Time: 3 hours Max. Marks: 75
Answer any FIVE Questions
All Questions carry Equal Marks
--- Content provided by FirstRanker.com ---
~~~~~~~~~~~~~~~~~~~~~~~~~1. a) Explain the instruction set architecture of 8085.
b) What addressing mode is used by the following instructions for the relatively simple CPU?
--- Content provided by FirstRanker.com ---
i) MVAC ii) CLAC iii) JMPZ ? (8M+7M)2. a) Explain and draw neat timing diagrams for Memory Read and Memory Write operations.
b) Design an interface for an input device which binary address 10101010.Its computer system
uses isolated I/O. (7M+8M)
--- Content provided by FirstRanker.com ---
3. a) Explain briefly about the shift micro operation.
b) Write the RTL statements for the following transitions. All registers are 1-bit wide.
i) IF ? = 1 THEN copy X to W and copy Z to Y
ii) IF ? = 0 THEN copy X to W (8M+7M)
--- Content provided by FirstRanker.com ---
4. a) Distinguish between Hardwired control unit and Micro programmed Control unit.
b) Draw and explain briefly about Fetch and Decode cycles for the Simple CPU. (5M+10M)
--- Content provided by FirstRanker.com ---
5. Design the RTL code for the shift-add multiplication UV<--X.Y for X=9 and Y=14. (15M)6. a) Distinguish between Logical address and Physical address with an example.
b) A computer system using the relatively simple CPU is to include a 1k associative cache with
a line size of 2 bytes.
--- Content provided by FirstRanker.com ---
i) How many bits are in each location of the cache?ii) What mask value is needed for the associative memory? (7M+8M)
7. a) Distinguish between Synchronous data transfer and Asynchronous data transfer.
b) What is an Interrupt? Explain about different types of Interrupts. (5M+10M)
--- Content provided by FirstRanker.com ---
8. a) Explain the formats used by the 32-bit SPARC CPU.
b) Explain Flynn's Classification of parallel computers. (7M+8M)
--- Content provided by FirstRanker.com ---
1 of 1
--- Content provided by FirstRanker.com ---
SET - 1R10
FirstRanker.com - FirstRanker's Choice
--- Content provided by FirstRanker.com ---
|''|''|||''|'''|||'|Code No: R22054
II B. Tech II Semester Regular Examinations August - 2014
COMPUTER ORGANIZATION
--- Content provided by FirstRanker.com ---
(Com. to CSE, ECC)Time: 3 hours Max. Marks: 75
Answer any FIVE Questions
All Questions carry Equal Marks
--- Content provided by FirstRanker.com ---
~~~~~~~~~~~~~~~~~~~~~~~~~1. a) Explain the instruction set architecture of 8085.
b) What addressing mode is used by the following instructions for the relatively simple CPU?
--- Content provided by FirstRanker.com ---
i) MVAC ii) CLAC iii) JMPZ ? (8M+7M)2. a) Explain and draw neat timing diagrams for Memory Read and Memory Write operations.
b) Design an interface for an input device which binary address 10101010.Its computer system
uses isolated I/O. (7M+8M)
--- Content provided by FirstRanker.com ---
3. a) Explain briefly about the shift micro operation.
b) Write the RTL statements for the following transitions. All registers are 1-bit wide.
i) IF ? = 1 THEN copy X to W and copy Z to Y
ii) IF ? = 0 THEN copy X to W (8M+7M)
--- Content provided by FirstRanker.com ---
4. a) Distinguish between Hardwired control unit and Micro programmed Control unit.
b) Draw and explain briefly about Fetch and Decode cycles for the Simple CPU. (5M+10M)
--- Content provided by FirstRanker.com ---
5. Design the RTL code for the shift-add multiplication UV<--X.Y for X=9 and Y=14. (15M)6. a) Distinguish between Logical address and Physical address with an example.
b) A computer system using the relatively simple CPU is to include a 1k associative cache with
a line size of 2 bytes.
