provisions of any

law; or is fraudulent; or involves or implies injury to the person or

property of another; or the court regards it as immoral, or opposed to

public policy.



Let us see the provisions of Sec. 23 which make an agreement

unlawful.

(1)

Forbidden by law: If the object of the agreement or the

consideration of the agreement is the doing of an act which is

forbidden by law, the agreement is void.



127

(2)

If it is of such a nature that, if permitted, it would defeat the

provisions of any law: i.e. it would indirectly lead to a violation

of the law.

(3)

If it is fraudulent: Any agreement whose object is to defraud

others is void.

(4)

If it involves or implies injury to the person or property of

another:

(5)

If the Court regards it as immoral.

(6)

If the Court regards it as opposed to public policy: The

following agreements have been held to be against public policy:

(a)

Trading with Enemy:

(b)

Agreements for stifling prosecution: An agreement to suppress

criminal charge is void because if a person has committed a

crime, public policy requires that he should be prosecuted.

(c)

Agreements interfering with the Course of Justice: An

agreement entered into with the object of exercising improper

influence on judges or officers of justice is bad in law as opposed

to public policy.

(d)

Agreements tending to an abuse of legal process: There may be

two types of agreements under this head, one is Maintenance and

the other is Champerty.

(e)

Agreement to vary the period of limitation: An agreement that

reduces or increases the period of limitation as laid down by the

law of limitation is opposed to public policy.

(f)

Traffic in Public Offices: An agreement whereby an appointment

to a public office is procured for monetary consideration is



128
against public policy because it would cause corruption in

administration of the State.

(g)

Agreement creating an interest opposed to duty

(h)

Agreements restraining personal freedom

(i)

Agreements opposed to parental rights and duties: Father is

supposed to be the guardian of his children and in the absence of

the father their mother acquires this right as well as responsibility

and this right cannot be bartered away.

(j)

Marriage Brokerage Agreements: Agreement to pay reward to

a person for negotiating marriage is opposed to public policy.

The following agreements are also opposed to public policy.

(i) Agreements in restraint of marriage.

(ii) Agreements in restraint of trade.

(iii)Agreements in restraint of legal proceedings.

COMPETENCE TO CONTRACT

Competence to contract is one of the essential elements of enforceability

of an agreement. According to Sec. 10 `All agreements are contracts if

they are made by... the parties competent to Contract.....As regards the

meaning of competence, Sec.11 of the Contract Act states that "Every

person is competent to contract who is of the age of majority according

to the law to which he is subject, and who is of sound mind, and is not

disqualified from contracting by any law to which he is subject. The

following persons are incapable of entering into a contract:

(1)

A person who has not attained the age of majority i.e. a person

who is still a MINOR.



129

(2)

A Person who is not of sound mind i.e. a person of unsound

mind.

(3)

A Person who is disqualified by any other law to which he is

subject (i.e., other disqualifications.)

MINOR

A minor is a person who has not completed 18 years of age on the date

of the contract. But in the following two cases the minority would

continue up to the completion of 21 years of age:

(a) Where a guardian to the person or property of a minor is appointed

by the court.

(b) When the minor is under the guardianship of the court of Wards, i.e.

minor's property is looked after by the Court of Wards.

RULES RELATING TO AN AGREEMENT WITH A MINOR

(1) Agreement is void ab initio : According to Sec. 10, an agreement

made by a person incompetent to contract is void. Hence an agreement

made by a minor is void. The agreement is void ab initio i.e. void from

the very beginning.

However, Sec. 68 of the Contract Act lays down "if a person,

incapable of entering into a contract or any one whom he is legally

bound to support, is supplied by another person with necessaries suited

to his condition in life, the person who has furnished such supplies is

entitled to be reimbursed from the property of such incapable person.

(2) Minor can be a promisee: An agreement is void as against a minor

but a minor can derive benefit under a contract. The privilege of

minority is available to the minor only. Other person cannot avoid the



130
contract because the promisee is a minor. Thus the minor can enforce the

agreement against the other party.

(3) A Minor's Agreement cannot be ratified : Since an agreement with

a minor is void ab initio, i.e. it does not exist in the eyes of law, it

cannot be ratified by a minor after completing the age of majority.

(4) No Compensation is payable by a minor: Though an agreement

with a minor is void, the minor would not be called upon to refund any

benefit which he has received, under such an agreement (i.e. Sec. 64 and

Sec. 65 would not apply to a minor).

(5) The rule of estoppel does not apply to a minor i.e. a minor can

misrepresent his age and enter into an agreement and can still plead

infancy to avoid that agreement.

(6) No recovering back the money paid: Where an infant has paid

money under a void or voidable contract he cannot recover it unless

there has been a total failure of consideration.

(7) A minor can be sued in tort. If what the infant has done lies right

outside the terms of the contract, the infant can be made liable.

(8) Agency. A minor acting as an agent cannot be held liable even for

those acts for which other agents would incur personal liability.

(9) Negotiable Instrument: A minor can also make and deliver

negotiable instruments and can negotiate them making all other persons

except himself liable on them.

(10) Partnership: An agreement with a minor is void. But a minor can

be admitted into the benefits of partnership with the consent of all the



131

partners (Partnership Act). This means that the losses of the firm can be

recovered only from his share in the firm but unlike other partners his

personal property would not be liable for firm's losses.

(11) Insolvency: A minor cannot be adjudicated insolvent.

(12) Joint Agreement: Where a minor and another person make a joint

promise, the promisee cannot enforce the agreement against the minor

but he can enforce it against the other person.

(13) Guardianship: Though an agreement made by a minor is void but

an agreement made by the guardian of a minor is binding on the minor if

it is for the benefit of the minor.

(14) Minor's Parents: Agreements made by a minor are not enforceable

against his parents, even through they are for the necessaries supplied to

the minor.

PERSONS OF UNSOUND MIND

According to Sec.11 only a person of sound mind can make a contract.

Sec. 12 further defines the term sound mind in these words, "A person is

said to be of sound mind for the purpose of making a contract if, at the

time when he makes it, he is capable of understanding it and of forming

a rational judgment as to its effect upon his interest...". Thus two

essentials of `Sound Mind' emerge from this definition:

(1) Capacity to understand: and Capacity to make a rational

judgment



There must be free and full consent of the parties so as to bind

them to the contract. Consent is an act of reason accompanied by



132
deliberations. It is due to the absence of rational and deliberate consent

that conveyance and contracts of persons of unsound mind are deemed to

be invalid. A person of unsound mind may be divided into two broad

categories:

(1) Idiots: An Idiot is one who has lost mental powers completely, i.e.,

his brain has not developed enough to enable him, at all to understand

the contract or of forming a rational judgment of its effects upon his

interest. Hence an agreement with him is always void. However, he

can be sued for necessaries of life supplied to him or to anybody

dependent upon him.

Lunatic: Lunacy arises from the illness of the brain or mental or bodies

distress. The essential element of lunacy is that the mental powers of the

lunatic are so deranged that he cannot make a rational judgment of any

subject the period of lunacy.

Effects of agreements made by persons of unsound mind

An agreement made with a person who is suffering from lunacy at the

time of entering into the contract, is void (Sec. 10).

OTHER DISQUALIFICATIONS

(1)

Alien Enemy : A citizen of a foreign country is known as an
alien.

(2)

Foreign sovereigns and their Ambassadors. Foreign sovereigns

and their Ambassadors in India can enter into contracts with

Indian citizens and can sue them in Indian courts but no suit can

be filed against them in local courts unless the permission of the

Central Government to this effect has been obtained.



133

(3)

Corporation: A corporation is an artificial person created by law.

Being a legal person only, it cannot act by itself. It has to act

through some agent. Its contractual capacity suffers from the

following limitations:

(a) Natural Limitation: (b) Legal Limitation:

(4)

Insolvents: When a person is adjudged insolvent, he loses

contractual powers over his property.

(5)

Convicts: A person against whom a sentence of imprisonment is

passed loses the capacity to contract.

(6)

Married women: A married woman used to suffer from certain

disabilities with regard to making of contracts under English Law

before 1935. A woman, married or single, in Indian Law, is under

no disability as regard, entering into contracts with regard to the

property that belongs to her (e.g. stridhan of a married women).

Her contracts can be enforced against her husband's property if he

has failed to provide necessaries of life to her and the contract

relates to necessaries of life.

FREE CONSENT

"The term free consent consists of two requirements viz.: (i) There

should be consent: and (ii) Consent should be free.

Consent: The term consent is defined by Sec. 13 as "Two or more

persons are said to consent when they agree upon the same thing in the

same sense"



134
Free Consent: "Consent is said to be free when it is not caused by: (1)

Coercion, as defined in section 15, or: (2) Undue influence as defined in

section 16, or: (3) Fraud, as defined in section 17, or: (4)

Misrepresentation, as defined in section 18, or: (5) Mistake subject to the

provisions of sections 20, 21 and 22. Consent is said to be so caused

when it would not have been given but for the existence of such

coercion, undue influence, fraud, misrepresentation or mistake." (Sec.14)

COERCION

"Coercion is the committing or threatening to commit any act, forbidden

by the Indian Penal Code or the unlawful detaining or threatening to

detain any property, to the prejudice of any person whatever, with the

intention of causing any person to enter into agreement."(Sec.15)

(A) Coercion is committing any act forbidden by the Indian Penal

Code with the intention of causing any person to enter into an agreement.

(B) Coercion is the threatening to commit any act forbidden by the

Indian Penal Code, with the intention of causing any person to enter into

an agreement.

(C) Coercion is the Unlawful detaining of any property to the

prejudice or any person, whatever, with the intention of causing any

person to enter into an agreement.

(D)

Coercion is the threatening to detain, unlawfully, any property,

to the prejudice of any person whatever, with the intention of causing

any person to enter into an agreement.

Effect of Coercion: Sec, 19 states "When consent to an agreement is

caused by coercion... the agreement is a contract voidable at the option



135

of the party whose consent was so caused" i.e. the aggrieved party at its

option, may set aside the contract or may insist that the contract shall

performed. Sec. 72 further states, "A person to whom money has been

paid, or anything delivered... under coercion, must repay or return it."

UNDUE INFLUENCE

[Sec. 16 (1)] "A Contract is said to be induced by `undue influence'

where the relations subsisting between the parties are such that one of

the parties is in a position to dominate the will of the other and uses that

position to obtain an unfair advantage over the other." Three conditions

should be fulfilled:

(1) The relation between the contracting parties should be such that one

party is in a position to dominate the will of the other; and

(2) Such party has used that dominant position to enter into a contract

with the latter; and

(3) Such party has obtained an unfair advantage over the other.

Effect of Undue Influence: [Sec. 19 (A)] "When consent to an

agreement is caused by undue influence the agreement is a contract

voidable at the option of the party whose consent was so caused.

Pardanashin Women: A pardanashin woman is susceptible to undue

influence and therefore, the law throws around her a "Special cloak of

protection" i.e. where such a woman signs a sale, mortgage, gift or

release, the person obtaining her signatures has to prove that the

transaction was not only explained to her but also that she had

understood the transaction and that no undue influence was exercised on

her.



136
Difference between Coercion and Undue Influence

(1) Type of pressure: Physical or crude force; Mental pressure.

(2) Burden of Proof : Prove how the coercion was exercised; Prove

that the other party was in a position to dominate his will and that

the transaction is unconscionable.

(3) Nature of Transaction: The party uses that position to obtain an

unfair advantage over the other; A transaction, though fair but

induced by coercion can still be avoided.

FRAUD

Fraud means and includes any of the following acts committed by a party

to a contract, or with his connivance or by his agent with intent to

deceive another party thereto or his agent or to induce him to enter into

the contract:

(a)

The suggestion, as a fact, of that which is not true by one who

does not believe it to be true;

(b)

The active concealment of a fact by one, having knowledge and

belief of the fact;

(c)

A promise made without any intention of performing it;

(d)

Any other act fitted to deceive;

(e)

Any such act or omission as the law specially declares to be

fraudulent (Sec. 17)

Can silence be Fraudulent? (Sec. 17) "silence as to facts likely to

affect the willingness of a person to enter into a contract is not fraud



137

unless the circumstances of the case are such that regard being had to

them it is the duty of the person keeping silence to speak or unless his

silence is in itself equivalent to speech."

Exception: Silence would amount to Fraud if

a)

It is the duty of the person keeping silence to speak. These are

called uberrimae fidei contracts: b) His silence is, in itself, equivalent

to speech:

Effect of Fraud

(A) Where Fraud is the cause of the contract:(i)Voidable Contract:(ii)

Damages

(B) Where Fraud is not the cause of contract: An attempt at deceit,

which does not deceive, is no fraud.

MISREPRESENTATION

Misrepresentation, better known as `Innocent misrepresentation' has

been defined by Sec. 18 as: "Misrepresentation means and includes-

(a) The positive assertion in a manner not warranted by the information

of the person making it, of that which is not true, though he believes

it to be true;

(b) Any breach of duty which, without an intent to deceive, gains an

advantage to the person committing it, or any one claiming under

him, by misleading another to his prejudice or to the prejudice of any

one claiming under him;



138
(c) Causing, however innocently, a party to an agreement to make a

mistake as to the substance of the thing which is the subject of the

agreement".

Effect of Misrepresentation

"When consent to an agreement is caused by... misrepresentation, the

agreement is a contract voidable at the option of the party whose consent

is so caused.

Distinction between Fraud and Misrepresentation

Fraud: Intention to deceive there is no intention to deceive, fraud to

recover damages not available in case of misrepresentation.

Misrepresentation: the aggrieved party loses the right to rescind the

contract if it could discover the truth with ordinary diligence. In Fraud,

this exception does not apply.

MISTAKE

Salmond has described these contracts as "error in Causa". As "error in

consensus" i.e. there is no `consensus ad idem'; because of some

misunderstanding, called `Mistake', parties do not agree upon the same

thing in the same sense. According to Indian Contract Act, Mistake is

of two types, (1) Mistake as to law and (2) Mistake as to fact.

MISTAKE OF LAW (Sec. 21): "A contract is not voidable because it

was caused by a mistake as to any law in force in India, but a mistake as

to a law not in force in India has the same effect as mistake of fact." The

reason of this rule lies in the legal maxim " Ignorance of law is no

excuse".



139

MISTAKE OF FACT: (Sec 20:) "Where both the parties to an

agreement are under a mistake as to a matter of fact, essential to the

agreement, the agreement is void". Essentials: (1) Mistake must be

mutual; (2) Mistake must relate to a fact: (3) Fact should be

essential:

Type of Mistakes: Mistake of fact can be divided into the following

categories:

(A) Bilateral Mistakes: (1) Mistake as to the subject Matter: (i)

Mistake regarding existence of subject matter: (ii) Mistake

regarding identity of the subject matter i.e. the two parties

understand different things to be the subject matter: (iii)Mistake

regarding quantity of subject matter:(iv) Mistake regarding title of

the subject matter: Where both the parties believe that the seller

has the right to sell the goods but unknown to both, the seller has

no title to the goods.(v) Mistake regarding the price of the subject

matter.(vi) Mistake regarding the quality of the subject matter.

(2) Mistake as to the possibility of performance of the agreement:

if both the parties to the agreement believe that the agreement is

capable of being performed though it is not, the agreement is

void.

(B) Unilateral Mistake: In the following circumstances, even unilateral

mistake will make the contract voidable.

(1) Mistake as to the nature of transaction: This is an exception to the

rule that mistake must be mutual. When one of the parties to a contract,



140
without any fault of his own, is made to commit a mistake as to the

nature of transaction the agreement would be void.

(2) Mistake as to the person contracted with: When the identity of the

person is essential to the contract and a mistake is committed regarding

that, the contract can be avoided.

VOID AGREEMENTS

Following are those contracts, which may not lack any of the essentials,

discussed so far, still the law has specifically declared them void, they are:

(1)

AGREEMENT IN RESTRAINT OF MARRIAGE

(2)

AGREEMENT IN RESTRAINT OF TRADE

Following agreements are not in Restraint of Trade

(1)

Restraint during the term of service

(2)

Agreements which promote business and do not restrain it

(3)

Trade Combinations

(3) AGREEMENT IN RESTRAINT OF LEGAL PROCEEDINGS

(Sec. 28) "Every agreement, by which any party thereto is restricted absolutely

from enforcing his rights under or in respect of any contract by the usual legal

proceedings in the ordinary tribunals, or which limits the time within which he

may thus enforce his rights, is void to that extent".

Exceptions-Arbitration Agreements: An agreement to refer all future as well

as present disputes in connection with a contract, to arbitration is valid.



141

(1) UNCERTAIN AGREEMENTS: (Sec. 29) "Agreements the meaning of

which is not certain or capable of being made certain, are void."

(2)

AGREEMENT BY WAY OF WAGER:(Sec. 30) "Agreements by way

of wager are void, and no suit shall be brought for recovering anything

alleged to be won on any wager, or entrusted to any person to abide by the

result of any game or other uncertain event on which any wager is made.

AGREEMENTS COLLATERAL TO WAGERING

AGREEMENTS

However transactions collateral or incidental to a wagering agreement are not

void as per Sec. 30. Lotteries: A lottery is a game of chance and is a wagering

agreement. Cross-ward Puzzles: Cross-word puzzles are of two types:

(i) One in which any person solving the puzzle would be awarded, therefore it

is a game of skill and not of chance and is not a wagering agreement.

(ii) The other type of cross-word puzzle is one in which the prize would be

awarded to that competitor whose solution corresponds to the solution kept

with the editor of the newspaper.

CONTINGENT CONTRACTS



(Selection 31) "A contingent contract is a contract to do or not to do

something, if some event, collateral to such contract does or does not happen".

Thus it is a contract, the performance of which is dependent upon, the happening

or non-happening of an uncertain event, collateral to such contract.



142
Example: X contracts to pay Y Rs.30,000, in consideration of Y paying Rs.

100 monthly premium, if Y's factory is burnt. This is a contingent contract.

Example: A agrees to pay B a sum of money if B marries C.

Contracts of

insurance and contracts of indemnity and guarantee are popular instances of

contingent contracts.

RULES RELATING TO CONTINGENT CONTRACTS

1. Contingent on the act of party to the contract: If the performance of the

promise is contingent upon the pleasure and will of the promisor it is not a

contract at all.

2. Contingent upon the act of a third party: where the performance of a contract

is conditional upon the act of a third party it is a valid contract.

3. Contingent on the happening of an event: (Sec.32) "Contingent contracts to

do or not to do anything if an uncertain future event happens cannot be

enforced by law unless and until that event has happened".

4. Contracts contingent on the non-happening of an event: (Sec.33)



"Contingent contracts to do or not to do anything if an uncertain future

event does not happen, can be enforced when the happening of that event

becomes impossible, and not before".

5. Contracts contingent on the happening or not happening of a specified event

within fixed time (Sec.35). "Contingent contracts to do or not to do

anything if a specified uncertain event happens within a fixed time, becomes

void if at the expiration of the time fixed, such event has not happened or if,

before the time fixed, such event becomes impossible".



143

6. Contracts contingent on impossible event: (Sec. 36-)"Contingent agreement

to do or not to do anything if an impossible event happens, are void, whether

the impossibility is known or not to the parties to the agreement at the time

when it is made."

Difference between a Contingent Contract and Wagering Agreement

The main points of distinction between the two are as under:

1

A contingent contract is a valid contract but wagering agreement is

absolutely void.

2

Parties have real interest in the occurrence but or non-occurrence of the

event e.g., insurable interest in the property insured. Parties are not

interested in the occurrence of the event except for the winning or losing

the bet amount.

3

Future uncertain event is merely collateral: uncertain event is the sole

determining factor of the agreement.

QUASI CONTRACTS

A quasi contract is an obligation or a right created by law. A quasi contract is

based on the principle that no person can enrich himself unjustly, at the expense

of another. If he obtains a benefit which under the circumstances he ought,

equitably to pay for it, the law would compel him to make the payment even

though there is no contract requiring payment.

Following relations created by law resemble those created by contract:

(1)

NECESSARIES SUPPLIED TO A PERSON INCAPABLE OF

CONTRACTING: Example: X supplies Y, a lunatic, with necessaries



144
suitable to his conditions in life. X is entitled to be reimbursed from Y's

property.

(2)

PAYMENT OF MONEY DUE BY ANOTHER: (Sec.69) "A person

who is interested in the payment of money which another is bound by

law to pay, and who therefore pays it, is entitled to be reimbursed by the

other."

(3)

NON-GRATUITOUS ACT FOR ANOTHER'S BENEFIT: (Sec.70)

"Where a person lawfully does anything for another person or delivers

anything to him not to do so gratuitously and such other person enjoys

the benefits thereof the latter is bound to make compensation to the

former in respect of, or to restore the thing so due or delivered".

Example: A Businessman leaves goods at B's house with the intention of

persuading B to buy them. B treats the goods as his own. He is bound to

pay A, for them.

(4)

FINDER OF LOST GOODS: (Sec. 71) "A person who finds goods

belonging to another and takes them into his custody is subject to the

same responsibility as a bailee."

(5)

MONEY PAID BY MISTAKE OR UNDER COERCION: (Sec.72)

"A person to whom money has been paid or anything delivered by

mistake or under coercion must repay or return it". Example:X and Y

jointly owe Rs. 1000 to Z. X alone pays the amount to Z and Y, not

knowing the fact pays Rs.1000 over again to Z. Z is bound to repay the

amount to Y



145

(6)

SUIT UPON QUANTUM MERUIT: The phrase `Quantum Meruit'

means as much as earned or `in proportion to the work done'. This is a

general rule, usually invoked where there is no agreement to pay for the

work done.(Sec. 70)



146
LESSON 3

PERFORMANCE AND DISCHARGE OF CONTRACTS

`Performance of Contracts' refers to the fulfillment of their respective legal

obligations, created under the contract, by both the parties. It is a natural and

normal mode of discharging a contract. The various aspects relating to

performance are discussed below:

(A) ACTUAL PERFORMANCE

"The parties to a contract must either perform, or offer to perform their

respective promises, unless such performance is dispensed with or excused

under the provisions of this Act of any other law...".

Example: X bought goods from Y and promised to pay Rs.1000 to Y on

10th June. X went to Y on 10th June to give Rs.1000 in cash but Y did not accept

it. Though X may not be discharged from the payment of Rs.1000 but he would

not be liable to pay interest thereon from 10th June onwards.

For a tender to become legally valid it must fulfill the following conditions:

(i)

It should be unconditional (Sec. 38): The promisor while offering to

perform his promise must do it unconditionally.

(ii)

Offer must not be of a part only (Sec. 38): The offer must be of whole

payment or performance. A creditor is not bound to accept less than what

is actually due and would not lose his right to interest on that portion.



147

(iii)

Proper time and place (Sec. 38): The offer must be made at a proper

time and place.

(iv)

Able and willing (Sec. 38): "It must be made... under such

circumstances that the person to whom it is made may have a reasonable

opportunity of ascertaining that the person by whom it is made is able

and willing there and then to do the whole of what he is bound by his

promise to do."

(v)

Reasonable opportunity (Sec. 38): "...If the offer is an offer to deliver

anything to the promisee, the prmisee must have a reasonable

opportunity of seeing that thing offered is the thing which the promisor is

bound by this promise to deliver. Thus buyer must have reasonable

opportunity to ascertain that the goods offered are contracted for.

(vi)

Tender of money: A tender of money must be in legal tender money,

and not in any foreign currency, promissory note or cheque'

(vii) Joint Promisees: (Sec. 38) "An offer to one of several joint promises

has the same legal consequences as an offer to all of them."

(B)

REFUSAL TO PERFORM (SEC.39)

"When a party to a contract has refused to perform, or disabled himself from

performing, his promise in its entirely, the promisee may put an end to the

contract, unless he has signified, by words or conduct, his acquiescence in its

continuance."





148
(C)

WHO CAN DEMAND PERFORMANCE?

It is only the promisee who can demand performance of the promise under a

contract, for the general rule is that "a person cannot acquire rights under a

contract to which he is not a party."

(D)

BY WHOM CONTRACTS MUST BE PERFORMED

(1) By the promisor himself: (Sec. 40) "If it appears from the nature of the case

that it was the intention of the parties to any contract that any promise contained

in it, should be performed by the promisor himself, such promise must be

performed by the promisor..." Generally where personal skill, taste etc. are

involved, it is presumed that the promisor would himself perform the contract.



(2) By promises representative: (Sec. 37) "...Promises bind the

representatives of the promisors in the case of death of such promisors before

performance, unless a contrary intention appears from the contract".



Example: A promises to deliver goods to B on a certain day on payment

of Rs.10,000. A dies before that day . A's representatives are bound to deliver

the goods to B, and B is bound to pay Rs.10,000 to A's representatives.

(E)

OFFER TO PERFORM (TENDER)

(Sec 37) "A party who has not already performed his obligation must offer to

perform the same. (Sec. 38) "Where a promisor has made an offer of

performance to the promisee, and the offer has not been accepted, the promisor

is not responsible for non-performance, nor does he thereby lose his rights under

the contract". Example: A promises to paint a wall for B. A must perform this

promise personally.



149

(F) DEVOLUTION OF JOINT RIGHTS AND JOINT LIABILITIES
(JOINT PROMISES)

When two or more persons make a joint promise to other or others, they are

known as joint promisors e.g. A and B sign a promissory note, they are joint

promisors. When a promise is made to two or more persons, they are Joint

Promises. Following rules govern such promises:

(1)

All promisors must jointly fulfill the promise: (2) Any one of the joint

promisors may be compelled to perform: (3) Right of contribution

between joint promisors: (4) Effect of release of one joint promisor:

Example: A, B and C Jointly promise to pay D Rs. 5000. D may compel

either A or B or C to pay him Rs. 5000.

(G) TIME AND PLACE FOR PERFORMANCE

(1) Within a reasonable time: (Sec 46)"Where a promisor is to perform his

promise without application by the promisee, and no time for performance is

specified, the engagement must be performed within a reasonable time." "The

question what is a reasonable time is, in each particular case, a question of fact."

(2) During usual hours of business: (Sec.47) "When a promise is to be

performed on a certain day, and the promisor has undertaken to perform it

without application by the promisee, the promisor may perform it at any time

during the usual hours of business on such day and at the place at which the

promise ought to be performed."

(3) Promisee's duty to apply for performance: (Sec. 46) "When a promise

is to be performed on a certain day, and the promisor has not undertaken to



150
perform it without application by the promisee, it is the duty of the promisee to

apply for performance at proper place and within the usual hours of business."

(4) Promisor should apply for fixing a reasonable place: (Sec.49) "When a

promise is to be performed with application by the promisor and no place is

fixed for the performance of it, it is the duty of the promisor to apply to the

promisee to appoint a reasonable place for the performance of the promise, and

to perform it at such place."

(5) In the manner prescribed by promisee: (Sec. 50) "The performance of

any promise may be made in any manner, or at any time which the promisee

prescribes or sanction."

(H) PERFORMANCE OF RECIPROCAL PROMISES

[Sec. 2 (f)] "Promises which form the consideration or part of the consideration

for each other are called reciprocal promises." Rules regarding the performance

of reciprocal promises are:

(1) When promises are to be performed simultaneously: "When a contract

consists of reciprocal promises to be simultaneously performed no promisor

need perform his promise unless the promisee is ready and willing to

perform his reciprocal promise."

(2) In the order, which the nature of transaction requires: (Sec. 52) "Where

the order in which reciprocal promises are to be performed is expressly fixed

by the contract, they shall be performed in that order; and where the order is

not expressly fixed by the contract, they shall be performed in that order

which the nature of the transaction requires."



151

(3) When the performance of a promise is dependent upon other: (Sec. 54)

"When the contract consists of reciprocal promises, such that one of them

can not be performed or that its performance cannot be claimed till the other

has been performed and the promisor of the promise last mentioned fails to

perform it, such promisor cannot claim the performance of the reciprocal

promise, and must make compensation to the other party for any loss which

such other party may sustain by the non-performance of the contract." These

are known as mutual and dependent promises.

(4) When one party prevents the other from performing his promise:

(Sec.53) " When a contract contains reciprocal promises, and one party to

the contract prevents the other from performing his promise the contract

becomes voidable at the option of the party so prevented.

(5) Where the promise is partly legal and partly illegal: (Sec.57) "Where

persons reciprocally promise, firstly, to do certain things which are legal,

and secondly, under specified circumstances, to do certain other things

which are illegal the first set of promises is a contract, but the second is a

void agreement."

(I) TIME OF PERFORMANCE

(1) When time is the essence of the contract: (Sec.55) "When a party to a

contract promises to do certain thing at or before a specified time, or

certain things at or before specified times, and fails to do any such thing at

or before the specified time, the contract, or so much of it as has not been

performed, becomes voidable to the option of the promisee, if the intention

of the parties was that time should be the essence of the contract."



152
(2) When time is not the essence of the contract: If it was not the intention

of the parties that time should be the essence of the contract, the contract

does not become voidable by the failure to do such thing at or before the

specified time, but the promisee is entitled to compensation from the

promisor for any loss occasioned to him by such failure.

(3) Condition for compensation when contract is voidable and goods are

accepted: "If in case of a contract voidable on account of the promisor's

failure to perform his promise at the time agreed, the promisee accepts

performance of such promise at any time other than that agreed, the

promisee cannot claim compensation for any loss occasioned by the non-

performance of promise at the time agreed unless, at the time of such

acceptance, he gives notice to the promisor of his intention to do so."

(Sec.55)

DISCHARGE OF A CONTRACT

A contract is discharged, terminated when the rights and obligations created by

it come to an end. A contract is terminated in the following ways:

(I)

BY PERFORMANCE (Sec. 37): When the parties to a contract

perform their respective promises, the contract comes to an end. Nothing

remains to be performed.

(II)

BY TENDER (ATTEMPTED PERFORMANCE): When a promisor

makes an offer of performance tender and the offer is not accepted, the

promisor is not responsible for non-performance, i.e. he is discharged

from his obligations under the contract. But he does not lose his rights



153

under the contract i.e. the promisee is not discharged from his

obligations.

(III) BY SUPERVENING IMPOSSIBILITY: Impossibility is of two types:

(A)

IMPOSSIBILITY AT THE TIME OF CONTRACT: (Sec.56)

"An agreement to do an act impossible in itself is void.": Example A

agrees with B to discover gold by magic. The agreement is void.

(B)

SUBSEQUENT OR SUPERVENING IMPOSSIBILITY

Where a contract originates as one capable of performance but later due to

change of circumstances its performance becomes impossible, it becomes void

by subsequent or supervening impossibility (section 56). In English law this is

called "Doctrine of Frustration".

Example: A and B contract to marry each other. Before the time fixed for

marriage, B becomes mad. The contract becomes void.

Supervening impossibility may arise in any of the following ways:

(1) Destruction of the subject matter:

(2) When the foundation of the contract ceases to exist: If in a contract, it is

deemed that the parties had assumed certain state of things to continue and that

state of things ceases to exist, the contract would come to an end.

(3) Change of Law: A contract which becomes illegal after it is made, becomes

void and the parties to the contract will be discharged from their respective

obligations.

(4) Death or personal incapacity: Where the contract is of personal nature the

death or incapacity of the promisor would discharge the contract.



154
(5) Declaration of war: A contract entered into with an alien enemy before the

war breaks out is either suspended or discharged after the declaration of war if it

does not aid the enemy in the pursuit of war, it is suspended and would be

performed after the war is over, otherwise it is terminated and the parties to the

contract are discharged from their respective obligations.

(IV) EXCEPTIONS TO THE PRINCIPLE OF SUPERVENING

IMPOSSIBILITY

Impossibility as a rule is no excuse for non-performance: Following are

some of the circumstances in which non-performance of a contract was held not

to be excused.

(i) Difficulty of performance: If a contract becomes difficult to perform but

not impossible the promisor would not be discharged on that account.

(ii) Commercial Impossibility would not discharge of a contract. A contract

would not be deemed to be impossible because it does not remain

profitable to the promisor or would make the promisor to incur losses.

(i) Action of a third party: If a man chooses to answer for the voluntary act

of a third person there is no reason in law or justice why he should not be

held for his inability to procure that act.

(ii) Strikes, lock-outs, civil disturbances and riots do not discharge a

contract unless there is a clause in the contract to that effect.

(iii) Partial impossibility: Where a contract is entered into for more than one

purpose, the contract would not become impossible if one of the objects

has become impossible to achieve.





155

Consequences of Supervening Impossibility

Supervening impossibility makes a contract void. The parties are discharged

from their respective obligations under the contract (Sec. 65). The party who

has received any advantages under it should restore it to the other party.

V. MUTUAL AGREEMENT

A contract is created by the parties to it, therefore, it can also come to an end by

their mutual agreement. Termination by mutual agreement may occur in any one

of the following ways.

(1) Novation: When a new contract is substituted for an existing contract, either

between the same parties or between different parties, it is called novation.

(2) Alteration: When one or more of the terms of a contract are changed it is

called alteration. In case of alteration, parties to the contract do not change.

Example: A agrees to supply to B 20 readymade pants, 10 of the size 32 and 10

of the size 34. Later on B requests A to supply all 20 pants of the size 32 only. A

agrees to it. The old contract comes to an end.

(3) Rescission: When both the parties to a contract agree to put an end to the

contract, without performing it, the contract is said to be rescinded by mutual

agreement. Example: A promises to supply to B 20 shirts on 15th January and B

promises to pay Rs 5000 on the same day after delivery, On 10th January. both

the parties agree that the contract would not be performed. Parties are said to

have rescinded the contract.

(4) Remission: When a party to a contract accepts, from the other party, a

performance lesser than what he had contracted for, he is deemed to have

remitted the remaining performance, and the contract is discharged. Example: A



156
owes B Rs.500 rupees but pays on by Rs. 200, and B accepts at in satisfaction of

the whole debt. The whole debt is discharged.

(5) Waiver: When a party to a contract abandons his right under the contract,

the other party is released from his obligations. Example: A pays Rs 1000 to B

to paint a wall for him. Later on A forbids B to paint the picture. B is no longer

bound to perform the promise.

(6) Merger: When a superior right and an inferior right coincide and meet in

one and the same person, the inferior right vanishes into the superior right. This

is known as merger. Example: A has taken a house on lease from B for 10

years. After one year A buys the house from B. His rights of a lessee vanish into

his rights of ownership and the contract of lease comes to an end.

VI. BY LAPSE OF TIME

The Limitation Act provides the time limit in which certain rights can be

enforced. If that time limit expires, the promisee cannot enforce the promisor

and promisor is discharged. Example: A owes Rs 10,000 to B. The last date for

the repayment of the loan has expired and B does not file a suit against A for

two years. B loses the right to recover the money back.

VII. BY OPERATION OF LAW

This covers the following cases: 1. Death: If a contract involves personal skill

or ability, death of the promisor would terminate the contract. 2. Insolvency:

When a person is adjudged insolvent and hands over all his property to the

official receiver/assignee, he is supposed to have the right to earn his livelihood

in the ordinary way and therefore the courts, under certain circumstances and

subject to certain conditions, discharge him from all debts which were payable



157

in insolvency but remain unpaid. He does not remain liable to pay those debts. 3.

Merger: 4. Material alteration: A change which affects or alters, in a specific

manner, the rights and liabilities of the parties is called material alteration. A

material alteration made in a written document or contract by one party without

the consent of the other, will make the contract void, e.g. an indorsee of a

promissory note/ altering the amount of note.

VIII. BY BREACH OF CONTRACT

Breach is the non-performance of the promise by the promise by the promisor. It

entitles the promisee to rescind the contract. It, therefore, operates as a mode of

discharging a contract.

BREACH OF CONTRACT AND ITS REMEDIES

As we discussed in the previous part breach of contract is a mode of discharge

of the contract. Though the obligation created by the contract comes to an end

but the aggrieved party is entitled to several remedies that are discussed in this

part. The remedies depend upon whether the breach is (a) Actual or (b)

Anticipatory or Constructive.

1. ACTUAL BREACH

Where a person fails to perform a contract when the performance is due, the

other party can hold him liable for breach i.e. he can rescind the contract and sue

for damages.

(A) At the time when performance is due: When a party to the contract fails to

perform or refuses to perform his obligations at the time when the performance

is due, he is committing a breach of contract. Example: A promised to supply B,



158
500 tables on 10th Jan. A does not supply the Tables on 10th Jan. A is guilty of

breach of contract and B becomes the aggrieved party.

