--- Content provided by FirstRanker.com ---Time: 3 Hours] [Max. Marks: 100
Note Answer all questions from Part A. Answer any five
questions from Part B.
PART- A (35 Marks)
1. Write where the following lines are used in graphics : 2
b) Continuous zigzag line
c) Dash-Dot lines
d) Thin Dash lines.
2. A vehicle is travelling at a speed of 50 km per hour. On a scale representing one
3
1
/
2
3. Draw a parabola passing through all the vertices of an isosceles triangles of sides
45 mm, 60 mm and 60 mm. Use tangent method. 2
4. Two points A and B are in the HP. The point A is 25 mm in front of the VP while
B is behind the VP. The distance between their projectors is 70 mm and the line
point B from the VP. 3
5. A straight line is parallel to both VP and HP. Its one end is 25 mm behind VP and
15 mm above HP. Length of the line is 10 cm. Draw itsfrprojection. 4
6. A regular pentagon ABCDE, 25 cm side, has its corner A in HP and the side CD
away from VP. Also draw its traces. 4
7. Draw the projections of a cube of side 40 mm. One of the solid diagonals of the
cube makes :
I) 90? to VP and ii) 30? to VP. 4
HP with one of its base edges perpendicular to VP. An auxiliary inclined plane,
inclined to HP at 40? cuts the pyramid, bisecting its axis. Draw its front view and
true shape of the section.
(This paper contains 2 pages) 1 P.T.O.
FirstRanker.com - FirstRanker's Choice
11111111111111111111 111111111 Code No. 5008/N
FACULTY OF ENGINEERING AND INFORMATICS
Examination, January 2012
ENGINEERING GRAPHICS
Time: 3 Hours] [Max. Marks: 100
Note Answer all questions from Part A. Answer any five
PART- A (35 Marks)
1. Write where the following lines are used in graphics : 2
a) Continuous thick line
b) Continuous zigzag line
d) Thin Dash lines.
2. A vehicle is travelling at a speed of 50 km per hour. On a scale representing one
third of a kilometer by a cm, show the distance travelled by the vehicle in
3
/
2
minutes. Find the R.F. of the scale.
3. Draw a parabola passing through all the vertices of an isosceles triangles of sides
4. Two points A and B are in the HP. The point A is 25 mm in front of the VP while
B is behind the VP. The distance between their projectors is 70 mm and the line
joining their top views makes an angle of 45? with xy, Find the distance of the
point B from the VP. 3
15 mm above HP. Length of the line is 10 cm. Draw itsfrprojection. 4
6. A regular pentagon ABCDE, 25 cm side, has its corner A in HP and the side CD
parallel to the HP. Draw its projections when its plan is parallel to and 10 mm
away from VP. Also draw its traces. 4
cube makes :
I) 90? to VP and ii) 30? to VP. 4
8. A pentagonal pyramid, side of base 25 mm and height 50 mm rests on its base on
HP with one of its base edges perpendicular to VP. An auxiliary inclined plane,
true shape of the section.
4
(This paper contains 2 pages) 1 P.T.O.
9. A right regular pentagonal prism, edge of base 25 mm and height 70 mm resting
on its base on HP, is cut by a section plane inclined to HP at 40? and meeting the
axis at a distance of 20. mm from its top end. Develop the outside surface of the
cut prism. 4
and 20 mm height. Draw the isometric drawing of the solids. 4
PART? B (65 Marks)
11. Draw a branch of hyperbola when the distance of its focus from the directrix is
50 mm and its eccentricity is 3/2. Also, draw a tangent and a normal to the curve
12. A line AB is 70 mm long. It is inclined at 45? to HP. Its front view at' measures 50
mm. The end A is 15 mm above HP and 20 mm in front of VP. The end B is in the
first quadrant. Draw the Projections of the line. Determine its traces and its
inclination to VP. 13
front and top views of the plate when its plane is vertical and inclined at 35? to VP.