--- Content provided by FirstRanker.com ---
i) How many bits are in each location of the cache?ii) What mask value is needed for the associative memory? (7M+8M)
7. a) Distinguish between Synchronous data transfer and Asynchronous data transfer.
b) What is an Interrupt? Explain about different types of Interrupts. (5M+10M)
--- Content provided by FirstRanker.com ---
8. a) Explain the formats used by the 32-bit SPARC CPU.
b) Explain Flynn's Classification of parallel computers. (7M+8M)
--- Content provided by FirstRanker.com ---
1 of 1
--- Content provided by FirstRanker.com ---
SET - 1R10
|''|''|||''|'''|||'|
--- Content provided by FirstRanker.com ---
Code No: R22054II B. Tech II Semester Regular Examinations August - 2014
COMPUTER ORGANIZATION
(Com. to CSE, ECC)
--- Content provided by FirstRanker.com ---
Time: 3 hours Max. Marks: 75Answer any FIVE Questions
All Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~~
--- Content provided by FirstRanker.com ---
1. a) Explain about various addressing modes in Assembly Language Instructions.
b) Write the instruction code formats for Assembly language programs and Machine code to
calculate A=B+C for two-operand and zero-operand instructions (8M+7M)
--- Content provided by FirstRanker.com ---
2. a) Explain about the different types of Memory Chips.
b) Construct a 16 X 2 memory subsystem constructed from two 8 X 2 ROM chips with high-
order interleaving. (7M+8M)
--- Content provided by FirstRanker.com ---
3. Explain VHDL file to implement modulo 6 counter using high level of abstraction. (15M)4. a) Explain the generic Micro instruction Formats.
b) Explain Micro Sequencer for the relatively simple CPU with micro subroutines. (5M+10M)
--- Content provided by FirstRanker.com ---
5. a) Construct a 3 ? 3 multiplexer using a Carry-Save Adder.b) Explain about overflow generation in unsigned two's complement Addition. (8M+7M)
6. a) Differentiate Cache memory Vs Virtual memory.
b) Explain about External fragmentation in physical memory caused by Segmentation.
--- Content provided by FirstRanker.com ---
(8M+7M)7. a) Explain the concept of Handshaking technique.
b) Explain I/O Processor with a neat diagram. (5M+10M)
--- Content provided by FirstRanker.com ---
8. Explain Instruction Pipelines and its conflicts with Examples. (15M)--- Content provided by FirstRanker.com ---
1 of 1
--- Content provided by FirstRanker.com ---
SET - 2
R10
--- Content provided by FirstRanker.com ---
FirstRanker.com - FirstRanker's Choice
|''|''|||''|'''|||'|
Code No: R22054
--- Content provided by FirstRanker.com ---
II B. Tech II Semester Regular Examinations August - 2014
COMPUTER ORGANIZATION
(Com. to CSE, ECC)
Time: 3 hours Max. Marks: 75
--- Content provided by FirstRanker.com ---
Answer any FIVE Questions
All Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~~
--- Content provided by FirstRanker.com ---
1. a) Explain the instruction set architecture of 8085.
b) What addressing mode is used by the following instructions for the relatively simple CPU?
i) MVAC ii) CLAC iii) JMPZ ? (8M+7M)
--- Content provided by FirstRanker.com ---
2. a) Explain and draw neat timing diagrams for Memory Read and Memory Write operations.b) Design an interface for an input device which binary address 10101010.Its computer system
uses isolated I/O. (7M+8M)
3. a) Explain briefly about the shift micro operation.
--- Content provided by FirstRanker.com ---
b) Write the RTL statements for the following transitions. All registers are 1-bit wide.i) IF ? = 1 THEN copy X to W and copy Z to Y
ii) IF ? = 0 THEN copy X to W (8M+7M)
4. a) Distinguish between Hardwired control unit and Micro programmed Control unit.
--- Content provided by FirstRanker.com ---
b) Draw and explain briefly about Fetch and Decode cycles for the Simple CPU. (5M+10M)5. Design the RTL code for the shift-add multiplication UV<--X.Y for X=9 and Y=14. (15M)
--- Content provided by FirstRanker.com ---
6. a) Distinguish between Logical address and Physical address with an example.b) A computer system using the relatively simple CPU is to include a 1k associative cache with
a line size of 2 bytes.
i) How many bits are in each location of the cache?
ii) What mask value is needed for the associative memory? (7M+8M)
--- Content provided by FirstRanker.com ---
7. a) Distinguish between Synchronous data transfer and Asynchronous data transfer.
b) What is an Interrupt? Explain about different types of Interrupts. (5M+10M)
8. a) Explain the formats used by the 32-bit SPARC CPU.