(B) During the performance of the contract: When a contract is being

performed the promisor fails to perform the promisee to accept the remaining

part, it is also a breach of contract. If the promisor is not allowed to perform the

remaining part then the promisee has committed a breach of contract. Example:

The defendant Co. agreed to buy 4000 tons of goods. After 2000 tons of goods

had been delivered the company told the plaintiff that it did not require any

more goods. The company committed a breach of contract.

2. ANTICIPATORY BREACH

When a party to the contract, before the date of performance arrives, repudiates

his liability under the contract or makes the performance of the contract

impossible, there is an anticipatory (constructive) breach of contract.

Anticipatory breach may be express or implied. Example: A promises to marry

B in the month of April. But in the month of March A marries C. The marriage

between A and B becomes impossible, this is a case of anticipatory breach.

Consequences of Anticipatory Breach: If a promisor is guilty of anticipatory

breach, the promisee has got two options open to him: 1. He may treat the

anticipatory breach as the actual breach of contract and can rescind the contract.

2. He may ignore the notice or the conduct of the promisor and may wait till the

due date of performance and then if the promise is not performed he may treat it

as breach of contract. If the promisee chooses the second course of action, he

keeps the promise alive for the benefit of the promisor also and may lose his

right to sue the promisor if (i) The promisor performs the promise on the due

date: (ii) They develop circumstances which discharge the contract legally.



159

REMEDIES OF BREACH OF CONTRACT

When a contract is broken the party who suffers from such breach is entitled to

the following relieves:

1. Rescission of the contract: He would not be required to perform his

promises. Example: A, an advocate promises to plead B's case in the court of

law if B gets him (A) a table before the date of hearing. B does not deliver a

table to A. A can rescind the contract and becomes free from the obligation of

pleading B's case.

2. Suit for Damages: The injured party can also file a suit for compensation for

the loss it has suffered because of the breach of the contract. Example: A

contracts to buy B's car for Rs. 60,000 but B breaks his promise. B must pay to

A, by way of compensation, the excess, if any, of the contract price which B can

obtain for the car at the of the breach of promise.

3. Suit upon Quantum Meruit: The expression `Quantum Meruit' means `as

much as earned', i.e. reasonable remuneration for the services performed. The

rule is invoked where there is no agreement for remuneration for the work done.

Thus where a party to the contract has performed part of his promise and is

prevented by the act or conduct of the other party, from completing it, he may

sue on a Quantum Meruit. Example: A agreed to write a story for B, which B

would publish in iinstalments in his weekly magazine. B agreed to pay a lump

sum amount for the entire story. After a few instalments were published, B

abandoned the magazine. Held A could recover on Quantum Meruit for the

work done under the contract.

4. Suit for Specific performance of the contract: Specific performance means

the actual carrying out of the contract. In certain cases the court may direct the

party in default to fulfill his promise. This remedy may be granted to the injured



160
party instead of or in addition to the awarding of damages. It is usually granted

where monetary compensation is not an adequate remedy. But it would not be

granted if the court cannot supervise the contract (e.g. mining operations)or if

the contract is for personal services. Example: A, a renowned painter agrees to

paint a picture for B. Later on he refuses to do so. B pleads with the court that he

cannot get such a painting with any amount of money. Even if court is satisfied

with the plea of B, it cannot grant specific performance because A cannot be

compelled to paint a picture.

5. Suit for Injunction: Injunction is the specific performance of the negative

terms of the contract. It is an order of the court prohibiting a party from doing

something. Example: A agrees to do a musical programme at the theatre of B on

the eve of the Christmas and also agrees not to perform in any other theatre on

that day. Later on a agrees to perform in the theatre of P.B cannot enforce a

specific performance of A's musical programme in his theatre. (because court

cannot effectively supervise it) but he can ask the court to restrain A from

performing in P's theatre.

RULES REGARDIG DAMAGES

Damages under Contract act are awarded by way of compensation for loss to the

plaintiff only and not by way of punishment to the guilty party. Following are

the rules for the damages:

(1) When a contract is broken, only those damages "which naturally arose in

the usual course of things from such breach" can be recovered. These are
known as general or ordinary damages.

(2) In certain cases even special damages can also be recovered. Special

damages are those `which the parties knew, when they made the contract
to be likely to result from the beach of it.' (Sec. 73)



161

(3) Compensation for the breach of quasi contract would be the same as the

compensation for the breach of contract.

(4) "... In estimating the loss of damage, arising from a breach of contract, the

means which existed of remedying the inconvenience caused by the non-
performance of the contract must be taken into account".

(5) Under a contract for the sale of goods the measure of damages is the

difference between the contract price and the market price at the date of
breach.

(6) Damages are not awarded with a view to punishing the defendant except

(a) for a breach of promise to marry and (b) for a wrongful dishonour by
the banker of cheque of the customer. These are known as Exemplary or
Vindictive Damages.

(7) In case the court finds that though the defendant has been guilty of a

breach of contract, the breach has not caused any appreciable loss to the
plaintiff, it awards only nominal damages, like costs of the suit etc.

(8) Even if the parties agree about damages for breach of contract, only actual

damages, not exceeding the agreed amount, can be recovered. These are
known as liquidated damages (Sec.74)

(9) Plaintiff would not be denied damages for the loss suffered on the ground

that the assessment of damages is difficult. (Sec.75).

(10) Mitigation of loss: it is the duty of the plaintiff to take steps to minimize

the loss resulting from breach.

(11) Cost of suit: The plaintiff can recover not only damages for the loss

sustained but also costs of getting the decree of damages.

(12) Interest as damages: As regards breach of contract of sale, the court is

empowered to award interest, at such rate as it thinks fit, on the amount of
the price.

KINDS OF DAMAGES

(1)

General or Normal Damages: The amount of general or ordinary

damages is restricted to only that loss which arises:(a) naturally and (b) in the
usual course of things from such breach (Sec. 73)

(2) Special

Damages

means loss which would result not in the ordinary

course, but because of special circumstances and the parties know, at the time



162
when they entered into the contract, that this is likely to result from the breach of
it.

(3) Liquidated

Damages:

(Sec. 74) "When a contract has been broken, if a

sum is named in the contract as the amount to be paid in case of such breach, or
if the contract contains any other stipulation by way of penalty, the party
complaining of the breach is entitled whether or not actual damage or loss is
proved to have been caused thereby, to receive from the party who has broken
the contract reasonable compensation not exceeding the amount so named or, as
the case may be, the penalty stipulated for".
Example: A contracts with B to pay B Rs.10000, if he fails to pay B Rs. 9000 on
a given day. A fails to pay B Rs.9000 on that day. B is entitled to recover from
A such compensation, not exceeding Rs. 10000, as the court considers
reasonable.

(4) Vindictive or exemplary Damages: As explained earlier, damages for
breach of contract are granted to compensate for the loss suffered by the plaintiff
and not with a view to punish or penalize the wrong done by the defendant.
Hence the damages granted are not vindictive, exemplary or `punitive'.
However there are following two exceptions to this general rule.
(i)

In case of a breach of promise to

marry.

(ii)

In case a banker,

wrongfully, dishonouring the cheque of a customer having sufficient funds to his
credit. The rule of damages'. "A stipulation for increased interest from the date
of default may be a stipulation by way of penalty" [Sec.74].

(5) Nominal Damages: Where the aggrieved party does not suffer any monetary
loss, sometimes the Courts grant a nominal amount like cost etc. just to establish
that the plaintiff has won the case against the defendant.



163

LESSON 4

CONTRACT OF AGENCY

DEFINITION OF AGENT AND PRINCIPAL

(Sec. 182) "An agent is a person employed to do any act for another or to

represent another in dealing with third persons. The person for whom such act is

done or who is so represented, is called the principal."



Test of Agency: The true test of agency is the authority that one person

possesses to create contractual relationship between the person he is

representing and the person to whom he represents. Where a person is in the

habit of advising another in business dealings he does not become the agent of

the other.

Agent and Servant

A servant is a person who acts under the direct control and supervision of his

master while an agent does not. "A principal has the right to direct what the

agent has to do; but a master has not only that right but also the right to say how

it is to be done" An agent is, therefore, sometimes described as `Superior

Servant. An agent binds the principal with the third parties but a servant does

not create relations between his master and third persons.

Who may employ agent?

(Sec. 183), "Any person who is of the age of majority according to the law to

which he is subject, and who is of sound mind, may employ an agent."

"Whatever a person can do personally he can do through an agent." Thus a

guardian of a minor can appoint an agent for the minor.



164
Who may be an agent? A minor or even a person of unsound mind can act as

agents but they would not be responsible to the principal or to the third parties in

cases where a person competent to contract would have been responsible.

Consideration for the contract of agency: (Sec. 185) "No consideration is

necessary to create an agency." Principal's agreement to be represented by the

agent is deemed to be sufficient detriment to support the promise by the agent to

act as such and be liable to the principal for negligence.

CREATION OF AGENCY

The relationship of principal and agent may be created in any of the following

ways:

(i) BY EXPRESS AGREEMENT: "The authority of an agent may be

express or implied." (Sec. 186) "An authority is said to be express when it
is given by words spoken or written." (Sec. 187): Example: A asks B to
sell his cow for a commission of 10% on sales. B agrees to do so .
Agency has been created. The agreement need not be in writing. But in
certain cases, law requires the agreement to be in writing, e.g. for sale or
purchase of land, the law requires the agent to be appointed by executing a
formal power of attorney.

(2) BY IMPLIED AGREEMENT Sec. 187: "... An authority is said to be

implied when it is to be inferred from the circumstances of the case, and things

spoken or written, or the ordinary course of dealing..."

Example: A owns a

shop. The shop is managed by B, and he is in the habit of ordering goods from C

in the name of A for the purposes of the shop, and of paying for them out of A's

funds with A's knowledge. B has an implied authority from A to order goods

from C in the name of A for the purposes of the shop.



165

(i) Agency by estoppel (Sec. 237): "When an agent has without authority done

acts or incurred obligations to third persons on behalf of his principal, the

principal is bound by such acts or obligations if he has, by his words or conduct,

induced such third persons to believe that such acts and obligations were within

the scope of the agent's authority." Example: A starts manufacturing plastic

products. A, B and C are sitting together. B in the present of A tells C that A has

appointed him (B) as selling agent of his product. A does not contradict this

statement, though he had not appointed him as his agent. Later on C enters into a

contract with B on the presumption that B is A's agent. A would be bound by

this transaction. A would be precluded from denying that B is his agent.

(ii) Agency by holding out: The principle of holding out is a part of the law of

estoppel. But agency by holding out requires some positive or affirmative

conduct by the principal. Example: A sends his servant to buy goods from B on

credit. B gives the goods to A's servant and A pays for them. Later on A's

servant, without A's asking for it, buys goods from B on A's credit and runs

away. A would be liable to pay for the goods, thought a servant is not an agent,

but by paying for the credit purchases made by his servant, A held out that his

servant was his agent also and as such he would be liable for the purchases made

by his servant.

(iii) Agency of Necessity: If a person protects the property or interest of another

where such property or interests are in imminent danger and the instructions of

the owner cannot be obtained, the former would be deemed to be an agent of the

latter so as to make the latter liable for whatever he has done provided the

former has acted bonafide in the interests of the latter. The principle of necessity

also extends to cases where an agent exceeds his authority if the following

conditions are fulfilled (i) The agent was not in a position to communicate with



166
the principal. (ii) The agent takes reasonable and necessary course in the

circumstances. (iii) The agent acts bonafide. Example: A sends some bananas to

B with the instructions that B should send them to C. When B takes delivery of

the bananas, he finds that the bananas are not in a condition to sustain the

journey to C's place and would perish before reaching. B, therefore, sells them

at the best possible price. A would be bound by this sale under agency by

necessity.

In cases of accident and emergency a master of a ship can sell or pledge

the goods in order to save their value and such sale or pledge would be binding

on the owners of the cargo.

Husband and Wife: A wife can bind the husband for the contracts she enters

into for the purchase of household necessities suiting to the couples joint style

of living provided they are living together and the wife is the in-charge of

domestic establishment and the husband has not made reasonable allowance to

the wife for her needs. Example: H and W are husband and wife respectively. W

chooses to live separately and buys goods on credit from A. On her failure to

pay for the purchases A cannot recover the money from H because they are not

living together.



However, a husband can escape the liability if he can prove that (i) he

had warned the tradesman from supplying the goods on credit to his wife; (ii) he

had already supplied sufficient articles in question to his wife (iii) he had

supplied sufficient means to his wife for the purchase of articles in question. But

if the wife is deserted by her husband and thus forced to live separately, she may

of necessity become agent of her husband and can pledge her husband's credit

for necessaries to the extent a reasonable maintenance makes it necessary.



167

(3) AGENCY BY RATIFICATION: A person may become another's agent

after having done some work for the latter, if the latter ratifies the act. When a

person adopts or accepts an act done on his behalf but without his authority he is

said to have ratified it. Example: A, without authority, buys goods for B.

Afterwards B sells them to C on his own account; B's conduct implies a

ratification of the purchase made for him by A.

Implications of Ratification: (i) Ratification relates back to the date of the act

It is tantamount to prior authority. This means that the agency comes into

existence not from the time when the act is ratified but from the time when the

act was done. i.e. (Ratification is equivalent to an antecedent authority).

(ii) No Authority for future: The ratification of an act done without authority

does not confer authority to do similar acts in future.

CONDITIONS OF A VALID RATIFICATION

Ratification is enforceable only when the following conditions are fulfilled.

(1) Must contract as agent: The agent must contract as agent for a principal in

contemplation; or the agent should not make the contract for himself.

(2) Only named Principal can ratify: Only that principal who was named or

was identifiable at the time of the contract, can ratify the contract. He can do

so even if the agent never intended that he should do so.

Example: A make a contract with B on behalf of his uncle, D. Later on C, A's

elder brother want to have the benefit of the contract and wants to ratify the

same. C cannot do so. D, when comes to know of the contract, wants to ratify



168
the same; he can do so and enjoy the benefit of the contract even if A does not

want it.

(3) The principal should be in existence: Mere contemplation at the time of

the contract is not sufficient. If the principal was not in existence at the time

of the contract, he cannot ratify such contract.

(4) The Principal must be competent to contract at the date of the contract as

well as at the date of ratification. Thus a minor cannot ratify a contract made

on his behalf after becoming a major.

(5) The principal must have full knowledge of the material facts (Sec. 198):

"No valid ratification can be made by a person whose knowledge of the facts
of the case is materially defective."

(6) The principal must ratify the whole transaction (Sec. 199).

(7) The principal must ratify the contract within a reasonable time after the

contract is made.

(8) The act to be ratified should not be void or illegal though ratification can

be made of voidable contracts or even of tortuous acts.

(9) Ratification of unauthorized act cannot injure third person.

(10) Ratification by Govt: Acts done by public servant in the name of the

Government may be ratified by subsequent approval in the same manner as
private transaction.

EXTENT OF AGENTS AUTHORITY

It is necessary to know all dimensions of his (agent) authority. They are as

follows:

(A) Actual Authority: Actual authority is one which is conferred on the

agent by the principal. It may be express or implied. (1) Express Authority: An

authority is said to be express when it is given by words spoken or written (Sec.



169

187). (2) Implied Authority: (i) An authority is said to be implied when it is

inferred from the circumstances of the case.(Sec. 187) (ii) An agent having

authority to do an act has authority to do every lawful thing which is necessary

in order to do such act. (Sec. 188)

(B) Ostensible or Apparent Authority: Apparent or ostensible authority is

that authority which an agent appears to be possessing though in fact he may not

have.

(C) Authority in Emergency: "An agent has authority, in an emergency, to do

all such acts for the purpose of protecting his principal from loss as would be

done by a person of ordinary prudence, in his own case, under similar

circumstances." (Sec. 189).

DELEGATION OF AUTHORITY BY AGENT

"An agent cannot lawfully employ another to perform acts which he has

expressly or impliedly undertaken to perform personally..." sub-agent may not

enjoy the confidence of the principal ["A subagent is a person employed by, and

acting under the control of, the original agent in the business of the agency"

(Sec.191).

Exceptions: In the following circumstances delegation made by an agent to sub-

agent would be proper: (1) Nature of agency: (2) Custom of Trade: Where it

is a custom of trade that an agent appoints a sub-agent.(3) Ministerial Acts:

Where the acts to be done are purely ministerial and do not involve the exercise

of discretion, or personal or professional skill. (4) Express Delegation: Where

the principal has expressly permitted delegation. (5) Implied Permission:

Where the principal impliedly permits delegation i.e. from act or conduct it may



170
be inferred that he has allowed delegation of authority. (6) In emergency: In

case of emergencies an agent can always delegate the authority to a sub ?agent.

DUTIES OF AN AGENT

(1)

To follow principal's directions or customs:

(2)

Skill and diligence to work:

(3)

To render proper account: (Sec. 213): "An agent is bound to render

proper accounts to his principal on demand." He should always be ready

to produce them to the principal.

(4)

To communicate with the principal (Sec. 214)

(5)

Not to deal on his own account: (Sec. 215)

(6)

To pay sums received for principal

(7)

Not to delegate authority (Sec. 190)

(8)

On Principal's death or insanity (Sec. 209)

RIGHTS OF AN AGENT

(1)

Right to Remuneration: Every agent is entitled to receive the
remuneration agreed upon with the principal.

(2)

Right of retainer (Sec. 217)

(3)

Right of Lien (Sec. 221)

(4)

Right of indemnity



171

RIGHTS AND DUTIES OF PRINCIPAL TOWARDS AGENT

RIGHTS OF PRINCIPAL

(1) He can enforce the various duties of an agent. (2) He can recover

compensation for any breach of duty by the agent. (3) He can forfeit agent's

remuneration where the agent is guilty of misconduct in the business of

agency. (4) Principal is entitled to any extra profit that the agent has made

out of his agency. This includes illegal gratification, if any. (5) Principal is

entitled to receive all sums that the transactions, entered into, by the agent,

on behalf of the principal were void or illegal.

DUTIES OF PRINCIPAL

1. To Pay Remuneration:

2. Duty to Indemnify:

3. Compensation for injuries:

4. Should not prevent the agent from earning remuneration

PRINCIPAL'S LIABILITIES TO THIRD PARTIES FOR THE ACTS OF

THE AGENT

(1) Liability for acts done by agent within authority

(2) Ratification of acts beyond the scope of his authority

(3) When an agent commits fraud or misrepresentation

Liability for tort: If an agent commits a tort in the course of and within the

scope of his agency, the principal may in certain cases be liable for the same.

(1) Notice given to agent as notice to principal (Sec. 229)

(2) Liability under the principle of estoppel

(3) Liability when his name is not disclosed (Unnamed principal)



172
(4) Liability when agent does not disclose his agency (undisclosed

principal)

AGENT AND THIRD PARTIES

"In the absence of any contract to that effect, an agent cannot personally enforce

contract entered into by him on behalf of his principal nor is he personally

bound by them...'



If there is no contract providing for, or relieving the agent from, personal

liability the agent would be liable in the following cases:

(1) Foreign Principal:
(2) Unnamed Principal:
(3) Undisclosed Principal:
(4) Incompetent Principal:
(5) Where the agent exceeds his authority:
(6) Where agent's authority is coupled with interest:
(7) Custom of Trade:
(8) Money received by mistake or fraud:

TERMINATION OF AGENCY

The contract of agency would come to an end in any of the following

circumstances:

(1) By Agreement:

(2) By Revocation by the principal:

(i) If the authority has not been exercised: (ii) Revocation may be

expressed or implied (Sec. 207) (iii) Reasonable Notice of

revocation: (iv) Compensation. If the principal revokes the agency,

without sufficient cause, he would have to compensate the agent

for the premature termination. (Sec. 205) (v)Agency is irrevocable

in the following cases.



173

a.

Agency coupled with interest:

b.

Where agent has partly exercised his authority

c.

Where an agent has incurred personal liability

(3) Renunciation by the Agent:

(4) Completion of business;

(5) Death or Insanity:

(6) Insolvency of the principal:

(7) Expiration of Time:

(8) Destruction of the subject matter:

(9) Dissolution of a company:

(10) Principal or agent becoming alien enemy:



174
LESSON 5

PARTNERSHIP ACT 1932

The law relating to partnership is contained in the Indian partnership Act, 1932.

The Act came into force with effect from October 1, 1932. Prior to enactment of

the aforesaid Act, partnership business used to be governed by the Indian

Contract Act, 1872.

Section 4 of the Indian Partnership Act, 1932 defines `partnership' as

follows: "a business carried on by all or any of them acting for all."

Essential elements of partnership:

(1) Association of two or more persons;

(2) Existence of a contract;

(3) Carrying on a business;

(4) Sharing of profits; and

(5) Prevalence of mutual agency.

But a partnership firm cannot create another partnership as it does not enjoy the

status of the artificial legal person. There must exist a contract between persons

who have agreed to form partnership. Such a contract may, however, be either

express or implied, written or oral.

Partnership Deed : Partnership Deed is the document that defines the rights

and obligations of partners. Besides names, address and occupation of partners

it lays down the duration of partnership, nature of business, profit sharing ratio,

right to interest, salary, commission etc.

REGISTRATION OF FIRMS

The registration of partnership firm is discretionary. The provisions

relating to registration of partnership firm are contained in Chapter 7, Sections
56 to 71 of the partnership Act.



175

Effect of Non-registration (Sec. 69)

An unregistered firm and its partners suffer from the following disabilities:

(1)

No Suit against other partners and firms

(2)

No suit against third parties

(3)

No claim of set off

DURATION OF PARTNERSHIP

Partnership may, from the point of view of its duration, be categorized into the

following two classes: (1) Partnership for a fixed term or particular partnership

(2) Partnership at will.

KINDS OF PARTNERS

There may be different kinds of partners in a partnership firm. The important

classification of partners is given below:

(1) Actual or active partners,
(2) Dormant or sleeping partner,
(3) Nominal partner,
(4) Partner in profits only,
(5) Sub-partner,
(6) Partner by estoppel or by holding out.



(1) Actual or active partners: Partners actively engaged in the conduct of

the business are known as `active' or `actual' or ostensible partners.

(2) Dormant or sleeping partner: The nominal partner is one who lends his

name to the partnership firm without any real interest in terms of investing

money in the firm or sharing in profits.

(3) Nominal partner: the nominal partner is known to the outsiders and does

not share the profits of the firm.

(4) Partner in profits only: A person who does not want to take risk of loss

may agree to become a partner in profits only.



176
(5) Sub-partner: When a partner agrees to share his share of profit in a

partnership firm with the outsiders, such an outsider is called a `Sub-

partner'.

(6) Partner by estoppel or by holding out: If a partner, by his words or

conduct holds out to another that he is a partner, he will be stopped from

denying that he is not a partner. Such a partner neither contributes any

capital nor participates in the management. He is only liable to third

parties.

MINOR AS A PARTNER

According to Indian Contract Act an agreement of a minor is void, as void, as

such he cannot enter into an agreement of partnership. Section 30 of the

Partnership Act provides that a minor may be admitted to the benefits of

partnership with the consent of all the partners.

Rights of Minor Partner

A minor admitted to the benefits of a Partnership has the following rights:

(1) Right to share the profits. (2) Right to have the access to do the inspection

(3) Right to file a suit for accounts or demand his share of property or profits.

(4) Right to exercise option on attaining the age of majority, whether or not to

continue in the firm.

Liabilities of Minor Partner

1. The liability of a minor is limited to the extent of his share in the firm and

therefore, unlike other partners, he is not personally liable.

2. If the firm is declared insolvent his share in the firm vests in the official

receiver or assignee but a minor cannot be declared insolvent.





177

Rights, Duties and Liabilities of Partners

RIGHTS

(1)

Right to take part in the conduct of business

(2)

Right to be consulted

(3)

Right of Access to the books

(4)

Right to share profits

(5)

Right to interest on capital

(6)

Right to interest on advances

(7)

Right to indemnity

(8)

Right to act prudently in emergency

(9)

Right to give consent for admission of a new partner

(10)

Right to retire

(11)

Right to carry on competing business after retirement.

DUTIES

(A) QUALIFYING

(1) To attend his duties diligently

(2) To work without remuneration

(3) To contribute to losses

(4) To indemnify for willful neglect

(5) To use firm's a property exclusively for the firm

(6) To account for private profits [Sec.16(a)]

(B) OTHERS

(1) Duty to carry on business for the common advantage

(2) To indemnify for loss caused by fraud

(3) To give full information

(4) To render true accounts

(5) To be just and faithful









178
LIABILITIES

(1) Liability of partner for acts of the firm: Every partner is liable, jointly

with all the other partners and also severally, for all acts of the firm done while

he is a partner

(2) Liability of the firm for wrongful acts of the partner: Where, by the

wrongful act or omission of a partner acting in the ordinary course of the

business of a firm, or with the authority of his partners, loss or injury is caused

to any third party, or any penalty is incurred, the firm is liable therefore to the

same extent as the partner (Section 26).

(3) Liability of the firm for misapplication by partners: (i) When a partner

acting within his apparent authority receives money or property from a third

party and misapplies it, or (ii) A firm in the course of its business receives

money or property from a third party, and the money or property is misapplied

by any of the partners while it is in the custody of the firm, the firm is liable to

make good the loss (Sec. 27).

(4) Liability for the loss caused by his own fraud

(5) Liability for the loss caused by his own willful neglect.

AUTHORITY OF A PARTNER

(A)

EXPRESS AUTHORITY

(B)

IMPLIED AUTHORITY

"The act of partner which is done to carry on, in the usual way, business of the

kind carried on by the firm, binds the firm". Thus the authority of a partner to

bind the firm is called `Implied authority".

(C)

AUTHORITY IN AN EMERGENCY: A partner has authority in an

emergency to do all such acts for the purpose of protecting the firm from loss as



179

would be done by a person of ordinary prudence, in his own case, acting under

similar circumstances, and such acts bind the firm.

RECONSTITUTION OF A FIRM

A change in the constitution of the firm occurs when a new partner is admitted or

an old partner retires or dies. The partnership is reconstituted on:

(1) Admission

(2) Retirement

(3) Expulsion

(4) Insolvency

(5) Death of a partner

(6) Transfer of interests by a partner.

DISSOLUTION OF A FIRM

Dissolution of a firm means an end of the firm. The Indian Partnership Act

distinguishes between:

(a)

Dissolution of firm, and

(b)

Dissolution of partnership.


Section 39 provides that the dissolution of partnership between all the partners

of a firm is called the "dissolution of the firm".

MODES OF DISSOLUTION

A firm may be dissolved in any of the following modes

(I) BY AGREEMENT (Sec. 40) (II) BY NOTICE (Sec. 43) (III) ON THE

HAPPENING OF CERTAIN CONTINGENCIES (Sec. 42)

1. Expiry of fixed term
2. Completion of adventure or undertaking
3. Death of a partner
4. Insolvency of a partner





180
(IV) Compulsory (Sec 41): A firm is dissolved in the following

circumstances:



(1) Insolvency of all partners or all except one (2)Business becoming

unlawful

(V)

DISSOLUTION BY THE COURT (Sec 44): Section 44 provides that

the dissolution of a firm may take place on a suit filed by a partner on

any of the following grounds, namely:

(1)

Insanity of a partner [Section 44(a)]

(2)

Permanent incapacity [Section 44(b)]

(3)

Misconduct [Section 44(c)]

(4)

Persistent breach of agreement [Section 44(d)]

(5)

Transfer of interest [Sec.44 (e)]

(6)

Continuous losses[Section 44(f)]

(7)

Just and equitable causes [Sec.44(g)]

CONSEQUENCES OF DISSOLUTION

The consequences of dissolution are as follows:

(1)

Continuous liability if fails to give a public notice [Sec. 45]

(2)

Continuous authority of partners for purposes of winding up [Sec.
47]

(3)

Right to have the business wound up [Sec. 46]

(4)

Right to return of premium [Sec. 51]

(5)

Rights where partnership contract is rescinded for fraud or
misrepresentations [Sec. 52]

(6)

Rights to impose restrictions [Sec. 53]

(7)

Liability to share personal profits [Sec. 50]



SETTLEMENT OF ACCOUNTS UPON DISSOLUTION

(1)

Treatment of goodwill

(2)

Meeting losses [Sec.48 (a)]

(3)

Order of applications of assets [Sec.58(a)]

(4)

Losses arising from insolvency of a partner

(5)

Payment of firm's debts and separate debts [Sec. 49]





181

PUBLIC NOTICE

The Partnership Act requires that a public notice must be given in each of the

following cases: (i) On Minor Attaining Majority: (ii) Retirement of a partner:

(iii) Expulsion of a partner: (iv) Dissolution of the firm:



182
LESSON 6

SALE OF GOODS ACT 1930

The law defining their respective rights and obligations is contained in the

Indian Sale of Goods Act, 1930. Before 1930, law relating to sale of goods was

contained in the Indian Contract Act, 1872. The departures made by the Sale of

Goods Act are in regard to the consideration, implied conditions and warranties

etc.

ESSENTIALS OF A CONTRACT OF SALE OF GOODS

"A contract of sale of goods is a contract whereby the seller transfers or agrees

to transfer the property in goods to the buyer for a price." [Sec. (4) 1]. Important

features of a contract of sale

(1) Two Parties:

(2) Mutual Consent: Just the presence of two parties is not sufficient. The

parties must agree on the transfer of property.

(3) Transfer of Property: What a contract of sale stipulates is the transfer

of property i.e. the ownership of the goods and not the possession of the

goods.

(4) Goods: Goods means every kind of movable property other than

actionable claims and money. But it includes stock and shares, growing

crops, grass and things attached to or forming part of the land which are

agreed to be severed before sale or under the contract of sale. [Sec. 2(7)].

Since the price of the goods is expressed in terms of the money, money

itself cannot be bought, and hence, money is not considered as goods.

(5) Price: Under a contract of sale, property in the goods is transferred to the

buyer for a price. Price is the money consideration for the goods.



183

(6) Varied requirement as to delivery and payment: The contract may

provide for the immediate delivery of goods or immediate payment of

the price or both,

(7) Requires no formalities:

(8) Absolute or Conditional: An absolute contract of sale is technically

called a `sale'. Thus "where under a contract of sale the property in the

goods is transferred from the seller to the buyer, the contract is called a

sale.."[Sec. 4 (3)]. Thus a contract of sale is a generic term including

`Sale' as well as `an agreement to sell'

Contract

of

Sale











Sale





Agreement to sell

DISTINCTION BETWEEN `SALE' AND `AGREEMENT TO SELL'

(1) Transfer of Property: In a sale the buyer becomes the owner immediately

(i.e. as soon as the contract of sale is made). But in an agreement to sell the

seller continues to be the owner unless it becomes a sale by the expiry of certain

time or by the fulfillment of the conditions agreed upon.

(2)'Jus in rem' and `Jus in Personam: A sale creates `Jus in rem' i.e. rights

against the goods. (3) Risk of Loss: Risk prima facie passes with property (Sec.

26). The buyer would bear the risk of loss, even if goods are in the possession of

the seller. But in case of an agreement to sell the ownership remains with the

seller and as such the seller would be liable for the loss,

(4) Consequences of default:

a. When the buyer commits the default and does not pay the price of the

contract is a `sale. The seller can sue for the price, even if the goods are in



184
the possession of the seller himself. But in `an agreement to sell he cannot

sue him (buyer) for the price of the goods even if the goods happen to be in

the possession of the buyer.

b. When the seller commits default and refuses to sell the goods or sells the

goods to some other person, then if the contract is a sale the buyer can

recover his goods, even from a second buyer (except under certain

circumstances) and sue the seller for breach of contract as well, but in case

the contract is only an `agreement to sell ` the buyer can only sue the seller

for the breach of contract but cannot recover the goods.

(5)

Where the buyer becomes insolvent: Where the contract is a `sale' the

seller would have to part with the goods and can receive in buyer's insolvency,

only ratable dividend for the price due. An agreement to sell, the seller may

refuse to deliver the goods to the official receiver/assignee of the buyer's

property unless he is paid the full price.

(6)

Insolvency of the seller: If it is a sale, the buyer can recover it from the

official receiver/assignee. But in an agreement to sell buyer cannot recover the

goods even if he has paid the price in advance.

SALE DISTINGUISHED FROM OTHER TRANSACTIONS

(1) Sale, barter and exchange : If the goods are exchanged for goods only it is

called `barter' and not sale. If money is exchanged for money (say $ 10 for

Rs.450 ) it is called `EXCHANGE' only. But where goods are exchanged

for a money consideration, it is called a sale. If the consideration consists

partly of money and partly of goods, it would be a contract of sale.



185

(2) `Hire purchase' and `Agreement to sell' : In a contract of sale there is an

agreement to buy but in `hire purchase', hirer has the option to buy the

goods if he pays all the installments. Hence if he does not exercise his

option, the owner cannot sue for breach of contract but can take his goods

back. In an agreement to sell, if the buyer refuses to buy the goods the seller

can sue him for breach of contract.

(3) Sale and contract for work and Labour : If the essence of the contract is

the rendering of service and exercise of skill it is a contract of work and

labour, though goods are also delivered under the contract. But if the

delivery of goods is the essence of the contract although some labour on the

part of the seller may be necessary, it would be a contract of sale.

KINDS OF GOODS

The goods are classified by sec 6, as follows:

(A) Existing goods: Existing goods are those which are owned or

possessed by the seller at the time of the contract of sale.

Existing goods may be further classified into (i) specific; (ii) ascertained; and

(iii) unascertained. "Specific goods means goods identified and agreed upon at

the time a contract of sale is made" [sec.2(14)]. Ascertained goods are those

which are identified and agreed upon after a contract of sale is made. The goods

which are only defined by description and not specifically identified at the time

a contract of sale is made are called unascertained goods.

(B) Future Goods: Future goods means goods to be manufactured or

produced or acquired by the seller after the making of the contract of sale."

[Sec.2(6)], Example: A agrees to sell to B the entire crop of Onion, that his land



186
would yield, at Rs.10,000 per ton. This is a contract for the sale of future goods

because goods are still to be produced.

(C) Contingent goods: Contingent goods are those the acquisition of which

by the seller depends upon a contingency which may or may not happen [Sec.

6(2)]. Example: A agrees to sell the cow to B if A inherits C's property

including the cow. C donates the entire property to a trust. The contract becomes

void.

PERISHING OF GOODS

After a contract of sale is made the subject matter of the contract may be

destroyed or it may be found that the subject matter had already been destroyed

before the date of making the contract, the effect of the two cases would be

different.

(A) Goods perishing before the contract of sale

(Sec.7) provides, "where there is a contract for the sale of specific goods the

contract is void if the goods without the knowledge of the seller have, at the time

when the contract was made, perished or become so damaged as no longer to

answer to their description in the contract.'

(B) Goods perishing after the contract of sale is made

(i) Perishing before sale but after an agreement to sell: "unless otherwise

agreed, the goods remain at the seller's risk until the property therein is

transferred to the buyer..."

(ii) Goods perishing after sale: In sale, goods are destroyed after sale. The

loss arising from the destruction or damage of the goods would be borne by the

buyer.(Sec.26)





187

THE PRICE

(A)

Meaning: "Price means the money consideration for a sale of goods"

[Sec.2(10)].

(B)

How to fix the price?

(1)

By the contract: The price is a contract of sale may be fixed by the

contract between the parties (Sec69).

(2)

In an agreement: The price may be left to be fixed in manner thereby

agreed (sec.9). Whatever manner of fixing the price has been agreed

upon by the parties to the contract, that would be recognized by law.

(3)

Valuation by third party: The price may be left to be fixed by a third

party.

(4)

By the course of dealings: Where the price is neither expressed in the

contract nor any manner of fixing the price is agreed, the price would be

determined by the course of dealings between the parties.

(5)

Reasonable price: What is a reasonable price is question of fact

depending on the circumstances of each case. Generally the market price

on the date of supply is taken to be a reasonable price.

(C)

Earnest or deposit: The money so paid is called earnest or deposit. If

buyers commit a breach of the contract and seller files a suit for

damages, the amount of damages shall be reduced by the amount of

earnest money forfeited.

(D)

Taxes imposed after the contract of sale [sec.64 (A)]: Any tax, is

imposed or increased after making of the contract of sale of such goods,

then the seller can recover the same from the buyer.

(E)

Payment of price a concurrent condition with that of delivery

(sec.32): The seller shall be ready, and willing to give possession of the



188
goods to the buyer in exchange for the price, and the buyer shall be ready

and willing to pay the price in exchange for possession of the goods."

TIME AS ESSENCE OF CONTRACT

A contract of sale of goods may stipulate the time for the payment of the price

and also the time for delivery of goods.

