Download GTU (Gujarat Technological University) BE/BTech (Bachelor of Engineering / Bachelor of Technology) 2019 Summer 1st And 2nd Sem (New And SPFU) 2110003 Computer Programming And Utilization Previous Question Paper
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?I &II (NEW) EXAMINATION ? SUMMER-2019
Subject Code: 2110003 Date: 10/06/2019
Subject Name: Computer Programming and Utilization
Time: 10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Question No.1 is compulsory. Attempt any four out of remaining six questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q.1
Mark
(a) Objective Question (MCQ) 07
1. Which is output device?
(a) Barcode Reader (c) Scanner
(b) LCD (d) Keypad
2. C-Language is ____________________.
(a) Machine Dependent (c) Machine Independent
(b) Partially Machine Dependent (d) None of above.
3. Which one of following is volatile memory?
(a) SRAM (c) Flash
(b) EPROM (d) Hard disk
4. How many times following loop will be rotated?
int a = 10, b = 1;
while(a>b)
{ a--; b++; }
(a) 5 (c) 4
(b) 10 (d) 1
5. Which of the following is correct C statement to print variable a?
(a) printf(?a?); (c) printf(?%d?);
(b) printf(?%d?, a); (d) printf(?%a?);
6. Which one of following loop rotates infinite time?
(a) for( ; ; ) (d) only a and c
(b) do { ?. } While(1<10); (e) all of a, b, c
(c) while (100)
7. Switch case statement cannot be applicable on _________ data type.
(a) int (c) enumerated
(b) char (d) float
(b) Objective Question (MCQ) 07
1. Which one is invalid variable name?
(a) int_a (c) case_c
(b) temp1 (d) 1temp
2. Which one of following statement doesn?t increment variable a?
(a) a++ (c) ++a
(b) a += 1 (d) a = +1
FirstRanker.com - FirstRanker's Choice
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?I &II (NEW) EXAMINATION ? SUMMER-2019
Subject Code: 2110003 Date: 10/06/2019
Subject Name: Computer Programming and Utilization
Time: 10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Question No.1 is compulsory. Attempt any four out of remaining six questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q.1
Mark
(a) Objective Question (MCQ) 07
1. Which is output device?
(a) Barcode Reader (c) Scanner
(b) LCD (d) Keypad
2. C-Language is ____________________.
(a) Machine Dependent (c) Machine Independent
(b) Partially Machine Dependent (d) None of above.
3. Which one of following is volatile memory?
(a) SRAM (c) Flash
(b) EPROM (d) Hard disk
4. How many times following loop will be rotated?
int a = 10, b = 1;
while(a>b)
{ a--; b++; }
(a) 5 (c) 4
(b) 10 (d) 1
5. Which of the following is correct C statement to print variable a?
(a) printf(?a?); (c) printf(?%d?);
(b) printf(?%d?, a); (d) printf(?%a?);
6. Which one of following loop rotates infinite time?
(a) for( ; ; ) (d) only a and c
(b) do { ?. } While(1<10); (e) all of a, b, c
(c) while (100)
7. Switch case statement cannot be applicable on _________ data type.
(a) int (c) enumerated
(b) char (d) float
(b) Objective Question (MCQ) 07
1. Which one is invalid variable name?
(a) int_a (c) case_c
(b) temp1 (d) 1temp
2. Which one of following statement doesn?t increment variable a?
(a) a++ (c) ++a
(b) a += 1 (d) a = +1
3. For following code, what should be value of X and Y?
M = 9; N = 10;
X = M && N;
Y = M & N;
(a) X = 1, Y = 8 (c) X = 1, Y = 1
(b) X = 8, Y = 8 (d) None of above
4. What is output of following program ?
void main( )
{
int z = 10;
float z = 10;
printf(?%d?,z);
}
(a) 10.00 (c) 10
(b) Compile time error (d) Run time error
5. The Function __________ obtains block of memory run time.
(a) malloc() (c) calloc()
(b) Both malloc() and calloc() (d) free()
6. Which of the following is true about FILE *fp
(a) FILE is keyword in C for representing files and fp is variable of
FILE type.
(b) FILE is a structure and fp is pointer to structure of FILE type.
(c) FILE is stream
(d) FILE is buffered stream
7. Array and Structure can contain elements of _______ and ______ data
type respectively.
(a) same, different (c) same, same
(b) different, Same (d) different , different
Q.2 (a) Define (1) Higher Level Language (2) Lower Level Language (3)
Machine Level Language
03
(b) Sketch flowchart to convert seconds into hour, minute and second.