--- Content provided by FirstRanker.com ---
b) Explain Flynn's Classification of parallel computers. (7M+8M)1 of 1
--- Content provided by FirstRanker.com ---
SET - 1
R10
--- Content provided by FirstRanker.com ---
|''|''|||''|'''|||'|
Code No: R22054
--- Content provided by FirstRanker.com ---
II B. Tech II Semester Regular Examinations August - 2014COMPUTER ORGANIZATION
(Com. to CSE, ECC)
Time: 3 hours Max. Marks: 75
--- Content provided by FirstRanker.com ---
Answer any FIVE QuestionsAll Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~~
--- Content provided by FirstRanker.com ---
1. a) Explain about various addressing modes in Assembly Language Instructions.b) Write the instruction code formats for Assembly language programs and Machine code to
calculate A=B+C for two-operand and zero-operand instructions (8M+7M)
2. a) Explain about the different types of Memory Chips.
--- Content provided by FirstRanker.com ---
b) Construct a 16 X 2 memory subsystem constructed from two 8 X 2 ROM chips with high-order interleaving. (7M+8M)
3. Explain VHDL file to implement modulo 6 counter using high level of abstraction. (15M)
--- Content provided by FirstRanker.com ---
4. a) Explain the generic Micro instruction Formats.b) Explain Micro Sequencer for the relatively simple CPU with micro subroutines. (5M+10M)
5. a) Construct a 3 ? 3 multiplexer using a Carry-Save Adder.
b) Explain about overflow generation in unsigned two's complement Addition. (8M+7M)
--- Content provided by FirstRanker.com ---
6. a) Differentiate Cache memory Vs Virtual memory.
b) Explain about External fragmentation in physical memory caused by Segmentation.
(8M+7M)
--- Content provided by FirstRanker.com ---
7. a) Explain the concept of Handshaking technique.b) Explain I/O Processor with a neat diagram. (5M+10M)
8. Explain Instruction Pipelines and its conflicts with Examples. (15M)
--- Content provided by FirstRanker.com ---
1 of 1
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
SET - 2
R10
--- Content provided by FirstRanker.com ---
|''|''|||''|'''|||'|Code No: R22054
II B. Tech II Semester Regular Examinations August - 2014
COMPUTER ORGANIZATION
--- Content provided by FirstRanker.com ---
(Com. to CSE, ECC)Time: 3 hours Max. Marks: 75
Answer any FIVE Questions
All Questions carry Equal Marks
--- Content provided by FirstRanker.com ---
~~~~~~~~~~~~~~~~~~~~~~~~~1. a) Explain about Data transfer instructions in Assembly Language Instructions.
b) What addressing mode is used by the following instructions for the 8085 micro processor?
--- Content provided by FirstRanker.com ---
i) SPHL ii) CMC iii) JUMP ? (8M+7M)2. a) Distinguish between SRAM and DRAM.
b) Explain the CPU internal Organization. (7M+8M)
--- Content provided by FirstRanker.com ---
3. a) Draw the State diagram for modulo 6 counter.b) What is a hardware description language? Explain the features of VHDL. (10M+5M)
4. Draw and explain the Generic Hardwired Control unit. (15M)
--- Content provided by FirstRanker.com ---
5. a) Show the Wallace tree to perform 6 ? 6 Multiplication.b) What is the result of the following operations on unsigned non-negative numbers using 1?s
complement.
i) 1011 0100 ? 0111 0111
ii) 1000 1011 + 0111 0100
--- Content provided by FirstRanker.com ---
iii) 10101.101+11011.001 (8M+7M)6. a) Explain about Locality of Reference.
b) Explain cache memory with Direct Mapping technique. (5M+10M)
--- Content provided by FirstRanker.com ---
7. a) Explain about Daisy Chaining.b) Explain incorporating Direct Memory Access into a computer system. (5M+10M)
8. a) Compare RISC and CISC processors.