(1) Regarding payment: "unless a different intention appears from the

terms of the contract, stipulations as to time of payment are not

deemed to be the essence of a contract of sale."

(2) Regarding delivery: as regards stipulation relating to the time of

delivery of goods. (Sec.11).



189

LESSON 7

LAW OF INSURANCE

The contract of insurance is called an aerator contract because it depends upon

an uncertain event. Lord Mansfield described insurance as "a contract on

speculation."

FUNDAMENTAL PRINCIPLES OF INSURANCE: (i) good faith, (ii)

insurable interest, (iii) indemnity, (iv) mitigation of loss, (v) attachment of risk,

(vi) causa proxima.

GOOD FAITH: A contract of insurance is a contract, uberrimae fidei, a

contract based on utmost good faith and if the utmost good faith is not observed

by either party the contract may be avoided by the other.

INSURABLE INTEREST: The assured must have an actual interest called the

insurable interest, in the subject-matter of the insurance; either he must own part

or whole of it, or he must be in such a position that injury to it would affect him

adversely.

INDEMNITY: Excepting life assurance and personal accident and sickness

insurance, a contract of insurance contained in a fire, marine, burglary or any

other policy is a contract of indemnity.

MITIGATION OF LOSS: In the event of some mishap to insured property, the

owner (the insured) must act as though he were uninsured, and make every

effort to preserve his property.

RISK MUST ATTACH: A contract of insurance can be enforced only if the

risk has attached.



190
CAUSA PROXIMA: Make the insurer liable for loss, such loss must have been

proximately caused by the peril insured against. Causa proxima non remota

spectator.

CONTRACT OF INSURANCE ONE FROM YEAR TO YEAR: The

general rule is the except in the case of life assurance a contract of insurance is a

contract from year to year only,

PREMIUM: The premium is the price for the risk undertaken by the insurer. It

is the consideration for the insurance.

DAYS OF GRACE: The days of grace are the days allowed by the insurance

company after the expiry of the stipulated period of insurance during which the

assured can pay the premium in order to continue or to renew the policy of

insurance.

POLICY: The policy is a formal and enforceable stamped document signed and

issued by the insurance company embodying the terms of the contract between

the parties.

INTERIM RECEIPT, CERTIFICATE OR COVER NOTE: A cover note or

interim certificate is a document which the insurance company, on receiving the

proposal, may issue pending the execution of a policy or the final decision of the

directors as to acceptance or rejection of the proposal.

RE-INSURANCE: Re-insurance is a contract which insures the thing originally

insured, and by which an insurer is to be indemnified against any loss which he

may sustain by reason of being himself compelled to pay the assured under the

original contract of insurance.



191

DOUBLE INSURANCE: When the same subject-matter is insured with two or

more insurers and the total sum insured exceeds the actual value of the subject-

matter, it is known as double insurance and it amounts to over-insurance.

SUBROGATION: The right of subrogation is a necessary corollary of the

principle of indemnity and is essential for its preservation.

CONTRIBUTION: Contribution is the right of the insurers to claim from

others some payment towards the loss, and arises only where there is double

insurance.

MARINE INSURANCE

The law relating to marine insurance is found in the Marine Insurance Act,

1963. A contract of marine insurance is an agreement whereby the insurer

undertakes to indemnify the assured, in the manner and to the extent thereby

agreed, against marine losses, that is to say, the losses incidental to marine

adventure (Sec.3). There is a marine adventure when (i) any insurable property

is exposed to maritime perils; (2) the earnings or acquisition of any freight,

passage money, commission, profit or other pecuniary benefit, or the security for

any advances, loans, or disbursements is endangered by the exposure of

insurable property to maritime perils; (3) any liability to third party may be

insured by the owner of, or other person interested in or responsible for,

insurable property by reason of maritime perils [Sec. 2(e)].

Maritime Perils: means the perils consequent on, or incidental to, the

navigation of the sea, that it to say, perils of the seas, fire, war perils, pirates,

rovers, thieves, captures, seizures, restraints and detainments of princes and

peoples, jettisons, barratry and any other perils which are either of the like kind

or may be designed by the policy [Sec. 2(e)].



192
TYPES OF POLICIES

VOYAGE POLICY: Where the contact is to insure the subject-matter "at and

from" or from one place to another or others, the policy is called a voyage

policy.

TIME POLICY: Where the contract is to insure the subject-matter for a

definite period of time, the policy is called a time policy.

VALUED POLICY: A valued policy is a policy which specifies the agreed

value of the subject-matter insured.

UNVALUED POLICY: An unvalued policy is a policy which does not specify

the value of the matter insured, but subject to the limit of the sum insured, leaves

the insurable value to be subsequently ascertained (Sec. 30).

FLOATING POLICY: A floating policy is a policy which describes the

insurance in general terms, and leaves the name or names of the ship or ships

and other particulars to be defined by subsequent declaration.

WAGER OR HONOUR POLICY: It is a policy in which the assured has no

insurable interest or the insurer or underwriter is willing to dispense with the

proof of interest.

INSURABELE INTEREST: The person who effects an insurance, or issues

instructions for effecting it, must have an insurable interest in the subject-matter.

The assured must have insurable interest at the time of the loss thought he

may not have been interested when the insurance was actually effected.

INSURABLE VALUE: Insurable value is the amount of the valuation of the

insurable interest for the purpose of insurance.



193

DISCLOSURE AND REPRESENTATION: The assured must disclose to the

insurer every material circumstance which is known to him, and he is deemed to

know everything which he ought to know in the ordinary course of business.

WARRANTIES: A warranty, according to sec. 35 of the Act, is an undertaking

by the assured that some condition shall be fulfilled, or that a certain thing shall

be or shall not be done, or whereby he confirms or negatives the existence of a

particular state of facts. A warranty may be express or implied. An express

warranty is a condition which is set forth in the policy or attached thereto; and

an implied warranty is an essential condition implied by law, though not written

in the policy.

SEA-WORTHINESS: The ship must be sea-worthy at the commencement of

the voyage, or if the voyage is divisible into distinct stages, at the

commencement of each stage.

LEGALITY: So far as the assured can control the matter, the adventure shall be

carried out in a lawful manner.

THE VOYAGE: The subject-matter may be insured by a voyage policy "from a

port" or "at and from" a port.

Perils- Perils are the risks which the underwriter agrees to take upon himself,

and are inserted in the policy. Perils of the sea are all perils, losses, misfortunes

of a marine character or a character incident to a ship as such. The purpose of

the policy is to secure an indemnity against accidents which may happen,

not against events which must happen.

LOSSES

KINDS OF LOSSES: A loss may be either Total or Partial. Total loss may be

subdivided into two classes: (i)Actual Total Loss, and (ii) Constructive Total

Loss. The case of partial loss arises when the subject-matter of the insurance is



194
partially lost. Partial loss is also of two classes: (i)Particular Average, and (ii)

General Average.

FIRE INSURANCE

A fire insurance is a contract to indemnify the insured for destruction of or

damage to property caused by fire.

AVERAGE CLAUSE: It is becoming very common in policies of fire

insurance to insert a condition called the average clause, by which the insured is

called upon to bear a portion of the loss himself. This condition is called the pro

rata condition of average. Insurable interest, the insured must have insurable

interest in the subject-matter both at the time of effecting the policy and at

the time of the loss.

THE RISK: The risk in fire policy commences from the moment the cover

note, or the deposit receipt, or the interim protection is issued and continues for

the term covered by the contract of insurance.

WHAT IS FIRE: The word fire as used in the expression "loss by fire" is to be

construed in its popular and literal sense, and means a fire which has broken

bounds.

ASSIGNMENT: In English law policy of fire insurance can be assigned only

with the consent of the insurer.

FIRE POLICIES

VALUED POLICY: In the "valued policy" the insured can recover a fixed

amount, agreed at the issue of the policy without the necessity for any further

proof of value at the time of the fire.

RE-INSTATEMENT OR REPLACEMENT POLICY: A clause is inserted

in the policy under which the insured can recover not the value of buildings or



195

plant as depreciated, but the cost of replacement of the property destroyed by

new property of the same kind, or the insurers may themselves reinstate the

property instead of paying in cash.

CONSEQUENTIAL LOSS POLICY: The insured is indemnified for the loss

of profits which he sustains through interruption or cessation of his business as a

result of fire.

LIFE INSURANCE

Life assurance may be defined as a contract in which the insurer, in

consideration of a certain premium, either in a lump sum or by other periodical

payments, agrees to pay to the assured, or to the person for whose benefit the

policy is taken, a stated sum of money on the happening of a particular event

contingent on the duration of human life.

LIFE INSURANCE IS NOT A CONTRACT OF INDEMNITY: "The

contract commonly called life assurance when properly considered is a mere

contract to pay a certain sum of money on the death of a person, in consideration

of the due payment of a certain annuity for his life.... This species of insurance

in no way resembles a contract of indemnity."

INSURABLE INTEREST: The assured must have at the time of the contract

an insurable interest in the life upon which the insurance is effected.

PERSON IN HIS OWN LIFE: A person is presumed to have an interest in his

own life and every part of it, and can insure for any sum whatsoever, and as

often as he pleases.

RELATIVES: A wife has an insurable interest in the life of her husband, and

vice versa.



196
PERSONS NOT RELATED: A creditor has an insurable interest in the life of

his debtor to the extent of the debt.

POLICIES: Whole Life Policy: which matures only at the death whenever it

may occur. Endowment Policy: in which the sum insured is payable after the

expiration of certain term of years if the policy-holder is alive, or at his death if

he dies previously. Joint Life Policies: are issued under which the sum assured

is payable at the death of the first of the two lives. Survivorship Policy: is also

granted under which the sum assured is payable at the death of the last or

survivor of two lives.

SURRENDER VALUE: The amount which the insurers are prepared to pay in

total discharge of the contract, in case the assured wishes to surrender his policy

and extinguish his claim upon it.

LOANS ON POLICIES: Where a policy has a surrender value, it also has a

loan value, and assurance companies usually lend 95 per cent of the surrender

value.

PAID-UP POLICY VALUE: The amount to which the sum assured would be

reduced at any time if the assured requested a rearrangement of his contract so

that no further premium should be payable.

PRINCIPLE OF GOOD FAITH AND SEC.45 OF INSURANCE ACT: The

general rule is that in all kinds of insurance the assured must disclose everything

which is likely to affect the judgment of the insurer and what is stated must be

truthful.

ACCIDENT INSURANCE: An injury is accidental where it is the natural

consequence of an unexpected cause, or the unexpected consequence of a

natural cause. Accident insurance consists of three categories:- (a) Personal



197

accident insurance, of three, including insurance against sickness; (b) Property

insurance, including burglary, fidelity, insolvency, etc

(c) Liability insurance, including motor insurance, workmen's compensation

insurance, etc.



198
LESSON 8

THE NEGOTIABLE INSTRUMENTS ACT, 1881

The law relating to negotiable instruments is primarily contained in the

Negotiable Instruments Act, 1881. The word `negotiable' means transferable

from one person to another, and the term `instrument' means `any written

document by which a right is created in favor of some person.' Thus, the

negotiable instrument is a document by which rights vested in person can be

transferred to another person in accordance with the provisions of the

Negotiable Instruments Act, 1881. The Negotiable Instruments Act does not

affect the provisions of Sections 31 and 32 of the Reserve Bank of India Act,

1934. But, the following are Not Promissory Notes. Ex. "I promise to pay B Rs.

500 and all other sums which shall be due to him."

Essentials or Characteristics of a Promissory Note:

(1)

In writing.

(2)

Promise to pay.

(3)

Unconditional.

(4)

Signed by the Maker.

(5)

Certain Parties.

(6)

Certain sum of money.

(7)

Promise to pay money only.

(8)

Number, place, date etc.

(9)

It may be payable in installments

(10) It may be payable on demand or after a definite period
(11) It cannot be made payable to bearer on demand or even payable to bearer

after a certain period (Sec. 31 of RBI Act).

(12) It must be duly stamped under the Indian Stamp Act

BILL OF EXCHANGE: A `bill of exchange' is defined by Section 5 as "an

instrument' in writing, containing an unconditional order, signed by the maker,

directing a certain person to pay a certain sum of money only to or the order of,

a certain person, or to the bearer of the instrument."



199

Characteristic features of a Bill of Exchange:

1. It must be in writing.
2. It must contain an order to pay and not a promise or request. Words, like

`Please pay Rs. 10,000 to A on demand and oblige, do not constitute the
instrument a bill of exchange.

3. The order must be unconditional.
4. There must be three parties, viz., drawer, drawee and payee.
5. The parties must be certain.
6. It must be signed by the drawer.
7. The sum payable must be certain or capable of being made certain.
8. The order must be to pay money and money alone.
9. It must be duly stamped as per the Indian Stamp Act.
10. Number, date and place are not essential. Oral evidence may be obtained

as to date and place of execution.

CHEQUE: A cheque is defined as `a bill of exchange drawn on a specified

banker and not expressed to be payable otherwise than on demand' (Section 6).

Thus, a cheque is a bill of exchange with two added features, viz.: (i) it is always

drawn on a specified banker; (ii) and it is always payable on demand and not

otherwise.

DISTINCTION BETWEEN PROMISSORY NOTE AND BILL OF

EXCHANGE

Promissory note differs from a bill of exchange in the following respects:



Promissory Note



Bill of Exchange

1. There are only two parties-the 1. There are three parties-the drawer,

maker (debtor) and the payee

the drawee and the payee.

(creditor).

2. Contains an unconditional 2. Contains an unconditional order to

promise by the maker to pay

the drawee to pay according to the

the payee.

drawer's directions.

3. No prior acceptance is needed. 3. A bill payable `after sight' must be

accepted by the drawee or his agent
before it is presented for payment.



200
4. The liability of the maker or 4. The liability of the drawer is

drawer is primary and

secondary and conditional upon non-

absolute.

payment by the drawee.

5. No notice of dishonour need 5. Notice of dishonour must be given

be given.

by the holder to the drawer and the
intermediate endorsers to hold them
liable thereon.

DIFFERENCE BETWEEN BILL OF EXCHANGE AND CHEQUE:



Cheque



Bill of Exchange

1. Must be drawn only on a

1.

Can be drawn on any person

banker.

including a banker.

2. The amount is always payable 2.

The amount may be payable on

on demand.

demand or after a specified time.

3. The cheque is not entitled to

3.

A usance (time) bill is entitled to

days of grace.

three days of grace.

4.

4.

A bill payable after sight must be

Acceptance is not needed.

accepted.

5.

5.

Crossing of a bill of exchange is not

A cheque can be crossed

possible.

6.

6.

Notice of dishonour is necessary to

Notice of dishonour is not

hold the parties liable thereon. (A

necessary. (The parties thereon

party who does not receive a notice

remain liable, even if no notice

of dishonour can generally escape its

of dishonour is given.)

liability thereon.)

7.

7.

Not to be noted or protested in

Noted or protested to establish

case of dishonour.

dishonour.

8. The protection given to the

8.

paying banker in respect of

No such protection is available in the

crossed cheques is peculiar to

case of bills.

this instrument.

HOLDER AND HOLDER-IN ?DUE-COURSE: According to section 8, a

holder of a negotiable instrument is "a person entitled in his own name to the

possession thereof and to receive or recover the amount due thereon from the



201

parties thereto." Thus, a person who has obtained the possession of an

instrument by theft or under a forged endorsement is not a holder as is not

entitled to recover the amount of the instrument.

A `holder in-due-course': Is "a person who for consideration became the

possessor of a promissory note, bill of exchange or cheque, if payable to bearer,

or the payee or endorsee thereof, if payable to order, before the amount

mentioned in it becomes payable and without having sufficient cause to believe

that any defect existed in the title of the person from whom he derived his title

(Section 9).

Privileges of a Holder in Due Course

1.

A person, who signed and delivered to another a stamped but otherwise
inchoate (incomplete) instrument, is stopped form asserting, as against a
holder in due course.

2.

The maker or drawer, the acceptor, and all the intermediate endorsers
continue to remain liable to the holder in due course until the instrument
is duly satisfied.

3.

Where a bill of exchange is drawn by a fictitious person and is payable to
his order, the acceptor cannot be relieved from his liability to the holder
in due course.

4.

Where an instrument is negotiated to a holder in due course, the parties
to the instrument cannot escape liability on the ground that the delivery
of the instrument was conditional or for a special purpose only (Sections
46 & 47).

5.

Not only that the title of the holder in due course is not subject to the
defect in previous holder's title but once the instrument passes through
the hands of a holder in due course, it is purged of all defects.

6.

No maker of a promissory note and no drawer of a bill of exchange or
cheque shall in a suit thereon by a holder in due course, be permitted to
deny the validity of the instrument as originally made or drawn.

7.

No maker of a note and no acceptor of a bill payable to order is, in a suit
thereon by a holder in due course, permitted to deny the payee's capacity
at the date of the note or bill to endorse it (Section 121).



202
Ambiguous Instrument (Sec.17): An ambiguous instrument is one which may

be construed either as a promissory note or as a bill exchange. The holder may at

his option treat it as either and the instrument shall be treated accordingly.

Where Amount is stated differently in Figures and Words (Sec. 18): If the

amount undertaken or ordered to be paid is stated differently in figures and in

words, the amount stated in words shall be the amount undertaken or ordered to

be paid.

Inchoate Instruments (Sec.20): An inchoate instrument means an instrument

that is incomplete in certain respects. The person so signing shall be liable upon

the instrument, in the capacity in which he signed the same, to any holder-in-

due-course for such amount. But, a person other than a holder-in-due course

cannot recover from the person delivering the instrument anything in excess of

the amount intended by him to be paid there under.

Minor (Sec. 26): A minor may draw, indorse, deliver and negotiate negotiable

instruments so as to bind all parties except himself.

Agency (Sec. 27): Every person capable of binding himself or of being bound

may so bind himself or be bound by a duly authorized agent acting in his name.

Liability of Agent Signing (Sec. 28): An agent who signs his name to a P/N,

B/E or cheque without indicating thereon that he does not intend thereby to

incur personal responsibility, is liable personally on the instrument, except to

those who induced him to sign upon the belief that the principal only would be

held liable.

Liability of Legal Representative (Sec.29): A legal representative of a

deceased person who signs his name to a promissory note, bill of exchange or



203

cheque is liable thereon, unless he expressly limits his liability to the extent of

the assets received by him as such.

Negotiable Instruments Made, etc.: Without Consideration (Sec.43): A

negotiable instrument made, drawn, accepted, indorsed or transferred without

consideration, or for a consideration which fails, creates no obligation of

payment between the parties to the transaction.

Partial Absence or Failure of Money Consideration (Sec.44): When the

consideration for which a person signed a promissory note, bill of exchange or

cheque consisted of money, and was originally absent in part or has

subsequently failed in part, the sum which a holder standing in immediate

relation with such signer is entitled to receive from him is proportionately

reduced.

Partial Failure of Consideration not Consisting of Money (Sec. 45): When a

part of the consideration for which a person signed a promissory note, bill of

exchange or cheque, though not consisting of money, is ascertainable in money

without collateral enquiry, and there has been a failure of that part, the sum

which a holder standing in immediate relation with such signer is entitled to

receive from him is proportionally reduced.

Lost or Stolen Instruments [Sec. 58]: When a negotiable instrument has been

lost, or has been obtained from any maker, acceptor or holder thereof by means

of an offence or fraud, or for an unlawful consideration, no possessor or

indorsee who claims through the person who found or so obtained the

instrument is entitled to receive the amount due thereon from such maker,

acceptor or holder, or from any party prior to such holder. However, if such



204
possessor or indorsee is a holder in due course he shall be entitled to receive the

payment thereof.

Lost Instruments: When a bill or note is lost, the finder acquires no title to it as

against the rightful owner. He is also not entitled to sue the acceptor or maker in

order to enforce payment on it. If the finder obtains payment, the person who

pays it in due course may be able to get a valid discharge for it. But the true

owner can recover the money due on the instrument from the finder.

Stolen Instruments: (1) A person cannot enforce payment of it against any

party thereto nor can he retain it against the party from whom he had stolen it.

(2) If the thief negotiates the instrument to a purchaser for value who has notice

of the theft, the transferee cannot acquire a better title than the thief and thus

cannot enforce payment. (3) If a person who has stolen a bill or note payable to

bearer transfers it to a holder in due course, he confers a good title on him or any

person deriving title from such holder.

Instruments Obtained for Unlawful Consideration

1. The instrument is void.

2. A holder in due course, however, obtains a good title to an instrument

which was originally made or drawn or subsequently negotiated for an
unlawful consideration.

Forged Instruments: The most common species of forgery is fraudulently

writing the name of an existing person. It is also a forgery to sign the name of a

fictitious person or non-existing person. Even a man's signature of his own

name may amount to forgery, if it is put with the intention that the signature

should pass for the signature of another person of the same name.

Legal Position:

1.

A forged signature is worthless and confers no title.



205

2.

The holder of a forged instrument cannot enforce payment thereon nor
can he give a valid discharge therefore.

3.

The true owner can compel the debtor to pay it over again to him.

4.

Even a holder in due course cannot claim payment on a forged
instrument.

5.

A person whose signatures have been forged may, by his conduct, be
stopped from denying its genuineness to an innocent holder.

CHEQUE

A cheque is the usual method of withdrawing money from an account with a

banker. A cheque, in essence, is an order by the customer of the bank directing

his banker to pay on demand, the specified amount, to or to the order of the

person named therein or to the bearer. Section 6 defines a cheque as "bill of

exchange drawn on a specified banker and not expressed to be payable

otherwise than on demand.

Requisites of a Cheque:

1.

Written Instrument. A cheque must be an instrument in writing.

2.

Unconditional Order. A cheque must contain an unconditional order.

3.

On a Specified Banker Only. A cheque must be drawn on a specified
banker.

4.

A Certain Sum of Money. The order must be only for the payment of
money and that too must be specified.

5.

Payee to be certain. A cheque to be valid must be payable to a certain
person.

6.

Payable on Demand. A cheque to be valid must be payable on demand
and not otherwise.

7.

Amount of the Cheque. A mount of the cheque must be clearly
mentioned.

8.

Dating of Cheques. The drawer of a cheque is expected to date it before
it leaves his hands.



206
A cheque hearing an earlier date is ante-dated and the one bearing the later date

is called post-dated. In India, a cheque that bears a date earlier than six months

is a stale cheque and cannot be claimed for. In England, cheque can remain in

circulation for a period of twelve months.

CROSSING OF CHEQUES: Crossing of a cheque is a direction to the paying

banker by the drawer that payment should not be made across the counter. The

payment on a crossed cheque can be collected only through a banker.



Section 123, defines crossing as, "Where a cheque bears across its face

an addition of the words `and company' or any abbreviation thereof, between

two parallel transverse lines, or of two parallel transverse lines simply, either

with or without the words `not negotiable', that addition shall be deemed a

crossing and the cheque shall be deemed to be crossed generally. A cheque

having the cross mark such as `X' is not generally regarded as a crossed cheque.

A cheque that is not crossed is called an open cheque.

Significance of Crossing: Payment cannot be claimed across the counter on a

crossed cheque, crossing of cheques serves as a measure of safety against theft

or loss of cheques in transit. By crossing a cheque, a person, who is not entitled

to receive its payment, is prevented from getting the cheque encashed at the

counter of the paying banker.

TYPES OF CROSSING: Crossing may be either (1) General or (2) Special.

General Crossing: The term general crossing implies the addition of two

parallel transverse lines.

Special Crossing: `Special Crossing' implies the specification of the name of

the banker on the face of the cheque. Section 124 in this regard, reads: Where a

cheque bears across its face, an addition of the name of a bank, either with or



207

without the words `not negotiable', that addition shall be deemed a crossing, and

the cheque shall be deemed to be crossed to that banker." The object of special

crossing is to direct the drawee banker to pay the cheque only if it is presented

through the particular bank mentioned therein. Thus, it makes the cheque system

still safer.

Not Negotiable Crossing: By including the words `not negotiable', the cheque

is deprived of its special feature of negotiability. Such a cheque is like any other

goods where the title of the transferee is always subject to the title of the

transferor. A bank, therefore, should be extra careful in paying such cheques.

Account Payee Crossing (A/c Payee Crossing): An A/c payee crossing

signifies that the drawer intends the payment to be credited only to the payee's

account and in none else. The addition of `A/c payee' to a crossing has no legal

sanctity and the paying banker may ignore such a direction without being liable

for any damages.

Not Negotiable, A/c Payee Crossing: The instrument is rendered not negotiable

plus A/c payee crossing directs the collecting banker to collect it for the payee

only and warns that if the amount is collected for someone else, he may be held

liable for damages.

Who can Cross a Cheque?: 1. The drawer of a cheque. 2.The holder of a

cheque. 3.The Banker. A cheque once crossed need not remain so forever. The

drawer has the right to cancel the crossing by writing the words `pay cash' and

putting his `full signatures'.

MARKING OF CHEQUES: Marking or certification is a method adopted

when the paying banker verifies the customer's account and indicates thereon

that there are enough funds in his Account to meet that cheque.

The marking



208
of a cheque may be done at the instance of the drawer or at the instance of the

payee or at the instance of the collecting banker. The effect of marking is

different in the three cases.

Marking at the Instance of the Drawer: The banker acquires a right to retain

money to meet such a cheque. Marking only certifies the genuineness of the

drawer's signature and the sufficiency of funds and not the endorsements.

Marking at the Request of the Payee or Holder: It constitutes nothing more

than an intimation that at the time of marking, the bank has a sufficient balance

to the credit of the drawer.

Marking Between Bankers: This marking is an appropriation of funds in the

banker's hands for a specific purpose he is entitled to deduct the amount of such

marked cheque when estimating the balance available for meeting other

cheques.

Marking of Post-dated Cheques: It has been held anomalous and invalid.

Marking of such a cheque amounts to a promise, requiring consideration to

support it.

MATERIAL ALTERATIONS: A material alteration was defined as "an

alteration which alters the business effect of the instrument if used for any

business purpose. Any change made in the instrument that causes it to speak a

different language from what is originally intended, or which changes the legal

identity of the instrument in its terms or in relation or parties thereto is a

material alteration."

Examples of material alteration are:(i) date (ii) the time of payment (iii) the

place of payment (iv) the sum payable (v) the number of parties (vi) the



209

relationship between parties (vii) legal character of the cheque (viii) opening a

crossed cheque (ix) converting an order cheque into a bearer cheque.

Effect of Material Alteration (Section 87): It renders the same void as against

any one who is party thereto at the time of making such alteration and does not

consent thereto unless it was made in order to carry out the common interest of

the original parties, and any such alteration, if made by an endorsee, discharges

his endorsers from all liability to him in respect of the consideration thereof."

Examples of Alterations Which are not Material: (i)filling blanks of the

instrument (Section 20); (ii)conversion of blank endorsement into endorsement

in full (Section 49); (iii)crossing of cheques (Section 125);

FORGERY: No protection is granted to paying banker for making payment of

cheques bearing forged signature of the customer. Payment of a cheque bearing

forged signature of the customer is deemed to be a payment without the

authority of customer and hence constituted breach of the implied contract

between banker and the customer.

THE PAYING BANKER: The `paying banker' is a term used to denote the

position and duties of the dawee banks in payment the cheques of their

customers. Thus, `paying banker' is a banker upon whom a cheque is drawn.

The job of a paying banker in regard to the payment of cheques is highly risky.

However, this obligation of the paying banker to honour his customer's cheque

is subject to certain conditions:

Statutory Protection Available to a Paying-Banker: Section 31 holds the

paying banker liable for payment to a wrong person. But, the banker, despite his

efforts, may inadvertently happen to pay a cheque to a wrong person claiming

payment under a clever forgery of endorsement.



210
PAYMENT IN DUE COURSE

(Section 10) The following conditions must be satisfied before a payment of

negotiable instrument can be called as a payment in due course:-

1. Payment must be in accordance with the apparent tenor of the
instrument.
2. Payment must be made in good faith and without negligence.

3. Payment must be made to the person in possession of the instrument.

4. Payment must be made under circumstances which do not afford a

reasonable ground for believing that he is not entitled to receive

payment of the amount mentioned therein.

5. Payment must be made in money only.

WHEN BANKER MUST REFUSE PAYMENT?

1.

Where the customer countermands the payment: A banker must
refuse to honour cheque, payment for which has been stopped by the
drawer.

2.

On receipt of a notice of customer's death

3.

On customer's becoming insolvent

4.

On receipt of a notice of the customer's insanity

5.

On receipt of Garnishee order



Where Garnishee Order is absolute, i.e., attaching the whole amount,
payment on cheques received after the receipt of such an order must be
refused.

6.

On assignment of Credit balance: On receipt of a notice of assignment
signed by the customer of credit balance of his account.

7.

On suspicious misuse by trustee



If the banker feels suspicious ,that the trustee intends to use the amount
of the cheque for his personal use.

8.

On suspicious as to the title



Where the banker believes that the person presenting the cheque is not
entitled to receive the payment thereon.

9.

In case of a joint account to be operated by all jointly where the cheque
is not signed by all of the joint account holders.

10.

Where the cheque is irregular, ambiguous or otherwise materially
altered.



211

11.

Where the cheque is presented after a period of six months from the date
it bears, i.e., it has become stale.


WHEN BANKER MAY REFUSE PAYMENT?: In the following cases the

banker may dishonour a cheque without incurring any liability thereon:

1. Where the cheque is post-dated. Refusal to pay a post-dated cheque

before its due date does not make a banker liable for wrongful dishonour.

2. Where the funds of the customer are insufficient.

3. Where a cheque is not duly presented. (For instance, a cheque presented

after business hours).

NEGOTIATION: A negotiable instrument may be transferred by negotiation or

assignment. When a negotiable instrument is transferred by negotiation, its

transferee,if holder in due course, gets a better title than its transferor.

Negotiation By Mere Delivery: (Section 47) A bill or cheque payable to bearer

is negotiated by mere delivery of the instrument. Delivery may be actual or

constructive. Actual delivery means change of actual possession. It is a

constructive delivery when the possession is given to the transferee's agent,

clerk or servant on his behalf.

Payable to bearer: An instrument is payable to bearer (1) where it is made so
payable, or (2) where it is originally made payable to order but the only or the
last endorsement is in blank. A cheque which is originally drawn payable to
bearer remains bearer even though it is subsequently endorsed in full. The rule is
once a bearer cheque always a bearer cheque or (3) where the payee is a
fictitious person.
Negotiation By Endorsement and Delivery: Instruments payable to a specified

person or to the order of a specified person can be negotiated only by

endorsement and delivery.



212
ENDORSEMENT/INDORSEMENT

1. It must be written on the instrument itself and be signed by the indorser. 2.The

endorsement must be of the entire instrument. 3.Where in a negotiable

instrument payable to order, the payee or endorsee is wrongly designated or his

name is mis-spelt, he should sign the instrument in the same manner as given in

the instrument. 4.Where there are two or more endorsements on an instrument,

each endorsement is deemed to have been made in the order in which it appears

on the instrument, until contrary is proved. 5.An endorsement may be blank or

full. It may also be restrictive.

Kinds of Endorsements: According to the Negotiable Instruments Act, 1881,

endorsement may take any of the following forms:

1. Conditional Endorsement: It is one which makes the transfer of the

property in a negotiable instrument from the endorser to the endorsee

dependent upon the fulfillment of a stated condition. For example, where the

endorsement states "Pay `X' if he reaches Delhi". In such a case, `X' can

claim payment on the instrument only if he reaches Delhi.

2. Endorsement in Blank: Where the endorser just puts his signature without

specifying the endorsee, the endorsement is said to be in blank (Section 16).

For example, a cheque is payable to `X or order' and `X' merely signs on the

back of it, will constitute endorsement in blank.

3. Endorsement in Full: Where along endorser's signature, the name of the

endorsee is specified, the endorsement is called `endorsement in full'

(Section 16). "Pay Y or order" and is signed by `X', the payee, it constitute

`endorsement in full.'



213

4. Restrictive Endorsement: An endorsement is restrictive which prohibits the

further negotiation of a negotiable instrument.

5. Endorsement `Sans Recourse': An endorsement of a negotiable instrument

may be express words in the endorsement exclude his own liability thereon

(Section 52). Such endorsement is called `Endorsement Sans recourse' or

`without recourse to me'. For example, where X endorse a cheque as: `Pay

Y or order Sans Recourse' or `Pay Y or order without Recourse to me'. `X'

will not be liable on the instrument if it is dishonoured.

6. Sans Frais: Indicates that no expenses should be incurred on account of the

bill.

7. Facultative Endorsement: The endorser waives his right to receive notice

of dishonour.

8. Partial Endorsement: Where the negotiable instrument is endorsed for part

of the amount. Such an endorsement is not valid.

Effect of Endorsement: The effect of an endorsement in blank and delivery of

an instrument originally made, drawn, payable to order is to convert it into one

payable to bearer and transferable by mere delivery. The effect of restrictive

endorsement is (a) to prohibit or exclude further negotiation, or (b) to constitute

the endorsee an agent of endorser to endorse the instrument, or (c) to constitute

the endorsee as agent to receive its contents for some other specified persons.

THE COLLECTING BANKER: One of the principal functions of a banker is

to receive instruments from his customer in order to collect the proceeds and

credit them to his customer's account. When acting in this capacity he is called a

"collecting banker".







214
Statutory protection to a collecting banker

1. For Crossed Cheques only. 2.Collection for customers. 3. Acted in

Good Faith and Without Negligence.

BILL OF EXCHANGE AND PROMISSORY NOTE KINDS OF BILLS

1.

Inland Bill: "a promissory note, bill of exchange or cheque drawn or

made in India and payable in or drawn upon any person resident in

India". (Section 11).

2.

Foreign Bills: According to Section 12, a foreign bill is negotiable

instrument which is note an inland instrument.

3.

Trade and Accommodation Bills: A trade bill is a bill of exchange

issued in respect of a genuine trade transaction Such bills are drawn by

the seller on the buyer in respect of payment of the price of the goods

sold and purchased.

4.

Time Bills (Usance Bills): Time bills, also called as usance bills, are

bills payable at a fixed period after date or sight of the bills.

5.

Demands Bills:A bill of exchange or a promissory note is payable on

demand when ?



(1) It is made payable `on demand'or `at sight'or`on presentation'

(Section 21)


(2) No time for payment is mentioned therein (Section 19)

6.

Clean and Documentary Bill: Where the banker is instructed to deliver

to the drawee of the bill the documents of title against acceptance of the

bill, the bill is called as Documents against Acceptance of Bill (D/A Bill)

and where the documents are to be released only against payment, it is

called as Documents against Payment of Bill (D/P Bill).



215

PARTIES TO A BILL OF EXCHANGE

1. The Drawer

2. The Drawee

3. The Payee

4. The Holder

5. The Indorser

6. The Indorsee

7.

Drawee in Case of Need: Such a person whose name is mentioned as an

alternative drawee is called a drawee in case of need'.

8.

Acceptor for Honour: An acceptor for honour is a person who, on the

refuse by the original drawee to accept the bill or to furnish better

security when demanded by the notary, accepts the bill in order to

safeguard the honour of the drawer or any indorser.

PARTIES TO A PROMISSORY NOTE

1. The Maker

2. The Payee

3. The Holder

4. The Indorser

5. The Indorsee

9.

CAPACITY OF PARTIES: The capacity of a party to draw, accept,

make or endorse a bill or note is co-extensive with his capacity to enter

into contract.





216
ACCEPTANCE: The acceptance of a bill is the indication by the drawee of his

assent to the order of the drawer. An acceptance of a bill may be general or

qualified.

PRESENTMENT: Presentment of a negotiable instrument is made for two

purposes.

(1)

for acceptance, and (2) for payment.

DISHONOUR: A bill of exchange may be dishonoured either by non-

acceptance or by non-pay-ment.

Dishonour by Non-Acceptance: Section 91 enumerates the circumstances

when a bill will be considered as dishonoured by non-acceptance.

Dishonour by Non-Payment: A negotiable instrument is said to be dishonoured

by non-payment when the maker, acceptor or drawee, as the case may default in

payment upon being duly required to pay the same (Section 92).

COMPENSATION: Section 117 lays down rules for determining the amount

of compensation to the holder or an endorser in the event of dishonour of a

negotiable instrument, which includes: Compensation to holder.

Compensation to Endorses. Compensation against banker. Discharge of

One or More Parties



One or more parties to a negotiable instrument is/are discharged from

liability in the following ways:

1.

By cancellation [Sec. 82 (a)].

2.

By release [Sec. 82 (b)].

