Download Graduate Aptitude Test in Engineering (GATE) 2015 CE Civil Engineering CE02 Question Paper
CE 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 For what value of p the following set of equations will have no solution?
2 + 3 = 5
3 + = 10
Q.2
The integral ? with > > 0 is evaluated analytically as well as numerically using a
single application of the trapezoidal rule. If I is the exact value of the integral obtained analytically
and is the approximate value obtained using the trapezoidal rule, which of the following
statements is correct about their relationship?
(A) > (B) <
(C) = (D) Insufficient data to determine the relationship
Q.3 Consider the following probability mass function (p.m.f.) of a random variable X:
( , ) = if = 0
1 ? if = 1
0 otherwise
If q = 0.4, the variance of X is _______________.
Q.4 Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider
the following statements for workability of concrete:
(i) As the slump increases, the Vebe time increases
(ii) As the slump increases, the compaction factor increases
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
Q.5 Consider the following statements for air-entrained concrete:
(i) Air-entrainment reduces the water demand for a given level of workability
(ii) Use of air-entrained concrete is required in environments where cyclic freezing and
thawing is expected
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
FirstRanker.com - FirstRanker's Choice
GATE 2015 SET-1 CIVIL - CE
CE 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 For what value of p the following set of equations will have no solution?
2 + 3 = 5
3 + = 10
Q.2
The integral ? with > > 0 is evaluated analytically as well as numerically using a
single application of the trapezoidal rule. If I is the exact value of the integral obtained analytically
and is the approximate value obtained using the trapezoidal rule, which of the following
statements is correct about their relationship?
(A) > (B) <
(C) = (D) Insufficient data to determine the relationship
Q.3 Consider the following probability mass function (p.m.f.) of a random variable X:
( , ) = if = 0
1 ? if = 1
0 otherwise
If q = 0.4, the variance of X is _______________.
Q.4 Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider
the following statements for workability of concrete:
(i) As the slump increases, the Vebe time increases
(ii) As the slump increases, the compaction factor increases
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
Q.5 Consider the following statements for air-entrained concrete:
(i) Air-entrainment reduces the water demand for a given level of workability
(ii) Use of air-entrained concrete is required in environments where cyclic freezing and
thawing is expected
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
GATE 2015 SET-1 CIVIL - CE
CE 2/13
Q.6 Consider the singly reinforced beam shown in the figure below:
X
X
P P
L L L/2
At cross-section XX, which of the following statements is TRUE at the limit state?
(A) The variation of stress is linear and that of strain is non-linear
(B) The variation of strain is linear and that of stress is non-linear
(C) The variation of both stress and strain is linear
(D) The variation of both stress and strain is non-linear
Q.7 For the beam shown below, the stiffness coefficient K
22
can be written as
(A)
(B)
(C)
(D)
Q.8
The development length of a deformed reinforcement bar can be expressed as (1/k) ( ? ?
s
/ ?
bd
).
From the IS:456-2000, the value of can be calculated as _______________.
Q.9 For the beam shown below, the value of the support moment M is _______________ kN-m.
FirstRanker.com - FirstRanker's Choice
GATE 2015 SET-1 CIVIL - CE
CE 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 For what value of p the following set of equations will have no solution?
2 + 3 = 5
3 + = 10
Q.2
The integral ? with > > 0 is evaluated analytically as well as numerically using a
single application of the trapezoidal rule. If I is the exact value of the integral obtained analytically
and is the approximate value obtained using the trapezoidal rule, which of the following
statements is correct about their relationship?
(A) > (B) <
(C) = (D) Insufficient data to determine the relationship
Q.3 Consider the following probability mass function (p.m.f.) of a random variable X:
( , ) = if = 0
1 ? if = 1
0 otherwise
If q = 0.4, the variance of X is _______________.
Q.4 Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider
the following statements for workability of concrete:
(i) As the slump increases, the Vebe time increases
(ii) As the slump increases, the compaction factor increases
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
Q.5 Consider the following statements for air-entrained concrete:
(i) Air-entrainment reduces the water demand for a given level of workability
(ii) Use of air-entrained concrete is required in environments where cyclic freezing and
thawing is expected
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
GATE 2015 SET-1 CIVIL - CE
CE 2/13
Q.6 Consider the singly reinforced beam shown in the figure below:
X
X
P P
L L L/2
At cross-section XX, which of the following statements is TRUE at the limit state?
(A) The variation of stress is linear and that of strain is non-linear
(B) The variation of strain is linear and that of stress is non-linear
(C) The variation of both stress and strain is linear
(D) The variation of both stress and strain is non-linear
Q.7 For the beam shown below, the stiffness coefficient K
22
can be written as
(A)
(B)
(C)
(D)
Q.8
The development length of a deformed reinforcement bar can be expressed as (1/k) ( ? ?
s
/ ?
bd
).
From the IS:456-2000, the value of can be calculated as _______________.
Q.9 For the beam shown below, the value of the support moment M is _______________ kN-m.
GATE 2015 SET-1 CIVIL - CE
CE 3/13
Q.10 Two triangular wedges are glued together as shown in the following figure. The stress acting
normal to the interface, ?
is _______________ MPa.
Q.11 A fine-grained soil has 60% (by weight) silt content. The soil behaves as semi-solid when water
content is between 15% and 28%. The soil behaves fluid-like when the water content is more than
40%. The ?Activity? of the soil is
(A) 3.33 (B) 0.42 (C) 0.30 (D) 0.20
Q.12 Which of the following statements is TRUE for the relation between discharge velocity and seepage
velocity?
(A) Seepage velocity is always smaller than discharge velocity
(B) Seepage velocity can never be smaller than discharge velocity
(C) Seepage velocity is equal to the discharge velocity
(D) No relation between seepage velocity and discharge velocity can be established
Q.13 Which of the following statements is TRUE for degree of disturbance of collected soil sample?
(A) Thinner the sampler wall, lower the degree of disturbance of collected soil sample
(B) Thicker the sampler wall, lower the degree of disturbance of collected soil sample
(C) Thickness of the sampler wall and the degree of disturbance of collected soil sample are
unrelated
(D) The degree of disturbance of collected soil sample is proportional to the inner diameter of the
sampling tube
Q.14 In an unconsolidated undrained triaxial test, it is observed that an increase in cell pressure from 150
kPa to 250 kPa leads to a pore pressure increase of 80 kPa. It is further observed that, an increase of
50 kPa in deviatoric stress results in an increase of 25 kPa in the pore pressure. The value of
Skempton?s pore pressure parameter B is:
(A) 0.5 (B) 0.625 (C) 0.8 (D) 1.0
Q.15 Which of the following statements is NOT correct?
(A) Loose sand exhibits contractive behavior upon shearing
(B) Dense sand when sheared under undrained condition, may lead to generation of negative
pore pressure
(C) Black cotton soil exhibits expansive behavior
(D) Liquefaction is the phenomenon where cohesionless soil near the downstream side of dams
or sheet-piles loses its shear strength due to high upward hydraulic gradient
FirstRanker.com - FirstRanker's Choice
GATE 2015 SET-1 CIVIL - CE
CE 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 For what value of p the following set of equations will have no solution?
2 + 3 = 5
3 + = 10
Q.2
The integral ? with > > 0 is evaluated analytically as well as numerically using a
single application of the trapezoidal rule. If I is the exact value of the integral obtained analytically
and is the approximate value obtained using the trapezoidal rule, which of the following
statements is correct about their relationship?
(A) > (B) <
(C) = (D) Insufficient data to determine the relationship
Q.3 Consider the following probability mass function (p.m.f.) of a random variable X:
( , ) = if = 0
1 ? if = 1
0 otherwise
If q = 0.4, the variance of X is _______________.
Q.4 Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider
the following statements for workability of concrete:
(i) As the slump increases, the Vebe time increases
(ii) As the slump increases, the compaction factor increases
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
Q.5 Consider the following statements for air-entrained concrete:
(i) Air-entrainment reduces the water demand for a given level of workability
(ii) Use of air-entrained concrete is required in environments where cyclic freezing and
thawing is expected
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
GATE 2015 SET-1 CIVIL - CE
CE 2/13
Q.6 Consider the singly reinforced beam shown in the figure below:
X
X
P P
L L L/2
At cross-section XX, which of the following statements is TRUE at the limit state?
(A) The variation of stress is linear and that of strain is non-linear
(B) The variation of strain is linear and that of stress is non-linear
(C) The variation of both stress and strain is linear
(D) The variation of both stress and strain is non-linear
Q.7 For the beam shown below, the stiffness coefficient K
22
can be written as
(A)
(B)
(C)
(D)
Q.8
The development length of a deformed reinforcement bar can be expressed as (1/k) ( ? ?
s
/ ?
bd
).
From the IS:456-2000, the value of can be calculated as _______________.
Q.9 For the beam shown below, the value of the support moment M is _______________ kN-m.
GATE 2015 SET-1 CIVIL - CE
CE 3/13
Q.10 Two triangular wedges are glued together as shown in the following figure. The stress acting
normal to the interface, ?
is _______________ MPa.
Q.11 A fine-grained soil has 60% (by weight) silt content. The soil behaves as semi-solid when water
content is between 15% and 28%. The soil behaves fluid-like when the water content is more than
40%. The ?Activity? of the soil is
(A) 3.33 (B) 0.42 (C) 0.30 (D) 0.20
Q.12 Which of the following statements is TRUE for the relation between discharge velocity and seepage
velocity?
(A) Seepage velocity is always smaller than discharge velocity
(B) Seepage velocity can never be smaller than discharge velocity
(C) Seepage velocity is equal to the discharge velocity
(D) No relation between seepage velocity and discharge velocity can be established
Q.13 Which of the following statements is TRUE for degree of disturbance of collected soil sample?
(A) Thinner the sampler wall, lower the degree of disturbance of collected soil sample
(B) Thicker the sampler wall, lower the degree of disturbance of collected soil sample
(C) Thickness of the sampler wall and the degree of disturbance of collected soil sample are
unrelated
(D) The degree of disturbance of collected soil sample is proportional to the inner diameter of the
sampling tube
Q.14 In an unconsolidated undrained triaxial test, it is observed that an increase in cell pressure from 150
kPa to 250 kPa leads to a pore pressure increase of 80 kPa. It is further observed that, an increase of
50 kPa in deviatoric stress results in an increase of 25 kPa in the pore pressure. The value of
Skempton?s pore pressure parameter B is:
(A) 0.5 (B) 0.625 (C) 0.8 (D) 1.0
Q.15 Which of the following statements is NOT correct?
(A) Loose sand exhibits contractive behavior upon shearing
(B) Dense sand when sheared under undrained condition, may lead to generation of negative
pore pressure
(C) Black cotton soil exhibits expansive behavior
(D) Liquefaction is the phenomenon where cohesionless soil near the downstream side of dams
or sheet-piles loses its shear strength due to high upward hydraulic gradient
GATE 2015 SET-1 CIVIL - CE
CE 4/13
Q.16 In a two-dimensional steady flow field, in a certain region of the x-y plane, the velocity component
in the x-direction is given by = and the density varies as =
. Which of the following is a
valid expression for the velocity component in the y-direction, v
y
?
(A) = ? / (B) = / (C) = ? (D) =
Q.17 For steady incompressible flow through a closed-conduit of uniform cross-section, the direction of
flow will always be:
(A) from higher to lower elevation (B) from higher to lower pressure
(C) from higher to lower velocity (D) from higher to lower piezometric head
Q.18 A circular pipe has a diameter of 1 m, bed slope of 1 in 1000, and Manning?s roughness coefficient
equal to 0.01. It may be treated as an open channel flow when it is flowing just full, i.e., the water
level just touches the crest. The discharge in this condition is denoted by Q
full
. Similarly, the
discharge when the pipe is flowing half-full, i.e., with a flow depth of 0.5 m, is denoted by Q
half
.
The ratio Q
full
/ Q
half
is:
(A) 1
(B) ?2
(C) 2 (D) 4
Q.19
The two columns below show some parameters and their possible values.
Parameter Value
P ? Gross Command Area I ? 100 hectares/cumec
Q ? Permanent Wilting Point II ? 6 ?C
R ? Duty of canal water III ? 1000 hectares
S ? Delta of wheat IV ? 1000 cm
V ? 40 cm
VI ? 0.12
Which of the following options matches the parameters and the values correctly?
(A) P-I, Q-II, R-III, S-IV (B) P-III, Q-VI, R-I, S-V
(C) P-I, Q-V, R-VI, S-II (D) P-III, Q-II, R-V, S-IV
Q.20 Total Kjeldahl Nitrogen (TKN) concentration (mg/L as N) in domestic sewage is the sum of the
concentrations of:
(A) organic and inorganic nitrogen in sewage
(B) organic nitrogen and nitrate in sewage
(C) organic nitrogen and ammonia in sewage
(D) ammonia and nitrate in sewage
Q.21 Solid waste generated from an industry contains only two components, X and Y as shown in the
table below
Component Composition
(% weight)
Density
(kg/m
3
)
X c
1
?
1
Y c
2
?
2
Assuming (c
1
+ c
2
) = 100, the composite density of the solid waste ( ? ? is given by:
(A)
?
?
?
?
?
?
?
?
?
?
?
2
2
1
1
c c
100
(B)
c c
100
2
2
1
1
?
?
?
?
?
?
?
? ?
?
?
(C) ? ?
2 2 1 1
c c 100 ? ? ?
(D)
c c
100
2 2 1 1
2 1
?
?
?
?
?
?
?
?
? ? ?
? ?
FirstRanker.com - FirstRanker's Choice
GATE 2015 SET-1 CIVIL - CE
CE 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 For what value of p the following set of equations will have no solution?
2 + 3 = 5
3 + = 10
Q.2
The integral ? with > > 0 is evaluated analytically as well as numerically using a
single application of the trapezoidal rule. If I is the exact value of the integral obtained analytically
and is the approximate value obtained using the trapezoidal rule, which of the following
statements is correct about their relationship?
(A) > (B) <
(C) = (D) Insufficient data to determine the relationship
Q.3 Consider the following probability mass function (p.m.f.) of a random variable X:
( , ) = if = 0
1 ? if = 1
0 otherwise
If q = 0.4, the variance of X is _______________.
Q.4 Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider
the following statements for workability of concrete:
(i) As the slump increases, the Vebe time increases
(ii) As the slump increases, the compaction factor increases
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
Q.5 Consider the following statements for air-entrained concrete:
(i) Air-entrainment reduces the water demand for a given level of workability
(ii) Use of air-entrained concrete is required in environments where cyclic freezing and
thawing is expected
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
GATE 2015 SET-1 CIVIL - CE
CE 2/13
Q.6 Consider the singly reinforced beam shown in the figure below:
X
X
P P
L L L/2
At cross-section XX, which of the following statements is TRUE at the limit state?
(A) The variation of stress is linear and that of strain is non-linear
(B) The variation of strain is linear and that of stress is non-linear
(C) The variation of both stress and strain is linear
(D) The variation of both stress and strain is non-linear
Q.7 For the beam shown below, the stiffness coefficient K
22
can be written as
(A)
(B)
(C)
(D)
Q.8
The development length of a deformed reinforcement bar can be expressed as (1/k) ( ? ?
s
/ ?
bd
).
From the IS:456-2000, the value of can be calculated as _______________.
Q.9 For the beam shown below, the value of the support moment M is _______________ kN-m.
GATE 2015 SET-1 CIVIL - CE
CE 3/13
Q.10 Two triangular wedges are glued together as shown in the following figure. The stress acting
normal to the interface, ?
is _______________ MPa.
Q.11 A fine-grained soil has 60% (by weight) silt content. The soil behaves as semi-solid when water
content is between 15% and 28%. The soil behaves fluid-like when the water content is more than
40%. The ?Activity? of the soil is
(A) 3.33 (B) 0.42 (C) 0.30 (D) 0.20
Q.12 Which of the following statements is TRUE for the relation between discharge velocity and seepage
velocity?