(Hint : 3700 seconds => 1 hr , 1 minute , 40 second)
04
(c) Describe assignment, sizeof( ) and ternary operator with example. 07
Q.3 (a) Write C program to find area and perimeter of rectangle. 03
(b) Describe Enumurated data type with example. 04
(c) Write C program to get 20 data from user. Find sum, average, maximum
and minimum number.
07
Q.4 (a) Write a program to add first n numbers. Get value of n from user. 03
(b) Describe switch case statement with example. 04
(c) Write a C program to display given pattern
1
1 2
1 2 3
1 2 3 4
1 2 3 4 5
07
FirstRanker.com - FirstRanker's Choice
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?I &II (NEW) EXAMINATION ? SUMMER-2019
Subject Code: 2110003 Date: 10/06/2019
Subject Name: Computer Programming and Utilization
Time: 10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Question No.1 is compulsory. Attempt any four out of remaining six questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q.1
Mark
(a) Objective Question (MCQ) 07
1. Which is output device?
(a) Barcode Reader (c) Scanner
(b) LCD (d) Keypad
2. C-Language is ____________________.
(a) Machine Dependent (c) Machine Independent
(b) Partially Machine Dependent (d) None of above.
3. Which one of following is volatile memory?
(a) SRAM (c) Flash
(b) EPROM (d) Hard disk
4. How many times following loop will be rotated?
int a = 10, b = 1;
while(a>b)
{ a--; b++; }
(a) 5 (c) 4
(b) 10 (d) 1
5. Which of the following is correct C statement to print variable a?
(a) printf(?a?); (c) printf(?%d?);
(b) printf(?%d?, a); (d) printf(?%a?);
6. Which one of following loop rotates infinite time?
(a) for( ; ; ) (d) only a and c
(b) do { ?. } While(1<10); (e) all of a, b, c
(c) while (100)
7. Switch case statement cannot be applicable on _________ data type.
(a) int (c) enumerated
(b) char (d) float
(b) Objective Question (MCQ) 07
1. Which one is invalid variable name?
(a) int_a (c) case_c
(b) temp1 (d) 1temp
2. Which one of following statement doesn?t increment variable a?
(a) a++ (c) ++a
(b) a += 1 (d) a = +1
3. For following code, what should be value of X and Y?
M = 9; N = 10;
X = M && N;
Y = M & N;
(a) X = 1, Y = 8 (c) X = 1, Y = 1
(b) X = 8, Y = 8 (d) None of above
4. What is output of following program ?
void main( )
{
int z = 10;
float z = 10;
printf(?%d?,z);
}
(a) 10.00 (c) 10
(b) Compile time error (d) Run time error
5. The Function __________ obtains block of memory run time.
(a) malloc() (c) calloc()
(b) Both malloc() and calloc() (d) free()
6. Which of the following is true about FILE *fp
(a) FILE is keyword in C for representing files and fp is variable of
FILE type.
(b) FILE is a structure and fp is pointer to structure of FILE type.
(c) FILE is stream
(d) FILE is buffered stream
7. Array and Structure can contain elements of _______ and ______ data
type respectively.
(a) same, different (c) same, same
(b) different, Same (d) different , different
Q.2 (a) Define (1) Higher Level Language (2) Lower Level Language (3)
Machine Level Language
03
(b) Sketch flowchart to convert seconds into hour, minute and second.
(Hint : 3700 seconds => 1 hr , 1 minute , 40 second)
04
(c) Describe assignment, sizeof( ) and ternary operator with example. 07
Q.3 (a) Write C program to find area and perimeter of rectangle. 03
(b) Describe Enumurated data type with example. 04
(c) Write C program to get 20 data from user. Find sum, average, maximum
and minimum number.
07
Q.4 (a) Write a program to add first n numbers. Get value of n from user. 03
(b) Describe switch case statement with example. 04
(c) Write a C program to display given pattern
1
1 2
1 2 3
1 2 3 4
1 2 3 4 5
07
Q.5 (a) Describe dynamic memory allocation. Give advantages and
disadvantages of it.
03
(b) Describe break and continue statement with suitable example. 04
(c) Write a C program to do following task.
(1) Take string from user and print in upper-case
(2) Find string length without using strlen() function.
07
Q.6 (a) Give merits and demerits of Union over structure. 03
(b) Design structure with following elements :
Name of employ, basic, da, ta , deduction , net_salary
Give the variety of way to access individual elements of structure..
04
(c) Describe types of function based on arguments and return type. 07
Q.7 (a) Describe following file handling functions.
(1) fopen()
(2) fseek()
(3) fgetc()
03
(b) Write C program to copy content of file ?D:\home\avs.txt? into new text
file ?ftel.txt? in E drive .
04
(c) Define Pointer. How to initialize integer pointer ? Describe pointer to
array with example.
07
***********
FirstRanker.com - FirstRanker's Choice
This post was last modified on 20 February 2020