3.

By payment [Sec. 82 (c) and 8]

4.

By allowing drawee more than 48 hours to accept (Sec.83)

5.

By taking qualified acceptance (Sec. 86).



217

6.

By not giving notice of dishonour.

7.

By non-presentment for acceptance of a bill (Sec.61)

8.

By delay in presenting cheque (Sec.84).

9.

By material alteration.

10.

By negotiation back.



218


IMPORTANT QUESTIONS:

1.

"Every contract is an agreement but every agreement is not a contract".

Do you agree with this statement?

2.

"Performance of the conditions of a proposal is an acceptance of the

proposal"- Comment.

3.

"A Promise against a promise is a good consideration" - Comment.

4.

What is the nature and extent of partner's authority to bind the firm by

his acts? Are third parties affected by restrictions placed on the implied

authority?

5.

What are the legal consequences if the goods are not delivered in time

and the payment is not made in time?

6.

What are the fundamental principles of Insurance? Explain the losses in

life Insurance.

7.

What do you mean by crossing a cheque? What are the circumstances in

which a banker is entitled to dishonour a cheque?

8.

What is Agency by `Ratification'? What are the essential conditions to

make a valid ratification?

9.

Enumerate the rights and obligations of finder of lost goods.

10.

Explain and illustrate the circumstances under which contracts need not

be performed.

***





219



UNIT IV

LESSON 1

NATURE OF COMPANY AND FORMATION



The Companies Act, 1956 defines the word `company' as a company formed

and registered under the Act or an existing company formed and registered

under any of the previous company laws (Section 3). Section 12 permits the

formation of different types of companies. These may be (i) companies limited

by shares, (ii) companies limited by guarantee, and (iii) unlimited companies.

The vast majority of companies in India are with limited liability by shares.

The common stock so contributed is denoted in money and is "the

capital" of the company. The persons who contribute it, or to whom it belongs,

are members. The proportion of capital to which each member is entitled is his

"share". Shares in a company are transferable.

Features of the Company: The following are the characteristic features of

company:

1. Incorporated Association: A company must be incorporated or registered

under the Companies Act. Minimum number required for the purpose is 7 in
case of a public company, and 2, in case of a private company (Sec. 12). As
per Section 11, an association of more than 10 persons, in case of banking
business, and 20 in case of any other business, if not registered as a company
under the Companies Act, or under any other law for the time being in force,
becomes an illegal association.

2. Artificial Person: A company is created with the sanction of law and is not

itself a human being, it is, therefore, called artificial; and since it is clothed
with certain rights and obligations, it is called a person. A company is
accordingly an artificial person.



220


3. Separate Legal Entity: Unlike partnership, company is distinct from the

persons who constitute it. Section 34(2) says that on registration, the
association of persons becomes a body corporate by the name contained in
the memorandum. [Saloman v. Saloman & Co.Ltd. (1877)]

4. Limited Liability: The company being a separate person, its members are

not as such liable for its debts. Hence, in the case of a company limited by
shares, the liability of members is limited to the nominal value of shares held
by them. Thus, if the shares are fully paid up, their liability will be nil.
However, companies may be formed with unlimited liability of members or
members may guarantee a particular amount. In such cases, liability of the
members shall not be limited to the nominal or face value of the shares held
by them. In case of unlimited liability companies, members shall continue to
be liable till each paise has been paid off. In case of companies limited by
guarantee, the liability of each member shall be determined by the guarantee
amount, i.e., he shall be liable to contribute upto the amount guaranteed by
him.

5. Separate Property: Shareholders are not, in the eyes of the law, part owners

of the undertaking. In India, this principle of separate property was best laid
down by the Supreme Court in Bacha F.Guzdar V. the Commissioner of
Income Tax, Bombay (Supara). The Supreme Court held that a shareholder
is not the part owner of the company or its property, he is only given certain
rights by law, e.g., to vote or attend meetings, to receive dividends.

6. Transferability of Shares: Since business is separate from its members in a

company form of organization, it facilitates the transfer of members'
interests. The shares of a company are transferable in the manner provided in
the Articles of the company (Sec. 82). However, in a private company,
certain restrictions are placed on such transfer of shares but the right to
transfer is not taken away absolutely.

7. Perpetual Existence: A company being an artificial person cannot be

incapacitated by illness and it does not have an allotted span of life. The
death, insolvency or retirement of its members leaves the company
unaffected. Members may come and go but the company can go for ever.

8. Common Seal: A company being an artificial person is not bestowed with a

body of natural being. Therefore, it has to work through its directors, officers
and other employees. But, it can be held bound by only those documents
which bear its signatures. Common seal is the official signature of a
company.



221



9. Company may sue and be sued in its own name: Another fall-out of

separate legal entity is that the company, if aggrieved by some wrong done
to it may sue or be sued in its own name.


LIFTING OF THE CORPORATE VEIL: In case of a dishonest and

fraudulent use of the facility of incorporation, the law lifts the corporate veil and

identifies the persons (members) who are behind the scene and are responsible

for the perpetration of fraud. The concept of lifting the corporate veil is a

changing concept. The veil of corporate personality, even though not lifted

sometimes, is becoming more and more transparent in modern jurisprudence.

The following are some such cases: (i) For the protection of revenue.

(ii)Where the company is acting as agent of the shareholders, (iii)Where a

company has been formed by certain persons to avoid their own valid

contractual obligation, (iv)Where a company has been formed for some

fraudulent purpose or is a "sham", (v)Where a company formed is against

public interest or public policy, (vi)Where the holding company holds 100

per cent shares in a subsidiary company and the latter is created only for

purposes of holding company (vii)Where the number of members falls below

statutory minimum (Section 45) (viii)Where prospectus includes a

fraudulent misrepresentation. (ix)Where a negotiable instrument is signed

by an officer of a company [Section 147 (4)(c)]. (x)Holding and Subsidiary

Companies (Secs. 212-213). (xi)Investigation into related companies. Section

239 (xii)For investigation of ownership of a company. Sec 247 (xiii)Where in

the course of winding of a company. Section 542 (xiv)Where breach of

economic offence is involved. (xv)Where company is used as medium to

avoid welfare legislation. (xvi)Where device of incorporation is used for

some illegal or improper purpose.(xvii)To Punish for contempt of Court



222


(xiii)For determination of technical competence of company. (xix)Where

company is a mere sham or cloak.

ILLEGAL ASSOCIATION: (Section 11) No company, association or

partnership consisting of more than 10 persons for the purpose of carrying on

the business of banking and more than 20 persons for the purpose of carrying on

any other business can be formed unless it is registered under the Companies

Act or is formed in pursuance of some other Indian Law. Thus, if such an

association is formed and not registered under the Companies Act, it will be

regarded as an `Illegal association' although none of the objects for which it

may have been formed is illegal. However, Section 11 does not apply in the

following cases: Stock Exchange, Association `Not for Profit-making', Joint

Hindu Family.

Effects of an Illegal Association: Following are the effects of an illegal
association:

1. Every member is personally liable for all liabilities incurred in the

business.

2. Members are punishable with fine which may extend up to Rs.10,000.
3. Such an association cannot enter into any contract.
4. Such an association cannot sue any of its members or any outsider, not

even if the association is subsequently registered as a company.

5. It cannot be sued by a member or an outsider for any debts due to it

because it cannot contract any debt.

6. It cannot be wound up even under the provisions relating to winding up

of un-registered companies.

7. While an unregistered firm can be dissolved, an illegal association

cannot be dissolved because law does not recognize its very existence.

8. The illegality of an illegal association cannot be cured by subsequent

reduction in the number of its members.



223



9. The profits made by an illegal association are, however, liable to

assessment to income-tax.

CLASSIFICATION OF COMPANIES: Companies can be classified into

three categories according to the mode of incorporation. If a company is

incorporated by a charter granted by the monarch, it is called as Chartered

Company and is regulated by that charter. For example, the East India

Company came into being by the grant of a Royal Charter. Such type of

companies do not exist in India. A company which is created by a Special Act of

the Legislature is called a Statutory Company and is governed by the

provisions of that Act. (E.g. The State Bank of India). A company brought into

existence by registration of certain documents under the Companies Act, 1956 is

called Registered Company. The liability of members of a registered company

may be limited or unlimited (Section 12). It may be limited by shares, or by

guarantee or by both (i.e., shares and guarantee).

A company limited by shares is a registered company having the liability of its

member limited by its memorandum of association to the amount, if any, unpaid

on the shares respectively held by them. A shareholder cannot be called upon to

pay more than the amount remaining unpaid on his shares. His personal assets

cannot be called upon for the payment of the liabilities of the company, if

nothing remains to be paid on the shares purchased by him. Such a company is

also known as a "Share Company."

A company limited by guarantee is one having the liability of its members

limited by the memorandum to such amount as the members may respectively

undertake by the memorandum to contribute to the assets of the company in the

event of its being wound up. Such a company is also known as a "Guarantee

Company". A pure "guarantee company" does not have a share capital.



224


A company limited by shares as well as by guarantee is a hybrid form of

company which combines elements of the guarantee and the share company.

Such a company raises its initial capital from its shareholders.

Private and Public Companies: Either of the above kinds of companies (i.e., a

limited liability company and an unlimited liability company) may be private or

public (Section 12).

Private Company: A private company can be formed by merely two persons by

subscribing their names to the Memorandum of Association. Such a company

must have a minimum paid-up capital of Rs. 1 lakh, and by its articles must:

(i) Prohibit an invitation to the public to subscribe to its shares and debentures;

(ii) Restrict the rights of its members to transfer shares; and

(iii) limit the number of its members to fifty, excluding its employee-members
or past employee-members; provided that where two or more persons hold one
or more shares in a company jointly, they shall, for the purpose of this
definition, be treated as a single member.

(iv) Prohibits any invitation or acceptance of deposits from persons other than its
member, directors or their relatives.

Public Company: [Section 3(1) (iv)] Companies (Amendment) Act, 2000

defines a public company to mean a company which ?

(a) Is not a private company.
(b) Has a minimum paid-up capital of five lakh rupees or such higher paid-

up capital, as may be prescribed;

(c) Is a private company, which is a subsidiary of a company, which is not a

private company. Minimum number of members required to form a
public company is 7. however there is no limit to the maximum number
of members. (Sec. 12).



225



Private Company which is a subsidiary of public company: A private

company which is a subsidiary of a public company will be treated as a public

company from the date of commencement of the Companies (Amendment) Act,

2000.

Deemed Public Company: The Companies (Amendment) Act. 2000 has, by

introducing sub-section (11) to Section 43A, made a private company will not

automatically become a public company on account of shareholding or turnover.

Conversion of Private Company into a Public Company: Section 44 provides

for conversion of a private company into a public company. The procedure is:

1) Special Resolution:
2) Increase in Members/Directors
3) The Word "Private" is to be deleted before the word limited in the name.
4) Within thirty days of the passing of the special resolution altering the

articles, the company shall file with the Registrar (i) a printed or type-
written copy of the special resolution, and (ii) a prospectus or a
statement in lieu of prospectus [Sec.44(a)]

Conversion of Public Company into a Private Company: A public company

having a share capital, and membership within the limits imposed upon private

companies by section 3(1) (iii), may become a private company by following the

procedure as given below:

1. Pass special resolution for altering the articles so as to include there in

the necessary restrictions, limitation and prohibitions and to delete any
provision inconsistent with the restrictions.

2. The word Private should be added before Limited.
3. The approval of the Central Government to the alternation in the articles

for converting a public company into a private company should be
obtained.

4. Within one month of the date of the receipt of the order of approval, a

printed copy of the altered articles must be filled with the Registrar.



226


5. Within thirty days of the passing of the special resolution, a printed or

type-written copy there of should be filed with the Registrar.

Holding and Subsidiary Companies: Where a company has control over

another company, it is known as the Holding Company and the company over

which control is exercised is called the Subsidiary Company. A Company is

deemed to be under the control of another if;

1. That other controls the composition of its Board of Directors; or
2. The other company holds more than half in nominal value of its equity

share capital

3. It is subsidiary of a third company which itself is a subsidiary of the

controlling company. For example, where company `B' is a subsidiary of
company `A' and company `C' is a subsidiary of company `B' then
company `C' shall be a subsidiary of company `A'. If Company `D' is a
subsidiary of company `C', then company `D' shall also be a subsidiary
of company `B' and consequently also of company `A'.

One Man Company: A member may hold virtually the entire share capital of a

company. Such a company is known as a "one-man company". This can happen

both in a private company and a public company. The other member/members

of the company may be holding just one share each. Such other members may

be just dummies for the purpose of fulfilling the requirements of law as regards

minimum membership [Salomon v. Salomon & Co.Ltd.].

Non ?Trading Company/Non ? Profit Association: Such a company must

have the objects of promoting of commerce, arts, science, religion, charity or

any other useful object and must apply its profit, if any, or other income in

promoting its object and must prohibit payment of any dividend to its members.

As soon as it obtains a license and is registered accordingly, it will have the

same privileges and obligations that a limited company has under the

Companies Act, 1956.



227



Govt. Companies: Section 617 defines a Government company as any

company in which not less than fifty-one per cent of the paid-up share capital is

held by the Central Government, or by any State Government or Governments

or partly by the Central Government and partly by one or more State

Governments. A subsidiary of a Government company is also treated as a

Government company.

Foreign Companies (591 to 602): A foreign company is a company which is

incorporated in a country outside India under the law of that other country and

has a place of business in India. There are of two types: (1) Companies

incorporated outside India, establish a place of business in India after April 1,

1956; and (2) Companies incorporated outside India, which established a place

of business in India before that date and continue to have an established place of

business in India.

Investment Companies: An investment company is a company the principal

business of which consists in acquiring, holding and dealing in shares and

securities. It involves only the acquisition and holding of shares and securities

and thereby earning income by way of interest, dividend, etc.

FERA Companies: The FERA companies are those companies which are

incorporated in India in which the non-resident interest (viz., foreign equity

share capital) was more than 40%. After the Amendment of FERA 1973 in the

year 1993, the erstwhile FERA companies would not in future be subjected to

obtain the prior approval of the RBI in respect of certain matters.

Finance Companies: A finance company means a non-banking company which

is a financial institution within the meaning of clause (c) of sec.45 of the RBI

Act, 1934.



228


Public Financial Institutions (Sec. 4-A): The following financial institutions

shall be regarded, for the purposes of the Companies Act, as public financial

institutions, namely:-

1. The Industrial Credit and Investment Corporation of India Limited

(ICICI)

2. The Industrial Finance Corporation of India (IFCI)
3. The Industrial Development Bank of India (IDBI)
4. The Life Insurance Corporation of India (LIC)
5. The Unit Trust of India (UTI)
6. The Infrastructure Development Finance Company Ltd."



Sub-section (2) of Sec. 4-A empowers the Central Government to

specify any other institution, as it may think fit, to be a public financial

institution by issuing a notification in the Official Gazette.

FORMATION OF A COMPANY

We shall discuss the formation in three heads: (i) Promotion (ii)Registration

(iii)Floatation

Promotion: Promotion is a term of wide import denoting the preliminary steps

taken for the purpose of registration and floatation of the company.

Duties and Liabilities of Promoters: Duties: The promoters to make a full

disclosure of all material facts relating to the formation of the company. He

should not make any secret profit at the expense of the company he promotes,

without the knowledge and consent of the company and if he does so, the

company can compel him to account for it.

Liabilities: For Non-disclosure: In case a promoter fails to make full disclosure

at the time the contract was made, the company may either:



229



(1)

rescind the contract and recover the purchase price where he sold his
own property to the company, or

(2)

recover the profit made, even though rescission is not claimed or is
impossible, or

(3)

claim damages for breach of his fiduciary duty. The measure of damages
will be the difference between the market value of the property and the
contract price.

Registration (Sec 12, 33): Availability of Name: Section 20 states that a

company cannot be registered by a name, which in the opinion of the Central

Government is undesirable. Therefore, it is advisable that promoters find out the

availability of the proposed name of the company from the Registrar of

companies.

Procedure: The promoters will have to get together at least seven person in the

case of public company, or two persons in the case of a private company to

subscribe to the memorandum of association.

Documents to be Delivered: Section 33 states that the following three

documents are required to be presented for the purpose of registration of a

company:

(i)

The memorandum of the company;

(ii)

The articles, if any;

(iii)

The agreement, if any, which the company proposes to enter into

with any individual for appointment as its managing or whole time

director or manager.

Statutory Declaration of Compliance: Section 33 also requires a declaration to

be filed with the Registrar of Companies along with the Memorandum and the

Articles. This is known as "Statutory Declaration of Compliance."



230


Consent of Directors: In case of a public company, if the first directors are

appointed by the articles then the following must be complied with before the

registration of articles with the Registrar of Companies:

(i)

Written consent of those directors to act, signed by themselves, or by an

agent duly authorized in writing, and

(ii)

An undertaking in writing signed by each such director to take from the

company and pay for his qualification shares (if any).

Other Documents are usually delivered along with the aforesaid documents:

(i)

The address of the registered office of the company (Sec. 146).

(ii)

Particulars regarding directors, manager and secretary, if any (Sec 303).

These two documents are required to be submitted within 30 days of

registration of the company:

Certificate of Incorporation/Consequences of Incorporation: This certificate

serves the same purpose in the case of a company which a birth certificate does

in the case of a natural person.

Effect of Certificate of Incorporation: The certificate of incorporation is

conclusive evidence that all the requirements of the Companies Act in respect of

registration and of matters precedent and incidental thereto have been complied

with.

Floatation/Capital Subscription: When a company has been registered and has

received its certificate of incorporation, it is ready for "floatation", i.e., it can go

ahead with raising capital sufficient to commence business and to carry it on

satisfactorily.



231





Section 70 makes it obligatory for every public company to take either of

the following two steps:

(i) Issue a prospectus in case public is to be invited to subscribe to its

capital, or


(ii) File a `statement in lieu of prospectus' with the Registrar, in case capital

has been arranged privately. It must be done at least 3 days before
allotment.

Certificate to Commence Business: Where the company has issued a

prospectus ? Section 149(1) it shall not commence business or exercise any

borrowing powers unless:

(a) Minimum subscription
(b) Every director of the company has paid to the company.
(c) No money is, or may become, liable to be repaid to the applicants.
(d) Filed with the Registrar a duly verified declaration by one of the

directors or the secretary.



Where the company has not issued a prospectus Section 149(2) requires

that it shall not commence business or exercise its borrowing powers unless:-

(a) it has filed with the Registrar a statement in lieu of prospectus;
(b) every director of the company has paid to the company on each of the

shares taken or contracted to be taken by him.

(c) Filed with the Registrar duly verified declaration by one of the directors

or the secretary.

Penalty: every person at fault is liable to a fine upto Rs.5,000 for every day of

default.



232


LESSON 2

MEMORANDUM AND ARTICLES OF ASSOCIATION

The Memorandum of Association of a company is its charter which contains the

fundamental conditions upon which alone the company can be incorporated. It

tells us the objects of the company's formation and the utmost possible scope of

its operations beyond which its actions cannot go. If anything is done beyond the

powers, that will be ultra vires (beyond powers of) of the company and so void.

It enables shareholders, creditors and all those who deal with the company to

know what its powers are and what is the range of its activities.

Form and Contents: Shall be in such one of the Forms in Tables B,C,D and E

in Schedule I to the Companies Act, 1956 as may be applicable in the case of the

company, or in Forms as near thereto as circumstances admit. Section 13

requires the memorandum of a limited company to contain: (i) the name of the

company, with "limited" and "private limited" the name of the State, the objects

of the company, the declaration that the liability of the members is limited; and

the amount of the authorized share capital, divided into shares of fixed amounts.

The Name Clause (Sec. 13(1(a)]: The last word in the name of the company, if

limited by shares or guarantee is `limited' unless the company is registered

under Sec.25 as an `association not for profit' (Sec. 13(1)(a) and 25)].

The Registered Office Clause (Sec. 13(1)(b)]:This clause states the name of the

State in which the registered office of the company will be situated. Every

company must have registered office which establishes its domicile, and it is

also the address at which company's statutory books must normally be kept and

to which notices, and all other communication can be sent.



233



The Objects Clause (Sec. 13(1)(d)]: The objects clause defines the objects of

the company and indicates the sphere of its activities. A company cannot do

anything beyond or outside its objects and any act done beyond them will be

ultra vires and void, and cannot be ratified even by the assent of the whole body

of shareholders.



Section 13, read along with Tables "B', `C', `D' and E', requires the

company to divide its objects clause into two parts:

(a) Main objects of the company to be pursued by the company on its

incorporation and object incidental or ancillary to the attainment of the
main objects; and


(b) Other objects of the company not included in (a) above.

Liability

Clause

[Sec. 13(2)]: This clause states the nature of liability of

the members. In case of a company with limited liability, it must state that

liability of members is limited, whether it be by shares or by guarantee. In case

of companies limited by guarantee, this clause will state the amount which every

member undertakes to contribute to the assets of the company in the event of its

winding-up. In fact, the absence of this clause in the memorandum means that

the liability of its members is unlimited.

The Capital Clause [Sec. 13(4)(c)]: This clause states the amount of share

capital with which the company is registered and the mode of its division into

shares of fixed value, i.e., the number of shares into which the capital is divided

and the amount of each share.

The Association Clause [Sec. 13(4)(c)]: The names, addresses, descriptions,

occupations of the subscribers, and the number of shares each subscriber has

taken and his signature attested by a witness.





234


DOCTRINE OF ULTRA VIRES (Beyond Powers)

The company's activities are confined strictly to the objects mentioned in its

Memorandum, and if they go beyond these objects, then such acts will be ultra

vires. The object of declaring such acts as ultra vires is to protect the interests of

shareholders and all others who deal with the company.

1.

Ultra vires the directors (Not Void)

2.

Ultra vires the Articles of Association (Not Void)

3.

Ultra vires the Memorandum of Association/Company (Void)

Effects of Ultra Vires : (1) Injunction against the company: (2) Personal

liability of directors to the company (3) Personal liability of directors to third

party (4) Ultra vires contracts are void.

Exceptions to Doctrine of Ultra Vires: (1) Acquires some property (2)

Property can be recovered, exists and is traceable (3) Ultra vires loan to pay its

own debts ? can recover the money from the company (4) Any person borrows

money from the company ? the company has right to sue and recover the money

from him (5) The company may compel the director to refund the money(6) The

company is held liable for the ultra vires torts (civil wrongs) of its employees

when it is proved.

(i)

A company exists only for the objects which are expressly stated in its
objects clause

(ii)

Any act done outside the express or implied objects is ultra vires.

(iii)

The ultra vires acts are null and void ab initio.

(iv)

The members of a company (even a single member) can get an order of
injunction from the Court restraining the company from going ahead
with the ultra vires act.

(v)

If the directors have exceeded their authority such matter can be ratified
by the general body of the shareholders, provided the company has the
capacity to do by its memorandum of association.

(vi)

Any property acquired by a company under an ultra vires transaction
may be protected by the company against damage by third persons.



235



(vii) Directors and other officers can be held liable to compensate the

company for any loss occasioned to it by an ultra vires act.

(viii) Directors and other officers shall be personally accountable to the third

parties.

(ix)

Money or property gained through an ultra-vires transaction available in
specie or capable of being identified shall be restituted (restored) to the
other party.

(x)

In case, an ultra-vires loan, taken by a company is used for payment of
its intra-vires debts, the lender of the ultra loan is substituted in place of
the creditor who has been paid off and as such can recover the money.

ALTERATION OF MEMORANDUM

Section 16 provides that the company con not alter the conditions contained in

memorandum except in the cases and in the mode and to the extent express

provision has been made in the Act.

Change of Name: The name of a company may be changed at any time by

passing a special resolution at a general meeting of the company and with the

written approval of the Central Government.

Change of Registered Office: (a)Change of registered office from one premises

to another premises in the same city, town or village. A resolution passed by the

Board of directors shall be sufficient. (b)Change of registered office from one

town or city or village to another town or city or village in the same State

Procedure.

(i)

Special Resolution

(ii)

Confirmation of Regional Director

(iii)

Copy of Special Resolution and Confirmation by Regional Directors to
be filed with RoC.

(iv)

Notice of new Location. Within 30 days the notice of the new location
has to be given to the Registrar who shall record the same. (c)Change of
Registered Office from one State to another State.



Can be done by a special resolution which is required to be confirmed by

the Company Law Board (CLB).



236


Alteration of Objects Clause (Section 17): Empowers a company to change the

place of its Registered Office from one State to another or to alter its objects by

passing a special resolution, if alteration is sought on any of the following

grounds:

1. To carry on its business more economically and more efficiently
2. To attain its main purpose by new or improved means
3. To enlarge or change the local area of its operation
4. To carry on some business which under existing circumstances may be

conveniently or advantageously combined with the business of the
company

5. To restrict or abandon any of the objects specified in the memorandum.
6. To sell or dispose of the whole or any part of the undertaking.
7. To amalgamate with any other company or body of persons.

Alteration of Liability Clause (Sec. 38): The liability of a member of a

company cannot be increased unless the member agrees in writing. Increase in

liability may be by way of subscribing for more shares than the number held by

him at the date on which the alteration is made or in any other manner.

Alteration of Capital Clause (Section 94): provides that, if the articles

authorize, a company limited by share capital may, by an ordinary resolution

passed in general meeting, alter the conditions of its memorandum in regard to

capital so as-

1. to increase its authorized share capital ; 2. to consolidate and divide all or any

of its share capital into shares of larger amount than its existing shares. 3. to

convert all or any of its fully paid-up shares into stock, and reconvert the stock

into fully paid-up shares of any denomination; 4. to sub-divide its shares, or any

of them, into shares of smaller amount. 5. to cancel shares which have not been

taken or agreed to be taken by any person.





237



ARTICLES OF ASSOCIATION

The articles of association of a company and its bye laws are regulations which

govern the management of its internal affairs and the conduct of its business.

They define the duties, rights, powers and authority of the shareholders and the

directors in their respective capacities and of the company, and the mode and

form in which the business of the company is to be carried out.

Registration of Articles: Section 26 states that a public company limited by
shares may register articles of association signed by the subscribers to the
memorandum. There are actually three possible alternatives in which such
company may adopt articles: (i) it may adopt Table A in full or, (ii) it may
wholly exclude Table A and set out its own regulations in full, or (iii) it may set
out its own articles and adopt part of Table A.

No Article Company (Sec. 28) : A company limited by shares may either frame
its own set of articles or may adopt all or any of the regulations contained in
Table `A' [Section 28(1)]. But if it does not register any Articles, Table `A'
applies.

Subject matter of Articles/Contents

The articles of a company usually deal with the following matters:

(1)

the business of the company;

(2)

the amount of capital issued and the classes of shares the increase and
reduction of share capital;

(3)

the rights of each class of shareholders and the procedure for variation of
their rights;

(4)

the execution or adoption of a preliminary agreement, if any; the
allotment of shares; calls and forfeiture of shares for non-payment of
calls;

(5)

the allotment of shares; calls and forfeiture of shares for non-payment of
calls:

(6)

transfer and transmission of shares;

(7)

company's lien on shares;



238


(8)

exercise of borrowing powers including issue of debentures;

(9)

general meetings, notices, quorum, proxy, poll, voting resolution,
minutes;

(10) number, appointment and powers of directors;
(11) dividends ? interim and final ? and general reserves;
(12) accounts and audit;
(13) keeping of books-both statutory and others.

Form and Signature of Articles [Sections 29 & 30]: The articles of association

of any company not being a company limited by shares, shall be in one such

form in Tables `C', `D', and `E' in Schedule I as may be applicable. Section 30

requires that articles shall:-

1. be printed; 2. be divided into paragraphs numbered consecutively; 3. be

signed by each subscriber of the memorandum of association.

Inspection and Copies of the Articles: A company shall, on being so required

by a member, send to him within seven days of the requirement, on payment of

one rupee, a copy of the articles.

ALTERATION OF ARTICLES

A company may, by special resolution alter or add to its articles. A printed or

type written copy of every special resolution altering the articles must be filed

with the Registrar within 30 days of the passing of the special resolution.

EFFECT OF MEMORANDUM AND ARTICLES/BINDING FORCE OF

MEMORANDUM AND ARTICLES

Members bound to company: Each member must observe the provisions of the

articles and memorandum.

Company bound to members: A company is bound to members by whatever is

contained in its memorandum and articles of association.



239



Member bound to member: The articles bind the member inter se, i.e., one to

another so far as rights and duties arising from the articles are concerned.

Whether company or members bound to outsiders?: No, the memorandum

or articles do not confer any contractual rights to outsiders against the company

or its members, even though the name of the outsiders is mentioned in the

articles.

Whether directors are bound by whatever is contained in the Articles? Yes,

the directors of the company derive their powers from the articles and are

subjected to limitations, if any, placed on their powers by the articles.

CONSTRUCTIVE NOTICE OF ARTICLES AND MEMORANDUM: The

memorandum and articles when registered become public documents and then

they can be inspected by anyone on payment of a nominal fee. Every person

dealing with the company is presumed to have read these documents and

understood them in their true perspective. This is known as `Doctrine of

Constructive Notice'.

DOCTRINE OF INDOOR MANAGEMENT: The doctrine of indoor

management allows all those who deal with the company to assume that the

provisions of the articles have been observed by the officers of the company. In

other words, they are not bound to enquire into the regularity of internal

proceedings. An outsider is not expected to see that the company carries out its

internal regulations.

Exceptions : The doctrine of indoor management is subject to the following

exceptions:

1. Knowledge of Irregularity.



240


2. No knowledge of Articles: The rule cannot be invoked in favour of a person

who did not consult the memorandum and articles and, thus did not rely on
them.

3. Void or Illegal Transaction. The rule does not apply to transactions which

are void or illegal ab initio, eg., forgery.

4. Negligence: If an officer of a company does something which would not

ordinarily be within his powers, the person dealing with him must make
proper enquiries and satisfy himself as to the officer's authority. If he fails to
make inquiry he cannot rely on the rule.

5. Doctrine does not apply where question is in regard to very existence of

agency.

Doctrine is not applicable where a precondition is to be fulfilled before company

itself can exercise a particular power



241



LESSON 3

PROSPECTUS AND STATEMENT IN LIEU OF PROSPECTUS

A prospectus, means any document described or issued as prospectus and

includes any notice, circular, advertisement or other document inviting deposits

from the public or inviting offers from the public for the subscription or

purchase of any shares in or debentures of a body corporate. Thus, a prospectus

is not merely an advertisement; it may be a circular or even a notice. A

document shall be called a prospectus it satisfies two things:

1. It invites subscriptions to shares or debentures or invites deposits.

2. The aforesaid invitation is made to the public.

The Board attends to the following matters:

1. Appointment of various expert agencies such as bankers, auditors,

secretary, etc.

2. Entering into underwriting contract, brokerage contracts.

3. Making arrangements for the listing of shares on stock exchanges.

4. Drafting a prospectus for the purpose of issue to the public.

UNDERWRITING

Underwriting, in its simplest form, consists of an undertaking by some person or

persons that if the public fails to take up the issue, he or they will do so. In

return for this undertaking, the company agrees to pay the underwriter a

commission on all shares or debentures, whether taken up by the public or by he

underwriters.







242


SUB-UNDERWRITING

The underwriters usually choose to spread their risk by using sub-underwriters

who agree to take a certain number of shares for which they accept

responsibility and for which they receive a commission out of the commission

received by the underwriters. The difference between the commission paid by

the company to the principal underwriters and the commission paid by them to

the sub-underwriters is known as overriding commission.

BROKERAGE CONTRACTS

There must be authority in the articles to pay brokerage, and the brokerage must

be disclosed in the prospectus, or statement in lieu of prospectus, as the case

may be, and it should pay a reasonable brokerage. (Sec. 76)

LISTING OF SHARES ON A STOCK EXCHANGE

he eligibility criteria for listing of securities of a company are:

(i)

Minimum issued equity capital of a company should be Rs. 5 crores [Rs.

3 crores where trading is screen-based], and

(ii)

The minimum public offer of equity capital shall be not less than 25 per

cent.

Time of Floatation: The Board of Directors will decide about the time of issue

of prospectus. It is advisable to consider the condition of the capital market, the

investors' mood, fiscal and monetary policies of the Government and the state of

business conditions before issuing a prospectus.

Dating of Prospectus: Sec. 55 states that every prospectus must be dated and

the date is deemed to be the date of publication of the prospectus. Section 56 of

the Companies Act lays down that the matters and reports stated in Schedule II

to the Companies Act must be included in a prospectus.



243



Abridged Form of Prospectus: In stead of appending full prospectus, now

`abridged prospectus' need only be appended to the application form. Form 2-A

has been prescribed as a format of abridged prospectus.

When `Abridged Prospectus' Not Necessary?: In the following

circumstances, an `abridged prospectus' need not accompany the application

forms:

(i)

A bonafide invitation to a person [Sec. 56(3)(a)]

(ii)

When shares or debentures are not offered to the public
[Sec.56(3)(b)].

(iii)

Where offer is made only to existing members/debenture holders of
the company by way of rights, whether with or without the right of
renunciation [Sec.56(5) (a)].

(iv)

In the case of issue of shares or debentures which are in all respects
similar to those previously issued and dealt in and quoted on a
recognized stock exchange [Sec.56(5) (b)].

Registration of the Prospectus (Section 60): A copy of the prospectus duly

signed by every director or proposed directors must be delivered to the Registrar

before its publication.

Is the issue of prospectus compulsory?: when prospectus is not required to
be issued?

The following are the circumstances:



244
(i)

A private company

(ii)

If the promoters or directors feel that they can mobilize resources
through personal relationship and contacts.

(iii)

A memorandum containing the prescribed salient features of a
prospectus.

(iv)

A bonafide invitation to a person to enter into an underwriting agreement
Sec.56(3)

(v)

Application form is issued in relation to shares or debentures not offered
to the public [Sec. 56(3)]

(vi)

Offered to existing holders of shares or debentures[Sec. 56(5)]

(vii) The issue relates to shares or debentures previously issued [Sec. 56(5)]
(viii) Where invitation is made in the form of an advertisement, ordinarily

called as "prospectus announcement' [Sec. 66].

Shelf Prospectus and Information Memorandum [Section 60A and 60 b]:

The Companies (Amendment) Act, 2000 has introduced two new sections, viz.,

Sections 60A and 60B relating to `Shelf Prospectus' and `Information

Memorandum' respectively. `Shelf prospectus' means a prospectus issued by

any financial institution or bank for one or more issues of the securities or class

of securities specified in that prospectus.

Information Memorandum (Section 60B): `Information memorandum' means

a process undertaken prior to the filing of a prospectus by which a demand for

the securities proposed to be issued by a company is elicited, and the price and

the terms of issue for such securities is assessed, by means of a notice, circular,

advertisement or document [Section 2(19B)].

STATEMENT IN LIEU OF PROSPECTUS (Section 70): If a public

company makes a private arrangement for raising its capital then it must file a

statement in lieu of prospectus with the Registrar at least three days before any

allotment of shares or debentures can be made.



If allotment of shares or debentures is made without filing the Statement

in lieu of prospectus, the allottee may avoid it within two months after the



statutory meeting, or where no such meeting is to be held, within two months of

the allotment. Contravention also renders the company and every director liable

to a fine up to Rs. 10,000.

LIABILITY FOR UNTRUE STATEMENTS IN THE PROSPECTUS

(Sections 62-63): The prospective shareholders are entitled to all true disclosures

in the prospectus. The persons issuing the prospectus are bound to state

everything accurately and not to omit material facts.

What is an untrue statement?: According to Section 65(1) if the statement is

misleading in the form and context in which it is included; and where the

omission form a prospectus of any matter is calculated to mislead, to be a

prospectus in which an untrue statement is included.

Civil Liability (Section 62): The following persons shall be liable to pay

compensation to every subscriber for loss or damage (1) director of the company

at the time of the issue of the prospectus; (2) person who has authorized himself

to be named and is named in the prospectus as a director, (3) every promoter of

the company; and (4) who has authorized the issue of the prospectus.

Remedies against the Company: Any person who, takes shares from the

company may

1. rescind the contract to take the shares (2)claim damages. He must,

however, take action to rescind the contract: (a) within a reasonable time,

(b) before proceedings to wind up the company have commenced, and

(c) before he does anything. which is inconsistent with the right to

repudiate, e.g., to accept dividends.

Remedies against Directors or Promoters: A shareholder who had been

induced to take shares may claim : (i) damages for fraudulent



246


misrepresentation' (ii) compensation under Section 62; (iii) damages for non-

compliance with the requirements of Section 56 regarding contents of the

prospectus.