(A) Seepage velocity is always smaller than discharge velocity
(B) Seepage velocity can never be smaller than discharge velocity
(C) Seepage velocity is equal to the discharge velocity
(D) No relation between seepage velocity and discharge velocity can be established
Q.13 Which of the following statements is TRUE for degree of disturbance of collected soil sample?
(A) Thinner the sampler wall, lower the degree of disturbance of collected soil sample
(B) Thicker the sampler wall, lower the degree of disturbance of collected soil sample
(C) Thickness of the sampler wall and the degree of disturbance of collected soil sample are
unrelated
(D) The degree of disturbance of collected soil sample is proportional to the inner diameter of the
sampling tube
Q.14 In an unconsolidated undrained triaxial test, it is observed that an increase in cell pressure from 150
kPa to 250 kPa leads to a pore pressure increase of 80 kPa. It is further observed that, an increase of
50 kPa in deviatoric stress results in an increase of 25 kPa in the pore pressure. The value of
Skempton?s pore pressure parameter B is:
(A) 0.5 (B) 0.625 (C) 0.8 (D) 1.0
Q.15 Which of the following statements is NOT correct?
(A) Loose sand exhibits contractive behavior upon shearing
(B) Dense sand when sheared under undrained condition, may lead to generation of negative
pore pressure
(C) Black cotton soil exhibits expansive behavior
(D) Liquefaction is the phenomenon where cohesionless soil near the downstream side of dams
or sheet-piles loses its shear strength due to high upward hydraulic gradient
GATE 2015 SET-1 CIVIL - CE
CE 4/13
Q.16 In a two-dimensional steady flow field, in a certain region of the x-y plane, the velocity component
in the x-direction is given by = and the density varies as =
. Which of the following is a
valid expression for the velocity component in the y-direction, v
y
?
(A) = ? / (B) = / (C) = ? (D) =
Q.17 For steady incompressible flow through a closed-conduit of uniform cross-section, the direction of
flow will always be:
(A) from higher to lower elevation (B) from higher to lower pressure
(C) from higher to lower velocity (D) from higher to lower piezometric head
Q.18 A circular pipe has a diameter of 1 m, bed slope of 1 in 1000, and Manning?s roughness coefficient
equal to 0.01. It may be treated as an open channel flow when it is flowing just full, i.e., the water
level just touches the crest. The discharge in this condition is denoted by Q
full
. Similarly, the
discharge when the pipe is flowing half-full, i.e., with a flow depth of 0.5 m, is denoted by Q
half
.
The ratio Q
full
/ Q
half
is:
(A) 1
(B) ?2
(C) 2 (D) 4
Q.19
The two columns below show some parameters and their possible values.
Parameter Value
P ? Gross Command Area I ? 100 hectares/cumec
Q ? Permanent Wilting Point II ? 6 ?C
R ? Duty of canal water III ? 1000 hectares
S ? Delta of wheat IV ? 1000 cm
V ? 40 cm
VI ? 0.12
Which of the following options matches the parameters and the values correctly?
(A) P-I, Q-II, R-III, S-IV (B) P-III, Q-VI, R-I, S-V
(C) P-I, Q-V, R-VI, S-II (D) P-III, Q-II, R-V, S-IV
Q.20 Total Kjeldahl Nitrogen (TKN) concentration (mg/L as N) in domestic sewage is the sum of the
concentrations of:
(A) organic and inorganic nitrogen in sewage
(B) organic nitrogen and nitrate in sewage
(C) organic nitrogen and ammonia in sewage
(D) ammonia and nitrate in sewage
Q.21 Solid waste generated from an industry contains only two components, X and Y as shown in the
table below
Component Composition
(% weight)
Density
(kg/m
3
)
X c
1
?
1
Y c
2
?
2
Assuming (c
1
+ c
2
) = 100, the composite density of the solid waste ( ? ? is given by:
(A)
?
?
?
?
?
?
?
?
?
?
?
2
2
1
1
c c
100
(B)
c c
100
2
2
1
1
?
?
?
?
?
?
?
? ?
?
?
(C) ? ?
2 2 1 1
c c 100 ? ? ?
(D)
c c
100
2 2 1 1
2 1
?
?
?
?
?
?
?
?
? ? ?
? ?
GATE 2015 SET-1 CIVIL - CE
CE 5/13
Q.22 The penetration value of a bitumen sample tested at 25?C is 80. When this sample is heated to 60?C
and tested again, the needle of the penetration test apparatus penetrates the bitumen sample by d
mm. The value of d CANNOT be less than _______________ mm.
Q.23 Which of the following statements CANNOT be used to describe free flow speed (u
f
) of a traffic
stream?
(A) u
f
is the speed when flow is negligible
(B) u
f
is the speed when density is negligible
(C) u
f
is affected by geometry and surface conditions of the road
(D) u
f
is the speed at which flow is maximum and density is optimum
Q.24 Which of the following statements is FALSE?
(A) Plumb line is along the direction of gravity
(B) Mean Sea Level (MSL) is used as a reference surface for establishing the horizontal control
(C) Mean Sea Level (MSL) is a simplification of the Geoid
(D) Geoid is an equi-potential surface of gravity
Q.25 In a closed loop traverse of 1 km total length, the closing errors in departure and latitude are 0.3 m
and 0.4 m, respectively. The relative precision of this traverse will be:
(A) 1: 5000 (B) 1: 4000 (C) 1: 3000 (D) 1: 2000
FirstRanker.com - FirstRanker's Choice
GATE 2015 SET-1 CIVIL - CE
CE 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 For what value of p the following set of equations will have no solution?
2 + 3 = 5
3 + = 10
Q.2
The integral ? with > > 0 is evaluated analytically as well as numerically using a
single application of the trapezoidal rule. If I is the exact value of the integral obtained analytically
and is the approximate value obtained using the trapezoidal rule, which of the following
statements is correct about their relationship?
(A) > (B) <
(C) = (D) Insufficient data to determine the relationship
Q.3 Consider the following probability mass function (p.m.f.) of a random variable X:
( , ) = if = 0
1 ? if = 1
0 otherwise
If q = 0.4, the variance of X is _______________.
Q.4 Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider
the following statements for workability of concrete:
(i) As the slump increases, the Vebe time increases
(ii) As the slump increases, the compaction factor increases
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
Q.5 Consider the following statements for air-entrained concrete:
(i) Air-entrainment reduces the water demand for a given level of workability
(ii) Use of air-entrained concrete is required in environments where cyclic freezing and
thawing is expected
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
GATE 2015 SET-1 CIVIL - CE
CE 2/13
Q.6 Consider the singly reinforced beam shown in the figure below:
X
X
P P
L L L/2
At cross-section XX, which of the following statements is TRUE at the limit state?
(A) The variation of stress is linear and that of strain is non-linear
(B) The variation of strain is linear and that of stress is non-linear
(C) The variation of both stress and strain is linear
(D) The variation of both stress and strain is non-linear
Q.7 For the beam shown below, the stiffness coefficient K
22
can be written as
(A)
(B)
(C)
(D)
Q.8
The development length of a deformed reinforcement bar can be expressed as (1/k) ( ? ?
s
/ ?
bd
).
From the IS:456-2000, the value of can be calculated as _______________.
Q.9 For the beam shown below, the value of the support moment M is _______________ kN-m.
GATE 2015 SET-1 CIVIL - CE
CE 3/13
Q.10 Two triangular wedges are glued together as shown in the following figure. The stress acting
normal to the interface, ?
is _______________ MPa.
Q.11 A fine-grained soil has 60% (by weight) silt content. The soil behaves as semi-solid when water
content is between 15% and 28%. The soil behaves fluid-like when the water content is more than
40%. The ?Activity? of the soil is
(A) 3.33 (B) 0.42 (C) 0.30 (D) 0.20
Q.12 Which of the following statements is TRUE for the relation between discharge velocity and seepage
velocity?
(A) Seepage velocity is always smaller than discharge velocity
(B) Seepage velocity can never be smaller than discharge velocity
(C) Seepage velocity is equal to the discharge velocity
(D) No relation between seepage velocity and discharge velocity can be established
Q.13 Which of the following statements is TRUE for degree of disturbance of collected soil sample?
(A) Thinner the sampler wall, lower the degree of disturbance of collected soil sample
(B) Thicker the sampler wall, lower the degree of disturbance of collected soil sample
(C) Thickness of the sampler wall and the degree of disturbance of collected soil sample are
unrelated
(D) The degree of disturbance of collected soil sample is proportional to the inner diameter of the
sampling tube
Q.14 In an unconsolidated undrained triaxial test, it is observed that an increase in cell pressure from 150
kPa to 250 kPa leads to a pore pressure increase of 80 kPa. It is further observed that, an increase of
50 kPa in deviatoric stress results in an increase of 25 kPa in the pore pressure. The value of
Skempton?s pore pressure parameter B is:
(A) 0.5 (B) 0.625 (C) 0.8 (D) 1.0
Q.15 Which of the following statements is NOT correct?
(A) Loose sand exhibits contractive behavior upon shearing
(B) Dense sand when sheared under undrained condition, may lead to generation of negative
pore pressure
(C) Black cotton soil exhibits expansive behavior
(D) Liquefaction is the phenomenon where cohesionless soil near the downstream side of dams
or sheet-piles loses its shear strength due to high upward hydraulic gradient
GATE 2015 SET-1 CIVIL - CE
CE 4/13
Q.16 In a two-dimensional steady flow field, in a certain region of the x-y plane, the velocity component
in the x-direction is given by = and the density varies as =
. Which of the following is a
valid expression for the velocity component in the y-direction, v
y
?
(A) = ? / (B) = / (C) = ? (D) =
Q.17 For steady incompressible flow through a closed-conduit of uniform cross-section, the direction of
flow will always be:
(A) from higher to lower elevation (B) from higher to lower pressure
(C) from higher to lower velocity (D) from higher to lower piezometric head
Q.18 A circular pipe has a diameter of 1 m, bed slope of 1 in 1000, and Manning?s roughness coefficient
equal to 0.01. It may be treated as an open channel flow when it is flowing just full, i.e., the water
level just touches the crest. The discharge in this condition is denoted by Q
full
. Similarly, the
discharge when the pipe is flowing half-full, i.e., with a flow depth of 0.5 m, is denoted by Q
half
.
The ratio Q
full
/ Q
half
is:
(A) 1
(B) ?2
(C) 2 (D) 4
Q.19
The two columns below show some parameters and their possible values.
Parameter Value
P ? Gross Command Area I ? 100 hectares/cumec
Q ? Permanent Wilting Point II ? 6 ?C
R ? Duty of canal water III ? 1000 hectares
S ? Delta of wheat IV ? 1000 cm
V ? 40 cm
VI ? 0.12
Which of the following options matches the parameters and the values correctly?
(A) P-I, Q-II, R-III, S-IV (B) P-III, Q-VI, R-I, S-V
(C) P-I, Q-V, R-VI, S-II (D) P-III, Q-II, R-V, S-IV
Q.20 Total Kjeldahl Nitrogen (TKN) concentration (mg/L as N) in domestic sewage is the sum of the
concentrations of:
(A) organic and inorganic nitrogen in sewage
(B) organic nitrogen and nitrate in sewage
(C) organic nitrogen and ammonia in sewage
(D) ammonia and nitrate in sewage
Q.21 Solid waste generated from an industry contains only two components, X and Y as shown in the
table below
Component Composition
(% weight)
Density
(kg/m
3
)
X c
1
?
1
Y c
2
?
2
Assuming (c
1
+ c
2
) = 100, the composite density of the solid waste ( ? ? is given by:
(A)
?
?
?
?
?
?
?
?
?
?
?
2
2
1
1
c c
100
(B)
c c
100
2
2
1
1
?
?
?
?
?
?
?
? ?
?
?
(C) ? ?
2 2 1 1
c c 100 ? ? ?
(D)
c c
100
2 2 1 1
2 1
?
?
?
?
?
?
?
?
? ? ?
? ?
GATE 2015 SET-1 CIVIL - CE
CE 5/13
Q.22 The penetration value of a bitumen sample tested at 25?C is 80. When this sample is heated to 60?C
and tested again, the needle of the penetration test apparatus penetrates the bitumen sample by d
mm. The value of d CANNOT be less than _______________ mm.
Q.23 Which of the following statements CANNOT be used to describe free flow speed (u
f
) of a traffic
stream?
(A) u
f
is the speed when flow is negligible
(B) u
f
is the speed when density is negligible
(C) u
f
is affected by geometry and surface conditions of the road
(D) u
f
is the speed at which flow is maximum and density is optimum
Q.24 Which of the following statements is FALSE?
(A) Plumb line is along the direction of gravity
(B) Mean Sea Level (MSL) is used as a reference surface for establishing the horizontal control
(C) Mean Sea Level (MSL) is a simplification of the Geoid
(D) Geoid is an equi-potential surface of gravity
Q.25 In a closed loop traverse of 1 km total length, the closing errors in departure and latitude are 0.3 m
and 0.4 m, respectively. The relative precision of this traverse will be:
(A) 1: 5000 (B) 1: 4000 (C) 1: 3000 (D) 1: 2000
GATE 2015 SET-1 CIVIL - CE
CE 6/13
Q. 26 ? Q. 55 carry two marks each.
Q.26 The smallest and largest Eigen values of the following matrix are:
?
?
?
?
?
?
?
?
?
?
?
?
?
5 3 2
6 4 4
2 2 3
(A) 1.5 and 2.5 (B) 0.5 and 2.5 (C) 1.0 and 3.0 (D) 1.0 and 2.0
Q.27 The quadratic equation ? 4 + 4 = 0 is to be solved numerically, starting with the initial guess
= 3. The Newton-Raphson method is applied once to get a new estimate and then the Secant
method is applied once using the initial guess and this new estimate. The estimated value of the root
after the application of the Secant method is _______________.
Q.28 Consider the following differential equation:
( d + d ) cos
= ( d ? dx) sin
Which of the following is the solution of the above equation (c is an arbitrary constant)?
(A)
cos
= (B)
sin
= (C) cos
= (D) sin
=
Q.29 Consider the following complex function:
f(z) =
9
(z ? 1)(z + 2)
Which of the following is one of the residues of the above function?
(A) ?1 (B) 9/16 (C) 2 (D) 9
Q.30 The directional derivative of the field ( , , ) = ? 3 in the direction of the vector
( ? + ? ? 2 ) at point (2, ?1, 4) is _______________.
Q.31 The composition of an air-entrained concrete is given below:
Water : 184 kg/m
3
Ordinary Portland Cement (OPC) : 368 kg/m
3
Sand : 606 kg/m
3
Coarse aggregate : 1155 kg/m
3
Assume the specific gravity of OPC, sand and coarse aggregate to be 3.14, 2.67 and 2.74,
respectively. The air content is _______________ liters/ m
3
.
FirstRanker.com - FirstRanker's Choice
GATE 2015 SET-1 CIVIL - CE
CE 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 For what value of p the following set of equations will have no solution?
2 + 3 = 5
3 + = 10
Q.2
The integral ? with > > 0 is evaluated analytically as well as numerically using a
single application of the trapezoidal rule. If I is the exact value of the integral obtained analytically
and is the approximate value obtained using the trapezoidal rule, which of the following
statements is correct about their relationship?
(A) > (B) <
(C) = (D) Insufficient data to determine the relationship
Q.3 Consider the following probability mass function (p.m.f.) of a random variable X:
( , ) = if = 0
1 ? if = 1
0 otherwise
If q = 0.4, the variance of X is _______________.
Q.4 Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider
the following statements for workability of concrete:
(i) As the slump increases, the Vebe time increases
(ii) As the slump increases, the compaction factor increases
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
Q.5 Consider the following statements for air-entrained concrete:
(i) Air-entrainment reduces the water demand for a given level of workability
(ii) Use of air-entrained concrete is required in environments where cyclic freezing and
thawing is expected
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
GATE 2015 SET-1 CIVIL - CE
CE 2/13
Q.6 Consider the singly reinforced beam shown in the figure below:
X
X
P P
L L L/2
At cross-section XX, which of the following statements is TRUE at the limit state?
