Download PTU (I.K.Gujral Punjab Technical University (IKGPTU)) B-Tech (Bachelor of Technology) Mechanical Engineering 2020 December 4th Sem 77550 Theory Of Machines Ii Previous Question Paper
Roll No.
Total No. of Pages : 02
Total No. of Questions : 18
B.Tech (ME) (2018 Batch) (Sem. ?4)
THEORY OF MACHINES-II
Subject Code : BTME-405-18
M.Code : 77550
Time : 3 Hrs. Max. Marks : 60
INST RUCT IONS T O CANDIDAT ES :
1 .
SECT ION-A is COMPU LSORY cons isting of T EN Multip le Cho ic e question s
carry ing T WO marks each.
2 .
SECT ION-B c ontains F IVE questions c arrying FIVE marks eac h and s tud ents
have to atte mpt any FOUR q ues tions.
3 .
SECT ION-C contains THREE questions carrying T EN marks e ach and s tudents
have to atte mpt any T WO questio ns.
SECTION-A
Write briefly :
1.
What do you understand by free body diagrams?
2.
Describe the need for balancing of rotating parts.
3.
Explain backlash in gears.
4.
Define Velocity Ratio in context to gear train.
5.
Define Axial Pitch of a helical gear?
6.
Write least square techniques in reference to kinematics synthesis.
7.
Why is the reciprocating mass not completely balanced? Explain briefly.
8.
Write the gyroscopic couple equation explaining all its terms.
9.
Explain the transmission angle in reference to kinematic synthesis of mechanism.
10. Explain the term of point of concurrency.
1 | M-77550
(S2)-547
SECTION-B
11. What are the free body diagrams of a mechanism? Explain the implementation of this
concept for a four link mechanism.
12. What do you understand by balancing of reciprocating masses? Find out the primary and
secondary unbalanced forced for slider crank mechanism.
13. The inertia of the connecting rod can be replaced by two masses concentrated at two points
and connected rigidly together. How to determine the two masses so that it is dynamically
equivalent to the connecting rod? Show this.
14. Two parallel shafts are to be connected by spur gearing. The approximate distance between
the shafts is 600 mm. If one shaft runs at 120 r.p.m. and the other at 360 r.p.m., find the
number of teeth on each wheel, if the module is 8 mm. Also determine the exact distance
apart of the shafts.
15. For the four bar linkage, the following data are given :
2= 60?, 4= 90?, 2= 3 rad/sec, 2= ?1 rad/sec2, 4= 2 rad/sec, 4= 0. Determine the link
length ratios with the help of freudenstein's equation.
SECTION-C
16. A four cylinder vertical engine has cranks 150 mm long. The planes of rotation of the first,
second and fourth cranks are 400 mm, 200 mm and 200 mm respectively from the third
crank and their reciprocating masses are 50 kg, 60 kg and 50 kg respectively. Find the mass
of the reciprocating parts for the third cylinder and the relative angular positions of the
cranks in order that the engine may be in complete primary balance.
17. What do you understand by gyroscope? Discuss the effect of the gyroscopic couple on a
two wheeled vehicle when taking a turn with neat and clean diagram.
18. a) Two shafts, inclined at an angle of 65? and with a least distance between them of
175 mm are to be connected by spiral gears of normal pitch 15 mm to give a reduction
ratio 3:1. Find suitable diameters and numbers of teeth. Determine, also, the efficiency
if the spiral angles are determined by the condition of maximum efficiency. The friction
angle is 7?.
b) Derive an expression for the minimum number of teeth required on the pinion in order
to avoid interference in involute gear teeth when it meshes with wheel.
NOTE : Disclosure of Identity by writing Mobile No. or Making of passing request on
any page of Answer Sheet will lead to UMC against the Student.
2 | M-77550
(S2)-547
This post was last modified on 13 February 2021