Download AKTU B-Tech 4th Sem 2015-16 NEC 403 Electronic Measurements Instrumentation Question Paper

NEC-403

www.FirstRanker.com

Pages 14

--- Content provided by FirstRanker.com ---

(Following Paper ID and Roll No. to be filled in your Answer Books)

Paper ID : 131417

Roll No.

B.TECH.

Theory Examination (Semester-IV) 2015-16

--- Content provided by FirstRanker.com ---

ELECTRONIC MEASUREMENTS & INSTRUMENTATION

Time : 3 Hours

Max. Marks : 100

Section-A

Q1. Attempt all parts. All carry equal marks. Write answer of each part in short. (2×10=20)

--- Content provided by⁠ FirstRanker.com ---

1. Define random error and Gross error with suitable example.
2. Define accuracy and precision with suitable example.
3. What do you mean by Dissipation factor? Explain.
4. What is Quality factor and its importance in measurement.
5. How Emitter-Follower structure reduces Voltmeter loading effect?

--- Content provided by FirstRanker.com ---

Section-B

Q2. Attempt any five questions from this section. (10×5=50)

1. Define systematic errors in details. A batch of resistors each has a nominal resistance of 330 O are to be tested and classified as ±5% and ±10% components are specified at 25°C, and their temperature coefficient is -300 ppm/°C. Calculate the maximum and minimum resistance for these components at 100°C and Calculate the maximum and minimum absolute resistance for each case.
2. Explain construction and working of X-Y recorder.
3. Write short note on DSO. Compare it with Sampling Oscilloscope.

--- Content provided by⁠ FirstRanker.com ---

4. Explain the construction and working of Q-meter.
5. How dielectric loss and unknown capacitance are measured by Schering Bridge?

Section-C

Note: Attempt any two questions from this section. (15×2=30)

Q3. Explain the following in detail with their diagram:

--- Content provided by FirstRanker.com ---

1. Attenuator Probe
2. 1:1 Probe

Q4. Explain construction of PMMC instrument with FSO 100 µA and a coil resistance of 2kO is to be converted into a voltmeter. Determine the required multiplier resistance if the voltmeter is to measure 35V at full scale. Also calculate the applied voltage when the instrument indicates 0.8, 0.5, and 0.2 of FSD with neat circuit diagram.

Q5. Explain the working procedure of following:

1. Plotter

--- Content provided by‌ FirstRanker.com ---

2. Sampling Oscilloscope

www.FirstRanker.com