Damages for Fraudulent Misrepresentation: An allottee of shares may bring

an action for deceit, i.e., fraudulent misrepresentation.

Compensation for untrue Statement [Sec. 62]: File a suit for compensation

under Section 62. A claim can be made, whether the statements are fraudulent or

innocent.

Remedies against Experts : The allottee of the shares is entitled to claim from

the expert: (i) damages, (ii) compensation under Section 62.

Liability under Section 56: An omission from a prospectus of a matter required

to be stated under Section 56(i.e., as per Sch.II) may give rise to an action for

damages at the instance of a subscriber for shares, who has suffered loss.

Criminal Liability for Misstatement in Prospectus (Section 63): Every person

authorizing its issue is punishable: (i) with imprisonment for a term up to two

years, or (ii) with fine up to Rs. 50.000, or (iii) With both imprisonment and

fine.

Liability under Section 68: Every person authorizing its issue. shall be

punishable with imprisonment for a term which may extend to 5 years or with

fine which may extend to Rs. 1,00,000 or with both.

Golden Rule for framing of Prospectus : The `Golden Rule' for framing of a

prospectus was laid down by Justice Kindersely in New Brunswick & Canada

Rly. & Land Co. V. Muggeridge (1860). Briefly, the rule is: Those who issue a

prospectus hold out to the public great advantages which will accrue to the

persons who will take shares in the proposed undertaking. Thus, the persons



247



issuing the prospectus must not include in the prospectus all the relevant

particulars specified in Parts I & II of Schedule II of the Act, which are required

to be stated compulsorily but should also voluntarily disclose any other

information within their knowledge which might in any way affect the decision

of the prospective investor to invest in the company



248


LESSON 4

SHARE & SHARE CAPITAL

Meaning of a Share. Section 2(46) defines a share "as a share in the share

capital of a company and includes stock except where a distinction between

stock and share is expressed or implied. A share signifies the following:

(i)

The interest of a shareholder in the company; the right to receive
dividend, attend meetings, vote at the meeting and share in the surplus
assets of the company, if any, in the event of the company, being wound
up ;

(ii)

The liability of the shareholder in the company to pay calls on shares
until fully paid up;

(iii)

The right of the shareholder to transfer the shares subject to the articles
of association.

(iv)

Binding covenants on the part of the company as well as the shareholder,
as given in the Articles of the company.



Thus, a share of a company in the hands of a shareholder signifies a

bundle of rights and obligations. A share is not a negotiable instrument.

Share Vs. Share Certificate : Sec. 82 of the Companies Act. 1956, describes a

share as a moveable property transferable in the manner provided by the articles

of the company and Sec. 84, on the other hand, describes a `share certificate' to

mean a certificate, under the common seal of the company, specifying any

shares held by any member.

Share Vs. Stock

Share: The share capital of a company is divided into a number of indivisible

units of specified amount. Each of such unit is called a `share'. Stock The term

`stock' may be defined as the aggregate of fully paid-up shares of a member

merged into one fund of equal value. It is a set of shares put together in a

bundle. The `stock' is expressed in terms of money and not as so many shares.



249



Stock can be divided into fractions of any amount and such fractions may be

transferred like shares.

Distinction: Following are the main points of difference:

Share

Stock

1.

A share has a nominal value. 1.

A stock has no nominal value.

2. A share has a distinctive 2.

A stock bears no such number.

number which distinguishes
it from other shares.

3. Share can be issued

3. A company cannot make an original

originally to the public

issue of stock. Stock can be issued by
existing company by converting its
fully paid-up shares.

4. A share may either be fully 4.

A stock can never be partly paid-up, it

paid-up or partly paid-up.

is always fully paid-up.

5. A share cannot be

5. A stock may be transferred in any

transferred in fractions. It is

fractions.

transferred as a whole.

6. All the shares are of equal

6. Stock may be of different

denomination.

denominations.

Classes of Shares: The most common classes of shares are: (1) Preference, (2)

Equity or Ordinary, and (3) Deferred or Founders'.



A public company and a private company which is a subsidiary of

public company may not issue shares other than equity, preference and

cumulative convertible preference shares (CCPS).

Preference Share: A preference share is one which carries the following two

rights over holders of equity shares: (i) a preferential right in respect of

dividends at a fixed amount or at a fixed rate, and (ii) a preferential right in

regard to repayment of capital on winding up.



The preference or priority of the preference shareholders is in relation to

the rights of equity shareholders [Section 85].



250




Participating and Non-participating : If a preference share carries either

one or both of the following rights then it is known as participating share:

(i)

To participate further in the profits either along with or after
payment of a certain rate of dividend on equity shares,

(ii)

To participate in the surplus assets at the time of winding up
[Section 85].



Thus, if a preference share does not carry either of these rights, then it

will be known as non-participating share .If a preference share carries the right

for payment of arrears in dividend from future profits, then such a share is

known as cumulative preference share. If a preference share does not carry the

right to dividend in arrears, then such a preference share is known as non-

cumulative or simple. The preference shares are always presumed to be

cumulative unless expressly described as non-cumulative.

Redeemable and Irredeemable : Redeemable preference shares are those

shares which are to be redeemed by the company either at a fixed date, or after a

certain period of time or at the option of the company as per Section 80.

Conditions:



Shares issued earlier cannot be converted into redeemable preference

shares:

There must be authority in the articles. The shares can be redeemed only when

they are fully paid up; it will only be redeemed: (a) out of profits of the company

which would otherwise be available for dividend, or (b) out of the proceeds of a

new issue of shares.



If there is a premium payable on redemption, it must have been provided

out of profits or out of the securities premium account before the shares are



251



redeemed. Where the shares are redeemed out of profits, a sum equal to the

nominal amount of the shares redeemed is to be transferred out of profits to the

"Capital Redemption Reserve Account."

Voting rights of preference shareholders: The preference shareholders will

vote only on matters directly relating to preference shares. (i) any resolution for

winding up of the company, (ii) any resolution for the reduction or repayment of

share capital, (iii) any resolution at any meeting, if dividend on cumulative

preference shares remains unpaid for at least two years

Equity Share: `Equity share' means a share which is not preference share

[Section 85]. The rate of dividend is not fixed. The Board of Directors

recommend the rate of dividend which is then declared by the members at the

Annual General Meeting. New issues of share capital of a company limited by

shares shall be of two kinds only, namely:- (a) equity share capital: (i) with

voting rights; or (ii) With differential rights as to dividend, voting or otherwise

in accordance with such rules and subject to such conditions as may be

prescribed; (b) Preference share capital.



Prior to the Amendment to the companies Act in 2000, public companies

were not allowed to issue equity shares with differential rights. Thus, companies

are now allowed to issue non-voting equity shares. The holders of equity shares

carrying voting rights shall have voting rights in proportion to the paid-up equity

capital of the company [Section 87(1)].

Cumulative Convertible Preference Shares (CCPs) : Such shares are issued

as preference shares but are convertible into equity shares within a period of 3

years to 5 years, as may be decided by the company.



252


Deferred or Founders' Shares: A pure private company can issue shares of a

type other than those discussed above [Section 90]. Thus, it may issue what are

known as deferred shares. As deferred shares are normally held by promoters

and directors of the company, they are usually called founders' shares. They are

usually of a smaller denomination, say one rupee each.

ISSUE OF SHARES AT PAR, AT PREMIUM, AND AT DISCOUNT

A company may issue shares at par, or at a premium, or at a discount.

ISSUE AT PAR: Shares are deemed to have been issued at par when

subscribers are required to pay only the amount equivalent to the nominal or

face value of the shares issued.

PAR VALUE OF SHARES: `Par value' is the notional face value of the shares

which a company issues to its investors.

ISSUE AT A PREMIUM: If the buyer is required to pay more than the face

value of the share, then the share is said to be issued or sold at a premium. The

premium cannot be treated as profit and, therefore, cannot be distributed as

dividend. The amount of premium received in cash and the equivalent of it

received in kind must be kept in a separate bank account known as the

`Securities Premium Account'. As per SEBI guidelines, 2000 every company

entitled to make a public issue can offer its shares at par or premium.

ISSUE AT A DISCOUNT: If the buyer of shares is required to pay less than

the face value of the share, then the share is said to be issued or sold at a

discount. Certain conditions subject to which shares can be issued at a discount:

Is authorized by a resolution

1.

The issue must be of a class of shares already issued

2.

The maximum rate of discount must not exceed 10 per cent



253



3.

Not less than one year has, at the date of issue, elapsed since the date on
which the company was entitled to commence business.

4.

Issued within two months of the sanction by the Company Law Board.

5.

Every prospectus must mention particulars of the discount allowed on
the issue of shares.

Issue of Sweat Equity Shares [Sec. 79A]: `Sweat-equity shares' means equity

shares issued by the company to employees or directors at a discount or for

consideration other than each. `Sweat equity shares' may be issued for providing

know-how or making available intellectual property rights (say, patents) or

value additions, by whatever name called. Conditions: (a) Must be of a class of

shares already issued. (b)Authorised by a special resolution (c) The resolution

specifies the number of shares, current market price, consideration, if any, and

the class or classes of directors or employees to whom such equity shares are to

be issued. (d) Not less than one year has, at the date of the issue, elapsed since

the date on which the company was entitled to commence business; (e) Are

issued in accordance with the regulations made by the Securities and Exchange

Board of India.

BONUS SHARES: A company may, if the articles so provide, capitalize profits

by issuing fully paid-up shares to the members thereby transferring the sums

capitalized from the profit and loss account or Reserve Account to the Share

Capital [Section 205(3)]. Such shares are known as bonus shares and are issued

to the existing members of the company free of charge. The issue of bonus

shares is regulated not only by the Companies Act, 1956 but also by the

guidelines issued by SEBI in this regard.

RIGHT SHARES: The existing members of the company have a right to be

offered shares, when the company wants to increase its subscribed capital. Such

shares are known as "right shares" but they are not issued free of charge.



254


SHARE CAPTIAL

Meaning of share capital: It means the capital of a company, or the figure in

terms of so many rupees divided into shares of a fixed amount, or the money

raised by the issue of shares by a company.

Nominal, Authorised or Registered capital: This is the sum stated in the

memorandum as the share capital of a company with which it is proposed to be

registered. This is the maximum amount of capital which it is authorised to raise

by issuing shares, and upon which it pays stamp duty.

Issued capital: It is the part of the authorized capital which the company has

issued for subscription. The amount of issued capital is either equal to or less

than the authorized capital.

Subscribed capital: It is that portion of the issued capital which has been

subscribed for the purchasers of the company's shares. The amount of

subscribed capital is either equal to or less than the issued capital.

Called-up capital: The company may not call up full amount of the face value

of the shares. Thus the called-up capital represents the total amount called-up on

the shares subscribed. The total amount of called-up capital can be either equal

to or less than the subscribed capital.

Uncalled capital: represents the total amount not called up on shares

subscribed, and the shareholders continue to be liable to pay the amounts as and

when called. The company may reserve all or part of the uncalled capital, which

can then be called in the event of the company being wound up. It is known as

Reserve Capital or Reserve Liability [ Section 99].

Paid-up capital: Paid ?up capital is the amount of money paid-up on the shares

subscribed.



255



Alteration of share capital: Section 94 provides that, if the articles authorise, a

company limited by share capital may, by an ordinary resolution passed in

general meeting, alter the conditions of its memorandum in regard to capital to

1.

Increase of authorised share capital : A company limited by shares if

the articles authorise, can increase its authroised share capital by passing

an ordinary resolution.

2.

Consolidate and sub-divide shares : Consolidation is the process of

combining shares of smaller denomination, Sub-division of shares is just

the opposite of consolidation.

3.

Convert shares into stock and vice versa : Stock cannot be issued in

the first instance. It is necessary to first issue shares and have then fully

paid-up and them convert them into stock. Also stock can be reconverted

into fully paid-up shares by passing a resolution in general meeting.

4.

Diminish share capital : Section 94 provides that a company may

cancel shares and diminish the amount of the share capital by the amount

of the shares so cancelled. This constitutes diminution of capital and

should be distinguished from reduction of capital.

5.

Reduce capital : (i) by reducing or extinguishing the liability of

members for uncalled capital. (ii) By paying off returning capital which

is in excess of the wants of the company, (iii) Pay off paid-up capital on

the understanding that it may be called up again. (iv) A Combination of

the preceding methods. (v) Write off or cancel capital which has been

lost or is not represented by available assets.



256


Reduction of share capital without the sanction of the court: There are some

cases in which there is reduction of share capital and no confirmation by the

court is necessary. These are:

(i)

Forfeiture of shares.

(ii)

Surrender of shares

(iii)

Diminution of capital

(iv)

Redemption of redeemable preference shares.

(v)

Purchase of shares of a member by the company under section 402.

(vi)

Purchase of its own shares as per section 77A

RAISING OF CAPITAL/ISSUE OF SHARES

Issue of shares may be made in 3 ways:

(1)

By private placement of shares;

(2)

By allotting entire shares to an issue-house, which in turn, offers the

shares for sale to the public; and

(3)

By inviting the public to subscribe for shares in the company through a

prospectus.

Private Placement of Shares: Shares are issued privately to a small number of

persons known to the promoters or related to them by family connections.

By an Offer for sale: The Issue-house publishes a document called an offer for

sale, with an application form attached, offering to the public shares or

debentures for sale at a price higher than what is paid by it or at par. This

document is deemed to be a prospectus [Section 64(1)].

By inviting public through prospectus: The company invites offers from

members of the public to subscribe fro the shares or debentures through

prospectus.



257



Issue of shares to existing shareholders: The capital is also raised by issue of

rights shares' to the existing shareholders (Sec.81). In the case, the shares are

allotted to the existing equity shareholders in proportion to their original

shareholding.

PUBLIC ISSUE OF SHARES: Public issue of shares means the selling or

marketing of shares for subscription by the public by issue of prospectus.

ALLOTMENT OF SHARES: It means and implies a division of the share

capital into defined shares of a particular value or of different classes and

assignment of such shares to different persons.

SHARE CERTIFICATE (Section 113): The share certificate states the name,

address, occupation of the holder together with the number of shares and their

distinctive number and amount paid-up. It must bear the common seal of the

company, must be stamped and bear the signature of one or more directors.

SHARE WARRANTS (Section 114): A share warrant is a negotiable

instrument. It entitles the bearer to the shares specified in it and he can transfer

the ownership of shares by merely delivering the share warrant to the transferee.

MEMBERSHIP: Membership can be in the following ways:

1. The subscribers of the Memorandum
2. Every other person who agrees in writing to become a member
3. Every person holding equity share capital of a company

Member and Shareholder: In the case of an unlimited company or a company

limited by guarantee, a member may not be a shareholder.

Modes of Acquiring Membership: By subscribing to the memorandum of

association..

1. By agreement and registration.
2. By agreeing to purchase qualification shares.



258


CALLS ON SHARES: The company may ask for some payment at the time of

application for shares (but money not less than 5 per cent of the nominal value)

and another sum at allotment. The balance may be payable as and when called

for.

FORFEITURE OF SHARES: Forfeiture of shares means taking theme away

from the member. This is absolutely a serious step for not only does it deprive

the shareholder of his property but also, unless the shares are re-issued, it

involves a reduction of capital.



259



LESSON 5

DEBENTURES

According to Sec. 2(12), `debenture' includes debenture stock, bonds and any

other securities of a company, whether constituting a charge on the assets of the

company or not.

Characteristic features of a debenture: (1)Debentures is issued by a company

and is usually in the form of a certificate which is an acknowledgement of

indebtedness. (2)It is issued under the company's seal. (3)It is one of a series

issued to a number of lenders. (4)

It usually specifies a particular period or

date as the date of repayment. (5) It generally creates a charge on the

undertaking of the company or some parts of its property.(6)

Adebenture-

holder does not have any right to vote in the company meetings.

CLASSES OF DEBENTURES

Debentures may be classified according to the following characteristics, viz.,

1. negotiability,
2. security,
3. permanence,
4. convertibility, and
5. priority.


1. Classification according to negotiability:
(1) Bearer debentures. (2) Registered debentures.
2. Classification according to security:
(1) Secured debentures. (2) Unsecured or naked debentures.
3. Classification according to permanence:
(1) Redeemable debentures.(2) Irredeemable or perpetual debentures.
4. Classification according to convertibility:
(1) Convertible debentures. (2) Non-convertible debentures.
5. Classification according to priority:
(1) First debentures. (2) Second debentures.



260


Debentures with voting rights not to be issued (Sec. 117): A company cannot

issue any debentures carrying voting rights

Issue of debentures at a discount: Debentures can be issued at a discount,

unless the Articles provide otherwise.

Debentures and debenture stock: The difference between debentures and

debenture stock is the same as the difference between shares and stock.

Debenture trust deed: [New Sec. 117-A as inserted by the Companies

(Amendment) Act, 2000]. A trust deed for securing any issue of debentures shall

be in specified form and shall be executed within the prescribed period.

Appointment of debenture trustees and duties of debenture trustees
[Sec. 117-B]: A person shall not be appointed as a debenture trustee, if he ?
(a) beneficially holds shares in the company (b) is beneficially entitled to

moneys which are to be paid by the company to the debenture trustee (c) has
entered into any guarantee in respect of principal debts secured by the
debentures or interest thereon.

Liability of company to create security and debenture redemption reserve
[New Sec. 117-C as inserted by the Companies (Amendment) Act, 2000]:
Creation of debenture redemption reserve: Where a company issues debentures
after the commencement of this Act, it shall create a debenture redemption
reserve for the redemption of such debentures, to which adequate amounts shall
be credited, from out of its profits every year until such debentures are
redeemed.

Liability of trustees for debenture-holders (Sec.119): A trustee is liable for
any breach of trust where he fails to show the degree of care and diligence
required of him as trustee, having regard to the provisions of the trust deed
conferring on him any powers, authorities or discretions.





261



REMEDIES OF DEBENTURE HOLDERS

1. He may sue for his principal and interest.
2. He may, petition under Sec. 439 for the winding up of the company by

the Court. But in addition he has also the following courses open to him:
1. Debenture-holders' action.
2. Appointment of receiver.
3. Foreclosure.
4. Sale.
5. Proof for the balance

CREATION OF CHARGES: A company like any other person can, when it

borrows money, give its-creditors security. Often it mortgages or charges its

property to its debenture-holders.

FIXED AND FLOATING CHARGES:

Fixed charge: A fixed or specific charge is one which is created on some
specific and definite assets of the company, e.g., a charge on land and building.

Floating charge: A floating charge is an equitable charge which is created on

some class of property which is constantly changing, e.g., a charge on stock-in-

trade, trade debtors, etc.

New financial instruments: Issuer of capital shall make instruments such as

Deep Discount Bonds, Debentures wit Warrants, Secured Premium Notes etc.,

so that an investor can make reasonable determination of the risks, returns,

safety and liquidity of the instruments.



262


LESSON 6

COMPANY MANAGEMENT & REMUNERATION

DIRECTORS: A company in the eyes of the law is an artificial person. The

persons who are in charge of the management of the affairs of a company are

termed as directors. They are collectively known as Board of directors or the

Board.

Only individuals can be directors (Sec. 253): No body corporate, association

or firm can be appointed as director of a company.

Number of directors: Minimum number (Sec.252): Every public company

(other than a deemed public company) shall have at least 3 directors and every

other company (e.g., a private company, a deemed public company) at least 2

directors.

APPOINTMENT OF DIRECTORS

1. First Directors (Sec. 254 and Clause 64 of Table A)

(a) The Articles of a company usually name the first directors by their

respective names or prescribe the method of appointing them.

(b) If the first directors are not named in the Articles, the number of

directors and the name of the directors shall be determined in writing by
the subscribers of the Memorandum or a majority of them (Clause 64 of
Table A).

(c) If the first directors are not appointed in the above manner, the

subscribers of the Memorandum who are individuals become directors of
the company.

2. Appointment of directors by the company (Secs. 255 to 257, 263 and 264)

Directors must be appointed by shareholders in general meeting. At least 2/3rds

of the total number of directors shall be liable to retire by rotation. Such

directors are called rotation directors.



263



Appointment of a new director (Sec. 257): (1) Fourteen days' notice and

deposit of Rs.500. (2) Consent in writing to act as director (Sec. 264). (3)

Separate ordinary resolution for each appointment (Sec. 263).

Retirement of directors where annual general meeting is not held: A director

who is to retire by rotation at the annual general meeting shall not continue in

office after the last day on which the annual general meeting in each year should

have been held.

2. Appointment of director by directors (Secs. 260, 262 and 313)

The directors of a company may appoint directors: (1) As additional directors

(Sec. 260). (2) In a casual vacancy (Sec. 262). (3) As alternate director (Sec.

313).

3. Appointment of directors by third parties: The number of directors so

appointed shall not exceed 1/3rd of the total number of directors, and they are not

liable to retire by rotation.

4. Appointment by proportional representation (Sec. 265): The system

of proportional representation ensures representation of the minority

shareholders on the Board of directors.

5. Appointment of directors by the Central Government (Sec. 408):

Any director appointed by the Central Government shall not be required to hold

any qualification shares.

Directors as agents: A company, as an artificial person, acts through directors

who are elected representatives of the shareholders.

Directors as employees: Although the directors of a company are its agents,

they are not employees or servants of the company for being entitled to



264


privileges and benefits which are granted under the Companies Act to the

employees.

Directors as officers: For certain matters under the Companies Act, the

directors are treated as officers of the company [sec.2 (30)].

Directors as trustees: Directors are treated as trustees ?

(1) of the Company's money and property; and
(2) of the powers entrusted to them.

QUALIFICATIONS AND DISQUALIFICATIONS OF DIRECTORS

A director must ?

(a) be an individual,
(b) be competent to contract, and
(c) hold a share qualification, if so required by the Articles.
Disqualification of directors (Sec. 274)

The following persons are disqualified for appointment as directors of a

company:

(a) A person of unsound mind.
(b) An undischarged insolvent.
(c) A person who has applied to be adjudicated as an insolvent and his

application is pending.

(d) A person who has been convicted by a Court of any offence involving

moral turpitude and a period of 5 years has not elapsed from the date of
expiry of the sentence.

(e) A person whose calls in respect of shares of the company held for more

than 6 months have been in arrear.

(f) A person who is disqualified for appointment as director by an order of

the Court under Sec. 203.

(g) Such person is already a director of a public company which
(a) Has not filed the annual accounts and annual returns for any continuous

three financial years commencing on and after the first day of April,
1999; or



265



(b) Has filed to repay its deposit or interest thereon on due or redeem its

debentures on due date or pay dividend and such failure continues for
one year or more.

VACATION OF OFFICE, REMOVAL AND RESIGNATION OF

DIRECTORS

Vacation of office by directors (Sec. 283): (1) Statutory Vacation. 2)Additional

grounds in case of private companies. (3) Acceptance of officer of profit.

Removal of directors

Directors may be removed by:

(1) the shareholders, (2)the Central Government, (3)the Company Law Board.

(1)

Removal by Share holders: In certain circumstances, the shareholders
may remove the directors.

(2)

Removal by Central Government: (Secs. 388-B to 388-E): The Central
Government may, in certain circumstances, remove managerial
personnel from office on the recommendation of the Company Law
Board.

(3)

Removal by Company Law Board (Sec. 402): Where, on an
application to the Company Law Board for prevention of oppression
(under Sec. 397) or mismanagement (under Sec. 398).

Resignation of directors: There is no provision in the Companies Act, 1956

relating to the resignation of office of a director.

MANAGERIAL REMUNERATION

Managerial personnel: The expression `managerial personnel' refers to the (a)

managing director. (b) Whole-time/part-time directors, or (c) Manager.

Overall maximum managerial remuneration (Sec. 198): Remuneration not to

exceed 11 per cent: The total managerial remuneration of the directors and the

manager in respect of any financial year shall not exceed 11 per cent of the net



266


profit of the company for that financial year computed in the manner laid down

in Sec. 349 and 350.

MEETINGS OF DIRECTORS (Sec. 285 to 288)

1. Number of meetings ? once in every 3 months (Sec. 285).
2. Notice of meetings (Sec. 286): Every officer of the company whose duty

is to give notice and who fails to do so shall be punishable with fine
which may extend to Rs.1,000.

3. Quorum for meetings (Sec.287): The quorum shall be 1/3rd of its strength

or 2 directors, whichever is higher.

POWERS OF DIRECTORS

General powers of the Board (Sec. 291): The Board of directors of company is

entitled to exercise all such powers and to do all such acts and things as the

company is authorized to exercise and do.

Powers to be exercised at Board meetings (Sec. 292): The following powers,

on behalf of the company,

(a) make calls on shareholders in respect of money unpaid on their shares;

(a) the Power to authorise the buy-back of shares

(b)issue debentures;

(c) borrow moneys otherwise than on debentures

(d)invest the funds of the company; and make loans.

Other powers: These powers are:

(a) to fill vacancies in the Board (Sec. 262);
(b) to sanction or give consent for certain contracts in which particular

directors, their relatives and firms are interested (Sec. 297);

(c) to receive notice of disclosure of directors' interest in any contract or

arrangement with the company (Sec. 299);

(d) to receive notice of disclosure of shareholdings of directors (Sec. 308);
(e) to appoint as managing director or manager a person who is already

managing director or manager of another company (Secs. 316 and 386) ;

(f) to make investments in companies in the same group (Sec. 372).



267



Exceptions:

1. Directors acting mala fide.
2. Directors themselves wrong-doers.
3. Incompetency of Board.
4. Deadlock in management.
5. Residuary powers. i.e., powers not expressly conferred on the directors

or shareholders, in a general meeting.

Powers to be exercised with the approval of company in general meeting

(Sec. 293):

(a) To sell, lease or otherwise dispose of.
(b) To remit or give time for repayment of any debt.
(c) To invest (excluding trust securities) the amount of compensation

received.

(d) To borrow moneys where the moneys to be borrowed (together with the

moneys already borrowed by the company) are more than the paid-up
capital.

(e) To contribute to charitable and other funds not directly relating to the

business.

Audit Committee [Sec. 292-A as introduced by the Companies (Amendment)

Act, 2000]: The Audit Committee shall act in accordance with terms of

reference to be specified in writing by the Board.

DUTIES OF DIRECTORS

1. Fiduciary duties and 2. Duties of care, skill and diligence.

1.

Fiduciary Duties: As fiduciaries, the directors must

(a) Exercise their powers honestly and bona fide for the benefit of the

company as a whole ; and

(b) Not place themselves in a position in which there is a conflict between

their duties to the company and their personal interests.

2.

Duties of care, skill and diligence: Directors should carry out their

duties with reasonable care and exercise such degree of skill and



268


diligence as is reasonably expected of persons of their knowledge and

status.

Other duties of directors: The other duties of a director are ?

(1) to attend Board meetings,
(2) not to delegate his functions except to the extent authorized by the Act or

the constitution of the company, and

(3) to disclose his interest.


LIABILITIES OF DIRECTORS

1. Liability to third parties: (1) Material misrepresentations. (2)

Independently of the Act: Directors, as agents of a company, are not

personally liable on contracts entered into a agents on behalf of the

company. (3)Liability for acts ultra vires the company: Where a director

enters into a contract, which is ultra vires the company, the director is

personally liable for breach of implied warranty of authority. (4)Liability for

frauds and torts.

2. Liability to the company

The liability of directors towards the company may arise from-

(1) ultra vires acts,
(2) negligence,
(3) breach of trust, and
(4) misfeasance.

OTHER MANAGERIAL PERSONNEL

MANAGING DIRECTOR: The term `managing director' includes a director

occupying the position of a managing director, by whatever name called.



269



MANAGER: `Manager', according to Sec. 2 (24), means an individual who

has the management of the whole or substantially the whole of the affairs of a

company.

Managing director and manager compared

Managing director

Manager

1. A managing director is entrusted 1. A manager has the management of
with the substantial powers of the the whole, or substantially the whole
management.

of the affairs of a company.

2. A company may have two managing 2. A company can have only one
directors.

manager as he is vested with the
management of the whole or
substantially of the whole or
substantially the whole of the affairs of
the company.

3. A managing director must be a 3. A manager may or may not be a
director.

director.

4. A managing director is appointed by 4. A manager is usually appointed by
the directors from among themselves the Board of directors.
and appointed either resolution of the
Board or general meeting.

SOLE SELLING AGENTS: The term `sole selling agent' is not defined in the

Act, it means an individual, firm or company who or which is given exclusive

rights to sell in a particular area the goods of the company concerned.

SECRETARY: A company secretary means "a person who is a member of the

Institute of Company Secretaries of India". According to Sec. 2 (45) of the

Companies Act as amended in 1988 `secretary' means a company secretary

within the meaning of Sec. 2 (1) (c) of the Company secretaries Act, 1980, and

includes any individual possessing the prescribed qualifications appointed to

perform the duties which may be performed by a secretary under this Act and

any other ministerial or administrative duties.



270


LESSON 7

MEETINGS AND RESOLUTIONS

GENERAL MEETINGS OF SHAREHOLDERS:

1. STATUTORY MEETING (Sec. 165): Every company limited by shares and

every company limited by guarantee and having a share capital shall, within a

period of not less than one month and not more than six months from the date at

which the company is entitled to commence business, hold a general meeting of

the members of the company. This meeting is called the `statutory meeting'.

This is the first meeting of the shareholders of a public company and is held

only once in the lifetime of a company.

Statutory report: The Board of directors shall, at least 21 days before the day

on which the meeting is to be held, forward a report, called the `statutory

report', to every member of the company.

Procedure at the meeting: (a) List of members. (b) Discussion of matters
relating to formational aspect. (c) Adjournment.
Objects of the meeting and report

1. To put the members of the company in possession of all the important

facts relating to the company.

2. To provide the members an opportunity of meeting and discussing the

management, methods and prospects of the company.

3. To approve the modification of the terms of any contract named in the

prospectus.







271



2. ANNUAL GENERAL MEETING (Secs. 166 and 167):

Company to hold annual general meeting every year (Sec. 166)

Every company shall in each year hold, in addition to any other meetings, a

general meeting as its annual general meeting and shall specify the meeting as

such in the notice calling it. There shall not be an interval of more than 15

months between one annual general meeting and the another. But the first

annual general meeting should be held within a period of 18 months from the

date of its incorporation.

The Registrar may, for any special reason, extend the time for holding

any annual general meeting by a period not exceeding 3 months. But no

extension of time is granted for holding the first annual general meeting. Every

annual general meeting shall be called during business hours on a day that is not

a public holiday. It shall be held either at the registered office of the company or

at some other place within the city, town or village in which the registered office

of the company is situated. As regards holding of the annual general meeting, no

distinction is made between a public company and a private company.

21 days' notice (Sec.171): A general meeting of a company may be

called by giving not less than 21 days' notice in writing.

Annual general meeting a statutory requirement: The annual general

meeting of a company is a statutory requirement. It has to be called even where

the company did not function during the year. Canceling or postponing of

convened meeting: Where an annual general meeting is convened for a

particular date and notice is issued to the members, the Board of directors can

cancel or postpone the holding of the meeting on that date provided power is

exercised for bona fide and proper reasons.



272


Canceling of failure to hold annual general meeting: If a company fails to hold

an annual general meeting:

(1) any member can apply, under Sec. 167, to the Company Law Board for

calling the meeting.

(2) the company and every officer who is in default shall be punishable with

fine.

Powers of Company Law Board to call annual general meeting (Sec. 167): If

default is made by a company in holding an annual general meeting in

accordance with Sec. 166, any member of the company may apply to the

Company Law Board for calling such a meeting.

Penalty for default (Sec. 168): If default is made by a company in holding a

meeting in accordance with Sec. 166 or in complying with any direction of the

Company Law Board in calling a meeting under Sec. 167, the company, and

every officer of the company who is in default, shall be punishable with fine

which may extend to Rs. 2,500 for every day after the first during which such

default continues.

3. EXTRAORDINARY GENERAL MEETING (Sec. 169): A statutory

meeting and an annual general meeting of a company are called ordinary

meetings. Any meeting other than these meetings is called an extraordinary

general meeting. It is called for transacting some urgent or special business

which cannot be postponed till the next annual general meeting. It may be

convened. (1) by the Board of directors on its own or on the requisition of the

members; or (2) by the requisitionists themselves on the failure of the Board of

directors to call the meeting.

(1) Extraordinary meting convened by the Board of directors.

The Board of directors may call an extraordinary general meeting:

(a) On its own.



273



(b )On requisition of the members.

(2) Extraordinary meeting convened by the requisitionists

Power of Company Law Board to order meeting (Sec. 186): If for any reason

it is impracticable for a company to call, hold or conduct an extraordinary

general meeting, the Company Law Board may call an extraordinary meeting.

II. CLASS MEETINGS: Under the Companies Act, class meetings of various

kinds of shareholders and creditors are required to be held under different

circumstances. Under Sec. 106, class meetings of the holders of different classes

of shares are to be held if the rights attaching to these shares are to be varied.

REQUISITES OF A VALID MEETING: A meeting can validly transact any

business if the following requirements are satisfied:

1. The meeting must be duly convened by a proper authority.

2. A proper notice must be served in the prescribed manner.

3. A quorum must be present.
4. A chairman must preside.
5. Minutes of the proceedings must be kept

RESOLUTIONS

KINDS OF RESOLUTIONS: There are three kinds of resolutions under the

Companies Act, 1956. They are:

1.

Ordinary resolutions;

2.

Special resolutions; and

3.

Resolutions requiring special notice

1. Ordinary resolution (Sec. 189 (1)]

An ordinary resolution is a resolution passed at a general meeting of a company

by a simple majority of votes (i.e., votes cast in favour of the resolution exceed

votes cast against it) including the casting vote of the chairman, if any).



274


When is an ordinary resolution required? Ordinary resolution is necessary for

the following among other purposes:

(a) Rectification of name or adoption of new name by a company where it

resembles the name of an existing company with the previous approval
of the Central Government [Sec. 22 (1) (a)].

(b) Issue of shares at a discount [Sec. 79 (2)]
(c) Alteration of share capital [Sec. 94 (2)].
(d) Re-issue of redeemed debentures (Sec.121).
(e) Adoption of statutory report (Sec. 165).
(f) Passing of annual accounts and balance sheet, along with reports of

Board of directors and auditors (Sec. 210).

(g) Appointment of auditors and fixation of their remuneration [Sec. 224

(1)].

(h) Appointment of first directors who are liable to retire by rotation [Sec.

255 (1)].

(i) Increase or reduction in the number of directors within the limit fixed by

the Articles (Sec. 258).

(j) Appointment of managing/whole-time director (Sec. 269).
(k) Removal of a director and appointment of a director in his place [Sec.

284(1)].

(l) Approval of appointment of sole-selling agents (Sec. 294).
(m) Winding up a company voluntarily in certain events [Sec. 484 (1) (a)].
(n) Appointment and fixation of remuneration of liquidators in a members

voluntary winding up [Sec. 490 (1)].

(o) Nomination of a liquidator in a creditors' voluntary winding up [Sec. 502

(1)].

2. Special resolution [Sec. 189 (2)]: A special resolution is one which satisfies

the following conditions:

(a) The intention to propose the resolution as a special resolution has been

duly specified in the notice calling the general meeting.



275



(b) The notice has been duly given of the general meeting.
(c) The votes cast in favour of the resolution by members entitled to vote are

not less than 3 times the number of votes cast against the resolution by
members so entitled and voting.

(d) An explanatory statement setting out all material facts concerning the

subject-matter of the special resolution including, in particular, the
nature of the concern or interest of every director and the manager, if
any, shall be annexed to the notice of the meeting.

When is a special resolution required? Special resolution is necessary for the

following among other purposes:

(a) Alteration of Memorandum for changing the place of registered office

from one state to another with the leave of the Company Law Board
[Sec. 17(1) and (2)]. Special resolution is also required for changing the
`objects clause' of the Memorandum.

(b) Changes of name of a company with the consent of the Central

Government (Sec. 21).

(c) Omission or addition of the word `Private' from or to the name of a

company (Sec. 21).

(d) Change of name of a charitable or other non-profit company by omitting

the word or words `Limited' or `Private Limited' [Sec. 25 (3)].

(e) Alteration of the Articles of a company [Sec. 31(1)].
(f) Conversion of any portion of the uncalled capital into reserve capital

(Sec. 99).

(g) Reduction of share capital [Sec. 100 (1)].
(h) Variation of shareholder's rights (Sec. 106).
(i) Removal of a company's registered office outside the local limits of any

city, town or village [Sec. 146 (2)].

