Download GTU (Gujarat Technological University) BE/BTech (Bachelor of Engineering / Bachelor of Technology) 2019 Summer 8th Sem New 2180909 Power System Operation And Control Previous Question Paper
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?VIII(NEW) EXAMINATION ? SUMMER 2019
Subject Code:2180909 Date:13/05/2019
Subject Name:Power System Operation and Control
Time:10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
MARKS
Q.1 (a) Define the voltage regulation 03
(b) Explain what you mean by state estimation of power system and how
does it differ from load flow solutions.
04
(c) Two generating units rated for 250 MW and 400 MW have governor
speed regulation of 6.0 and 6.4 percent, respectively, from no-load to
full-load, respectively. They are operating in parallel and share a load of
500 MW. Assuming free governor action, determine the load shared by
each unit.
07
Q.2 (a) Enumerate the need for restructuring. 03
(b) Write short note on System monitoring 04
(c) Develop step by step the mathematical model for a state estimator using
line power flows with the help of weighted least square method as
suggested by Dopazo et al.
07
OR
(c) Describe the different types of market model 07
Q.3 (a) Define the surge impedance loading (SIL) of a transmission line. 03
(b) Find the capacity of static VAR Compensator to be installed at a bus with
?5% voltage fluctuation. The short circuit capacity is 5000 MVA.
04
(c) What do you mean by ?Bad Data? in power system? How does it creep
in while obtaining a good state estimator? Explain clearly how it is taken
care of by using theory of probability
07
OR
Q.3 (a) Explain how system blackout occur. 03
(b) A 250-MW, 60-Hz turbine generator set has a speed regulation of 5
percent based on its own rating. The generator frequency decreases from
60 Hz to a steady state value of 59.7Hz. Determine the increase in the
turbine power output.
04
(c) Explain factors affecting power system security. 07
Q.4 (a) What do you mean by line load ability? 03
(b) Describe the need for deregulation of various power system
04
(c)
Drive the expression for steady state frequency change for single area system
with the following cases.
I. Changes in load with fixed speed
2.Changes in speed with fixed demand
07
FirstRanker.com - FirstRanker's Choice
1
Seat No.: ________ Enrolment No.___________
GUJARAT TECHNOLOGICAL UNIVERSITY
BE - SEMESTER ?VIII(NEW) EXAMINATION ? SUMMER 2019
Subject Code:2180909 Date:13/05/2019
Subject Name:Power System Operation and Control
Time:10:30 AM TO 01:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
MARKS
Q.1 (a) Define the voltage regulation 03
(b) Explain what you mean by state estimation of power system and how
does it differ from load flow solutions.
04
(c) Two generating units rated for 250 MW and 400 MW have governor
speed regulation of 6.0 and 6.4 percent, respectively, from no-load to
full-load, respectively. They are operating in parallel and share a load of
500 MW. Assuming free governor action, determine the load shared by
each unit.
07
Q.2 (a) Enumerate the need for restructuring. 03
(b) Write short note on System monitoring 04
(c) Develop step by step the mathematical model for a state estimator using
line power flows with the help of weighted least square method as
suggested by Dopazo et al.
07
OR
(c) Describe the different types of market model 07
Q.3 (a) Define the surge impedance loading (SIL) of a transmission line. 03
(b) Find the capacity of static VAR Compensator to be installed at a bus with
?5% voltage fluctuation. The short circuit capacity is 5000 MVA.
04
(c) What do you mean by ?Bad Data? in power system? How does it creep
in while obtaining a good state estimator? Explain clearly how it is taken
care of by using theory of probability
07
OR
Q.3 (a) Explain how system blackout occur. 03
(b) A 250-MW, 60-Hz turbine generator set has a speed regulation of 5
percent based on its own rating. The generator frequency decreases from
60 Hz to a steady state value of 59.7Hz. Determine the increase in the
turbine power output.
04
(c) Explain factors affecting power system security. 07
Q.4 (a) What do you mean by line load ability? 03
(b) Describe the need for deregulation of various power system
04
(c)
Drive the expression for steady state frequency change for single area system
with the following cases.
I. Changes in load with fixed speed
2.Changes in speed with fixed demand
07
2
OR
Q.4 (a) Demonstrate why the frequency and voltage to be regulated in power
system?
03
(b) Discuss the importance and features of congestion management in
deregulated power system.
04
(c) Explain the following with the help of circuit diagrams.
1.Optimal dispatch 2 Post contingency 3 Secure dispatch 4 Secure post-
contingency
07
Q.5 (a) Which method of load forecasting would you suggest for long term and
why?
03
(b) Explain various Players involved in the Indian Power sector 04
(c) Develop an expression to find the magnitude of reactive power
requirement for voltage control in log transmission lines.
07
OR
Q.5 (a) What is meant by free governor operation? 03
(b) How is the forecaster's knowledge and intuition considered superior to
any load forecasting method? Should a forecaster intervene to modify a
forecast, when, why and how
04
(c) Explain with the help of block diagram automatic voltage regulator of
trubo generators.
07
*************
FirstRanker.com - FirstRanker's Choice
This post was last modified on 20 February 2020