Given the Corner nearest to HP is 18 mm from both the HP and VP and a side
containing the corner making an angle of 45? to the HP. 13
14. A right regular pentagonal prism, side of base 30 mm and height 70 mm rests on
inclined to the HP at 55? and the side of base, opposite to the corner, inclined at
30? to the VP. Draw its projections keeping the vertex towards the VP. 13
15. A right regular pentagonal pyramid, edge of base 30 mm and 65 mm height, is
lying on one of its triangular faces on ground plane such that its axis is parallel to
pyramid meeting its axis at a distance of 30 mm from the vertex. Draw its
sectional top view and true shape of the section. 13
16. A right circular cylinder, base 55 mm dia and 100 mm height, resting on its base in
HP, is intersected by another cylinder of dia 40 mm base. The axis of the
axis of the vertical cylinder at a distance of 20 mm in front of its base (i.e. from its
base). Draw the projections of the two cylinders showing the curves of
intersection, Assume any suitable length of penetrating cylinder. 13
17. a) The distance between station A and B is 200 km. A vehicle covers this distance
R.F. of the scale is 1/200000. Indicate on this scale the distance covered by
the vehicle in 36 minutes. 8
b) Draw the involute of a line of 15 mm for 5 turns. 5
2
FirstRanker.com - FirstRanker's Choice
Note Answer all questions from Part A. Answer any five
questions from Part B.
PART- A (35 Marks)
1. Write where the following lines are used in graphics : 2
--- Content provided by FirstRanker.com ---
a) Continuous thick lineb) Continuous zigzag line
c) Dash-Dot lines
d) Thin Dash lines.
2. A vehicle is travelling at a speed of 50 km per hour. On a scale representing one
--- Content provided by FirstRanker.com ---
third of a kilometer by a cm, show the distance travelled by the vehicle in3
1
/
2
--- Content provided by FirstRanker.com ---
minutes. Find the R.F. of the scale.3. Draw a parabola passing through all the vertices of an isosceles triangles of sides
45 mm, 60 mm and 60 mm. Use tangent method. 2
4. Two points A and B are in the HP. The point A is 25 mm in front of the VP while
B is behind the VP. The distance between their projectors is 70 mm and the line
--- Content provided by FirstRanker.com ---
joining their top views makes an angle of 45? with xy, Find the distance of thepoint B from the VP. 3
5. A straight line is parallel to both VP and HP. Its one end is 25 mm behind VP and
15 mm above HP. Length of the line is 10 cm. Draw itsfrprojection. 4
6. A regular pentagon ABCDE, 25 cm side, has its corner A in HP and the side CD
--- Content provided by FirstRanker.com ---
parallel to the HP. Draw its projections when its plan is parallel to and 10 mmaway from VP. Also draw its traces. 4
7. Draw the projections of a cube of side 40 mm. One of the solid diagonals of the
cube makes :
I) 90? to VP and ii) 30? to VP. 4
--- Content provided by FirstRanker.com ---
8. A pentagonal pyramid, side of base 25 mm and height 50 mm rests on its base onHP with one of its base edges perpendicular to VP. An auxiliary inclined plane,
inclined to HP at 40? cuts the pyramid, bisecting its axis. Draw its front view and
true shape of the section.
--- Content provided by FirstRanker.com ---
4(This paper contains 2 pages) 1 P.T.O.
FirstRanker.com - FirstRanker's Choice
11111111111111111111 111111111 Code No. 5008/N
FACULTY OF ENGINEERING AND INFORMATICS
--- Content provided by FirstRanker.com ---
B.E. 1 Year (New) (Common to All Branches) (Supp;I.)Examination, January 2012
ENGINEERING GRAPHICS
Time: 3 Hours] [Max. Marks: 100
Note Answer all questions from Part A. Answer any five
--- Content provided by FirstRanker.com ---
questions from Part B.PART- A (35 Marks)
1. Write where the following lines are used in graphics : 2
a) Continuous thick line
b) Continuous zigzag line
--- Content provided by FirstRanker.com ---
c) Dash-Dot linesd) Thin Dash lines.
2. A vehicle is travelling at a speed of 50 km per hour. On a scale representing one
third of a kilometer by a cm, show the distance travelled by the vehicle in
3
--- Content provided by FirstRanker.com ---
1/
2
minutes. Find the R.F. of the scale.
