Download GTU (Gujarat Technological University) BE/BTech (Bachelor of Engineering / Bachelor of Technology) 2018 Winter 3rd Sem New 2132104 Testing Of Metals And Alloys Previous Question Paper
1
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER?III (New) EXAMINATION ? WINTER 2018
Subject Code:2132104 Date:05/12/2018
Subject Name:Testing of Metals and Alloys
Time:10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
MARKS
Q.1 (a) Explain the objective of testing of materials. 03
(b) Define the following
1) Ductility,
2) Toughness,
3) Young?s Modulus,
4) % Elongation.
04
(c) Draw, explain and differentiate engineering and true stress-strain
curve.
07
Q.2 (a) Multiple Choice Questions:
1) Whenever some external system of forces acts on a body,
it undergoes some deformation. As the body undergoes
some deformation, it sets up some resistance to the
deformation. This resistance per unit area to deformation,
is called
a. Strain
b. Pressure
c. Stress
d. Modulus of elasticity
2) Modulus of rigidity can be defined as the ratio of
a. Linear stress to linear strain
b. Lateral strain to linear strain
c. Linear stress to lateral strain
d. Shear stress to shear strain
3) The unit for Young?s modulus is
a. N
b. N/m
c. N/m
2
d. No unit
03
(b) Explain Izod impact test. 04
(c) What is calibration of instruments? Discuss the importance of
calibration of testing instruments
07
OR
(c) Classify material testing methods. Describe the criteria for
selection of testing method.
07
Q.3 (a) What do you understand by rebound Hardness test? 03
(b) List Rockwell Hardness Test advantages & limitations. 04
(c) Discuss about Vickers Hardness Test method. Enlist advantages
and limitations.
07
OR
www.FirstRanker.com www.FirstRanker.com
www.FirstRanker.com
FirstRanker.com - FirstRanker's Choice
www.FirstRanker.com
1
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER?III (New) EXAMINATION ? WINTER 2018
Subject Code:2132104 Date:05/12/2018
Subject Name:Testing of Metals and Alloys
Time:10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
MARKS
Q.1 (a) Explain the objective of testing of materials. 03
(b) Define the following
1) Ductility,
2) Toughness,
3) Young?s Modulus,
4) % Elongation.
04
(c) Draw, explain and differentiate engineering and true stress-strain
curve.
07
Q.2 (a) Multiple Choice Questions:
1) Whenever some external system of forces acts on a body,
it undergoes some deformation. As the body undergoes
some deformation, it sets up some resistance to the
deformation. This resistance per unit area to deformation,
is called
a. Strain
b. Pressure
c. Stress
d. Modulus of elasticity
2) Modulus of rigidity can be defined as the ratio of
a. Linear stress to linear strain
b. Lateral strain to linear strain
c. Linear stress to lateral strain
d. Shear stress to shear strain
3) The unit for Young?s modulus is
a. N
b. N/m
c. N/m
2
d. No unit
03
(b) Explain Izod impact test. 04
(c) What is calibration of instruments? Discuss the importance of
calibration of testing instruments
07
OR
(c) Classify material testing methods. Describe the criteria for
selection of testing method.
07
Q.3 (a) What do you understand by rebound Hardness test? 03
(b) List Rockwell Hardness Test advantages & limitations. 04
(c) Discuss about Vickers Hardness Test method. Enlist advantages
and limitations.
07
OR
www.FirstRanker.com www.FirstRanker.com
www.FirstRanker.com
www.FirstRanker.com
2
Q.3 (a) Define creep. Draw a typical creep curve. 03
(b) Discuss Factors affecting creep behavior. 04
(c) ?Testing of material is an important task for industry? ? justify
comment.
07
Q.4 (a) Write a note on yield point phenomena. 03
(b) Give mechanism of cup and cone type fracture. 04
(c) Explain the procedure of tensile testing. 07
OR
Q.4 (a) Discuss the effect of temperature on flow properties. 03
(b) Draw and describe S-N curves for ferrous metals. 04
(c) What is meant by fatigue failure? Write a note on fatigue
Mechanisms in metals
07
Q.5 (a) Differentiate between ductile and brittle fracture. 03
(b) Explain Mechanism of Brittle fracture propagation. 04
(c) What is ductile to brittle transition behavior and it?s significance?
Draw suitable diagram.
07
OR
Q.5 (a) Describe the Bauschinger effect. 03
(b) Write the formula for Brinell and Knoop hardness along with
symbol description.
04
(c) Describe Charpy Impact test. Derive Relationship for energy
absorbed by specimen.
07
*************
www.FirstRanker.com www.FirstRanker.com
www.FirstRanker.com
FirstRanker.com - FirstRanker's Choice
This post was last modified on 20 February 2020