Download GTU (Gujarat Technological University) BE/BTech (Bachelor of Engineering / Bachelor of Technology) 2019 Summer 5th Sem New 2150206 Automotive Manufacturing Previous Question Paper
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?V (NEW) EXAMINATION ? SUMMER 2019
Subject Code: 2150206 Date: 03/06/2019
Subject Name: Automotive Manufacturing
Time: 02:30 PM TO 05:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
MARKS
Q.1 (a) Sketch the cross section of sand mould which is ready for pouring and
label the various important parts.
03
(b) Which are the key features can be improved by using of superfinising
process in the automotive component?
04
(c) Explain different types of material used for making pattern. with their
advantages and disadvantages in foundry technology.
07
Q.2 (a) Calculate the pouring time for a 400 x 200 x 125mm casting using a 25 x
25 mm ingate and a constant head 0f 125 mm.
03
(b) Explain LBM (laser beam machining) process. 04
(c) Prepare the list of different types of gating system used in casting? Also
discuss in brief top gate and bottom gate with neat sketch
07
OR
(c) List the defects that are generally found in welding? Describe their cause
and remedies.
07
Q.3 (a) What is meant by ?penetration?? Explain its relevance to arc welding. 03
(b) What do you mean filler metal? Explain its importance in welding,
giving its composition.
04
(c) Describe the principal and working of oxy-fuel gas welding. With neat
sketch layout.
07
OR
Q.3 (a) List the different types of core and only draw the sketch diagram for any
three.
03
(b) Explain the method of determining the moisture content in moulding
sand.
04
(c) Make a list of all possible casting defects with figure and give their
causes and remedies.
07
Q.4 (a) What are chills? State their functions? 03
(b) List the various processes of metal working? Draw the different
arrangements of rolling processes.
04
(c) Explain step wise procedure of investment casting process in automotive
manufacturing.
07
OR
Q.4 (a) Explain the backward hot extrusion processes in manufacturing. 03
(b) Wire a short note on rod and tube drawing process. 04
(c) List down various operation of shearing process and explain any one of
them with neat sketch diagram..
07
Q.5 (a) Discuss the material used to made jigs and fixture. 03
(b) Write a short note on the machine forged process with sketch. 04
(c) With the help sketch diagram explain the Tungsten inert gas welding
process.
07
OR
FirstRanker.com - FirstRanker's Choice
1
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?V (NEW) EXAMINATION ? SUMMER 2019
Subject Code: 2150206 Date: 03/06/2019
Subject Name: Automotive Manufacturing
Time: 02:30 PM TO 05:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
MARKS
Q.1 (a) Sketch the cross section of sand mould which is ready for pouring and
label the various important parts.
03
(b) Which are the key features can be improved by using of superfinising
process in the automotive component?
04
(c) Explain different types of material used for making pattern. with their
advantages and disadvantages in foundry technology.
07
Q.2 (a) Calculate the pouring time for a 400 x 200 x 125mm casting using a 25 x
25 mm ingate and a constant head 0f 125 mm.
03
(b) Explain LBM (laser beam machining) process. 04
(c) Prepare the list of different types of gating system used in casting? Also
discuss in brief top gate and bottom gate with neat sketch
07
OR
(c) List the defects that are generally found in welding? Describe their cause
and remedies.
07
Q.3 (a) What is meant by ?penetration?? Explain its relevance to arc welding. 03
(b) What do you mean filler metal? Explain its importance in welding,
giving its composition.
04
(c) Describe the principal and working of oxy-fuel gas welding. With neat
sketch layout.
07
OR
Q.3 (a) List the different types of core and only draw the sketch diagram for any
three.
03
(b) Explain the method of determining the moisture content in moulding
sand.
04
(c) Make a list of all possible casting defects with figure and give their
causes and remedies.
07
Q.4 (a) What are chills? State their functions? 03
(b) List the various processes of metal working? Draw the different
arrangements of rolling processes.
04
(c) Explain step wise procedure of investment casting process in automotive
manufacturing.
07
OR
Q.4 (a) Explain the backward hot extrusion processes in manufacturing. 03
(b) Wire a short note on rod and tube drawing process. 04
(c) List down various operation of shearing process and explain any one of
them with neat sketch diagram..
07
Q.5 (a) Discuss the material used to made jigs and fixture. 03
(b) Write a short note on the machine forged process with sketch. 04
(c) With the help sketch diagram explain the Tungsten inert gas welding
process.
07
OR
2
Q.5 (a) Explain 3-2-1 locating method for rectangular block. 03
(b) Which are the consideration taken while designing jigs and fixtures? 04
(c) Explain in detail the Essential features of Jigs and Fixtures. 07
*************
FirstRanker.com - FirstRanker's Choice
This post was last modified on 20 February 2020