b) Explain Multiprocessor system inter connection N/w topologies. (7M+8M)
--- Content provided by FirstRanker.com ---
1 of 1
--- Content provided by FirstRanker.com ---
SET - 3
R10
--- Content provided by FirstRanker.com ---
FirstRanker.com - FirstRanker's Choice
|''|''|||''|'''|||'|
Code No: R22054
--- Content provided by FirstRanker.com ---
II B. Tech II Semester Regular Examinations August - 2014
COMPUTER ORGANIZATION
(Com. to CSE, ECC)
Time: 3 hours Max. Marks: 75
--- Content provided by FirstRanker.com ---
Answer any FIVE Questions
All Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~~
--- Content provided by FirstRanker.com ---
1. a) Explain the instruction set architecture of 8085.
b) What addressing mode is used by the following instructions for the relatively simple CPU?
i) MVAC ii) CLAC iii) JMPZ ? (8M+7M)
--- Content provided by FirstRanker.com ---
2. a) Explain and draw neat timing diagrams for Memory Read and Memory Write operations.b) Design an interface for an input device which binary address 10101010.Its computer system
uses isolated I/O. (7M+8M)
3. a) Explain briefly about the shift micro operation.
--- Content provided by FirstRanker.com ---
b) Write the RTL statements for the following transitions. All registers are 1-bit wide.i) IF ? = 1 THEN copy X to W and copy Z to Y
ii) IF ? = 0 THEN copy X to W (8M+7M)
4. a) Distinguish between Hardwired control unit and Micro programmed Control unit.
--- Content provided by FirstRanker.com ---
b) Draw and explain briefly about Fetch and Decode cycles for the Simple CPU. (5M+10M)5. Design the RTL code for the shift-add multiplication UV<--X.Y for X=9 and Y=14. (15M)
--- Content provided by FirstRanker.com ---
6. a) Distinguish between Logical address and Physical address with an example.b) A computer system using the relatively simple CPU is to include a 1k associative cache with
a line size of 2 bytes.
i) How many bits are in each location of the cache?
ii) What mask value is needed for the associative memory? (7M+8M)
--- Content provided by FirstRanker.com ---
7. a) Distinguish between Synchronous data transfer and Asynchronous data transfer.
b) What is an Interrupt? Explain about different types of Interrupts. (5M+10M)
8. a) Explain the formats used by the 32-bit SPARC CPU.
--- Content provided by FirstRanker.com ---
b) Explain Flynn's Classification of parallel computers. (7M+8M)1 of 1
--- Content provided by FirstRanker.com ---
SET - 1
R10
--- Content provided by FirstRanker.com ---
|''|''|||''|'''|||'|
Code No: R22054
--- Content provided by FirstRanker.com ---
II B. Tech II Semester Regular Examinations August - 2014COMPUTER ORGANIZATION
(Com. to CSE, ECC)
Time: 3 hours Max. Marks: 75
--- Content provided by FirstRanker.com ---
Answer any FIVE QuestionsAll Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~~
--- Content provided by FirstRanker.com ---
1. a) Explain about various addressing modes in Assembly Language Instructions.b) Write the instruction code formats for Assembly language programs and Machine code to
calculate A=B+C for two-operand and zero-operand instructions (8M+7M)
2. a) Explain about the different types of Memory Chips.
--- Content provided by FirstRanker.com ---
b) Construct a 16 X 2 memory subsystem constructed from two 8 X 2 ROM chips with high-order interleaving. (7M+8M)
3. Explain VHDL file to implement modulo 6 counter using high level of abstraction. (15M)
--- Content provided by FirstRanker.com ---
4. a) Explain the generic Micro instruction Formats.b) Explain Micro Sequencer for the relatively simple CPU with micro subroutines. (5M+10M)
5. a) Construct a 3 ? 3 multiplexer using a Carry-Save Adder.
b) Explain about overflow generation in unsigned two's complement Addition. (8M+7M)
--- Content provided by FirstRanker.com ---
6. a) Differentiate Cache memory Vs Virtual memory.
b) Explain about External fragmentation in physical memory caused by Segmentation.