(j) Keeping registers and returns at a place other than the registered office

[Sec. 163(1)].

(k) Payment of interest out of capital [Sec. 208 (2) and (3)].
(l) Applying to the Central Government for appointing an Inspector for

investigating a company's affairs in some cases [Sec. 237 (a)].



276


(m) Appointment of sole selling or buying agent in the case of companies

having paid-up share capital of Rs. 50 lakhs or more [Sec. 294-AA(3)].

(n) Fixing the remuneration of directors where the Articles require such

resolution [Sec. 309 (1)].

(o) Allowing a director to hold an office of profit under a company [Sec.

314(1) and (1-B)].

(p) Alteration of Memorandum to render the liability of directors unlimited

[Sec.323(1)].

(q) Applying to the Court to wind up a company [Sec. 433 (a)].
(r) Winding up a company voluntarily [Sec. 484 (1) (b)].
(s) Authorizing the liquidator of a company to accept shares as

consideration for the transfer of its assets [Secs. 494 (1)].

(t) Disposal of books and papers of a company in voluntary winding up

when its affairs' have been completely wound up [Sec. 550 (1) (b)].

3. Resolutions requiring a special notice (Sec. 190)

A resolution requiring a special notice is not an independent class of resolutions.

It is only a different kind of an ordinary resolution of which notice of the

intention to move a resolution has to be given to the company . The notice shall

be given not less than 14 days before the meeting at which the resolution is to be

served and the day of the meeting.



277



LESSON 8

ACCOUNTS, AUDIT AND PREVENTION OF OPPRESSION AND MIS

MANAGEMENT

ACCOUNTS: Books of account to be kept by company (Sec. 209): The Act

requires every company to maintain at its registered office proper books of

account with respect to

(a)

all receipts and disbursements of money and the matters in respect of
which the receipts and disbursements take place;

(b)

all sales and purchases of goods of the company;

(c)

the assets and liabilities of the company, and

(d)

in the case of a company engaged in production, processing,
manufacturing or mining activities, such particulars relating to utilisation
of material or labour or to other items of cost as may be prescribed by
the Central Government in the case of such class of companies. The
object of this clause is to make efficiency audit possible.

Inspection of books of account (Sec. 209-A): The books of account and other

books and papers shall be open to inspection during business hours (i) by the

Registrar; (ii) by such other officer of the Government as may be authorized by

the Central Government in this behalf. (iii) by such officers of the Securities and

Exchange Board of India as may be authorized by it.

STATUTORY BOOKS: In addition to the books of account required to be

maintained by a company under Sec. 209, the company is also required to

maintain some other books with a view to safeguarding the interest of

shareholder. Such books are called statutory books and are as follows:

1. Register of investments not held in company's name (open to inspection of

members and debenture-holders) [Sec. 49 (7)].

2. Register of charges (open to inspection of all) [Sec.143 (1)].
3. Register of members (open to inspection of all) (Sec. 150 (1)).
4. Index of members where their number is more than 50 (open to inspection



of all) [Sec. 151 (1)].

5. Register of debenture-holders (open to inspection of all) [Sec. 152 (1)].



278


6. Index of debenture-holders where their number is more than 50 (open to

inspection of all) [Sec. 152 (2)].

7. Foreign register (and a duplicate) of members and debenture-holders, if any

(open to inspection of all) (Sec. 158).

8. Minute books containing minutes of proceedings of general meetings (open

to inspection of members) [Sec. 193] (1)].

9. Books of account and annual accounts [Secs. 209 (1) 210].
10. Register of contracts, and companies and firms in which directors are

interested (open to inspection of members) [Sec. 301 (1)].

11. Register of directors, managing director, manager and secretary (open to

inspection of all) [Sec. 303 (1)].

12. Register of directors' shareholding (open to inspection of members and

debenture-holders during 14 days before and 3 days after the annual general
meeting and to the Registrar and the Central Government) [Sec. 307 (1)].

13. Register of loans made, guarantees given or securities provided to

companies under the same management (open to inspection of all) [Sec. 370
(1.C)]

STATISTICAL BOOKS: In addition to statutory books, there are many other

books which are required to be maintained for the proper and efficient running

of a company. These books are not only found to be desirable but often

indispensable in practice. Some of the important statistical or non-statutory

books are as follow:

1.

Share application and allotment book.

2.

Share call book.

3.

Register of share warrants.

4.

Register of share certificates.

5.

Register of share transfers.

6.

Register of lost share certificates.

7.

Register of balance tickets issued.

8.

Register of transfers certified.

9.

Agenda book.

10. Register of lists of dividends.
11. Dividend Mandates register.
12. Register of debenture interest.
13. Register of documents sealed.





279



14. Register of powers of attorney.
15. Register of probates.
16. Register of directors' attendance

AUDITORS: To safeguard the interest of the shareholders, the Companies Act

provides for the employment of an auditor. The auditor is the servant of the

shareholders and his duty is to examine the affairs of the company on their

behalf at the end of a year and report to them what he has found.

QUALIFICATIONS AND DISQUALIFICATIONS OF AUDITORS (Sec. 226)

Qualifications [Sec. 226 (1)]: A person shall not be qualified for appointment as

auditor of a company unless he is a Chartered Accountant within the meaning of

the Chartered Accountants Act, 1949.

Disqualifications (Sec. 226 (3)]: The following persons, even if they are

otherwise qualified, shall he disqualified from being appointed as auditors of a

company:

(a) A body corporate.
(b) An officer or employee of the company.
(c) A person who is a partner, or who is in the employment of an officer or

employee of the company.

(d) A person who is indebted to the company for an amount exceeding Rs.

1,000 or who has given any guarantee of any third person to the
company for an amount exceeding Rs. 1,000.

(e) A person holding any security of that company after a period of one year

from the date of commencement of the Companies (Amendment) Act,
2000.

APPOINTMENT OF AUDITORS (Secs. 224 and 225): Appointment in

annual general meeting: Every company shall, at each annual general meeting,

appoint an auditor or auditors to hold office from the conclusion.



280


Restriction on the appointment of auditors: A company shall not appoint or

re-appoint any person who is in full-time employment elsewhere or firm as its

auditor if such person or firm is, at the date of such appointment or re-

appointment, holding appointment as auditor of more than the specified number

of companies.

Compulsory re-appointment: At any general meeting a retiring auditor, by

whatsoever authority appointed (Board of directors, general meeting, annual

general meeting or Central Government), shall be re-appointed except in the

following cases:

(a) if he is not qualified for re-appointment;
(b) if he has given notice to the company in writing or his unwillingness to

be re-appointed;

(c) if a resolution has been passed to the effect appointing somebody instead

of him or providing expressly that he shall not be re-appointed; or

(d) where notice has been given of an intended resolution to appoint some

person or persons in the place of a retiring auditor, and by reason of
death, incapacity or disqualification of that person or of all those
persons, the resolution cannot be proceeded with [Sec. 224 (2)]



Appointment by the Central Government: Where at an annual general

meeting no auditors are appointed or re-appointed, the Central Government may

appoint a person to fill the vacancy.

Appointment of auditors by a special resolution: Sec. 224-A puts another

restriction that in the case of a company in which not less than 25 per cent of the

subscribed share capital is held, whether singly or in any combination, the

appointment or re-appointment at each annual general meeting of an auditor or

auditors shall be made by a special resolution.



281





First auditors: The first auditors of a company shall be appointed by its

Board of directors within 1 month of its incorporation.



Subsequent appointment (Sec. 225): At the expiry of the term of an

auditor, the members may, in the annual general meeting, appoint another

person in his place.



Penalty (Sec. 232): If default is made by a company in complying with

any of the provisions of Sec. 225, the company, and every officer of the

company who is in default, shall be punishable with fine which may extend to

Rs. 5,000.



Casual vacancy: The Board of directors may fill any casual vacancy in

the office of an auditor.

Removal of auditors: The first auditors of company appointed by the directors

prior to the first annual general meeting of the company may be removed by the

members in a general meeting even if their tenure of office has not expired.

Remuneration of auditors: The remuneration of the auditors of a company

shall be fixed by the company in general meeting or in such manner as the

company in general meeting may determine.

POSITION OF AUDITORS: 1.As agent of the members. 2.As officer of the

company and 3.As employee of the company

Rights and powers of auditors

1. Right of access to books, accounts and vouchers (Sec. 227).
2. Right to obtain information and explanations (Sec. 227)
3. Right to visit branch offices and right of access to books, etc. (Sec. 228)
4. Where the accounts of any branch office are audited by a person other

than the company's auditor, the company auditor shall ?



282


(a) be entitled to visit the branch office, if he deems it necessary to do

so, for the performance of his duties as auditor; and

(b) have a right of access at all times to the books and accounts and

vouchers of the company maintained at the branch office.

5. Right to receive notice of general meeting and to attend them (Sec. 231)
6. Right to receive remuneration.

Duties of auditors: 1.Acquaintance with the Articles and the Companies Act.

2.Report to members (Sec. 227). 3.Duty of care and caution.

Further duties: 1.Statutory report (Sec. 165) 2.Prospectus (Sec. 56).

3.Assistance in investigation (Sec. 240).

PREVENTION OF OPPRESSION AND MISMANAGEMENT

Special powers have been vested in the Company Law Board for the protection

of members against oppression by the majority of shareholders and for

intervention in case of mismanagement of a company's affairs. This has been

done because the cardinal rule laid down in Foss v.Harbottle, that the minority is

bound by the decision of the majority, is abused in many cases. Secs. 397 and

409 provide for remedial measures.

If the oppressed minority consider that to wind up the company would not

relieve but on the contrary, they would be unfairly prejudiced by winding up,

they may petition the Court under Sec. 397, and the Court may impose a

solution on the disputants. A certain number of members (stated below) may

apply to the Company Law Board for relief on the grounds that the affairs of the

company are being conducted:-

(a) in a manner oppressive to any member or members, or
(b) in a manner prejudicial to the interests of the company, or
(c) in a manner prejudicial to the public interest, or



283



(d) that material change has taken place in the management or control of the

company and that by reason of, it may pass any orders with a view to
bringing to an end the matters complained of, or apprehended.



If the Company Law Board is satisfied that the affairs of the company

are being conducted as complained of, it may pass any order with a view to

bringing to an end the matter complained of, or apprehended. The number of

members necessary to make application is (i) in the case of a company having

share capital, 100 members or 10 per cent of the total number of member,

whichever is less, or members holding 10 per cent of the issued capital; (ii) in

the case of a company not having share capital, 20 per cent of its total number of

members. The Central Government is also entitled to apply to the Company Law

Board for an order as above.



The Company Law Board may in its discretion make any order that it

thinks fit, and in particular, it may provide for: (i) the regulation of the

company's affairs in future, and may even frame fresh regulation; (ii) the

acquisition of the shares or interests of any members by other members or by the

company; (iii) the consequent reduction of the share capital in case of (ii) above;

(iv) termination, setting aside or modification of any agreement, howsoever

arrived at, between the company and the managing agent, secretaries and

treasurers, managing director, any other director, or manager; (v) termination,

setting aside or modification of any agreement between the company and any

other person with the latter's consent; (vi) setting aside any transfer, delivery of

goods, payment, execution or other act relating to property made or done by or

against the company within 3 months of the application which would amount to

a fraudulent preference in the case of an individual's insolvency; (vii) any other

matter for which in the opinion of the Company Law Board it is just and

equitable that provision should be made (Sec. 402). No compensation is payable



284


for loss of office resulting from the termination of agreement by the Company

Law Board. Any person whose agreement of office has been terminated cannot

act for the company for 5 years thereafter without the leave of the Company

Law Board. In addition to the above order, heavy penalties are provided.



285



LESSON 9

WINDING UP

WINDING UP BY COURT: A winding up by the Court, or compulsory

winding up, as it is often called, is initiated by an application by way of petition

presented to the appropriate Court for winding up order.

GROUNDS FOR COMPULSORY WINDING UP:

(a)

Resolved to be wound up by the Court.

(b)

If default is made in delivering the statutory report to the Registrar or in
holding the statutory meeting.

(c)

If the company does not commence its business within a year from its
incorporation, or suspends its business for a whole year.

(d)

If the number of members falls below seven (or in case of a private
company, below two).

(e)

If the company is unable to pay its debts.

(f)

If the court is of opinion that it is just and equitable that the company
should be wound up.

(g)

Just & Equitable: (a) Main object-failed (b) Deadlock in management (c)
Cannot carry on business except losses. (d) Mere bubble ? and does not
carry any business or does not have any property. (e) Majority of
shareholder have adapted an aggressive policy towards the minority.

WHO MAY PETITION: The following persons may file petition: (1) the

company; (2) creditor; (3) contributory; (4) all or any of the above parties; (5)

the Registrar; (6) any person authorized by the Central Government (7) by virtue

of Sec. 440, when a company is already being wound up voluntarily, the court

may order winding up by it.

VOLUNTARY WINDING UP: A company may be wound up voluntarily: (i)

when the period (if any) fixed for its duration has expired or an event on the

happening of which the company is to be wound up has happened and the



286


company in general meeting has passed an ordinary resolution to wind up; or (ii)

if the company passes a special resolution to wind up voluntarily (Sec. 484).

There are two kinds of voluntary winding up, namely: Member's or Creditors'.

WINDING UP UNDER SUPERVISION: Where a company is being wound

up voluntarily the Court may order the continuation of voluntary winding up

subject to its supervision with any terms or conditions. The liquidator will

continue to exercise all powers subject to any restrictions laid down by the

Court.

CONSEQUENCES OF WINDING UP

AS TO SHAREHOLDERS: A shareholder is liable to pay full amount of

shares held by him.

AS TO CREDITORS: A secured creditor may either (i)rely on the security and

ignore the liquidation, or (ii)value his security and prove for the balance of his

debt, or (iii) give up his security and prove for the whole amount. Unsecured

creditors of an insolvent company are paid in this order: (i) preferential payment

under Sec.530, (ii) other debts pari passu.

AS TO SERVANTS AND OFFICERS: A winding up order operates as a

notice of discharge to the employees and officers of the company except when

the business of the company is being continued (Sec. 444). A voluntary winding

up also operates as a notice of discharge.

AS TO PROCEEDINGS: After a winding up petition is presented the Court

may stay all proceedings against the company.

AS TO COSTS: If the company, while in liquidation, brings or defends any

action and is ordered to pay costs, they are paid first out of the assets of the

company.



287



OFFENCES ANTECEDENT TO OR IN COURSE OF WINDING UP

OFFENCES OF OFFICERS: Every past and present officer of a company

which is being wound up must assist the liquidator and if he fails to do so he is

liable to be punished. He is liable to be imprisoned up to 5 years, or fined or

given both punishments.

MISFEASANCE PROCEEDINGS: In the course of winding up a company it

appears that any person who has been guilty of any misfeasance or breach of

trust in relation to the company, the Court may, examine into the conduct of the

person, director, managing agent, secretaries and treasurers, manager, liquidator

or officer aforesaid, and compel him to repay or restore the money or property

or any part thereof respectively with interest at such rate as the Court thinks just,

or to contribute such sum to the assets of the company by way of compensation,

notwithstanding that offence is one for which the offender may be criminally

liable.

LIQUIDATORS

COMPULSORY WINDING UP: The official Liquidator attached to each

High Court will become the liquidator on a winding up order being passed.

POWERS OF LIQUIDATOR: (i) institute or defend any suit, prosecution, or

the legal proceeding in the name of the company, (ii) carry on the business of

the company for its beneficial winding up, (iii) sell company's property, (iv)

raise money on the security of the company's assets, and (v) do all other things

necessary for the winding up.

DUTIES OF LIQUIDATOR: Summon meetings of creditors or contributories

get in the property and pay the debts and distribute the balance among

contributories. Keep the proper books of account, minutes books, and allow



288


inspection thereof. Keep all the funds of the company in "the public account of

India" in the Reserve Bank of India.

VOLUNTARY LIQUIDATOR: The voluntary liquidator is appointed by

resolution in general meeting of the company and or of the creditors and his

remuneration fixed. A voluntary liquidator is a paid agent of the company and is

liable in damages if he neglects his duties as such.

DISCLAIMER BY A LIQUIDATOR: Section 535(1) empower the liquidator,
with the leave of the Court to disclaim any onerous property of the company.
IMPORTANT QUESTIONS

1.

"A company has an identity separate from its members" ? Explain the
statement critically.

2.

What do you mean by Articles of Association? What are the effects of
Articles? Can Articles be altered?

3.

State the important consequences of Mis-Statement in the prospectus.

4.

Distinguish between a share and a stock.

5.

What is a statutory meeting? What is the nature, scope and extension of
business to be transacted at such meeting?

6.

Discuss the duties of the Directors and their liabilities to the company
and third parties.

7.

What are the powers of the court in relation to the prevention of
oppression and mis-management?

8.

State the grounds on which court can order winding up of a company.

9.

What are the characteristic features and classes of debentures?

10.

Explain the statutory and statistical books that are to be maintained by a

company.



289



UNIT V

Lesson 1

FACTORIES ACT, 1948

INTRODUCTION

In common parlance, invariably factory and industry are understood as

interchangeable. This is incorrect. The term industry refers to a steady and

systematic activity in which a trade is organised, whereas a factory is the place

where such activities are being carried on.



The entire day-to-day administration of the factories is governed by the

principal Act of 1948 amended Act, which is an improvement of 1934 Act. This

Act extends to the whole of India, including Jammu and Kashmir. Unless

otherwise provided, it also applies to factories belonging to the Central and State

Governments. (Section 116)



The Bhopal tragedy of 1984 has created an awareness among the public

for preventing pollution and this has made the government to take steps in

amending the present 1948 Act by incorporating Chapter IV A from Sections 41

A to 41 H, pertaining to provisions as regards hazardous processes.

OBJECT OF THE ACT

The object of the Factories Act of 1948 is

(a) To improve health, welfare and safety of the workmen.

(b) To regulate by imposing restriction as to hours of work including

rest and provisions for availing of leave.

(c) To make stringent provisions as regards employment of women

and young persons and duration of their work.





290




MEANING OF THE TERM `FACTORY'

Factory means any premises including the precincts therefore ?

(i)

Wherein ten or more workers are working or were working on any
day of the preceding twelve months, and in any part of which a
manufacturing process is being carried on with the aid of power, or
is ordinarily so carried on, or

(ii)

Whereon twenty or more workers are working or were working on

any day of the preceding twelve months, and in any part of which a
manufacturing process is being carried on without the aid of power,
or is ordinarily so carried on.

Factory does not include a mine as it is covered by Indian Mines Act,

1952 or a mobile unit belonging to the armed forces of the Union, a railway

running shed or a hotel, restaurant or eating place.



To put it in a nutshell, factory means (i) any premises including precincts

(ii) where ten or more persons are engaged in manufacturing process with the

aid of power or (iii) twenty or more persons are engaged in manufacturing

process without the aid of power.

MANUFACTURING PROCESS ? Section 2 (k)

Manufacturing Process means any process for ?

(i)

Making, altering, repairing, ornamenting, finishing, packing,
oiling, washing, cleaning, breaking up, demolishing or otherwise
treating or adopting any article or substance with a view to its
use, sale, transport, delivery or disposal, or





(ii)

Pumping oil, water, sewage or any other substance, or

(iii)

Generating, transforming or transmitting power, or

(iv)

Composing types for printing, printing by letter press,
lithography taking photography and other similar process or book
binding;



291



(v)

Constructing, reconstructing, repairing, refitting, finishing or
breaking up ships or vessels; or

(vi)

Preserving or storing any article in cold storage [Section 2 (k)].

POWER [Section 2(g)]

It means mechanical or electrical energy transmitted as a step or aids to carry out

manufacture and not energy generated by human or animal agency. Mere use of

power not connected with activities of manufacturing will not make the

premises a factory. [New Taj Mahal Hotel vs. Inspector of Factories, (1956)

I.L.I.J.273].



Manufacturing process must be done with the aid of power, according to

Section 2 (m). Use of power may be incidental or consequential to

manufacturing process. According to Section 4, on application by the occupier

of a factory, different departments or branches of the factory may be treated as

separate factories. Likewise, two or more factories specified by the occupier can

also be treated as a single factory by the State government by passing suitable

orders.

WORKER [Section 2 (l)]

Worker means a person employed directly or through any agency (including a

contractor) with or without the knowledge of the principal employer, whether

for remuneration or not, in any manufacturing process or in cleaning any part of

the machinery or premises used for a manufacturing process or in any other kind

of work incidental to, or connected within the manufacturing process, or the

subject of the manufacturing process but does not include any member of the

armed forces of the Union [Section 2 (1)].

In order to term a person as a worker, there must be employer ?

employee relationship. That is, the employer must not only be in a position to



292


direct what work the employee should do but also how the work has to be done

by him.

Rights of workers (Section 111A inserted by 1987 Amendment Act)

A worker shall have the right to (i) obtain from the occupier information relating

to workers' health and safety at work; (ii) get trained in the factory or at a

training centre or institution when sponsored by the occupier and approved by

the Chief Inspector; and (iii) represent to the Inspector, directly or otherwise, the

matter of inadequacy of health or safety in the factory.

OCCUPIER [Section 2(m)]

Any person who has ultimate control and management over the affairs of

the factory will be deemed to be an occupier.

(i)

In a partnership firm, the individual partners and in the case of
association of individuals, members thereof shall be regarded as
occupier.

(ii)

In companies, the directors are regarded to be occupier because
they are vicariously liable for the functions of the company.

(iii)

In government owned and controlled factories, the person or
persons appointed to manage the affairs of the factory shall be
deemed to be the occupier.

(iv)

In the case of partnership firm or association of individuals, and
partner or member may be prosecuted. A manager cannot be
regarded as an occupier, unless he is entrusted with the control
and management of the factory.

(v)

Owner, lessee or a licensee having control over the factory with
regard to its management is deemed to be the occupier [Emperor
vs. Ram Pratap, (1896) 20 Bom.423].

LICENSING AND REGISTRATION OF FACTORIES [SECTION 6]

Under Section 6, the State government may make rules regarding the submission

of plans and approval, licensing and registration of factories. The site chosen to

locate the factory must have the previous permission in writing of the State



293



government of Chief Inspector of factories. Such permission will be granted to

applicant unless he had duly complied with the directions of the government.

Every application must be duly accompanied with a certified plan,

showing all the details together with the challan representing the fees payable

for such registration, licensing or renewal of licence. If permission is not granted

either by the State government or the Chief inspector, within 3 months from

the date of submission of such application, permission is presumed to have been

granted.

On the refusal of the State government to grant permission, the aggrieved

applicant can prefer an appeal within the 30 days from the date of refusal. Every

order refusing to grant permission or licence must be a speaking order (a

speaking order is an order passed after hearing both the sides and it is passed

with reasons stated). Licence or permission cannot be denied merely on the

direction by the government without hearing the applicant [Shihabudeen Kunju

vs. State of Kerala, (1985) 2L.L.J.106].



Under Section 7, the occupier must give 15 days notice to the State

government or chief inspector of factories before he begins to occupy or use any

premises as a factory. Such notice should contain the following:

(a)

The name and situation of the factory;

(b)

The name and address of the occupier;

(c)

The name and address of the owner of the premises or building
(including the precincts thereof);

(d)

The address to which communications relating to the factory may
be sent;

(e)

The nature of the manufacturing process to be carried on in the
factory during the next 12 months;

(f)

The total rated horse power installed or to be installed in the
factory (not including the rated horse power of any separate
stand-by plant);



294


(g)

The name of the manager of the factory for the purpose of this
Act;

(h)

The number of workers likely to be employed in the factory; and

(i)

Such other particulars as may be prescribed.



It is essential to intimate by notice the inspector with a copy addressed to

the chief inspector of the factories if any new person is appointed as manager in

a factory. Even an acting manager or a person without any designation as

manager will be deemed to be an occupier if control and management of the

factory is governed by them. In the absence of a designated person as manager

who ever is an occupier is deemed to be an occupier. [Kama Kishore

Jhunjhunwala vs. Prescribed Authority, (1976) 32 F.L.R.355].

Penalty for obstructing inspector (Section 9)

When a factory inspector is prevented or obstructed from exercising his powers,

such person shall be punished with imprisonment for 6 months or fine upto Rs,

10,000 or with both.

Certifying Surgeons (Section10)

Certifying surgeons are qualified medical practitioners, who are appointed by

the State government for specified areas or factories. With the approval of the

State government, a certifying surgeon may authorize and qualified medical

practitioners to exercise any of the powers used by him. However, an occupier

of a factory or any parson who becomes directly or indirectly interested in such

factory cannot be appointed as a certifying surgeon. These restrictions could be

exempted by the State Government in appropriate cases by passing orders in

writing.



295



HEALTH, SAFETY AND WELFARE MEASURES

By way of implementing the recommendation of the Royal Commission on

Labour in India, the present Factories Act, has underlined the importance of

health, safety and welfare of the workers. It has made special provisions for

health under Sections 11 to 20, for safety under Sections 21 to 40 including

Chapter IV A (1987 Amendment Act) and welfare of the workers under Sections

42 to 50.

HEALTH (SECTIONS 11 TO 20)

Cleanliness (Section 11) :

House keeping is the modern term used for

keeping the factory premises clean and tidy. Factories must not only be kept

clean but must be maintained with cleanliness in such a way that accumulation

of dirt and refuse must be avoided. Constant cleaning of effluvia (disagreeable

vapours) arising from any drain is needed. Removal of dirt and refuse alone is

not enough, but they have to be disposed of in a suitable manner without,

causing detriment to the residents of the locality.

Disposal of wastes and effluents (Section 2) : Wastes and effluents are to be

disposed of in order to maintain the hygiene inside the factory. However, such

wastes cannot be let out without treatment. This is because wastes would pollute

the surroundings. Norms laid down by the State Pollution Control Board have to

be observed strictly in this regard.

Ventilation and Temperature (Section 13): Ventilation and air circulation

ensure normal health to the workmen. In order to maintain ventilation and fresh

air circulation, temperature in the working place should be secured. For this

purpose, the interior walls and roofs of the factory must be properly designed

and provided with heat resisting or heatproof materials by way of insulation.



296


Reasonable care should be taken for colour washing interior walls with

psychologically pleasing colours such as light green, etc.

Dust and Fumes (Section 14) :

Effective measures have to be adopted in

order to prevent the workers inhaling dusts, fumes and other impurities that are

present (which cannot be seen through naked eye) in the air. Control devices or

tools have to be used for the purpose of preventing dust and fumes. Use of

exhaust fans is highly recommended in such places.

No stationary internal combustion engine is allowed to be operated

unless proper arrangements are made to prevent accumulation of injurious fume

are caused thereon. [Gregeon vs. Hick Hargreavaes (1955) All E.R.860].

Artificial Humidification (Section 15) : In factories where artificial

humidification is adopted from the point of view of manufacturing a product

(e.g., in a textile mill), the norms prescribed by the Government must be strictly

followed for increasing or decreasing or maintaining such artificial

humidification, Humidifiers for keeping air moisture at even level shall be

provided.

Water used in these plants must constantly be changed and it must be

pure. Otherwise it will give room for water borne diseases among workers.

Overcrowding (Section16) : Every worker requires at least 350 cubic feet (now

after the commencement of the Act, 500 cubic feet) for the purpose of enabling

him to work with ease and comfort ensuring mobility. However, while

calculating the aggregate space, no account shall be taken of any space, which is

more than 14 feet above the level of the floor. The Chief Inspector of Factories,

by notice may specify the number of persons to be employed in a room.

Lighting (Section17) : Too much light throws glare on normal vision. Diffused

light does not help to promote proper vision. Hence, the required light with



297



minimum power must be provided. Glazed windows and sky lights through

which rooms are ventilated have to be constantly cleaned from the inner and

outer surfaces. Glares and shadows must be avoided from distorting the vision

of eye. Otherwise, workmen would strain their eyes leading to risks.

Drinking water (Section18) : Potable, pure or wholesome drinking water shall

be made available to workmen at convenient points, A notice board must be

displayed indicating availability of such facility. The notice shall also contain

the caption,'drinking water' in local language. If the strength of the workers

increases beyond 250, cool water equipment must be provided to ensure supply

of chilled water. The points at which drinking water is supplied shall legibly

marked "Drinking water" in a language understood by a majority of employees.

Such water points must be located beyond 6 meters or any washing place,

urinals, latrine, spittoon and open drainage, carrying silage or effluent. Shorter

distance shall be permitted for locating water points only with the approval of

Chief Inspector of Factories.

Latrines and Urinals (Section 19) : For a human being, two places are very

important and both of them have to dept clean and tidy. They are ? (i) Latrines

and urinals; (ii) Places where people rest and relax.

Factories where more than 250 workers are ordinarily employed, the

latrine and urinal accommodation shall be of the prescribed sanitary type. The

floors and internal walls upto a height of 3 feet and above from the floor level

should be laid in glazed tiles. If tiles are not provided for, the latrines cannot be

dept clean, as the bad water would pass through the pores of latrine walls.

Sweepers shall be employed whose primary duty is to keep the latrines and

urinals clean and washing places tidy.



298


Spittoons (Section 20) : Spittoons are nothing but pots that are specially

provided for, into which, the workers have to spit. Workers cannot spit, as they

like, as that would spoil the cleanliness and hygiene of the factory. Sufficient

number of spittoons should be provided, taking into account the number of

persons employed. A fine of Rs.5 would be imposed on any one who violated

the rule.

SAFETY (Sections 21 to 40)

Safety is prior to security. According to this concept, the present Factories Act

ensures several safety measures as sound in Sections 21 to 40, which are

enumerated below:

Fencing of Machinery (Section 21)

In every factory the following namely,

?

Every moving part of a prime mover, and every fly-wheel

connected to a prime mover, whether the prime mover or fly-wheel
is in the engine house or not;

?

The headrace and tailrace of every water wheel and water-turbine;

?

Any part of a stock-bar, which projects beyond the headstock of a

lathe;

?

Every part of an electric generator, a motor or rotary converter;

?

Every part of transmission machinery; and

?

Every dangerous part of any other machinery must be fenced in a

secured manner by substantial construction, which should be
constantly maintained. They have to be dept in proper position
when the parts of machinery are in motion (Section 21).



The manager of the factory should take particular care to provide

safeguard devices to deep the machine in tact, so that it cannot come into

contact with workers and thereby cause injury.



299



Work on or near Machinery in motion (Section 22) :Such of those parts of

machine that are in motion may have to be constantly examined in order to

ensure that there is no friction, The examination, including lubrication on these

moving parts of the machinery must be done only by the adult male workers

with tight fitting clothes, It is better such tight fitting clothes are supplied by the

occupier.

Employment of Young persons on Dangerous machines (Section 23):

Where complex machinery is functioning in a factory, it becomes very essential

to stop any machinery either by striking a gear or for cutting off power. In old

type of machines, driving belts were mounted on fast and loose pulleys. They

were used forming part of transmission machinery. Hence, power must be cut

off in order to prevent the driving belts riding upon moving shafts. Suitable,

efficient mechanical device must be provided for instantaneously stopping the

machines.

Self-acting Machines (Section 25) : In a factory, traversing part of a self acting

machine together with a material carried on by it could be allowed to run over a

space under which any person is liable to pass.

However, such machinery shall be allowed to traverse both outward and

inward directions only beyond a distance of 45 cms from any fixed structure.

The fixed structure shall not be part of the machine. Workers must be capable of

passing under the moving part of self-acting machine in connection with their

employment.

Casing of new machinery (Section 26) : Power driven machinery, revolving

shaft, spindle wheel and pinion should be properly encased, i.e., covered and

guarded effectively. Spur wheel, helical wheel, fly wheel, friction gear not

requiring adjustments which are in constant motion should be safely encased.



300


Even hiring these machines without the safeguards is punishable with fine upto

Rs.500 and imprisonment for 3 months or both.

Prohibition of Employment of Women and Children near Cotton openers

(Section27) : Women and children are generally prohibited in being employed

in pressing cotton in which a cotton opener is at work. If the feed end of a cotton

opener is portioned by a separate wall or screen extending upto the ceiling or

roof from the delivery end, then women and children could be employed on the

side of the feeding end and definitely not at the delivery end.

Hoists and lifts (Section28) : In a factory where hoists and lifts are in use, their

construction must have been done out of quality materials with adequate

strength to withstand the strain of weight. Such lifts should be fitted with gates

and enclosures. Lifts have to be thoroughly examined at least once in six months

by competent persons, besides this, routine and other examinations have to be

conducted. Entries have to be made recording the date of examination.

Lifting machine, chains, and ropes and lifting tackles (Section29) : Lifting

machines and cranes that are used in a factory must be properly fastened and

strongly coupled with chains and ropes. These chains and ropes tied up with the

hoists sufficiently protect the lifts and cranes in contingencies like power failure

or mechanical failure. The lifts should be fitted with ropes or chains connected

with a cage so that the balance could be maintained with weights. The chief

Inspector of factories has to ensure whether these lifts and cranes including the

ropes are maintained properly.

Revolving machinery (Section 30) : In the case of use of revolving or grinding

machines, it is necessary that the optimum speed should be indicated for the safe

working of the machine. Although indications may be there signifying the

maximum speed, the optimum speed must be written on the machine for the safe



301



use of it. This would enable prevention of risk to the user and reduction of strain

to the machine. Such a notice must be displayed on the peripheral space of the

grinding stone, abrasive wheel, etc.

HAZARDOUS PROCESSES

Section 41-A-41-H: Hazardous process has become an important subject after

the Bhopal gas tragedy. Precautionary measures and for handling situations

involving hazardous processes have been highlighted under Chapter IV-A. What

is hazardous process has become a major issue, so as to enforce the provisions

under Chapter IV-A. It is for this reason; a new concept under hazardous

processes has been introduced with effect from 1.10.1987.



With view to avoid hazards, in storing, handling, transporting and using

dangerous materials, these new provisions have been provided by way of

addition to the existing ones under safety measures.

WELFARE OF WORKERS

The present Factories Act has provided several measures under Chapter V for

welfare of the workers under Sections 42 to 48, dealing with washing facilities,

facilities for storing and dressing, facilities for sitting, First-aid appliances,

canteen, shelter, rest rooms, lunch rooms and cr?ches

Washing facilities (Section 42) :

Suitable and adequate washing facilities, as

prescribed by the State government have tobe provided separately and

exclusively for male and female workers. These places should be accessible.

Facilities for storing and drying clothes (Section 43) : Suitable places must be

provided by the occupier to enable the workers to keep their clothes safe so that

there is no risk of theft in that place.

Sitting Facilities (Section 44) :

Arrangements shall be made for workers to

sit and take rest where their work involves a standing posture.



302


First Aid appliances (Section 45) : The term first aid itself signifies immediate

medical help required by the affected parties. First aid boxes containing essential

medicines, including cotton must be provided for every department with not less

than 150 workers.

Where in a factory, 500 or more workers are employed, the occupier

should provide an ambulance room, which is indispensable in the matter of

giving medical attention to workers who have e sustained serious injuries.

Canteen (Section 46) : Factories employing 250 or more workers shall provide

one or more canteens as per the rules of the State government. A managing

committee consisting of representatives of employees and employers should

manage such canteens.

Shelters, rest rooms and lunch rooms (Section 47) : Suitable shelters, rest

rooms, lunch rooms with provision for drinking water shall be provided for

every factory employing 150 or more workers.

Creches (Section 48) : Creche is a room or place for accommodating children

below the age of six. Such creche must be properly lighted and adequately

ventilated. Trained women assistants shall be employed to attend to the children

and maintain them clean and healthy.

Welfare Officers (Section49) : In factories, where 500 or more workers are

employed, there shall be such number of qualified welfare officers employed by

the management as per norms prescribed by the State government regarding

their qualification, duties and conditions of service.

WORKING HOURS, HOLIDAYS & ANNUAL LEAVE

Adult [Section 2(a)], Adolescent [Section 2(b)] and Child [Section 2(c)]



An adult is a person who has completed the age of 18. An

adolescent is a person who has completed the age of 15 but has not



303



completed the age of 18. A child is a person who has not completed the

age of 15.



It is very important to note that according to Section 67, a child

who has not completed the age of 14 cannot be employed to work in a

factory.

Working Hours

Weekly hours (Section 51): No adult worker shall be required or allowed

to work in a factory for more than 48 hours in a week. At present it is

reduced to 40 hours.



Work not done in the factory under direction of office will not be

counted. [Superintendent & Remembrancer of Legal Affairs, Bengal Vs.

J.J. Andrews, (1931) I.L.R. 50 Cal. 519].