(A) The variation of stress is linear and that of strain is non-linear
(B) The variation of strain is linear and that of stress is non-linear
(C) The variation of both stress and strain is linear
(D) The variation of both stress and strain is non-linear
Q.7 For the beam shown below, the stiffness coefficient K
22
can be written as
(A)
(B)
(C)
(D)
Q.8
The development length of a deformed reinforcement bar can be expressed as (1/k) ( ? ?
s
/ ?
bd
).
From the IS:456-2000, the value of can be calculated as _______________.
Q.9 For the beam shown below, the value of the support moment M is _______________ kN-m.
GATE 2015 SET-1 CIVIL - CE
CE 3/13
Q.10 Two triangular wedges are glued together as shown in the following figure. The stress acting
normal to the interface, ?
is _______________ MPa.
Q.11 A fine-grained soil has 60% (by weight) silt content. The soil behaves as semi-solid when water
content is between 15% and 28%. The soil behaves fluid-like when the water content is more than
40%. The ?Activity? of the soil is
(A) 3.33 (B) 0.42 (C) 0.30 (D) 0.20
Q.12 Which of the following statements is TRUE for the relation between discharge velocity and seepage
velocity?
(A) Seepage velocity is always smaller than discharge velocity
(B) Seepage velocity can never be smaller than discharge velocity
(C) Seepage velocity is equal to the discharge velocity
(D) No relation between seepage velocity and discharge velocity can be established
Q.13 Which of the following statements is TRUE for degree of disturbance of collected soil sample?
(A) Thinner the sampler wall, lower the degree of disturbance of collected soil sample
(B) Thicker the sampler wall, lower the degree of disturbance of collected soil sample
(C) Thickness of the sampler wall and the degree of disturbance of collected soil sample are
unrelated
(D) The degree of disturbance of collected soil sample is proportional to the inner diameter of the
sampling tube
Q.14 In an unconsolidated undrained triaxial test, it is observed that an increase in cell pressure from 150
kPa to 250 kPa leads to a pore pressure increase of 80 kPa. It is further observed that, an increase of
50 kPa in deviatoric stress results in an increase of 25 kPa in the pore pressure. The value of
Skempton?s pore pressure parameter B is:
(A) 0.5 (B) 0.625 (C) 0.8 (D) 1.0
Q.15 Which of the following statements is NOT correct?
(A) Loose sand exhibits contractive behavior upon shearing
(B) Dense sand when sheared under undrained condition, may lead to generation of negative
pore pressure
(C) Black cotton soil exhibits expansive behavior
(D) Liquefaction is the phenomenon where cohesionless soil near the downstream side of dams
or sheet-piles loses its shear strength due to high upward hydraulic gradient
GATE 2015 SET-1 CIVIL - CE
CE 4/13
Q.16 In a two-dimensional steady flow field, in a certain region of the x-y plane, the velocity component
in the x-direction is given by = and the density varies as =
. Which of the following is a
valid expression for the velocity component in the y-direction, v
y
?
(A) = ? / (B) = / (C) = ? (D) =
Q.17 For steady incompressible flow through a closed-conduit of uniform cross-section, the direction of
flow will always be:
(A) from higher to lower elevation (B) from higher to lower pressure
(C) from higher to lower velocity (D) from higher to lower piezometric head
Q.18 A circular pipe has a diameter of 1 m, bed slope of 1 in 1000, and Manning?s roughness coefficient
equal to 0.01. It may be treated as an open channel flow when it is flowing just full, i.e., the water
level just touches the crest. The discharge in this condition is denoted by Q
full
. Similarly, the
discharge when the pipe is flowing half-full, i.e., with a flow depth of 0.5 m, is denoted by Q
half
.
The ratio Q
full
/ Q
half
is:
(A) 1
(B) ?2
(C) 2 (D) 4
Q.19
The two columns below show some parameters and their possible values.
Parameter Value
P ? Gross Command Area I ? 100 hectares/cumec
Q ? Permanent Wilting Point II ? 6 ?C
R ? Duty of canal water III ? 1000 hectares
S ? Delta of wheat IV ? 1000 cm
V ? 40 cm
VI ? 0.12
Which of the following options matches the parameters and the values correctly?
(A) P-I, Q-II, R-III, S-IV (B) P-III, Q-VI, R-I, S-V
(C) P-I, Q-V, R-VI, S-II (D) P-III, Q-II, R-V, S-IV
Q.20 Total Kjeldahl Nitrogen (TKN) concentration (mg/L as N) in domestic sewage is the sum of the
concentrations of:
(A) organic and inorganic nitrogen in sewage
(B) organic nitrogen and nitrate in sewage
(C) organic nitrogen and ammonia in sewage
(D) ammonia and nitrate in sewage
Q.21 Solid waste generated from an industry contains only two components, X and Y as shown in the
table below
Component Composition
(% weight)
Density
(kg/m
3
)
X c
1
?
1
Y c
2
?
2
Assuming (c
1
+ c
2
) = 100, the composite density of the solid waste ( ? ? is given by:
(A)
?
?
?
?
?
?
?
?
?
?
?
2
2
1
1
c c
100
(B)
c c
100
2
2
1
1
?
?
?
?
?
?
?
? ?
?
?
(C) ? ?
2 2 1 1
c c 100 ? ? ?
(D)
c c
100
2 2 1 1
2 1
?
?
?
?
?
?
?
?
? ? ?
? ?
GATE 2015 SET-1 CIVIL - CE
CE 5/13
Q.22 The penetration value of a bitumen sample tested at 25?C is 80. When this sample is heated to 60?C
and tested again, the needle of the penetration test apparatus penetrates the bitumen sample by d
mm. The value of d CANNOT be less than _______________ mm.
Q.23 Which of the following statements CANNOT be used to describe free flow speed (u
f
) of a traffic
stream?
(A) u
f
is the speed when flow is negligible
(B) u
f
is the speed when density is negligible
(C) u
f
is affected by geometry and surface conditions of the road
(D) u
f
is the speed at which flow is maximum and density is optimum
Q.24 Which of the following statements is FALSE?
(A) Plumb line is along the direction of gravity
(B) Mean Sea Level (MSL) is used as a reference surface for establishing the horizontal control
(C) Mean Sea Level (MSL) is a simplification of the Geoid
(D) Geoid is an equi-potential surface of gravity
Q.25 In a closed loop traverse of 1 km total length, the closing errors in departure and latitude are 0.3 m
and 0.4 m, respectively. The relative precision of this traverse will be:
(A) 1: 5000 (B) 1: 4000 (C) 1: 3000 (D) 1: 2000
GATE 2015 SET-1 CIVIL - CE
CE 6/13
Q. 26 ? Q. 55 carry two marks each.
Q.26 The smallest and largest Eigen values of the following matrix are:
?
?
?
?
?
?
?
?
?
?
?
?
?
5 3 2
6 4 4
2 2 3
(A) 1.5 and 2.5 (B) 0.5 and 2.5 (C) 1.0 and 3.0 (D) 1.0 and 2.0
Q.27 The quadratic equation ? 4 + 4 = 0 is to be solved numerically, starting with the initial guess
= 3. The Newton-Raphson method is applied once to get a new estimate and then the Secant
method is applied once using the initial guess and this new estimate. The estimated value of the root
after the application of the Secant method is _______________.
Q.28 Consider the following differential equation:
( d + d ) cos
= ( d ? dx) sin
Which of the following is the solution of the above equation (c is an arbitrary constant)?
(A)
cos
= (B)
sin
= (C) cos
= (D) sin
=
Q.29 Consider the following complex function:
f(z) =
9
(z ? 1)(z + 2)
Which of the following is one of the residues of the above function?
(A) ?1 (B) 9/16 (C) 2 (D) 9
Q.30 The directional derivative of the field ( , , ) = ? 3 in the direction of the vector
( ? + ? ? 2 ) at point (2, ?1, 4) is _______________.
Q.31 The composition of an air-entrained concrete is given below:
Water : 184 kg/m
3
Ordinary Portland Cement (OPC) : 368 kg/m
3
Sand : 606 kg/m
3
Coarse aggregate : 1155 kg/m
3
Assume the specific gravity of OPC, sand and coarse aggregate to be 3.14, 2.67 and 2.74,
respectively. The air content is _______________ liters/ m
3
.
GATE 2015 SET-1 CIVIL - CE
CE 7/13
Q.32 A bracket plate connected to a column flange transmits a load of 100 kN as shown in the following
figure. The maximum force for which the bolts should be designed is _______________ kN.
600
100 kN
75 75
75 75
All dimensions are in mm
Q.33 Consider the singly reinforced beam section given below (left figure). The stress block parameters
for the cross-section from IS:456-2000 are also given below (right figure). The moment of
resistance for the given section by the limit state method is _______________ kN-m.
Q.34 For formation of collapse mechanism in the following figure, the minimum value of P
u
is cM
p
/L.
M
p
and 3M
p
denote the plastic moment capacities of beam sections as shown in this figure. The
value of c is _______________.
FirstRanker.com - FirstRanker's Choice
GATE 2015 SET-1 CIVIL - CE
CE 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 For what value of p the following set of equations will have no solution?
2 + 3 = 5
3 + = 10
Q.2
The integral ? with > > 0 is evaluated analytically as well as numerically using a
single application of the trapezoidal rule. If I is the exact value of the integral obtained analytically
and is the approximate value obtained using the trapezoidal rule, which of the following
statements is correct about their relationship?
(A) > (B) <
(C) = (D) Insufficient data to determine the relationship
Q.3 Consider the following probability mass function (p.m.f.) of a random variable X:
( , ) = if = 0
1 ? if = 1
0 otherwise
If q = 0.4, the variance of X is _______________.
Q.4 Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider
the following statements for workability of concrete:
(i) As the slump increases, the Vebe time increases
(ii) As the slump increases, the compaction factor increases
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
Q.5 Consider the following statements for air-entrained concrete:
(i) Air-entrainment reduces the water demand for a given level of workability
(ii) Use of air-entrained concrete is required in environments where cyclic freezing and
thawing is expected
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
GATE 2015 SET-1 CIVIL - CE
CE 2/13
Q.6 Consider the singly reinforced beam shown in the figure below:
X
X
P P
L L L/2
At cross-section XX, which of the following statements is TRUE at the limit state?
(A) The variation of stress is linear and that of strain is non-linear
(B) The variation of strain is linear and that of stress is non-linear
(C) The variation of both stress and strain is linear
(D) The variation of both stress and strain is non-linear
Q.7 For the beam shown below, the stiffness coefficient K
22
can be written as
(A)
(B)
(C)
(D)
Q.8
The development length of a deformed reinforcement bar can be expressed as (1/k) ( ? ?
s
/ ?
bd
).
From the IS:456-2000, the value of can be calculated as _______________.
Q.9 For the beam shown below, the value of the support moment M is _______________ kN-m.
GATE 2015 SET-1 CIVIL - CE
CE 3/13
Q.10 Two triangular wedges are glued together as shown in the following figure. The stress acting
normal to the interface, ?
is _______________ MPa.
Q.11 A fine-grained soil has 60% (by weight) silt content. The soil behaves as semi-solid when water
content is between 15% and 28%. The soil behaves fluid-like when the water content is more than
40%. The ?Activity? of the soil is
(A) 3.33 (B) 0.42 (C) 0.30 (D) 0.20
Q.12 Which of the following statements is TRUE for the relation between discharge velocity and seepage
velocity?
(A) Seepage velocity is always smaller than discharge velocity
(B) Seepage velocity can never be smaller than discharge velocity
(C) Seepage velocity is equal to the discharge velocity
(D) No relation between seepage velocity and discharge velocity can be established
Q.13 Which of the following statements is TRUE for degree of disturbance of collected soil sample?
(A) Thinner the sampler wall, lower the degree of disturbance of collected soil sample
(B) Thicker the sampler wall, lower the degree of disturbance of collected soil sample
(C) Thickness of the sampler wall and the degree of disturbance of collected soil sample are
unrelated
(D) The degree of disturbance of collected soil sample is proportional to the inner diameter of the
sampling tube
Q.14 In an unconsolidated undrained triaxial test, it is observed that an increase in cell pressure from 150
kPa to 250 kPa leads to a pore pressure increase of 80 kPa. It is further observed that, an increase of
50 kPa in deviatoric stress results in an increase of 25 kPa in the pore pressure. The value of
Skempton?s pore pressure parameter B is:
(A) 0.5 (B) 0.625 (C) 0.8 (D) 1.0
Q.15 Which of the following statements is NOT correct?
(A) Loose sand exhibits contractive behavior upon shearing
(B) Dense sand when sheared under undrained condition, may lead to generation of negative
pore pressure
(C) Black cotton soil exhibits expansive behavior
(D) Liquefaction is the phenomenon where cohesionless soil near the downstream side of dams
or sheet-piles loses its shear strength due to high upward hydraulic gradient
GATE 2015 SET-1 CIVIL - CE
CE 4/13
Q.16 In a two-dimensional steady flow field, in a certain region of the x-y plane, the velocity component
in the x-direction is given by = and the density varies as =
. Which of the following is a
valid expression for the velocity component in the y-direction, v
y
?
(A) = ? / (B) = / (C) = ? (D) =
Q.17 For steady incompressible flow through a closed-conduit of uniform cross-section, the direction of
flow will always be:
(A) from higher to lower elevation (B) from higher to lower pressure
(C) from higher to lower velocity (D) from higher to lower piezometric head
Q.18 A circular pipe has a diameter of 1 m, bed slope of 1 in 1000, and Manning?s roughness coefficient
equal to 0.01. It may be treated as an open channel flow when it is flowing just full, i.e., the water
level just touches the crest. The discharge in this condition is denoted by Q
full
. Similarly, the
discharge when the pipe is flowing half-full, i.e., with a flow depth of 0.5 m, is denoted by Q
half
.
The ratio Q
full
/ Q
half
is:
(A) 1
(B) ?2
(C) 2 (D) 4
Q.19
The two columns below show some parameters and their possible values.
Parameter Value
P ? Gross Command Area I ? 100 hectares/cumec
Q ? Permanent Wilting Point II ? 6 ?C
R ? Duty of canal water III ? 1000 hectares
S ? Delta of wheat IV ? 1000 cm
V ? 40 cm
VI ? 0.12
Which of the following options matches the parameters and the values correctly?
(A) P-I, Q-II, R-III, S-IV (B) P-III, Q-VI, R-I, S-V
(C) P-I, Q-V, R-VI, S-II (D) P-III, Q-II, R-V, S-IV
Q.20 Total Kjeldahl Nitrogen (TKN) concentration (mg/L as N) in domestic sewage is the sum of the
concentrations of:
(A) organic and inorganic nitrogen in sewage
(B) organic nitrogen and nitrate in sewage
(C) organic nitrogen and ammonia in sewage
(D) ammonia and nitrate in sewage
Q.21 Solid waste generated from an industry contains only two components, X and Y as shown in the
table below
Component Composition
(% weight)
Density
(kg/m
3
)
X c
1
?
1
Y c
2
?
2
Assuming (c
1
+ c
2
) = 100, the composite density of the solid waste ( ? ? is given by:
(A)
?
?
?
?
?
?
?
?
?
?
?
2
2
1
1
c c
100
(B)
c c
100
2
2
1
1
?
?
?
?
?
?
?
? ?
?
?
(C) ? ?
2 2 1 1
c c 100 ? ? ?
(D)
c c
100
2 2 1 1
2 1
?
?
?
?
?
?
?
?
? ? ?
? ?
GATE 2015 SET-1 CIVIL - CE
CE 5/13
Q.22 The penetration value of a bitumen sample tested at 25?C is 80. When this sample is heated to 60?C
and tested again, the needle of the penetration test apparatus penetrates the bitumen sample by d
mm. The value of d CANNOT be less than _______________ mm.
Q.23 Which of the following statements CANNOT be used to describe free flow speed (u
f
) of a traffic
stream?
(A) u
f
is the speed when flow is negligible
(B) u
f
is the speed when density is negligible
(C) u
f
is affected by geometry and surface conditions of the road
(D) u
f
is the speed at which flow is maximum and density is optimum
Q.24 Which of the following statements is FALSE?