3. Draw a parabola passing through all the vertices of an isosceles triangles of sides
--- Content provided by FirstRanker.com ---
45 mm, 60 mm and 60 mm. Use tangent method. 24. Two points A and B are in the HP. The point A is 25 mm in front of the VP while
B is behind the VP. The distance between their projectors is 70 mm and the line
joining their top views makes an angle of 45? with xy, Find the distance of the
point B from the VP. 3
--- Content provided by FirstRanker.com ---
5. A straight line is parallel to both VP and HP. Its one end is 25 mm behind VP and15 mm above HP. Length of the line is 10 cm. Draw itsfrprojection. 4
6. A regular pentagon ABCDE, 25 cm side, has its corner A in HP and the side CD
parallel to the HP. Draw its projections when its plan is parallel to and 10 mm
away from VP. Also draw its traces. 4
--- Content provided by FirstRanker.com ---
7. Draw the projections of a cube of side 40 mm. One of the solid diagonals of thecube makes :
I) 90? to VP and ii) 30? to VP. 4
8. A pentagonal pyramid, side of base 25 mm and height 50 mm rests on its base on
HP with one of its base edges perpendicular to VP. An auxiliary inclined plane,
--- Content provided by FirstRanker.com ---
inclined to HP at 40? cuts the pyramid, bisecting its axis. Draw its front view andtrue shape of the section.
4
(This paper contains 2 pages) 1 P.T.O.
--- Content provided by FirstRanker.com ---
IMIEN11101111111iii Code No 5008/N9. A right regular pentagonal prism, edge of base 25 mm and height 70 mm resting
on its base on HP, is cut by a section plane inclined to HP at 40? and meeting the
axis at a distance of 20. mm from its top end. Develop the outside surface of the
cut prism. 4
--- Content provided by FirstRanker.com ---
10. A cube of 25 mm edge is placed centrally on top of a cylindrical block of dia 50 mmand 20 mm height. Draw the isometric drawing of the solids. 4
PART? B (65 Marks)
11. Draw a branch of hyperbola when the distance of its focus from the directrix is
50 mm and its eccentricity is 3/2. Also, draw a tangent and a normal to the curve
--- Content provided by FirstRanker.com ---
at a point P on it. 1312. A line AB is 70 mm long. It is inclined at 45? to HP. Its front view at' measures 50
mm. The end A is 15 mm above HP and 20 mm in front of VP. The end B is in the
first quadrant. Draw the Projections of the line. Determine its traces and its
inclination to VP. 13
--- Content provided by FirstRanker.com ---
13. An equilateral triangular plate is of 50 mm side with negligible thickness. Draw thefront and top views of the plate when its plane is vertical and inclined at 35? to VP.
Given the Corner nearest to HP is 18 mm from both the HP and VP and a side
containing the corner making an angle of 45? to the HP. 13
14. A right regular pentagonal prism, side of base 30 mm and height 70 mm rests on
--- Content provided by FirstRanker.com ---
one of its base corners on HP such that its long edge containing the corner isinclined to the HP at 55? and the side of base, opposite to the corner, inclined at
30? to the VP. Draw its projections keeping the vertex towards the VP. 13
15. A right regular pentagonal pyramid, edge of base 30 mm and 65 mm height, is
lying on one of its triangular faces on ground plane such that its axis is parallel to
--- Content provided by FirstRanker.com ---
VP. A Section plane perpendicular to the VP and inclined to the HP at 60? cuts thepyramid meeting its axis at a distance of 30 mm from the vertex. Draw its
sectional top view and true shape of the section. 13
16. A right circular cylinder, base 55 mm dia and 100 mm height, resting on its base in
HP, is intersected by another cylinder of dia 40 mm base. The axis of the
--- Content provided by FirstRanker.com ---
penetrating cylinder is inclined to HP at 40?, is parallel to VP and intersect theaxis of the vertical cylinder at a distance of 20 mm in front of its base (i.e. from its
base). Draw the projections of the two cylinders showing the curves of
intersection, Assume any suitable length of penetrating cylinder. 13
17. a) The distance between station A and B is 200 km. A vehicle covers this distance
--- Content provided by FirstRanker.com ---
in 5 hours. Construct a plain scale to measure time upto a single minute. TheR.F. of the scale is 1/200000. Indicate on this scale the distance covered by
the vehicle in 36 minutes. 8
b) Draw the involute of a line of 15 mm for 5 turns. 5
2
--- Content provided by FirstRanker.com ---
2,000FirstRanker.com - FirstRanker's Choice