Daily Hours (Section 54): No adult worker shall be required or

allowed to work in a factory for more than 9 hours in any day and 40

hours in a week. However, to facilitate the change of shift, this limit

may be exceeded, subject to the previous approval of the Chief Inspector

of factories.



Where work of the same kind is carried out by two or more sets of

workers working during different periods of the day, each of such sets is

called a "group" or "relay" and each of such periods is called "shift"

[Section 2(r)].

Classification of Workers : The manager of the factory shall classify

the workers into such groups, as he may deem fit and proper. This

would depend upon the nature of work, the number of workers in each

group, wherein all the adult workers are not required for such work

during the same period [Section 61 (4)]. For each group, which is not



304


required to work on a system of shifts, the manager of the factory shall

fix the periods during which the group may be required to work. [Section

61 (5)].

Group working on a system of shifts : The manager shall fix the period

during which each relay of the group may be required to work on shifts.

This is done in spite of the reason that there is already a pre-determined

schedule that has been fixed as a system specifying the shift in which the

respective relays have to work [Section 61 (6)].

Register of Adult Workers (Section 62) : Registers disclosing the

particulars of adult workers working in the factory shall be maintained

by the manager incorporating the changes from time to time. Registers

shall show (a) the name of each adult worker in the factory, (b) the

nature of his work, (c) the group, if any, in which he is included, (d) the

place or spot where his group works on shifts, the relay to which he is

allotted; and (e) such other particulars as may be prescribed.

Work in accordance with Notice (Section 63) :

All adult workers

who are required or allowed to work in the factory, shall be in

accordance with the notice periods of work as displayed on the general

notice board and in conformity with the entries made in the register of

adult workers.



It shall be the duty of the occupier or manager in the factory, not

to allow any adult worker beyond the stipulated period of hours of work.

Furthermore, he shall not allow the total number of workers to exceed

the number that has already been notified and allocated for work. The

plea of payment of overtime wages would not justify employing a worker

to do work beyond the usual hours of work.



305



HOLIDAYS (SECTIONS 52 & 53)

No adult worker shall be required or allowed to work in a factory, on the

first day of the week, which is a Sunday. This would mean that a

worker, shall have a holiday for every six days of continuous work.

However, the manager may call upon a worker to work on a Sunday. In

such cases, one day holiday must be given either out of the 3 days

preceding the Sunday or out of the 3 days succeeding the Sunday. Before

making this arrangement, a manager shall deliver a notice to the office of

the inspector expressing his intention to that effect.

Furthermore, notice must also be displayed in the factory,

intimating such change. No substitution can however be made, in such a

way that it makes a worker to work for more than l0 days consecutively.

Sunday, shall for the purpose of calculating weekly hours of work be

included in the preceding week, where any worker works on a Sunday.

Compensatory Holidays : It is mandatory that a worker shall be allowed

compensatory holidays of equal number to the holidays so lost. This

arises on account of the worker being deprived of the weekly holidays

under Section 52 made by the State Government exempting the factory

from such provisions. The compensatory holidays must be allowed to

the workman within 2 months or within a month in which the

substitution of such holidays becomes due. The manner in which

compensatory holidays has to be allowed, is prescribed by the State

Government.

ANNUAL LEAVE WITH WAGES (SECTION 79 TO 82)

Section 78 to 84 of the Factories Act deal with annual leave with wages.

If any award or agreement including settlement or contract of service



306


provides for a longer annual leave with wages under provisions of

Section 79 to 82, the worker shall be entitled to such leave. But there

cannot be any award or settlement reducing the annual leave as provided

under the Act.

RULES RELATING TO ANNUAL LEAVE WITH WAGES
(SECTION 79)
There are two cumulative conditions that are said to be mandatory for

the purpose of availing of annual leave with wages: (a) A worker should

have put in continuous years of service which means that he should have

actually worked for 240 days or more during the calendar year. (b)

During that year, for every 20 days of actual work put in by him, a

workman becomes eligible for one day rest leave in the succeeding year.

In the case of a child, one day for every 15 days of work performed

during the previous calendar year.



In spite of the fact that a worker might not have completed 240

days in a calendar year, the legal representative or nominee of such

worker shall be entitled to claim such earned wages proportionately

before the expiry of the second working day from the date of such

discharge or dismissal or quitting.



(2) However, if a worker has been superannuated or has expired,

then such earned wages must be settled before the expiry of two months

from the date of such superannuation or death [Section 79 (2)].



(3) In calculating leave period, fraction of leave of half a day or

more shall be treated as one full day's leave. The unavailed leave by a

worker shall be carried forward to the succeeding year, provided no such

accumulation of unavailed leave shall exceed 30 days in a year. In case



307



of excess, unavailed earned leave would lapse. But the number of times

the leave that may be taken during any year shall not exceed 3 times.

Other Provisions of Chapter VIII (Section 81 to 84): A worker who

has been allowed earned leave for not less than 4 days in the case of an

adult and 5 days in the case of a child, they shall be paid the wages due

for the period before their leave begins respectively. If the employer

does not make such payment, it shall be recoverable as delayed wages

under the provisions of Payment of Wages Act, 1936.

Power to make rules (Section 83): The State Government may make

rules directing managers of factories to keep registers containing

prescribed particulars and requiring the register to be available for

examination by Inspectors.

Power to exempt factories (Section 84): The State Government may

exempt a factory from the operation of the leave rules, it is satisfied that

its own leave rules provide benefits, which are not less favourable to the

workers than that of the statutory leave rules.

RECENT AMENDMENTS IN THE ACT

Government has introduced the Social Security Scheme for the unorganized

sector worker on a pilot basis in 50 districts of the Country, which was launched

on 23/01/2004. This would cover workers in the unorganized sector drawing

not more than Rs. 6500 per month.

The scheme provides,

? A flat rate pension of Rs. 500 per month on retirement at the age of 60

and total disablement. Family pension in case of death of the workers.

? A personal accident insurance cover for rupees one lakh and



308


? Universal health insurance scheme for a worker and his family at the cost

of Rs. 548 per annum for a family of 5 members or Rs. 365 per annum

for a family of 3 members.

Further, the Ministry took several measures such as labour welfare funds,

welfare fund for overseas Indian workers etc.

The Factories (Amendment) Bill, 2003 was introduced on the Lok Sabha

on July 29, 2003. The bill proposes to amend Sec. 66 of the Factories Act, 1948

so as to provide flexibility in the matter of employment of women during night

with adequate safeguard for their safety, dignity, honour and transportation from

the factory premises to the nearest point of their residence.

The Parliamentary Standing Committee on labour and welfare examined

the contents and submitted its report on August 27, 2003. The report of the II

National Commission on labour was submitted to the Government on June 29,

2002.

SUMMARY

The Factories Act, 1948 was passed with an intention of making the

work life of persons employed in factories free from hazards and

injuries. The protection is afforded to all workers ? men, women, and

children. Women and children are given special protection, as they are

considered more vulnerable. As the employer prepares the environment,

the law seeks to regulate the same in the interests of the workmen. The

law provides for scrutiny of the place and approval of plans and

specifications before they are registered under the Act for the purpose of

ensuring health, safety and welfare of the workers.







309



Appropriate standards are also prescribed. Working hours of

adults are made subject to regulations. Employment of children below

the age of 14 is prohibited. The law regulates the employment of minors

who are permitted to work. Law provides for the entitlement of annual

leave with wages. Special provisions are also envisaged to meet certain

eventualities.

Labour reforms in India, in the context of globalization is much desired,

but also feared and misinterpreted. This issue has been a sensitive one ever

since the liberalization era begins under the Narasima Rao Government in the

early 1990. In the hurry to reform and to keep up with the globalization trend

set in motion by the GATT (now replace by the WTO), the immediate forms

was on the retrenchment of surplus workers' and the closure of `SICK' Public

and Private Sector units. The TATA's were the Pioneers in introducing a

number of `Firsts' in the field of labour welfare. Well ahead of any Indian

legislation on this front, several benefits ? the eight hour working day, free

medical aid, provident fund, gratuity, leave with pay, maternity benefits were

incorporated by the TATA's their work place climate.

5.1.1 Activity

As an employee of a firm list out the restrictions that were violated by

your management regarding the employment of women and young

persons as per the provisions of Factories Act, 1948.













310


5.1.2 Activity

A worker aged 25 years has been allowed leave for 4 days. Another

worker aged 14 years has been allowed leave for 5 days. Both the

workers intend to get the wage before their leave begins. Advice the

employer.









5.1.3 Activity



Visit a factory (or look into your own organisation, if it is a factory or industrial

establishment). Study the facilities / provisions for health, safety and other

working conditions. Analyse how they compare with the provisions and

standards set in the text of the Factories Act.





























311



SELF-ASSESSMENT QUESTIONS

1.

Explain the requirements for constitution of a factory. Define a worker,
State the rights and duties of the worker.

2.

Explain and enumerate the procedure for Licensing and Registration of
Factories. State the responsibilities of the Inspector of Factories with
regard to grant and registration of license.


3.

Explain the role of the designer and manufacturer in carrying out research
work in day-to-day activities of the factories.

4.

Discuss and explain briefly health, safety and welfare measures adopted
under the Factories Act, 1948.

5.

What is hazardous process? What are all the precautionary measures and
safety measures have to be adopted under Chapter IV-A of the Factories
Act?

6.

Write short notes on:

(a)

Self-acting machines

(b) Creches

(c)

Canteen





(d)

Precaution in case of fire.

7.

Explain in detail the working hours prescribed for an adult woman
and young person, who are workers in a factory with regard to
timings, duration, overtime, etc.

8.

How a factory manager avoids double employment of workers?
What are the rules he has to observe for changing the system of
shifts for group workers?

9.

Explain the method of declaring rest day in factories. Can it be
changed according to the discretion of occupier?

10. What is meant by annual leave with wages and what are the

conditions to be fulfilled for availing of annual leave with wages?

KEY WORDS

o Administration: State Governments will administer the Act

through their own Factory Inspectors. The onus of compliance
with the provisions of the Act wholly rests on the occupier of the
Factory.



312


o Assessment: Factories Act would apply notwithstanding any

provisions inconsistent therewith in any other enactment.

o Occupier: A person who has ultimate control and management

over the affairs of the factory.

o Certifying Surgeons: They are qualified medical practitioners who

are appointed by the State Government for specified areas or
factories.



FURTHER READINGS

? Agarwal. S.L. 1980 Labour Regulations Law in India (Revised Edition),

Macmillan Company of India Ltd: Delhi.

? D.P. Jain, 1991 Industrial Law (Revised Edition), Konark Publishers Pvt.

Ltd., New Delhi.



313



Lesson 2

INDUSTRIAL DISPUTES ACT, 1947



INTRODUCTION

With the growing industrialization, the number of industrial workers in the

country is also increasing rapidly. The ownership of the industries have changed

hands from individuals to corporate houses. The expectations of workers have

changed. The lifestyle has also undergone a change. The employer-employee

relationship thus assumes a great importance in the changing scenario. Every

one expects industrial harmony; it can be achieved only through satisfactory

industrial relations.

WHAT IS INDUSTRIAL RELATIONS?

Industrial relations' is a dynamic and developing concept. It refers to the

general web of relationship normally obtaining between the employers and the

employees and includes the complex relations between trade unions and

management.

Industrial relations are an integral aspect of social relations arising out of

employer-employee interaction in modern industries, which are regulated by the

State in conjunction with organized social forces.

The Encyclopedia Britannica (1961) states of industrial relations as "a

concept extended to denote the relations of the State with employers. Workers

and their organizations. The subject includes individual relations and joint

consultations between employers and workers at their places of work; collective

relations between employers and their organizations and trade unions; and the

part played by the State in regulating these relations".





314


The State cannot remain a silent spectator in the hope that the relations

will on their own reach the state of harmony. That is why under the industrial

Disputes Act, the appropriate Government, where it feels that there may be an

industrial dispute, refers the matter to adjudication suo moto. Thus, "industrial

relations' is not merely a simple relationship; it is a functional, inter-related

complexity and requires inter-disciplinary approach.

INTEREST GROUPS IN INDUSTRIAL RELATIONS

Interest groups in industrial relations are the parties involved in it. John Dunlop

in the preface to his work "Industrial Relations System" (1958) says: "Industrial

societies necessarily create industrial relations, defined as the complex of inter-

relations among workers, managers and government,"

The interest groups, therefore, are:

? Workers and their organizations
? Managers (employers) and their organizations
? The Government

Each group has different interests and priorities. The workers and their

organizations want higher wages, good working conditions and other benefits

like medical insurance, accident benefits etc. As against these, the employers

and their organizations want maximum productivity at the lowest possible cost.

They, therefore, offer lowest possible wages, although the unit may have

capacity to pay higher wages, want long working hours and no other expenses.

The interests of the first two groups are thus conflicting.

We have, however, seen that there are attitudinal changes in both the

groups and they have realised that both of them need to be reasonable in their

approach. The third interest group is the government. It is the responsibility of

the government to ensure that there is an atmosphere of industrial peace and



315



harmony. Thus, when the government apprehends that there may be an

industrial dispute, it refers the matter for adjudication. The government

endeavours to see that the industrial harmony is maintained even when there

is an impending dispute.

INDUSTRIAL RELATIONS IN INDIA

In order to understand the issued and problems associated with industrial

relations, it is desirable to study its various evolutionary phases. Practically

speaking, the growth of industrial relations in India is in no way different from

that of other parts of the globe. The various stages of industrial relations

progressed from primitive stage to factory or industrial capitalism stage.

Ancient scriptures and laws of our country laid emphasis on the

promotion and maintenance of peaceful relations between capital and

labour. From the very early days, craftsmen and 3 workers felt the

necessity of being united. The utility of unions has been stated in Sukla

Yajurveda Samhita, "if men are united, nothing can deter them."

Kautilyas's Arthashastra gives a comprehensive picture of the

organisation and functions of the social and political institutions of India

and a good description of unions of employees, craftsmen or artisans.

There were well-organised guilds, which worked according to their own

byelaws for the management of the unions.

However, there were no organisations of workers during the

Mughal rule. The labourers were entirely dependent on their masers and

forced work was taken from them. Historical evidence further shows the

existence of rules of conduct and prescribed procedure for the settlement

of disputes for promoting cordial relations between the parties. The

working relations, however, in those days were more or less of a



316


personal character and are very much distinguishable from the present-

day industrial relations as have gradually developed with the growth of

large scale industries.

A study of modern industrial relations in India can be made in three

distinct phases.

The first phase can be considered to have commenced from the middle of

the nineteenth century and ended by the end of the First World War.

The second phase comprises the period thereafter till the attainment of

independence in 1947, and

The third phase represents the post-independence era.

OBJECTS AND SCOPE OF THE ACT

The object of the Industrial Disputes Act is to make provision for the

investigation and settlement of industrial disputes. The Act is primarily meant

for regulating the relations of employers and workmen, past, present and future.

The principal aim of the Act is to encourage collective bargaining and to

maintain industrial peace by preventing illegal strikes and lockouts and to

provide lay off and retrenchment compensation.



The Act was passed with a view to removing certain shortcomings found

in the working of the Trade Disputes Act, 1929. It came into force on the first

day of April 1947 [sec. 1(3)].



It extends to the whole of India [Sec.1 (2)]. It extends to all industries

whether they are carried on by private owners or by the Government. The Act

has been amended from time to time. The latest amendment was made in 1984.



Thus, though the main object of the Act is to provide for

investigation and settlement of industrial disputes, the amendment Act

seeks to ensure speedier resolution of industrial disputes by removing



317



procedural delays. Besides creating an efficient statutory machinery for

the settlement of industrial disputes and thereby promoting industrial

harmony, the Act also seeks to achieve certain other objects, referred to

as `certain other purposes' in the preamble.

These objects are:

? Promoting measures for securing and preserving amity and good

relations between employer and workmen.

? Enquiring into any matter connected with or relevant to an industrial

dispute.

? Promoting the settlement of industrial disputes.
? Adjudication of industrial disputes.
? Reference of individual disputes to grievance settlement authorities.
? Voluntary reference of disputes to arbitration.
? Prevention of illegal strikes and lock-outs.
? Compensation for lay-off and retrenchment of workmen.
? Provision for the payment of wages from the date of the award till the

suit pending before courts of law is decided.

? Prevention of unfair labour practices.
These objects of the Act Center round the securing of industrial harmony

and social justice.

DEFINTIONS

The following are some of the important definitions:

Appropriate Government

It means in relation to any industrial dispute concerning any industry carried on

by or under the authority of the Central Government or by a railway company,

or any controlled industry as may be specified, or n relation to an industrial



318


dispute concerning banking or an insurance company, a mine, or an oil-field or a

major port, the Central Government; and

In relation to any industrial dispute other than those specified above, the

appropriate Government would be the State Government. The general rule is

that an industrial dispute arising between an employer and his employees would

be referred for adjudication by the State Government except in the cases

mentioned above. The definition is exhaustive.

Average pay [Sec.2 (aaa)]

This clause lays down the manner of calculating the average pay for the purpose

of payment of compensation at the time of retrenchment of a workman.

The determination of average pay is to be made in a different way in the

case of

Monthly paid workmen,

Weekly paid workmen, and

Daily paid workmen.

The average pay is calculated in the following manner for the different

categories of workers:



(a)

In the case of monthly paid workmen, the average of the wages
paid for three complete calendar months;

(b)

In the case of weekly paid workmen, the average of the wages
paid for four complete weeks;

(c)

In the case of daily paid workmen, the average of the wages paid
for twelve full working days.

The period of three months, four weeks or twelve days as specified

above, must precede the day on which the average pay becomes payable. In

case a workman has not worked for the period specified above, the average pay



319



shall be calculated as the average of wags paid to the workmen for the period he

actually worked.

Award [Sec.2 (d)]

An award is an interim or final determination of an industrial dispute or any

question relating thereto and by a labour court, industrial tribunal, national

industrial tribunal or an arbitrator under Section 10-A.



Interim award means a provisional or temporary relief. Determination

implies decision one-way or the other. An order of labour Court, industrial

Tribunal or National Industrial Tribunal granting or refusing to grant any of the

relief's, which have been asked for would fall within the term `award'.

Closure [Sec.2 (cc)]

It means the permanent closing down of a place of employment or part thereof.

Public Utility Service: The phrase public utility service means.

? Any railway service or any transport service for the carriage of

passengers or goods by road, water or air;

? Any section of an industrial establishment on the working of

which the safety of the establishment or the workmen employed
therein depends;

? Any postal, telegraph or telephone service;
? Any industry which supplies power, light or water to the public;
? Any system of public conservancy or sanitation;
? Any industry specified in the First Schedule which the

appropriate government many, if satisfied that public emergency
or public interest so requires, by notification in the Official
Gazette, declare to be a public utility service for a specified
period not exceeding six months in the first instance. The
appropriate government, if necessary, may extend it from time to
time.



320


Industry [Sec.2 (j)]

In the light of the judgment in Bangalore Water Supply Case, the term `Industry'

has been defined in Sec.2 (j) as amended in 1982 as follows:



`Industry' means any systematic activity carried on by co-operation

between an employer and his workmen (whether such workmen are employed

by such employer directly or by or through any agency including a contractor)

for the production, supply or distribution of goods or services with a view to

satisfy human wants or wished (not being wants or wishes which are merely

spiritual or religious in nature). It makes no difference whether or not

(a)

Any capital has been invested for the purpose of carrying on such

activity; or

(b)

Such activity is carried on with a motive to make any gain or profit.

`Industry' includes-



Any activity of the Dock. Labour Board established under Section

5-A of the Dock Workers (Regulation of Employment) Act, 1948.



Any activity relating to the promoting of sales or business or both

carried on by an establishment.

Industrial Dispute [Sec.2 (k)]



It means any dispute or difference between

? Employers and employers;
? Employers and workmen; or
? Workmen and workmen, which is connected with

(a) The employment or non-employment

(b) The terms of employment or,

(c) The conditions of labour of any reason



321



In the ordinary language an industrial dispute is implied to mean a

dispute between the workmen and the management.

The definition of `industrial dispute' contains the following two

limitations:

o The adjective `industrial' related the dispute to an industry as

defined in the Act, and

o The definition expressly states that not disputes and differences

of all sorts but only these, which bear upon the relationship of
employers and workmen and the terms of employment and the
conditions of labour, are contemplated.

Individual and collective disputes



The industrial disputes may be (1) Individual disputes or (2) Collective

disputes.

Now Section 2A of the Act provides that where any employer

discharges, dismisses, retrenches or otherwise terminates the services of an

individual workman, any dispute or difference between that workman and his

employer connected with, or arising out of such discharge, dismissal,

retrenchment or termination shall be deemed to be an industrial dispute even if

no other workman nor any union of workman is a party to the dispute.



A collective dispute may relate to any of the following matters:

(i)

Wages, bonus, profit sharing, gratuity, compensatory and other

allowances.

(ii)

Hours of work leave with wages, holidays.

(iii)

Rules of discipline, retrenchment of workmen, closure of

establishment, rationalisation.



All collective disputes are industrial disputes and not vice versa.



322


LAY-OFF [Sec.2 (kkk0]

It means the failure, refusal or inability of an employer on account of the

shortage of coal, power or raw material or the accumulation of stocks or the

breakdown of machinery or natural calamity or for any other connected reason

to give employment to a workman whose name is borne on the muster rolls of

his industrial establishment and who has not been retrenched.

Lay-off does not involve alteration in the conditions of service. A lay off

is not the same this as the order of dismissal. It is more akin to an order of

suspension.

LOCK-OUT

It means temporary closing of a place of employment or the suspension of work

or the refusal by an employer to continue to employ any number of persons

employed by him. Under the present definition, two alternative acts of the

employer constitute a lockout.

o Temporary closing of a place of employment or suspension of work; or

o Refusal to continue to employ any number of persons employed by him.

THE FIRST SCHEDULE

The appropriate Government may, if satisfied that public emergency or interest

so requires, by notification in the official Gazette, declare any industry specified

in the First Schedule to be a public utility service for the purposes of the

industrial Disputes Act for such period as may be specified in the notification.

RETRENCHMENT [Sec.2 (oo)]

The term as used in the industrial Disputes Act means the termination by the

employer of the service of a workman for any reason whatsoever otherwise than

as a punishment inflicted by way of disciplinary action. Thus, the discharge of a



323



workman on the ground that she did not pass the test, which would have enabled

her to be confirmed, was `Retrenchment' [Santosh Gupta Vs State Bank of

Patiala, AIR (1980) SC 687.

`Retrenchment' does not, however, include-

(i)

Voluntary retirement of a workman; or

(ii)

Retirement of the workman on reaching the age of

superannuation if the contract of employment between the
employer and workman contains a stipulation in the behalf; or

(iii)

Termination of the service of a workman on the ground of

continued ill health.

SETTLEMENT [Sec.2 (p)]

It

means-

?

a settlement arrived at in the course of conciliation proceedings

which may be held by a conciliation officer or Board of

Conciliation, and includes

?

a written agreement between the employer and workmen arrived

at otherwise than in the course of conciliation proceeding where

such agreement has been signed by the parties thereto in the

prescribed manner and a copy thereof has been sent to an officer

authorised in this behalf by the appropriate Government and the

conciliation officer.

STRIKE [Sec.2 (q)]

It

means-

?

a cessation of work by a body of persons employed in any

industry acting in combination; or

?

a concerted refusal of any number of persons who are or have

been so employed to continue to work or to accept employment;
or



324


?

a refusal under a common undertaking of any number of such

persons to continue to work or to accept employment.

But mere absence of a workman from work does not amount to taking

part in a strike within the meaning of the Industrial Disputes Act, 1947. There

should be some evidence to show that his absence was the result of some concert

between him and other persons and they would not continue to work.

WORKMAN [Sec.2(s)]

`Workman' means any person (including an apprentice0 employed in any

industry to do any manual, unskilled, skilled, technical, operational, clerical or

supervisory work for hire or reward. His terms of employment may be express

or implied. For the purpose of any proceeding under this Act in relation to an

industrial dispute, `workman' includes any person who has been dismissed,

discharged or retrenched in connection with, or as a consequence of that dispute,

or whose dismissal, discharge or retrenchment has led to that dispute.

AUTHORITIES UNDER THE ACT

The Act provides for the constitution of various authorities for the purpose of

prevention and settlement of industrial disputes. These are as under ?

? Works committee
? Conciliation officers
? Board of conciliation
? Courts of inquiry
? Labour courts
? Industrial tribunals, and
? National tribunals



A brief description of the constitution, powers and duties of the various

authorities is given below:



325



1. WORK COMMITTEE (Sec.3)

Constitution: Section 3 of the Act empowers the appropriate Government to

constitute a works committee by a general or special order in a manner, which

may be prescribed. There are two conditions, which must be satisfied before a

works committee can be constituted:

(i)

The establishment must be an industrial establishment.

(ii)

One hundred or more workmen should either be presently

employed or should have been employed on any day in the
preceding twelve months.



The works committee must be composed of the representatives of the

employers and the workmen engaged in the industrial establishment and must be

equal in number. It is further provided that the representatives of the workmen

shall be chosen in the prescribed manner and in consultation with the registered

trade union.

2. CONCILIATION OFFICERS (Sec.4)

As in the case of a Works Committee, the constitution of which is left to the

discretion of the appropriate Government, so also in the case of conciliation

officers the appropriate government may as per Section 4 of the Act, appoint by

notification in the official Gazette, such number of conciliation officers as it

thinks fit.

3. BOARD OF CONCILIATION

In similar manner, a board of conciliation may also be constituted to promote the

settlement of industrial disputes. A board shall consist of a chairman and two or

four other members, as the appropriate government thinks fit. The chairman

shall be an independent person and the other members shall be person's

appointed in equal numbers to represent the parties to the dispute on the



326


recommendation of the parties concerned. If any party fails to make a

recommendation with in the prescribed time, the appropriate government shall

appoint such persons as it thinks fit to represent that party.



Conciliation proceedings before a board are similar in nature to those

before a conciliation officer. But members of the boards of conciliation enjoy

more powers than those enjoyed by conciliation officers. However, unlike a

conciliation officer, the board cannot admit a dispute in conciliation on its own;

the board has no jurisdiction until the government makes a reference to it.

4. COURTS OF INQUIRY (Sec.6)

The appropriate Government may, by notification in the official Gazette,

constitute a Court of Inquiry 9hereinafter called the court) for inquiring into any

matter appearing to be connected with or relevant to an industrial dispute

[Sec.6 (1)].

5. LABOUR COURTS (Sec.7)

The appropriate Government may, by notification in the official Gazette,

constitute one or more Labour Courts for adjudication of industrial dispute

relating to any matter specified in the Second Schedule. These courts shall also

perform such other functions as may be assigned to them under the Act

[Sec.7 (1)].

THE SECOND SCHEDULE

Matters within the jurisdiction of labour courts:

(i)

The propriety or legality of an order passed by an employer under the

standing orders;

(ii)

The application and interpretation of standing orders;

(iii)

Discharge or dismissal of workmen including reinstatement of, or

grant of relief to, workmen wrongfully dismissed;



327



(iv)

Withdrawal of any customary concession or privilege;

(v)

Illegality or otherwise of a strike or lock-out; and

(vi)

All matters other than those specified in the Third Schedule.

(vii) A labour court shall consist of one person only to be appointed by the

appropriate Government.

6. INDUSTRIAL TRIBUNALS (Sec.7-A)

The appropriate Government may, by notification in the official Gazette,

constitute one or more Industrial Tribunals (hereinafter called the tribunals) for

the adjudication of industrial disputes relating to any matter, whether specified

in the Second Schedule or the Third Schedule and for performing such other

functions as may be assigned to them under this Act [Sec. 7-A (1)].

THE THIRD SCHEDULE

Matters within the jurisdiction of industrial Tribunals.

?

Wages including the period and mode of payment.

?

Compensatory and other allowances;

?

Hours of work and rest intervals;

?

Leave with wages and holidays;

?

Bonus, profit sharing, provident fund and gratuity.

?

Shift working otherwise, than in accordance with standing orders;

?

Classification by grades;

?

Rules of discipline;

?

Rationalisation;

?

Retrenchment of workmen and closure of establishment; and

?

Any other matter that may be prescribed.

7. NATIONAL TRIBUNALS (Sec. 7-B)



The Central Government may, by notification in the official Gazette,

constitute one or more National Industrial Tribunals (hereinafter called National



328


Tribunal) for the adjudication of industrial disputes which, in the opinion of the

Central Government, involve questions of national importance or are of such a

nature that industrial establishments situated in more than one State are likely to

be interested in, or affected by, such disputes [Sec.7-B (1)].

NOTICE OF CHANGE

The object of Section 9-A of the Act is to prohibit an employer from making any

change in the conditions of service applicable to his workmen in respect of any

matter specified in the Fourth Schedule unless he has complied with the

following conditions--

1. A notice in prescribed manner of the nature of the change proposed to be

effected must be given to the workmen likely to be affected by such
change; and

2. A period of twenty-one days from the date of notice must have expired.

The appropriate Government has the power to include any other rules or

regulations in this category by notification in its official Gazette. The matters in

respect of which notice is required are enumerated in the Fourth Schedule to the

Act and are as follows

(i)

Wages including the period and mode of payment.

(ii)

Contribution paid or payable by the employer to any provident

fund or pension fund.

(iii)

Compensatory and other allowances.

(iv)

Hours of work and other rest intervals.

(v)

Leave with wages and holidays

(vi)

Starting, alteration or discontinuance of shift working otherwise

than in accordance with standing orders.

(vii) Classification by grades.

(viii) Withdrawal of any customary concession or privilege or change

in usage



329



(ix)

Introduction of new rules of discipline or alteration of existing

rules except in so far as they are provided in standing orders

(x)

Rationalisation, standardisation or improvement of plant or

technique, which is likely to lead to retrenchment of workmen.

(xi)

Any increase or reduction (other than casual) in the number of

persons employed or to be employed in any occupation or
process or department or shift not occasioned by circumstances
over which the employer has no control.

AWARD AND SETTLEMENT

Award [Sec.2 (b)] It means an interim or a final determination of any industrial

dispute or of any question relating thereto by any Labour Court, industrial

Tribunal or National Tribunal. It also includes an arbitration award made under

Sec. 10-A.

Settlement [Sec.2 (p)] It means

(a) a settlement arrived at in the course of a conciliation proceeding

which may be held by a conciliation officer or a Board or
conciliation, and includes:

(b) a written agreement between the employer and workmen arrived

at otherwise than in the course of conciliation proceedings.

(i) Where such agreement has been signed by the [parties

thereto in the prescribed manner and

(ii) A copy thereof has been sent to an officer authorised in this

behalf by the appropriate Government and the conciliation
officer.

The `Award' of a Labour Court or industrial Tribunal or National Tribunal shall

be in writing and shall be signed by its presiding officer [Sec. 16(2)].

STRIKES AND LOCK-OUTS

Meaning of Strike



According to Section 2(q) of the Act " `strike' means a cessation of work

by a body f persons employed in any industry acting in combination, or a



330


concerted refusal, or a refusal under a common understanding of any number of

persons who are or have been so employed to continue to work or to accept

employment.''

The ingredients of a strike as laid down in this section are:

(a)

Cessation of work,

(b)

Plurality of workmen who should cease to work or stop working,

(c)

Refusal should be by a concerted action or under common
understanding, and

(d)

Refusal should be by persons who are or have been so employed in
an industry.

Meaning of Lock-out

Section 2(1) defines lock-out thus: "Lock-out" means temporary closing of a

place of employment, or the suspension of work, or the refusal by an employer

to continue to employ any number of persons employed by him.

The requirements of lock-out, according to this definition are:

(a)

Temporary closure of the place of employment;

(b)

Suspension of work;

(c)

Refusal to employ;

(d)

By an employer; and

(e)

To continue to employ any number of persons employed by him.

Illegal strikes and lock-outs (Sec.24)

A strike or a lock-out shall be illegal if



(a) It is commenced or declared in contravention of Sec.22 or Sec.23; or



(b) It is continued in contravention of an order made under Sec.10 (3) or

Sec. 10-A (4-A), [Sec.24 (1)].

PENALITIES REGARDING STRIKES AND LOCK-OUTS

1.

Penalty for illegal strike [Sec.26 (1)]



331



Any workman, who commences, continues or otherwise acts in furtherance

of a strike, which is illegal, shall be punishable with imprisonment for a

term, which may extend to one month, or with fine, which may extend to

Rs.0 or with both.

2.

Penalty for illegal lock-out [Sec.26 (2)]

Any employer, who commences, continues or otherwise acts in furtherance

of lock-out, which is illegal, shall be punishable with imprisonment for a

term which may extend to one month, or with fine which may extend to

Rs.1, 000 or with both.

3.

Penalty for instigation etc. (Sec.27)

Any person who instigates or incites others to take part in, or A otherwise

acts in furtherance of, a strike or lockout, which is illegal, shall be

punishable with imprisonment for term which may extend to six months or

with a fine which may extend to Rs.1,000 or with both. In the case Raja

Kulkarni Vs. State of Bombay AIR (1954) SC 73, it was held that Sec.27 did

not impose any unreasonable restriction upon the fundamental rights

guaranteed by Articles 19(1)(a) and (19(1)(c) of the constitution.

4.

Penalty for giving financial aid for illegal strike and lock-out(Sec.28)

Any person who knowingly expends or applies any money in direct furtherance

or support of any illegal strike or lock-out shall be punishable with

imprisonment for a term which may extend to six months, or with fine which

may extend to Rs.1, 000 or with both.

There was a sharp decline in the number of strikes and lockouts during 2003

as compared to the previous year. The reduction was more prominent in the

Public Sector.



332


The total Mandays lost on account of strikes and lockouts have declined by 4.80

million in 2003.

STRIKES

STRIKES & LOCKOUTS

TOTAL

YEAR

Mandays

Mandays

Mandays Lost

Number

Lost

Number

Number

Lost

(in million)

(in million)

(in million)

1998

1097

665

9.35

432

12.71

22.06

1999

927

540

10.62

387

16.16

26.79

2000

771

426

11.96

345

16.80

28.76

2001

674

372

5.56

302

18.20

23.77

2002

579

295

9.66

284

16.92

26.58

2003

489

244

2.00

245

20.00

22.00





* Source ? Labour Bureau, Shimla

LAY-OFF AND RETRENCHMENT

Meaning of lay-off

According to Section 2(kkk) lay-off (with us grammatical variations and cognate

expressions) means the failure, refusal or inability of an employer to give

employment to a workman, whose name is borne on the muster roll of his

industrial establishment and who has not been retrenched. They lay-off may be

due to shortage of coal, power or raw materials or the accumulation of stocks or

breakdown of machinery.



A workman shall be deemed to be laid off for the day if he presents

himself for work at the appointed time during normal working hours on any day

and the employer does not give employment to his within two hours of his so

presenting.

Meaning of retrenchment [Sec 2 (oo)]



Retrenchment means the termination by the employer of the services of a

workman for any reason whatsoever, otherwise than as a punishment inflicted

by way of disciplinary action. It, thus, implies this discharge of surplus labour



333



or staff by the employer for any reason whatsoever. [Harprasad Shiv Shanker

Shukla Vs A.D.Diwelkar, AIR 1957 SC 121]

Retrenchment, however, does not include-



Retrenchment of worker either (a) voluntarily, or (b) on reaching

the age of superannuation if the contract of employment between
the employer and the employee concerned contains a stipulation
in that behalf;



Termination of the service of workman on the ground of

continued ill health;



Termination of the service of the workmen as a result of the non-

renewal of the contract of employment provided a stipulation in
that behalf is contained in the contract.

SOME DISTINCTIONS

1.Lay-off and lock-out

Both lay-off and lock-out resemble each other in some respects. Both are of a

temporary nature and arise out of an emergency, though the nature of

emergencies in each case is different. Both in lay-off and lock-out the

relationship of employer and workmen is only suspended and is not terminated.

However, there are following points of distinction between lay-off and lock-out:

(i)

Lay-off generally occurs in a continues business, whereas lock-
out is closure of business for the time being.

(ii)

In case of lay-off the employer is unable to give employment to
one or more workmen on account of the reasons specified in
Section 2(kkk), whereas in case of lock-out the employer
deliberately closes the business for reasons, which have no
connection with the causes specified in Section 2(kkk).

(iii)

In case of lay-off, the employer may be liable to pay
compensation as provided in Section 25-C, but this liability
cannot be invoked in case of lock-out. The liability of the
employer in cases of lock-out will depend upon whether the lock-
out was justified and legal or not.