(A) Plumb line is along the direction of gravity
(B) Mean Sea Level (MSL) is used as a reference surface for establishing the horizontal control
(C) Mean Sea Level (MSL) is a simplification of the Geoid
(D) Geoid is an equi-potential surface of gravity
Q.25 In a closed loop traverse of 1 km total length, the closing errors in departure and latitude are 0.3 m
and 0.4 m, respectively. The relative precision of this traverse will be:
(A) 1: 5000 (B) 1: 4000 (C) 1: 3000 (D) 1: 2000
GATE 2015 SET-1 CIVIL - CE
CE 6/13
Q. 26 ? Q. 55 carry two marks each.
Q.26 The smallest and largest Eigen values of the following matrix are:
?
?
?
?
?
?
?
?
?
?
?
?
?
5 3 2
6 4 4
2 2 3
(A) 1.5 and 2.5 (B) 0.5 and 2.5 (C) 1.0 and 3.0 (D) 1.0 and 2.0
Q.27 The quadratic equation ? 4 + 4 = 0 is to be solved numerically, starting with the initial guess
= 3. The Newton-Raphson method is applied once to get a new estimate and then the Secant
method is applied once using the initial guess and this new estimate. The estimated value of the root
after the application of the Secant method is _______________.
Q.28 Consider the following differential equation:
( d + d ) cos
= ( d ? dx) sin
Which of the following is the solution of the above equation (c is an arbitrary constant)?
(A)
cos
= (B)
sin
= (C) cos
= (D) sin
=
Q.29 Consider the following complex function:
f(z) =
9
(z ? 1)(z + 2)
Which of the following is one of the residues of the above function?
(A) ?1 (B) 9/16 (C) 2 (D) 9
Q.30 The directional derivative of the field ( , , ) = ? 3 in the direction of the vector
( ? + ? ? 2 ) at point (2, ?1, 4) is _______________.
Q.31 The composition of an air-entrained concrete is given below:
Water : 184 kg/m
3
Ordinary Portland Cement (OPC) : 368 kg/m
3
Sand : 606 kg/m
3
Coarse aggregate : 1155 kg/m
3
Assume the specific gravity of OPC, sand and coarse aggregate to be 3.14, 2.67 and 2.74,
respectively. The air content is _______________ liters/ m
3
.
GATE 2015 SET-1 CIVIL - CE
CE 7/13
Q.32 A bracket plate connected to a column flange transmits a load of 100 kN as shown in the following
figure. The maximum force for which the bolts should be designed is _______________ kN.
600
100 kN
75 75
75 75
All dimensions are in mm
Q.33 Consider the singly reinforced beam section given below (left figure). The stress block parameters
for the cross-section from IS:456-2000 are also given below (right figure). The moment of
resistance for the given section by the limit state method is _______________ kN-m.
Q.34 For formation of collapse mechanism in the following figure, the minimum value of P
u
is cM
p
/L.
M
p
and 3M
p
denote the plastic moment capacities of beam sections as shown in this figure. The
value of c is _______________.
GATE 2015 SET-1 CIVIL - CE
CE 8/13
Q.35 A tapered circular rod of diameter varying from 20 mm to 10 mm is connected to another uniform
circular rod of diameter 10 mm as shown in the following figure. Both bars are made of same
material with the modulus of elasticity, E = 2x10
5
MPa. When subjected to a load P = 30? kN, the
deflection at point A is _______________ mm.
Q.36 Two beams are connected by a linear spring as shown in the following figure. For a load P as
shown in the figure, the percentage of the applied load P carried by the spring is _______________.
FirstRanker.com - FirstRanker's Choice
GATE 2015 SET-1 CIVIL - CE
CE 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 For what value of p the following set of equations will have no solution?
2 + 3 = 5
3 + = 10
Q.2
The integral ? with > > 0 is evaluated analytically as well as numerically using a
single application of the trapezoidal rule. If I is the exact value of the integral obtained analytically
and is the approximate value obtained using the trapezoidal rule, which of the following
statements is correct about their relationship?
(A) > (B) <
(C) = (D) Insufficient data to determine the relationship
Q.3 Consider the following probability mass function (p.m.f.) of a random variable X:
( , ) = if = 0
1 ? if = 1
0 otherwise
If q = 0.4, the variance of X is _______________.
Q.4 Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider
the following statements for workability of concrete:
(i) As the slump increases, the Vebe time increases
(ii) As the slump increases, the compaction factor increases
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
Q.5 Consider the following statements for air-entrained concrete:
(i) Air-entrainment reduces the water demand for a given level of workability
(ii) Use of air-entrained concrete is required in environments where cyclic freezing and
thawing is expected
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
GATE 2015 SET-1 CIVIL - CE
CE 2/13
Q.6 Consider the singly reinforced beam shown in the figure below:
X
X
P P
L L L/2
At cross-section XX, which of the following statements is TRUE at the limit state?
(A) The variation of stress is linear and that of strain is non-linear
(B) The variation of strain is linear and that of stress is non-linear
(C) The variation of both stress and strain is linear
(D) The variation of both stress and strain is non-linear
Q.7 For the beam shown below, the stiffness coefficient K
22
can be written as
(A)
(B)
(C)
(D)
Q.8
The development length of a deformed reinforcement bar can be expressed as (1/k) ( ? ?
s
/ ?
bd
).
From the IS:456-2000, the value of can be calculated as _______________.
Q.9 For the beam shown below, the value of the support moment M is _______________ kN-m.
GATE 2015 SET-1 CIVIL - CE
CE 3/13
Q.10 Two triangular wedges are glued together as shown in the following figure. The stress acting
normal to the interface, ?
is _______________ MPa.
Q.11 A fine-grained soil has 60% (by weight) silt content. The soil behaves as semi-solid when water
content is between 15% and 28%. The soil behaves fluid-like when the water content is more than
40%. The ?Activity? of the soil is
(A) 3.33 (B) 0.42 (C) 0.30 (D) 0.20
Q.12 Which of the following statements is TRUE for the relation between discharge velocity and seepage
velocity?
(A) Seepage velocity is always smaller than discharge velocity
(B) Seepage velocity can never be smaller than discharge velocity
(C) Seepage velocity is equal to the discharge velocity
(D) No relation between seepage velocity and discharge velocity can be established
Q.13 Which of the following statements is TRUE for degree of disturbance of collected soil sample?
(A) Thinner the sampler wall, lower the degree of disturbance of collected soil sample
(B) Thicker the sampler wall, lower the degree of disturbance of collected soil sample
(C) Thickness of the sampler wall and the degree of disturbance of collected soil sample are
unrelated
(D) The degree of disturbance of collected soil sample is proportional to the inner diameter of the
sampling tube
Q.14 In an unconsolidated undrained triaxial test, it is observed that an increase in cell pressure from 150
kPa to 250 kPa leads to a pore pressure increase of 80 kPa. It is further observed that, an increase of
50 kPa in deviatoric stress results in an increase of 25 kPa in the pore pressure. The value of
Skempton?s pore pressure parameter B is:
(A) 0.5 (B) 0.625 (C) 0.8 (D) 1.0
Q.15 Which of the following statements is NOT correct?
(A) Loose sand exhibits contractive behavior upon shearing
(B) Dense sand when sheared under undrained condition, may lead to generation of negative
pore pressure
(C) Black cotton soil exhibits expansive behavior
(D) Liquefaction is the phenomenon where cohesionless soil near the downstream side of dams
or sheet-piles loses its shear strength due to high upward hydraulic gradient
GATE 2015 SET-1 CIVIL - CE
CE 4/13
Q.16 In a two-dimensional steady flow field, in a certain region of the x-y plane, the velocity component
in the x-direction is given by = and the density varies as =
. Which of the following is a
valid expression for the velocity component in the y-direction, v
y
?
(A) = ? / (B) = / (C) = ? (D) =
Q.17 For steady incompressible flow through a closed-conduit of uniform cross-section, the direction of
flow will always be:
(A) from higher to lower elevation (B) from higher to lower pressure
(C) from higher to lower velocity (D) from higher to lower piezometric head
Q.18 A circular pipe has a diameter of 1 m, bed slope of 1 in 1000, and Manning?s roughness coefficient
equal to 0.01. It may be treated as an open channel flow when it is flowing just full, i.e., the water
level just touches the crest. The discharge in this condition is denoted by Q
full
. Similarly, the
discharge when the pipe is flowing half-full, i.e., with a flow depth of 0.5 m, is denoted by Q
half
.
The ratio Q
full
/ Q
half
is:
(A) 1
(B) ?2
(C) 2 (D) 4
Q.19
The two columns below show some parameters and their possible values.
Parameter Value
P ? Gross Command Area I ? 100 hectares/cumec
Q ? Permanent Wilting Point II ? 6 ?C
R ? Duty of canal water III ? 1000 hectares
S ? Delta of wheat IV ? 1000 cm
V ? 40 cm
VI ? 0.12
Which of the following options matches the parameters and the values correctly?
(A) P-I, Q-II, R-III, S-IV (B) P-III, Q-VI, R-I, S-V
(C) P-I, Q-V, R-VI, S-II (D) P-III, Q-II, R-V, S-IV
Q.20 Total Kjeldahl Nitrogen (TKN) concentration (mg/L as N) in domestic sewage is the sum of the
concentrations of:
(A) organic and inorganic nitrogen in sewage
(B) organic nitrogen and nitrate in sewage
(C) organic nitrogen and ammonia in sewage
(D) ammonia and nitrate in sewage
Q.21 Solid waste generated from an industry contains only two components, X and Y as shown in the
table below
Component Composition
(% weight)
Density
(kg/m
3
)
X c
1
?
1
Y c
2
?
2
Assuming (c
1
+ c
2
) = 100, the composite density of the solid waste ( ? ? is given by:
(A)
?
?
?
?
?
?
?
?
?
?
?
2
2
1
1
c c
100
(B)
c c
100
2
2
1
1
?
?
?
?
?
?
?
? ?
?
?
(C) ? ?
2 2 1 1
c c 100 ? ? ?
(D)
c c
100
2 2 1 1
2 1
?
?
?
?
?
?
?
?
? ? ?
? ?
GATE 2015 SET-1 CIVIL - CE
CE 5/13
Q.22 The penetration value of a bitumen sample tested at 25?C is 80. When this sample is heated to 60?C
and tested again, the needle of the penetration test apparatus penetrates the bitumen sample by d
mm. The value of d CANNOT be less than _______________ mm.
Q.23 Which of the following statements CANNOT be used to describe free flow speed (u
f
) of a traffic
stream?
(A) u
f
is the speed when flow is negligible
(B) u
f
is the speed when density is negligible
(C) u
f
is affected by geometry and surface conditions of the road
(D) u
f
is the speed at which flow is maximum and density is optimum
Q.24 Which of the following statements is FALSE?
(A) Plumb line is along the direction of gravity
(B) Mean Sea Level (MSL) is used as a reference surface for establishing the horizontal control
(C) Mean Sea Level (MSL) is a simplification of the Geoid
(D) Geoid is an equi-potential surface of gravity
Q.25 In a closed loop traverse of 1 km total length, the closing errors in departure and latitude are 0.3 m
and 0.4 m, respectively. The relative precision of this traverse will be:
(A) 1: 5000 (B) 1: 4000 (C) 1: 3000 (D) 1: 2000
GATE 2015 SET-1 CIVIL - CE
CE 6/13
Q. 26 ? Q. 55 carry two marks each.
Q.26 The smallest and largest Eigen values of the following matrix are:
?
?
?
?
?
?
?
?
?
?
?
?
?
5 3 2
6 4 4
2 2 3
(A) 1.5 and 2.5 (B) 0.5 and 2.5 (C) 1.0 and 3.0 (D) 1.0 and 2.0
Q.27 The quadratic equation ? 4 + 4 = 0 is to be solved numerically, starting with the initial guess
= 3. The Newton-Raphson method is applied once to get a new estimate and then the Secant
method is applied once using the initial guess and this new estimate. The estimated value of the root
after the application of the Secant method is _______________.
Q.28 Consider the following differential equation:
( d + d ) cos
= ( d ? dx) sin
Which of the following is the solution of the above equation (c is an arbitrary constant)?
(A)
cos
= (B)
sin
= (C) cos
= (D) sin
=
Q.29 Consider the following complex function:
f(z) =
9
(z ? 1)(z + 2)
Which of the following is one of the residues of the above function?
(A) ?1 (B) 9/16 (C) 2 (D) 9
Q.30 The directional derivative of the field ( , , ) = ? 3 in the direction of the vector
( ? + ? ? 2 ) at point (2, ?1, 4) is _______________.
Q.31 The composition of an air-entrained concrete is given below:
Water : 184 kg/m
3
Ordinary Portland Cement (OPC) : 368 kg/m
3
Sand : 606 kg/m
3
Coarse aggregate : 1155 kg/m
3
Assume the specific gravity of OPC, sand and coarse aggregate to be 3.14, 2.67 and 2.74,
respectively. The air content is _______________ liters/ m
3
.
GATE 2015 SET-1 CIVIL - CE
CE 7/13
Q.32 A bracket plate connected to a column flange transmits a load of 100 kN as shown in the following
figure. The maximum force for which the bolts should be designed is _______________ kN.
600
100 kN
75 75
75 75
All dimensions are in mm
Q.33 Consider the singly reinforced beam section given below (left figure). The stress block parameters
for the cross-section from IS:456-2000 are also given below (right figure). The moment of
resistance for the given section by the limit state method is _______________ kN-m.
Q.34 For formation of collapse mechanism in the following figure, the minimum value of P
u
is cM
p
/L.
M
p
and 3M
p
denote the plastic moment capacities of beam sections as shown in this figure. The
value of c is _______________.
GATE 2015 SET-1 CIVIL - CE
CE 8/13
Q.35 A tapered circular rod of diameter varying from 20 mm to 10 mm is connected to another uniform
circular rod of diameter 10 mm as shown in the following figure. Both bars are made of same
material with the modulus of elasticity, E = 2x10
5
MPa. When subjected to a load P = 30? kN, the
deflection at point A is _______________ mm.
Q.36 Two beams are connected by a linear spring as shown in the following figure. For a load P as
shown in the figure, the percentage of the applied load P carried by the spring is _______________.
GATE 2015 SET-1 CIVIL - CE
CE 9/13
Q.37 For the 2D truss with the applied loads shown below, the strain energy in the member XY is
_______________ kN-m. For member XY, assume AE = 30 kN, where A is cross-section area and E
is the modulus of elasticity.
Q.38 An earth embankment is to be constructed with compacted cohesionless soil. The volume of the
embankment is 5000 m
3
and the target dry unit weight is 16.2 kN/m
3
. Three nearby sites (see
figure below) have been identified from where the required soil can be transported to the
construction site. The void ratios (e) of different sites are shown in the figure. Assume the
specific gravity of soil to be 2.7 for all three sites. If the cost of transportation per km is twice the
cost of excavation per m
3
of borrow pits, which site would you choose as the most economic
solution? (Use unit weight of water = 10 kN/m
3
)
(A) Site X (B) Site Y (C) Site Z (D) Any of the sites
FirstRanker.com - FirstRanker's Choice
GATE 2015 SET-1 CIVIL - CE
CE 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 For what value of p the following set of equations will have no solution?
2 + 3 = 5
3 + = 10
Q.2
The integral ? with > > 0 is evaluated analytically as well as numerically using a
single application of the trapezoidal rule. If I is the exact value of the integral obtained analytically
and is the approximate value obtained using the trapezoidal rule, which of the following
statements is correct about their relationship?
(A) > (B) <
(C) = (D) Insufficient data to determine the relationship
Q.3 Consider the following probability mass function (p.m.f.) of a random variable X:
( , ) = if = 0
1 ? if = 1
0 otherwise
If q = 0.4, the variance of X is _______________.