(8M+7M)
--- Content provided by FirstRanker.com ---
7. a) Explain the concept of Handshaking technique.b) Explain I/O Processor with a neat diagram. (5M+10M)
8. Explain Instruction Pipelines and its conflicts with Examples. (15M)
--- Content provided by FirstRanker.com ---
1 of 1
--- Content provided by FirstRanker.com ---
--- Content provided by FirstRanker.com ---
SET - 2
R10
--- Content provided by FirstRanker.com ---
|''|''|||''|'''|||'|Code No: R22054
II B. Tech II Semester Regular Examinations August - 2014
COMPUTER ORGANIZATION
--- Content provided by FirstRanker.com ---
(Com. to CSE, ECC)Time: 3 hours Max. Marks: 75
Answer any FIVE Questions
All Questions carry Equal Marks
--- Content provided by FirstRanker.com ---
~~~~~~~~~~~~~~~~~~~~~~~~~1. a) Explain about Data transfer instructions in Assembly Language Instructions.
b) What addressing mode is used by the following instructions for the 8085 micro processor?
--- Content provided by FirstRanker.com ---
i) SPHL ii) CMC iii) JUMP ? (8M+7M)2. a) Distinguish between SRAM and DRAM.
b) Explain the CPU internal Organization. (7M+8M)
--- Content provided by FirstRanker.com ---
3. a) Draw the State diagram for modulo 6 counter.b) What is a hardware description language? Explain the features of VHDL. (10M+5M)
4. Draw and explain the Generic Hardwired Control unit. (15M)
--- Content provided by FirstRanker.com ---
5. a) Show the Wallace tree to perform 6 ? 6 Multiplication.b) What is the result of the following operations on unsigned non-negative numbers using 1?s
complement.
i) 1011 0100 ? 0111 0111
ii) 1000 1011 + 0111 0100
--- Content provided by FirstRanker.com ---
iii) 10101.101+11011.001 (8M+7M)6. a) Explain about Locality of Reference.
b) Explain cache memory with Direct Mapping technique. (5M+10M)
--- Content provided by FirstRanker.com ---
7. a) Explain about Daisy Chaining.b) Explain incorporating Direct Memory Access into a computer system. (5M+10M)
8. a) Compare RISC and CISC processors.
b) Explain Multiprocessor system inter connection N/w topologies. (7M+8M)
--- Content provided by FirstRanker.com ---
1 of 1
--- Content provided by FirstRanker.com ---
SET - 3
R10
--- Content provided by FirstRanker.com ---
|''|''|||''|'''|||'|
Code No: R22054
--- Content provided by FirstRanker.com ---
II B. Tech II Semester Regular Examinations August - 2014COMPUTER ORGANIZATION
(Com. to CSE, ECC)
Time: 3 hours Max. Marks: 75
--- Content provided by FirstRanker.com ---
Answer any FIVE QuestionsAll Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~~
--- Content provided by FirstRanker.com ---
1. a) Explain about Instruction Set Architecture Design.b) Write a program for relatively Simple CPU to add the ten values in memory locations 1001H
through 100AH and store the result in memory location 1000H.Assume the result will
always be less than 256. (8M+7M)
--- Content provided by FirstRanker.com ---
2. a) Show the internal two dimensional configuration of a 32 ? 2 Memory chip.b) Show how the following values are stored in memory in big endian and little endian formats.
Each value starts at location 22H. i) 0927H ii) 5551212H (8M+7M)
3. a) Explain the operation of Toll Booth Controller.
--- Content provided by FirstRanker.com ---
b) Show the hardware to implement shl(x) micro-operation. X consists of four D flip-flops.Each micro-operation occurs when ? = 1. (8M+7M)
4. a) Explain briefly about micro sequencer operations.
b) Show the logic to generate the control signals for data register, address register and
--- Content provided by FirstRanker.com ---
instruction register of the relatively simple CPU. (8M+7M)5. Explain the Hardware implementation of Booth's multiplication algorithm. Discuss with an
example and draw the flow chart. (15M)
--- Content provided by FirstRanker.com ---
6. What is paging? Explain the conversion of logical address to physical address using the pagetable. (15M)
7. a) Distinguish between memory mapped I/O and I/O mapped I/O.
b) Explain the internal configuration of UART. (5M+10M)
--- Content provided by FirstRanker.com ---
8. a) Explain RISC processors briefly. Mention its advantages.
b) Explain about SIMD organization with neat sketch. (8M+7M)
--- Content provided by FirstRanker.com ---
1 of 1
SET - 4
--- Content provided by FirstRanker.com ---
R10FirstRanker.com - FirstRanker's Choice
--- Content provided by FirstRanker.com ---