334


(iv)

Lock-out is resorted to by the employer as a weapon of collective
bargaining while lay-off is due to trade reasons.

(v)

The Act imposes certain penalties on lock-out but there are none
in case of lay-off.

2. Lay off and closure

A lay-off is different from closure of business. Lay-off does not mean closing

of the business. Lay off means temporary suspension and not discontinuance of

the business. Closure, on the other hand, means closing of the business

permanently or temporarily for an indefinite period by the management.



In the case of closure there in no question of laying-off workers. The

workers are discharged i.e. relationship of employer and workman comes to an

end.

3. Lock-out and closure

The distinction between the closure and the lock-out is well settled. In case of a

closure, the employer does not merely close down the place of business, but he

closes business itself while lock-out indicates the closure of the place of

business and not the closure of the business itself. Lock-out means suspension of

the work and a discontinuance of the carrying on the business.



If an employer shuts down his place of business as an instrument of

coercion, or as mode of exerting pressure on the employees there would be lock-

out. If, on the other hand, he shuts down his work because he cannot, for

instance, get the raw materials or because he is unable to sell the goods or

because he is losing money, that would not be a lock-out.

4. Lock-out and retrenchment



The points of distinction between lock-out and retrenchment are as

follows:

(i)

Lock-out is temporary while retrenchment is permanent



335



(ii)

In case of retrenchment the relationship of employer and

employee comes to an end at the instance of the employer, in
case of lock-out the relationship is only suspended, it does not
come to an end.

(iii)

Lock-out is with a motive to coerce the workmen; while the

intention behind retrenchment is to dispense with surplus labour.

(iv)

Lock-out is due to an industrial dispute, while in the case of

retrenchment there is no such dispute.

SUMMARY

It is gratifying to note that apart from the fundamental rights, our Constitution

embodies within itself, in Part IV, Directive Principles of State policy. The

functions and duties of the states as contained in the directive principles have

given rise to the concept of social justice. The old idea of laissez faire has given

place to a new idea of welfare state. The philosophy of social, economic and

political justice have been given a place of pride in our Constitution, as well as

in the aims and objectives of ILO. The development and growth of industrial

law presents a close analogy to the development and growth of constitutional

law. A series of labour enactments covering labour welfare and social security

were enacted for protecting and promoting the overall welfare of different

categories of working class. The central and some state governments have

enacted laws on industrial relations. The three enactments by the central

government in the field of industrial relations are (a) the Trade Unions Act,

which provides for registration of trade unions;(b) the Industrial Employment

(standing orders) Act which makes provision for certification of standing orders;

and (c) the Industrial Disputes Act which lays down a machinery for the

prevention and settlement of industrial disputes.







336


5.2.1. Activity

Analyse adjudication system in India. Discuss the jurisdiction, power

and function of the Industrial Disputes Act, 1947.













SELF-ASSESSMENT QUESTIONS

1. What are the consequences of labour being included in the concurrent list of

the Indian constitution?

2. What are the fundamental right and directive principal under the Indian

constitution

3. What is the procedure for registration of a trade union under the trade unions

act?

4. On what objects general and political funds are spent under the Trade

Unions Act?

5. What is the procedure for certification of standing orders under the Industrial

Employment (Standing Orders) Act?

6. What are the omissions and commissions on the part of a workman, which

amount to misconduct?

7. What are the provisions regarding strikes and lockouts under the Industrial

Disputes Act?

8. What are the provisions under the Industrial Disputes Act for settlement of

industrial disputes?








337



KEY WORDS


o Industrial Tribunal: This is also a one-man body (Presiding Officer) to

resolve matters listed in the Third Schedule of the Industrial Disputes
that are referred to it by the appropriate Government.


o National Tribunal: The third adjudicatory body provided by the Act to

deal with industrial disputes involving `questions of national importance'
where more than one state is affected.

FURTHER READINGS

? Agarwal, S.L., Labour Relations Law in India, Macmillan

Company of India Ltd., New Delhi, 1978

? Indian Law Institute, Labour Law and Labour Relations Cases

and Materials, N.M. Tripathi Pvt. Ltd, Bombay, 1987.

? Mallick, P.L., Industrial Law, Eastern Book Company, Lucknow,

1989.



338


Lesson 3

MINIMUM WAGES ACT, 1948

INTRODUCTION

The Minimum Wages Act of 1948 is not only a measure of social security for

the poverty stricken workers, but it is also a device for improving the standard of

living of the downtrodden and thereby paving the way for their betterment and

ultimate welfare.



The continuing tendency among the employer is only to exploit

the labourers who happen to be illiterates and who never possessed the

necessary prowess to fight against the ingenuity of the employers.

The Minimum Wages Act

(i)

Assures wages so as to help the workers to eke out their

livelihood, at least to an extent of sustaining the adversities,
namely, rise in the cost of living.

(ii)

Prevents the employers from exploiting the labourers by

paying wages far below their needs; and

(iii)

Lays down principles for fixation of wages on a need based

scale.

DEFINITION

Though Minimum Wages has not been defined anywhere in the Minimum

Wages Act, it can be defined generally. In common sense, minimum wages is

the bare subsistence money required by the worker not only to meet the basic

needs such as food, shelter and clothing but it is also includes monies required

for medical expenses, education for children and traveling expenses to a worker

in a family. Family consists of husband, wife, and two children.

OBJECTS AND SCOPE OF THE ACT

The Minimum Wages Act contemplates



339



(i)

The wages that are paid to the workers should meet their physical
needs and at the same time.

(ii)

Keep them above starvation level.

(iii)

It should ensure sustenance for their family; and

(iv)

Also enable them to subsist by preserving their efficiency as
workmen in day-to-day life.

Norms to be followed for fixation of minimum wages

(a) Irrespective of the financial adversities and other problems, an

employer, has to pay compulsory minimum wages to his
workmen.

(b) Wages paid to workmen must be sufficient to provide, a standard

family, with food, shelter, clothing, medical care and education
for their children. This is known as fair wage.

(c) (i)Fair wage is not a living wage. It is a mean between living

wage and minimum wage. The minimum wage itself is slightly
above the bare minimum. [Sandash Ltd., Vs. Union of India
A.I.R. (1958) S.C. 578]

(ii) Living wage meets the normal ne4ds of an average worker as a human

being, living in a civilized society. Living wage not only ensures bare physical

subsistence, but also maintenance of health and decency, conducive to the

general interest of the public. [Bijoy Cotton Mills. Vs. State of Ajmer A.I.R.

(1955) S.C.33.]

(iii)

Concept of minimum wage, fair wage and living wage is

bound to change in accordance with the growth and development of

industries and living standard of the employees. [Standard Vacuum

Refining Co. of India vs. Its Workmen A.I.R. (19610 S.C. 895]

(iv)

Fair wage, although may be set at the level of minimum

wage at the beginning, yet, it can be enhanced in gradual stages

depending upon the capacity of the industry to pay. Hence, the lowest

limit of fair wages is at the level of minimum wage and its upper limit



340


may be enhanced to the level of living wage. [Express News paper Pvt.

Ltd. Vs. Union of India A.I.R. (1959) S.C.R. 12]

(d) (i)

Wages required by the employees is more relevant than

the financial capacity of the industries to meet the requirement of
the labourers. [Arbuda Bhavan vs. State of Maharashtra 91991)
Lab.I.C. 1671 Bom.]
(ii) Satisfaction of the workers from the point of view of
providing them a suitable pay packet serves as a good dev ice to
motivate the workers to contribute to the growth of the industries.
[Hindustan Antibiotics Ltd. Vs. Their Workmen A.I.R. (1967)
S.C.948.]


(e) Minimum wages are paid solely on the requirements of the

worker of the family.

(f) The directive principals of the State policy in Article 43 of the

Indian Constitution imposes an obligation on then State to
formulate suitable legislation in providing economic
organisations in the form of industrial nits in such away so as to
ensure a living wage to workmen.

COMPONENTS IN THE MINIMUM WAGE

It must be understood that wages that are paid to a workman is not paid

exclusively to him, but it is paid to his family as a unit. Therefore, such a wage

should enable a worker to sustain his family by meeting certain necessary

expenses which are inevitable; such as

(a) Medical expenses

(b) Expenses to meet education for his children; and

(c) In some cases, transport charges

CONCEPT OF MINIMUM WAGE

Minimum wages that are fixed for workmen has some significance:

(a) Minimum wages are not fixed on Equation principle, namely, money

payable towards wags must be commensurate with the labour output.



341



(b) Equally, minimum wages are not based on the Economic principle,

namely those who are able financially, must be capable of paying
more to the workers.

(c) On the other hand, it is based on Ethical principle of pre-judging and

assessing the needs of a workman and his family as a unit and
making provision for his wages. To put it in a nutshell, minimum
wages are considered to be need-based wages, which is according to
the directive principle of our Constitution.

COST OF LIVING INDEX [Section 2 (d)]

The framework of minimum wags hinges on cost of living index, now known as

Consumer Index. Cost of living forms an integral part in the fixation of wages

for workers. But then, the cost of essential commodities increases now and then

because of which a workman finds it hard to lead his life. The essential

requirements for providing a staple food consisting of protein, carbohydrates,

fat, vitamin, etc., are computed and calculated in terms of price from the

available essential commodities.

Calculation of Cost of Living Index: Upto 100 points they merge with

the salary. Over and above 100 points, when there is an increase in the cost of

these essential commodities, the workers find it difficult to procure these

commodities to eke out their livelihood. This renders the position of a workers

equivalent to a stage termed as `between the cup and the lip."

MINIMUM WAGES, FAIR WAGES AND LIVING WAGES

Fixation of wage is no doubt a subtle task, which requires a device for balancing

the demand of social justice and the need for improving the sources of national

income from the pint of raising he standard of living.



Payment of wages is mandatory. Irrespective of the fact whether an

industry is big or small. Whether it makes profit or not, minimum wages must be

paid to the workmen concerned. A human being must always be allowed to lead



342


a docent life; hence it is not permitted to pay wages, which is hardly sufficient to

make the workman to keep his body and soul together.



Minimal requirements of the worker concerned should be provided under

minimum wages. A living wage has been define4d as the wage received for

normal needs of an average employee regarded as a human being living in a

civilized community. A living wage enables a worker to enjoy comfort in life.



The wages mentioned above are not static as they keep on changing

according to the economic scenario of the nation. To neutralize or standardize

the two extreme wage limits, namely, minimum wage and living wage, concept

of fair wage is introduced as a via media, as given below:

Ideal wage







Living wage



Fair wage



Minimum wages



A fair wage is said to be a mean between minimum wage and living

wage. Every attempt was made to introduce a fair wage, but then it could not be

fixed at the upper limit. Hence, sometimes, fair wage also descends to the level

of minimum wage.



Minimum wage is said to be the starting stage from the point of view of

offering social security to workmen. Laborer's demand should always be

viewed with sympathy and hence minimum wages must be paid compulsorily.

If an employer is unable to pay even minimum wages or it becomes impossible

on his part to carry on his business, then it would be better for his to close his

business.



343





For the purpose of understanding the Minimum Wages Act, it essential

to know the following definitions contained in the Act

"Appropriate Government' [Section 2(b)] means-

(a) In relation to any scheduled employment carried on by or under

the authority of the central Government or a railway
administration or in relation to a mine, oil-field or major port, or
any corporation established by the Central Government, and

(b) In relation to any other scheduled employment, the State

Government.

(c) Competent authority means the authority appointed by the

appropriate Government by notification in its official Gazette to
ascertain from time to time the cost of living index number
applicable to the employees employed in the scheduled
employment specified in such notification;

(d) "Cost of living index number" in relation to employees in any

scheduled employment in respect of which minimum rates of
wages have been fixed, means the index number ascertained and
declared by the competent authority by notification in the official
Gazette to be the cost of living index number applicable to
employees in such employment;

(e) "Employer" means any person who employs, whether directly or

through another person, or whether on behalf of himself or any
other person, one or more employees in any scheduled
employment in respect of which minimum rates of wages have
been fixed under this Act, and includes, Except in sub-section (3)
of Section 26;

(f) "Prescribed" means prescribed by rules made under this Act;
(g) "Scheduled employment" means an employment specified in

then Schedule, or any process or branch of work forming part of
such employment;

(h) "Wages" means all remunerations, capable of being expressed in

terms of money, which would if the terms of the contract of
employment, express or implied, were fulfilled, be payable to a
person employed in respect of his employment or of work done
in such employment and includes house rent allowance.

(i) "Employee" means any person who is employed for hire or

reward to do any work skilled or unskilled, manual or clerical, in
a scheduled employment in respect of which minimum rates of



344


wages have been fixed; and includes an out-worker to whom any
articles or materials are given out by another person to be made
up, cleaned, washed, altered ornamented, finished, repaired,
adapted or otherwise processed for sale for the purposes of the
trade or business of that other person where the process is to be
carried out either in the home of the outworker or in some other
premises not being premises under the control and management
of that other person; and also includes an employee declared to
be an employee by the appropriate Government; bout does not
include any member of the Armed Forces of Union.

FIXATION AND REVISION OF MINIMUM AWAGES

Fixation and revision of minimum wags could be studied under the following

three heads.

I. Fixation of minimum wages, how it is done and to whom it is
applicable (Section3).
II. Contents of minimum wages (Section 4).
III. Procedure for fixing and revising minimum wages (Section 5).


Sections 3,4 and 5 are said to be the operative sections under the

Minimum Wages Act.

FIXATION OF MINIMUM WAGES [Section 3]

The responsibility for fixing the minimum rates of wages is that of the

appropriate Government. Section3 provides that the appropriate Government--

(a) Shall fix the minimum rates of wages payable to employees

employed in an employment specified in Part I or Part II of the
Schedule to the Act and in an employment added to either part by
notification in the official Gazette [Sec.3 (1)(a)].

(b) May, in respect of employees employed in an employment

specified in Part II of the Schedule, instead of fixing minimum
rates of wages for the whole State, fix such rates for a part of the
State or for any specified class or classes of such employment in
the whole State or part thereof [Provision to Sec. 3(1)(a)].





345



(c) Shall review at such intervals not exceeding five years, the

minimum rates of wages so fixed and revise the minimum rates if
necessary [Sec.3 (1)(b)].

PROCEDURE FOR FIXING AND REVISING MINIMUM WAGES
(Sec.5)
In fixing minimum rates of wages in respect of any scheduled employment for

the first time or in revising minimum rates of wages so fixed, the appropriate

Government shall follow either of the following methods:

(i) It shall appoint as many committees and sub-committees as it

considers necessary to hold enquiries and advise it in respect of
such fixation or revision, as the case may be: or

(ii) It shall, by notification in the official Gazette, publish its

proposals, for the information on persons likely to be affected
theory and specify a date, not less than two months from the date
of the notifications on which the proposals will be taken into
consideration [Sec.5 (1)].

SAFEGUARDS IN PAYMENT OF MINIMUM WAGES

Wages in kind (Sec.11). Minimum wages payable under this Act shall be paid

in cash [Sec.11 (1)].

But where it has been the custom to pay wages wholly or partly in kind, the

appropriate Government may by notification in the official Gazette, authorize

the payment of minimum wages either wholly or partly in kind [Sec.11 (20].



The appropriate Government may by notification in the official Gazette

authorize the provision of the supply of essential commodities at confessional

rates [Sec.11 (3)].



Payment of minimum rates of wages (Sec.12). Where in respect of

any scheduled employment minimum wages have been fixed, the employer shall

pay to every employee wages at a rate not less than the minimum rate of wages

fixed for that class of employees in the employment.



346




Such wages shall be paid without any deductions except as may be

authorized. Where the contract rate of wages is higher, the statutory obligation

does not come into play [Sec.12 (1)].



Section 12 of the Act does not affect the provisions of the Payment of

Wages Act, 1936 [Sec.12 (2)].

ENFORCEMENT OF THE ACT

INSPECTORS (Sec.19). The appropriate Government may, by notification in

the official Gazette, appoint inspectors for the purposes of this Act, and define

the local limits within which they shall exercise their functions [Sec. 19(1)].

The powers and functions of the inspectors so appointed are almost

similar to those of the inspectors appointed under the Payment of Wages Act,

1936. The inspectors have e to see that the provisions of the Minimum Wages

Act are complied with.

CLAIMS (Sec.20). The appropriate Government may, by notification in the

official Gazette, appoint an Authority to hear and decide for any specified area

all claims

(a) arising out of payment of less than the minimum rates of wages; or
(b) in respect of the payment of remuneration for the day of rest under

Sec.13 (1)(b) or for work done on days of rest under Sec.13 (1)(c);

(c) in respect of wages at the overtime rate under Sec. 14 to employees

employed or paid in that area [Sec.20 (1)].

OFFENCES AND PENALTIES

Penalties for offences (Secs.22 and 22-A). Any employer who--

(i)

Pays to any employee less than the minimum rates of wages fixed for
that employee's class of work, or less than the amount due to his
under the provision of this Act; or

(ii)

Contravenes any rule or order made under Sec.13,



347



Shall be punishable with imprisonment for a term, which may extend to six

months, or with fine, which may extend to Rs.500, or with both [Sec.22].



In imposing any fine for offence under Sec.22, the court shall take into

consider on the amount of any compensation already awarded against the

accused in any proceedings taken under Sec.20 (Proviso to Sec.22).



Further, any employer who contravenes any provision of this Act or of

any rule or order made there under shall, if no other penalty is provided for such

contravention by the Act, be punishable with fine which may extend to Rs. 500

[Sec.22-A].

CONTRACTING OUT [Sec.25]

According to the Section 25 of the Act, any agreement or contract between the

employer and the employee by which the employee gives upon his right to

minimum, wages or any privilege or concession accruing to his under the Act is

null and void, in so far it purports to reduce the minimum rate of wages fixed

under the Act. I it immaterial whether the contract or agreement was entered

into either before or after the commencement of the Act.

EXEMPTIONS AND EXCEPTIONS (Sec. 26)

The appropriate Government may--

(a) Direct that provisions of this Act shall not be applicable in relation to

the wages payable to disabled persons [Sec 26(1)].

(b) Direct by notification in the official Gazette that the provisions of the

Act or any of them shall not apply to all or any class of employees,
employed in any scheduled employment [Sec.26 (2)].

(c) Exempt some specified employments from the application of some or

all the provisions of this Act [Sec 26(3)].

Nothing in this Act shall apply to the wages payable by an employer to a

member of his family who is living with him and his dependent on him. A



348


member of the employer's family includes his or her spouse or child or parent or

brother or sister (Explanation to Sec 26(3)].

RECENT AMENDMENTS IN THE ACT

On the basis of recommendations of Central Advisory Board in its meeting held

on December 19, 2003, the National Minimum Wage has been raised from Rs.

55 to Rs. 66 per day with effect from February 1, 2004.

This act is of interest to women workers, as it sets minimum wages for

employees, which include those working on a temporary basis, Piece rate

workers and workers paid daily wages. In addition, no employee can be asked

to work more than 9 hours a day without additional wages being paid and the

normal working hours must be fixed.

SUMMARY

This act aims at statutory fixation of minimum wages with a view to prevent the

exploitation of workers. It seeks to achieve social justice to workers by securing

the enjoyment of minimum wage fixed under the law. There are three levels of

wage. They are the living wage, the fair wage and the minimum wage. The

components of the minimum wage are set by the standards necessary to cover

the basic needs of the workman and to preserve his efficiency. Receipt of the

subsistence plus wage fixed under the Act is declared to be the fundamental

right under Articles 23 and 21 of the Constitution. The responsibilities

fundamental to the scheme envisaged under the Act are two fold. Firstly, the

responsibility of fixing and revising the minimum wage is apportioned between

the central and state governments. Secondly, the consequential responsibility of

paying the same to the workmen is laid on the employer, both public and

private, governed by the Act.



349





Two methods are envisaged for fixation and revision of the minimum

wage. They are substantially similar. Choice of the mode is left to the

discretion of the government. Based upon the necessity, the government may

either appoint a committee for enquiry and advice or formulate the proposal and

publish the same inviting objections. A separate machinery is constituted for

hearing and deciding the claims under Act. With a view to ensure quick and

inexpensive justice, summary procedure is envisaged.

5.3.1. Activity

Consider yourself as an employee of an engineering company and your brother

was employed in the factory where the minimum rate of wages has been fixed

by the appropriate government. The employer has not paid minimum wages to

your brother. Advice your brother.









5.3.2. Activity

Comment and State whether the following statements are correct. (1) The

components of minimum wages may be ? basis rate of wages plus cost of living

allowance. (2) The components of minimum wages may be ? basis rate plus

cost of living allowance plus cost value of concession regarding supplies of

essential commodities at concesstional rates.









350


SELF-ASSESSMENT QUESTIONS

1. Describe hoe the scale of minimum wage is fixed from the point of view of

its contents regions and duration of hours of work.

2. State the constitution, role and function of the Advisory Committee under

the Minimum Wages Act.

3. State the measures prescribed under the Minimum Wages Act for

implementation of the provisions of the Act.

4. What are the penalties provided under this Act for non-payment of

minimum wages? State the remedies available for the aggrieved party.

5. Write short notes on:

(a) Committee

method

(b)

Notification

method

(c) Minimum

rates (d)

Contracting

out

KEY WORDS

o Minimum Piece Rate System: Minimum wages fixed by the employer

for the production of a single piece.

o Minimum Time Rate System: Minimum wages fixed in accordance

with the working hours by the employer.

o Administration: Advisory Committees or Boards appointed by the

appropriate government fix and revise the minimum wages and to advise
the Central or State Government as the case may be, in the matter.

FURTHER READINGS

? Agarwala, S.L., 1978, Labour Relations Law in India, Macmillan:

Madras, Government of India, 1969. Report of the National
Commission on Labour. New Delhi.



? Misra, S.N., 1983. Labour And Industrial Laws, Pioneer Publications:

Delhi.



351



Lesson 4

WORKMEN'S COMPENSATION ACT, 1923



INTRODUCTION

The Workmen's Compensation Act, 1923, was the first social security measure

introduced in Indian prior to independence. The statement of objects and

reasons appended to the Bill at the time of its introduction clearly indicates the

need to protect workmen from hardship arising from accidents due to the

complexity of modern industry.

OBJECT AND SCOPE OF THE ACT

The Act considers compensation payable by an employer to his workmen in the

case of an accident as a measure of relief and social security. It enables a

workman to get compensation irrespective of his negligence. It also lays down

the various amounts payable in case of an accident depending upon the type and

extent of injury. The employer now knows the amount of compensation he has

to pay and is saved of many uncertainties to which he was subject before the Act

came into force.

Accordingly, payment of compensation is the main object of the Act. But

yet, it seeks to reduce the number of accidents, mitigates the effect of accidents

by providing suitable medical treatment, makes the industry more attractive to

labour, increases labour efficiency and provides for a cheaper and quicker

disposal of disputes relating to compensation, through special tribunals.

DEFINITIONS

Section 2 gives the definitions of the terms used in the Act. Some of the

important definitions are as follows:





352


PARTIAL DISABLEMENT [SECTION 2(1)(g)]

A disablement may be partial or total. A partial disablement only reduces the

earning capacity of a workman, while a total disablement incapacitates a

workman, from all work, which he was capable of performing at the time of the

accident. Partial disablement may be of temporary or permanent nature.



A temporary partial disablement means any disablement, which

temporarily reduces the earning capacity of workman in any employment in

which he was engaged at the time of the accident causing the disablement.

TOTAL

PARTIAL

100 % or More

Less than 100 %



Permanent partial

Permanent Total

(Could be engaged in all other

(Cannot do any work)

jobs at reduced salary)





Temporary Total

Disablement

Temporary Partial

(Cannot be employed in

(Can be employed in the

the original work with full original job at reduced salary)

salary)





A permanent partial disablement means such a disablement as

permanently reduces the earning capacity of workman in every employment,

which he was capable of undertaking at the time of the accident causing the

disablement. But, every injury specified in part II of schedule I of this Act shall

be deemed to result in permanent partial disablement.









353





PERMANENT

TEMPORARY

(Disablement or being unfit for all jobs)

(Disablement or being unfit for that job originally done)



The distinction between these two types of disablement depends on the fact as to

whether an injury results in reduction of earning capacity in all the employments

hich the workman was capable of doing or only in that particular employment in

which workman was engaged at the time of accident.

TOTAL DISABLEMENT [SECTION 2 (1)(l)]



Total disablement means such disablement as incapacitates a workman

for all work which he was capable of performing at the time of the accident

resulting in such disablement. In order to constitute total disablement,

disablement must be of such a character that the person concerned is unable to

do any work and not merely the work, which he was performing at the time of

the accident.

A total disablement may be temporary or permanent. A permanent total

disablement shall be deemed to result from

(a) The permanent total loss of the sight of both eyes; or

(b) From an injury specified in Part I of Schedule I or from any

combination of injuries specified in Part II thereof where the

aggregate percentage of the loss of earning capacity as specified in

the said Part II against those injuries, amounts to one hundred per

cent or more.

A carpenter suffered injury in the course of his employment, which

resulted in amputation of left hand above elbow. Since a carpenter cannot work

with one hand, disablement was held to be total and not partial [Pratap Narain

Singh Deo Vs Srinivas Sabata and another [AIR (1976) SC 222].



354


EMPLOYER'S LIABILITY FOR COMPENSATION



Section. 3 provides for employer's liability to pay compensation to a

workman. It lays down that the following conditions must exist before an

employer may be held liable to pay compensation to a workman



(1) Some personal injury must have been caused to a workman;

(2) Such an injury must have been caused by an accident;

(3) The accident must have arisen out of and in the course of

employment; and

(4) The injury must have resulted either in the death of the workman or

in his total or partial disablement for a period exceeding three days.

But the employer shall not be liable (except in the case of the injury

resulting in the workman's death) to pay compensation in the following cases

(1) If the injury did not result in total or partial disablement of the

workman for a period exceeding three days;

(2) If the workman was at the time of the accident under the influence

of drink or drug, or

(3) If the workman willfully disobeyed an order expressly given or a

rule expressly framed for the purpose of securing safety of

workman; or

(4) If the workman willfully removed or disregarded any safety guard

or other device which to his knowledge was provided for the

purpose of securing his safety.

In the case of disease, no compensation shall be payable to a workman in

respect thereof, unless the same is directly attributable to an injury caused by an

accident arising out of and in the course of his employment.



355



But in respect of the occupational diseases, specified in Schedule III of

the Act, contracted by a workman it shall be presumed that the contracting of the

disease amounts to an injury caused by an accident arising out of and in the

course of his employment.

ACCIDENT OUT OF EMPLOYMENT



An accident arising out of employment implies a `casual connection'

between the injury and the accident and the work done in the course of

employment. Employment should be the distinctive and the proximate cause of

the personal injury whether physical or mental. In the case Dennis Vs White,

(1917) A.C.479, it was laid down that "when a man runs a risk incidental to his

employment and is thereby injured, the injury arises out of employment."

ACCIDENT IN THE COURSE OF EMPLOYMENT



It suggests duration of employment or the period of time during which he

employment continues. In the case Saurastra Salt Mfg. Co. Vs Bai Balu Raja

(1958) SC 881, the Supreme Court held "as a rule the employment of a

workman does not commence until he has reached the place of employment and

does not continue when he has left the place of employment".



Following points in this connection are important to note.

1. All movements of a worker from one place to another whether within

the premises of the employer or to the premises of some other person

in connection with the employment alone shall be taken to be the

course of his employment.

2. A person who is busy in performing his duty, under the terms of his

employment, at any place, shall be taken to be working in the course

of employment.



356


3. Break for rest, refreshment, etc., within the premises of the employer

is regarded as incidental to work and the worker is supposed to be in

the course of his employment even for that period.

4. When the workman uses transport provided by the employer for the

purpose of going to and from the place of work, he is deemed to be in

the course of employment during the time when he uses the transport.

[Holmes Vs Great Northern Railway (1900) 2 Q.B.409].

OCCUPATIONAL DISEASE

Sub-section (2) declares that the contracting of an occupational disease by a

workman shall be deemed to be an injury by accident within the meaning of

Section 3, and unless the contrary is proved, the accidents shall be deemed to

have arisen out of, and in the course of employment.

EMPLOYER NOT LIABLE

Section 3(1) of the Act has mentioned the following circumstances in which the

employer is not liable to pay compensation to a workman for personal injury

caused by accident: They are

1. In respect of any injury which does not result in the total or partial

disablement of the workman for a period exceeding three days;

2. In respect of any injury, not resulting in death, cause by an accident

which is directly attributable to

(i)

The workman having been at the time of the accident,

under the influence or drink or drugs.

(ii)

The willful disobedience of the workman to an order

expressly given, or to a rule expressly framed, for the

purpose of securing the safety of workman; or



357



(iii)

The willful removal or disregard by the workman of any

safety guard or other device, which he knew to have been

provided for the purpose of securing the safety of

workman.

3. According to sub-section (4) of Section 3, if the occupational disease

is not directly attributable to a specific injury by accident arising out

of and in the course of his employment.



4. According to sub-section (5), if the injured workman has instituted a

suit in a civil court for damages in respect of the injury, against the

employer or any other person, and

5. If the accident causing injury or death did not arise out of and in the

course of the workman's employment.

AMOUNT OF COMPENSATION



The amount of compensation payable to a workman depends on

(i) The nature of the injury caused by accident;

(ii) The monthly wages of the workman concerned; and

(iii) The relevant factor for working out lump-sum equivalent of

compensation amount as specified in Schedule IV (as substituted

by the Amendment Act of 1984).

There is no distinction between an adult and a minor worker with

respect to the amount of compensation.

Now Section 4 (as substituted by the Amendment Act of 1984) provides

for compensation for

?

Death;

?

Permanent total disablement;



358


?

Permanent partial disablement;

?

Temporary disablement, whether total or partial.

PROCEDURE FOR CLAIMING COMPENSATION

An injured workman may either file a civil suit for damages against the

employer or claim compensation under the Workmen's Compensation Act,

1923. He has to make a choice between these two reliefs.



Section 3(5) of the Act provides that no claim for compensation can be

made under the Act if the workman has filed a civil suit. It further provides that

a workman cannot file a suit for damages in any court of law if

(i)

He has filed a claim under the Workmen's Compensation Act,
1923; or

(ii)

There is an agreement between the workmen and his employer
providing for the payment of compensation according to the
provisions of the Workmen's Compensation Act, 1923.


In a civil suit for damages, the employer can put forward all the defences

available to him under the law of torts. Moreover, a civil suit is a risky and

costly affair. A claim under the Workmen's Compensation Act, 1923 is safe

and less costly.

APPEAL (Sec.30)

Under Section 30 of the Act, an appeal lies to the High Court from following

orders of the Commissioner:

(a) An order awarding as compensation, a lump sum whether by way of

redemption of a half-monthly payment or otherwise or disallowing a

claim in full or in part for a lump-sum.

(b) An order awarding interest or penalty;

(c) An order refusing to allow redemption of half-monthly payment;



359



(d) An order providing for the distribution of compensation among the

dependants of a deceased workman, or disallowing any claim of a

person alleging himself to be such dependent;

(e) An order allowing or disallowing any claim for the amount of an

indemnity under the provisions of Section 12 (2);

(f) An order refusing to register a memorandum of agreement of

registering the same or providing for the registration of the same

subject to conditions.

According to the first proviso to this section, no appeal lies against any

order unless a substantial question of law is involved, and in the case of an order

other than an order refusing to allow redemption of a half-monthly payment, the

amount in dispute is not less than three hundred rupees.

An appeal will not also lie, if the parties have agreed to abide by the

decision of the Commissioner, or in which the order of the Commissioner gives

effect to an agreement between the parties.

No appeal by an employer under clause (a) above shall lie, unless the

memorandum of appeal is accompanied by a certificate by the Commissioner to

the effect that the appellant has deposited with him the amount payable under

the order appealed against.

The period of limitation for an appeal is 60 days, and the provisions of

Section 5 of the Indian Limitation Act, 1908, will also apply to appeal under this

section.

AMENDED PROVISIONS IN THE ACT

The minimum amount of compensation payable under the Workmen's

Compensation Act yet has been enhanced from 50,000 to 80,000 in case of

death and from 60,000 to 90,000 in case of permanent total disablement with



360


effect from 08/12/2000. From the same date the ceiling of the Maximum

amount of compensation has been doubled from Rs. 2.28 lakh to 4.56 lakh in

case of death and from Rs. 2.74 lakh to 5.48 lakh in case of permanent total

disablement.

The 39th session of Indian Labour conference was held on 16-18 October

2003 and deliberated various issues like child labour, bonded labour, women

labour, etc.

SUMMARY

India's first social security legislation was passed in 1923. The Workmen's

Compensation Act was to provide injury compensation to industrial workers.

The Act imposes obligation on the employer to pay compensation for accidents

arising out of and in course of employment. The Act was amended in 1962

raising the wage limit to Rs.400 per month, and the 1976 amendment raised the

wage limit to Rs.1, 000 per month, and a later amendment raised it to Rs.1, 600

per month.



The Compensation limits incase of death was raised from Rs.10,000 to

30,000 and for permanent and total disablement from Rs.14,000 to 40,000 by the

same amendment. The term "workmen" in the Act refers to those employed in

factories, mines, plantations, construction work and other hazards occupations,

except those covered by Employee State Insurance Act, 1948, and clerical

employees.



The Compensation is related to the extent of the injury or circumstances

of death. However, the employee cannot claim any compensation if he sustains

injuries under the influence of drugs, alcohol, etc. The Act provides for half-

monthly payment for temporary disablement. The compensation cannot exceed

half the monthly wages. A Commissioner appointed by the Government



361



administers the Act. The employer is required to file annual return giving

details of the compensation paid, number of injuries and other particulars.



If the workman contacts any occupational disease due to the employment

in that particular job, it would be deemed to be an injury by accident arising out

of and in the course of his employment for purposes of the Act. In this case, the

compensation will be payable only if the workman has been in service of the

employer for more than six months.

If the employer does not pay the compensation within one month from

then date it fell due, the Commissioner may order recovery of not only the

amount of arrears but also a simple interest at the rate of six per cent per annum

on the amount due. If there is no justification for the delay in the opinion of the

Commissioner, an additional sum not exceeding 50 per cent of such amount may

be recovered from the employer by way of penalty.

5.4.1. Activity

The employer did not pay the compensation within six months from the date it

fell due. List out the remedies available treating you as an employee of that firm

against the management.













5.4.2. Activity

Mention the rights and privileges of the Commissioner against the erring

management with regard to the payment of compensation relating to

occupational diseases



362














SELF-ASSESSMENT QUESTIONS

1.

Workmen's Compensation Act is a boon offering social justices to
workmen by speedy remedy without much cause and expense for their
claims-Discuss.


2.

Who are dependants and who can they claim compensation under the
act?


3.

Workmen's Compensation Act states the loss of earning capacity is not
necessarily co-extensive with the loss of physical capacity. Explain.

4.

Accident arising out of employment is deemed to have occurred in the
course of employment, - Discuss.

5.

State the three classified types of occupational diseases with
illustrations.

6.

State the methods and manner by which compensation under the Act is
settled in the case of

(i)

Death

(ii)

Permanent total disablement

(iii)

Temporary total and partial disablement

(iv)

Temporary total and partial disablement

7.

State the procedure prescribed under the Act for claiming and
disbursing compensation under the Workmen's compensations Act.

8.

State the remedies provided under the Act to claim when the amounts
settled are not acceptable to them. Is there has been right of appeal for
any aggrieved parties?



363



9.

State the powers of the commissioner in the matter settling the claims
of the employees under the Workmen's Compensation Act.



KEY WORDS

o Social Welfare Activities: Activities which will improve the living

conditions of people (especially of manual workers)

o Social Security Measures: measures that will ensure protection by

society to its members against economic and social distress.

o Intra-mural: within the boundaries of the establishment (factory/

organisation)

o Extra-mural: Outside the establishment
o Statutory: required under law
o Indian Labour Conference: An apex body at the national level

consisting of representatives of employees, employers and the
government to discuss and recommend decisions relating to labour.



FURTHER READINGS

? Sarma, A.M. 1981 Aspects of Labour Welfare and Social Security,

Himalaya Publishing House: Bombay.

? Thakur, C.P. 1985. Corporate Strategy on Fringe Benefits. Spectrum

Publishing House: Delhi.

? Agarwal. S.L. 1980 Labour Regulations Law in India (Revised Edition),

Macmillan Company of India Ltd: Delhi



364

This post was last modified on 14 March 2022