Q.4 Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider
the following statements for workability of concrete:
(i) As the slump increases, the Vebe time increases
(ii) As the slump increases, the compaction factor increases
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
Q.5 Consider the following statements for air-entrained concrete:
(i) Air-entrainment reduces the water demand for a given level of workability
(ii) Use of air-entrained concrete is required in environments where cyclic freezing and
thawing is expected
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
GATE 2015 SET-1 CIVIL - CE
CE 2/13
Q.6 Consider the singly reinforced beam shown in the figure below:
X
X
P P
L L L/2
At cross-section XX, which of the following statements is TRUE at the limit state?
(A) The variation of stress is linear and that of strain is non-linear
(B) The variation of strain is linear and that of stress is non-linear
(C) The variation of both stress and strain is linear
(D) The variation of both stress and strain is non-linear
Q.7 For the beam shown below, the stiffness coefficient K
22
can be written as
(A)
(B)
(C)
(D)
Q.8
The development length of a deformed reinforcement bar can be expressed as (1/k) ( ? ?
s
/ ?
bd
).
From the IS:456-2000, the value of can be calculated as _______________.
Q.9 For the beam shown below, the value of the support moment M is _______________ kN-m.
GATE 2015 SET-1 CIVIL - CE
CE 3/13
Q.10 Two triangular wedges are glued together as shown in the following figure. The stress acting
normal to the interface, ?
is _______________ MPa.
Q.11 A fine-grained soil has 60% (by weight) silt content. The soil behaves as semi-solid when water
content is between 15% and 28%. The soil behaves fluid-like when the water content is more than
40%. The ?Activity? of the soil is
(A) 3.33 (B) 0.42 (C) 0.30 (D) 0.20
Q.12 Which of the following statements is TRUE for the relation between discharge velocity and seepage
velocity?
(A) Seepage velocity is always smaller than discharge velocity
(B) Seepage velocity can never be smaller than discharge velocity
(C) Seepage velocity is equal to the discharge velocity
(D) No relation between seepage velocity and discharge velocity can be established
Q.13 Which of the following statements is TRUE for degree of disturbance of collected soil sample?
(A) Thinner the sampler wall, lower the degree of disturbance of collected soil sample
(B) Thicker the sampler wall, lower the degree of disturbance of collected soil sample
(C) Thickness of the sampler wall and the degree of disturbance of collected soil sample are
unrelated
(D) The degree of disturbance of collected soil sample is proportional to the inner diameter of the
sampling tube
Q.14 In an unconsolidated undrained triaxial test, it is observed that an increase in cell pressure from 150
kPa to 250 kPa leads to a pore pressure increase of 80 kPa. It is further observed that, an increase of
50 kPa in deviatoric stress results in an increase of 25 kPa in the pore pressure. The value of
Skempton?s pore pressure parameter B is:
(A) 0.5 (B) 0.625 (C) 0.8 (D) 1.0
Q.15 Which of the following statements is NOT correct?
(A) Loose sand exhibits contractive behavior upon shearing
(B) Dense sand when sheared under undrained condition, may lead to generation of negative
pore pressure
(C) Black cotton soil exhibits expansive behavior
(D) Liquefaction is the phenomenon where cohesionless soil near the downstream side of dams
or sheet-piles loses its shear strength due to high upward hydraulic gradient
GATE 2015 SET-1 CIVIL - CE
CE 4/13
Q.16 In a two-dimensional steady flow field, in a certain region of the x-y plane, the velocity component
in the x-direction is given by = and the density varies as =
. Which of the following is a
valid expression for the velocity component in the y-direction, v
y
?
(A) = ? / (B) = / (C) = ? (D) =
Q.17 For steady incompressible flow through a closed-conduit of uniform cross-section, the direction of
flow will always be:
(A) from higher to lower elevation (B) from higher to lower pressure
(C) from higher to lower velocity (D) from higher to lower piezometric head
Q.18 A circular pipe has a diameter of 1 m, bed slope of 1 in 1000, and Manning?s roughness coefficient
equal to 0.01. It may be treated as an open channel flow when it is flowing just full, i.e., the water
level just touches the crest. The discharge in this condition is denoted by Q
full
. Similarly, the
discharge when the pipe is flowing half-full, i.e., with a flow depth of 0.5 m, is denoted by Q
half
.
The ratio Q
full
/ Q
half
is:
(A) 1
(B) ?2
(C) 2 (D) 4
Q.19
The two columns below show some parameters and their possible values.
Parameter Value
P ? Gross Command Area I ? 100 hectares/cumec
Q ? Permanent Wilting Point II ? 6 ?C
R ? Duty of canal water III ? 1000 hectares
S ? Delta of wheat IV ? 1000 cm
V ? 40 cm
VI ? 0.12
Which of the following options matches the parameters and the values correctly?
(A) P-I, Q-II, R-III, S-IV (B) P-III, Q-VI, R-I, S-V
(C) P-I, Q-V, R-VI, S-II (D) P-III, Q-II, R-V, S-IV
Q.20 Total Kjeldahl Nitrogen (TKN) concentration (mg/L as N) in domestic sewage is the sum of the
concentrations of:
(A) organic and inorganic nitrogen in sewage
(B) organic nitrogen and nitrate in sewage
(C) organic nitrogen and ammonia in sewage
(D) ammonia and nitrate in sewage
Q.21 Solid waste generated from an industry contains only two components, X and Y as shown in the
table below
Component Composition
(% weight)
Density
(kg/m
3
)
X c
1
?
1
Y c
2
?
2
Assuming (c
1
+ c
2
) = 100, the composite density of the solid waste ( ? ? is given by:
(A)
?
?
?
?
?
?
?
?
?
?
?
2
2
1
1
c c
100
(B)
c c
100
2
2
1
1
?
?
?
?
?
?
?
? ?
?
?
(C) ? ?
2 2 1 1
c c 100 ? ? ?
(D)
c c
100
2 2 1 1
2 1
?
?
?
?
?
?
?
?
? ? ?
? ?
GATE 2015 SET-1 CIVIL - CE
CE 5/13
Q.22 The penetration value of a bitumen sample tested at 25?C is 80. When this sample is heated to 60?C
and tested again, the needle of the penetration test apparatus penetrates the bitumen sample by d
mm. The value of d CANNOT be less than _______________ mm.
Q.23 Which of the following statements CANNOT be used to describe free flow speed (u
f
) of a traffic
stream?
(A) u
f
is the speed when flow is negligible
(B) u
f
is the speed when density is negligible
(C) u
f
is affected by geometry and surface conditions of the road
(D) u
f
is the speed at which flow is maximum and density is optimum
Q.24 Which of the following statements is FALSE?
(A) Plumb line is along the direction of gravity
(B) Mean Sea Level (MSL) is used as a reference surface for establishing the horizontal control
(C) Mean Sea Level (MSL) is a simplification of the Geoid
(D) Geoid is an equi-potential surface of gravity
Q.25 In a closed loop traverse of 1 km total length, the closing errors in departure and latitude are 0.3 m
and 0.4 m, respectively. The relative precision of this traverse will be:
(A) 1: 5000 (B) 1: 4000 (C) 1: 3000 (D) 1: 2000
GATE 2015 SET-1 CIVIL - CE
CE 6/13
Q. 26 ? Q. 55 carry two marks each.
Q.26 The smallest and largest Eigen values of the following matrix are:
?
?
?
?
?
?
?
?
?
?
?
?
?
5 3 2
6 4 4
2 2 3
(A) 1.5 and 2.5 (B) 0.5 and 2.5 (C) 1.0 and 3.0 (D) 1.0 and 2.0
Q.27 The quadratic equation ? 4 + 4 = 0 is to be solved numerically, starting with the initial guess
= 3. The Newton-Raphson method is applied once to get a new estimate and then the Secant
method is applied once using the initial guess and this new estimate. The estimated value of the root
after the application of the Secant method is _______________.
Q.28 Consider the following differential equation:
( d + d ) cos
= ( d ? dx) sin
Which of the following is the solution of the above equation (c is an arbitrary constant)?
(A)
cos
= (B)
sin
= (C) cos
= (D) sin
=
Q.29 Consider the following complex function:
f(z) =
9
(z ? 1)(z + 2)
Which of the following is one of the residues of the above function?
(A) ?1 (B) 9/16 (C) 2 (D) 9
Q.30 The directional derivative of the field ( , , ) = ? 3 in the direction of the vector
( ? + ? ? 2 ) at point (2, ?1, 4) is _______________.
Q.31 The composition of an air-entrained concrete is given below:
Water : 184 kg/m
3
Ordinary Portland Cement (OPC) : 368 kg/m
3
Sand : 606 kg/m
3
Coarse aggregate : 1155 kg/m
3
Assume the specific gravity of OPC, sand and coarse aggregate to be 3.14, 2.67 and 2.74,
respectively. The air content is _______________ liters/ m
3
.
GATE 2015 SET-1 CIVIL - CE
CE 7/13
Q.32 A bracket plate connected to a column flange transmits a load of 100 kN as shown in the following
figure. The maximum force for which the bolts should be designed is _______________ kN.
600
100 kN
75 75
75 75
All dimensions are in mm
Q.33 Consider the singly reinforced beam section given below (left figure). The stress block parameters
for the cross-section from IS:456-2000 are also given below (right figure). The moment of
resistance for the given section by the limit state method is _______________ kN-m.
Q.34 For formation of collapse mechanism in the following figure, the minimum value of P
u
is cM
p
/L.
M
p
and 3M
p
denote the plastic moment capacities of beam sections as shown in this figure. The
value of c is _______________.
GATE 2015 SET-1 CIVIL - CE
CE 8/13
Q.35 A tapered circular rod of diameter varying from 20 mm to 10 mm is connected to another uniform
circular rod of diameter 10 mm as shown in the following figure. Both bars are made of same
material with the modulus of elasticity, E = 2x10
5
MPa. When subjected to a load P = 30? kN, the
deflection at point A is _______________ mm.
Q.36 Two beams are connected by a linear spring as shown in the following figure. For a load P as
shown in the figure, the percentage of the applied load P carried by the spring is _______________.
GATE 2015 SET-1 CIVIL - CE
CE 9/13
Q.37 For the 2D truss with the applied loads shown below, the strain energy in the member XY is
_______________ kN-m. For member XY, assume AE = 30 kN, where A is cross-section area and E
is the modulus of elasticity.
Q.38 An earth embankment is to be constructed with compacted cohesionless soil. The volume of the
embankment is 5000 m
3
and the target dry unit weight is 16.2 kN/m
3
. Three nearby sites (see
figure below) have been identified from where the required soil can be transported to the
construction site. The void ratios (e) of different sites are shown in the figure. Assume the
specific gravity of soil to be 2.7 for all three sites. If the cost of transportation per km is twice the
cost of excavation per m
3
of borrow pits, which site would you choose as the most economic
solution? (Use unit weight of water = 10 kN/m
3
)
(A) Site X (B) Site Y (C) Site Z (D) Any of the sites
GATE 2015 SET-1 CIVIL - CE
CE 10/13
Q.39 A water tank is to be constructed on the soil deposit shown in the figure below. A circular footing
of diameter 3 m and depth of embedment 1 m has been designed to support the tank. The total
vertical load to be taken by the footing is 1500 kN. Assume the unit weight of water as 10 kN/m
3
and the load dispersion pattern as 2V:1H. The expected settlement of the tank due to primary
consolidation of the clay layer is _______________ mm.
Q.40
A 20 m thick clay layer is sandwiched between a silty sand layer and a gravelly sand layer. The
layer experiences 30 mm settlement in 2 years.
Given:
= for ? 60%
1.781 ? 0.933log
(100 ? ) for > 60%
where T
v
is the time factor and U is the degree of consolidation in %.
If the coefficient of consolidation of the layer is 0.003 cm
2
/s, the deposit will experience a total of
50 mm settlement in the next _______________ years.
Q.41 A non-homogeneous soil deposit consists of a silt layer sandwiched between a fine-sand layer at
top and a clay layer below. Permeability of the silt layer is 10 times the permeability of the clay
layer and one-tenth of the permeability of the sand layer. Thickness of the silt layer is 2 times the
thickness of the sand layer and two-third of the thickness of the clay layer. The ratio of equivalent
horizontal and equivalent vertical permeability of the deposit is ___________________.
FirstRanker.com - FirstRanker's Choice
GATE 2015 SET-1 CIVIL - CE
CE 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 For what value of p the following set of equations will have no solution?
2 + 3 = 5
3 + = 10
Q.2
The integral ? with > > 0 is evaluated analytically as well as numerically using a
single application of the trapezoidal rule. If I is the exact value of the integral obtained analytically
and is the approximate value obtained using the trapezoidal rule, which of the following
statements is correct about their relationship?
(A) > (B) <
(C) = (D) Insufficient data to determine the relationship
Q.3 Consider the following probability mass function (p.m.f.) of a random variable X:
( , ) = if = 0
1 ? if = 1
0 otherwise
If q = 0.4, the variance of X is _______________.
Q.4 Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider
the following statements for workability of concrete:
(i) As the slump increases, the Vebe time increases
(ii) As the slump increases, the compaction factor increases
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
Q.5 Consider the following statements for air-entrained concrete:
(i) Air-entrainment reduces the water demand for a given level of workability
(ii) Use of air-entrained concrete is required in environments where cyclic freezing and
thawing is expected
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
GATE 2015 SET-1 CIVIL - CE
CE 2/13
Q.6 Consider the singly reinforced beam shown in the figure below:
X
X
P P
L L L/2
At cross-section XX, which of the following statements is TRUE at the limit state?
(A) The variation of stress is linear and that of strain is non-linear
(B) The variation of strain is linear and that of stress is non-linear
(C) The variation of both stress and strain is linear
(D) The variation of both stress and strain is non-linear
Q.7 For the beam shown below, the stiffness coefficient K
22
can be written as
(A)
(B)
(C)
(D)
Q.8
The development length of a deformed reinforcement bar can be expressed as (1/k) ( ? ?
s
/ ?
bd
).
From the IS:456-2000, the value of can be calculated as _______________.
Q.9 For the beam shown below, the value of the support moment M is _______________ kN-m.
GATE 2015 SET-1 CIVIL - CE
CE 3/13
Q.10 Two triangular wedges are glued together as shown in the following figure. The stress acting
normal to the interface, ?
is _______________ MPa.
Q.11 A fine-grained soil has 60% (by weight) silt content. The soil behaves as semi-solid when water
content is between 15% and 28%. The soil behaves fluid-like when the water content is more than
40%. The ?Activity? of the soil is
(A) 3.33 (B) 0.42 (C) 0.30 (D) 0.20
Q.12 Which of the following statements is TRUE for the relation between discharge velocity and seepage
velocity?
(A) Seepage velocity is always smaller than discharge velocity
(B) Seepage velocity can never be smaller than discharge velocity
(C) Seepage velocity is equal to the discharge velocity
(D) No relation between seepage velocity and discharge velocity can be established
Q.13 Which of the following statements is TRUE for degree of disturbance of collected soil sample?
(A) Thinner the sampler wall, lower the degree of disturbance of collected soil sample
(B) Thicker the sampler wall, lower the degree of disturbance of collected soil sample
(C) Thickness of the sampler wall and the degree of disturbance of collected soil sample are
unrelated
(D) The degree of disturbance of collected soil sample is proportional to the inner diameter of the
sampling tube
Q.14 In an unconsolidated undrained triaxial test, it is observed that an increase in cell pressure from 150
kPa to 250 kPa leads to a pore pressure increase of 80 kPa. It is further observed that, an increase of
50 kPa in deviatoric stress results in an increase of 25 kPa in the pore pressure. The value of
Skempton?s pore pressure parameter B is:
(A) 0.5 (B) 0.625 (C) 0.8 (D) 1.0
Q.15 Which of the following statements is NOT correct?
(A) Loose sand exhibits contractive behavior upon shearing
(B) Dense sand when sheared under undrained condition, may lead to generation of negative
pore pressure
(C) Black cotton soil exhibits expansive behavior
(D) Liquefaction is the phenomenon where cohesionless soil near the downstream side of dams
or sheet-piles loses its shear strength due to high upward hydraulic gradient
GATE 2015 SET-1 CIVIL - CE
CE 4/13
Q.16 In a two-dimensional steady flow field, in a certain region of the x-y plane, the velocity component
in the x-direction is given by = and the density varies as =
. Which of the following is a
valid expression for the velocity component in the y-direction, v
y
?
(A) = ? / (B) = / (C) = ? (D) =
Q.17 For steady incompressible flow through a closed-conduit of uniform cross-section, the direction of
flow will always be:
(A) from higher to lower elevation (B) from higher to lower pressure
(C) from higher to lower velocity (D) from higher to lower piezometric head
Q.18 A circular pipe has a diameter of 1 m, bed slope of 1 in 1000, and Manning?s roughness coefficient
equal to 0.01. It may be treated as an open channel flow when it is flowing just full, i.e., the water
level just touches the crest. The discharge in this condition is denoted by Q
full
. Similarly, the
discharge when the pipe is flowing half-full, i.e., with a flow depth of 0.5 m, is denoted by Q
half
.
The ratio Q
full
/ Q
half
is:
(A) 1
(B) ?2
(C) 2 (D) 4
Q.19
The two columns below show some parameters and their possible values.
Parameter Value
P ? Gross Command Area I ? 100 hectares/cumec
Q ? Permanent Wilting Point II ? 6 ?C
R ? Duty of canal water III ? 1000 hectares
S ? Delta of wheat IV ? 1000 cm
V ? 40 cm
VI ? 0.12
Which of the following options matches the parameters and the values correctly?
(A) P-I, Q-II, R-III, S-IV (B) P-III, Q-VI, R-I, S-V
(C) P-I, Q-V, R-VI, S-II (D) P-III, Q-II, R-V, S-IV
Q.20 Total Kjeldahl Nitrogen (TKN) concentration (mg/L as N) in domestic sewage is the sum of the
concentrations of:
(A) organic and inorganic nitrogen in sewage
(B) organic nitrogen and nitrate in sewage
(C) organic nitrogen and ammonia in sewage
(D) ammonia and nitrate in sewage
Q.21 Solid waste generated from an industry contains only two components, X and Y as shown in the
table below
Component Composition
(% weight)
Density
(kg/m
3
)
X c
1
?
1
Y c
2
?
2
Assuming (c
1
+ c
2
) = 100, the composite density of the solid waste ( ? ? is given by:
(A)
?
?
?
?
?
?
?
?
?
?
?
2
2
1
1
c c
100
(B)
c c
100
2
2
1
1
?
?
?
?
?
?
?
? ?
?
?
(C) ? ?
2 2 1 1
c c 100 ? ? ?
(D)
c c
100
2 2 1 1
2 1
?
?
?
?
?
?
?
?
? ? ?
? ?
GATE 2015 SET-1 CIVIL - CE
CE 5/13
Q.22 The penetration value of a bitumen sample tested at 25?C is 80. When this sample is heated to 60?C
and tested again, the needle of the penetration test apparatus penetrates the bitumen sample by d
mm. The value of d CANNOT be less than _______________ mm.
Q.23 Which of the following statements CANNOT be used to describe free flow speed (u
f
) of a traffic
stream?
(A) u
f
is the speed when flow is negligible
(B) u
f
is the speed when density is negligible
(C) u
f
is affected by geometry and surface conditions of the road
(D) u
f
is the speed at which flow is maximum and density is optimum
Q.24 Which of the following statements is FALSE?
(A) Plumb line is along the direction of gravity
(B) Mean Sea Level (MSL) is used as a reference surface for establishing the horizontal control
(C) Mean Sea Level (MSL) is a simplification of the Geoid
(D) Geoid is an equi-potential surface of gravity
Q.25 In a closed loop traverse of 1 km total length, the closing errors in departure and latitude are 0.3 m
and 0.4 m, respectively. The relative precision of this traverse will be:
(A) 1: 5000 (B) 1: 4000 (C) 1: 3000 (D) 1: 2000
GATE 2015 SET-1 CIVIL - CE
CE 6/13
Q. 26 ? Q. 55 carry two marks each.
Q.26 The smallest and largest Eigen values of the following matrix are:
?
?
?
?
?
?
?
?
?
?
?
?
?
5 3 2
6 4 4
2 2 3
(A) 1.5 and 2.5 (B) 0.5 and 2.5 (C) 1.0 and 3.0 (D) 1.0 and 2.0
Q.27 The quadratic equation ? 4 + 4 = 0 is to be solved numerically, starting with the initial guess
= 3. The Newton-Raphson method is applied once to get a new estimate and then the Secant
method is applied once using the initial guess and this new estimate. The estimated value of the root
after the application of the Secant method is _______________.
Q.28 Consider the following differential equation:
( d + d ) cos
= ( d ? dx) sin
Which of the following is the solution of the above equation (c is an arbitrary constant)?
(A)
cos
= (B)
sin
= (C) cos
= (D) sin
=
Q.29 Consider the following complex function:
f(z) =
9
(z ? 1)(z + 2)
Which of the following is one of the residues of the above function?
(A) ?1 (B) 9/16 (C) 2 (D) 9
Q.30 The directional derivative of the field ( , , ) = ? 3 in the direction of the vector
( ? + ? ? 2 ) at point (2, ?1, 4) is _______________.
Q.31 The composition of an air-entrained concrete is given below:
Water : 184 kg/m
3
Ordinary Portland Cement (OPC) : 368 kg/m
3
Sand : 606 kg/m
3
Coarse aggregate : 1155 kg/m
3
Assume the specific gravity of OPC, sand and coarse aggregate to be 3.14, 2.67 and 2.74,
respectively. The air content is _______________ liters/ m
3
.
GATE 2015 SET-1 CIVIL - CE
CE 7/13
Q.32 A bracket plate connected to a column flange transmits a load of 100 kN as shown in the following
figure. The maximum force for which the bolts should be designed is _______________ kN.
600
100 kN
75 75
75 75
All dimensions are in mm
Q.33 Consider the singly reinforced beam section given below (left figure). The stress block parameters
for the cross-section from IS:456-2000 are also given below (right figure). The moment of
resistance for the given section by the limit state method is _______________ kN-m.
Q.34 For formation of collapse mechanism in the following figure, the minimum value of P
u
is cM
p
/L.
M
p
and 3M
p
denote the plastic moment capacities of beam sections as shown in this figure. The
value of c is _______________.
GATE 2015 SET-1 CIVIL - CE
CE 8/13
Q.35 A tapered circular rod of diameter varying from 20 mm to 10 mm is connected to another uniform
circular rod of diameter 10 mm as shown in the following figure. Both bars are made of same
material with the modulus of elasticity, E = 2x10
5
MPa. When subjected to a load P = 30? kN, the
deflection at point A is _______________ mm.
Q.36 Two beams are connected by a linear spring as shown in the following figure. For a load P as
shown in the figure, the percentage of the applied load P carried by the spring is _______________.
GATE 2015 SET-1 CIVIL - CE
CE 9/13
Q.37 For the 2D truss with the applied loads shown below, the strain energy in the member XY is
_______________ kN-m. For member XY, assume AE = 30 kN, where A is cross-section area and E
is the modulus of elasticity.
Q.38 An earth embankment is to be constructed with compacted cohesionless soil. The volume of the
embankment is 5000 m
3
and the target dry unit weight is 16.2 kN/m
3
. Three nearby sites (see
figure below) have been identified from where the required soil can be transported to the
construction site. The void ratios (e) of different sites are shown in the figure. Assume the
specific gravity of soil to be 2.7 for all three sites. If the cost of transportation per km is twice the
cost of excavation per m
3
of borrow pits, which site would you choose as the most economic
solution? (Use unit weight of water = 10 kN/m
3
)
(A) Site X (B) Site Y (C) Site Z (D) Any of the sites
GATE 2015 SET-1 CIVIL - CE
CE 10/13
Q.39 A water tank is to be constructed on the soil deposit shown in the figure below. A circular footing
of diameter 3 m and depth of embedment 1 m has been designed to support the tank. The total
vertical load to be taken by the footing is 1500 kN. Assume the unit weight of water as 10 kN/m
3
and the load dispersion pattern as 2V:1H. The expected settlement of the tank due to primary
consolidation of the clay layer is _______________ mm.
Q.40
A 20 m thick clay layer is sandwiched between a silty sand layer and a gravelly sand layer. The
layer experiences 30 mm settlement in 2 years.
Given:
= for ? 60%
1.781 ? 0.933log
(100 ? ) for > 60%
where T
v
is the time factor and U is the degree of consolidation in %.
If the coefficient of consolidation of the layer is 0.003 cm
2
/s, the deposit will experience a total of
50 mm settlement in the next _______________ years.
Q.41 A non-homogeneous soil deposit consists of a silt layer sandwiched between a fine-sand layer at
top and a clay layer below. Permeability of the silt layer is 10 times the permeability of the clay
layer and one-tenth of the permeability of the sand layer. Thickness of the silt layer is 2 times the
thickness of the sand layer and two-third of the thickness of the clay layer. The ratio of equivalent
horizontal and equivalent vertical permeability of the deposit is ___________________.
GATE 2015 SET-1 CIVIL - CE
CE 11/13
Q.42 A square footing (2 m x 2 m) is subjected to an inclined point load, P as shown in the figure below.
The water table is located well below the base of the footing. Considering one-way eccentricity, the
net safe load carrying capacity of the footing for a factor of safety of 3.0 is _______________ kN.
The following factors may be used:
Bearing capacity factors: N
q
= 33.3, N
?
? ? ? ? ? ? ? ? ??Shape factors: F
qs
= F
?s
= 1.314; Depth factors: F
qd
= F
?d
= 1.113; Inclination factors: F
qi
= 0.444, F
?i
= 0.02
Q.43 Two reservoirs are connected through a 930 m long, 0.3 m diameter pipe, which has a gate valve.
The pipe entrance is sharp (loss coefficient = 0.5) and the valve is half-open (loss coefficient = 5.5).
The head difference between the two reservoirs is 20 m. Assume the friction factor for the pipe as
0.03 and g =10 m/s
2
. The discharge in the pipe accounting for all minor and major losses is
_______________ m
3
/s.
Q.44 A hydraulic jump is formed in a 2 m wide rectangular channel which is horizontal and frictionless.
The post-jump depth and velocity are 0.8 m and 1 m/s, respectively. The pre-jump velocity is
_______________ m/s. (use g = 10 m/s
2
)
Q.45 A short reach of a 2 m wide rectangular open channel has its bed level rising in the direction of
flow at a slope of 1 in 10000. It carries a discharge of 4 m
3
/s and its Manning?s roughness
coefficient is 0.01. The flow in this reach is gradually varying. At a certain section in this reach, the
depth of flow was measured as 0.5 m. The rate of change of the water depth with distance, dy/dx, at
this section is _______________ (use g = 10 m/s
2
).
Q.46 The drag force, F
D
, on a sphere kept in a uniform flow field depends on the diameter of the sphere,
D; flow velocity, V; fluid density, ?; and dynamic viscosity, ?. Which of the following options
represents the non-dimensional parameters which could be used to analyze this problem?
(A)
and
(B)
and
(C)
and
(D)
and
FirstRanker.com - FirstRanker's Choice
GATE 2015 SET-1 CIVIL - CE
CE 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 For what value of p the following set of equations will have no solution?
2 + 3 = 5
3 + = 10
Q.2
The integral ? with > > 0 is evaluated analytically as well as numerically using a
single application of the trapezoidal rule. If I is the exact value of the integral obtained analytically
and is the approximate value obtained using the trapezoidal rule, which of the following
statements is correct about their relationship?
(A) > (B) <
(C) = (D) Insufficient data to determine the relationship
Q.3 Consider the following probability mass function (p.m.f.) of a random variable X:
( , ) = if = 0
1 ? if = 1
0 otherwise
If q = 0.4, the variance of X is _______________.
Q.4 Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider
the following statements for workability of concrete:
(i) As the slump increases, the Vebe time increases
(ii) As the slump increases, the compaction factor increases
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
Q.5 Consider the following statements for air-entrained concrete:
(i) Air-entrainment reduces the water demand for a given level of workability
(ii) Use of air-entrained concrete is required in environments where cyclic freezing and
thawing is expected
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
GATE 2015 SET-1 CIVIL - CE
CE 2/13
Q.6 Consider the singly reinforced beam shown in the figure below:
X
X
P P
L L L/2
At cross-section XX, which of the following statements is TRUE at the limit state?
(A) The variation of stress is linear and that of strain is non-linear
(B) The variation of strain is linear and that of stress is non-linear
(C) The variation of both stress and strain is linear
(D) The variation of both stress and strain is non-linear
Q.7 For the beam shown below, the stiffness coefficient K
22
can be written as
(A)
(B)
(C)
(D)
Q.8
The development length of a deformed reinforcement bar can be expressed as (1/k) ( ? ?
s
/ ?
bd
).
From the IS:456-2000, the value of can be calculated as _______________.
Q.9 For the beam shown below, the value of the support moment M is _______________ kN-m.
GATE 2015 SET-1 CIVIL - CE
CE 3/13
Q.10 Two triangular wedges are glued together as shown in the following figure. The stress acting
normal to the interface, ?
is _______________ MPa.
Q.11 A fine-grained soil has 60% (by weight) silt content. The soil behaves as semi-solid when water
content is between 15% and 28%. The soil behaves fluid-like when the water content is more than
40%. The ?Activity? of the soil is
(A) 3.33 (B) 0.42 (C) 0.30 (D) 0.20
Q.12 Which of the following statements is TRUE for the relation between discharge velocity and seepage
velocity?
(A) Seepage velocity is always smaller than discharge velocity
(B) Seepage velocity can never be smaller than discharge velocity
(C) Seepage velocity is equal to the discharge velocity
(D) No relation between seepage velocity and discharge velocity can be established
Q.13 Which of the following statements is TRUE for degree of disturbance of collected soil sample?
(A) Thinner the sampler wall, lower the degree of disturbance of collected soil sample
(B) Thicker the sampler wall, lower the degree of disturbance of collected soil sample
(C) Thickness of the sampler wall and the degree of disturbance of collected soil sample are
unrelated
(D) The degree of disturbance of collected soil sample is proportional to the inner diameter of the
sampling tube
Q.14 In an unconsolidated undrained triaxial test, it is observed that an increase in cell pressure from 150
kPa to 250 kPa leads to a pore pressure increase of 80 kPa. It is further observed that, an increase of
50 kPa in deviatoric stress results in an increase of 25 kPa in the pore pressure. The value of
Skempton?s pore pressure parameter B is:
(A) 0.5 (B) 0.625 (C) 0.8 (D) 1.0
Q.15 Which of the following statements is NOT correct?
(A) Loose sand exhibits contractive behavior upon shearing
(B) Dense sand when sheared under undrained condition, may lead to generation of negative
pore pressure
(C) Black cotton soil exhibits expansive behavior
(D) Liquefaction is the phenomenon where cohesionless soil near the downstream side of dams
or sheet-piles loses its shear strength due to high upward hydraulic gradient
GATE 2015 SET-1 CIVIL - CE
CE 4/13
Q.16 In a two-dimensional steady flow field, in a certain region of the x-y plane, the velocity component
in the x-direction is given by = and the density varies as =
. Which of the following is a
valid expression for the velocity component in the y-direction, v
y
?
(A) = ? / (B) = / (C) = ? (D) =
Q.17 For steady incompressible flow through a closed-conduit of uniform cross-section, the direction of
flow will always be:
(A) from higher to lower elevation (B) from higher to lower pressure
(C) from higher to lower velocity (D) from higher to lower piezometric head
Q.18 A circular pipe has a diameter of 1 m, bed slope of 1 in 1000, and Manning?s roughness coefficient
equal to 0.01. It may be treated as an open channel flow when it is flowing just full, i.e., the water
level just touches the crest. The discharge in this condition is denoted by Q
full
. Similarly, the
discharge when the pipe is flowing half-full, i.e., with a flow depth of 0.5 m, is denoted by Q
half
.
The ratio Q
full
/ Q
half
is:
(A) 1
(B) ?2
(C) 2 (D) 4
Q.19
The two columns below show some parameters and their possible values.
Parameter Value
P ? Gross Command Area I ? 100 hectares/cumec
Q ? Permanent Wilting Point II ? 6 ?C
R ? Duty of canal water III ? 1000 hectares
S ? Delta of wheat IV ? 1000 cm
V ? 40 cm
VI ? 0.12
Which of the following options matches the parameters and the values correctly?
(A) P-I, Q-II, R-III, S-IV (B) P-III, Q-VI, R-I, S-V
(C) P-I, Q-V, R-VI, S-II (D) P-III, Q-II, R-V, S-IV
Q.20 Total Kjeldahl Nitrogen (TKN) concentration (mg/L as N) in domestic sewage is the sum of the
concentrations of:
(A) organic and inorganic nitrogen in sewage
(B) organic nitrogen and nitrate in sewage
(C) organic nitrogen and ammonia in sewage
(D) ammonia and nitrate in sewage
Q.21 Solid waste generated from an industry contains only two components, X and Y as shown in the
table below
Component Composition
(% weight)
Density
(kg/m
3
)
X c
1
?
1
Y c
2
?
2
Assuming (c
1
+ c
2
) = 100, the composite density of the solid waste ( ? ? is given by:
(A)
?
?
?
?
?
?
?
?
?
?
?
2
2
1
1
c c
100
(B)
c c
100
2
2
1
1
?
?
?
?
?
?
?
? ?
?
?
(C) ? ?
2 2 1 1
c c 100 ? ? ?
(D)
c c
100
2 2 1 1
2 1
?
?
?
?
?
?
?
?
? ? ?
? ?
GATE 2015 SET-1 CIVIL - CE
CE 5/13
Q.22 The penetration value of a bitumen sample tested at 25?C is 80. When this sample is heated to 60?C
and tested again, the needle of the penetration test apparatus penetrates the bitumen sample by d
mm. The value of d CANNOT be less than _______________ mm.
Q.23 Which of the following statements CANNOT be used to describe free flow speed (u
f
) of a traffic
stream?
(A) u
f
is the speed when flow is negligible
(B) u
f
is the speed when density is negligible
(C) u
f
is affected by geometry and surface conditions of the road
(D) u
f
is the speed at which flow is maximum and density is optimum
Q.24 Which of the following statements is FALSE?
(A) Plumb line is along the direction of gravity
(B) Mean Sea Level (MSL) is used as a reference surface for establishing the horizontal control
(C) Mean Sea Level (MSL) is a simplification of the Geoid
(D) Geoid is an equi-potential surface of gravity
Q.25 In a closed loop traverse of 1 km total length, the closing errors in departure and latitude are 0.3 m
and 0.4 m, respectively. The relative precision of this traverse will be:
(A) 1: 5000 (B) 1: 4000 (C) 1: 3000 (D) 1: 2000
GATE 2015 SET-1 CIVIL - CE
CE 6/13
Q. 26 ? Q. 55 carry two marks each.
Q.26 The smallest and largest Eigen values of the following matrix are:
?
?
?
?
?
?
?
?
?
?
?
?
?
5 3 2
6 4 4
2 2 3
(A) 1.5 and 2.5 (B) 0.5 and 2.5 (C) 1.0 and 3.0 (D) 1.0 and 2.0
Q.27 The quadratic equation ? 4 + 4 = 0 is to be solved numerically, starting with the initial guess
= 3. The Newton-Raphson method is applied once to get a new estimate and then the Secant
method is applied once using the initial guess and this new estimate. The estimated value of the root
after the application of the Secant method is _______________.
Q.28 Consider the following differential equation:
( d + d ) cos
= ( d ? dx) sin
Which of the following is the solution of the above equation (c is an arbitrary constant)?
(A)
cos
= (B)
sin
= (C) cos
= (D) sin
=
Q.29 Consider the following complex function:
f(z) =
9
(z ? 1)(z + 2)
Which of the following is one of the residues of the above function?
(A) ?1 (B) 9/16 (C) 2 (D) 9
Q.30 The directional derivative of the field ( , , ) = ? 3 in the direction of the vector
( ? + ? ? 2 ) at point (2, ?1, 4) is _______________.
Q.31 The composition of an air-entrained concrete is given below:
Water : 184 kg/m
3
Ordinary Portland Cement (OPC) : 368 kg/m
3
Sand : 606 kg/m
3
Coarse aggregate : 1155 kg/m
3
Assume the specific gravity of OPC, sand and coarse aggregate to be 3.14, 2.67 and 2.74,
respectively. The air content is _______________ liters/ m
3
.
GATE 2015 SET-1 CIVIL - CE
CE 7/13
Q.32 A bracket plate connected to a column flange transmits a load of 100 kN as shown in the following
figure. The maximum force for which the bolts should be designed is _______________ kN.
600
100 kN
75 75
75 75
All dimensions are in mm
Q.33 Consider the singly reinforced beam section given below (left figure). The stress block parameters
for the cross-section from IS:456-2000 are also given below (right figure). The moment of
resistance for the given section by the limit state method is _______________ kN-m.
Q.34 For formation of collapse mechanism in the following figure, the minimum value of P
u
is cM
p
/L.
M
p
and 3M
p
denote the plastic moment capacities of beam sections as shown in this figure. The
value of c is _______________.
GATE 2015 SET-1 CIVIL - CE
CE 8/13
Q.35 A tapered circular rod of diameter varying from 20 mm to 10 mm is connected to another uniform
circular rod of diameter 10 mm as shown in the following figure. Both bars are made of same
material with the modulus of elasticity, E = 2x10
5
MPa. When subjected to a load P = 30? kN, the
deflection at point A is _______________ mm.
Q.36 Two beams are connected by a linear spring as shown in the following figure. For a load P as
shown in the figure, the percentage of the applied load P carried by the spring is _______________.
GATE 2015 SET-1 CIVIL - CE
CE 9/13
Q.37 For the 2D truss with the applied loads shown below, the strain energy in the member XY is
_______________ kN-m. For member XY, assume AE = 30 kN, where A is cross-section area and E
is the modulus of elasticity.
Q.38 An earth embankment is to be constructed with compacted cohesionless soil. The volume of the
embankment is 5000 m
3
and the target dry unit weight is 16.2 kN/m
3
. Three nearby sites (see
figure below) have been identified from where the required soil can be transported to the
construction site. The void ratios (e) of different sites are shown in the figure. Assume the
specific gravity of soil to be 2.7 for all three sites. If the cost of transportation per km is twice the
cost of excavation per m
3
of borrow pits, which site would you choose as the most economic
solution? (Use unit weight of water = 10 kN/m
3
)
(A) Site X (B) Site Y (C) Site Z (D) Any of the sites
GATE 2015 SET-1 CIVIL - CE
CE 10/13
Q.39 A water tank is to be constructed on the soil deposit shown in the figure below. A circular footing
of diameter 3 m and depth of embedment 1 m has been designed to support the tank. The total
vertical load to be taken by the footing is 1500 kN. Assume the unit weight of water as 10 kN/m
3
and the load dispersion pattern as 2V:1H. The expected settlement of the tank due to primary
consolidation of the clay layer is _______________ mm.
Q.40
A 20 m thick clay layer is sandwiched between a silty sand layer and a gravelly sand layer. The
layer experiences 30 mm settlement in 2 years.
Given:
= for ? 60%
1.781 ? 0.933log
(100 ? ) for > 60%
where T
v
is the time factor and U is the degree of consolidation in %.
If the coefficient of consolidation of the layer is 0.003 cm
2
/s, the deposit will experience a total of
50 mm settlement in the next _______________ years.
Q.41 A non-homogeneous soil deposit consists of a silt layer sandwiched between a fine-sand layer at
top and a clay layer below. Permeability of the silt layer is 10 times the permeability of the clay
layer and one-tenth of the permeability of the sand layer. Thickness of the silt layer is 2 times the
thickness of the sand layer and two-third of the thickness of the clay layer. The ratio of equivalent
horizontal and equivalent vertical permeability of the deposit is ___________________.
GATE 2015 SET-1 CIVIL - CE
CE 11/13
Q.42 A square footing (2 m x 2 m) is subjected to an inclined point load, P as shown in the figure below.
The water table is located well below the base of the footing. Considering one-way eccentricity, the
net safe load carrying capacity of the footing for a factor of safety of 3.0 is _______________ kN.
The following factors may be used:
Bearing capacity factors: N
q
= 33.3, N
?
? ? ? ? ? ? ? ? ??Shape factors: F
qs
= F
?s
= 1.314; Depth factors: F
qd
= F
?d
= 1.113; Inclination factors: F
qi
= 0.444, F
?i
= 0.02
Q.43 Two reservoirs are connected through a 930 m long, 0.3 m diameter pipe, which has a gate valve.
The pipe entrance is sharp (loss coefficient = 0.5) and the valve is half-open (loss coefficient = 5.5).
The head difference between the two reservoirs is 20 m. Assume the friction factor for the pipe as
0.03 and g =10 m/s
2
. The discharge in the pipe accounting for all minor and major losses is
_______________ m
3
/s.
Q.44 A hydraulic jump is formed in a 2 m wide rectangular channel which is horizontal and frictionless.
The post-jump depth and velocity are 0.8 m and 1 m/s, respectively. The pre-jump velocity is
_______________ m/s. (use g = 10 m/s
2
)
Q.45 A short reach of a 2 m wide rectangular open channel has its bed level rising in the direction of
flow at a slope of 1 in 10000. It carries a discharge of 4 m
3
/s and its Manning?s roughness
coefficient is 0.01. The flow in this reach is gradually varying. At a certain section in this reach, the
depth of flow was measured as 0.5 m. The rate of change of the water depth with distance, dy/dx, at
this section is _______________ (use g = 10 m/s
2
).
Q.46 The drag force, F
D
, on a sphere kept in a uniform flow field depends on the diameter of the sphere,
D; flow velocity, V; fluid density, ?; and dynamic viscosity, ?. Which of the following options
represents the non-dimensional parameters which could be used to analyze this problem?
(A)
and
(B)
and
(C)
and
(D)
and
GATE 2015 SET-1 CIVIL - CE
CE 12/13
Q.47 In a catchment, there are four rain-gauge stations, P, Q, R, and S. Normal annual precipitation
values at these stations are 780 mm, 850 mm, 920 mm, and 980 mm, respectively. In the year 2013,
stations Q, R, and S, were operative but P was not. Using the normal ratio method, the precipitation
at station P for the year 2013 has been estimated as 860 mm. If the observed precipitation at
stations Q and R for the year 2013 were 930 mm and 1010 mm, respectively; what was the
observed precipitation (in mm) at station S for that year?
Q.48 The 4-hr unit hydrograph for a catchment is given in the table below. What would be the maximum
ordinate of the S-curve (in m
3
/s) derived from this hydrograph?
Time (hr) 0 2 4 6 8 10 12 14 16 18 20 22 24
Unit hydrograph
ordinate (m
3
/s)
0 0.6 3.1 10 13 9 5 2 0.7 0.3 0.2 0.1 0
Q.49 The concentration of Sulfur Dioxide (SO
2
) in ambient atmosphere was measured as 30 ?g/m
3
.
Under the same conditions, the above SO
2
concentration expressed in ppm is _______________.
Given: P/(RT) = 6 . 41 mol/m
3
; where, P = Pressure; T = Temperature; R = universal gas constant;
Molecular weight of SO
2
= 64.
Q.50 Consider a primary sedimentation tank (PST) in a water treatment plant with Surface Overflow
Rate (SOR) of 40 m
3
/m
2
/d. The diameter of the spherical particle which will have 90 percent
theoretical removal efficiency in this tank is _______________ ?m. Assume that settling velocity
of the particles in water is described by Stokes?s Law.
Given: Density of water = 1000 kg/m
3
; Density of particle = 2650 kg/m
3
; g = 9.81 m/s
2
; Kinematic
viscosity of water ( ? ? ?= 1.10 x 10
-6
m
2
/s
Q.51 The acceleration-time relationship for a vehicle subjected to non-uniform acceleration is,
= ( ? )
where, v is the speed in m/s, t is the time in s, and are parameters, and v
0
is the initial speed in
m/s. If the accelerating behavior of a vehicle, whose driver intends to overtake a slow moving
vehicle ahead, is described as,
= ( ? )
Considering ? = 2 m/s
2
, ? = 0.05 s
?1
and
= 1.3 m/s
at t = 3 s, the distance (in m) travelled by
the vehicle in 35 s is ______________.
Q.52 On a circular curve, the rate of superelevation is e. While negotiating the curve a vehicle comes to a
stop. It is seen that the stopped vehicle does not slide inwards (in the radial direction). The
coefficient of side friction is f. Which of the following is true:
(A) e ? f (B) f < e < 2 f (C) e ? 2f (D) none of the above
FirstRanker.com - FirstRanker's Choice
GATE 2015 SET-1 CIVIL - CE
CE 1/13
Q. 1 ? Q. 25 carry one mark each.
Q.1 For what value of p the following set of equations will have no solution?
2 + 3 = 5
3 + = 10
Q.2
The integral ? with > > 0 is evaluated analytically as well as numerically using a
single application of the trapezoidal rule. If I is the exact value of the integral obtained analytically
and is the approximate value obtained using the trapezoidal rule, which of the following
statements is correct about their relationship?
(A) > (B) <
(C) = (D) Insufficient data to determine the relationship
Q.3 Consider the following probability mass function (p.m.f.) of a random variable X:
( , ) = if = 0
1 ? if = 1
0 otherwise
If q = 0.4, the variance of X is _______________.
Q.4 Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider
the following statements for workability of concrete:
(i) As the slump increases, the Vebe time increases
(ii) As the slump increases, the compaction factor increases
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
Q.5 Consider the following statements for air-entrained concrete:
(i) Air-entrainment reduces the water demand for a given level of workability
(ii) Use of air-entrained concrete is required in environments where cyclic freezing and
thawing is expected
Which of the following is TRUE?
(A) Both (i) and (ii) are True (B) Both (i) and (ii) are False
(C) (i) is True and (ii) is False (D) (i) is False and (ii) is True
GATE 2015 SET-1 CIVIL - CE
CE 2/13
Q.6 Consider the singly reinforced beam shown in the figure below:
X
X
P P
L L L/2
At cross-section XX, which of the following statements is TRUE at the limit state?
(A) The variation of stress is linear and that of strain is non-linear
(B) The variation of strain is linear and that of stress is non-linear
(C) The variation of both stress and strain is linear
(D) The variation of both stress and strain is non-linear
Q.7 For the beam shown below, the stiffness coefficient K
22
can be written as
(A)
(B)
(C)
(D)
Q.8
The development length of a deformed reinforcement bar can be expressed as (1/k) ( ? ?
s
/ ?
bd
).
From the IS:456-2000, the value of can be calculated as _______________.
Q.9 For the beam shown below, the value of the support moment M is _______________ kN-m.
GATE 2015 SET-1 CIVIL - CE
CE 3/13
Q.10 Two triangular wedges are glued together as shown in the following figure. The stress acting
normal to the interface, ?
is _______________ MPa.
Q.11 A fine-grained soil has 60% (by weight) silt content. The soil behaves as semi-solid when water
content is between 15% and 28%. The soil behaves fluid-like when the water content is more than
40%. The ?Activity? of the soil is
(A) 3.33 (B) 0.42 (C) 0.30 (D) 0.20
Q.12 Which of the following statements is TRUE for the relation between discharge velocity and seepage
velocity?
(A) Seepage velocity is always smaller than discharge velocity
(B) Seepage velocity can never be smaller than discharge velocity
(C) Seepage velocity is equal to the discharge velocity
(D) No relation between seepage velocity and discharge velocity can be established
Q.13 Which of the following statements is TRUE for degree of disturbance of collected soil sample?
(A) Thinner the sampler wall, lower the degree of disturbance of collected soil sample
(B) Thicker the sampler wall, lower the degree of disturbance of collected soil sample
(C) Thickness of the sampler wall and the degree of disturbance of collected soil sample are
unrelated
(D) The degree of disturbance of collected soil sample is proportional to the inner diameter of the
sampling tube
Q.14 In an unconsolidated undrained triaxial test, it is observed that an increase in cell pressure from 150
kPa to 250 kPa leads to a pore pressure increase of 80 kPa. It is further observed that, an increase of
50 kPa in deviatoric stress results in an increase of 25 kPa in the pore pressure. The value of
Skempton?s pore pressure parameter B is:
(A) 0.5 (B) 0.625 (C) 0.8 (D) 1.0
Q.15 Which of the following statements is NOT correct?
(A) Loose sand exhibits contractive behavior upon shearing
(B) Dense sand when sheared under undrained condition, may lead to generation of negative
pore pressure
(C) Black cotton soil exhibits expansive behavior
(D) Liquefaction is the phenomenon where cohesionless soil near the downstream side of dams
or sheet-piles loses its shear strength due to high upward hydraulic gradient
GATE 2015 SET-1 CIVIL - CE
CE 4/13
Q.16 In a two-dimensional steady flow field, in a certain region of the x-y plane, the velocity component
in the x-direction is given by = and the density varies as =
. Which of the following is a
valid expression for the velocity component in the y-direction, v
y
?
(A) = ? / (B) = / (C) = ? (D) =
Q.17 For steady incompressible flow through a closed-conduit of uniform cross-section, the direction of
flow will always be:
(A) from higher to lower elevation (B) from higher to lower pressure
(C) from higher to lower velocity (D) from higher to lower piezometric head
Q.18 A circular pipe has a diameter of 1 m, bed slope of 1 in 1000, and Manning?s roughness coefficient
equal to 0.01. It may be treated as an open channel flow when it is flowing just full, i.e., the water
level just touches the crest. The discharge in this condition is denoted by Q
full
. Similarly, the
discharge when the pipe is flowing half-full, i.e., with a flow depth of 0.5 m, is denoted by Q
half
.
The ratio Q
full
/ Q
half
is:
(A) 1
(B) ?2
(C) 2 (D) 4
Q.19
The two columns below show some parameters and their possible values.
Parameter Value
P ? Gross Command Area I ? 100 hectares/cumec
Q ? Permanent Wilting Point II ? 6 ?C
R ? Duty of canal water III ? 1000 hectares
S ? Delta of wheat IV ? 1000 cm
V ? 40 cm
VI ? 0.12
Which of the following options matches the parameters and the values correctly?
(A) P-I, Q-II, R-III, S-IV (B) P-III, Q-VI, R-I, S-V
(C) P-I, Q-V, R-VI, S-II (D) P-III, Q-II, R-V, S-IV
Q.20 Total Kjeldahl Nitrogen (TKN) concentration (mg/L as N) in domestic sewage is the sum of the
concentrations of:
(A) organic and inorganic nitrogen in sewage
(B) organic nitrogen and nitrate in sewage
(C) organic nitrogen and ammonia in sewage
(D) ammonia and nitrate in sewage
Q.21 Solid waste generated from an industry contains only two components, X and Y as shown in the
table below
Component Composition
(% weight)
Density
(kg/m
3
)
X c
1
?
1
Y c
2
?
2
Assuming (c
1
+ c
2
) = 100, the composite density of the solid waste ( ? ? is given by:
(A)
?
?
?
?
?
?
?
?
?
?
?
2
2
1
1
c c
100
(B)
c c
100
2
2
1
1
?
?
?
?
?
?
?
? ?
?
?
(C) ? ?
2 2 1 1
c c 100 ? ? ?
(D)
c c
100
2 2 1 1
2 1
?
?
?
?
?
?
?
?
? ? ?
? ?
GATE 2015 SET-1 CIVIL - CE
CE 5/13
Q.22 The penetration value of a bitumen sample tested at 25?C is 80. When this sample is heated to 60?C
and tested again, the needle of the penetration test apparatus penetrates the bitumen sample by d
mm. The value of d CANNOT be less than _______________ mm.
Q.23 Which of the following statements CANNOT be used to describe free flow speed (u
f
) of a traffic
stream?
(A) u
f
is the speed when flow is negligible
(B) u
f
is the speed when density is negligible
(C) u
f
is affected by geometry and surface conditions of the road
(D) u
f
is the speed at which flow is maximum and density is optimum
Q.24 Which of the following statements is FALSE?
(A) Plumb line is along the direction of gravity
(B) Mean Sea Level (MSL) is used as a reference surface for establishing the horizontal control
(C) Mean Sea Level (MSL) is a simplification of the Geoid
(D) Geoid is an equi-potential surface of gravity
Q.25 In a closed loop traverse of 1 km total length, the closing errors in departure and latitude are 0.3 m
and 0.4 m, respectively. The relative precision of this traverse will be:
(A) 1: 5000 (B) 1: 4000 (C) 1: 3000 (D) 1: 2000
GATE 2015 SET-1 CIVIL - CE
CE 6/13
Q. 26 ? Q. 55 carry two marks each.
Q.26 The smallest and largest Eigen values of the following matrix are:
?
?
?
?
?
?
?
?
?
?
?
?
?
5 3 2
6 4 4
2 2 3
(A) 1.5 and 2.5 (B) 0.5 and 2.5 (C) 1.0 and 3.0 (D) 1.0 and 2.0
Q.27 The quadratic equation ? 4 + 4 = 0 is to be solved numerically, starting with the initial guess
= 3. The Newton-Raphson method is applied once to get a new estimate and then the Secant
method is applied once using the initial guess and this new estimate. The estimated value of the root
after the application of the Secant method is _______________.
Q.28 Consider the following differential equation:
( d + d ) cos
= ( d ? dx) sin
Which of the following is the solution of the above equation (c is an arbitrary constant)?
(A)
cos
= (B)
sin
= (C) cos
= (D) sin
=
Q.29 Consider the following complex function:
f(z) =
9
(z ? 1)(z + 2)
Which of the following is one of the residues of the above function?
(A) ?1 (B) 9/16 (C) 2 (D) 9
Q.30 The directional derivative of the field ( , , ) = ? 3 in the direction of the vector
( ? + ? ? 2 ) at point (2, ?1, 4) is _______________.
Q.31 The composition of an air-entrained concrete is given below:
Water : 184 kg/m
3
Ordinary Portland Cement (OPC) : 368 kg/m
3
Sand : 606 kg/m
3
Coarse aggregate : 1155 kg/m
3
Assume the specific gravity of OPC, sand and coarse aggregate to be 3.14, 2.67 and 2.74,
respectively. The air content is _______________ liters/ m
3
.
GATE 2015 SET-1 CIVIL - CE
CE 7/13
Q.32 A bracket plate connected to a column flange transmits a load of 100 kN as shown in the following
figure. The maximum force for which the bolts should be designed is _______________ kN.
600
100 kN
75 75
75 75
All dimensions are in mm
Q.33 Consider the singly reinforced beam section given below (left figure). The stress block parameters
for the cross-section from IS:456-2000 are also given below (right figure). The moment of
resistance for the given section by the limit state method is _______________ kN-m.
Q.34 For formation of collapse mechanism in the following figure, the minimum value of P
u
is cM
p
/L.
M
p
and 3M
p
denote the plastic moment capacities of beam sections as shown in this figure. The
value of c is _______________.
GATE 2015 SET-1 CIVIL - CE
CE 8/13
Q.35 A tapered circular rod of diameter varying from 20 mm to 10 mm is connected to another uniform
circular rod of diameter 10 mm as shown in the following figure. Both bars are made of same
material with the modulus of elasticity, E = 2x10
5
MPa. When subjected to a load P = 30? kN, the
deflection at point A is _______________ mm.
Q.36 Two beams are connected by a linear spring as shown in the following figure. For a load P as
shown in the figure, the percentage of the applied load P carried by the spring is _______________.
GATE 2015 SET-1 CIVIL - CE
CE 9/13
Q.37 For the 2D truss with the applied loads shown below, the strain energy in the member XY is
_______________ kN-m. For member XY, assume AE = 30 kN, where A is cross-section area and E
is the modulus of elasticity.
Q.38 An earth embankment is to be constructed with compacted cohesionless soil. The volume of the
embankment is 5000 m
3
and the target dry unit weight is 16.2 kN/m
3
. Three nearby sites (see
figure below) have been identified from where the required soil can be transported to the
construction site. The void ratios (e) of different sites are shown in the figure. Assume the
specific gravity of soil to be 2.7 for all three sites. If the cost of transportation per km is twice the
cost of excavation per m
3
of borrow pits, which site would you choose as the most economic
solution? (Use unit weight of water = 10 kN/m
3
)
(A) Site X (B) Site Y (C) Site Z (D) Any of the sites
GATE 2015 SET-1 CIVIL - CE
CE 10/13
Q.39 A water tank is to be constructed on the soil deposit shown in the figure below. A circular footing
of diameter 3 m and depth of embedment 1 m has been designed to support the tank. The total
vertical load to be taken by the footing is 1500 kN. Assume the unit weight of water as 10 kN/m
3
and the load dispersion pattern as 2V:1H. The expected settlement of the tank due to primary
consolidation of the clay layer is _______________ mm.
Q.40
A 20 m thick clay layer is sandwiched between a silty sand layer and a gravelly sand layer. The
layer experiences 30 mm settlement in 2 years.
Given:
= for ? 60%
1.781 ? 0.933log
(100 ? ) for > 60%
where T
v
is the time factor and U is the degree of consolidation in %.
If the coefficient of consolidation of the layer is 0.003 cm
2
/s, the deposit will experience a total of
50 mm settlement in the next _______________ years.
Q.41 A non-homogeneous soil deposit consists of a silt layer sandwiched between a fine-sand layer at
top and a clay layer below. Permeability of the silt layer is 10 times the permeability of the clay
layer and one-tenth of the permeability of the sand layer. Thickness of the silt layer is 2 times the
thickness of the sand layer and two-third of the thickness of the clay layer. The ratio of equivalent
horizontal and equivalent vertical permeability of the deposit is ___________________.
GATE 2015 SET-1 CIVIL - CE
CE 11/13
Q.42 A square footing (2 m x 2 m) is subjected to an inclined point load, P as shown in the figure below.
The water table is located well below the base of the footing. Considering one-way eccentricity, the
net safe load carrying capacity of the footing for a factor of safety of 3.0 is _______________ kN.
The following factors may be used:
Bearing capacity factors: N
q
= 33.3, N
?
? ? ? ? ? ? ? ? ??Shape factors: F
qs
= F
?s
= 1.314; Depth factors: F
qd
= F
?d
= 1.113; Inclination factors: F
qi
= 0.444, F
?i
= 0.02
Q.43 Two reservoirs are connected through a 930 m long, 0.3 m diameter pipe, which has a gate valve.
The pipe entrance is sharp (loss coefficient = 0.5) and the valve is half-open (loss coefficient = 5.5).
The head difference between the two reservoirs is 20 m. Assume the friction factor for the pipe as
0.03 and g =10 m/s
2
. The discharge in the pipe accounting for all minor and major losses is
_______________ m
3
/s.
Q.44 A hydraulic jump is formed in a 2 m wide rectangular channel which is horizontal and frictionless.
The post-jump depth and velocity are 0.8 m and 1 m/s, respectively. The pre-jump velocity is
_______________ m/s. (use g = 10 m/s
2
)
Q.45 A short reach of a 2 m wide rectangular open channel has its bed level rising in the direction of
flow at a slope of 1 in 10000. It carries a discharge of 4 m
3
/s and its Manning?s roughness
coefficient is 0.01. The flow in this reach is gradually varying. At a certain section in this reach, the
depth of flow was measured as 0.5 m. The rate of change of the water depth with distance, dy/dx, at
this section is _______________ (use g = 10 m/s
2
).
Q.46 The drag force, F
D
, on a sphere kept in a uniform flow field depends on the diameter of the sphere,
D; flow velocity, V; fluid density, ?; and dynamic viscosity, ?. Which of the following options
represents the non-dimensional parameters which could be used to analyze this problem?
(A)
and
(B)
and
(C)
and
(D)
and
GATE 2015 SET-1 CIVIL - CE
CE 12/13
Q.47 In a catchment, there are four rain-gauge stations, P, Q, R, and S. Normal annual precipitation
values at these stations are 780 mm, 850 mm, 920 mm, and 980 mm, respectively. In the year 2013,
stations Q, R, and S, were operative but P was not. Using the normal ratio method, the precipitation
at station P for the year 2013 has been estimated as 860 mm. If the observed precipitation at
stations Q and R for the year 2013 were 930 mm and 1010 mm, respectively; what was the
observed precipitation (in mm) at station S for that year?
Q.48 The 4-hr unit hydrograph for a catchment is given in the table below. What would be the maximum
ordinate of the S-curve (in m
3
/s) derived from this hydrograph?
Time (hr) 0 2 4 6 8 10 12 14 16 18 20 22 24
Unit hydrograph
ordinate (m
3
/s)
0 0.6 3.1 10 13 9 5 2 0.7 0.3 0.2 0.1 0
Q.49 The concentration of Sulfur Dioxide (SO
2
) in ambient atmosphere was measured as 30 ?g/m
3
.
Under the same conditions, the above SO
2
concentration expressed in ppm is _______________.
Given: P/(RT) = 6 . 41 mol/m
3
; where, P = Pressure; T = Temperature; R = universal gas constant;
Molecular weight of SO
2
= 64.
Q.50 Consider a primary sedimentation tank (PST) in a water treatment plant with Surface Overflow
Rate (SOR) of 40 m
3
/m
2
/d. The diameter of the spherical particle which will have 90 percent
theoretical removal efficiency in this tank is _______________ ?m. Assume that settling velocity
of the particles in water is described by Stokes?s Law.
Given: Density of water = 1000 kg/m
3
; Density of particle = 2650 kg/m
3
; g = 9.81 m/s
2
; Kinematic
viscosity of water ( ? ? ?= 1.10 x 10
-6
m
2
/s
Q.51 The acceleration-time relationship for a vehicle subjected to non-uniform acceleration is,
= ( ? )
where, v is the speed in m/s, t is the time in s, and are parameters, and v
0
is the initial speed in
m/s. If the accelerating behavior of a vehicle, whose driver intends to overtake a slow moving
vehicle ahead, is described as,
= ( ? )
Considering ? = 2 m/s
2
, ? = 0.05 s
?1
and
= 1.3 m/s
at t = 3 s, the distance (in m) travelled by
the vehicle in 35 s is ______________.
Q.52 On a circular curve, the rate of superelevation is e. While negotiating the curve a vehicle comes to a
stop. It is seen that the stopped vehicle does not slide inwards (in the radial direction). The
coefficient of side friction is f. Which of the following is true:
(A) e ? f (B) f < e < 2 f (C) e ? 2f (D) none of the above
GATE 2015 SET-1 CIVIL - CE
CE 13/13
Q.53 A sign is required to be put up asking drivers to slow down to 30 km/h before entering Zone Y (see
figure). On this road, vehicles require 174 m to slow down to 30 km/h (the distance of 174 m
includes the distance travelled during the perception-reaction time of drivers). The sign can be read
by 6/6 vision drivers from a distance of 48 m. The sign is placed at a distance of x m from the start
of Zone Y so that even a 6/9 vision driver can slow down to 30 km/h before entering the zone. The
minimum value of x is _______________ m.
Q.54 In a survey work, three independent angles X, Y and Z were observed with weights W
X
, W
Y
, W
Z
,
respectively. The weight of the sum of angles X, Y and Z is given by:
(A) 1/ +
+
(B) +
+
(C) + +
(D) + +
Q.55 In a region with magnetic declination of 2
o
E, the magnetic Fore bearing (FB) of a line AB was
measured as N79
o
50'
E. There was local attraction at A. To determine the correct magnetic bearing
of the line, a point O was selected at which there was no local attraction. The magnetic FB of line
AO and OA were observed to be S52
o
40'E and N50
o
20'W, respectively. What is the true FB of line
AB?
(A) N81
o
50'E (B) N82
o
10'E (C) N84
o
10'E (D) N77
o
50'E
END OF THE QUESTION PAPER
FirstRanker.com - FirstRanker's Choice
This post was last modified on 19 December 2019